Merge remote-tracking branches 'asoc/fix/atmel', 'asoc/fix/fsl', 'asoc/fix/tegra...

[linux-drm-fsl-dcu.git] / drivers / staging / comedi / drivers / s626.c

/*
 * comedi/drivers/s626.c
 * Sensoray s626 Comedi driver
 *
 * COMEDI - Linux Control and Measurement Device Interface
 * Copyright (C) 2000 David A. Schleef <ds@schleef.org>
 *
 * Based on Sensoray Model 626 Linux driver Version 0.2
 * Copyright (C) 2002-2004 Sensoray Co., Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

/*
 * Driver: s626
 * Description: Sensoray 626 driver
 * Devices: [Sensoray] 626 (s626)
 * Authors: Gianluca Palli <gpalli@deis.unibo.it>,
 * Updated: Fri, 15 Feb 2008 10:28:42 +0000
 * Status: experimental

 * Configuration options: not applicable, uses PCI auto config

 * INSN_CONFIG instructions:
 *   analog input:
 *    none
 *
 *   analog output:
 *    none
 *
 *   digital channel:
 *    s626 has 3 dio subdevices (2,3 and 4) each with 16 i/o channels
 *    supported configuration options:
 *    INSN_CONFIG_DIO_QUERY
 *    COMEDI_INPUT
 *    COMEDI_OUTPUT
 *
 *   encoder:
 *    Every channel must be configured before reading.
 *
 *   Example code
 *
 *    insn.insn=INSN_CONFIG;   //configuration instruction
 *    insn.n=1;                //number of operation (must be 1)
 *    insn.data=&initialvalue; //initial value loaded into encoder
 *                             //during configuration
 *    insn.subdev=5;           //encoder subdevice
 *    insn.chanspec=CR_PACK(encoder_channel,0,AREF_OTHER); //encoder_channel
 *                                                         //to configure
 *
 *    comedi_do_insn(cf,&insn); //executing configuration
 */

#include <linux/module.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/types.h>

#include "../comedidev.h"

#include "comedi_fc.h"
#include "s626.h"

struct s626_buffer_dma {
        dma_addr_t physical_base;
        void *logical_base;
};

struct s626_private {
        void __iomem *mmio;
        uint8_t ai_cmd_running;         /* ai_cmd is running */
        uint8_t ai_continuous;          /* continuous acquisition */
        int ai_sample_count;            /* number of samples to acquire */
        unsigned int ai_sample_timer;   /* time between samples in
                                         * units of the timer */
        int ai_convert_count;           /* conversion counter */
        unsigned int ai_convert_timer;  /* time between conversion in
                                         * units of the timer */
        uint16_t counter_int_enabs;     /* counter interrupt enable mask
                                         * for MISC2 register */
        uint8_t adc_items;              /* number of items in ADC poll list */
        struct s626_buffer_dma rps_buf; /* DMA buffer used to hold ADC (RPS1)
                                         * program */
        struct s626_buffer_dma ana_buf; /* DMA buffer used to receive ADC data
                                         * and hold DAC data */
        uint32_t *dac_wbuf;             /* pointer to logical adrs of DMA buffer
                                         * used to hold DAC data */
        uint16_t dacpol;                /* image of DAC polarity register */
        uint8_t trim_setpoint[12];      /* images of TrimDAC setpoints */
        uint32_t i2c_adrs;              /* I2C device address for onboard EEPROM
                                         * (board rev dependent) */
        unsigned int ao_readback[S626_DAC_CHANNELS];
};

/* COUNTER OBJECT ------------------------------------------------ */
struct s626_enc_info {
        /* Pointers to functions that differ for A and B counters: */
        /* Return clock enable. */
        uint16_t(*get_enable)(struct comedi_device *dev,
                              const struct s626_enc_info *k);
        /* Return interrupt source. */
        uint16_t(*get_int_src)(struct comedi_device *dev,
                               const struct s626_enc_info *k);
        /* Return preload trigger source. */
        uint16_t(*get_load_trig)(struct comedi_device *dev,
                                 const struct s626_enc_info *k);
        /* Return standardized operating mode. */
        uint16_t(*get_mode)(struct comedi_device *dev,
                            const struct s626_enc_info *k);
        /* Generate soft index strobe. */
        void (*pulse_index)(struct comedi_device *dev,
                            const struct s626_enc_info *k);
        /* Program clock enable. */
        void (*set_enable)(struct comedi_device *dev,
                           const struct s626_enc_info *k, uint16_t enab);
        /* Program interrupt source. */
        void (*set_int_src)(struct comedi_device *dev,
                            const struct s626_enc_info *k, uint16_t int_source);
        /* Program preload trigger source. */
        void (*set_load_trig)(struct comedi_device *dev,
                              const struct s626_enc_info *k, uint16_t trig);
        /* Program standardized operating mode. */
        void (*set_mode)(struct comedi_device *dev,
                         const struct s626_enc_info *k, uint16_t setup,
                         uint16_t disable_int_src);
        /* Reset event capture flags. */
        void (*reset_cap_flags)(struct comedi_device *dev,
                                const struct s626_enc_info *k);

        uint16_t my_cra;        /* address of CRA register */
        uint16_t my_crb;        /* address of CRB register */
        uint16_t my_latch_lsw;  /* address of Latch least-significant-word
                                 * register */
        uint16_t my_event_bits[4]; /* bit translations for IntSrc -->RDMISC2 */
};

/* Counter overflow/index event flag masks for RDMISC2. */
#define S626_INDXMASK(C) (1 << (((C) > 2) ? ((C) * 2 - 1) : ((C) * 2 +  4)))
#define S626_OVERMASK(C) (1 << (((C) > 2) ? ((C) * 2 + 5) : ((C) * 2 + 10)))
#define S626_EVBITS(C)  { 0, S626_OVERMASK(C), S626_INDXMASK(C), \
                          S626_OVERMASK(C) | S626_INDXMASK(C) }

/*
 * Translation table to map IntSrc into equivalent RDMISC2 event flag  bits.
 * static const uint16_t s626_event_bits[][4] =
 *     { S626_EVBITS(0), S626_EVBITS(1), S626_EVBITS(2), S626_EVBITS(3),
 *       S626_EVBITS(4), S626_EVBITS(5) };
 */

/*
 * Enable/disable a function or test status bit(s) that are accessed
 * through Main Control Registers 1 or 2.
 */
static void s626_mc_enable(struct comedi_device *dev,
                           unsigned int cmd, unsigned int reg)
{
        struct s626_private *devpriv = dev->private;
        unsigned int val = (cmd << 16) | cmd;

        mmiowb();
        writel(val, devpriv->mmio + reg);
}

static void s626_mc_disable(struct comedi_device *dev,
                            unsigned int cmd, unsigned int reg)
{
        struct s626_private *devpriv = dev->private;

        writel(cmd << 16 , devpriv->mmio + reg);
        mmiowb();
}

static bool s626_mc_test(struct comedi_device *dev,
                         unsigned int cmd, unsigned int reg)
{
        struct s626_private *devpriv = dev->private;
        unsigned int val;

        val = readl(devpriv->mmio + reg);

        return (val & cmd) ? true : false;
}

#define S626_BUGFIX_STREG(REGADRS)   ((REGADRS) - 4)

/* Write a time slot control record to TSL2. */
#define S626_VECTPORT(VECTNUM)          (S626_P_TSL2 + ((VECTNUM) << 2))

static const struct comedi_lrange s626_range_table = {
        2, {
                BIP_RANGE(5),
                BIP_RANGE(10),
        }
};

/*
 * Execute a DEBI transfer.  This must be called from within a critical section.
 */
static void s626_debi_transfer(struct comedi_device *dev)
{
        struct s626_private *devpriv = dev->private;

        /* Initiate upload of shadow RAM to DEBI control register */
        s626_mc_enable(dev, S626_MC2_UPLD_DEBI, S626_P_MC2);

        /*
         * Wait for completion of upload from shadow RAM to
         * DEBI control register.
         */
        while (!s626_mc_test(dev, S626_MC2_UPLD_DEBI, S626_P_MC2))
                ;

        /* Wait until DEBI transfer is done */
        while (readl(devpriv->mmio + S626_P_PSR) & S626_PSR_DEBI_S)
                ;
}

/*
 * Read a value from a gate array register.
 */
static uint16_t s626_debi_read(struct comedi_device *dev, uint16_t addr)
{
        struct s626_private *devpriv = dev->private;

        /* Set up DEBI control register value in shadow RAM */
        writel(S626_DEBI_CMD_RDWORD | addr, devpriv->mmio + S626_P_DEBICMD);

        /*  Execute the DEBI transfer. */
        s626_debi_transfer(dev);

        return readl(devpriv->mmio + S626_P_DEBIAD);
}

/*
 * Write a value to a gate array register.
 */
static void s626_debi_write(struct comedi_device *dev, uint16_t addr,
                            uint16_t wdata)
{
        struct s626_private *devpriv = dev->private;

        /* Set up DEBI control register value in shadow RAM */
        writel(S626_DEBI_CMD_WRWORD | addr, devpriv->mmio + S626_P_DEBICMD);
        writel(wdata, devpriv->mmio + S626_P_DEBIAD);

        /*  Execute the DEBI transfer. */
        s626_debi_transfer(dev);
}

/*
 * Replace the specified bits in a gate array register.  Imports: mask
 * specifies bits that are to be preserved, wdata is new value to be
 * or'd with the masked original.
 */
static void s626_debi_replace(struct comedi_device *dev, unsigned int addr,
                              unsigned int mask, unsigned int wdata)
{
        struct s626_private *devpriv = dev->private;
        unsigned int val;

        addr &= 0xffff;
        writel(S626_DEBI_CMD_RDWORD | addr, devpriv->mmio + S626_P_DEBICMD);
        s626_debi_transfer(dev);

        writel(S626_DEBI_CMD_WRWORD | addr, devpriv->mmio + S626_P_DEBICMD);
        val = readl(devpriv->mmio + S626_P_DEBIAD);
        val &= mask;
        val |= wdata;
        writel(val & 0xffff, devpriv->mmio + S626_P_DEBIAD);
        s626_debi_transfer(dev);
}

/* **************  EEPROM ACCESS FUNCTIONS  ************** */

static uint32_t s626_i2c_handshake(struct comedi_device *dev, uint32_t val)
{
        struct s626_private *devpriv = dev->private;
        unsigned int ctrl;

        /* Write I2C command to I2C Transfer Control shadow register */
        writel(val, devpriv->mmio + S626_P_I2CCTRL);

        /*
         * Upload I2C shadow registers into working registers and
         * wait for upload confirmation.
         */
        s626_mc_enable(dev, S626_MC2_UPLD_IIC, S626_P_MC2);
        while (!s626_mc_test(dev, S626_MC2_UPLD_IIC, S626_P_MC2))
                ;

        /* Wait until I2C bus transfer is finished or an error occurs */
        do {
                ctrl = readl(devpriv->mmio + S626_P_I2CCTRL);
        } while ((ctrl & (S626_I2C_BUSY | S626_I2C_ERR)) == S626_I2C_BUSY);

        /* Return non-zero if I2C error occurred */
        return ctrl & S626_I2C_ERR;
}

/* Read uint8_t from EEPROM. */
static uint8_t s626_i2c_read(struct comedi_device *dev, uint8_t addr)
{
        struct s626_private *devpriv = dev->private;

        /*
         * Send EEPROM target address:
         *  Byte2 = I2C command: write to I2C EEPROM device.
         *  Byte1 = EEPROM internal target address.
         *  Byte0 = Not sent.
         */
        if (s626_i2c_handshake(dev, S626_I2C_B2(S626_I2C_ATTRSTART,
                                                devpriv->i2c_adrs) |
                                    S626_I2C_B1(S626_I2C_ATTRSTOP, addr) |
                                    S626_I2C_B0(S626_I2C_ATTRNOP, 0)))
                /* Abort function and declare error if handshake failed. */
                return 0;

        /*
         * Execute EEPROM read:
         *  Byte2 = I2C command: read from I2C EEPROM device.
         *  Byte1 receives uint8_t from EEPROM.
         *  Byte0 = Not sent.
         */
        if (s626_i2c_handshake(dev, S626_I2C_B2(S626_I2C_ATTRSTART,
                                           (devpriv->i2c_adrs | 1)) |
                                    S626_I2C_B1(S626_I2C_ATTRSTOP, 0) |
                                    S626_I2C_B0(S626_I2C_ATTRNOP, 0)))
                /* Abort function and declare error if handshake failed. */
                return 0;

        return (readl(devpriv->mmio + S626_P_I2CCTRL) >> 16) & 0xff;
}

/* ***********  DAC FUNCTIONS *********** */

/* TrimDac LogicalChan-to-PhysicalChan mapping table. */
static const uint8_t s626_trimchan[] = { 10, 9, 8, 3, 2, 7, 6, 1, 0, 5, 4 };

/* TrimDac LogicalChan-to-EepromAdrs mapping table. */
static const uint8_t s626_trimadrs[] = {
        0x40, 0x41, 0x42, 0x50, 0x51, 0x52, 0x53, 0x60, 0x61, 0x62, 0x63
};

/*
 * Private helper function: Transmit serial data to DAC via Audio
 * channel 2.  Assumes: (1) TSL2 slot records initialized, and (2)
 * dacpol contains valid target image.
 */
static void s626_send_dac(struct comedi_device *dev, uint32_t val)
{
        struct s626_private *devpriv = dev->private;

        /* START THE SERIAL CLOCK RUNNING ------------- */

        /*
         * Assert DAC polarity control and enable gating of DAC serial clock
         * and audio bit stream signals.  At this point in time we must be
         * assured of being in time slot 0.  If we are not in slot 0, the
         * serial clock and audio stream signals will be disabled; this is
         * because the following s626_debi_write statement (which enables
         * signals to be passed through the gate array) would execute before
         * the trailing edge of WS1/WS3 (which turns off the signals), thus
         * causing the signals to be inactive during the DAC write.
         */
        s626_debi_write(dev, S626_LP_DACPOL, devpriv->dacpol);

        /* TRANSFER OUTPUT DWORD VALUE INTO A2'S OUTPUT FIFO ---------------- */

        /* Copy DAC setpoint value to DAC's output DMA buffer. */
        /* writel(val, devpriv->mmio + (uint32_t)devpriv->dac_wbuf); */
        *devpriv->dac_wbuf = val;

