Merge remote-tracking branches 'asoc/fix/atmel', 'asoc/fix/fsl', 'asoc/fix/tegra...
[linux-drm-fsl-dcu.git] / drivers / scsi / pm8001 / pm8001_sas.c
1 /*
2  * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver
3  *
4  * Copyright (c) 2008-2009 USI Co., Ltd.
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions, and the following disclaimer,
12  *    without modification.
13  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
14  *    substantially similar to the "NO WARRANTY" disclaimer below
15  *    ("Disclaimer") and any redistribution must be conditioned upon
16  *    including a substantially similar Disclaimer requirement for further
17  *    binary redistribution.
18  * 3. Neither the names of the above-listed copyright holders nor the names
19  *    of any contributors may be used to endorse or promote products derived
20  *    from this software without specific prior written permission.
21  *
22  * Alternatively, this software may be distributed under the terms of the
23  * GNU General Public License ("GPL") version 2 as published by the Free
24  * Software Foundation.
25  *
26  * NO WARRANTY
27  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
28  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
29  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
30  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
31  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
32  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
33  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
34  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
35  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
36  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
37  * POSSIBILITY OF SUCH DAMAGES.
38  *
39  */
40
41 #include <linux/slab.h>
42 #include "pm8001_sas.h"
43
44 /**
45  * pm8001_find_tag - from sas task to find out  tag that belongs to this task
46  * @task: the task sent to the LLDD
47  * @tag: the found tag associated with the task
48  */
49 static int pm8001_find_tag(struct sas_task *task, u32 *tag)
50 {
51         if (task->lldd_task) {
52                 struct pm8001_ccb_info *ccb;
53                 ccb = task->lldd_task;
54                 *tag = ccb->ccb_tag;
55                 return 1;
56         }
57         return 0;
58 }
59
60 /**
61   * pm8001_tag_clear - clear the tags bitmap
62   * @pm8001_ha: our hba struct
63   * @tag: the found tag associated with the task
64   */
65 static void pm8001_tag_clear(struct pm8001_hba_info *pm8001_ha, u32 tag)
66 {
67         void *bitmap = pm8001_ha->tags;
68         clear_bit(tag, bitmap);
69 }
70
71 void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag)
72 {
73         pm8001_tag_clear(pm8001_ha, tag);
74 }
75
76 static void pm8001_tag_set(struct pm8001_hba_info *pm8001_ha, u32 tag)
77 {
78         void *bitmap = pm8001_ha->tags;
79         set_bit(tag, bitmap);
80 }
81
82 /**
83   * pm8001_tag_alloc - allocate a empty tag for task used.
84   * @pm8001_ha: our hba struct
85   * @tag_out: the found empty tag .
86   */
87 inline int pm8001_tag_alloc(struct pm8001_hba_info *pm8001_ha, u32 *tag_out)
88 {
89         unsigned int index, tag;
90         void *bitmap = pm8001_ha->tags;
91
92         index = find_first_zero_bit(bitmap, pm8001_ha->tags_num);
93         tag = index;
94         if (tag >= pm8001_ha->tags_num)
95                 return -SAS_QUEUE_FULL;
96         pm8001_tag_set(pm8001_ha, tag);
97         *tag_out = tag;
98         return 0;
99 }
100
101 void pm8001_tag_init(struct pm8001_hba_info *pm8001_ha)
102 {
103         int i;
104         for (i = 0; i < pm8001_ha->tags_num; ++i)
105                 pm8001_tag_clear(pm8001_ha, i);
106 }
107
108  /**
109   * pm8001_mem_alloc - allocate memory for pm8001.
110   * @pdev: pci device.
111   * @virt_addr: the allocated virtual address
112   * @pphys_addr_hi: the physical address high byte address.
113   * @pphys_addr_lo: the physical address low byte address.
114   * @mem_size: memory size.
115   */
116 int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr,
117         dma_addr_t *pphys_addr, u32 *pphys_addr_hi,
118         u32 *pphys_addr_lo, u32 mem_size, u32 align)
119 {
120         caddr_t mem_virt_alloc;
121         dma_addr_t mem_dma_handle;
122         u64 phys_align;
123         u64 align_offset = 0;
124         if (align)
125                 align_offset = (dma_addr_t)align - 1;
126         mem_virt_alloc =
127                 pci_alloc_consistent(pdev, mem_size + align, &mem_dma_handle);
128         if (!mem_virt_alloc) {
129                 pm8001_printk("memory allocation error\n");
130                 return -1;
131         }
132         memset((void *)mem_virt_alloc, 0, mem_size+align);
133         *pphys_addr = mem_dma_handle;
134         phys_align = (*pphys_addr + align_offset) & ~align_offset;
135         *virt_addr = (void *)mem_virt_alloc + phys_align - *pphys_addr;
136         *pphys_addr_hi = upper_32_bits(phys_align);
137         *pphys_addr_lo = lower_32_bits(phys_align);
138         return 0;
139 }
140 /**
141   * pm8001_find_ha_by_dev - from domain device which come from sas layer to
142   * find out our hba struct.
143   * @dev: the domain device which from sas layer.
144   */
145 static
146 struct pm8001_hba_info *pm8001_find_ha_by_dev(struct domain_device *dev)
147 {
148         struct sas_ha_struct *sha = dev->port->ha;
149         struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
150         return pm8001_ha;
151 }
152
153 /**
154   * pm8001_phy_control - this function should be registered to
155   * sas_domain_function_template to provide libsas used, note: this is just
156   * control the HBA phy rather than other expander phy if you want control
157   * other phy, you should use SMP command.
158   * @sas_phy: which phy in HBA phys.
159   * @func: the operation.
160   * @funcdata: always NULL.
