drivers/pci/hotplug/cpqphp_ctrl.c

   1 /*
   2  * Compaq Hot Plug Controller Driver
   3  *
   4  * Copyright (C) 1995,2001 Compaq Computer Corporation
   5  * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
   6  * Copyright (C) 2001 IBM Corp.
   7  *
   8  * All rights reserved.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2 of the License, or (at
  13  * your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful, but
  16  * WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
  18  * NON INFRINGEMENT.  See the GNU General Public License for more
  19  * details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; if not, write to the Free Software
  23  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  24  *
  25  * Send feedback to <greg@kroah.com>
  26  *
  27  */
  28
  29 #include <linux/module.h>
  30 #include <linux/kernel.h>
  31 #include <linux/types.h>
  32 #include <linux/slab.h>
  33 #include <linux/workqueue.h>
  34 #include <linux/interrupt.h>
  35 #include <linux/delay.h>
  36 #include <linux/wait.h>
  37 #include <linux/pci.h>
  38 #include <linux/pci_hotplug.h>
  39 #include <linux/kthread.h>
  40 #include "cpqphp.h"
  41
  42 static u32 configure_new_device(struct controller* ctrl, struct pci_func *func,
  43                         u8 behind_bridge, struct resource_lists *resources);
  44 static int configure_new_function(struct controller* ctrl, struct pci_func *func,
  45                         u8 behind_bridge, struct resource_lists *resources);
  46 static void interrupt_event_handler(struct controller *ctrl);
  47
  48
  49 static struct task_struct *cpqhp_event_thread;
  50 static unsigned long pushbutton_pending;        /* = 0 */
  51
  52 /* delay is in jiffies to wait for */
  53 static void long_delay(int delay)
  54 {
  55         /*
  56          * XXX(hch): if someone is bored please convert all callers
  57          * to call msleep_interruptible directly.  They really want
  58          * to specify timeouts in natural units and spend a lot of
  59          * effort converting them to jiffies..
  60          */
  61         msleep_interruptible(jiffies_to_msecs(delay));
  62 }
  63
  64
  65 /* FIXME: The following line needs to be somewhere else... */
  66 #define WRONG_BUS_FREQUENCY 0x07
  67 static u8 handle_switch_change(u8 change, struct controller * ctrl)
  68 {
  69         int hp_slot;
  70         u8 rc = 0;
  71         u16 temp_word;
  72         struct pci_func *func;
  73         struct event_info *taskInfo;
  74
  75         if (!change)
  76                 return 0;
  77
  78         /* Switch Change */
  79         dbg("cpqsbd:  Switch interrupt received.\n");
  80
  81         for (hp_slot = 0; hp_slot < 6; hp_slot++) {
  82                 if (change & (0x1L << hp_slot)) {
  83                         /*
  84                          * this one changed.
  85                          */
  86                         func = cpqhp_slot_find(ctrl->bus,
  87                                 (hp_slot + ctrl->slot_device_offset), 0);
  88
  89                         /* this is the structure that tells the worker thread
  90                          * what to do
  91                          */
  92                         taskInfo = &(ctrl->event_queue[ctrl->next_event]);
  93                         ctrl->next_event = (ctrl->next_event + 1) % 10;
  94                         taskInfo->hp_slot = hp_slot;
  95
  96                         rc++;
  97
  98                         temp_word = ctrl->ctrl_int_comp >> 16;
  99                         func->presence_save = (temp_word >> hp_slot) & 0x01;
 100                         func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
 101
 102                         if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) {
 103                                 /*
 104                                  * Switch opened
 105                                  */
 106
 107                                 func->switch_save = 0;
 108
 109                                 taskInfo->event_type = INT_SWITCH_OPEN;
 110                         } else {
 111                                 /*
 112                                  * Switch closed
 113                                  */
 114
 115                                 func->switch_save = 0x10;
 116
 117                                 taskInfo->event_type = INT_SWITCH_CLOSE;
 118                         }
 119                 }
 120         }
 121
 122         return rc;
 123 }
 124
 125 /**
 126  * cpqhp_find_slot - find the struct slot of given device
 127  * @ctrl: scan lots of this controller
 128  * @device: the device id to find
 129  */
 130 static struct slot *cpqhp_find_slot(struct controller *ctrl, u8 device)
 131 {
 132         struct slot *slot = ctrl->slot;
 133
 134         while (slot && (slot->device != device))
 135                 slot = slot->next;
 136
 137         return slot;
 138 }
 139
 140
 141 static u8 handle_presence_change(u16 change, struct controller * ctrl)
 142 {
 143         int hp_slot;
 144         u8 rc = 0;
 145         u8 temp_byte;
 146         u16 temp_word;
 147         struct pci_func *func;
 148         struct event_info *taskInfo;
 149         struct slot *p_slot;
 150
 151         if (!change)
 152                 return 0;
 153
 154         /*
 155          * Presence Change
 156          */
 157         dbg("cpqsbd:  Presence/Notify input change.\n");
 158         dbg("         Changed bits are 0x%4.4x\n", change );
 159
 160         for (hp_slot = 0; hp_slot < 6; hp_slot++) {
 161                 if (change & (0x0101 << hp_slot)) {
 162                         /*
 163                          * this one changed.
 164                          */
 165                         func = cpqhp_slot_find(ctrl->bus,
 166                                 (hp_slot + ctrl->slot_device_offset), 0);
 167
 168                         taskInfo = &(ctrl->event_queue[ctrl->next_event]);
 169                         ctrl->next_event = (ctrl->next_event + 1) % 10;
 170                         taskInfo->hp_slot = hp_slot;
 171
 172                         rc++;
 173
 174                         p_slot = cpqhp_find_slot(ctrl, hp_slot + (readb(ctrl->hpc_reg + SLOT_MASK) >> 4));
 175                         if (!p_slot)
 176                                 return 0;
 177
 178                         /* If the switch closed, must be a button
 179                          * If not in button mode, nevermind
 180                          */
 181                         if (func->switch_save && (ctrl->push_button == 1)) {
 182                                 temp_word = ctrl->ctrl_int_comp >> 16;
 183                                 temp_byte = (temp_word >> hp_slot) & 0x01;
 184                                 temp_byte |= (temp_word >> (hp_slot + 7)) & 0x02;
 185
 186                                 if (temp_byte != func->presence_save) {
 187                                         /*
 188                                          * button Pressed (doesn't do anything)
 189                                          */
 190                                         dbg("hp_slot %d button pressed\n", hp_slot);
 191                                         taskInfo->event_type = INT_BUTTON_PRESS;
 192                                 } else {
 193                                         /*
 194                                          * button Released - TAKE ACTION!!!!
 195                                          */
 196                                         dbg("hp_slot %d button released\n", hp_slot);
 197                                         taskInfo->event_type = INT_BUTTON_RELEASE;
 198
 199                                         /* Cancel if we are still blinking */
 200                                         if ((p_slot->state == BLINKINGON_STATE)
 201                                             || (p_slot->state == BLINKINGOFF_STATE)) {
 202                                                 taskInfo->event_type = INT_BUTTON_CANCEL;
 203                                                 dbg("hp_slot %d button cancel\n", hp_slot);
 204                                         } else if ((p_slot->state == POWERON_STATE)
 205                                                    || (p_slot->state == POWEROFF_STATE)) {
 206                                                 /* info(msg_button_ignore, p_slot->number); */
 207                                                 taskInfo->event_type = INT_BUTTON_IGNORE;
 208                                                 dbg("hp_slot %d button ignore\n", hp_slot);
 209                                         }
 210                                 }
 211                         } else {
 212                                 /* Switch is open, assume a presence change
 213                                  * Save the presence state
 214                                  */
 215                                 temp_word = ctrl->ctrl_int_comp >> 16;
 216                                 func->presence_save = (temp_word >> hp_slot) & 0x01;
 217                                 func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
 218
 219                                 if ((!(ctrl->ctrl_int_comp & (0x010000 << hp_slot))) ||
 220                                     (!(ctrl->ctrl_int_comp & (0x01000000 << hp_slot)))) {
 221                                         /* Present */
 222                                         taskInfo->event_type = INT_PRESENCE_ON;
 223                                 } else {
 224                                         /* Not Present */
 225                                         taskInfo->event_type = INT_PRESENCE_OFF;
 226                                 }
 227                         }
 228                 }
 229         }
 230
 231         return rc;
 232 }
 233
 234
 235 static u8 handle_power_fault(u8 change, struct controller * ctrl)
 236 {
 237         int hp_slot;
 238         u8 rc = 0;
 239         struct pci_func *func;
 240         struct event_info *taskInfo;
 241
 242         if (!change)
 243                 return 0;
 244
 245         /*
 246          * power fault
 247          */
 248
 249         info("power fault interrupt\n");
 250
 251         for (hp_slot = 0; hp_slot < 6; hp_slot++) {
 252                 if (change & (0x01 << hp_slot)) {
 253                         /*
 254                          * this one changed.
 255                          */
 256                         func = cpqhp_slot_find(ctrl->bus,
 257                                 (hp_slot + ctrl->slot_device_offset), 0);
 258
 259                         taskInfo = &(ctrl->event_queue[ctrl->next_event]);
 260                         ctrl->next_event = (ctrl->next_event + 1) % 10;
 261                         taskInfo->hp_slot = hp_slot;
 262
 263                         rc++;
 264
 265                         if (ctrl->ctrl_int_comp & (0x00000100 << hp_slot)) {
 266                                 /*
 267                                  * power fault Cleared
 268                                  */
 269                                 func->status = 0x00;
 270
 271                                 taskInfo->event_type = INT_POWER_FAULT_CLEAR;
 272                         } else {
 273                                 /*
 274                                  * power fault
 275                                  */
 276                                 taskInfo->event_type = INT_POWER_FAULT;
 277
 278                                 if (ctrl->rev < 4) {
 279                                         amber_LED_on (ctrl, hp_slot);
 280                                         green_LED_off (ctrl, hp_slot);
 281                                         set_SOGO (ctrl);
 282
 283                                         /* this is a fatal condition, we want
 284                                          * to crash the machine to protect from
 285                                          * data corruption. simulated_NMI
 286                                          * shouldn't ever return */
 287                                         /* FIXME
 288                                         simulated_NMI(hp_slot, ctrl); */
 289
 290                                         /* The following code causes a software
 291                                          * crash just in case simulated_NMI did
 292                                          * return */
 293                                         /*FIXME
 294                                         panic(msg_power_fault); */
 295                                 } else {
 296                                         /* set power fault status for this board */
 297                                         func->status = 0xFF;
 298                                         info("power fault bit %x set\n", hp_slot);
 299                                 }
 300                         }
 301                 }
 302         }
 303
 304         return rc;
 305 }
 306
 307
 308 /**
 309  * sort_by_size - sort nodes on the list by their length, smallest first.
 310  * @head: list to sort
 311  */
 312 static int sort_by_size(struct pci_resource **head)
 313 {
 314         struct pci_resource *current_res;
 315         struct pci_resource *next_res;
 316         int out_of_order = 1;
 317
 318         if (!(*head))
 319                 return 1;
 320
 321         if (!((*head)->next))
 322                 return 0;
 323
 324         while (out_of_order) {
 325                 out_of_order = 0;
 326
 327                 /* Special case for swapping list head */
 328                 if (((*head)->next) &&
 329                     ((*head)->length > (*head)->next->length)) {
 330                         out_of_order++;
 331                         current_res = *head;
 332                         *head = (*head)->next;
 333                         current_res->next = (*head)->next;
 334                         (*head)->next = current_res;
 335                 }
 336
 337                 current_res = *head;
 338
 339                 while (current_res->next && current_res->next->next) {
 340                         if (current_res->next->length > current_res->next->next->length) {
 341                                 out_of_order++;
 342                                 next_res = current_res->next;
 343                                 current_res->next = current_res->next->next;
 344                                 current_res = current_res->next;
 345                                 next_res->next = current_res->next;
 346                                 current_res->next = next_res;
 347                         } else
 348                                 current_res = current_res->next;
 349                 }
 350         }  /* End of out_of_order loop */
 351
 352         return 0;
 353 }
 354
 355
 356 /**
 357  * sort_by_max_size - sort nodes on the list by their length, largest first.
 358  * @head: list to sort
 359  */
 360 static int sort_by_max_size(struct pci_resource **head)
 361 {
 362         struct pci_resource *current_res;
 363         struct pci_resource *next_res;
 364         int out_of_order = 1;
 365
 366         if (!(*head))
 367                 return 1;
 368
 369         if (!((*head)->next))
 370                 return 0;
 371
 372         while (out_of_order) {
 373                 out_of_order = 0;
 374
 375                 /* Special case for swapping list head */
 376                 if (((*head)->next) &&
 377                     ((*head)->length < (*head)->next->length)) {
 378                         out_of_order++;
 379                         current_res = *head;
 380                         *head = (*head)->next;
 381                         current_res->next = (*head)->next;
 382                         (*head)->next = current_res;
 383                 }
 384
 385                 current_res = *head;
 386
 387                 while (current_res->next && current_res->next->next) {
 388                         if (current_res->next->length < current_res->next->next->length) {
 389                                 out_of_order++;
 390                                 next_res = current_res->next;
 391                                 current_res->next = current_res->next->next;
 392                                 current_res = current_res->next;
 393                                 next_res->next = current_res->next;
 394                                 current_res->next = next_res;
 395                         } else
 396                                 current_res = current_res->next;
 397                 }
 398         }  /* End of out_of_order loop */
 399
 400         return 0;
 401 }
 402
 403
 404 /**
 405  * do_pre_bridge_resource_split - find node of resources that are unused
 406  * @head: new list head
 407  * @orig_head: original list head
 408  * @alignment: max node size (?)