        /*
         * Enable the output DMA transfer. This will cause the DMAC to copy
         * the DAC's data value to A2's output FIFO. The DMA transfer will
         * then immediately terminate because the protection address is
         * reached upon transfer of the first DWORD value.
         */
        s626_mc_enable(dev, S626_MC1_A2OUT, S626_P_MC1);

        /* While the DMA transfer is executing ... */

        /*
         * Reset Audio2 output FIFO's underflow flag (along with any
         * other FIFO underflow/overflow flags). When set, this flag
         * will indicate that we have emerged from slot 0.
         */
        writel(S626_ISR_AFOU, devpriv->mmio + S626_P_ISR);

        /*
         * Wait for the DMA transfer to finish so that there will be data
         * available in the FIFO when time slot 1 tries to transfer a DWORD
         * from the FIFO to the output buffer register.  We test for DMA
         * Done by polling the DMAC enable flag; this flag is automatically
         * cleared when the transfer has finished.
         */
        while (readl(devpriv->mmio + S626_P_MC1) & S626_MC1_A2OUT)
                ;

        /* START THE OUTPUT STREAM TO THE TARGET DAC -------------------- */

        /*
         * FIFO data is now available, so we enable execution of time slots
         * 1 and higher by clearing the EOS flag in slot 0.  Note that SD3
         * will be shifted in and stored in FB_BUFFER2 for end-of-slot-list
         * detection.
         */
        writel(S626_XSD2 | S626_RSD3 | S626_SIB_A2,
               devpriv->mmio + S626_VECTPORT(0));

        /*
         * Wait for slot 1 to execute to ensure that the Packet will be
         * transmitted.  This is detected by polling the Audio2 output FIFO
         * underflow flag, which will be set when slot 1 execution has
         * finished transferring the DAC's data DWORD from the output FIFO
         * to the output buffer register.
         */
        while (!(readl(devpriv->mmio + S626_P_SSR) & S626_SSR_AF2_OUT))
                ;

        /*
         * Set up to trap execution at slot 0 when the TSL sequencer cycles
         * back to slot 0 after executing the EOS in slot 5.  Also,
         * simultaneously shift out and in the 0x00 that is ALWAYS the value
         * stored in the last byte to be shifted out of the FIFO's DWORD
         * buffer register.
         */
        writel(S626_XSD2 | S626_XFIFO_2 | S626_RSD2 | S626_SIB_A2 | S626_EOS,
               devpriv->mmio + S626_VECTPORT(0));

        /* WAIT FOR THE TRANSACTION TO FINISH ----------------------- */

        /*
         * Wait for the TSL to finish executing all time slots before
         * exiting this function.  We must do this so that the next DAC
         * write doesn't start, thereby enabling clock/chip select signals:
         *
         * 1. Before the TSL sequence cycles back to slot 0, which disables
         *    the clock/cs signal gating and traps slot // list execution.
         *    we have not yet finished slot 5 then the clock/cs signals are
         *    still gated and we have not finished transmitting the stream.
         *
         * 2. While slots 2-5 are executing due to a late slot 0 trap.  In
         *    this case, the slot sequence is currently repeating, but with
         *    clock/cs signals disabled.  We must wait for slot 0 to trap
         *    execution before setting up the next DAC setpoint DMA transfer
         *    and enabling the clock/cs signals.  To detect the end of slot 5,
         *    we test for the FB_BUFFER2 MSB contents to be equal to 0xFF.  If
         *    the TSL has not yet finished executing slot 5 ...
         */
        if (readl(devpriv->mmio + S626_P_FB_BUFFER2) & 0xff000000) {
                /*
                 * The trap was set on time and we are still executing somewhere
                 * in slots 2-5, so we now wait for slot 0 to execute and trap
                 * TSL execution.  This is detected when FB_BUFFER2 MSB changes
                 * from 0xFF to 0x00, which slot 0 causes to happen by shifting
                 * out/in on SD2 the 0x00 that is always referenced by slot 5.
                 */
                while (readl(devpriv->mmio + S626_P_FB_BUFFER2) & 0xff000000)
                        ;
        }
        /*
         * Either (1) we were too late setting the slot 0 trap; the TSL
         * sequencer restarted slot 0 before we could set the EOS trap flag,
         * or (2) we were not late and execution is now trapped at slot 0.
         * In either case, we must now change slot 0 so that it will store
         * value 0xFF (instead of 0x00) to FB_BUFFER2 next time it executes.
         * In order to do this, we reprogram slot 0 so that it will shift in
         * SD3, which is driven only by a pull-up resistor.
         */
        writel(S626_RSD3 | S626_SIB_A2 | S626_EOS,
               devpriv->mmio + S626_VECTPORT(0));

        /*
         * Wait for slot 0 to execute, at which time the TSL is setup for
         * the next DAC write.  This is detected when FB_BUFFER2 MSB changes
         * from 0x00 to 0xFF.
         */
        while (!(readl(devpriv->mmio + S626_P_FB_BUFFER2) & 0xff000000))
                ;
}

/*
 * Private helper function: Write setpoint to an application DAC channel.
 */
static void s626_set_dac(struct comedi_device *dev, uint16_t chan,
                         int16_t dacdata)
{
        struct s626_private *devpriv = dev->private;
        uint16_t signmask;
        uint32_t ws_image;
        uint32_t val;

        /*
         * Adjust DAC data polarity and set up Polarity Control Register image.
         */
        signmask = 1 << chan;
        if (dacdata < 0) {
                dacdata = -dacdata;
                devpriv->dacpol |= signmask;
        } else {
                devpriv->dacpol &= ~signmask;
        }

        /* Limit DAC setpoint value to valid range. */
        if ((uint16_t)dacdata > 0x1FFF)
                dacdata = 0x1FFF;

        /*
         * Set up TSL2 records (aka "vectors") for DAC update.  Vectors V2
         * and V3 transmit the setpoint to the target DAC.  V4 and V5 send
         * data to a non-existent TrimDac channel just to keep the clock
         * running after sending data to the target DAC.  This is necessary
         * to eliminate the clock glitch that would otherwise occur at the
         * end of the target DAC's serial data stream.  When the sequence
         * restarts at V0 (after executing V5), the gate array automatically
         * disables gating for the DAC clock and all DAC chip selects.
         */

        /* Choose DAC chip select to be asserted */
        ws_image = (chan & 2) ? S626_WS1 : S626_WS2;
        /* Slot 2: Transmit high data byte to target DAC */
        writel(S626_XSD2 | S626_XFIFO_1 | ws_image,
               devpriv->mmio + S626_VECTPORT(2));
        /* Slot 3: Transmit low data byte to target DAC */
        writel(S626_XSD2 | S626_XFIFO_0 | ws_image,
               devpriv->mmio + S626_VECTPORT(3));
        /* Slot 4: Transmit to non-existent TrimDac channel to keep clock */
        writel(S626_XSD2 | S626_XFIFO_3 | S626_WS3,
               devpriv->mmio + S626_VECTPORT(4));
        /* Slot 5: running after writing target DAC's low data byte */
        writel(S626_XSD2 | S626_XFIFO_2 | S626_WS3 | S626_EOS,
               devpriv->mmio + S626_VECTPORT(5));

        /*
         * Construct and transmit target DAC's serial packet:
         * (A10D DDDD), (DDDD DDDD), (0x0F), (0x00) where A is chan<0>,
         * and D<12:0> is the DAC setpoint.  Append a WORD value (that writes
         * to a  non-existent TrimDac channel) that serves to keep the clock
         * running after the packet has been sent to the target DAC.
         */
        val = 0x0F000000;       /* Continue clock after target DAC data
                                 * (write to non-existent trimdac). */
        val |= 0x00004000;      /* Address the two main dual-DAC devices
                                 * (TSL's chip select enables target device). */
        val |= ((uint32_t)(chan & 1) << 15);    /* Address the DAC channel
                                                 * within the device. */
        val |= (uint32_t)dacdata;       /* Include DAC setpoint data. */
        s626_send_dac(dev, val);
}

static void s626_write_trim_dac(struct comedi_device *dev, uint8_t logical_chan,
                                uint8_t dac_data)
{
        struct s626_private *devpriv = dev->private;
        uint32_t chan;

        /*
         * Save the new setpoint in case the application needs to read it back
         * later.
         */
        devpriv->trim_setpoint[logical_chan] = (uint8_t)dac_data;

        /* Map logical channel number to physical channel number. */
        chan = s626_trimchan[logical_chan];

        /*
         * Set up TSL2 records for TrimDac write operation.  All slots shift
         * 0xFF in from pulled-up SD3 so that the end of the slot sequence
         * can be detected.
         */

        /* Slot 2: Send high uint8_t to target TrimDac */
        writel(S626_XSD2 | S626_XFIFO_1 | S626_WS3,
               devpriv->mmio + S626_VECTPORT(2));
        /* Slot 3: Send low uint8_t to target TrimDac */
        writel(S626_XSD2 | S626_XFIFO_0 | S626_WS3,
               devpriv->mmio + S626_VECTPORT(3));
        /* Slot 4: Send NOP high uint8_t to DAC0 to keep clock running */
        writel(S626_XSD2 | S626_XFIFO_3 | S626_WS1,
               devpriv->mmio + S626_VECTPORT(4));
        /* Slot 5: Send NOP low  uint8_t to DAC0 */
        writel(S626_XSD2 | S626_XFIFO_2 | S626_WS1 | S626_EOS,
               devpriv->mmio + S626_VECTPORT(5));

        /*
         * Construct and transmit target DAC's serial packet:
         * (0000 AAAA), (DDDD DDDD), (0x00), (0x00) where A<3:0> is the
         * DAC channel's address, and D<7:0> is the DAC setpoint.  Append a
         * WORD value (that writes a channel 0 NOP command to a non-existent
         * main DAC channel) that serves to keep the clock running after the
         * packet has been sent to the target DAC.
         */

        /*
         * Address the DAC channel within the trimdac device.
         * Include DAC setpoint data.
         */
        s626_send_dac(dev, (chan << 8) | dac_data);
}

static void s626_load_trim_dacs(struct comedi_device *dev)
{
        uint8_t i;

        /* Copy TrimDac setpoint values from EEPROM to TrimDacs. */
        for (i = 0; i < ARRAY_SIZE(s626_trimchan); i++)
                s626_write_trim_dac(dev, i,
                                    s626_i2c_read(dev, s626_trimadrs[i]));
}

/* ******  COUNTER FUNCTIONS  ******* */

/*
 * All counter functions address a specific counter by means of the
 * "Counter" argument, which is a logical counter number.  The Counter
 * argument may have any of the following legal values: 0=0A, 1=1A,
 * 2=2A, 3=0B, 4=1B, 5=2B.
 */

/*
 * Read a counter's output latch.
 */
static uint32_t s626_read_latch(struct comedi_device *dev,
                                const struct s626_enc_info *k)
{
        uint32_t value;

        /* Latch counts and fetch LSW of latched counts value. */
        value = s626_debi_read(dev, k->my_latch_lsw);

        /* Fetch MSW of latched counts and combine with LSW. */
        value |= ((uint32_t)s626_debi_read(dev, k->my_latch_lsw + 2) << 16);

        /* Return latched counts. */
        return value;
}

/*
 * Return/set a counter pair's latch trigger source.  0: On read
 * access, 1: A index latches A, 2: B index latches B, 3: A overflow
 * latches B.
 */
static void s626_set_latch_source(struct comedi_device *dev,
                                  const struct s626_enc_info *k, uint16_t value)
{
        s626_debi_replace(dev, k->my_crb,
                          ~(S626_CRBMSK_INTCTRL | S626_CRBMSK_LATCHSRC),
                          S626_SET_CRB_LATCHSRC(value));
}

/*
 * Write value into counter preload register.
 */
static void s626_preload(struct comedi_device *dev,
                         const struct s626_enc_info *k, uint32_t value)
{
        s626_debi_write(dev, k->my_latch_lsw, value);
        s626_debi_write(dev, k->my_latch_lsw + 2, value >> 16);
}

/* ******  PRIVATE COUNTER FUNCTIONS ****** */

/*
 * Reset a counter's index and overflow event capture flags.
 */
static void s626_reset_cap_flags_a(struct comedi_device *dev,
                                   const struct s626_enc_info *k)
{
        s626_debi_replace(dev, k->my_crb, ~S626_CRBMSK_INTCTRL,
                          (S626_SET_CRB_INTRESETCMD(1) |
                           S626_SET_CRB_INTRESET_A(1)));
}

static void s626_reset_cap_flags_b(struct comedi_device *dev,
                                   const struct s626_enc_info *k)
{
        s626_debi_replace(dev, k->my_crb, ~S626_CRBMSK_INTCTRL,
                          (S626_SET_CRB_INTRESETCMD(1) |
                           S626_SET_CRB_INTRESET_B(1)));
}

/*
 * Return counter setup in a format (COUNTER_SETUP) that is consistent
 * for both A and B counters.
 */
static uint16_t s626_get_mode_a(struct comedi_device *dev,
                                const struct s626_enc_info *k)
{
        uint16_t cra;
        uint16_t crb;
        uint16_t setup;
        unsigned cntsrc, clkmult, clkpol, encmode;

        /* Fetch CRA and CRB register images. */
        cra = s626_debi_read(dev, k->my_cra);
        crb = s626_debi_read(dev, k->my_crb);

        /*
         * Populate the standardized counter setup bit fields.
         */
        setup =
                /* LoadSrc  = LoadSrcA. */
                S626_SET_STD_LOADSRC(S626_GET_CRA_LOADSRC_A(cra)) |
                /* LatchSrc = LatchSrcA. */
                S626_SET_STD_LATCHSRC(S626_GET_CRB_LATCHSRC(crb)) |
                /* IntSrc   = IntSrcA. */
                S626_SET_STD_INTSRC(S626_GET_CRA_INTSRC_A(cra)) |
                /* IndxSrc  = IndxSrcA. */
                S626_SET_STD_INDXSRC(S626_GET_CRA_INDXSRC_A(cra)) |
                /* IndxPol  = IndxPolA. */
                S626_SET_STD_INDXPOL(S626_GET_CRA_INDXPOL_A(cra)) |
                /* ClkEnab  = ClkEnabA. */
                S626_SET_STD_CLKENAB(S626_GET_CRB_CLKENAB_A(crb));