161   */
162 int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
163         void *funcdata)
164 {
165         int rc = 0, phy_id = sas_phy->id;
166         struct pm8001_hba_info *pm8001_ha = NULL;
167         struct sas_phy_linkrates *rates;
168         DECLARE_COMPLETION_ONSTACK(completion);
169         unsigned long flags;
170         pm8001_ha = sas_phy->ha->lldd_ha;
171         pm8001_ha->phy[phy_id].enable_completion = &completion;
172         switch (func) {
173         case PHY_FUNC_SET_LINK_RATE:
174                 rates = funcdata;
175                 if (rates->minimum_linkrate) {
176                         pm8001_ha->phy[phy_id].minimum_linkrate =
177                                 rates->minimum_linkrate;
178                 }
179                 if (rates->maximum_linkrate) {
180                         pm8001_ha->phy[phy_id].maximum_linkrate =
181                                 rates->maximum_linkrate;
182                 }
183                 if (pm8001_ha->phy[phy_id].phy_state == 0) {
184                         PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
185                         wait_for_completion(&completion);
186                 }
187                 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
188                                               PHY_LINK_RESET);
189                 break;
190         case PHY_FUNC_HARD_RESET:
191                 if (pm8001_ha->phy[phy_id].phy_state == 0) {
192                         PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
193                         wait_for_completion(&completion);
194                 }
195                 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
196                                               PHY_HARD_RESET);
197                 break;
198         case PHY_FUNC_LINK_RESET:
199                 if (pm8001_ha->phy[phy_id].phy_state == 0) {
200                         PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
201                         wait_for_completion(&completion);
202                 }
203                 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
204                                               PHY_LINK_RESET);
205                 break;
206         case PHY_FUNC_RELEASE_SPINUP_HOLD:
207                 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
208                                               PHY_LINK_RESET);
209                 break;
210         case PHY_FUNC_DISABLE:
211                 PM8001_CHIP_DISP->phy_stop_req(pm8001_ha, phy_id);
212                 break;
213         case PHY_FUNC_GET_EVENTS:
214                 spin_lock_irqsave(&pm8001_ha->lock, flags);
215                 if (pm8001_ha->chip_id == chip_8001) {
216                         if (-1 == pm8001_bar4_shift(pm8001_ha,
217                                         (phy_id < 4) ? 0x30000 : 0x40000)) {
218                                 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
219                                 return -EINVAL;
220                         }
221                 }
222                 {
223                         struct sas_phy *phy = sas_phy->phy;
224                         uint32_t *qp = (uint32_t *)(((char *)
225                                 pm8001_ha->io_mem[2].memvirtaddr)
226                                 + 0x1034 + (0x4000 * (phy_id & 3)));
227
228                         phy->invalid_dword_count = qp[0];
229                         phy->running_disparity_error_count = qp[1];
230                         phy->loss_of_dword_sync_count = qp[3];
231                         phy->phy_reset_problem_count = qp[4];
232                 }
233                 if (pm8001_ha->chip_id == chip_8001)
234                         pm8001_bar4_shift(pm8001_ha, 0);
235                 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
236                 return 0;
237         default:
238                 rc = -EOPNOTSUPP;
239         }
240         msleep(300);
241         return rc;
242 }
243
244 /**
245   * pm8001_scan_start - we should enable all HBA phys by sending the phy_start
246   * command to HBA.
247   * @shost: the scsi host data.
248   */
249 void pm8001_scan_start(struct Scsi_Host *shost)
250 {
251         int i;
252         struct pm8001_hba_info *pm8001_ha;
253         struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
254         pm8001_ha = sha->lldd_ha;
255         /* SAS_RE_INITIALIZATION not available in SPCv/ve */
256         if (pm8001_ha->chip_id == chip_8001)
257                 PM8001_CHIP_DISP->sas_re_init_req(pm8001_ha);
258         for (i = 0; i < pm8001_ha->chip->n_phy; ++i)
259                 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
260 }
261
262 int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time)
263 {
264         struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
265
266         /* give the phy enabling interrupt event time to come in (1s
267         * is empirically about all it takes) */
268         if (time < HZ)
269                 return 0;
270         /* Wait for discovery to finish */
271         sas_drain_work(ha);
272         return 1;
273 }
274
275 /**
276   * pm8001_task_prep_smp - the dispatcher function, prepare data for smp task
277   * @pm8001_ha: our hba card information
278   * @ccb: the ccb which attached to smp task
279   */
280 static int pm8001_task_prep_smp(struct pm8001_hba_info *pm8001_ha,
281         struct pm8001_ccb_info *ccb)
282 {
283         return PM8001_CHIP_DISP->smp_req(pm8001_ha, ccb);
284 }
285
286 u32 pm8001_get_ncq_tag(struct sas_task *task, u32 *tag)
287 {
288         struct ata_queued_cmd *qc = task->uldd_task;
289         if (qc) {
290                 if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
291                         qc->tf.command == ATA_CMD_FPDMA_READ) {
292                         *tag = qc->tag;
293                         return 1;
294                 }
295         }
296         return 0;
297 }
298
299 /**
300   * pm8001_task_prep_ata - the dispatcher function, prepare data for sata task
301   * @pm8001_ha: our hba card information
302   * @ccb: the ccb which attached to sata task
303   */
304 static int pm8001_task_prep_ata(struct pm8001_hba_info *pm8001_ha,
305         struct pm8001_ccb_info *ccb)
306 {
307         return PM8001_CHIP_DISP->sata_req(pm8001_ha, ccb);
308 }
309
310 /**
311   * pm8001_task_prep_ssp_tm - the dispatcher function, prepare task management data
312   * @pm8001_ha: our hba card information
313   * @ccb: the ccb which attached to TM
314   * @tmf: the task management IU
315   */
316 static int pm8001_task_prep_ssp_tm(struct pm8001_hba_info *pm8001_ha,
317         struct pm8001_ccb_info *ccb, struct pm8001_tmf_task *tmf)
318 {
319         return PM8001_CHIP_DISP->ssp_tm_req(pm8001_ha, ccb, tmf);
320 }
321
322 /**
323   * pm8001_task_prep_ssp - the dispatcher function,prepare ssp data for ssp task
324   * @pm8001_ha: our hba card information
325   * @ccb: the ccb which attached to ssp task
326   */
327 static int pm8001_task_prep_ssp(struct pm8001_hba_info *pm8001_ha,
328         struct pm8001_ccb_info *ccb)
329 {
330         return PM8001_CHIP_DISP->ssp_io_req(pm8001_ha, ccb);
331 }
332
333  /* Find the local port id that's attached to this device */
334 static int sas_find_local_port_id(struct domain_device *dev)
335 {
336         struct domain_device *pdev = dev->parent;
337
338         /* Directly attached device */
339         if (!pdev)
340                 return dev->port->id;
341         while (pdev) {
342                 struct domain_device *pdev_p = pdev->parent;
343                 if (!pdev_p)
344                         return pdev->port->id;
345                 pdev = pdev->parent;
346         }
347         return 0;
348 }
349
350 /**
351   * pm8001_task_exec - queue the task(ssp, smp && ata) to the hardware.