 409  */
 410 static struct pci_resource *do_pre_bridge_resource_split(struct pci_resource **head,
 411                                 struct pci_resource **orig_head, u32 alignment)
 412 {
 413         struct pci_resource *prevnode = NULL;
 414         struct pci_resource *node;
 415         struct pci_resource *split_node;
 416         u32 rc;
 417         u32 temp_dword;
 418         dbg("do_pre_bridge_resource_split\n");
 419
 420         if (!(*head) || !(*orig_head))
 421                 return NULL;
 422
 423         rc = cpqhp_resource_sort_and_combine(head);
 424
 425         if (rc)
 426                 return NULL;
 427
 428         if ((*head)->base != (*orig_head)->base)
 429                 return NULL;
 430
 431         if ((*head)->length == (*orig_head)->length)
 432                 return NULL;
 433
 434
 435         /* If we got here, there the bridge requires some of the resource, but
 436          * we may be able to split some off of the front
 437          */
 438
 439         node = *head;
 440
 441         if (node->length & (alignment -1)) {
 442                 /* this one isn't an aligned length, so we'll make a new entry
 443                  * and split it up.
 444                  */
 445                 split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
 446
 447                 if (!split_node)
 448                         return NULL;
 449
 450                 temp_dword = (node->length | (alignment-1)) + 1 - alignment;
 451
 452                 split_node->base = node->base;
 453                 split_node->length = temp_dword;
 454
 455                 node->length -= temp_dword;
 456                 node->base += split_node->length;
 457
 458                 /* Put it in the list */
 459                 *head = split_node;
 460                 split_node->next = node;
 461         }
 462
 463         if (node->length < alignment)
 464                 return NULL;
 465
 466         /* Now unlink it */
 467         if (*head == node) {
 468                 *head = node->next;
 469         } else {
 470                 prevnode = *head;
 471                 while (prevnode->next != node)
 472                         prevnode = prevnode->next;
 473
 474                 prevnode->next = node->next;
 475         }
 476         node->next = NULL;
 477
 478         return node;
 479 }
 480
 481
 482 /**
 483  * do_bridge_resource_split - find one node of resources that aren't in use
 484  * @head: list head
 485  * @alignment: max node size (?)
 486  */
 487 static struct pci_resource *do_bridge_resource_split(struct pci_resource **head, u32 alignment)
 488 {
 489         struct pci_resource *prevnode = NULL;
 490         struct pci_resource *node;
 491         u32 rc;
 492         u32 temp_dword;
 493
 494         rc = cpqhp_resource_sort_and_combine(head);
 495
 496         if (rc)
 497                 return NULL;
 498
 499         node = *head;
 500
 501         while (node->next) {
 502                 prevnode = node;
 503                 node = node->next;
 504                 kfree(prevnode);
 505         }
 506
 507         if (node->length < alignment)
 508                 goto error;
 509
 510         if (node->base & (alignment - 1)) {
 511                 /* Short circuit if adjusted size is too small */
 512                 temp_dword = (node->base | (alignment-1)) + 1;
 513                 if ((node->length - (temp_dword - node->base)) < alignment)
 514                         goto error;
 515
 516                 node->length -= (temp_dword - node->base);
 517                 node->base = temp_dword;
 518         }
 519
 520         if (node->length & (alignment - 1))
 521                 /* There's stuff in use after this node */
 522                 goto error;
 523
 524         return node;
 525 error:
 526         kfree(node);
 527         return NULL;
 528 }
 529
 530
 531 /**
 532  * get_io_resource - find first node of given size not in ISA aliasing window.
 533  * @head: list to search
 534  * @size: size of node to find, must be a power of two.
 535  *
 536  * Description: This function sorts the resource list by size and then returns
 537  * returns the first node of "size" length that is not in the ISA aliasing
 538  * window.  If it finds a node larger than "size" it will split it up.
 539  */
 540 static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size)
 541 {
 542         struct pci_resource *prevnode;
 543         struct pci_resource *node;
 544         struct pci_resource *split_node;
 545         u32 temp_dword;
 546
 547         if (!(*head))
 548                 return NULL;
 549
 550         if (cpqhp_resource_sort_and_combine(head))
 551                 return NULL;
 552
 553         if (sort_by_size(head))
 554                 return NULL;
 555
 556         for (node = *head; node; node = node->next) {
 557                 if (node->length < size)
 558                         continue;
 559
 560                 if (node->base & (size - 1)) {
 561                         /* this one isn't base aligned properly
 562                          * so we'll make a new entry and split it up
 563                          */
 564                         temp_dword = (node->base | (size-1)) + 1;
 565
 566                         /* Short circuit if adjusted size is too small */
 567                         if ((node->length - (temp_dword - node->base)) < size)
 568                                 continue;
 569
 570                         split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
 571
 572                         if (!split_node)
 573                                 return NULL;
 574
 575                         split_node->base = node->base;
 576                         split_node->length = temp_dword - node->base;
 577                         node->base = temp_dword;
 578                         node->length -= split_node->length;
 579
 580                         /* Put it in the list */
 581                         split_node->next = node->next;
 582                         node->next = split_node;
 583                 } /* End of non-aligned base */
 584
 585                 /* Don't need to check if too small since we already did */
 586                 if (node->length > size) {
 587                         /* this one is longer than we need
 588                          * so we'll make a new entry and split it up
 589                          */
 590                         split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
 591
 592                         if (!split_node)
 593                                 return NULL;
 594
 595                         split_node->base = node->base + size;
 596                         split_node->length = node->length - size;
 597                         node->length = size;
 598
 599                         /* Put it in the list */
 600                         split_node->next = node->next;
 601                         node->next = split_node;
 602                 }  /* End of too big on top end */
 603
 604                 /* For IO make sure it's not in the ISA aliasing space */
 605                 if (node->base & 0x300L)
 606                         continue;
 607
 608                 /* If we got here, then it is the right size
 609                  * Now take it out of the list and break
 610                  */
 611                 if (*head == node) {
 612                         *head = node->next;
 613                 } else {
 614                         prevnode = *head;
 615                         while (prevnode->next != node)
 616                                 prevnode = prevnode->next;
 617
 618                         prevnode->next = node->next;
 619                 }
 620                 node->next = NULL;
 621                 break;
 622         }
 623
 624         return node;
 625 }
 626
 627
 628 /**
 629  * get_max_resource - get largest node which has at least the given size.
 630  * @head: the list to search the node in
 631  * @size: the minimum size of the node to find
 632  *
 633  * Description: Gets the largest node that is at least "size" big from the
 634  * list pointed to by head.  It aligns the node on top and bottom
 635  * to "size" alignment before returning it.
 636  */
 637 static struct pci_resource *get_max_resource(struct pci_resource **head, u32 size)
 638 {
 639         struct pci_resource *max;
 640         struct pci_resource *temp;
 641         struct pci_resource *split_node;
 642         u32 temp_dword;
 643
 644         if (cpqhp_resource_sort_and_combine(head))
 645                 return NULL;
 646
 647         if (sort_by_max_size(head))
 648                 return NULL;
 649
 650         for (max = *head; max; max = max->next) {
 651                 /* If not big enough we could probably just bail,
 652                  * instead we'll continue to the next.
 653                  */
 654                 if (max->length < size)
 655                         continue;
 656
 657                 if (max->base & (size - 1)) {
 658                         /* this one isn't base aligned properly
 659                          * so we'll make a new entry and split it up
 660                          */
 661                         temp_dword = (max->base | (size-1)) + 1;
 662
 663                         /* Short circuit if adjusted size is too small */
 664                         if ((max->length - (temp_dword - max->base)) < size)
 665                                 continue;
 666
 667                         split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
 668
 669                         if (!split_node)
 670                                 return NULL;
 671
 672                         split_node->base = max->base;
 673                         split_node->length = temp_dword - max->base;
 674                         max->base = temp_dword;
 675                         max->length -= split_node->length;
 676
 677                         split_node->next = max->next;
 678                         max->next = split_node;
 679                 }
 680
 681                 if ((max->base + max->length) & (size - 1)) {
 682                         /* this one isn't end aligned properly at the top
 683                          * so we'll make a new entry and split it up
 684                          */
 685                         split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
 686
 687                         if (!split_node)
 688                                 return NULL;
 689                         temp_dword = ((max->base + max->length) & ~(size - 1));
 690                         split_node->base = temp_dword;
 691                         split_node->length = max->length + max->base
 692                                              - split_node->base;
 693                         max->length -= split_node->length;
 694
 695                         split_node->next = max->next;
 696                         max->next = split_node;
 697                 }
 698
 699                 /* Make sure it didn't shrink too much when we aligned it */
 700                 if (max->length < size)
 701                         continue;
 702
 703                 /* Now take it out of the list */
 704                 temp = *head;
 705                 if (temp == max) {
 706                         *head = max->next;
 707                 } else {
 708                         while (temp && temp->next != max) {
 709                                 temp = temp->next;
 710                         }
 711
 712                         temp->next = max->next;
 713                 }
 714
 715                 max->next = NULL;
 716                 break;
 717         }
 718
 719         return max;
 720 }
 721
 722
 723 /**
 724  * get_resource - find resource of given size and split up larger ones.
 725  * @head: the list to search for resources
 726  * @size: the size limit to use
 727  *
 728  * Description: This function sorts the resource list by size and then
 729  * returns the first node of "size" length.  If it finds a node
 730  * larger than "size" it will split it up.
 731  *
 732  * size must be a power of two.
 733  */
 734 static struct pci_resource *get_resource(struct pci_resource **head, u32 size)
 735 {
 736         struct pci_resource *prevnode;
 737         struct pci_resource *node;
 738         struct pci_resource *split_node;
 739         u32 temp_dword;
 740
 741         if (cpqhp_resource_sort_and_combine(head))
 742                 return NULL;
 743
 744         if (sort_by_size(head))
 745                 return NULL;
 746
 747         for (node = *head; node; node = node->next) {
 748                 dbg("%s: req_size =%x node=%p, base=%x, length=%x\n",
 749                     __func__, size, node, node->base, node->length);
 750                 if (node->length < size)
 751                         continue;
 752
 753                 if (node->base & (size - 1)) {
 754                         dbg("%s: not aligned\n", __func__);
 755                         /* this one isn't base aligned properly
 756                          * so we'll make a new entry and split it up
 757                          */
 758                         temp_dword = (node->base | (size-1)) + 1;
 759
 760                         /* Short circuit if adjusted size is too small */
 761                         if ((node->length - (temp_dword - node->base)) < size)
 762                                 continue;
 763
 764                         split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
 765
 766                         if (!split_node)
 767                                 return NULL;
 768
 769                         split_node->base = node->base;
 770                         split_node->length = temp_dword - node->base;
 771                         node->base = temp_dword;
 772                         node->length -= split_node->length;
 773
 774                         split_node->next = node->next;
 775                         node->next = split_node;
 776                 } /* End of non-aligned base */
 777
 778                 /* Don't need to check if too small since we already did */
 779                 if (node->length > size) {
 780                         dbg("%s: too big\n", __func__);
 781                         /* this one is longer than we need
 782                          * so we'll make a new entry and split it up
 783                          */
 784                         split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
 785
 786                         if (!split_node)
 787                                 return NULL;
 788
 789                         split_node->base = node->base + size;
 790                         split_node->length = node->length - size;
 791                         node->length = size;
 792
 793                         /* Put it in the list */
 794                         split_node->next = node->next;
 795                         node->next = split_node;
 796                 }  /* End of too big on top end */
 797
 798                 dbg("%s: got one!!!\n", __func__);
 799                 /* If we got here, then it is the right size
 800                  * Now take it out of the list */
 801                 if (*head == node) {
 802                         *head = node->next;
 803                 } else {
 804                         prevnode = *head;
 805                         while (prevnode->next != node)
 806                                 prevnode = prevnode->next;
 807
 808                         prevnode->next = node->next;
 809                 }
 810                 node->next = NULL;
 811                 break;
 812         }
 813         return node;
 814 }
 815
 816
 817 /**
 818  * cpqhp_resource_sort_and_combine - sort nodes by base addresses and clean up
 819  * @head: the list to sort and clean up
 820  *
 821  * Description: Sorts all of the nodes in the list in ascending order by
 822  * their base addresses.  Also does garbage collection by
 823  * combining adjacent nodes.
 824  *
 825  * Returns %0 if success.