        /* Adjust mode-dependent parameters. */
        cntsrc = S626_GET_CRA_CNTSRC_A(cra);
        if (cntsrc & S626_CNTSRC_SYSCLK) {
                /* Timer mode (CntSrcA<1> == 1): */
                encmode = S626_ENCMODE_TIMER;
                /* Set ClkPol to indicate count direction (CntSrcA<0>). */
                clkpol = cntsrc & 1;
                /* ClkMult must be 1x in Timer mode. */
                clkmult = S626_CLKMULT_1X;
        } else {
                /* Counter mode (CntSrcA<1> == 0): */
                encmode = S626_ENCMODE_COUNTER;
                /* Pass through ClkPol. */
                clkpol = S626_GET_CRA_CLKPOL_A(cra);
                /* Force ClkMult to 1x if not legal, else pass through. */
                clkmult = S626_GET_CRA_CLKMULT_A(cra);
                if (clkmult == S626_CLKMULT_SPECIAL)
                        clkmult = S626_CLKMULT_1X;
        }
        setup |= S626_SET_STD_ENCMODE(encmode) | S626_SET_STD_CLKMULT(clkmult) |
                 S626_SET_STD_CLKPOL(clkpol);

        /* Return adjusted counter setup. */
        return setup;
}

static uint16_t s626_get_mode_b(struct comedi_device *dev,
                                const struct s626_enc_info *k)
{
        uint16_t cra;
        uint16_t crb;
        uint16_t setup;
        unsigned cntsrc, clkmult, clkpol, encmode;

        /* Fetch CRA and CRB register images. */
        cra = s626_debi_read(dev, k->my_cra);
        crb = s626_debi_read(dev, k->my_crb);

        /*
         * Populate the standardized counter setup bit fields.
         */
        setup =
                /* IntSrc   = IntSrcB. */
                S626_SET_STD_INTSRC(S626_GET_CRB_INTSRC_B(crb)) |
                /* LatchSrc = LatchSrcB. */
                S626_SET_STD_LATCHSRC(S626_GET_CRB_LATCHSRC(crb)) |
                /* LoadSrc  = LoadSrcB. */
                S626_SET_STD_LOADSRC(S626_GET_CRB_LOADSRC_B(crb)) |
                /* IndxPol  = IndxPolB. */
                S626_SET_STD_INDXPOL(S626_GET_CRB_INDXPOL_B(crb)) |
                /* ClkEnab  = ClkEnabB. */
                S626_SET_STD_CLKENAB(S626_GET_CRB_CLKENAB_B(crb)) |
                /* IndxSrc  = IndxSrcB. */
                S626_SET_STD_INDXSRC(S626_GET_CRA_INDXSRC_B(cra));

        /* Adjust mode-dependent parameters. */
        cntsrc = S626_GET_CRA_CNTSRC_B(cra);
        clkmult = S626_GET_CRB_CLKMULT_B(crb);
        if (clkmult == S626_CLKMULT_SPECIAL) {
                /* Extender mode (ClkMultB == S626_CLKMULT_SPECIAL): */
                encmode = S626_ENCMODE_EXTENDER;
                /* Indicate multiplier is 1x. */
                clkmult = S626_CLKMULT_1X;
                /* Set ClkPol equal to Timer count direction (CntSrcB<0>). */
                clkpol = cntsrc & 1;
        } else if (cntsrc & S626_CNTSRC_SYSCLK) {
                /* Timer mode (CntSrcB<1> == 1): */
                encmode = S626_ENCMODE_TIMER;
                /* Indicate multiplier is 1x. */
                clkmult = S626_CLKMULT_1X;
                /* Set ClkPol equal to Timer count direction (CntSrcB<0>). */
                clkpol = cntsrc & 1;
        } else {
                /* If Counter mode (CntSrcB<1> == 0): */
                encmode = S626_ENCMODE_COUNTER;
                /* Clock multiplier is passed through. */
                /* Clock polarity is passed through. */
                clkpol = S626_GET_CRB_CLKPOL_B(crb);
        }
        setup |= S626_SET_STD_ENCMODE(encmode) | S626_SET_STD_CLKMULT(clkmult) |
                 S626_SET_STD_CLKPOL(clkpol);

        /* Return adjusted counter setup. */
        return setup;
}

/*
 * Set the operating mode for the specified counter.  The setup
 * parameter is treated as a COUNTER_SETUP data type.  The following
 * parameters are programmable (all other parms are ignored): ClkMult,
 * ClkPol, ClkEnab, IndexSrc, IndexPol, LoadSrc.
 */
static void s626_set_mode_a(struct comedi_device *dev,
                            const struct s626_enc_info *k, uint16_t setup,
                            uint16_t disable_int_src)
{
        struct s626_private *devpriv = dev->private;
        uint16_t cra;
        uint16_t crb;
        unsigned cntsrc, clkmult, clkpol;

        /* Initialize CRA and CRB images. */
        /* Preload trigger is passed through. */
        cra = S626_SET_CRA_LOADSRC_A(S626_GET_STD_LOADSRC(setup));
        /* IndexSrc is passed through. */
        cra |= S626_SET_CRA_INDXSRC_A(S626_GET_STD_INDXSRC(setup));

        /* Reset any pending CounterA event captures. */
        crb = S626_SET_CRB_INTRESETCMD(1) | S626_SET_CRB_INTRESET_A(1);
        /* Clock enable is passed through. */
        crb |= S626_SET_CRB_CLKENAB_A(S626_GET_STD_CLKENAB(setup));

        /* Force IntSrc to Disabled if disable_int_src is asserted. */
        if (!disable_int_src)
                cra |= S626_SET_CRA_INTSRC_A(S626_GET_STD_INTSRC(setup));

        /* Populate all mode-dependent attributes of CRA & CRB images. */
        clkpol = S626_GET_STD_CLKPOL(setup);
        switch (S626_GET_STD_ENCMODE(setup)) {
        case S626_ENCMODE_EXTENDER: /* Extender Mode: */
                /* Force to Timer mode (Extender valid only for B counters). */
                /* Fall through to case S626_ENCMODE_TIMER: */
        case S626_ENCMODE_TIMER:        /* Timer Mode: */
                /* CntSrcA<1> selects system clock */
                cntsrc = S626_CNTSRC_SYSCLK;
                /* Count direction (CntSrcA<0>) obtained from ClkPol. */
                cntsrc |= clkpol;
                /* ClkPolA behaves as always-on clock enable. */
                clkpol = 1;
                /* ClkMult must be 1x. */
                clkmult = S626_CLKMULT_1X;
                break;
        default:                /* Counter Mode: */
                /* Select ENC_C and ENC_D as clock/direction inputs. */
                cntsrc = S626_CNTSRC_ENCODER;
                /* Clock polarity is passed through. */
                /* Force multiplier to x1 if not legal, else pass through. */
                clkmult = S626_GET_STD_CLKMULT(setup);
                if (clkmult == S626_CLKMULT_SPECIAL)
                        clkmult = S626_CLKMULT_1X;
                break;
        }
        cra |= S626_SET_CRA_CNTSRC_A(cntsrc) | S626_SET_CRA_CLKPOL_A(clkpol) |
               S626_SET_CRA_CLKMULT_A(clkmult);

        /*
         * Force positive index polarity if IndxSrc is software-driven only,
         * otherwise pass it through.
         */
        if (S626_GET_STD_INDXSRC(setup) != S626_INDXSRC_SOFT)
                cra |= S626_SET_CRA_INDXPOL_A(S626_GET_STD_INDXPOL(setup));

        /*
         * If IntSrc has been forced to Disabled, update the MISC2 interrupt
         * enable mask to indicate the counter interrupt is disabled.
         */
        if (disable_int_src)
                devpriv->counter_int_enabs &= ~k->my_event_bits[3];

        /*
         * While retaining CounterB and LatchSrc configurations, program the
         * new counter operating mode.
         */
        s626_debi_replace(dev, k->my_cra,
                          S626_CRAMSK_INDXSRC_B | S626_CRAMSK_CNTSRC_B, cra);
        s626_debi_replace(dev, k->my_crb,
                          ~(S626_CRBMSK_INTCTRL | S626_CRBMSK_CLKENAB_A), crb);
}

static void s626_set_mode_b(struct comedi_device *dev,
                            const struct s626_enc_info *k, uint16_t setup,
                            uint16_t disable_int_src)
{
        struct s626_private *devpriv = dev->private;
        uint16_t cra;
        uint16_t crb;
        unsigned cntsrc, clkmult, clkpol;

        /* Initialize CRA and CRB images. */
        /* IndexSrc is passed through. */
        cra = S626_SET_CRA_INDXSRC_B(S626_GET_STD_INDXSRC(setup));

        /* Reset event captures and disable interrupts. */
        crb = S626_SET_CRB_INTRESETCMD(1) | S626_SET_CRB_INTRESET_B(1);
        /* Clock enable is passed through. */
        crb |= S626_SET_CRB_CLKENAB_B(S626_GET_STD_CLKENAB(setup));
        /* Preload trigger source is passed through. */
        crb |= S626_SET_CRB_LOADSRC_B(S626_GET_STD_LOADSRC(setup));

        /* Force IntSrc to Disabled if disable_int_src is asserted. */
        if (!disable_int_src)
                crb |= S626_SET_CRB_INTSRC_B(S626_GET_STD_INTSRC(setup));

        /* Populate all mode-dependent attributes of CRA & CRB images. */
        clkpol = S626_GET_STD_CLKPOL(setup);
        switch (S626_GET_STD_ENCMODE(setup)) {
        case S626_ENCMODE_TIMER:        /* Timer Mode: */
                /* CntSrcB<1> selects system clock */
                cntsrc = S626_CNTSRC_SYSCLK;
                /* with direction (CntSrcB<0>) obtained from ClkPol. */
                cntsrc |= clkpol;
                /* ClkPolB behaves as always-on clock enable. */
                clkpol = 1;
                /* ClkMultB must be 1x. */
                clkmult = S626_CLKMULT_1X;
                break;
        case S626_ENCMODE_EXTENDER:     /* Extender Mode: */
                /* CntSrcB source is OverflowA (same as "timer") */
                cntsrc = S626_CNTSRC_SYSCLK;
                /* with direction obtained from ClkPol. */
                cntsrc |= clkpol;
                /* ClkPolB controls IndexB -- always set to active. */
                clkpol = 1;
                /* ClkMultB selects OverflowA as the clock source. */
                clkmult = S626_CLKMULT_SPECIAL;
                break;
        default:                /* Counter Mode: */
                /* Select ENC_C and ENC_D as clock/direction inputs. */
                cntsrc = S626_CNTSRC_ENCODER;
                /* ClkPol is passed through. */
                /* Force ClkMult to x1 if not legal, otherwise pass through. */
                clkmult = S626_GET_STD_CLKMULT(setup);
                if (clkmult == S626_CLKMULT_SPECIAL)
                        clkmult = S626_CLKMULT_1X;
                break;
        }
        cra |= S626_SET_CRA_CNTSRC_B(cntsrc);
        crb |= S626_SET_CRB_CLKPOL_B(clkpol) | S626_SET_CRB_CLKMULT_B(clkmult);

        /*
         * Force positive index polarity if IndxSrc is software-driven only,
         * otherwise pass it through.
         */
        if (S626_GET_STD_INDXSRC(setup) != S626_INDXSRC_SOFT)
                crb |= S626_SET_CRB_INDXPOL_B(S626_GET_STD_INDXPOL(setup));

        /*
         * If IntSrc has been forced to Disabled, update the MISC2 interrupt
         * enable mask to indicate the counter interrupt is disabled.
         */
        if (disable_int_src)
                devpriv->counter_int_enabs &= ~k->my_event_bits[3];

        /*
         * While retaining CounterA and LatchSrc configurations, program the
         * new counter operating mode.
         */
        s626_debi_replace(dev, k->my_cra,
                          ~(S626_CRAMSK_INDXSRC_B | S626_CRAMSK_CNTSRC_B), cra);
        s626_debi_replace(dev, k->my_crb,
                          S626_CRBMSK_CLKENAB_A | S626_CRBMSK_LATCHSRC, crb);
}

/*
 * Return/set a counter's enable.  enab: 0=always enabled, 1=enabled by index.
 */
static void s626_set_enable_a(struct comedi_device *dev,
                              const struct s626_enc_info *k, uint16_t enab)
{
        s626_debi_replace(dev, k->my_crb,
                          ~(S626_CRBMSK_INTCTRL | S626_CRBMSK_CLKENAB_A),
                          S626_SET_CRB_CLKENAB_A(enab));
}

static void s626_set_enable_b(struct comedi_device *dev,
                              const struct s626_enc_info *k, uint16_t enab)
{
        s626_debi_replace(dev, k->my_crb,
                          ~(S626_CRBMSK_INTCTRL | S626_CRBMSK_CLKENAB_B),
                          S626_SET_CRB_CLKENAB_B(enab));
}

static uint16_t s626_get_enable_a(struct comedi_device *dev,
                                  const struct s626_enc_info *k)
{
        return S626_GET_CRB_CLKENAB_A(s626_debi_read(dev, k->my_crb));
}

static uint16_t s626_get_enable_b(struct comedi_device *dev,
                                  const struct s626_enc_info *k)
{
        return S626_GET_CRB_CLKENAB_B(s626_debi_read(dev, k->my_crb));
}

#ifdef unused
static uint16_t s626_get_latch_source(struct comedi_device *dev,
                                      const struct s626_enc_info *k)
{
        return S626_GET_CRB_LATCHSRC(s626_debi_read(dev, k->my_crb));
}
#endif

/*
 * Return/set the event that will trigger transfer of the preload
 * register into the counter.  0=ThisCntr_Index, 1=ThisCntr_Overflow,
 * 2=OverflowA (B counters only), 3=disabled.
 */
static void s626_set_load_trig_a(struct comedi_device *dev,
                                 const struct s626_enc_info *k, uint16_t trig)
{
        s626_debi_replace(dev, k->my_cra, ~S626_CRAMSK_LOADSRC_A,
                          S626_SET_CRA_LOADSRC_A(trig));
}

static void s626_set_load_trig_b(struct comedi_device *dev,
                                 const struct s626_enc_info *k, uint16_t trig)
{
        s626_debi_replace(dev, k->my_crb,
                          ~(S626_CRBMSK_LOADSRC_B | S626_CRBMSK_INTCTRL),
                          S626_SET_CRB_LOADSRC_B(trig));
}

static uint16_t s626_get_load_trig_a(struct comedi_device *dev,
                                     const struct s626_enc_info *k)
{
        return S626_GET_CRA_LOADSRC_A(s626_debi_read(dev, k->my_cra));
}

static uint16_t s626_get_load_trig_b(struct comedi_device *dev,
                                     const struct s626_enc_info *k)
{
        return S626_GET_CRB_LOADSRC_B(s626_debi_read(dev, k->my_crb));
}