352   * @task: the task to be execute.
353   * @num: if can_queue great than 1, the task can be queued up. for SMP task,
354   * we always execute one one time.
355   * @gfp_flags: gfp_flags.
356   * @is_tmf: if it is task management task.
357   * @tmf: the task management IU
358   */
359 #define DEV_IS_GONE(pm8001_dev) \
360         ((!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED)))
361 static int pm8001_task_exec(struct sas_task *task, const int num,
362         gfp_t gfp_flags, int is_tmf, struct pm8001_tmf_task *tmf)
363 {
364         struct domain_device *dev = task->dev;
365         struct pm8001_hba_info *pm8001_ha;
366         struct pm8001_device *pm8001_dev;
367         struct pm8001_port *port = NULL;
368         struct sas_task *t = task;
369         struct pm8001_ccb_info *ccb;
370         u32 tag = 0xdeadbeef, rc, n_elem = 0;
371         u32 n = num;
372         unsigned long flags = 0;
373
374         if (!dev->port) {
375                 struct task_status_struct *tsm = &t->task_status;
376                 tsm->resp = SAS_TASK_UNDELIVERED;
377                 tsm->stat = SAS_PHY_DOWN;
378                 if (dev->dev_type != SAS_SATA_DEV)
379                         t->task_done(t);
380                 return 0;
381         }
382         pm8001_ha = pm8001_find_ha_by_dev(task->dev);
383         PM8001_IO_DBG(pm8001_ha, pm8001_printk("pm8001_task_exec device \n "));
384         spin_lock_irqsave(&pm8001_ha->lock, flags);
385         do {
386                 dev = t->dev;
387                 pm8001_dev = dev->lldd_dev;
388                 port = &pm8001_ha->port[sas_find_local_port_id(dev)];
389                 if (DEV_IS_GONE(pm8001_dev) || !port->port_attached) {
390                         if (sas_protocol_ata(t->task_proto)) {
391                                 struct task_status_struct *ts = &t->task_status;
392                                 ts->resp = SAS_TASK_UNDELIVERED;
393                                 ts->stat = SAS_PHY_DOWN;
394
395                                 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
396                                 t->task_done(t);
397                                 spin_lock_irqsave(&pm8001_ha->lock, flags);
398                                 if (n > 1)
399                                         t = list_entry(t->list.next,
400                                                         struct sas_task, list);
401                                 continue;
402                         } else {
403                                 struct task_status_struct *ts = &t->task_status;
404                                 ts->resp = SAS_TASK_UNDELIVERED;
405                                 ts->stat = SAS_PHY_DOWN;
406                                 t->task_done(t);
407                                 if (n > 1)
408                                         t = list_entry(t->list.next,
409                                                         struct sas_task, list);
410                                 continue;
411                         }
412                 }
413                 rc = pm8001_tag_alloc(pm8001_ha, &tag);
414                 if (rc)
415                         goto err_out;
416                 ccb = &pm8001_ha->ccb_info[tag];
417
418                 if (!sas_protocol_ata(t->task_proto)) {
419                         if (t->num_scatter) {
420                                 n_elem = dma_map_sg(pm8001_ha->dev,
421                                         t->scatter,
422                                         t->num_scatter,
423                                         t->data_dir);
424                                 if (!n_elem) {
425                                         rc = -ENOMEM;
426                                         goto err_out_tag;
427                                 }
428                         }
429                 } else {
430                         n_elem = t->num_scatter;
431                 }
432
433                 t->lldd_task = ccb;
434                 ccb->n_elem = n_elem;
435                 ccb->ccb_tag = tag;
436                 ccb->task = t;
437                 switch (t->task_proto) {
438                 case SAS_PROTOCOL_SMP:
439                         rc = pm8001_task_prep_smp(pm8001_ha, ccb);
440                         break;
441                 case SAS_PROTOCOL_SSP:
442                         if (is_tmf)
443                                 rc = pm8001_task_prep_ssp_tm(pm8001_ha,
444                                         ccb, tmf);
445                         else
446                                 rc = pm8001_task_prep_ssp(pm8001_ha, ccb);
447                         break;
448                 case SAS_PROTOCOL_SATA:
449                 case SAS_PROTOCOL_STP:
450                         rc = pm8001_task_prep_ata(pm8001_ha, ccb);
451                         break;
452                 default:
453                         dev_printk(KERN_ERR, pm8001_ha->dev,
454                                 "unknown sas_task proto: 0x%x\n",
455                                 t->task_proto);
456                         rc = -EINVAL;
457                         break;
458                 }
459
460                 if (rc) {
461                         PM8001_IO_DBG(pm8001_ha,
462                                 pm8001_printk("rc is %x\n", rc));
463                         goto err_out_tag;
464                 }
465                 /* TODO: select normal or high priority */
466                 spin_lock(&t->task_state_lock);
467                 t->task_state_flags |= SAS_TASK_AT_INITIATOR;
468                 spin_unlock(&t->task_state_lock);
469                 pm8001_dev->running_req++;
470                 if (n > 1)
471                         t = list_entry(t->list.next, struct sas_task, list);
472         } while (--n);
473         rc = 0;
474         goto out_done;
475
476 err_out_tag:
477         pm8001_tag_free(pm8001_ha, tag);
478 err_out:
479         dev_printk(KERN_ERR, pm8001_ha->dev, "pm8001 exec failed[%d]!\n", rc);
480         if (!sas_protocol_ata(t->task_proto))
481                 if (n_elem)
482                         dma_unmap_sg(pm8001_ha->dev, t->scatter, n_elem,
483                                 t->data_dir);
484 out_done:
485         spin_unlock_irqrestore(&pm8001_ha->lock, flags);
486         return rc;
487 }
488
489 /**
490   * pm8001_queue_command - register for upper layer used, all IO commands sent
491   * to HBA are from this interface.
492   * @task: the task to be execute.