 826  */
 827 int cpqhp_resource_sort_and_combine(struct pci_resource **head)
 828 {
 829         struct pci_resource *node1;
 830         struct pci_resource *node2;
 831         int out_of_order = 1;
 832
 833         dbg("%s: head = %p, *head = %p\n", __func__, head, *head);
 834
 835         if (!(*head))
 836                 return 1;
 837
 838         dbg("*head->next = %p\n",(*head)->next);
 839
 840         if (!(*head)->next)
 841                 return 0;       /* only one item on the list, already sorted! */
 842
 843         dbg("*head->base = 0x%x\n",(*head)->base);
 844         dbg("*head->next->base = 0x%x\n",(*head)->next->base);
 845         while (out_of_order) {
 846                 out_of_order = 0;
 847
 848                 /* Special case for swapping list head */
 849                 if (((*head)->next) &&
 850                     ((*head)->base > (*head)->next->base)) {
 851                         node1 = *head;
 852                         (*head) = (*head)->next;
 853                         node1->next = (*head)->next;
 854                         (*head)->next = node1;
 855                         out_of_order++;
 856                 }
 857
 858                 node1 = (*head);
 859
 860                 while (node1->next && node1->next->next) {
 861                         if (node1->next->base > node1->next->next->base) {
 862                                 out_of_order++;
 863                                 node2 = node1->next;
 864                                 node1->next = node1->next->next;
 865                                 node1 = node1->next;
 866                                 node2->next = node1->next;
 867                                 node1->next = node2;
 868                         } else
 869                                 node1 = node1->next;
 870                 }
 871         }  /* End of out_of_order loop */
 872
 873         node1 = *head;
 874
 875         while (node1 && node1->next) {
 876                 if ((node1->base + node1->length) == node1->next->base) {
 877                         /* Combine */
 878                         dbg("8..\n");
 879                         node1->length += node1->next->length;
 880                         node2 = node1->next;
 881                         node1->next = node1->next->next;
 882                         kfree(node2);
 883                 } else
 884                         node1 = node1->next;
 885         }
 886
 887         return 0;
 888 }
 889
 890
 891 irqreturn_t cpqhp_ctrl_intr(int IRQ, void *data)
 892 {
 893         struct controller *ctrl = data;
 894         u8 schedule_flag = 0;
 895         u8 reset;
 896         u16 misc;
 897         u32 Diff;
 898         u32 temp_dword;
 899
 900
 901         misc = readw(ctrl->hpc_reg + MISC);
 902         /*
 903          * Check to see if it was our interrupt
 904          */
 905         if (!(misc & 0x000C)) {
 906                 return IRQ_NONE;
 907         }
 908
 909         if (misc & 0x0004) {
 910                 /*
 911                  * Serial Output interrupt Pending
 912                  */
 913
 914                 /* Clear the interrupt */
 915                 misc |= 0x0004;
 916                 writew(misc, ctrl->hpc_reg + MISC);
 917
 918                 /* Read to clear posted writes */
 919                 misc = readw(ctrl->hpc_reg + MISC);
 920
 921                 dbg ("%s - waking up\n", __func__);
 922                 wake_up_interruptible(&ctrl->queue);
 923         }
 924
 925         if (misc & 0x0008) {
 926                 /* General-interrupt-input interrupt Pending */
 927                 Diff = readl(ctrl->hpc_reg + INT_INPUT_CLEAR) ^ ctrl->ctrl_int_comp;
 928
 929                 ctrl->ctrl_int_comp = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
 930
 931                 /* Clear the interrupt */
 932                 writel(Diff, ctrl->hpc_reg + INT_INPUT_CLEAR);
 933
 934                 /* Read it back to clear any posted writes */
 935                 temp_dword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
 936
 937                 if (!Diff)
 938                         /* Clear all interrupts */
 939                         writel(0xFFFFFFFF, ctrl->hpc_reg + INT_INPUT_CLEAR);
 940
 941                 schedule_flag += handle_switch_change((u8)(Diff & 0xFFL), ctrl);
 942                 schedule_flag += handle_presence_change((u16)((Diff & 0xFFFF0000L) >> 16), ctrl);
 943                 schedule_flag += handle_power_fault((u8)((Diff & 0xFF00L) >> 8), ctrl);
 944         }
 945
 946         reset = readb(ctrl->hpc_reg + RESET_FREQ_MODE);
 947         if (reset & 0x40) {
 948                 /* Bus reset has completed */
 949                 reset &= 0xCF;
 950                 writeb(reset, ctrl->hpc_reg + RESET_FREQ_MODE);
 951                 reset = readb(ctrl->hpc_reg + RESET_FREQ_MODE);
 952                 wake_up_interruptible(&ctrl->queue);
 953         }
 954
 955         if (schedule_flag) {
 956                 wake_up_process(cpqhp_event_thread);
 957                 dbg("Waking even thread");
 958         }
 959         return IRQ_HANDLED;
 960 }
 961
 962
 963 /**
 964  * cpqhp_slot_create - Creates a node and adds it to the proper bus.
 965  * @busnumber: bus where new node is to be located
 966  *
 967  * Returns pointer to the new node or %NULL if unsuccessful.
 968  */
 969 struct pci_func *cpqhp_slot_create(u8 busnumber)
 970 {
 971         struct pci_func *new_slot;
 972         struct pci_func *next;
 973
 974         new_slot = kzalloc(sizeof(*new_slot), GFP_KERNEL);
 975         if (new_slot == NULL)
 976                 return new_slot;
 977
 978         new_slot->next = NULL;
 979         new_slot->configured = 1;
 980
 981         if (cpqhp_slot_list[busnumber] == NULL) {
 982                 cpqhp_slot_list[busnumber] = new_slot;
 983         } else {
 984                 next = cpqhp_slot_list[busnumber];
 985                 while (next->next != NULL)
 986                         next = next->next;
 987                 next->next = new_slot;
 988         }
 989         return new_slot;
 990 }
 991
 992
 993 /**
 994  * slot_remove - Removes a node from the linked list of slots.
 995  * @old_slot: slot to remove
 996  *
 997  * Returns %0 if successful, !0 otherwise.
 998  */
 999 static int slot_remove(struct pci_func * old_slot)
1000 {
1001         struct pci_func *next;
1002
1003         if (old_slot == NULL)
1004                 return 1;
1005
1006         next = cpqhp_slot_list[old_slot->bus];
1007         if (next == NULL)
1008                 return 1;
1009
1010         if (next == old_slot) {
1011                 cpqhp_slot_list[old_slot->bus] = old_slot->next;
1012                 cpqhp_destroy_board_resources(old_slot);
1013                 kfree(old_slot);
1014                 return 0;
1015         }
1016
1017         while ((next->next != old_slot) && (next->next != NULL))
1018                 next = next->next;
1019
1020         if (next->next == old_slot) {
1021                 next->next = old_slot->next;
1022                 cpqhp_destroy_board_resources(old_slot);
1023                 kfree(old_slot);
1024                 return 0;
1025         } else
1026                 return 2;
1027 }
1028
1029
1030 /**
1031  * bridge_slot_remove - Removes a node from the linked list of slots.
1032  * @bridge: bridge to remove
1033  *
1034  * Returns %0 if successful, !0 otherwise.
1035  */
1036 static int bridge_slot_remove(struct pci_func *bridge)
1037 {
1038         u8 subordinateBus, secondaryBus;
1039         u8 tempBus;
1040         struct pci_func *next;
1041
1042         secondaryBus = (bridge->config_space[0x06] >> 8) & 0xFF;
1043         subordinateBus = (bridge->config_space[0x06] >> 16) & 0xFF;
1044
1045         for (tempBus = secondaryBus; tempBus <= subordinateBus; tempBus++) {
1046                 next = cpqhp_slot_list[tempBus];
1047
1048                 while (!slot_remove(next))
1049                         next = cpqhp_slot_list[tempBus];
1050         }
1051
1052         next = cpqhp_slot_list[bridge->bus];
1053
1054         if (next == NULL)
1055                 return 1;
1056
1057         if (next == bridge) {
1058                 cpqhp_slot_list[bridge->bus] = bridge->next;
1059                 goto out;
1060         }
1061
1062         while ((next->next != bridge) && (next->next != NULL))
1063                 next = next->next;
1064
1065         if (next->next != bridge)
1066                 return 2;
1067         next->next = bridge->next;
1068 out:
1069         kfree(bridge);
1070         return 0;
1071 }
1072
1073
1074 /**
1075  * cpqhp_slot_find - Looks for a node by bus, and device, multiple functions accessed
1076  * @bus: bus to find
1077  * @device: device to find
1078  * @index: is %0 for first function found, %1 for the second...
1079  *
1080  * Returns pointer to the node if successful, %NULL otherwise.
1081  */
1082 struct pci_func *cpqhp_slot_find(u8 bus, u8 device, u8 index)
1083 {
1084         int found = -1;
1085         struct pci_func *func;
1086
1087         func = cpqhp_slot_list[bus];
1088
1089         if ((func == NULL) || ((func->device == device) && (index == 0)))
1090                 return func;
1091
1092         if (func->device == device)
1093                 found++;
1094
1095         while (func->next != NULL) {
1096                 func = func->next;
1097
1098                 if (func->device == device)
1099                         found++;
1100
1101                 if (found == index)
1102                         return func;
1103         }
1104
1105         return NULL;
1106 }
1107
1108
1109 /* DJZ: I don't think is_bridge will work as is.
1110  * FIXME */
1111 static int is_bridge(struct pci_func * func)
1112 {
1113         /* Check the header type */
1114         if (((func->config_space[0x03] >> 16) & 0xFF) == 0x01)
1115                 return 1;
1116         else
1117                 return 0;
1118 }
1119
1120
1121 /**
1122  * set_controller_speed - set the frequency and/or mode of a specific controller segment.
1123  * @ctrl: controller to change frequency/mode for.
1124  * @adapter_speed: the speed of the adapter we want to match.
1125  * @hp_slot: the slot number where the adapter is installed.
1126  *
1127  * Returns %0 if we successfully change frequency and/or mode to match the
1128  * adapter speed.
1129  */
1130 static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_slot)
1131 {
1132         struct slot *slot;
1133         struct pci_bus *bus = ctrl->pci_bus;
1134         u8 reg;
1135         u8 slot_power = readb(ctrl->hpc_reg + SLOT_POWER);
1136         u16 reg16;
1137         u32 leds = readl(ctrl->hpc_reg + LED_CONTROL);
1138
1139         if (bus->cur_bus_speed == adapter_speed)
1140                 return 0;
1141
1142         /* We don't allow freq/mode changes if we find another adapter running
1143          * in another slot on this controller
1144          */
1145         for(slot = ctrl->slot; slot; slot = slot->next) {
1146                 if (slot->device == (hp_slot + ctrl->slot_device_offset))
1147                         continue;
1148                 if (!slot->hotplug_slot || !slot->hotplug_slot->info)
1149                         continue;
1150                 if (slot->hotplug_slot->info->adapter_status == 0)
1151                         continue;
1152                 /* If another adapter is running on the same segment but at a
1153                  * lower speed/mode, we allow the new adapter to function at
1154                  * this rate if supported
1155                  */
1156                 if (bus->cur_bus_speed < adapter_speed)
1157                         return 0;
1158
1159                 return 1;
1160         }
1161
1162         /* If the controller doesn't support freq/mode changes and the
1163          * controller is running at a higher mode, we bail
1164          */
1165         if ((bus->cur_bus_speed > adapter_speed) && (!ctrl->pcix_speed_capability))
1166                 return 1;
1167
1168         /* But we allow the adapter to run at a lower rate if possible */
1169         if ((bus->cur_bus_speed < adapter_speed) && (!ctrl->pcix_speed_capability))
1170                 return 0;
1171
1172         /* We try to set the max speed supported by both the adapter and
1173          * controller
1174          */
1175         if (bus->max_bus_speed < adapter_speed) {
1176                 if (bus->cur_bus_speed == bus->max_bus_speed)
1177                         return 0;
1178                 adapter_speed = bus->max_bus_speed;
1179         }
1180
1181         writel(0x0L, ctrl->hpc_reg + LED_CONTROL);
1182         writeb(0x00, ctrl->hpc_reg + SLOT_ENABLE);
1183
1184         set_SOGO(ctrl);
1185         wait_for_ctrl_irq(ctrl);
1186
1187         if (adapter_speed != PCI_SPEED_133MHz_PCIX)
1188                 reg = 0xF5;
1189         else
1190                 reg = 0xF4;
1191         pci_write_config_byte(ctrl->pci_dev, 0x41, reg);
1192
1193         reg16 = readw(ctrl->hpc_reg + NEXT_CURR_FREQ);
1194         reg16 &= ~0x000F;
1195         switch(adapter_speed) {
1196                 case(PCI_SPEED_133MHz_PCIX):
1197                         reg = 0x75;
1198                         reg16 |= 0xB;
1199                         break;
1200                 case(PCI_SPEED_100MHz_PCIX):
1201                         reg = 0x74;
1202                         reg16 |= 0xA;
1203                         break;
1204                 case(PCI_SPEED_66MHz_PCIX):
1205                         reg = 0x73;
1206                         reg16 |= 0x9;
1207                         break;
1208                 case(PCI_SPEED_66MHz):
1209                         reg = 0x73;
1210                         reg16 |= 0x1;
1211                         break;
1212                 default: /* 33MHz PCI 2.2 */
1213                         reg = 0x71;
1214                         break;
1215
1216         }
1217         reg16 |= 0xB << 12;
1218         writew(reg16, ctrl->hpc_reg + NEXT_CURR_FREQ);
1219
1220         mdelay(5);
1221
1222         /* Reenable interrupts */
1223         writel(0, ctrl->hpc_reg + INT_MASK);
1224
1225         pci_write_config_byte(ctrl->pci_dev, 0x41, reg);
1226
1227         /* Restart state machine */
1228         reg = ~0xF;
1229         pci_read_config_byte(ctrl->pci_dev, 0x43, &reg);
1230         pci_write_config_byte(ctrl->pci_dev, 0x43, reg);
1231
1232         /* Only if mode change...*/
1233         if (((bus->cur_bus_speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) ||
1234                 ((bus->cur_bus_speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz)))
1235                         set_SOGO(ctrl);
1236
1237         wait_for_ctrl_irq(ctrl);
1238         mdelay(1100);
1239
1240         /* Restore LED/Slot state */
1241         writel(leds, ctrl->hpc_reg + LED_CONTROL);
1242         writeb(slot_power, ctrl->hpc_reg + SLOT_ENABLE);
1243
1244         set_SOGO(ctrl);
1245         wait_for_ctrl_irq(ctrl);
1246
1247         bus->cur_bus_speed = adapter_speed;
1248         slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
1249
1250         info("Successfully changed frequency/mode for adapter in slot %d\n",
1251                         slot->number);
1252         return 0;
1253 }
1254
1255 /* the following routines constitute the bulk of the
1256  * hotplug controller logic
1257  */
1258
1259
1260 /**
1261  * board_replaced - Called after a board has been replaced in the system.