/*
 * Return/set counter interrupt source and clear any captured
 * index/overflow events.  int_source: 0=Disabled, 1=OverflowOnly,
 * 2=IndexOnly, 3=IndexAndOverflow.
 */
static void s626_set_int_src_a(struct comedi_device *dev,
                               const struct s626_enc_info *k,
                               uint16_t int_source)
{
        struct s626_private *devpriv = dev->private;

        /* Reset any pending counter overflow or index captures. */
        s626_debi_replace(dev, k->my_crb, ~S626_CRBMSK_INTCTRL,
                          (S626_SET_CRB_INTRESETCMD(1) |
                           S626_SET_CRB_INTRESET_A(1)));

        /* Program counter interrupt source. */
        s626_debi_replace(dev, k->my_cra, ~S626_CRAMSK_INTSRC_A,
                          S626_SET_CRA_INTSRC_A(int_source));

        /* Update MISC2 interrupt enable mask. */
        devpriv->counter_int_enabs =
            (devpriv->counter_int_enabs & ~k->my_event_bits[3]) |
            k->my_event_bits[int_source];
}

static void s626_set_int_src_b(struct comedi_device *dev,
                               const struct s626_enc_info *k,
                               uint16_t int_source)
{
        struct s626_private *devpriv = dev->private;
        uint16_t crb;

        /* Cache writeable CRB register image. */
        crb = s626_debi_read(dev, k->my_crb) & ~S626_CRBMSK_INTCTRL;

        /* Reset any pending counter overflow or index captures. */
        s626_debi_write(dev, k->my_crb, (crb | S626_SET_CRB_INTRESETCMD(1) |
                                         S626_SET_CRB_INTRESET_B(1)));

        /* Program counter interrupt source. */
        s626_debi_write(dev, k->my_crb, ((crb & ~S626_CRBMSK_INTSRC_B) |
                                         S626_SET_CRB_INTSRC_B(int_source)));

        /* Update MISC2 interrupt enable mask. */
        devpriv->counter_int_enabs =
                (devpriv->counter_int_enabs & ~k->my_event_bits[3]) |
                k->my_event_bits[int_source];
}

static uint16_t s626_get_int_src_a(struct comedi_device *dev,
                                   const struct s626_enc_info *k)
{
        return S626_GET_CRA_INTSRC_A(s626_debi_read(dev, k->my_cra));
}

static uint16_t s626_get_int_src_b(struct comedi_device *dev,
                                   const struct s626_enc_info *k)
{
        return S626_GET_CRB_INTSRC_B(s626_debi_read(dev, k->my_crb));
}

#ifdef unused
/*
 * Return/set the clock multiplier.
 */
static void s626_set_clk_mult(struct comedi_device *dev,
                              const struct s626_enc_info *k, uint16_t value)
{
        k->set_mode(dev, k, ((k->get_mode(dev, k) & ~S626_STDMSK_CLKMULT) |
                             S626_SET_STD_CLKMULT(value)), false);
}

static uint16_t s626_get_clk_mult(struct comedi_device *dev,
                                  const struct s626_enc_info *k)
{
        return S626_GET_STD_CLKMULT(k->get_mode(dev, k));
}

/*
 * Return/set the clock polarity.
 */
static void s626_set_clk_pol(struct comedi_device *dev,
                             const struct s626_enc_info *k, uint16_t value)
{
        k->set_mode(dev, k, ((k->get_mode(dev, k) & ~S626_STDMSK_CLKPOL) |
                             S626_SET_STD_CLKPOL(value)), false);
}

static uint16_t s626_get_clk_pol(struct comedi_device *dev,
                                 const struct s626_enc_info *k)
{
        return S626_GET_STD_CLKPOL(k->get_mode(dev, k));
}

/*
 * Return/set the encoder mode.
 */
static void s626_set_enc_mode(struct comedi_device *dev,
                              const struct s626_enc_info *k, uint16_t value)
{
        k->set_mode(dev, k, ((k->get_mode(dev, k) & ~S626_STDMSK_ENCMODE) |
                             S626_SET_STD_ENCMODE(value)), false);
}

static uint16_t s626_get_enc_mode(struct comedi_device *dev,
                                  const struct s626_enc_info *k)
{
        return S626_GET_STD_ENCMODE(k->get_mode(dev, k));
}

/*
 * Return/set the index polarity.
 */
static void s626_set_index_pol(struct comedi_device *dev,
                               const struct s626_enc_info *k, uint16_t value)
{
        k->set_mode(dev, k, ((k->get_mode(dev, k) & ~S626_STDMSK_INDXPOL) |
                             S626_SET_STD_INDXPOL(value != 0)), false);
}

static uint16_t s626_get_index_pol(struct comedi_device *dev,
                                   const struct s626_enc_info *k)
{
        return S626_GET_STD_INDXPOL(k->get_mode(dev, k));
}

/*
 * Return/set the index source.
 */
static void s626_set_index_src(struct comedi_device *dev,
                               const struct s626_enc_info *k, uint16_t value)
{
        k->set_mode(dev, k, ((k->get_mode(dev, k) & ~S626_STDMSK_INDXSRC) |
                             S626_SET_STD_INDXSRC(value != 0)), false);
}

static uint16_t s626_get_index_src(struct comedi_device *dev,
                                   const struct s626_enc_info *k)
{
        return S626_GET_STD_INDXSRC(k->get_mode(dev, k));
}
#endif

/*
 * Generate an index pulse.
 */
static void s626_pulse_index_a(struct comedi_device *dev,
                               const struct s626_enc_info *k)
{
        uint16_t cra;

        cra = s626_debi_read(dev, k->my_cra);
        /* Pulse index. */
        s626_debi_write(dev, k->my_cra, (cra ^ S626_CRAMSK_INDXPOL_A));
        s626_debi_write(dev, k->my_cra, cra);
}

static void s626_pulse_index_b(struct comedi_device *dev,
                               const struct s626_enc_info *k)
{
        uint16_t crb;

        crb = s626_debi_read(dev, k->my_crb) & ~S626_CRBMSK_INTCTRL;
        /* Pulse index. */
        s626_debi_write(dev, k->my_crb, (crb ^ S626_CRBMSK_INDXPOL_B));
        s626_debi_write(dev, k->my_crb, crb);
}

static const struct s626_enc_info s626_enc_chan_info[] = {
        {
                .get_enable             = s626_get_enable_a,
                .get_int_src            = s626_get_int_src_a,
                .get_load_trig          = s626_get_load_trig_a,
                .get_mode               = s626_get_mode_a,
                .pulse_index            = s626_pulse_index_a,
                .set_enable             = s626_set_enable_a,
                .set_int_src            = s626_set_int_src_a,
                .set_load_trig          = s626_set_load_trig_a,
                .set_mode               = s626_set_mode_a,
                .reset_cap_flags        = s626_reset_cap_flags_a,
                .my_cra                 = S626_LP_CR0A,
                .my_crb                 = S626_LP_CR0B,
                .my_latch_lsw           = S626_LP_CNTR0ALSW,
                .my_event_bits          = S626_EVBITS(0),
        }, {
                .get_enable             = s626_get_enable_a,
                .get_int_src            = s626_get_int_src_a,
                .get_load_trig          = s626_get_load_trig_a,
                .get_mode               = s626_get_mode_a,
                .pulse_index            = s626_pulse_index_a,
                .set_enable             = s626_set_enable_a,
                .set_int_src            = s626_set_int_src_a,
                .set_load_trig          = s626_set_load_trig_a,
                .set_mode               = s626_set_mode_a,
                .reset_cap_flags        = s626_reset_cap_flags_a,
                .my_cra                 = S626_LP_CR1A,
                .my_crb                 = S626_LP_CR1B,
                .my_latch_lsw           = S626_LP_CNTR1ALSW,
                .my_event_bits          = S626_EVBITS(1),
        }, {
                .get_enable             = s626_get_enable_a,
                .get_int_src            = s626_get_int_src_a,
                .get_load_trig          = s626_get_load_trig_a,
                .get_mode               = s626_get_mode_a,
                .pulse_index            = s626_pulse_index_a,
                .set_enable             = s626_set_enable_a,
                .set_int_src            = s626_set_int_src_a,
                .set_load_trig          = s626_set_load_trig_a,
                .set_mode               = s626_set_mode_a,
                .reset_cap_flags        = s626_reset_cap_flags_a,
                .my_cra                 = S626_LP_CR2A,
                .my_crb                 = S626_LP_CR2B,
                .my_latch_lsw           = S626_LP_CNTR2ALSW,
                .my_event_bits          = S626_EVBITS(2),
        }, {
                .get_enable             = s626_get_enable_b,
                .get_int_src            = s626_get_int_src_b,
                .get_load_trig          = s626_get_load_trig_b,
                .get_mode               = s626_get_mode_b,
                .pulse_index            = s626_pulse_index_b,
                .set_enable             = s626_set_enable_b,
                .set_int_src            = s626_set_int_src_b,
                .set_load_trig          = s626_set_load_trig_b,
                .set_mode               = s626_set_mode_b,
                .reset_cap_flags        = s626_reset_cap_flags_b,
                .my_cra                 = S626_LP_CR0A,
                .my_crb                 = S626_LP_CR0B,
                .my_latch_lsw           = S626_LP_CNTR0BLSW,
                .my_event_bits          = S626_EVBITS(3),
        }, {
                .get_enable             = s626_get_enable_b,
                .get_int_src            = s626_get_int_src_b,
                .get_load_trig          = s626_get_load_trig_b,
                .get_mode               = s626_get_mode_b,
                .pulse_index            = s626_pulse_index_b,
                .set_enable             = s626_set_enable_b,
                .set_int_src            = s626_set_int_src_b,
                .set_load_trig          = s626_set_load_trig_b,
                .set_mode               = s626_set_mode_b,
                .reset_cap_flags        = s626_reset_cap_flags_b,
                .my_cra                 = S626_LP_CR1A,
                .my_crb                 = S626_LP_CR1B,
                .my_latch_lsw           = S626_LP_CNTR1BLSW,
                .my_event_bits          = S626_EVBITS(4),
        }, {
                .get_enable             = s626_get_enable_b,
                .get_int_src            = s626_get_int_src_b,
                .get_load_trig          = s626_get_load_trig_b,
                .get_mode               = s626_get_mode_b,
                .pulse_index            = s626_pulse_index_b,
                .set_enable             = s626_set_enable_b,
                .set_int_src            = s626_set_int_src_b,
                .set_load_trig          = s626_set_load_trig_b,
                .set_mode               = s626_set_mode_b,
                .reset_cap_flags        = s626_reset_cap_flags_b,
                .my_cra                 = S626_LP_CR2A,
                .my_crb                 = S626_LP_CR2B,
                .my_latch_lsw           = S626_LP_CNTR2BLSW,
                .my_event_bits          = S626_EVBITS(5),
        },
};

static unsigned int s626_ai_reg_to_uint(unsigned int data)
{
        return ((data >> 18) & 0x3fff) ^ 0x2000;
}

static int s626_dio_set_irq(struct comedi_device *dev, unsigned int chan)
{
        unsigned int group = chan / 16;
        unsigned int mask = 1 << (chan - (16 * group));
        unsigned int status;

        /* set channel to capture positive edge */
        status = s626_debi_read(dev, S626_LP_RDEDGSEL(group));
        s626_debi_write(dev, S626_LP_WREDGSEL(group), mask | status);

        /* enable interrupt on selected channel */
        status = s626_debi_read(dev, S626_LP_RDINTSEL(group));
        s626_debi_write(dev, S626_LP_WRINTSEL(group), mask | status);

        /* enable edge capture write command */
        s626_debi_write(dev, S626_LP_MISC1, S626_MISC1_EDCAP);

        /* enable edge capture on selected channel */
        status = s626_debi_read(dev, S626_LP_RDCAPSEL(group));
        s626_debi_write(dev, S626_LP_WRCAPSEL(group), mask | status);

        return 0;
}

static int s626_dio_reset_irq(struct comedi_device *dev, unsigned int group,
                              unsigned int mask)
{
        /* disable edge capture write command */
        s626_debi_write(dev, S626_LP_MISC1, S626_MISC1_NOEDCAP);

        /* enable edge capture on selected channel */
        s626_debi_write(dev, S626_LP_WRCAPSEL(group), mask);

        return 0;
}

static int s626_dio_clear_irq(struct comedi_device *dev)
{
        unsigned int group;

        /* disable edge capture write command */
        s626_debi_write(dev, S626_LP_MISC1, S626_MISC1_NOEDCAP);

        /* clear all dio pending events and interrupt */
        for (group = 0; group < S626_DIO_BANKS; group++)
                s626_debi_write(dev, S626_LP_WRCAPSEL(group), 0xffff);

        return 0;
}

static void s626_handle_dio_interrupt(struct comedi_device *dev,
                                      uint16_t irqbit, uint8_t group)
{
        struct s626_private *devpriv = dev->private;
        struct comedi_subdevice *s = dev->read_subdev;
        struct comedi_cmd *cmd = &s->async->cmd;

        s626_dio_reset_irq(dev, group, irqbit);

        if (devpriv->ai_cmd_running) {
                /* check if interrupt is an ai acquisition start trigger */
                if ((irqbit >> (cmd->start_arg - (16 * group))) == 1 &&
                    cmd->start_src == TRIG_EXT) {
                        /* Start executing the RPS program */
                        s626_mc_enable(dev, S626_MC1_ERPS1, S626_P_MC1);

                        if (cmd->scan_begin_src == TRIG_EXT)
                                s626_dio_set_irq(dev, cmd->scan_begin_arg);
                }
                if ((irqbit >> (cmd->scan_begin_arg - (16 * group))) == 1 &&
                    cmd->scan_begin_src == TRIG_EXT) {
                        /* Trigger ADC scan loop start */
                        s626_mc_enable(dev, S626_MC2_ADC_RPS, S626_P_MC2);

                        if (cmd->convert_src == TRIG_EXT) {
                                devpriv->ai_convert_count = cmd->chanlist_len;

                                s626_dio_set_irq(dev, cmd->convert_arg);
                        }

                        if (cmd->convert_src == TRIG_TIMER) {
                                const struct s626_enc_info *k =
                                        &s626_enc_chan_info[5];

                                devpriv->ai_convert_count = cmd->chanlist_len;
                                k->set_enable(dev, k, S626_CLKENAB_ALWAYS);
                        }
                }
                if ((irqbit >> (cmd->convert_arg - (16 * group))) == 1 &&
                    cmd->convert_src == TRIG_EXT) {
                        /* Trigger ADC scan loop start */
                        s626_mc_enable(dev, S626_MC2_ADC_RPS, S626_P_MC2);