493   * @num: if can_queue great than 1, the task can be queued up. for SMP task,
494   * we always execute one one time
495   * @gfp_flags: gfp_flags
496   */
497 int pm8001_queue_command(struct sas_task *task, const int num,
498                 gfp_t gfp_flags)
499 {
500         return pm8001_task_exec(task, num, gfp_flags, 0, NULL);
501 }
502
503 void pm8001_ccb_free(struct pm8001_hba_info *pm8001_ha, u32 ccb_idx)
504 {
505         pm8001_tag_clear(pm8001_ha, ccb_idx);
506 }
507
508 /**
509   * pm8001_ccb_task_free - free the sg for ssp and smp command, free the ccb.
510   * @pm8001_ha: our hba card information
511   * @ccb: the ccb which attached to ssp task
512   * @task: the task to be free.
513   * @ccb_idx: ccb index.
514   */
515 void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha,
516         struct sas_task *task, struct pm8001_ccb_info *ccb, u32 ccb_idx)
517 {
518         if (!ccb->task)
519                 return;
520         if (!sas_protocol_ata(task->task_proto))
521                 if (ccb->n_elem)
522                         dma_unmap_sg(pm8001_ha->dev, task->scatter,
523                                 task->num_scatter, task->data_dir);
524
525         switch (task->task_proto) {
526         case SAS_PROTOCOL_SMP:
527                 dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_resp, 1,
528                         PCI_DMA_FROMDEVICE);
529                 dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_req, 1,
530                         PCI_DMA_TODEVICE);
531                 break;
532
533         case SAS_PROTOCOL_SATA:
534         case SAS_PROTOCOL_STP:
535         case SAS_PROTOCOL_SSP:
536         default:
537                 /* do nothing */
538                 break;
539         }
540         task->lldd_task = NULL;
541         ccb->task = NULL;
542         ccb->ccb_tag = 0xFFFFFFFF;
543         ccb->open_retry = 0;
544         pm8001_ccb_free(pm8001_ha, ccb_idx);
545 }
546
547  /**
548   * pm8001_alloc_dev - find a empty pm8001_device
549   * @pm8001_ha: our hba card information
550   */
551 struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha)
552 {
553         u32 dev;
554         for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
555                 if (pm8001_ha->devices[dev].dev_type == SAS_PHY_UNUSED) {
556                         pm8001_ha->devices[dev].id = dev;
557                         return &pm8001_ha->devices[dev];
558                 }
559         }
560         if (dev == PM8001_MAX_DEVICES) {
561                 PM8001_FAIL_DBG(pm8001_ha,
562                         pm8001_printk("max support %d devices, ignore ..\n",
563                         PM8001_MAX_DEVICES));
564         }
565         return NULL;
566 }
567 /**
568   * pm8001_find_dev - find a matching pm8001_device
569   * @pm8001_ha: our hba card information
570   */
571 struct pm8001_device *pm8001_find_dev(struct pm8001_hba_info *pm8001_ha,
572                                         u32 device_id)
573 {
574         u32 dev;
575         for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
576                 if (pm8001_ha->devices[dev].device_id == device_id)
577                         return &pm8001_ha->devices[dev];
578         }
579         if (dev == PM8001_MAX_DEVICES) {
580                 PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("NO MATCHING "
581                                 "DEVICE FOUND !!!\n"));
582         }
583         return NULL;
584 }
585
586 static void pm8001_free_dev(struct pm8001_device *pm8001_dev)
587 {
588         u32 id = pm8001_dev->id;
589         memset(pm8001_dev, 0, sizeof(*pm8001_dev));
590         pm8001_dev->id = id;
591         pm8001_dev->dev_type = SAS_PHY_UNUSED;
592         pm8001_dev->device_id = PM8001_MAX_DEVICES;
593         pm8001_dev->sas_device = NULL;
594 }
595
596 /**
597   * pm8001_dev_found_notify - libsas notify a device is found.
598   * @dev: the device structure which sas layer used.
599   *
600   * when libsas find a sas domain device, it should tell the LLDD that
601   * device is found, and then LLDD register this device to HBA firmware
602   * by the command "OPC_INB_REG_DEV", after that the HBA will assign a
603   * device ID(according to device's sas address) and returned it to LLDD. From
604   * now on, we communicate with HBA FW with the device ID which HBA assigned
605   * rather than sas address. it is the necessary step for our HBA but it is
606   * the optional for other HBA driver.
607   */
608 static int pm8001_dev_found_notify(struct domain_device *dev)
609 {
610         unsigned long flags = 0;
611         int res = 0;
612         struct pm8001_hba_info *pm8001_ha = NULL;
613         struct domain_device *parent_dev = dev->parent;
614         struct pm8001_device *pm8001_device;
615         DECLARE_COMPLETION_ONSTACK(completion);
616         u32 flag = 0;
617         pm8001_ha = pm8001_find_ha_by_dev(dev);
618         spin_lock_irqsave(&pm8001_ha->lock, flags);
619
620         pm8001_device = pm8001_alloc_dev(pm8001_ha);
621         if (!pm8001_device) {
622                 res = -1;
623                 goto found_out;
624         }
625         pm8001_device->sas_device = dev;
626         dev->lldd_dev = pm8001_device;
627         pm8001_device->dev_type = dev->dev_type;
628         pm8001_device->dcompletion = &completion;
629         if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) {
630                 int phy_id;
631                 struct ex_phy *phy;
632                 for (phy_id = 0; phy_id < parent_dev->ex_dev.num_phys;
633                 phy_id++) {
634                         phy = &parent_dev->ex_dev.ex_phy[phy_id];
635                         if (SAS_ADDR(phy->attached_sas_addr)
636                                 == SAS_ADDR(dev->sas_addr)) {
637                                 pm8001_device->attached_phy = phy_id;
638                                 break;
639                         }
640                 }
641                 if (phy_id == parent_dev->ex_dev.num_phys) {
642                         PM8001_FAIL_DBG(pm8001_ha,
643                         pm8001_printk("Error: no attached dev:%016llx"
644                         " at ex:%016llx.\n", SAS_ADDR(dev->sas_addr),
645                                 SAS_ADDR(parent_dev->sas_addr)));
646                         res = -1;
647                 }
648         } else {
649                 if (dev->dev_type == SAS_SATA_DEV) {
650                         pm8001_device->attached_phy =
651                                 dev->rphy->identify.phy_identifier;
652                                 flag = 1; /* directly sata*/
653                 }
654         } /*register this device to HBA*/
655         PM8001_DISC_DBG(pm8001_ha, pm8001_printk("Found device\n"));
656         PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag);
657         spin_unlock_irqrestore(&pm8001_ha->lock, flags);
658         wait_for_completion(&completion);
659         if (dev->dev_type == SAS_END_DEVICE)
660                 msleep(50);
661         pm8001_ha->flags = PM8001F_RUN_TIME;
662         return 0;
663 found_out:
664         spin_unlock_irqrestore(&pm8001_ha->lock, flags);
665         return res;
666 }
667
668 int pm8001_dev_found(struct domain_device *dev)
669 {
670         return pm8001_dev_found_notify(dev);
671 }
672
673 void pm8001_task_done(struct sas_task *task)
674 {
675         if (!del_timer(&task->slow_task->timer))
676                 return;
677         complete(&task->slow_task->completion);
678 }
679
680 static void pm8001_tmf_timedout(unsigned long data)
681 {
682         struct sas_task *task = (struct sas_task *)data;
683
684         task->task_state_flags |= SAS_TASK_STATE_ABORTED;
685         complete(&task->slow_task->completion);
686 }
687
688 #define PM8001_TASK_TIMEOUT 20
689 /**
690   * pm8001_exec_internal_tmf_task - execute some task management commands.