1262  * @func: PCI device/function information
1263  * @ctrl: hotplug controller
1264  *
1265  * This is only used if we don't have resources for hot add.
1266  * Turns power on for the board.
1267  * Checks to see if board is the same.
1268  * If board is same, reconfigures it.
1269  * If board isn't same, turns it back off.
1270  */
1271 static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
1272 {
1273         struct pci_bus *bus = ctrl->pci_bus;
1274         u8 hp_slot;
1275         u8 temp_byte;
1276         u8 adapter_speed;
1277         u32 rc = 0;
1278
1279         hp_slot = func->device - ctrl->slot_device_offset;
1280
1281         /*
1282          * The switch is open.
1283          */
1284         if (readl(ctrl->hpc_reg + INT_INPUT_CLEAR) & (0x01L << hp_slot))
1285                 rc = INTERLOCK_OPEN;
1286         /*
1287          * The board is already on
1288          */
1289         else if (is_slot_enabled (ctrl, hp_slot))
1290                 rc = CARD_FUNCTIONING;
1291         else {
1292                 mutex_lock(&ctrl->crit_sect);
1293
1294                 /* turn on board without attaching to the bus */
1295                 enable_slot_power (ctrl, hp_slot);
1296
1297                 set_SOGO(ctrl);
1298
1299                 /* Wait for SOBS to be unset */
1300                 wait_for_ctrl_irq (ctrl);
1301
1302                 /* Change bits in slot power register to force another shift out
1303                  * NOTE: this is to work around the timer bug */
1304                 temp_byte = readb(ctrl->hpc_reg + SLOT_POWER);
1305                 writeb(0x00, ctrl->hpc_reg + SLOT_POWER);
1306                 writeb(temp_byte, ctrl->hpc_reg + SLOT_POWER);
1307
1308                 set_SOGO(ctrl);
1309
1310                 /* Wait for SOBS to be unset */
1311                 wait_for_ctrl_irq (ctrl);
1312
1313                 adapter_speed = get_adapter_speed(ctrl, hp_slot);
1314                 if (bus->cur_bus_speed != adapter_speed)
1315                         if (set_controller_speed(ctrl, adapter_speed, hp_slot))
1316                                 rc = WRONG_BUS_FREQUENCY;
1317
1318                 /* turn off board without attaching to the bus */
1319                 disable_slot_power (ctrl, hp_slot);
1320
1321                 set_SOGO(ctrl);
1322
1323                 /* Wait for SOBS to be unset */
1324                 wait_for_ctrl_irq (ctrl);
1325
1326                 mutex_unlock(&ctrl->crit_sect);
1327
1328                 if (rc)
1329                         return rc;
1330
1331                 mutex_lock(&ctrl->crit_sect);
1332
1333                 slot_enable (ctrl, hp_slot);
1334                 green_LED_blink (ctrl, hp_slot);
1335
1336                 amber_LED_off (ctrl, hp_slot);
1337
1338                 set_SOGO(ctrl);
1339
1340                 /* Wait for SOBS to be unset */
1341                 wait_for_ctrl_irq (ctrl);
1342
1343                 mutex_unlock(&ctrl->crit_sect);
1344
1345                 /* Wait for ~1 second because of hot plug spec */
1346                 long_delay(1*HZ);
1347
1348                 /* Check for a power fault */
1349                 if (func->status == 0xFF) {
1350                         /* power fault occurred, but it was benign */
1351                         rc = POWER_FAILURE;
1352                         func->status = 0;
1353                 } else
1354                         rc = cpqhp_valid_replace(ctrl, func);
1355
1356                 if (!rc) {
1357                         /* It must be the same board */
1358
1359                         rc = cpqhp_configure_board(ctrl, func);
1360
1361                         /* If configuration fails, turn it off
1362                          * Get slot won't work for devices behind
1363                          * bridges, but in this case it will always be
1364                          * called for the "base" bus/dev/func of an
1365                          * adapter.
1366                          */
1367
1368                         mutex_lock(&ctrl->crit_sect);
1369
1370                         amber_LED_on (ctrl, hp_slot);
1371                         green_LED_off (ctrl, hp_slot);
1372                         slot_disable (ctrl, hp_slot);
1373
1374                         set_SOGO(ctrl);
1375
1376                         /* Wait for SOBS to be unset */
1377                         wait_for_ctrl_irq (ctrl);
1378
1379                         mutex_unlock(&ctrl->crit_sect);
1380
1381                         if (rc)
1382                                 return rc;
1383                         else
1384                                 return 1;
1385
1386                 } else {
1387                         /* Something is wrong
1388
1389                          * Get slot won't work for devices behind bridges, but
1390                          * in this case it will always be called for the "base"
1391                          * bus/dev/func of an adapter.
1392                          */
1393
1394                         mutex_lock(&ctrl->crit_sect);
1395
1396                         amber_LED_on (ctrl, hp_slot);
1397                         green_LED_off (ctrl, hp_slot);
1398                         slot_disable (ctrl, hp_slot);
1399
1400                         set_SOGO(ctrl);
1401
1402                         /* Wait for SOBS to be unset */
1403                         wait_for_ctrl_irq (ctrl);
1404
1405                         mutex_unlock(&ctrl->crit_sect);
1406                 }
1407
1408         }
1409         return rc;
1410
1411 }
1412
1413
1414 /**
1415  * board_added - Called after a board has been added to the system.
1416  * @func: PCI device/function info
1417  * @ctrl: hotplug controller
1418  *
1419  * Turns power on for the board.
1420  * Configures board.
1421  */
1422 static u32 board_added(struct pci_func *func, struct controller *ctrl)
1423 {
1424         u8 hp_slot;
1425         u8 temp_byte;
1426         u8 adapter_speed;
1427         int index;
1428         u32 temp_register = 0xFFFFFFFF;
1429         u32 rc = 0;
1430         struct pci_func *new_slot = NULL;
1431         struct pci_bus *bus = ctrl->pci_bus;
1432         struct slot *p_slot;
1433         struct resource_lists res_lists;
1434
1435         hp_slot = func->device - ctrl->slot_device_offset;
1436         dbg("%s: func->device, slot_offset, hp_slot = %d, %d ,%d\n",
1437             __func__, func->device, ctrl->slot_device_offset, hp_slot);
1438
1439         mutex_lock(&ctrl->crit_sect);
1440
1441         /* turn on board without attaching to the bus */
1442         enable_slot_power(ctrl, hp_slot);
1443
1444         set_SOGO(ctrl);
1445
1446         /* Wait for SOBS to be unset */
1447         wait_for_ctrl_irq (ctrl);
1448
1449         /* Change bits in slot power register to force another shift out
1450          * NOTE: this is to work around the timer bug
1451          */
1452         temp_byte = readb(ctrl->hpc_reg + SLOT_POWER);
1453         writeb(0x00, ctrl->hpc_reg + SLOT_POWER);
1454         writeb(temp_byte, ctrl->hpc_reg + SLOT_POWER);
1455
1456         set_SOGO(ctrl);
1457
1458         /* Wait for SOBS to be unset */
1459         wait_for_ctrl_irq (ctrl);
1460
1461         adapter_speed = get_adapter_speed(ctrl, hp_slot);
1462         if (bus->cur_bus_speed != adapter_speed)
1463                 if (set_controller_speed(ctrl, adapter_speed, hp_slot))
1464                         rc = WRONG_BUS_FREQUENCY;
1465
1466         /* turn off board without attaching to the bus */
1467         disable_slot_power (ctrl, hp_slot);
1468
1469         set_SOGO(ctrl);
1470
1471         /* Wait for SOBS to be unset */
1472         wait_for_ctrl_irq(ctrl);
1473
1474         mutex_unlock(&ctrl->crit_sect);
1475
1476         if (rc)
1477                 return rc;
1478
1479         p_slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
1480
1481         /* turn on board and blink green LED */
1482
1483         dbg("%s: before down\n", __func__);
1484         mutex_lock(&ctrl->crit_sect);
1485         dbg("%s: after down\n", __func__);
1486
1487         dbg("%s: before slot_enable\n", __func__);
1488         slot_enable (ctrl, hp_slot);
1489
1490         dbg("%s: before green_LED_blink\n", __func__);
1491         green_LED_blink (ctrl, hp_slot);
1492
1493         dbg("%s: before amber_LED_blink\n", __func__);
1494         amber_LED_off (ctrl, hp_slot);
1495
1496         dbg("%s: before set_SOGO\n", __func__);
1497         set_SOGO(ctrl);
1498
1499         /* Wait for SOBS to be unset */
1500         dbg("%s: before wait_for_ctrl_irq\n", __func__);
1501         wait_for_ctrl_irq (ctrl);
1502         dbg("%s: after wait_for_ctrl_irq\n", __func__);
1503
1504         dbg("%s: before up\n", __func__);
1505         mutex_unlock(&ctrl->crit_sect);
1506         dbg("%s: after up\n", __func__);
1507
1508         /* Wait for ~1 second because of hot plug spec */
1509         dbg("%s: before long_delay\n", __func__);
1510         long_delay(1*HZ);
1511         dbg("%s: after long_delay\n", __func__);
1512
1513         dbg("%s: func status = %x\n", __func__, func->status);
1514         /* Check for a power fault */
1515         if (func->status == 0xFF) {
1516                 /* power fault occurred, but it was benign */
1517                 temp_register = 0xFFFFFFFF;
1518                 dbg("%s: temp register set to %x by power fault\n", __func__, temp_register);
1519                 rc = POWER_FAILURE;
1520                 func->status = 0;
1521         } else {
1522                 /* Get vendor/device ID u32 */
1523                 ctrl->pci_bus->number = func->bus;
1524                 rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(func->device, func->function), PCI_VENDOR_ID, &temp_register);
1525                 dbg("%s: pci_read_config_dword returns %d\n", __func__, rc);
1526                 dbg("%s: temp_register is %x\n", __func__, temp_register);
1527
1528                 if (rc != 0) {
1529                         /* Something's wrong here */
1530                         temp_register = 0xFFFFFFFF;
1531                         dbg("%s: temp register set to %x by error\n", __func__, temp_register);
1532                 }
1533                 /* Preset return code.  It will be changed later if things go okay. */
1534                 rc = NO_ADAPTER_PRESENT;
1535         }
1536
1537         /* All F's is an empty slot or an invalid board */
1538         if (temp_register != 0xFFFFFFFF) {
1539                 res_lists.io_head = ctrl->io_head;
1540                 res_lists.mem_head = ctrl->mem_head;
1541                 res_lists.p_mem_head = ctrl->p_mem_head;
1542                 res_lists.bus_head = ctrl->bus_head;
1543                 res_lists.irqs = NULL;
1544
1545                 rc = configure_new_device(ctrl, func, 0, &res_lists);
1546
1547                 dbg("%s: back from configure_new_device\n", __func__);
1548                 ctrl->io_head = res_lists.io_head;
1549                 ctrl->mem_head = res_lists.mem_head;
1550                 ctrl->p_mem_head = res_lists.p_mem_head;
1551                 ctrl->bus_head = res_lists.bus_head;
1552
1553                 cpqhp_resource_sort_and_combine(&(ctrl->mem_head));
1554                 cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head));
1555                 cpqhp_resource_sort_and_combine(&(ctrl->io_head));
1556                 cpqhp_resource_sort_and_combine(&(ctrl->bus_head));
1557
1558                 if (rc) {
1559                         mutex_lock(&ctrl->crit_sect);
1560
1561                         amber_LED_on (ctrl, hp_slot);
1562                         green_LED_off (ctrl, hp_slot);
1563                         slot_disable (ctrl, hp_slot);
1564
1565                         set_SOGO(ctrl);
1566
1567                         /* Wait for SOBS to be unset */
1568                         wait_for_ctrl_irq (ctrl);
1569
1570                         mutex_unlock(&ctrl->crit_sect);
1571                         return rc;
1572                 } else {
1573                         cpqhp_save_slot_config(ctrl, func);
1574                 }
1575
1576
1577                 func->status = 0;
1578                 func->switch_save = 0x10;
1579                 func->is_a_board = 0x01;
1580
1581                 /* next, we will instantiate the linux pci_dev structures (with
1582                  * appropriate driver notification, if already present) */
1583                 dbg("%s: configure linux pci_dev structure\n", __func__);
1584                 index = 0;
1585                 do {
1586                         new_slot = cpqhp_slot_find(ctrl->bus, func->device, index++);
1587                         if (new_slot && !new_slot->pci_dev)
1588                                 cpqhp_configure_device(ctrl, new_slot);
1589                 } while (new_slot);
1590
1591                 mutex_lock(&ctrl->crit_sect);
1592
1593                 green_LED_on (ctrl, hp_slot);
1594
1595                 set_SOGO(ctrl);
1596
1597                 /* Wait for SOBS to be unset */
1598                 wait_for_ctrl_irq (ctrl);
1599
1600                 mutex_unlock(&ctrl->crit_sect);
1601         } else {
1602                 mutex_lock(&ctrl->crit_sect);
1603
1604                 amber_LED_on (ctrl, hp_slot);
1605                 green_LED_off (ctrl, hp_slot);
1606                 slot_disable (ctrl, hp_slot);
1607
1608                 set_SOGO(ctrl);
1609
1610                 /* Wait for SOBS to be unset */
1611                 wait_for_ctrl_irq (ctrl);
1612
1613                 mutex_unlock(&ctrl->crit_sect);
1614
1615                 return rc;
1616         }
1617         return 0;
1618 }
1619
1620
1621 /**
1622  * remove_board - Turns off slot and LEDs
1623  * @func: PCI device/function info
1624  * @replace_flag: whether replacing or adding a new device
1625  * @ctrl: target controller
1626  */
1627 static u32 remove_board(struct pci_func * func, u32 replace_flag, struct controller * ctrl)
1628 {
1629         int index;
1630         u8 skip = 0;
1631         u8 device;
1632         u8 hp_slot;
1633         u8 temp_byte;
1634         u32 rc;
1635         struct resource_lists res_lists;
1636         struct pci_func *temp_func;
1637
1638         if (cpqhp_unconfigure_device(func))
1639                 return 1;
1640
1641         device = func->device;
1642
1643         hp_slot = func->device - ctrl->slot_device_offset;
1644         dbg("In %s, hp_slot = %d\n", __func__, hp_slot);
1645
1646         /* When we get here, it is safe to change base address registers.