                        devpriv->ai_convert_count--;
                        if (devpriv->ai_convert_count > 0)
                                s626_dio_set_irq(dev, cmd->convert_arg);
                }
        }
}

static void s626_check_dio_interrupts(struct comedi_device *dev)
{
        uint16_t irqbit;
        uint8_t group;

        for (group = 0; group < S626_DIO_BANKS; group++) {
                irqbit = 0;
                /* read interrupt type */
                irqbit = s626_debi_read(dev, S626_LP_RDCAPFLG(group));

                /* check if interrupt is generated from dio channels */
                if (irqbit) {
                        s626_handle_dio_interrupt(dev, irqbit, group);
                        return;
                }
        }
}

static void s626_check_counter_interrupts(struct comedi_device *dev)
{
        struct s626_private *devpriv = dev->private;
        struct comedi_subdevice *s = dev->read_subdev;
        struct comedi_async *async = s->async;
        struct comedi_cmd *cmd = &async->cmd;
        const struct s626_enc_info *k;
        uint16_t irqbit;

        /* read interrupt type */
        irqbit = s626_debi_read(dev, S626_LP_RDMISC2);

        /* check interrupt on counters */
        if (irqbit & S626_IRQ_COINT1A) {
                k = &s626_enc_chan_info[0];

                /* clear interrupt capture flag */
                k->reset_cap_flags(dev, k);
        }
        if (irqbit & S626_IRQ_COINT2A) {
                k = &s626_enc_chan_info[1];

                /* clear interrupt capture flag */
                k->reset_cap_flags(dev, k);
        }
        if (irqbit & S626_IRQ_COINT3A) {
                k = &s626_enc_chan_info[2];

                /* clear interrupt capture flag */
                k->reset_cap_flags(dev, k);
        }
        if (irqbit & S626_IRQ_COINT1B) {
                k = &s626_enc_chan_info[3];

                /* clear interrupt capture flag */
                k->reset_cap_flags(dev, k);
        }
        if (irqbit & S626_IRQ_COINT2B) {
                k = &s626_enc_chan_info[4];

                /* clear interrupt capture flag */
                k->reset_cap_flags(dev, k);

                if (devpriv->ai_convert_count > 0) {
                        devpriv->ai_convert_count--;
                        if (devpriv->ai_convert_count == 0)
                                k->set_enable(dev, k, S626_CLKENAB_INDEX);

                        if (cmd->convert_src == TRIG_TIMER) {
                                /* Trigger ADC scan loop start */
                                s626_mc_enable(dev, S626_MC2_ADC_RPS,
                                               S626_P_MC2);
                        }
                }
        }
        if (irqbit & S626_IRQ_COINT3B) {
                k = &s626_enc_chan_info[5];

                /* clear interrupt capture flag */
                k->reset_cap_flags(dev, k);

                if (cmd->scan_begin_src == TRIG_TIMER) {
                        /* Trigger ADC scan loop start */
                        s626_mc_enable(dev, S626_MC2_ADC_RPS, S626_P_MC2);
                }

                if (cmd->convert_src == TRIG_TIMER) {
                        k = &s626_enc_chan_info[4];
                        devpriv->ai_convert_count = cmd->chanlist_len;
                        k->set_enable(dev, k, S626_CLKENAB_ALWAYS);
                }
        }
}

static bool s626_handle_eos_interrupt(struct comedi_device *dev)
{
        struct s626_private *devpriv = dev->private;
        struct comedi_subdevice *s = dev->read_subdev;
        struct comedi_async *async = s->async;
        struct comedi_cmd *cmd = &async->cmd;
        /*
         * Init ptr to DMA buffer that holds new ADC data.  We skip the
         * first uint16_t in the buffer because it contains junk data
         * from the final ADC of the previous poll list scan.
         */
        uint32_t *readaddr = (uint32_t *)devpriv->ana_buf.logical_base + 1;
        bool finished = false;
        int i;

        /* get the data and hand it over to comedi */
        for (i = 0; i < cmd->chanlist_len; i++) {
                unsigned short tempdata;

                /*
                 * Convert ADC data to 16-bit integer values and copy
                 * to application buffer.
                 */
                tempdata = s626_ai_reg_to_uint(*readaddr);
                readaddr++;

                /* put data into read buffer */
                /* comedi_buf_put(async, tempdata); */
                cfc_write_to_buffer(s, tempdata);
        }

        /* end of scan occurs */
        async->events |= COMEDI_CB_EOS;

        if (!devpriv->ai_continuous)
                devpriv->ai_sample_count--;
        if (devpriv->ai_sample_count <= 0) {
                devpriv->ai_cmd_running = 0;

                /* Stop RPS program */
                s626_mc_disable(dev, S626_MC1_ERPS1, S626_P_MC1);

                /* send end of acquisition */
                async->events |= COMEDI_CB_EOA;

                /* disable master interrupt */
                finished = true;
        }

        if (devpriv->ai_cmd_running && cmd->scan_begin_src == TRIG_EXT)
                s626_dio_set_irq(dev, cmd->scan_begin_arg);

        /* tell comedi that data is there */
        comedi_event(dev, s);

        return finished;
}

static irqreturn_t s626_irq_handler(int irq, void *d)
{
        struct comedi_device *dev = d;
        struct s626_private *devpriv = dev->private;
        unsigned long flags;
        uint32_t irqtype, irqstatus;

        if (!dev->attached)
                return IRQ_NONE;
        /* lock to avoid race with comedi_poll */
        spin_lock_irqsave(&dev->spinlock, flags);

        /* save interrupt enable register state */
        irqstatus = readl(devpriv->mmio + S626_P_IER);

        /* read interrupt type */
        irqtype = readl(devpriv->mmio + S626_P_ISR);

        /* disable master interrupt */
        writel(0, devpriv->mmio + S626_P_IER);

        /* clear interrupt */
        writel(irqtype, devpriv->mmio + S626_P_ISR);

        switch (irqtype) {
        case S626_IRQ_RPS1:     /* end_of_scan occurs */
                if (s626_handle_eos_interrupt(dev))
                        irqstatus = 0;
                break;
        case S626_IRQ_GPIO3:    /* check dio and counter interrupt */
                /* s626_dio_clear_irq(dev); */
                s626_check_dio_interrupts(dev);
                s626_check_counter_interrupts(dev);
                break;
        }

        /* enable interrupt */
        writel(irqstatus, devpriv->mmio + S626_P_IER);

        spin_unlock_irqrestore(&dev->spinlock, flags);
        return IRQ_HANDLED;
}

/*
 * This function builds the RPS program for hardware driven acquisition.
 */
static void s626_reset_adc(struct comedi_device *dev, uint8_t *ppl)
{
        struct s626_private *devpriv = dev->private;
        uint32_t *rps;
        uint32_t jmp_adrs;
        uint16_t i;
        uint16_t n;
        uint32_t local_ppl;
        struct comedi_cmd *cmd = &dev->subdevices->async->cmd;

        /* Stop RPS program in case it is currently running */
        s626_mc_disable(dev, S626_MC1_ERPS1, S626_P_MC1);

        /* Set starting logical address to write RPS commands. */
        rps = (uint32_t *)devpriv->rps_buf.logical_base;

        /* Initialize RPS instruction pointer */
        writel((uint32_t)devpriv->rps_buf.physical_base,
               devpriv->mmio + S626_P_RPSADDR1);

        /* Construct RPS program in rps_buf DMA buffer */
        if (cmd != NULL && cmd->scan_begin_src != TRIG_FOLLOW) {
                /* Wait for Start trigger. */
                *rps++ = S626_RPS_PAUSE | S626_RPS_SIGADC;
                *rps++ = S626_RPS_CLRSIGNAL | S626_RPS_SIGADC;
        }

        /*
         * SAA7146 BUG WORKAROUND Do a dummy DEBI Write.  This is necessary
         * because the first RPS DEBI Write following a non-RPS DEBI write
         * seems to always fail.  If we don't do this dummy write, the ADC
         * gain might not be set to the value required for the first slot in
         * the poll list; the ADC gain would instead remain unchanged from
         * the previously programmed value.
         */
        /* Write DEBI Write command and address to shadow RAM. */
        *rps++ = S626_RPS_LDREG | (S626_P_DEBICMD >> 2);
        *rps++ = S626_DEBI_CMD_WRWORD | S626_LP_GSEL;
        *rps++ = S626_RPS_LDREG | (S626_P_DEBIAD >> 2);
        /* Write DEBI immediate data  to shadow RAM: */
        *rps++ = S626_GSEL_BIPOLAR5V;   /* arbitrary immediate data  value. */
        *rps++ = S626_RPS_CLRSIGNAL | S626_RPS_DEBI;
        /* Reset "shadow RAM  uploaded" flag. */
        /* Invoke shadow RAM upload. */
        *rps++ = S626_RPS_UPLOAD | S626_RPS_DEBI;
        /* Wait for shadow upload to finish. */
        *rps++ = S626_RPS_PAUSE | S626_RPS_DEBI;

        /*
         * Digitize all slots in the poll list. This is implemented as a
         * for loop to limit the slot count to 16 in case the application
         * forgot to set the S626_EOPL flag in the final slot.
         */
        for (devpriv->adc_items = 0; devpriv->adc_items < 16;
             devpriv->adc_items++) {
                /*
                 * Convert application's poll list item to private board class
                 * format.  Each app poll list item is an uint8_t with form
                 * (EOPL,x,x,RANGE,CHAN<3:0>), where RANGE code indicates 0 =
                 * +-10V, 1 = +-5V, and EOPL = End of Poll List marker.
                 */
                local_ppl = (*ppl << 8) | (*ppl & 0x10 ? S626_GSEL_BIPOLAR5V :
                                           S626_GSEL_BIPOLAR10V);

                /* Switch ADC analog gain. */
                /* Write DEBI command and address to shadow RAM. */
                *rps++ = S626_RPS_LDREG | (S626_P_DEBICMD >> 2);
                *rps++ = S626_DEBI_CMD_WRWORD | S626_LP_GSEL;
                /* Write DEBI immediate data to shadow RAM. */
                *rps++ = S626_RPS_LDREG | (S626_P_DEBIAD >> 2);
                *rps++ = local_ppl;
                /* Reset "shadow RAM uploaded" flag. */
                *rps++ = S626_RPS_CLRSIGNAL | S626_RPS_DEBI;
                /* Invoke shadow RAM upload. */
                *rps++ = S626_RPS_UPLOAD | S626_RPS_DEBI;
                /* Wait for shadow upload to finish. */
                *rps++ = S626_RPS_PAUSE | S626_RPS_DEBI;
                /* Select ADC analog input channel. */
                *rps++ = S626_RPS_LDREG | (S626_P_DEBICMD >> 2);
                /* Write DEBI command and address to shadow RAM. */
                *rps++ = S626_DEBI_CMD_WRWORD | S626_LP_ISEL;
                *rps++ = S626_RPS_LDREG | (S626_P_DEBIAD >> 2);
                /* Write DEBI immediate data to shadow RAM. */
                *rps++ = local_ppl;
                /* Reset "shadow RAM uploaded" flag. */
                *rps++ = S626_RPS_CLRSIGNAL | S626_RPS_DEBI;
                /* Invoke shadow RAM upload. */
                *rps++ = S626_RPS_UPLOAD | S626_RPS_DEBI;
                /* Wait for shadow upload to finish. */
                *rps++ = S626_RPS_PAUSE | S626_RPS_DEBI;

                /*
                 * Delay at least 10 microseconds for analog input settling.
                 * Instead of padding with NOPs, we use S626_RPS_JUMP
                 * instructions here; this allows us to produce a longer delay
                 * than is possible with NOPs because each S626_RPS_JUMP
                 * flushes the RPS' instruction prefetch pipeline.
                 */
                jmp_adrs =
                        (uint32_t)devpriv->rps_buf.physical_base +
                        (uint32_t)((unsigned long)rps -
                                   (unsigned long)devpriv->
                                                  rps_buf.logical_base);
                for (i = 0; i < (10 * S626_RPSCLK_PER_US / 2); i++) {
                        jmp_adrs += 8;  /* Repeat to implement time delay: */
                        /* Jump to next RPS instruction. */
                        *rps++ = S626_RPS_JUMP;
                        *rps++ = jmp_adrs;
                }

                if (cmd != NULL && cmd->convert_src != TRIG_NOW) {
                        /* Wait for Start trigger. */
                        *rps++ = S626_RPS_PAUSE | S626_RPS_SIGADC;
                        *rps++ = S626_RPS_CLRSIGNAL | S626_RPS_SIGADC;
                }
                /* Start ADC by pulsing GPIO1. */
                /* Begin ADC Start pulse. */
                *rps++ = S626_RPS_LDREG | (S626_P_GPIO >> 2);
                *rps++ = S626_GPIO_BASE | S626_GPIO1_LO;
                *rps++ = S626_RPS_NOP;
                /* VERSION 2.03 CHANGE: STRETCH OUT ADC START PULSE. */
                /* End ADC Start pulse. */
                *rps++ = S626_RPS_LDREG | (S626_P_GPIO >> 2);
                *rps++ = S626_GPIO_BASE | S626_GPIO1_HI;
                /*
                 * Wait for ADC to complete (GPIO2 is asserted high when ADC not
                 * busy) and for data from previous conversion to shift into FB
                 * BUFFER 1 register.
                 */
                /* Wait for ADC done. */
                *rps++ = S626_RPS_PAUSE | S626_RPS_GPIO2;

                /* Transfer ADC data from FB BUFFER 1 register to DMA buffer. */
                *rps++ = S626_RPS_STREG |
                         (S626_BUGFIX_STREG(S626_P_FB_BUFFER1) >> 2);
                *rps++ = (uint32_t)devpriv->ana_buf.physical_base +
                         (devpriv->adc_items << 2);

                /*
                 * If this slot's EndOfPollList flag is set, all channels have
                 * now been processed.
                 */
                if (*ppl++ & S626_EOPL) {
                        devpriv->adc_items++; /* Adjust poll list item count. */
                        break;  /* Exit poll list processing loop. */
                }
        }

        /*
         * VERSION 2.01 CHANGE: DELAY CHANGED FROM 250NS to 2US.  Allow the
         * ADC to stabilize for 2 microseconds before starting the final
         * (dummy) conversion.  This delay is necessary to allow sufficient
         * time between last conversion finished and the start of the dummy
         * conversion.  Without this delay, the last conversion's data value
         * is sometimes set to the previous conversion's data value.
         */
        for (n = 0; n < (2 * S626_RPSCLK_PER_US); n++)
                *rps++ = S626_RPS_NOP;