691   * @dev: the wanted device.
692   * @tmf: which task management wanted to be take.
693   * @para_len: para_len.
694   * @parameter: ssp task parameter.
695   *
696   * when errors or exception happened, we may want to do something, for example
697   * abort the issued task which result in this execption, it is done by calling
698   * this function, note it is also with the task execute interface.
699   */
700 static int pm8001_exec_internal_tmf_task(struct domain_device *dev,
701         void *parameter, u32 para_len, struct pm8001_tmf_task *tmf)
702 {
703         int res, retry;
704         struct sas_task *task = NULL;
705         struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
706         struct pm8001_device *pm8001_dev = dev->lldd_dev;
707         DECLARE_COMPLETION_ONSTACK(completion_setstate);
708
709         for (retry = 0; retry < 3; retry++) {
710                 task = sas_alloc_slow_task(GFP_KERNEL);
711                 if (!task)
712                         return -ENOMEM;
713
714                 task->dev = dev;
715                 task->task_proto = dev->tproto;
716                 memcpy(&task->ssp_task, parameter, para_len);
717                 task->task_done = pm8001_task_done;
718                 task->slow_task->timer.data = (unsigned long)task;
719                 task->slow_task->timer.function = pm8001_tmf_timedout;
720                 task->slow_task->timer.expires = jiffies + PM8001_TASK_TIMEOUT*HZ;
721                 add_timer(&task->slow_task->timer);
722
723                 res = pm8001_task_exec(task, 1, GFP_KERNEL, 1, tmf);
724
725                 if (res) {
726                         del_timer(&task->slow_task->timer);
727                         PM8001_FAIL_DBG(pm8001_ha,
728                                 pm8001_printk("Executing internal task "
729                                 "failed\n"));
730                         goto ex_err;
731                 }
732                 wait_for_completion(&task->slow_task->completion);
733                 if (pm8001_ha->chip_id != chip_8001) {
734                         pm8001_dev->setds_completion = &completion_setstate;
735                                 PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
736                                         pm8001_dev, 0x01);
737                         wait_for_completion(&completion_setstate);
738                 }
739                 res = -TMF_RESP_FUNC_FAILED;
740                 /* Even TMF timed out, return direct. */
741                 if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
742                         if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
743                                 PM8001_FAIL_DBG(pm8001_ha,
744                                         pm8001_printk("TMF task[%x]timeout.\n",
745                                         tmf->tmf));
746                                 goto ex_err;
747                         }
748                 }
749
750                 if (task->task_status.resp == SAS_TASK_COMPLETE &&
751                         task->task_status.stat == SAM_STAT_GOOD) {
752                         res = TMF_RESP_FUNC_COMPLETE;
753                         break;
754                 }
755
756                 if (task->task_status.resp == SAS_TASK_COMPLETE &&
757                 task->task_status.stat == SAS_DATA_UNDERRUN) {
758                         /* no error, but return the number of bytes of
759                         * underrun */
760                         res = task->task_status.residual;
761                         break;
762                 }
763
764                 if (task->task_status.resp == SAS_TASK_COMPLETE &&
765                         task->task_status.stat == SAS_DATA_OVERRUN) {
766                         PM8001_FAIL_DBG(pm8001_ha,
767                                 pm8001_printk("Blocked task error.\n"));
768                         res = -EMSGSIZE;
769                         break;
770                 } else {
771                         PM8001_EH_DBG(pm8001_ha,
772                                 pm8001_printk(" Task to dev %016llx response:"
773                                 "0x%x status 0x%x\n",
774                                 SAS_ADDR(dev->sas_addr),
775                                 task->task_status.resp,
776                                 task->task_status.stat));
777                         sas_free_task(task);
778                         task = NULL;
779                 }
780         }
781 ex_err:
782         BUG_ON(retry == 3 && task != NULL);
783         sas_free_task(task);
784         return res;
785 }
786
787 static int
788 pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha,
789         struct pm8001_device *pm8001_dev, struct domain_device *dev, u32 flag,
790         u32 task_tag)
791 {
792         int res, retry;
793         u32 ccb_tag;
794         struct pm8001_ccb_info *ccb;
795         struct sas_task *task = NULL;
796
797         for (retry = 0; retry < 3; retry++) {
798                 task = sas_alloc_slow_task(GFP_KERNEL);
799                 if (!task)
800                         return -ENOMEM;
801
802                 task->dev = dev;
803                 task->task_proto = dev->tproto;
804                 task->task_done = pm8001_task_done;
805                 task->slow_task->timer.data = (unsigned long)task;
806                 task->slow_task->timer.function = pm8001_tmf_timedout;
807                 task->slow_task->timer.expires = jiffies + PM8001_TASK_TIMEOUT * HZ;
808                 add_timer(&task->slow_task->timer);
809
810                 res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
811                 if (res)
812                         return res;
813                 ccb = &pm8001_ha->ccb_info[ccb_tag];
814                 ccb->device = pm8001_dev;
815                 ccb->ccb_tag = ccb_tag;
816                 ccb->task = task;
817
818                 res = PM8001_CHIP_DISP->task_abort(pm8001_ha,
819                         pm8001_dev, flag, task_tag, ccb_tag);
820
821                 if (res) {
822                         del_timer(&task->slow_task->timer);
823                         PM8001_FAIL_DBG(pm8001_ha,
824                                 pm8001_printk("Executing internal task "
825                                 "failed\n"));
826                         goto ex_err;
827                 }
828                 wait_for_completion(&task->slow_task->completion);
829                 res = TMF_RESP_FUNC_FAILED;
830                 /* Even TMF timed out, return direct. */
831                 if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
832                         if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
833                                 PM8001_FAIL_DBG(pm8001_ha,
834                                         pm8001_printk("TMF task timeout.\n"));
835                                 goto ex_err;
836                         }
837                 }
838
839                 if (task->task_status.resp == SAS_TASK_COMPLETE &&
840                         task->task_status.stat == SAM_STAT_GOOD) {
841                         res = TMF_RESP_FUNC_COMPLETE;
842                         break;
843
844                 } else {
845                         PM8001_EH_DBG(pm8001_ha,
846                                 pm8001_printk(" Task to dev %016llx response: "
847                                         "0x%x status 0x%x\n",
848                                 SAS_ADDR(dev->sas_addr),
849                                 task->task_status.resp,
850                                 task->task_status.stat));
851                         sas_free_task(task);
852                         task = NULL;
853                 }
854         }
855 ex_err:
856         BUG_ON(retry == 3 && task != NULL);
857         sas_free_task(task);
858         return res;
859 }
860
861 /**
862   * pm8001_dev_gone_notify - see the comments for "pm8001_dev_found_notify"
863   * @dev: the device structure which sas layer used.