1647          * We will attempt to save the base address register lengths */
1648         if (replace_flag || !ctrl->add_support)
1649                 rc = cpqhp_save_base_addr_length(ctrl, func);
1650         else if (!func->bus_head && !func->mem_head &&
1651                  !func->p_mem_head && !func->io_head) {
1652                 /* Here we check to see if we've saved any of the board's
1653                  * resources already.  If so, we'll skip the attempt to
1654                  * determine what's being used. */
1655                 index = 0;
1656                 temp_func = cpqhp_slot_find(func->bus, func->device, index++);
1657                 while (temp_func) {
1658                         if (temp_func->bus_head || temp_func->mem_head
1659                             || temp_func->p_mem_head || temp_func->io_head) {
1660                                 skip = 1;
1661                                 break;
1662                         }
1663                         temp_func = cpqhp_slot_find(temp_func->bus, temp_func->device, index++);
1664                 }
1665
1666                 if (!skip)
1667                         rc = cpqhp_save_used_resources(ctrl, func);
1668         }
1669         /* Change status to shutdown */
1670         if (func->is_a_board)
1671                 func->status = 0x01;
1672         func->configured = 0;
1673
1674         mutex_lock(&ctrl->crit_sect);
1675
1676         green_LED_off (ctrl, hp_slot);
1677         slot_disable (ctrl, hp_slot);
1678
1679         set_SOGO(ctrl);
1680
1681         /* turn off SERR for slot */
1682         temp_byte = readb(ctrl->hpc_reg + SLOT_SERR);
1683         temp_byte &= ~(0x01 << hp_slot);
1684         writeb(temp_byte, ctrl->hpc_reg + SLOT_SERR);
1685
1686         /* Wait for SOBS to be unset */
1687         wait_for_ctrl_irq (ctrl);
1688
1689         mutex_unlock(&ctrl->crit_sect);
1690
1691         if (!replace_flag && ctrl->add_support) {
1692                 while (func) {
1693                         res_lists.io_head = ctrl->io_head;
1694                         res_lists.mem_head = ctrl->mem_head;
1695                         res_lists.p_mem_head = ctrl->p_mem_head;
1696                         res_lists.bus_head = ctrl->bus_head;
1697
1698                         cpqhp_return_board_resources(func, &res_lists);
1699
1700                         ctrl->io_head = res_lists.io_head;
1701                         ctrl->mem_head = res_lists.mem_head;
1702                         ctrl->p_mem_head = res_lists.p_mem_head;
1703                         ctrl->bus_head = res_lists.bus_head;
1704
1705                         cpqhp_resource_sort_and_combine(&(ctrl->mem_head));
1706                         cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head));
1707                         cpqhp_resource_sort_and_combine(&(ctrl->io_head));
1708                         cpqhp_resource_sort_and_combine(&(ctrl->bus_head));
1709
1710                         if (is_bridge(func)) {
1711                                 bridge_slot_remove(func);
1712                         } else
1713                                 slot_remove(func);
1714
1715                         func = cpqhp_slot_find(ctrl->bus, device, 0);
1716                 }
1717
1718                 /* Setup slot structure with entry for empty slot */
1719                 func = cpqhp_slot_create(ctrl->bus);
1720
1721                 if (func == NULL)
1722                         return 1;
1723
1724                 func->bus = ctrl->bus;
1725                 func->device = device;
1726                 func->function = 0;
1727                 func->configured = 0;
1728                 func->switch_save = 0x10;
1729                 func->is_a_board = 0;
1730                 func->p_task_event = NULL;
1731         }
1732
1733         return 0;
1734 }
1735
1736 static void pushbutton_helper_thread(unsigned long data)
1737 {
1738         pushbutton_pending = data;
1739         wake_up_process(cpqhp_event_thread);
1740 }
1741
1742
1743 /* this is the main worker thread */
1744 static int event_thread(void* data)
1745 {
1746         struct controller *ctrl;
1747
1748         while (1) {
1749                 dbg("!!!!event_thread sleeping\n");
1750                 set_current_state(TASK_INTERRUPTIBLE);
1751                 schedule();
1752
1753                 if (kthread_should_stop())
1754                         break;
1755                 /* Do stuff here */
1756                 if (pushbutton_pending)
1757                         cpqhp_pushbutton_thread(pushbutton_pending);
1758                 else
1759                         for (ctrl = cpqhp_ctrl_list; ctrl; ctrl=ctrl->next)
1760                                 interrupt_event_handler(ctrl);
1761         }
1762         dbg("event_thread signals exit\n");
1763         return 0;
1764 }
1765
1766 int cpqhp_event_start_thread(void)
1767 {
1768         cpqhp_event_thread = kthread_run(event_thread, NULL, "phpd_event");
1769         if (IS_ERR(cpqhp_event_thread)) {
1770                 err ("Can't start up our event thread\n");
1771                 return PTR_ERR(cpqhp_event_thread);
1772         }
1773
1774         return 0;
1775 }
1776
1777
1778 void cpqhp_event_stop_thread(void)
1779 {
1780         kthread_stop(cpqhp_event_thread);
1781 }
1782
1783
1784 static int update_slot_info(struct controller *ctrl, struct slot *slot)
1785 {
1786         struct hotplug_slot_info *info;
1787         int result;
1788
1789         info = kmalloc(sizeof(*info), GFP_KERNEL);
1790         if (!info)
1791                 return -ENOMEM;
1792
1793         info->power_status = get_slot_enabled(ctrl, slot);
1794         info->attention_status = cpq_get_attention_status(ctrl, slot);
1795         info->latch_status = cpq_get_latch_status(ctrl, slot);
1796         info->adapter_status = get_presence_status(ctrl, slot);
1797         result = pci_hp_change_slot_info(slot->hotplug_slot, info);
1798         kfree (info);
1799         return result;
1800 }
1801
1802 static void interrupt_event_handler(struct controller *ctrl)
1803 {
1804         int loop = 0;
1805         int change = 1;
1806         struct pci_func *func;
1807         u8 hp_slot;
1808         struct slot *p_slot;
1809
1810         while (change) {
1811                 change = 0;
1812
1813                 for (loop = 0; loop < 10; loop++) {
1814                         /* dbg("loop %d\n", loop); */
1815                         if (ctrl->event_queue[loop].event_type != 0) {
1816                                 hp_slot = ctrl->event_queue[loop].hp_slot;
1817
1818                                 func = cpqhp_slot_find(ctrl->bus, (hp_slot + ctrl->slot_device_offset), 0);
1819                                 if (!func)
1820                                         return;
1821
1822                                 p_slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
1823                                 if (!p_slot)
1824                                         return;
1825
1826                                 dbg("hp_slot %d, func %p, p_slot %p\n",
1827                                     hp_slot, func, p_slot);
1828
1829                                 if (ctrl->event_queue[loop].event_type == INT_BUTTON_PRESS) {
1830                                         dbg("button pressed\n");
1831                                 } else if (ctrl->event_queue[loop].event_type ==
1832                                            INT_BUTTON_CANCEL) {
1833                                         dbg("button cancel\n");
1834                                         del_timer(&p_slot->task_event);
1835
1836                                         mutex_lock(&ctrl->crit_sect);
1837
1838                                         if (p_slot->state == BLINKINGOFF_STATE) {
1839                                                 /* slot is on */
1840                                                 dbg("turn on green LED\n");
1841                                                 green_LED_on (ctrl, hp_slot);
1842                                         } else if (p_slot->state == BLINKINGON_STATE) {
1843                                                 /* slot is off */
1844                                                 dbg("turn off green LED\n");
1845                                                 green_LED_off (ctrl, hp_slot);
1846                                         }
1847
1848                                         info(msg_button_cancel, p_slot->number);
1849
1850                                         p_slot->state = STATIC_STATE;
1851
1852                                         amber_LED_off (ctrl, hp_slot);
1853
1854                                         set_SOGO(ctrl);
1855
1856                                         /* Wait for SOBS to be unset */
1857                                         wait_for_ctrl_irq (ctrl);
1858
1859                                         mutex_unlock(&ctrl->crit_sect);
1860                                 }
1861                                 /*** button Released (No action on press...) */
1862                                 else if (ctrl->event_queue[loop].event_type == INT_BUTTON_RELEASE) {
1863                                         dbg("button release\n");
1864
1865                                         if (is_slot_enabled (ctrl, hp_slot)) {
1866                                                 dbg("slot is on\n");
1867                                                 p_slot->state = BLINKINGOFF_STATE;
1868                                                 info(msg_button_off, p_slot->number);
1869                                         } else {
1870                                                 dbg("slot is off\n");
1871                                                 p_slot->state = BLINKINGON_STATE;
1872                                                 info(msg_button_on, p_slot->number);
1873                                         }
1874                                         mutex_lock(&ctrl->crit_sect);
1875
1876                                         dbg("blink green LED and turn off amber\n");
1877
1878                                         amber_LED_off (ctrl, hp_slot);
1879                                         green_LED_blink (ctrl, hp_slot);
1880
1881                                         set_SOGO(ctrl);
1882
1883                                         /* Wait for SOBS to be unset */
1884                                         wait_for_ctrl_irq (ctrl);
1885
1886                                         mutex_unlock(&ctrl->crit_sect);
1887                                         init_timer(&p_slot->task_event);
1888                                         p_slot->hp_slot = hp_slot;
1889                                         p_slot->ctrl = ctrl;
1890 /*                                      p_slot->physical_slot = physical_slot; */
1891                                         p_slot->task_event.expires = jiffies + 5 * HZ;   /* 5 second delay */
1892                                         p_slot->task_event.function = pushbutton_helper_thread;
1893                                         p_slot->task_event.data = (u32) p_slot;
1894
1895                                         dbg("add_timer p_slot = %p\n", p_slot);
1896                                         add_timer(&p_slot->task_event);
1897                                 }
1898                                 /***********POWER FAULT */
1899                                 else if (ctrl->event_queue[loop].event_type == INT_POWER_FAULT) {
1900                                         dbg("power fault\n");
1901                                 } else {
1902                                         /* refresh notification */
1903                                         update_slot_info(ctrl, p_slot);
1904                                 }
1905
1906                                 ctrl->event_queue[loop].event_type = 0;
1907
1908                                 change = 1;
1909                         }
1910                 }               /* End of FOR loop */
1911         }
1912
1913         return;
1914 }
1915
1916
1917 /**
1918  * cpqhp_pushbutton_thread - handle pushbutton events
1919  * @slot: target slot (struct)
1920  *
1921  * Scheduled procedure to handle blocking stuff for the pushbuttons.
1922  * Handles all pending events and exits.