        /*
         * Start a dummy conversion to cause the data from the last
         * conversion of interest to be shifted in.
         */
        /* Begin ADC Start pulse. */
        *rps++ = S626_RPS_LDREG | (S626_P_GPIO >> 2);
        *rps++ = S626_GPIO_BASE | S626_GPIO1_LO;
        *rps++ = S626_RPS_NOP;
        /* VERSION 2.03 CHANGE: STRETCH OUT ADC START PULSE. */
        *rps++ = S626_RPS_LDREG | (S626_P_GPIO >> 2); /* End ADC Start pulse. */
        *rps++ = S626_GPIO_BASE | S626_GPIO1_HI;

        /*
         * Wait for the data from the last conversion of interest to arrive
         * in FB BUFFER 1 register.
         */
        *rps++ = S626_RPS_PAUSE | S626_RPS_GPIO2;       /* Wait for ADC done. */

        /* Transfer final ADC data from FB BUFFER 1 register to DMA buffer. */
        *rps++ = S626_RPS_STREG | (S626_BUGFIX_STREG(S626_P_FB_BUFFER1) >> 2);
        *rps++ = (uint32_t)devpriv->ana_buf.physical_base +
                 (devpriv->adc_items << 2);

        /* Indicate ADC scan loop is finished. */
        /* Signal ReadADC() that scan is done. */
        /* *rps++= S626_RPS_CLRSIGNAL | S626_RPS_SIGADC; */

        /* invoke interrupt */
        if (devpriv->ai_cmd_running == 1)
                *rps++ = S626_RPS_IRQ;

        /* Restart RPS program at its beginning. */
        *rps++ = S626_RPS_JUMP; /* Branch to start of RPS program. */
        *rps++ = (uint32_t)devpriv->rps_buf.physical_base;

        /* End of RPS program build */
}

#ifdef unused_code
static int s626_ai_rinsn(struct comedi_device *dev,
                         struct comedi_subdevice *s,
                         struct comedi_insn *insn,
                         unsigned int *data)
{
        struct s626_private *devpriv = dev->private;
        uint8_t i;
        int32_t *readaddr;

        /* Trigger ADC scan loop start */
        s626_mc_enable(dev, S626_MC2_ADC_RPS, S626_P_MC2);

        /* Wait until ADC scan loop is finished (RPS Signal 0 reset) */
        while (s626_mc_test(dev, S626_MC2_ADC_RPS, S626_P_MC2))
                ;

        /*
         * Init ptr to DMA buffer that holds new ADC data.  We skip the
         * first uint16_t in the buffer because it contains junk data from
         * the final ADC of the previous poll list scan.
         */
        readaddr = (uint32_t *)devpriv->ana_buf.logical_base + 1;

        /*
         * Convert ADC data to 16-bit integer values and
         * copy to application buffer.
         */
        for (i = 0; i < devpriv->adc_items; i++) {
                *data = s626_ai_reg_to_uint(*readaddr++);
                data++;
        }

        return i;
}
#endif

static int s626_ai_insn_read(struct comedi_device *dev,
                             struct comedi_subdevice *s,
                             struct comedi_insn *insn, unsigned int *data)
{
        struct s626_private *devpriv = dev->private;
        uint16_t chan = CR_CHAN(insn->chanspec);
        uint16_t range = CR_RANGE(insn->chanspec);
        uint16_t adc_spec = 0;
        uint32_t gpio_image;
        uint32_t tmp;
        int n;

        /*
         * Convert application's ADC specification into form
         *  appropriate for register programming.
         */
        if (range == 0)
                adc_spec = (chan << 8) | (S626_GSEL_BIPOLAR5V);
        else
                adc_spec = (chan << 8) | (S626_GSEL_BIPOLAR10V);

        /* Switch ADC analog gain. */
        s626_debi_write(dev, S626_LP_GSEL, adc_spec);   /* Set gain. */

        /* Select ADC analog input channel. */
        s626_debi_write(dev, S626_LP_ISEL, adc_spec);   /* Select channel. */

        for (n = 0; n < insn->n; n++) {
                /* Delay 10 microseconds for analog input settling. */
                udelay(10);

                /* Start ADC by pulsing GPIO1 low */
                gpio_image = readl(devpriv->mmio + S626_P_GPIO);
                /* Assert ADC Start command */
                writel(gpio_image & ~S626_GPIO1_HI,
                       devpriv->mmio + S626_P_GPIO);
                /* and stretch it out */
                writel(gpio_image & ~S626_GPIO1_HI,
                       devpriv->mmio + S626_P_GPIO);
                writel(gpio_image & ~S626_GPIO1_HI,
                       devpriv->mmio + S626_P_GPIO);
                /* Negate ADC Start command */
                writel(gpio_image | S626_GPIO1_HI, devpriv->mmio + S626_P_GPIO);

                /*
                 * Wait for ADC to complete (GPIO2 is asserted high when
                 * ADC not busy) and for data from previous conversion to
                 * shift into FB BUFFER 1 register.
                 */

                /* Wait for ADC done */
                while (!(readl(devpriv->mmio + S626_P_PSR) & S626_PSR_GPIO2))
                        ;

                /* Fetch ADC data */
                if (n != 0) {
                        tmp = readl(devpriv->mmio + S626_P_FB_BUFFER1);
                        data[n - 1] = s626_ai_reg_to_uint(tmp);
                }

                /*
                 * Allow the ADC to stabilize for 4 microseconds before
                 * starting the next (final) conversion.  This delay is
                 * necessary to allow sufficient time between last
                 * conversion finished and the start of the next
                 * conversion.  Without this delay, the last conversion's
                 * data value is sometimes set to the previous
                 * conversion's data value.
                 */
                udelay(4);
        }

        /*
         * Start a dummy conversion to cause the data from the
         * previous conversion to be shifted in.
         */
        gpio_image = readl(devpriv->mmio + S626_P_GPIO);
        /* Assert ADC Start command */
        writel(gpio_image & ~S626_GPIO1_HI, devpriv->mmio + S626_P_GPIO);
        /* and stretch it out */
        writel(gpio_image & ~S626_GPIO1_HI, devpriv->mmio + S626_P_GPIO);
        writel(gpio_image & ~S626_GPIO1_HI, devpriv->mmio + S626_P_GPIO);
        /* Negate ADC Start command */
        writel(gpio_image | S626_GPIO1_HI, devpriv->mmio + S626_P_GPIO);

        /* Wait for the data to arrive in FB BUFFER 1 register. */

        /* Wait for ADC done */
        while (!(readl(devpriv->mmio + S626_P_PSR) & S626_PSR_GPIO2))
                ;

        /* Fetch ADC data from audio interface's input shift register. */

        /* Fetch ADC data */
        if (n != 0) {
                tmp = readl(devpriv->mmio + S626_P_FB_BUFFER1);
                data[n - 1] = s626_ai_reg_to_uint(tmp);
        }

        return n;
}

static int s626_ai_load_polllist(uint8_t *ppl, struct comedi_cmd *cmd)
{
        int n;

        for (n = 0; n < cmd->chanlist_len; n++) {
                if (CR_RANGE(cmd->chanlist[n]) == 0)
                        ppl[n] = CR_CHAN(cmd->chanlist[n]) | S626_RANGE_5V;
                else
                        ppl[n] = CR_CHAN(cmd->chanlist[n]) | S626_RANGE_10V;
        }
        if (n != 0)
                ppl[n - 1] |= S626_EOPL;

        return n;
}

static int s626_ai_inttrig(struct comedi_device *dev,
                           struct comedi_subdevice *s, unsigned int trignum)
{
        if (trignum != 0)
                return -EINVAL;

        /* Start executing the RPS program */
        s626_mc_enable(dev, S626_MC1_ERPS1, S626_P_MC1);

        s->async->inttrig = NULL;

        return 1;
}

/*
 * This function doesn't require a particular form, this is just what
 * happens to be used in some of the drivers.  It should convert ns
 * nanoseconds to a counter value suitable for programming the device.
 * Also, it should adjust ns so that it cooresponds to the actual time
 * that the device will use.
 */
static int s626_ns_to_timer(int *nanosec, int round_mode)
{
        int divider, base;

        base = 500;             /* 2MHz internal clock */

        switch (round_mode) {
        case TRIG_ROUND_NEAREST:
        default:
                divider = (*nanosec + base / 2) / base;
                break;
        case TRIG_ROUND_DOWN:
                divider = (*nanosec) / base;
                break;
        case TRIG_ROUND_UP:
                divider = (*nanosec + base - 1) / base;
                break;
        }

        *nanosec = base * divider;
        return divider - 1;
}

static void s626_timer_load(struct comedi_device *dev,
                            const struct s626_enc_info *k, int tick)
{
        uint16_t setup =
                /* Preload upon index. */
                S626_SET_STD_LOADSRC(S626_LOADSRC_INDX) |
                /* Disable hardware index. */
                S626_SET_STD_INDXSRC(S626_INDXSRC_SOFT) |
                /* Operating mode is Timer. */
                S626_SET_STD_ENCMODE(S626_ENCMODE_TIMER) |
                /* Count direction is Down. */
                S626_SET_STD_CLKPOL(S626_CNTDIR_DOWN) |
                /* Clock multiplier is 1x. */
                S626_SET_STD_CLKMULT(S626_CLKMULT_1X) |
                /* Enabled by index */
                S626_SET_STD_CLKENAB(S626_CLKENAB_INDEX);
        uint16_t value_latchsrc = S626_LATCHSRC_A_INDXA;
        /* uint16_t enab = S626_CLKENAB_ALWAYS; */

        k->set_mode(dev, k, setup, false);

        /* Set the preload register */
        s626_preload(dev, k, tick);

        /*
         * Software index pulse forces the preload register to load
         * into the counter
         */
        k->set_load_trig(dev, k, 0);
        k->pulse_index(dev, k);

        /* set reload on counter overflow */
        k->set_load_trig(dev, k, 1);

        /* set interrupt on overflow */
        k->set_int_src(dev, k, S626_INTSRC_OVER);

        s626_set_latch_source(dev, k, value_latchsrc);
        /* k->set_enable(dev, k, (uint16_t)(enab != 0)); */
}

/* TO COMPLETE  */
static int s626_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
        struct s626_private *devpriv = dev->private;
        uint8_t ppl[16];
        struct comedi_cmd *cmd = &s->async->cmd;
        const struct s626_enc_info *k;
        int tick;

        if (devpriv->ai_cmd_running) {
                dev_err(dev->class_dev,
                        "s626_ai_cmd: Another ai_cmd is running\n");
                return -EBUSY;
        }
        /* disable interrupt */
        writel(0, devpriv->mmio + S626_P_IER);

        /* clear interrupt request */
        writel(S626_IRQ_RPS1 | S626_IRQ_GPIO3, devpriv->mmio + S626_P_ISR);

        /* clear any pending interrupt */
        s626_dio_clear_irq(dev);
        /* s626_enc_clear_irq(dev); */

        /* reset ai_cmd_running flag */
        devpriv->ai_cmd_running = 0;

        /* test if cmd is valid */
        if (cmd == NULL)
                return -EINVAL;

        if (dev->irq == 0) {
                comedi_error(dev,
                             "s626_ai_cmd: cannot run command without an irq");
                return -EIO;
        }

        s626_ai_load_polllist(ppl, cmd);
        devpriv->ai_cmd_running = 1;
        devpriv->ai_convert_count = 0;

        switch (cmd->scan_begin_src) {
        case TRIG_FOLLOW:
                break;
        case TRIG_TIMER:
                /*
                 * set a counter to generate adc trigger at scan_begin_arg
                 * interval
                 */
                k = &s626_enc_chan_info[5];
                tick = s626_ns_to_timer((int *)&cmd->scan_begin_arg,
                                        cmd->flags & TRIG_ROUND_MASK);

                /* load timer value and enable interrupt */
                s626_timer_load(dev, k, tick);
                k->set_enable(dev, k, S626_CLKENAB_ALWAYS);
                break;
        case TRIG_EXT:
                /* set the digital line and interrupt for scan trigger */
                if (cmd->start_src != TRIG_EXT)
                        s626_dio_set_irq(dev, cmd->scan_begin_arg);
                break;
        }

        switch (cmd->convert_src) {
        case TRIG_NOW:
                break;
        case TRIG_TIMER:
                /*
                 * set a counter to generate adc trigger at convert_arg
                 * interval
                 */
                k = &s626_enc_chan_info[4];
                tick = s626_ns_to_timer((int *)&cmd->convert_arg,
                                        cmd->flags & TRIG_ROUND_MASK);

                /* load timer value and enable interrupt */
                s626_timer_load(dev, k, tick);
                k->set_enable(dev, k, S626_CLKENAB_INDEX);
                break;
        case TRIG_EXT:
                /* set the digital line and interrupt for convert trigger */
                if (cmd->scan_begin_src != TRIG_EXT &&
                    cmd->start_src == TRIG_EXT)
                        s626_dio_set_irq(dev, cmd->convert_arg);
                break;
        }

        switch (cmd->stop_src) {
        case TRIG_COUNT:
                /* data arrives as one packet */
                devpriv->ai_sample_count = cmd->stop_arg;
                devpriv->ai_continuous = 0;
                break;
        case TRIG_NONE:
                /* continuous acquisition */
                devpriv->ai_continuous = 1;
                devpriv->ai_sample_count = 1;
                break;
        }

        s626_reset_adc(dev, ppl);

        switch (cmd->start_src) {
        case TRIG_NOW:
                /* Trigger ADC scan loop start */
                /* s626_mc_enable(dev, S626_MC2_ADC_RPS, S626_P_MC2); */

                /* Start executing the RPS program */
                s626_mc_enable(dev, S626_MC1_ERPS1, S626_P_MC1);
                s->async->inttrig = NULL;
                break;
        case TRIG_EXT:
                /* configure DIO channel for acquisition trigger */
                s626_dio_set_irq(dev, cmd->start_arg);
                s->async->inttrig = NULL;
                break;
        case TRIG_INT:
                s->async->inttrig = s626_ai_inttrig;
                break;
        }

        /* enable interrupt */
        writel(S626_IRQ_GPIO3 | S626_IRQ_RPS1, devpriv->mmio + S626_P_IER);

        return 0;
}

static int s626_ai_cmdtest(struct comedi_device *dev,
                           struct comedi_subdevice *s, struct comedi_cmd *cmd)
{
        int err = 0;
        int tmp;

