Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
[linux-drm-fsl-dcu.git] / drivers / net / irda / smsc-ircc2.h
1 /*********************************************************************
2  *
3  * Description:   Definitions for the SMC IrCC chipset
4  * Status:        Experimental.
5  * Author:        Daniele Peri (peri@csai.unipa.it)
6  *
7  *     Copyright (c) 2002      Daniele Peri
8  *     All Rights Reserved.
9  *
10  * Based on smc-ircc.h:
11  *
12  *     Copyright (c) 1999-2000, Dag Brattli <dagb@cs.uit.no>
13  *     Copyright (c) 1998-1999, Thomas Davis (tadavis@jps.net>
14  *     All Rights Reserved
15  *
16  *
17  *     This program is free software; you can redistribute it and/or
18  *     modify it under the terms of the GNU General Public License as
19  *     published by the Free Software Foundation; either version 2 of
20  *     the License, or (at your option) any later version.
21  *
22  *     This program is distributed in the hope that it will be useful,
23  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
24  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
25  *     GNU General Public License for more details.
26  *
27  *     You should have received a copy of the GNU General Public License
28  *     along with this program; if not, see <http://www.gnu.org/licenses/>.
29  *
30  ********************************************************************/
31
32 #ifndef SMSC_IRCC2_H
33 #define SMSC_IRCC2_H
34
35 /* DMA modes needed */
36 #define DMA_TX_MODE                0x08    /* Mem to I/O, ++, demand. */
37 #define DMA_RX_MODE                0x04    /* I/O to mem, ++, demand. */
38
39 /* Master Control Register */
40 #define IRCC_MASTER                0x07
41 #define   IRCC_MASTER_POWERDOWN    0x80
42 #define   IRCC_MASTER_RESET        0x40
43 #define   IRCC_MASTER_INT_EN       0x20
44 #define   IRCC_MASTER_ERROR_RESET  0x10
45
46 /* Register block 0 */
47
48 /* Interrupt Identification */
49 #define IRCC_IIR                                        0x01
50 #define   IRCC_IIR_ACTIVE_FRAME         0x80
51 #define   IRCC_IIR_EOM                          0x40
52 #define   IRCC_IIR_RAW_MODE                     0x20
53 #define   IRCC_IIR_FIFO                         0x10
54
55 /* Interrupt Enable */
56 #define IRCC_IER                                        0x02
57 #define   IRCC_IER_ACTIVE_FRAME         0x80
58 #define   IRCC_IER_EOM                          0x40
59 #define   IRCC_IER_RAW_MODE                     0x20
60 #define   IRCC_IER_FIFO                         0x10
61
62 /* Line Status Register */
63 #define IRCC_LSR                                        0x03
64 #define   IRCC_LSR_UNDERRUN                     0x80
65 #define   IRCC_LSR_OVERRUN                      0x40
66 #define   IRCC_LSR_FRAME_ERROR          0x20
67 #define   IRCC_LSR_SIZE_ERROR           0x10
68 #define   IRCC_LSR_CRC_ERROR            0x80
69 #define   IRCC_LSR_FRAME_ABORT          0x40
70
71 /* Line Status Address Register */
72 #define IRCC_LSAR                                       0x03
73 #define IRCC_LSAR_ADDRESS_MASK          0x07
74
75 /* Line Control Register A */
76 #define IRCC_LCR_A                 0x04
77 #define   IRCC_LCR_A_FIFO_RESET    0x80
78 #define   IRCC_LCR_A_FAST          0x40