1923  */
1924 void cpqhp_pushbutton_thread(unsigned long slot)
1925 {
1926         u8 hp_slot;
1927         u8 device;
1928         struct pci_func *func;
1929         struct slot *p_slot = (struct slot *) slot;
1930         struct controller *ctrl = (struct controller *) p_slot->ctrl;
1931
1932         pushbutton_pending = 0;
1933         hp_slot = p_slot->hp_slot;
1934
1935         device = p_slot->device;
1936
1937         if (is_slot_enabled(ctrl, hp_slot)) {
1938                 p_slot->state = POWEROFF_STATE;
1939                 /* power Down board */
1940                 func = cpqhp_slot_find(p_slot->bus, p_slot->device, 0);
1941                 dbg("In power_down_board, func = %p, ctrl = %p\n", func, ctrl);
1942                 if (!func) {
1943                         dbg("Error! func NULL in %s\n", __func__);
1944                         return ;
1945                 }
1946
1947                 if (cpqhp_process_SS(ctrl, func) != 0) {
1948                         amber_LED_on(ctrl, hp_slot);
1949                         green_LED_on(ctrl, hp_slot);
1950
1951                         set_SOGO(ctrl);
1952
1953                         /* Wait for SOBS to be unset */
1954                         wait_for_ctrl_irq(ctrl);
1955                 }
1956
1957                 p_slot->state = STATIC_STATE;
1958         } else {
1959                 p_slot->state = POWERON_STATE;
1960                 /* slot is off */
1961
1962                 func = cpqhp_slot_find(p_slot->bus, p_slot->device, 0);
1963                 dbg("In add_board, func = %p, ctrl = %p\n", func, ctrl);
1964                 if (!func) {
1965                         dbg("Error! func NULL in %s\n", __func__);
1966                         return ;
1967                 }
1968
1969                 if (ctrl != NULL) {
1970                         if (cpqhp_process_SI(ctrl, func) != 0) {
1971                                 amber_LED_on(ctrl, hp_slot);
1972                                 green_LED_off(ctrl, hp_slot);
1973
1974                                 set_SOGO(ctrl);
1975
1976                                 /* Wait for SOBS to be unset */
1977                                 wait_for_ctrl_irq (ctrl);
1978                         }
1979                 }
1980
1981                 p_slot->state = STATIC_STATE;
1982         }
1983
1984         return;
1985 }
1986
1987
1988 int cpqhp_process_SI(struct controller *ctrl, struct pci_func *func)
1989 {
1990         u8 device, hp_slot;
1991         u16 temp_word;
1992         u32 tempdword;
1993         int rc;
1994         struct slot* p_slot;
1995         int physical_slot = 0;
1996
1997         tempdword = 0;
1998
1999         device = func->device;
2000         hp_slot = device - ctrl->slot_device_offset;
2001         p_slot = cpqhp_find_slot(ctrl, device);
2002         if (p_slot)
2003                 physical_slot = p_slot->number;
2004
2005         /* Check to see if the interlock is closed */
2006         tempdword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
2007
2008         if (tempdword & (0x01 << hp_slot)) {
2009                 return 1;
2010         }
2011
2012         if (func->is_a_board) {
2013                 rc = board_replaced(func, ctrl);
2014         } else {
2015                 /* add board */
2016                 slot_remove(func);
2017
2018                 func = cpqhp_slot_create(ctrl->bus);
2019                 if (func == NULL)
2020                         return 1;
2021
2022                 func->bus = ctrl->bus;
2023                 func->device = device;
2024                 func->function = 0;
2025                 func->configured = 0;
2026                 func->is_a_board = 1;
2027
2028                 /* We have to save the presence info for these slots */
2029                 temp_word = ctrl->ctrl_int_comp >> 16;
2030                 func->presence_save = (temp_word >> hp_slot) & 0x01;
2031                 func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
2032
2033                 if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) {
2034                         func->switch_save = 0;
2035                 } else {
2036                         func->switch_save = 0x10;
2037                 }
2038
2039                 rc = board_added(func, ctrl);
2040                 if (rc) {
2041                         if (is_bridge(func)) {
2042                                 bridge_slot_remove(func);
2043                         } else
2044                                 slot_remove(func);
2045
2046                         /* Setup slot structure with entry for empty slot */
2047                         func = cpqhp_slot_create(ctrl->bus);
2048
2049                         if (func == NULL)
2050                                 return 1;
2051
2052                         func->bus = ctrl->bus;
2053                         func->device = device;
2054                         func->function = 0;
2055                         func->configured = 0;
2056                         func->is_a_board = 0;
2057
2058                         /* We have to save the presence info for these slots */
2059                         temp_word = ctrl->ctrl_int_comp >> 16;
2060                         func->presence_save = (temp_word >> hp_slot) & 0x01;
2061                         func->presence_save |=
2062                         (temp_word >> (hp_slot + 7)) & 0x02;
2063
2064                         if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) {
2065                                 func->switch_save = 0;
2066                         } else {
2067                                 func->switch_save = 0x10;
2068                         }
2069                 }
2070         }
2071
2072         if (rc) {
2073                 dbg("%s: rc = %d\n", __func__, rc);
2074         }
2075
2076         if (p_slot)
2077                 update_slot_info(ctrl, p_slot);
2078
2079         return rc;
2080 }
2081
2082
2083 int cpqhp_process_SS(struct controller *ctrl, struct pci_func *func)
2084 {
2085         u8 device, class_code, header_type, BCR;
2086         u8 index = 0;
2087         u8 replace_flag;
2088         u32 rc = 0;
2089         unsigned int devfn;
2090         struct slot* p_slot;
2091         struct pci_bus *pci_bus = ctrl->pci_bus;
2092         int physical_slot=0;
2093
2094         device = func->device;
2095         func = cpqhp_slot_find(ctrl->bus, device, index++);
2096         p_slot = cpqhp_find_slot(ctrl, device);
2097         if (p_slot) {
2098                 physical_slot = p_slot->number;
2099         }
2100
2101         /* Make sure there are no video controllers here */
2102         while (func && !rc) {
2103                 pci_bus->number = func->bus;
2104                 devfn = PCI_DEVFN(func->device, func->function);
2105
2106                 /* Check the Class Code */
2107                 rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code);
2108                 if (rc)
2109                         return rc;
2110
2111                 if (class_code == PCI_BASE_CLASS_DISPLAY) {
2112                         /* Display/Video adapter (not supported) */
2113                         rc = REMOVE_NOT_SUPPORTED;
2114                 } else {
2115                         /* See if it's a bridge */
2116                         rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
2117                         if (rc)
2118                                 return rc;
2119
2120                         /* If it's a bridge, check the VGA Enable bit */
2121                         if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
2122                                 rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_BRIDGE_CONTROL, &BCR);
2123                                 if (rc)
2124                                         return rc;
2125
2126                                 /* If the VGA Enable bit is set, remove isn't
2127                                  * supported */
2128                                 if (BCR & PCI_BRIDGE_CTL_VGA)
2129                                         rc = REMOVE_NOT_SUPPORTED;
2130                         }
2131                 }
2132
2133                 func = cpqhp_slot_find(ctrl->bus, device, index++);
2134         }
2135
2136         func = cpqhp_slot_find(ctrl->bus, device, 0);
2137         if ((func != NULL) && !rc) {
2138                 /* FIXME: Replace flag should be passed into process_SS */
2139                 replace_flag = !(ctrl->add_support);
2140                 rc = remove_board(func, replace_flag, ctrl);
2141         } else if (!rc) {
2142                 rc = 1;
2143         }
2144
2145         if (p_slot)
2146                 update_slot_info(ctrl, p_slot);
2147
2148         return rc;
2149 }
2150
2151 /**
2152  * switch_leds - switch the leds, go from one site to the other.
2153  * @ctrl: controller to use
2154  * @num_of_slots: number of slots to use
2155  * @work_LED: LED control value
2156  * @direction: 1 to start from the left side, 0 to start right.
2157  */
2158 static void switch_leds(struct controller *ctrl, const int num_of_slots,
2159                         u32 *work_LED, const int direction)
2160 {
2161         int loop;
2162
2163         for (loop = 0; loop < num_of_slots; loop++) {
2164                 if (direction)
2165                         *work_LED = *work_LED >> 1;
2166                 else
2167                         *work_LED = *work_LED << 1;
2168                 writel(*work_LED, ctrl->hpc_reg + LED_CONTROL);
2169
2170                 set_SOGO(ctrl);
2171
2172                 /* Wait for SOGO interrupt */
2173                 wait_for_ctrl_irq(ctrl);
2174
2175                 /* Get ready for next iteration */
2176                 long_delay((2*HZ)/10);
2177         }
2178 }
2179
2180 /**
2181  * cpqhp_hardware_test - runs hardware tests
2182  * @ctrl: target controller
2183  * @test_num: the number written to the "test" file in sysfs.
2184  *
2185  * For hot plug ctrl folks to play with.
2186  */
2187 int cpqhp_hardware_test(struct controller *ctrl, int test_num)
2188 {
2189         u32 save_LED;
2190         u32 work_LED;
2191         int loop;
2192         int num_of_slots;
2193
2194         num_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0f;
2195
2196         switch (test_num) {
2197         case 1:
2198                 /* Do stuff here! */
2199
2200                 /* Do that funky LED thing */
2201                 /* so we can restore them later */
2202                 save_LED = readl(ctrl->hpc_reg + LED_CONTROL);
2203                 work_LED = 0x01010101;
2204                 switch_leds(ctrl, num_of_slots, &work_LED, 0);
2205                 switch_leds(ctrl, num_of_slots, &work_LED, 1);
2206                 switch_leds(ctrl, num_of_slots, &work_LED, 0);
2207                 switch_leds(ctrl, num_of_slots, &work_LED, 1);
2208
2209                 work_LED = 0x01010000;
2210                 writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
2211                 switch_leds(ctrl, num_of_slots, &work_LED, 0);
2212                 switch_leds(ctrl, num_of_slots, &work_LED, 1);
2213                 work_LED = 0x00000101;
2214                 writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
2215                 switch_leds(ctrl, num_of_slots, &work_LED, 0);
2216                 switch_leds(ctrl, num_of_slots, &work_LED, 1);
2217
2218                 work_LED = 0x01010000;
2219                 writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
2220                 for (loop = 0; loop < num_of_slots; loop++) {
2221                         set_SOGO(ctrl);
2222
2223                         /* Wait for SOGO interrupt */
2224                         wait_for_ctrl_irq (ctrl);
2225
2226                         /* Get ready for next iteration */
2227                         long_delay((3*HZ)/10);
2228                         work_LED = work_LED >> 16;
2229                         writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
2230
2231                         set_SOGO(ctrl);
2232
2233                         /* Wait for SOGO interrupt */
2234                         wait_for_ctrl_irq (ctrl);
2235
2236                         /* Get ready for next iteration */
2237                         long_delay((3*HZ)/10);
2238                         work_LED = work_LED << 16;
2239                         writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
2240                         work_LED = work_LED << 1;
2241                         writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
2242                 }
2243
2244                 /* put it back the way it was */
2245                 writel(save_LED, ctrl->hpc_reg + LED_CONTROL);
2246
2247                 set_SOGO(ctrl);
2248
2249                 /* Wait for SOBS to be unset */
2250                 wait_for_ctrl_irq (ctrl);
2251                 break;
2252         case 2:
2253                 /* Do other stuff here! */
2254                 break;
2255         case 3:
2256                 /* and more... */
2257                 break;
2258         }
2259         return 0;
2260 }
2261
2262
2263 /**
2264  * configure_new_device - Configures the PCI header information of one board.
2265  * @ctrl: pointer to controller structure
2266  * @func: pointer to function structure
2267  * @behind_bridge: 1 if this is a recursive call, 0 if not
2268  * @resources: pointer to set of resource lists
2269  *
2270  * Returns 0 if success.
2271  */
2272 static u32 configure_new_device(struct controller * ctrl, struct pci_func * func,
2273                                  u8 behind_bridge, struct resource_lists * resources)
2274 {
2275         u8 temp_byte, function, max_functions, stop_it;
2276         int rc;
2277         u32 ID;
2278         struct pci_func *new_slot;
2279         int index;
2280
2281         new_slot = func;
2282
2283         dbg("%s\n", __func__);
2284         /* Check for Multi-function device */
2285         ctrl->pci_bus->number = func->bus;
2286         rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(func->device, func->function), 0x0E, &temp_byte);
2287         if (rc) {
2288                 dbg("%s: rc = %d\n", __func__, rc);
2289                 return rc;
2290         }
2291
2292         if (temp_byte & 0x80)   /* Multi-function device */
2293                 max_functions = 8;
2294         else
2295                 max_functions = 1;
2296
2297         function = 0;
2298
2299         do {
2300                 rc = configure_new_function(ctrl, new_slot, behind_bridge, resources);
2301
2302                 if (rc) {
2303                         dbg("configure_new_function failed %d\n",rc);
2304                         index = 0;
2305
2306                         while (new_slot) {
2307                                 new_slot = cpqhp_slot_find(new_slot->bus, new_slot->device, index++);
2308
2309                                 if (new_slot)
2310                                         cpqhp_return_board_resources(new_slot, resources);
2311                         }
2312
2313                         return rc;
2314                 }
2315
2316                 function++;
2317
2318                 stop_it = 0;
2319
2320                 /* The following loop skips to the next present function
2321                  * and creates a board structure */
2322
2323                 while ((function < max_functions) && (!stop_it)) {
2324                         pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(func->device, function), 0x00, &ID);
2325
2326                         if (ID == 0xFFFFFFFF) {
2327                                 function++;
2328                         } else {
2329                                 /* Setup slot structure. */
2330                                 new_slot = cpqhp_slot_create(func->bus);
2331
2332                                 if (new_slot == NULL)
2333                                         return 1;
2334
2335                                 new_slot->bus = func->bus;
2336                                 new_slot->device = func->device;
2337                                 new_slot->function = function;
2338                                 new_slot->is_a_board = 1;
2339                                 new_slot->status = 0;
2340
2341                                 stop_it++;
2342                         }
2343                 }
2344
2345         } while (function < max_functions);
2346         dbg("returning from configure_new_device\n");
2347
2348         return 0;
2349 }
2350
2351
2352 /*
2353  * Configuration logic that involves the hotplug data structures and
2354  * their bookkeeping
2355  */
2356
2357
2358 /**
2359  * configure_new_function - Configures the PCI header information of one device
2360  * @ctrl: pointer to controller structure
2361  * @func: pointer to function structure
2362  * @behind_bridge: 1 if this is a recursive call, 0 if not
2363  * @resources: pointer to set of resource lists
2364  *
2365  * Calls itself recursively for bridged devices.