864   */
865 static void pm8001_dev_gone_notify(struct domain_device *dev)
866 {
867         unsigned long flags = 0;
868         u32 tag;
869         struct pm8001_hba_info *pm8001_ha;
870         struct pm8001_device *pm8001_dev = dev->lldd_dev;
871
872         pm8001_ha = pm8001_find_ha_by_dev(dev);
873         spin_lock_irqsave(&pm8001_ha->lock, flags);
874         pm8001_tag_alloc(pm8001_ha, &tag);
875         if (pm8001_dev) {
876                 u32 device_id = pm8001_dev->device_id;
877
878                 PM8001_DISC_DBG(pm8001_ha,
879                         pm8001_printk("found dev[%d:%x] is gone.\n",
880                         pm8001_dev->device_id, pm8001_dev->dev_type));
881                 if (pm8001_dev->running_req) {
882                         spin_unlock_irqrestore(&pm8001_ha->lock, flags);
883                         pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
884                                 dev, 1, 0);
885                         spin_lock_irqsave(&pm8001_ha->lock, flags);
886                 }
887                 PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id);
888                 pm8001_free_dev(pm8001_dev);
889         } else {
890                 PM8001_DISC_DBG(pm8001_ha,
891                         pm8001_printk("Found dev has gone.\n"));
892         }
893         dev->lldd_dev = NULL;
894         spin_unlock_irqrestore(&pm8001_ha->lock, flags);
895 }
896
897 void pm8001_dev_gone(struct domain_device *dev)
898 {
899         pm8001_dev_gone_notify(dev);
900 }
901
902 static int pm8001_issue_ssp_tmf(struct domain_device *dev,
903         u8 *lun, struct pm8001_tmf_task *tmf)
904 {
905         struct sas_ssp_task ssp_task;
906         if (!(dev->tproto & SAS_PROTOCOL_SSP))
907                 return TMF_RESP_FUNC_ESUPP;
908
909         strncpy((u8 *)&ssp_task.LUN, lun, 8);
910         return pm8001_exec_internal_tmf_task(dev, &ssp_task, sizeof(ssp_task),
911                 tmf);
912 }
913
914 /* retry commands by ha, by task and/or by device */
915 void pm8001_open_reject_retry(
916         struct pm8001_hba_info *pm8001_ha,
917         struct sas_task *task_to_close,
918         struct pm8001_device *device_to_close)
919 {
920         int i;
921         unsigned long flags;
922
923         if (pm8001_ha == NULL)
924                 return;
925
926         spin_lock_irqsave(&pm8001_ha->lock, flags);
927
928         for (i = 0; i < PM8001_MAX_CCB; i++) {
929                 struct sas_task *task;
930                 struct task_status_struct *ts;
931                 struct pm8001_device *pm8001_dev;
932                 unsigned long flags1;
933                 u32 tag;
934                 struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[i];
935
936                 pm8001_dev = ccb->device;
937                 if (!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED))
938                         continue;
939                 if (!device_to_close) {
940                         uintptr_t d = (uintptr_t)pm8001_dev
941                                         - (uintptr_t)&pm8001_ha->devices;
942                         if (((d % sizeof(*pm8001_dev)) != 0)
943                          || ((d / sizeof(*pm8001_dev)) >= PM8001_MAX_DEVICES))
944                                 continue;
945                 } else if (pm8001_dev != device_to_close)
946                         continue;
947                 tag = ccb->ccb_tag;
948                 if (!tag || (tag == 0xFFFFFFFF))
949                         continue;
950                 task = ccb->task;
951                 if (!task || !task->task_done)
952                         continue;
953                 if (task_to_close && (task != task_to_close))
954                         continue;
955                 ts = &task->task_status;
956                 ts->resp = SAS_TASK_COMPLETE;
957                 /* Force the midlayer to retry */
958                 ts->stat = SAS_OPEN_REJECT;
959                 ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
960                 if (pm8001_dev)
961                         pm8001_dev->running_req--;
962                 spin_lock_irqsave(&task->task_state_lock, flags1);
963                 task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
964                 task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
965                 task->task_state_flags |= SAS_TASK_STATE_DONE;
966                 if (unlikely((task->task_state_flags
967                                 & SAS_TASK_STATE_ABORTED))) {
968                         spin_unlock_irqrestore(&task->task_state_lock,
969                                 flags1);
970                         pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
971                 } else {
972                         spin_unlock_irqrestore(&task->task_state_lock,
973                                 flags1);
974                         pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
975                         mb();/* in order to force CPU ordering */
976                         spin_unlock_irqrestore(&pm8001_ha->lock, flags);
977                         task->task_done(task);
978                         spin_lock_irqsave(&pm8001_ha->lock, flags);
979                 }
980         }
981
982         spin_unlock_irqrestore(&pm8001_ha->lock, flags);
983 }
984
985 /**
986   * Standard mandates link reset for ATA  (type 0) and hard reset for
987   * SSP (type 1) , only for RECOVERY
988   */
989 int pm8001_I_T_nexus_reset(struct domain_device *dev)
990 {
991         int rc = TMF_RESP_FUNC_FAILED;
992         struct pm8001_device *pm8001_dev;
993         struct pm8001_hba_info *pm8001_ha;
994         struct sas_phy *phy;
995
996         if (!dev || !dev->lldd_dev)
997                 return -ENODEV;
998
999         pm8001_dev = dev->lldd_dev;
1000         pm8001_ha = pm8001_find_ha_by_dev(dev);
1001         phy = sas_get_local_phy(dev);
1002
1003         if (dev_is_sata(dev)) {
1004                 DECLARE_COMPLETION_ONSTACK(completion_setstate);
1005                 if (scsi_is_sas_phy_local(phy)) {
1006                         rc = 0;
1007                         goto out;
1008                 }
1009                 rc = sas_phy_reset(phy, 1);
1010                 msleep(2000);
1011                 rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
1012                         dev, 1, 0);
1013                 pm8001_dev->setds_completion = &completion_setstate;
1014                 rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
1015                         pm8001_dev, 0x01);
1016                 wait_for_completion(&completion_setstate);
1017         } else {
1018                 rc = sas_phy_reset(phy, 1);
1019                 msleep(2000);
1020         }
1021         PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n",
1022                 pm8001_dev->device_id, rc));
1023  out:
1024         sas_put_local_phy(phy);
1025         return rc;
1026 }
1027
1028 /*
1029 * This function handle the IT_NEXUS_XXX event or completion
1030 * status code for SSP/SATA/SMP I/O request.