        /* Step 1 : check if triggers are trivially valid */

        err |= cfc_check_trigger_src(&cmd->start_src,
                                     TRIG_NOW | TRIG_INT | TRIG_EXT);
        err |= cfc_check_trigger_src(&cmd->scan_begin_src,
                                     TRIG_TIMER | TRIG_EXT | TRIG_FOLLOW);
        err |= cfc_check_trigger_src(&cmd->convert_src,
                                     TRIG_TIMER | TRIG_EXT | TRIG_NOW);
        err |= cfc_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT);
        err |= cfc_check_trigger_src(&cmd->stop_src, TRIG_COUNT | TRIG_NONE);

        if (err)
                return 1;

        /* Step 2a : make sure trigger sources are unique */

        err |= cfc_check_trigger_is_unique(cmd->start_src);
        err |= cfc_check_trigger_is_unique(cmd->scan_begin_src);
        err |= cfc_check_trigger_is_unique(cmd->convert_src);
        err |= cfc_check_trigger_is_unique(cmd->stop_src);

        /* Step 2b : and mutually compatible */

        if (err)
                return 2;

        /* step 3: make sure arguments are trivially compatible */

        if (cmd->start_src != TRIG_EXT)
                err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
        if (cmd->start_src == TRIG_EXT)
                err |= cfc_check_trigger_arg_max(&cmd->start_arg, 39);
        if (cmd->scan_begin_src == TRIG_EXT)
                err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg, 39);
        if (cmd->convert_src == TRIG_EXT)
                err |= cfc_check_trigger_arg_max(&cmd->convert_arg, 39);

#define S626_MAX_SPEED  200000  /* in nanoseconds */
#define S626_MIN_SPEED  2000000000      /* in nanoseconds */

        if (cmd->scan_begin_src == TRIG_TIMER) {
                err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
                                                 S626_MAX_SPEED);
                err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg,
                                                 S626_MIN_SPEED);
        } else {
                /* external trigger */
                /* should be level/edge, hi/lo specification here */
                /* should specify multiple external triggers */
                /* err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg, 9); */
        }
        if (cmd->convert_src == TRIG_TIMER) {
                err |= cfc_check_trigger_arg_min(&cmd->convert_arg,
                                                 S626_MAX_SPEED);
                err |= cfc_check_trigger_arg_max(&cmd->convert_arg,
                                                 S626_MIN_SPEED);
        } else {
                /* external trigger */
                /* see above */
                /* err |= cfc_check_trigger_arg_max(&cmd->scan_begin_arg, 9); */
        }

        err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);

        if (cmd->stop_src == TRIG_COUNT)
                err |= cfc_check_trigger_arg_max(&cmd->stop_arg, 0x00ffffff);
        else    /* TRIG_NONE */
                err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);

        if (err)
                return 3;

        /* step 4: fix up any arguments */

        if (cmd->scan_begin_src == TRIG_TIMER) {
                tmp = cmd->scan_begin_arg;
                s626_ns_to_timer((int *)&cmd->scan_begin_arg,
                                 cmd->flags & TRIG_ROUND_MASK);
                if (tmp != cmd->scan_begin_arg)
                        err++;
        }
        if (cmd->convert_src == TRIG_TIMER) {
                tmp = cmd->convert_arg;
                s626_ns_to_timer((int *)&cmd->convert_arg,
                                 cmd->flags & TRIG_ROUND_MASK);
                if (tmp != cmd->convert_arg)
                        err++;
                if (cmd->scan_begin_src == TRIG_TIMER &&
                    cmd->scan_begin_arg < cmd->convert_arg *
                                          cmd->scan_end_arg) {
                        cmd->scan_begin_arg = cmd->convert_arg *
                                              cmd->scan_end_arg;
                        err++;
                }
        }

        if (err)
                return 4;

        return 0;
}

static int s626_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
{
        struct s626_private *devpriv = dev->private;

        /* Stop RPS program in case it is currently running */
        s626_mc_disable(dev, S626_MC1_ERPS1, S626_P_MC1);

        /* disable master interrupt */
        writel(0, devpriv->mmio + S626_P_IER);

        devpriv->ai_cmd_running = 0;

        return 0;
}

static int s626_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
                         struct comedi_insn *insn, unsigned int *data)
{
        struct s626_private *devpriv = dev->private;
        int i;
        uint16_t chan = CR_CHAN(insn->chanspec);
        int16_t dacdata;

        for (i = 0; i < insn->n; i++) {
                dacdata = (int16_t) data[i];
                devpriv->ao_readback[CR_CHAN(insn->chanspec)] = data[i];
                dacdata -= (0x1fff);

                s626_set_dac(dev, chan, dacdata);
        }

        return i;
}

static int s626_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
                         struct comedi_insn *insn, unsigned int *data)
{
        struct s626_private *devpriv = dev->private;
        int i;

        for (i = 0; i < insn->n; i++)
                data[i] = devpriv->ao_readback[CR_CHAN(insn->chanspec)];

        return i;
}

/* *************** DIGITAL I/O FUNCTIONS *************** */

/*
 * All DIO functions address a group of DIO channels by means of
 * "group" argument.  group may be 0, 1 or 2, which correspond to DIO
 * ports A, B and C, respectively.
 */

static void s626_dio_init(struct comedi_device *dev)
{
        uint16_t group;

        /* Prepare to treat writes to WRCapSel as capture disables. */
        s626_debi_write(dev, S626_LP_MISC1, S626_MISC1_NOEDCAP);

        /* For each group of sixteen channels ... */
        for (group = 0; group < S626_DIO_BANKS; group++) {
                /* Disable all interrupts */
                s626_debi_write(dev, S626_LP_WRINTSEL(group), 0);
                /* Disable all event captures */
                s626_debi_write(dev, S626_LP_WRCAPSEL(group), 0xffff);
                /* Init all DIOs to default edge polarity */
                s626_debi_write(dev, S626_LP_WREDGSEL(group), 0);
                /* Program all outputs to inactive state */
                s626_debi_write(dev, S626_LP_WRDOUT(group), 0);
        }
}

static int s626_dio_insn_bits(struct comedi_device *dev,
                              struct comedi_subdevice *s,
                              struct comedi_insn *insn,
                              unsigned int *data)
{
        unsigned long group = (unsigned long)s->private;

        if (comedi_dio_update_state(s, data))
                s626_debi_write(dev, S626_LP_WRDOUT(group), s->state);

        data[1] = s626_debi_read(dev, S626_LP_RDDIN(group));

        return insn->n;
}

static int s626_dio_insn_config(struct comedi_device *dev,
                                struct comedi_subdevice *s,
                                struct comedi_insn *insn,
                                unsigned int *data)
{
        unsigned long group = (unsigned long)s->private;
        int ret;

        ret = comedi_dio_insn_config(dev, s, insn, data, 0);
        if (ret)
                return ret;

        s626_debi_write(dev, S626_LP_WRDOUT(group), s->io_bits);

        return insn->n;
}

/*
 * Now this function initializes the value of the counter (data[0])
 * and set the subdevice. To complete with trigger and interrupt
 * configuration.
 *
 * FIXME: data[0] is supposed to be an INSN_CONFIG_xxx constant indicating
 * what is being configured, but this function appears to be using data[0]
 * as a variable.
 */
static int s626_enc_insn_config(struct comedi_device *dev,
                                struct comedi_subdevice *s,
                                struct comedi_insn *insn, unsigned int *data)
{
        uint16_t setup =
                /* Preload upon index. */
                S626_SET_STD_LOADSRC(S626_LOADSRC_INDX) |
                /* Disable hardware index. */
                S626_SET_STD_INDXSRC(S626_INDXSRC_SOFT) |
                /* Operating mode is Counter. */
                S626_SET_STD_ENCMODE(S626_ENCMODE_COUNTER) |
                /* Active high clock. */
                S626_SET_STD_CLKPOL(S626_CLKPOL_POS) |
                /* Clock multiplier is 1x. */
                S626_SET_STD_CLKMULT(S626_CLKMULT_1X) |
                /* Enabled by index */
                S626_SET_STD_CLKENAB(S626_CLKENAB_INDEX);
        /* uint16_t disable_int_src = true; */
        /* uint32_t Preloadvalue;              //Counter initial value */
        uint16_t value_latchsrc = S626_LATCHSRC_AB_READ;
        uint16_t enab = S626_CLKENAB_ALWAYS;
        const struct s626_enc_info *k =
                &s626_enc_chan_info[CR_CHAN(insn->chanspec)];

        /* (data==NULL) ? (Preloadvalue=0) : (Preloadvalue=data[0]); */

        k->set_mode(dev, k, setup, true);
        s626_preload(dev, k, data[0]);
        k->pulse_index(dev, k);
        s626_set_latch_source(dev, k, value_latchsrc);
        k->set_enable(dev, k, (enab != 0));

        return insn->n;
}

static int s626_enc_insn_read(struct comedi_device *dev,
                              struct comedi_subdevice *s,
                              struct comedi_insn *insn, unsigned int *data)
{
        int n;
        const struct s626_enc_info *k =
                &s626_enc_chan_info[CR_CHAN(insn->chanspec)];

        for (n = 0; n < insn->n; n++)
                data[n] = s626_read_latch(dev, k);

        return n;
}

static int s626_enc_insn_write(struct comedi_device *dev,
                               struct comedi_subdevice *s,
                               struct comedi_insn *insn, unsigned int *data)
{
        const struct s626_enc_info *k =
                &s626_enc_chan_info[CR_CHAN(insn->chanspec)];

        /* Set the preload register */
        s626_preload(dev, k, data[0]);

        /*
         * Software index pulse forces the preload register to load
         * into the counter
         */
        k->set_load_trig(dev, k, 0);
        k->pulse_index(dev, k);
        k->set_load_trig(dev, k, 2);

        return 1;
}

static void s626_write_misc2(struct comedi_device *dev, uint16_t new_image)
{
        s626_debi_write(dev, S626_LP_MISC1, S626_MISC1_WENABLE);
        s626_debi_write(dev, S626_LP_WRMISC2, new_image);
        s626_debi_write(dev, S626_LP_MISC1, S626_MISC1_WDISABLE);
}

static void s626_close_dma_b(struct comedi_device *dev,
                             struct s626_buffer_dma *pdma, size_t bsize)
{
        struct pci_dev *pcidev = comedi_to_pci_dev(dev);
        void *vbptr;
        dma_addr_t vpptr;

        if (pdma == NULL)
                return;

        /* find the matching allocation from the board struct */
        vbptr = pdma->logical_base;
        vpptr = pdma->physical_base;
        if (vbptr) {
                pci_free_consistent(pcidev, bsize, vbptr, vpptr);
                pdma->logical_base = NULL;
                pdma->physical_base = 0;
        }
}

static void s626_counters_init(struct comedi_device *dev)
{
        int chan;
        const struct s626_enc_info *k;
        uint16_t setup =
                /* Preload upon index. */
                S626_SET_STD_LOADSRC(S626_LOADSRC_INDX) |
                /* Disable hardware index. */
                S626_SET_STD_INDXSRC(S626_INDXSRC_SOFT) |
                /* Operating mode is counter. */
                S626_SET_STD_ENCMODE(S626_ENCMODE_COUNTER) |
                /* Active high clock. */
                S626_SET_STD_CLKPOL(S626_CLKPOL_POS) |
                /* Clock multiplier is 1x. */
                S626_SET_STD_CLKMULT(S626_CLKMULT_1X) |
                /* Enabled by index */
                S626_SET_STD_CLKENAB(S626_CLKENAB_INDEX);

        /*
         * Disable all counter interrupts and clear any captured counter events.
         */
        for (chan = 0; chan < S626_ENCODER_CHANNELS; chan++) {
                k = &s626_enc_chan_info[chan];
                k->set_mode(dev, k, setup, true);
                k->set_int_src(dev, k, 0);
                k->reset_cap_flags(dev, k);
                k->set_enable(dev, k, S626_CLKENAB_ALWAYS);
        }
}

static int s626_allocate_dma_buffers(struct comedi_device *dev)
{
        struct pci_dev *pcidev = comedi_to_pci_dev(dev);
        struct s626_private *devpriv = dev->private;
        void *addr;
        dma_addr_t appdma;

        addr = pci_alloc_consistent(pcidev, S626_DMABUF_SIZE, &appdma);
        if (!addr)
                return -ENOMEM;
        devpriv->ana_buf.logical_base = addr;
        devpriv->ana_buf.physical_base = appdma;

        addr = pci_alloc_consistent(pcidev, S626_DMABUF_SIZE, &appdma);
        if (!addr)
                return -ENOMEM;
        devpriv->rps_buf.logical_base = addr;
        devpriv->rps_buf.physical_base = appdma;

        return 0;
}

static void s626_initialize(struct comedi_device *dev)
{
        struct s626_private *devpriv = dev->private;
        dma_addr_t phys_buf;
        uint16_t chan;
        int i;

        /* Enable DEBI and audio pins, enable I2C interface */
        s626_mc_enable(dev, S626_MC1_DEBI | S626_MC1_AUDIO | S626_MC1_I2C,
                       S626_P_MC1);

        /*
         * Configure DEBI operating mode
         *
         *  Local bus is 16 bits wide
         *  Declare DEBI transfer timeout interval
         *  Set up byte lane steering
         *  Intel-compatible local bus (DEBI never times out)
         */
        writel(S626_DEBI_CFG_SLAVE16 |
               (S626_DEBI_TOUT << S626_DEBI_CFG_TOUT_BIT) | S626_DEBI_SWAP |
               S626_DEBI_CFG_INTEL, devpriv->mmio + S626_P_DEBICFG);

        /* Disable MMU paging */
        writel(S626_DEBI_PAGE_DISABLE, devpriv->mmio + S626_P_DEBIPAGE);

        /* Init GPIO so that ADC Start* is negated */
        writel(S626_GPIO_BASE | S626_GPIO1_HI, devpriv->mmio + S626_P_GPIO);

        /* I2C device address for onboard eeprom (revb) */
        devpriv->i2c_adrs = 0xA0;

        /*
         * Issue an I2C ABORT command to halt any I2C
         * operation in progress and reset BUSY flag.
         */
        writel(S626_I2C_CLKSEL | S626_I2C_ABORT,
               devpriv->mmio + S626_P_I2CSTAT);
        s626_mc_enable(dev, S626_MC2_UPLD_IIC, S626_P_MC2);
        while (!(readl(devpriv->mmio + S626_P_MC2) & S626_MC2_UPLD_IIC))
                ;