2366  * Returns 0 if success.
2367  */
2368 static int configure_new_function(struct controller *ctrl, struct pci_func *func,
2369                                    u8 behind_bridge,
2370                                    struct resource_lists *resources)
2371 {
2372         int cloop;
2373         u8 IRQ = 0;
2374         u8 temp_byte;
2375         u8 device;
2376         u8 class_code;
2377         u16 command;
2378         u16 temp_word;
2379         u32 temp_dword;
2380         u32 rc;
2381         u32 temp_register;
2382         u32 base;
2383         u32 ID;
2384         unsigned int devfn;
2385         struct pci_resource *mem_node;
2386         struct pci_resource *p_mem_node;
2387         struct pci_resource *io_node;
2388         struct pci_resource *bus_node;
2389         struct pci_resource *hold_mem_node;
2390         struct pci_resource *hold_p_mem_node;
2391         struct pci_resource *hold_IO_node;
2392         struct pci_resource *hold_bus_node;
2393         struct irq_mapping irqs;
2394         struct pci_func *new_slot;
2395         struct pci_bus *pci_bus;
2396         struct resource_lists temp_resources;
2397
2398         pci_bus = ctrl->pci_bus;
2399         pci_bus->number = func->bus;
2400         devfn = PCI_DEVFN(func->device, func->function);
2401
2402         /* Check for Bridge */
2403         rc = pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &temp_byte);
2404         if (rc)
2405                 return rc;
2406
2407         if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
2408                 /* set Primary bus */
2409                 dbg("set Primary bus = %d\n", func->bus);
2410                 rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_PRIMARY_BUS, func->bus);
2411                 if (rc)
2412                         return rc;
2413
2414                 /* find range of buses to use */
2415                 dbg("find ranges of buses to use\n");
2416                 bus_node = get_max_resource(&(resources->bus_head), 1);
2417
2418                 /* If we don't have any buses to allocate, we can't continue */
2419                 if (!bus_node)
2420                         return -ENOMEM;
2421
2422                 /* set Secondary bus */
2423                 temp_byte = bus_node->base;
2424                 dbg("set Secondary bus = %d\n", bus_node->base);
2425                 rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, temp_byte);
2426                 if (rc)
2427                         return rc;
2428
2429                 /* set subordinate bus */
2430                 temp_byte = bus_node->base + bus_node->length - 1;
2431                 dbg("set subordinate bus = %d\n", bus_node->base + bus_node->length - 1);
2432                 rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_SUBORDINATE_BUS, temp_byte);
2433                 if (rc)
2434                         return rc;
2435
2436                 /* set subordinate Latency Timer and base Latency Timer */
2437                 temp_byte = 0x40;
2438                 rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_SEC_LATENCY_TIMER, temp_byte);
2439                 if (rc)
2440                         return rc;
2441                 rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_LATENCY_TIMER, temp_byte);
2442                 if (rc)
2443                         return rc;
2444
2445                 /* set Cache Line size */
2446                 temp_byte = 0x08;
2447                 rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_CACHE_LINE_SIZE, temp_byte);
2448                 if (rc)
2449                         return rc;
2450
2451                 /* Setup the IO, memory, and prefetchable windows */
2452                 io_node = get_max_resource(&(resources->io_head), 0x1000);
2453                 if (!io_node)
2454                         return -ENOMEM;
2455                 mem_node = get_max_resource(&(resources->mem_head), 0x100000);
2456                 if (!mem_node)
2457                         return -ENOMEM;
2458                 p_mem_node = get_max_resource(&(resources->p_mem_head), 0x100000);
2459                 if (!p_mem_node)
2460                         return -ENOMEM;
2461                 dbg("Setup the IO, memory, and prefetchable windows\n");
2462                 dbg("io_node\n");
2463                 dbg("(base, len, next) (%x, %x, %p)\n", io_node->base,
2464                                         io_node->length, io_node->next);
2465                 dbg("mem_node\n");
2466                 dbg("(base, len, next) (%x, %x, %p)\n", mem_node->base,
2467                                         mem_node->length, mem_node->next);
2468                 dbg("p_mem_node\n");
2469                 dbg("(base, len, next) (%x, %x, %p)\n", p_mem_node->base,
2470                                         p_mem_node->length, p_mem_node->next);
2471
2472                 /* set up the IRQ info */
2473                 if (!resources->irqs) {
2474                         irqs.barber_pole = 0;
2475                         irqs.interrupt[0] = 0;
2476                         irqs.interrupt[1] = 0;
2477                         irqs.interrupt[2] = 0;
2478                         irqs.interrupt[3] = 0;
2479                         irqs.valid_INT = 0;
2480                 } else {
2481                         irqs.barber_pole = resources->irqs->barber_pole;
2482                         irqs.interrupt[0] = resources->irqs->interrupt[0];
2483                         irqs.interrupt[1] = resources->irqs->interrupt[1];
2484                         irqs.interrupt[2] = resources->irqs->interrupt[2];
2485                         irqs.interrupt[3] = resources->irqs->interrupt[3];
2486                         irqs.valid_INT = resources->irqs->valid_INT;
2487                 }
2488
2489                 /* set up resource lists that are now aligned on top and bottom
2490                  * for anything behind the bridge. */
2491                 temp_resources.bus_head = bus_node;
2492                 temp_resources.io_head = io_node;
2493                 temp_resources.mem_head = mem_node;
2494                 temp_resources.p_mem_head = p_mem_node;
2495                 temp_resources.irqs = &irqs;
2496
2497                 /* Make copies of the nodes we are going to pass down so that
2498                  * if there is a problem,we can just use these to free resources
2499                  */
2500                 hold_bus_node = kmalloc(sizeof(*hold_bus_node), GFP_KERNEL);
2501                 hold_IO_node = kmalloc(sizeof(*hold_IO_node), GFP_KERNEL);
2502                 hold_mem_node = kmalloc(sizeof(*hold_mem_node), GFP_KERNEL);
2503                 hold_p_mem_node = kmalloc(sizeof(*hold_p_mem_node), GFP_KERNEL);
2504
2505                 if (!hold_bus_node || !hold_IO_node || !hold_mem_node || !hold_p_mem_node) {
2506                         kfree(hold_bus_node);
2507                         kfree(hold_IO_node);
2508                         kfree(hold_mem_node);
2509                         kfree(hold_p_mem_node);
2510
2511                         return 1;
2512                 }
2513
2514                 memcpy(hold_bus_node, bus_node, sizeof(struct pci_resource));
2515
2516                 bus_node->base += 1;
2517                 bus_node->length -= 1;
2518                 bus_node->next = NULL;
2519
2520                 /* If we have IO resources copy them and fill in the bridge's
2521                  * IO range registers */
2522                 memcpy(hold_IO_node, io_node, sizeof(struct pci_resource));
2523                 io_node->next = NULL;
2524
2525                 /* set IO base and Limit registers */
2526                 temp_byte = io_node->base >> 8;
2527                 rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_IO_BASE, temp_byte);
2528
2529                 temp_byte = (io_node->base + io_node->length - 1) >> 8;
2530                 rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_IO_LIMIT, temp_byte);
2531
2532                 /* Copy the memory resources and fill in the bridge's memory
2533                  * range registers.
2534                  */
2535                 memcpy(hold_mem_node, mem_node, sizeof(struct pci_resource));
2536                 mem_node->next = NULL;
2537
2538                 /* set Mem base and Limit registers */
2539                 temp_word = mem_node->base >> 16;
2540                 rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_BASE, temp_word);
2541
2542                 temp_word = (mem_node->base + mem_node->length - 1) >> 16;
2543                 rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word);
2544
2545                 memcpy(hold_p_mem_node, p_mem_node, sizeof(struct pci_resource));
2546                 p_mem_node->next = NULL;
2547
2548                 /* set Pre Mem base and Limit registers */
2549                 temp_word = p_mem_node->base >> 16;
2550                 rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_BASE, temp_word);
2551
2552                 temp_word = (p_mem_node->base + p_mem_node->length - 1) >> 16;
2553                 rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
2554
2555                 /* Adjust this to compensate for extra adjustment in first loop
2556                  */
2557                 irqs.barber_pole--;
2558
2559                 rc = 0;
2560
2561                 /* Here we actually find the devices and configure them */
2562                 for (device = 0; (device <= 0x1F) && !rc; device++) {
2563                         irqs.barber_pole = (irqs.barber_pole + 1) & 0x03;
2564
2565                         ID = 0xFFFFFFFF;
2566                         pci_bus->number = hold_bus_node->base;
2567                         pci_bus_read_config_dword (pci_bus, PCI_DEVFN(device, 0), 0x00, &ID);
2568                         pci_bus->number = func->bus;
2569
2570                         if (ID != 0xFFFFFFFF) {   /*  device present */
2571                                 /* Setup slot structure. */
2572                                 new_slot = cpqhp_slot_create(hold_bus_node->base);
2573
2574                                 if (new_slot == NULL) {
2575                                         rc = -ENOMEM;
2576                                         continue;
2577                                 }
2578
2579                                 new_slot->bus = hold_bus_node->base;
2580                                 new_slot->device = device;
2581                                 new_slot->function = 0;
2582                                 new_slot->is_a_board = 1;
2583                                 new_slot->status = 0;
2584
2585                                 rc = configure_new_device(ctrl, new_slot, 1, &temp_resources);
2586                                 dbg("configure_new_device rc=0x%x\n",rc);
2587                         }       /* End of IF (device in slot?) */
2588                 }               /* End of FOR loop */
2589
2590                 if (rc)
2591                         goto free_and_out;
2592                 /* save the interrupt routing information */
2593                 if (resources->irqs) {
2594                         resources->irqs->interrupt[0] = irqs.interrupt[0];
2595                         resources->irqs->interrupt[1] = irqs.interrupt[1];
2596                         resources->irqs->interrupt[2] = irqs.interrupt[2];
2597                         resources->irqs->interrupt[3] = irqs.interrupt[3];
2598                         resources->irqs->valid_INT = irqs.valid_INT;
2599                 } else if (!behind_bridge) {
2600                         /* We need to hook up the interrupts here */
2601                         for (cloop = 0; cloop < 4; cloop++) {
2602                                 if (irqs.valid_INT & (0x01 << cloop)) {
2603                                         rc = cpqhp_set_irq(func->bus, func->device,
2604                                                            cloop + 1, irqs.interrupt[cloop]);
2605                                         if (rc)
2606                                                 goto free_and_out;
2607                                 }
2608                         }       /* end of for loop */
2609                 }
2610                 /* Return unused bus resources
2611                  * First use the temporary node to store information for
2612                  * the board */
2613                 if (bus_node && temp_resources.bus_head) {
2614                         hold_bus_node->length = bus_node->base - hold_bus_node->base;
2615
2616                         hold_bus_node->next = func->bus_head;
2617                         func->bus_head = hold_bus_node;
2618
2619                         temp_byte = temp_resources.bus_head->base - 1;
2620
2621                         /* set subordinate bus */
2622                         rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_SUBORDINATE_BUS, temp_byte);
2623
2624                         if (temp_resources.bus_head->length == 0) {
2625                                 kfree(temp_resources.bus_head);
2626                                 temp_resources.bus_head = NULL;
2627                         } else {
2628                                 return_resource(&(resources->bus_head), temp_resources.bus_head);
2629                         }
2630                 }
2631
2632                 /* If we have IO space available and there is some left,
2633                  * return the unused portion */
2634                 if (hold_IO_node && temp_resources.io_head) {
2635                         io_node = do_pre_bridge_resource_split(&(temp_resources.io_head),
2636                                                                &hold_IO_node, 0x1000);
2637
2638                         /* Check if we were able to split something off */
2639                         if (io_node) {
2640                                 hold_IO_node->base = io_node->base + io_node->length;
2641
2642                                 temp_byte = (hold_IO_node->base) >> 8;
2643                                 rc = pci_bus_write_config_word (pci_bus, devfn, PCI_IO_BASE, temp_byte);
2644
2645                                 return_resource(&(resources->io_head), io_node);
2646                         }
2647
2648                         io_node = do_bridge_resource_split(&(temp_resources.io_head), 0x1000);
2649
2650                         /* Check if we were able to split something off */
2651                         if (io_node) {
2652                                 /* First use the temporary node to store
2653                                  * information for the board */
2654                                 hold_IO_node->length = io_node->base - hold_IO_node->base;
2655
2656                                 /* If we used any, add it to the board's list */
2657                                 if (hold_IO_node->length) {
2658                                         hold_IO_node->next = func->io_head;
2659                                         func->io_head = hold_IO_node;
2660
2661                                         temp_byte = (io_node->base - 1) >> 8;
2662                                         rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_IO_LIMIT, temp_byte);
2663
2664                                         return_resource(&(resources->io_head), io_node);
2665                                 } else {
2666                                         /* it doesn't need any IO */
2667                                         temp_word = 0x0000;
2668                                         rc = pci_bus_write_config_word (pci_bus, devfn, PCI_IO_LIMIT, temp_word);
2669
2670                                         return_resource(&(resources->io_head), io_node);
2671                                         kfree(hold_IO_node);
2672                                 }
2673                         } else {
2674                                 /* it used most of the range */
2675                                 hold_IO_node->next = func->io_head;
2676                                 func->io_head = hold_IO_node;
2677                         }
2678                 } else if (hold_IO_node) {
2679                         /* it used the whole range */
2680                         hold_IO_node->next = func->io_head;
2681                         func->io_head = hold_IO_node;
2682                 }
2683                 /* If we have memory space available and there is some left,
2684                  * return the unused portion */
2685                 if (hold_mem_node && temp_resources.mem_head) {
2686                         mem_node = do_pre_bridge_resource_split(&(temp_resources.  mem_head),
2687                                                                 &hold_mem_node, 0x100000);
2688
2689                         /* Check if we were able to split something off */