1031 */
1032 int pm8001_I_T_nexus_event_handler(struct domain_device *dev)
1033 {
1034         int rc = TMF_RESP_FUNC_FAILED;
1035         struct pm8001_device *pm8001_dev;
1036         struct pm8001_hba_info *pm8001_ha;
1037         struct sas_phy *phy;
1038         u32 device_id = 0;
1039
1040         if (!dev || !dev->lldd_dev)
1041                 return -1;
1042
1043         pm8001_dev = dev->lldd_dev;
1044         device_id = pm8001_dev->device_id;
1045         pm8001_ha = pm8001_find_ha_by_dev(dev);
1046
1047         PM8001_EH_DBG(pm8001_ha,
1048                         pm8001_printk("I_T_Nexus handler invoked !!"));
1049
1050         phy = sas_get_local_phy(dev);
1051
1052         if (dev_is_sata(dev)) {
1053                 DECLARE_COMPLETION_ONSTACK(completion_setstate);
1054                 if (scsi_is_sas_phy_local(phy)) {
1055                         rc = 0;
1056                         goto out;
1057                 }
1058                 /* send internal ssp/sata/smp abort command to FW */
1059                 rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
1060                                                         dev, 1, 0);
1061                 msleep(100);
1062
1063                 /* deregister the target device */
1064                 pm8001_dev_gone_notify(dev);
1065                 msleep(200);
1066
1067                 /*send phy reset to hard reset target */
1068                 rc = sas_phy_reset(phy, 1);
1069                 msleep(2000);
1070                 pm8001_dev->setds_completion = &completion_setstate;
1071
1072                 wait_for_completion(&completion_setstate);
1073         } else {
1074                 /* send internal ssp/sata/smp abort command to FW */
1075                 rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
1076                                                         dev, 1, 0);
1077                 msleep(100);
1078
1079                 /* deregister the target device */
1080                 pm8001_dev_gone_notify(dev);
1081                 msleep(200);
1082
1083                 /*send phy reset to hard reset target */
1084                 rc = sas_phy_reset(phy, 1);
1085                 msleep(2000);
1086         }
1087         PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n",
1088                 pm8001_dev->device_id, rc));
1089 out:
1090         sas_put_local_phy(phy);
1091
1092         return rc;
1093 }
1094 /* mandatory SAM-3, the task reset the specified LUN*/
1095 int pm8001_lu_reset(struct domain_device *dev, u8 *lun)
1096 {
1097         int rc = TMF_RESP_FUNC_FAILED;
1098         struct pm8001_tmf_task tmf_task;
1099         struct pm8001_device *pm8001_dev = dev->lldd_dev;
1100         struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
1101         DECLARE_COMPLETION_ONSTACK(completion_setstate);
1102         if (dev_is_sata(dev)) {
1103                 struct sas_phy *phy = sas_get_local_phy(dev);
1104                 rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
1105                         dev, 1, 0);
1106                 rc = sas_phy_reset(phy, 1);
1107                 sas_put_local_phy(phy);
1108                 pm8001_dev->setds_completion = &completion_setstate;
1109                 rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
1110                         pm8001_dev, 0x01);
1111                 wait_for_completion(&completion_setstate);
1112         } else {
1113                 tmf_task.tmf = TMF_LU_RESET;
1114                 rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
1115         }
1116         /* If failed, fall-through I_T_Nexus reset */
1117         PM8001_EH_DBG(pm8001_ha, pm8001_printk("for device[%x]:rc=%d\n",
1118                 pm8001_dev->device_id, rc));
1119         return rc;
1120 }
1121
1122 /* optional SAM-3 */
1123 int pm8001_query_task(struct sas_task *task)
1124 {
1125         u32 tag = 0xdeadbeef;
1126         int i = 0;
1127         struct scsi_lun lun;
1128         struct pm8001_tmf_task tmf_task;
1129         int rc = TMF_RESP_FUNC_FAILED;
1130         if (unlikely(!task || !task->lldd_task || !task->dev))
1131                 return rc;
1132
1133         if (task->task_proto & SAS_PROTOCOL_SSP) {
1134                 struct scsi_cmnd *cmnd = task->uldd_task;
1135                 struct domain_device *dev = task->dev;
1136                 struct pm8001_hba_info *pm8001_ha =
1137                         pm8001_find_ha_by_dev(dev);
1138
1139                 int_to_scsilun(cmnd->device->lun, &lun);
1140                 rc = pm8001_find_tag(task, &tag);
1141                 if (rc == 0) {
1142                         rc = TMF_RESP_FUNC_FAILED;
1143                         return rc;
1144                 }
1145                 PM8001_EH_DBG(pm8001_ha, pm8001_printk("Query:["));
1146                 for (i = 0; i < 16; i++)
1147                         printk(KERN_INFO "%02x ", cmnd->cmnd[i]);
1148                 printk(KERN_INFO "]\n");
1149                 tmf_task.tmf =  TMF_QUERY_TASK;
1150                 tmf_task.tag_of_task_to_be_managed = tag;
1151
1152                 rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
1153                 switch (rc) {
1154                 /* The task is still in Lun, release it then */
1155                 case TMF_RESP_FUNC_SUCC:
1156                         PM8001_EH_DBG(pm8001_ha,
1157                                 pm8001_printk("The task is still in Lun\n"));
1158                         break;