        /*
         * Per SAA7146 data sheet, write to STATUS
         * reg twice to reset all  I2C error flags.
         */
        for (i = 0; i < 2; i++) {
                writel(S626_I2C_CLKSEL, devpriv->mmio + S626_P_I2CSTAT);
                s626_mc_enable(dev, S626_MC2_UPLD_IIC, S626_P_MC2);
                while (!s626_mc_test(dev, S626_MC2_UPLD_IIC, S626_P_MC2))
                        ;
        }

        /*
         * Init audio interface functional attributes: set DAC/ADC
         * serial clock rates, invert DAC serial clock so that
         * DAC data setup times are satisfied, enable DAC serial
         * clock out.
         */
        writel(S626_ACON2_INIT, devpriv->mmio + S626_P_ACON2);

        /*
         * Set up TSL1 slot list, which is used to control the
         * accumulation of ADC data: S626_RSD1 = shift data in on SD1.
         * S626_SIB_A1  = store data uint8_t at next available location
         * in FB BUFFER1 register.
         */
        writel(S626_RSD1 | S626_SIB_A1, devpriv->mmio + S626_P_TSL1);
        writel(S626_RSD1 | S626_SIB_A1 | S626_EOS,
               devpriv->mmio + S626_P_TSL1 + 4);

        /* Enable TSL1 slot list so that it executes all the time */
        writel(S626_ACON1_ADCSTART, devpriv->mmio + S626_P_ACON1);

        /*
         * Initialize RPS registers used for ADC
         */

        /* Physical start of RPS program */
        writel((uint32_t)devpriv->rps_buf.physical_base,
               devpriv->mmio + S626_P_RPSADDR1);
        /* RPS program performs no explicit mem writes */
        writel(0, devpriv->mmio + S626_P_RPSPAGE1);
        /* Disable RPS timeouts */
        writel(0, devpriv->mmio + S626_P_RPS1_TOUT);

#if 0
        /*
         * SAA7146 BUG WORKAROUND
         *
         * Initialize SAA7146 ADC interface to a known state by
         * invoking ADCs until FB BUFFER 1 register shows that it
         * is correctly receiving ADC data. This is necessary
         * because the SAA7146 ADC interface does not start up in
         * a defined state after a PCI reset.
         */
        {
                uint8_t poll_list;
                uint16_t adc_data;
                uint16_t start_val;
                uint16_t index;
                unsigned int data[16];

                /* Create a simple polling list for analog input channel 0 */
                poll_list = S626_EOPL;
                s626_reset_adc(dev, &poll_list);

                /* Get initial ADC value */
                s626_ai_rinsn(dev, dev->subdevices, NULL, data);
                start_val = data[0];

                /*
                 * VERSION 2.01 CHANGE: TIMEOUT ADDED TO PREVENT HANGED
                 * EXECUTION.
                 *
                 * Invoke ADCs until the new ADC value differs from the initial
                 * value or a timeout occurs.  The timeout protects against the
                 * possibility that the driver is restarting and the ADC data is
                 * a fixed value resulting from the applied ADC analog input
                 * being unusually quiet or at the rail.
                 */
                for (index = 0; index < 500; index++) {
                        s626_ai_rinsn(dev, dev->subdevices, NULL, data);
                        adc_data = data[0];
                        if (adc_data != start_val)
                                break;
                }
        }
#endif  /* SAA7146 BUG WORKAROUND */

        /*
         * Initialize the DAC interface
         */

        /*
         * Init Audio2's output DMAC attributes:
         *   burst length = 1 DWORD
         *   threshold = 1 DWORD.
         */
        writel(0, devpriv->mmio + S626_P_PCI_BT_A);

        /*
         * Init Audio2's output DMA physical addresses.  The protection
         * address is set to 1 DWORD past the base address so that a
         * single DWORD will be transferred each time a DMA transfer is
         * enabled.
         */
        phys_buf = devpriv->ana_buf.physical_base +
                   (S626_DAC_WDMABUF_OS * sizeof(uint32_t));
        writel((uint32_t)phys_buf, devpriv->mmio + S626_P_BASEA2_OUT);
        writel((uint32_t)(phys_buf + sizeof(uint32_t)),
               devpriv->mmio + S626_P_PROTA2_OUT);

        /*
         * Cache Audio2's output DMA buffer logical address.  This is
         * where DAC data is buffered for A2 output DMA transfers.
         */
        devpriv->dac_wbuf = (uint32_t *)devpriv->ana_buf.logical_base +
                            S626_DAC_WDMABUF_OS;

        /*
         * Audio2's output channels does not use paging.  The
         * protection violation handling bit is set so that the
         * DMAC will automatically halt and its PCI address pointer
         * will be reset when the protection address is reached.
         */
        writel(8, devpriv->mmio + S626_P_PAGEA2_OUT);

        /*
         * Initialize time slot list 2 (TSL2), which is used to control
         * the clock generation for and serialization of data to be sent
         * to the DAC devices.  Slot 0 is a NOP that is used to trap TSL
         * execution; this permits other slots to be safely modified
         * without first turning off the TSL sequencer (which is
         * apparently impossible to do).  Also, SD3 (which is driven by a
         * pull-up resistor) is shifted in and stored to the MSB of
         * FB_BUFFER2 to be used as evidence that the slot sequence has
         * not yet finished executing.
         */

        /* Slot 0: Trap TSL execution, shift 0xFF into FB_BUFFER2 */
        writel(S626_XSD2 | S626_RSD3 | S626_SIB_A2 | S626_EOS,
               devpriv->mmio + S626_VECTPORT(0));

        /*
         * Initialize slot 1, which is constant.  Slot 1 causes a
         * DWORD to be transferred from audio channel 2's output FIFO
         * to the FIFO's output buffer so that it can be serialized
         * and sent to the DAC during subsequent slots.  All remaining
         * slots are dynamically populated as required by the target
         * DAC device.
         */

        /* Slot 1: Fetch DWORD from Audio2's output FIFO */
        writel(S626_LF_A2, devpriv->mmio + S626_VECTPORT(1));

        /* Start DAC's audio interface (TSL2) running */
        writel(S626_ACON1_DACSTART, devpriv->mmio + S626_P_ACON1);

        /*
         * Init Trim DACs to calibrated values.  Do it twice because the
         * SAA7146 audio channel does not always reset properly and
         * sometimes causes the first few TrimDAC writes to malfunction.
         */
        s626_load_trim_dacs(dev);
        s626_load_trim_dacs(dev);

        /*
         * Manually init all gate array hardware in case this is a soft
         * reset (we have no way of determining whether this is a warm
         * or cold start).  This is necessary because the gate array will
         * reset only in response to a PCI hard reset; there is no soft
         * reset function.
         */

        /*
         * Init all DAC outputs to 0V and init all DAC setpoint and
         * polarity images.
         */
        for (chan = 0; chan < S626_DAC_CHANNELS; chan++)
                s626_set_dac(dev, chan, 0);

        /* Init counters */
        s626_counters_init(dev);

        /*
         * Without modifying the state of the Battery Backup enab, disable
         * the watchdog timer, set DIO channels 0-5 to operate in the
         * standard DIO (vs. counter overflow) mode, disable the battery
         * charger, and reset the watchdog interval selector to zero.
         */
        s626_write_misc2(dev, (s626_debi_read(dev, S626_LP_RDMISC2) &
                               S626_MISC2_BATT_ENABLE));

        /* Initialize the digital I/O subsystem */
        s626_dio_init(dev);
}

static int s626_auto_attach(struct comedi_device *dev,
                                      unsigned long context_unused)
{
        struct pci_dev *pcidev = comedi_to_pci_dev(dev);
        struct s626_private *devpriv;
        struct comedi_subdevice *s;
        int ret;

        devpriv = comedi_alloc_devpriv(dev, sizeof(*devpriv));
        if (!devpriv)
                return -ENOMEM;

        ret = comedi_pci_enable(dev);
        if (ret)
                return ret;

        devpriv->mmio = pci_ioremap_bar(pcidev, 0);
        if (!devpriv->mmio)
                return -ENOMEM;

        /* disable master interrupt */
        writel(0, devpriv->mmio + S626_P_IER);

        /* soft reset */
        writel(S626_MC1_SOFT_RESET, devpriv->mmio + S626_P_MC1);

        /* DMA FIXME DMA// */

        ret = s626_allocate_dma_buffers(dev);
        if (ret)
                return ret;

        if (pcidev->irq) {
                ret = request_irq(pcidev->irq, s626_irq_handler, IRQF_SHARED,
                                  dev->board_name, dev);

                if (ret == 0)
                        dev->irq = pcidev->irq;
        }

        ret = comedi_alloc_subdevices(dev, 6);
        if (ret)
                return ret;

        s = &dev->subdevices[0];
        /* analog input subdevice */
        s->type         = COMEDI_SUBD_AI;
        s->subdev_flags = SDF_READABLE | SDF_DIFF | SDF_CMD_READ;
        s->n_chan       = S626_ADC_CHANNELS;
        s->maxdata      = 0x3fff;
        s->range_table  = &s626_range_table;
        s->len_chanlist = S626_ADC_CHANNELS;
        s->insn_read    = s626_ai_insn_read;
        if (dev->irq) {
                dev->read_subdev = s;
                s->do_cmd       = s626_ai_cmd;
                s->do_cmdtest   = s626_ai_cmdtest;
                s->cancel       = s626_ai_cancel;
        }

        s = &dev->subdevices[1];
        /* analog output subdevice */
        s->type         = COMEDI_SUBD_AO;
        s->subdev_flags = SDF_WRITABLE | SDF_READABLE;
        s->n_chan       = S626_DAC_CHANNELS;
        s->maxdata      = 0x3fff;
        s->range_table  = &range_bipolar10;
        s->insn_write   = s626_ao_winsn;
        s->insn_read    = s626_ao_rinsn;

        s = &dev->subdevices[2];
        /* digital I/O subdevice */
        s->type         = COMEDI_SUBD_DIO;
        s->subdev_flags = SDF_WRITABLE | SDF_READABLE;
        s->n_chan       = 16;
        s->maxdata      = 1;
        s->io_bits      = 0xffff;
        s->private      = (void *)0;    /* DIO group 0 */
        s->range_table  = &range_digital;
        s->insn_config  = s626_dio_insn_config;
        s->insn_bits    = s626_dio_insn_bits;

        s = &dev->subdevices[3];
        /* digital I/O subdevice */
        s->type         = COMEDI_SUBD_DIO;
        s->subdev_flags = SDF_WRITABLE | SDF_READABLE;
        s->n_chan       = 16;
        s->maxdata      = 1;
        s->io_bits      = 0xffff;
        s->private      = (void *)1;    /* DIO group 1 */
        s->range_table  = &range_digital;
        s->insn_config  = s626_dio_insn_config;
        s->insn_bits    = s626_dio_insn_bits;

        s = &dev->subdevices[4];
        /* digital I/O subdevice */
        s->type         = COMEDI_SUBD_DIO;
        s->subdev_flags = SDF_WRITABLE | SDF_READABLE;
        s->n_chan       = 16;
        s->maxdata      = 1;
        s->io_bits      = 0xffff;
        s->private      = (void *)2;    /* DIO group 2 */
        s->range_table  = &range_digital;
        s->insn_config  = s626_dio_insn_config;
        s->insn_bits    = s626_dio_insn_bits;

        s = &dev->subdevices[5];
        /* encoder (counter) subdevice */
        s->type         = COMEDI_SUBD_COUNTER;
        s->subdev_flags = SDF_WRITABLE | SDF_READABLE | SDF_LSAMPL;
        s->n_chan       = S626_ENCODER_CHANNELS;
        s->maxdata      = 0xffffff;
        s->range_table  = &range_unknown;
        s->insn_config  = s626_enc_insn_config;
        s->insn_read    = s626_enc_insn_read;
        s->insn_write   = s626_enc_insn_write;

        s626_initialize(dev);

        dev_info(dev->class_dev, "%s attached\n", dev->board_name);

        return 0;
}

static void s626_detach(struct comedi_device *dev)
{
        struct s626_private *devpriv = dev->private;

        if (devpriv) {
                /* stop ai_command */
                devpriv->ai_cmd_running = 0;

                if (devpriv->mmio) {
                        /* interrupt mask */
                        /* Disable master interrupt */
                        writel(0, devpriv->mmio + S626_P_IER);
                        /* Clear board's IRQ status flag */
                        writel(S626_IRQ_GPIO3 | S626_IRQ_RPS1,
                               devpriv->mmio + S626_P_ISR);

                        /* Disable the watchdog timer and battery charger. */
                        s626_write_misc2(dev, 0);

                        /* Close all interfaces on 7146 device */
                        writel(S626_MC1_SHUTDOWN, devpriv->mmio + S626_P_MC1);
                        writel(S626_ACON1_BASE, devpriv->mmio + S626_P_ACON1);

                        s626_close_dma_b(dev, &devpriv->rps_buf,
                                         S626_DMABUF_SIZE);
                        s626_close_dma_b(dev, &devpriv->ana_buf,
                                         S626_DMABUF_SIZE);
                }

                if (dev->irq)
                        free_irq(dev->irq, dev);
                if (devpriv->mmio)
                        iounmap(devpriv->mmio);
        }
        comedi_pci_disable(dev);
}

static struct comedi_driver s626_driver = {
        .driver_name    = "s626",
        .module         = THIS_MODULE,
        .auto_attach    = s626_auto_attach,
        .detach         = s626_detach,
};

static int s626_pci_probe(struct pci_dev *dev,
                          const struct pci_device_id *id)
{
        return comedi_pci_auto_config(dev, &s626_driver, id->driver_data);
}

/*
 * For devices with vendor:device id == 0x1131:0x7146 you must specify
 * also subvendor:subdevice ids, because otherwise it will conflict with
 * Philips SAA7146 media/dvb based cards.
 */
static DEFINE_PCI_DEVICE_TABLE(s626_pci_table) = {
        { PCI_DEVICE_SUB(PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA7146,
                         0x6000, 0x0272) },
        { 0 }
};
MODULE_DEVICE_TABLE(pci, s626_pci_table);

static struct pci_driver s626_pci_driver = {
        .name           = "s626",
        .id_table       = s626_pci_table,
        .probe          = s626_pci_probe,
        .remove         = comedi_pci_auto_unconfig,
};
module_comedi_pci_driver(s626_driver, s626_pci_driver);

MODULE_AUTHOR("Gianluca Palli <gpalli@deis.unibo.it>");
MODULE_DESCRIPTION("Sensoray 626 Comedi driver module");
MODULE_LICENSE("GPL");