2690                         if (mem_node) {
2691                                 hold_mem_node->base = mem_node->base + mem_node->length;
2692
2693                                 temp_word = (hold_mem_node->base) >> 16;
2694                                 rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_BASE, temp_word);
2695
2696                                 return_resource(&(resources->mem_head), mem_node);
2697                         }
2698
2699                         mem_node = do_bridge_resource_split(&(temp_resources.mem_head), 0x100000);
2700
2701                         /* Check if we were able to split something off */
2702                         if (mem_node) {
2703                                 /* First use the temporary node to store
2704                                  * information for the board */
2705                                 hold_mem_node->length = mem_node->base - hold_mem_node->base;
2706
2707                                 if (hold_mem_node->length) {
2708                                         hold_mem_node->next = func->mem_head;
2709                                         func->mem_head = hold_mem_node;
2710
2711                                         /* configure end address */
2712                                         temp_word = (mem_node->base - 1) >> 16;
2713                                         rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word);
2714
2715                                         /* Return unused resources to the pool */
2716                                         return_resource(&(resources->mem_head), mem_node);
2717                                 } else {
2718                                         /* it doesn't need any Mem */
2719                                         temp_word = 0x0000;
2720                                         rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word);
2721
2722                                         return_resource(&(resources->mem_head), mem_node);
2723                                         kfree(hold_mem_node);
2724                                 }
2725                         } else {
2726                                 /* it used most of the range */
2727                                 hold_mem_node->next = func->mem_head;
2728                                 func->mem_head = hold_mem_node;
2729                         }
2730                 } else if (hold_mem_node) {
2731                         /* it used the whole range */
2732                         hold_mem_node->next = func->mem_head;
2733                         func->mem_head = hold_mem_node;
2734                 }
2735                 /* If we have prefetchable memory space available and there
2736                  * is some left at the end, return the unused portion */
2737                 if (temp_resources.p_mem_head) {
2738                         p_mem_node = do_pre_bridge_resource_split(&(temp_resources.p_mem_head),
2739                                                                   &hold_p_mem_node, 0x100000);
2740
2741                         /* Check if we were able to split something off */
2742                         if (p_mem_node) {
2743                                 hold_p_mem_node->base = p_mem_node->base + p_mem_node->length;
2744
2745                                 temp_word = (hold_p_mem_node->base) >> 16;
2746                                 rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_BASE, temp_word);
2747
2748                                 return_resource(&(resources->p_mem_head), p_mem_node);
2749                         }
2750
2751                         p_mem_node = do_bridge_resource_split(&(temp_resources.p_mem_head), 0x100000);
2752
2753                         /* Check if we were able to split something off */
2754                         if (p_mem_node) {
2755                                 /* First use the temporary node to store
2756                                  * information for the board */
2757                                 hold_p_mem_node->length = p_mem_node->base - hold_p_mem_node->base;
2758
2759                                 /* If we used any, add it to the board's list */
2760                                 if (hold_p_mem_node->length) {
2761                                         hold_p_mem_node->next = func->p_mem_head;
2762                                         func->p_mem_head = hold_p_mem_node;
2763
2764                                         temp_word = (p_mem_node->base - 1) >> 16;
2765                                         rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
2766
2767                                         return_resource(&(resources->p_mem_head), p_mem_node);
2768                                 } else {
2769                                         /* it doesn't need any PMem */
2770                                         temp_word = 0x0000;
2771                                         rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
2772
2773                                         return_resource(&(resources->p_mem_head), p_mem_node);
2774                                         kfree(hold_p_mem_node);
2775                                 }
2776                         } else {
2777                                 /* it used the most of the range */
2778                                 hold_p_mem_node->next = func->p_mem_head;
2779                                 func->p_mem_head = hold_p_mem_node;
2780                         }
2781                 } else if (hold_p_mem_node) {
2782                         /* it used the whole range */
2783                         hold_p_mem_node->next = func->p_mem_head;
2784                         func->p_mem_head = hold_p_mem_node;
2785                 }
2786                 /* We should be configuring an IRQ and the bridge's base address
2787                  * registers if it needs them.  Although we have never seen such
2788                  * a device */
2789
2790                 /* enable card */
2791                 command = 0x0157;       /* = PCI_COMMAND_IO |
2792                                          *   PCI_COMMAND_MEMORY |
2793                                          *   PCI_COMMAND_MASTER |
2794                                          *   PCI_COMMAND_INVALIDATE |
2795                                          *   PCI_COMMAND_PARITY |
2796                                          *   PCI_COMMAND_SERR */
2797                 rc = pci_bus_write_config_word (pci_bus, devfn, PCI_COMMAND, command);
2798
2799                 /* set Bridge Control Register */
2800                 command = 0x07;         /* = PCI_BRIDGE_CTL_PARITY |
2801                                          *   PCI_BRIDGE_CTL_SERR |
2802                                          *   PCI_BRIDGE_CTL_NO_ISA */
2803                 rc = pci_bus_write_config_word (pci_bus, devfn, PCI_BRIDGE_CONTROL, command);
2804         } else if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_NORMAL) {
2805                 /* Standard device */
2806                 rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code);
2807
2808                 if (class_code == PCI_BASE_CLASS_DISPLAY) {
2809                         /* Display (video) adapter (not supported) */
2810                         return DEVICE_TYPE_NOT_SUPPORTED;
2811                 }
2812                 /* Figure out IO and memory needs */
2813                 for (cloop = 0x10; cloop <= 0x24; cloop += 4) {
2814                         temp_register = 0xFFFFFFFF;
2815
2816                         dbg("CND: bus=%d, devfn=%d, offset=%d\n", pci_bus->number, devfn, cloop);
2817                         rc = pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register);
2818
2819                         rc = pci_bus_read_config_dword (pci_bus, devfn, cloop, &temp_register);
2820                         dbg("CND: base = 0x%x\n", temp_register);
2821
2822                         if (temp_register) {      /* If this register is implemented */
2823                                 if ((temp_register & 0x03L) == 0x01) {
2824                                         /* Map IO */
2825
2826                                         /* set base = amount of IO space */
2827                                         base = temp_register & 0xFFFFFFFC;
2828                                         base = ~base + 1;
2829
2830                                         dbg("CND:      length = 0x%x\n", base);
2831                                         io_node = get_io_resource(&(resources->io_head), base);
2832                                         dbg("Got io_node start = %8.8x, length = %8.8x next (%p)\n",
2833                                             io_node->base, io_node->length, io_node->next);
2834                                         dbg("func (%p) io_head (%p)\n", func, func->io_head);
2835
2836                                         /* allocate the resource to the board */
2837                                         if (io_node) {
2838                                                 base = io_node->base;
2839
2840                                                 io_node->next = func->io_head;
2841                                                 func->io_head = io_node;
2842                                         } else
2843                                                 return -ENOMEM;
2844                                 } else if ((temp_register & 0x0BL) == 0x08) {
2845                                         /* Map prefetchable memory */
2846                                         base = temp_register & 0xFFFFFFF0;
2847                                         base = ~base + 1;
2848
2849                                         dbg("CND:      length = 0x%x\n", base);
2850                                         p_mem_node = get_resource(&(resources->p_mem_head), base);
2851
2852                                         /* allocate the resource to the board */
2853                                         if (p_mem_node) {
2854                                                 base = p_mem_node->base;
2855
2856                                                 p_mem_node->next = func->p_mem_head;
2857                                                 func->p_mem_head = p_mem_node;
2858                                         } else
2859                                                 return -ENOMEM;
2860                                 } else if ((temp_register & 0x0BL) == 0x00) {
2861                                         /* Map memory */
2862                                         base = temp_register & 0xFFFFFFF0;
2863                                         base = ~base + 1;
2864
2865                                         dbg("CND:      length = 0x%x\n", base);
2866                                         mem_node = get_resource(&(resources->mem_head), base);
2867
2868                                         /* allocate the resource to the board */
2869                                         if (mem_node) {
2870                                                 base = mem_node->base;
2871
2872                                                 mem_node->next = func->mem_head;
2873                                                 func->mem_head = mem_node;
2874                                         } else
2875                                                 return -ENOMEM;
2876                                 } else {
2877                                         /* Reserved bits or requesting space below 1M */
2878                                         return NOT_ENOUGH_RESOURCES;
2879                                 }
2880
2881                                 rc = pci_bus_write_config_dword(pci_bus, devfn, cloop, base);
2882
2883                                 /* Check for 64-bit base */
2884                                 if ((temp_register & 0x07L) == 0x04) {
2885                                         cloop += 4;
2886
2887                                         /* Upper 32 bits of address always zero
2888                                          * on today's systems */
2889                                         /* FIXME this is probably not true on
2890                                          * Alpha and ia64??? */
2891                                         base = 0;
2892                                         rc = pci_bus_write_config_dword(pci_bus, devfn, cloop, base);
2893                                 }
2894                         }
2895                 }               /* End of base register loop */
2896                 if (cpqhp_legacy_mode) {
2897                         /* Figure out which interrupt pin this function uses */
2898                         rc = pci_bus_read_config_byte (pci_bus, devfn,
2899                                 PCI_INTERRUPT_PIN, &temp_byte);
2900
2901                         /* If this function needs an interrupt and we are behind
2902                          * a bridge and the pin is tied to something that's
2903                          * already mapped, set this one the same */
2904                         if (temp_byte && resources->irqs &&
2905                             (resources->irqs->valid_INT &
2906                              (0x01 << ((temp_byte + resources->irqs->barber_pole - 1) & 0x03)))) {
2907                                 /* We have to share with something already set up */
2908                                 IRQ = resources->irqs->interrupt[(temp_byte +
2909                                         resources->irqs->barber_pole - 1) & 0x03];
2910                         } else {
2911                                 /* Program IRQ based on card type */
2912                                 rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code);
2913
2914                                 if (class_code == PCI_BASE_CLASS_STORAGE)
2915                                         IRQ = cpqhp_disk_irq;
2916                                 else
2917                                         IRQ = cpqhp_nic_irq;
2918                         }
2919
2920                         /* IRQ Line */
2921                         rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_INTERRUPT_LINE, IRQ);
2922                 }
2923
2924                 if (!behind_bridge) {
2925                         rc = cpqhp_set_irq(func->bus, func->device, temp_byte, IRQ);
2926                         if (rc)
2927                                 return 1;
2928                 } else {
2929                         /* TBD - this code may also belong in the other clause
2930                          * of this If statement */
2931                         resources->irqs->interrupt[(temp_byte + resources->irqs->barber_pole - 1) & 0x03] = IRQ;
2932                         resources->irqs->valid_INT |= 0x01 << (temp_byte + resources->irqs->barber_pole - 1) & 0x03;
2933                 }
2934
2935                 /* Latency Timer */
2936                 temp_byte = 0x40;
2937                 rc = pci_bus_write_config_byte(pci_bus, devfn,
2938                                         PCI_LATENCY_TIMER, temp_byte);
2939
2940                 /* Cache Line size */
2941                 temp_byte = 0x08;
2942                 rc = pci_bus_write_config_byte(pci_bus, devfn,
2943                                         PCI_CACHE_LINE_SIZE, temp_byte);
2944
2945                 /* disable ROM base Address */
2946                 temp_dword = 0x00L;
2947                 rc = pci_bus_write_config_word(pci_bus, devfn,
2948                                         PCI_ROM_ADDRESS, temp_dword);
2949
2950                 /* enable card */
2951                 temp_word = 0x0157;     /* = PCI_COMMAND_IO |
2952                                          *   PCI_COMMAND_MEMORY |
2953                                          *   PCI_COMMAND_MASTER |
2954                                          *   PCI_COMMAND_INVALIDATE |
2955                                          *   PCI_COMMAND_PARITY |
2956                                          *   PCI_COMMAND_SERR */
2957                 rc = pci_bus_write_config_word (pci_bus, devfn,
2958                                         PCI_COMMAND, temp_word);
2959         } else {                /* End of Not-A-Bridge else */
2960                 /* It's some strange type of PCI adapter (Cardbus?) */
2961                 return DEVICE_TYPE_NOT_SUPPORTED;
2962         }
2963
2964         func->configured = 1;
2965
2966         return 0;
2967 free_and_out:
2968         cpqhp_destroy_resource_list (&temp_resources);
2969
2970         return_resource(&(resources-> bus_head), hold_bus_node);
2971         return_resource(&(resources-> io_head), hold_IO_node);
2972         return_resource(&(resources-> mem_head), hold_mem_node);
2973         return_resource(&(resources-> p_mem_head), hold_p_mem_node);
2974         return rc;
2975 }