1159                 /* The task is not in Lun or failed, reset the phy */
1160                 case TMF_RESP_FUNC_FAILED:
1161                 case TMF_RESP_FUNC_COMPLETE:
1162                         PM8001_EH_DBG(pm8001_ha,
1163                         pm8001_printk("The task is not in Lun or failed,"
1164                         " reset the phy\n"));
1165                         break;
1166                 }
1167         }
1168         pm8001_printk(":rc= %d\n", rc);
1169         return rc;
1170 }
1171
1172 /*  mandatory SAM-3, still need free task/ccb info, abord the specified task */
1173 int pm8001_abort_task(struct sas_task *task)
1174 {
1175         unsigned long flags;
1176         u32 tag = 0xdeadbeef;
1177         u32 device_id;
1178         struct domain_device *dev ;
1179         struct pm8001_hba_info *pm8001_ha = NULL;
1180         struct pm8001_ccb_info *ccb;
1181         struct scsi_lun lun;
1182         struct pm8001_device *pm8001_dev;
1183         struct pm8001_tmf_task tmf_task;
1184         int rc = TMF_RESP_FUNC_FAILED;
1185         if (unlikely(!task || !task->lldd_task || !task->dev))
1186                 return rc;
1187         spin_lock_irqsave(&task->task_state_lock, flags);
1188         if (task->task_state_flags & SAS_TASK_STATE_DONE) {
1189                 spin_unlock_irqrestore(&task->task_state_lock, flags);
1190                 rc = TMF_RESP_FUNC_COMPLETE;
1191                 goto out;
1192         }
1193         spin_unlock_irqrestore(&task->task_state_lock, flags);
1194         if (task->task_proto & SAS_PROTOCOL_SSP) {
1195                 struct scsi_cmnd *cmnd = task->uldd_task;
1196                 dev = task->dev;
1197                 ccb = task->lldd_task;
1198                 pm8001_dev = dev->lldd_dev;
1199                 pm8001_ha = pm8001_find_ha_by_dev(dev);
1200                 int_to_scsilun(cmnd->device->lun, &lun);
1201                 rc = pm8001_find_tag(task, &tag);
1202                 if (rc == 0) {
1203                         printk(KERN_INFO "No such tag in %s\n", __func__);
1204                         rc = TMF_RESP_FUNC_FAILED;
1205                         return rc;
1206                 }
1207                 device_id = pm8001_dev->device_id;
1208                 PM8001_EH_DBG(pm8001_ha,
1209                         pm8001_printk("abort io to deviceid= %d\n", device_id));
1210                 tmf_task.tmf = TMF_ABORT_TASK;
1211                 tmf_task.tag_of_task_to_be_managed = tag;
1212                 rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
1213                 pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
1214                         pm8001_dev->sas_device, 0, tag);
1215         } else if (task->task_proto & SAS_PROTOCOL_SATA ||
1216                 task->task_proto & SAS_PROTOCOL_STP) {
1217                 dev = task->dev;
1218                 pm8001_dev = dev->lldd_dev;
1219                 pm8001_ha = pm8001_find_ha_by_dev(dev);
1220                 rc = pm8001_find_tag(task, &tag);
1221                 if (rc == 0) {
1222                         printk(KERN_INFO "No such tag in %s\n", __func__);
1223                         rc = TMF_RESP_FUNC_FAILED;
1224                         return rc;
1225                 }
1226                 rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
1227                         pm8001_dev->sas_device, 0, tag);
1228         } else if (task->task_proto & SAS_PROTOCOL_SMP) {
1229                 /* SMP */
1230                 dev = task->dev;
1231                 pm8001_dev = dev->lldd_dev;
1232                 pm8001_ha = pm8001_find_ha_by_dev(dev);
1233                 rc = pm8001_find_tag(task, &tag);
1234                 if (rc == 0) {
1235                         printk(KERN_INFO "No such tag in %s\n", __func__);
1236                         rc = TMF_RESP_FUNC_FAILED;
1237                         return rc;
1238                 }
1239                 rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
1240                         pm8001_dev->sas_device, 0, tag);
1241
1242         }
1243 out:
1244         if (rc != TMF_RESP_FUNC_COMPLETE)
1245                 pm8001_printk("rc= %d\n", rc);
1246         return rc;
1247 }
1248
1249 int pm8001_abort_task_set(struct domain_device *dev, u8 *lun)
1250 {
1251         int rc = TMF_RESP_FUNC_FAILED;
1252         struct pm8001_tmf_task tmf_task;
1253
1254         tmf_task.tmf = TMF_ABORT_TASK_SET;
1255         rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
1256         return rc;
1257 }
1258
1259 int pm8001_clear_aca(struct domain_device *dev, u8 *lun)
1260 {
1261         int rc = TMF_RESP_FUNC_FAILED;
1262         struct pm8001_tmf_task tmf_task;
1263
1264         tmf_task.tmf = TMF_CLEAR_ACA;
1265         rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
1266
1267         return rc;
1268 }
1269
1270 int pm8001_clear_task_set(struct domain_device *dev, u8 *lun)
1271 {
1272         int rc = TMF_RESP_FUNC_FAILED;
1273         struct pm8001_tmf_task tmf_task;
1274         struct pm8001_device *pm8001_dev = dev->lldd_dev;
1275         struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
1276
1277         PM8001_EH_DBG(pm8001_ha,
1278                 pm8001_printk("I_T_L_Q clear task set[%x]\n",
1279                 pm8001_dev->device_id));
1280         tmf_task.tmf = TMF_CLEAR_TASK_SET;
1281         rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
1282         return rc;
1283 }
1284