79 #define   IRCC_LCR_A_GP_DATA       0x20
80 #define   IRCC_LCR_A_RAW_TX        0x10
81 #define   IRCC_LCR_A_RAW_RX        0x08
82 #define   IRCC_LCR_A_ABORT         0x04
83 #define   IRCC_LCR_A_DATA_DONE     0x02
84
85 /* Line Control Register B */
86 #define IRCC_LCR_B                 0x05
87 #define   IRCC_LCR_B_SCE_DISABLED  0x00
88 #define   IRCC_LCR_B_SCE_TRANSMIT  0x40
89 #define   IRCC_LCR_B_SCE_RECEIVE   0x80
90 #define   IRCC_LCR_B_SCE_UNDEFINED 0xc0
91 #define   IRCC_LCR_B_SIP_ENABLE    0x20
92 #define   IRCC_LCR_B_BRICK_WALL    0x10
93
94 /* Bus Status Register */
95 #define IRCC_BSR                   0x06
96 #define   IRCC_BSR_NOT_EMPTY       0x80
97 #define   IRCC_BSR_FIFO_FULL       0x40
98 #define   IRCC_BSR_TIMEOUT         0x20
99
100 /* Register block 1 */
101
102 #define IRCC_FIFO_THRESHOLD                     0x02
103
104 #define IRCC_SCE_CFGA                           0x00
105 #define   IRCC_CFGA_AUX_IR                      0x80
106 #define   IRCC_CFGA_HALF_DUPLEX         0x04
107 #define   IRCC_CFGA_TX_POLARITY         0x02
108 #define   IRCC_CFGA_RX_POLARITY         0x01
109
110 #define   IRCC_CFGA_COM                         0x00
111 #define         IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK      0x87
112 #define         IRCC_CFGA_IRDA_SIR_A    0x08
113 #define         IRCC_CFGA_ASK_SIR               0x10
114 #define         IRCC_CFGA_IRDA_SIR_B    0x18
115 #define         IRCC_CFGA_IRDA_HDLC             0x20
116 #define         IRCC_CFGA_IRDA_4PPM             0x28
117 #define         IRCC_CFGA_CONSUMER              0x30
118 #define         IRCC_CFGA_RAW_IR                0x38
119 #define     IRCC_CFGA_OTHER                     0x40
120
121 #define IRCC_IR_HDLC               0x04
122 #define IRCC_IR_4PPM               0x01
123 #define IRCC_IR_CONSUMER           0x02
124
125 #define IRCC_SCE_CFGB              0x01
126 #define IRCC_CFGB_LOOPBACK         0x20
127 #define IRCC_CFGB_LPBCK_TX_CRC     0x10
128 #define IRCC_CFGB_NOWAIT           0x08
129 #define IRCC_CFGB_STRING_MOVE      0x04
130 #define IRCC_CFGB_DMA_BURST        0x02
131 #define IRCC_CFGB_DMA_ENABLE       0x01
132
133 #define IRCC_CFGB_MUX_COM          0x00
134 #define IRCC_CFGB_MUX_IR           0x40
135 #define IRCC_CFGB_MUX_AUX          0x80
136 #define IRCC_CFGB_MUX_INACTIVE     0xc0
137
138 /* Register block 3 - Identification Registers! */
139 #define IRCC_ID_HIGH               0x00   /* 0x10 */
140 #define IRCC_ID_LOW                0x01   /* 0xB8 */
141 #define IRCC_CHIP_ID               0x02   /* 0xF1 */
142 #define IRCC_VERSION               0x03   /* 0x01 */
143 #define IRCC_INTERFACE             0x04   /* low 4 = DMA, high 4 = IRQ */
144 #define         IRCC_INTERFACE_DMA_MASK 0x0F   /* low 4 = DMA, high 4 = IRQ */
145 #define         IRCC_INTERFACE_IRQ_MASK 0xF0   /* low 4 = DMA, high 4 = IRQ */
146
147 /* Register block 4 - IrDA */
148 #define IRCC_CONTROL               0x00
149 #define IRCC_BOF_COUNT_LO          0x01 /* Low byte */
150 #define IRCC_BOF_COUNT_HI          0x00 /* High nibble (bit 0-3) */
151 #define IRCC_BRICKWALL_CNT_LO      0x02 /* Low byte */
152 #define IRCC_BRICKWALL_CNT_HI      0x03 /* High nibble (bit 4-7) */
153 #define IRCC_TX_SIZE_LO            0x04 /* Low byte */
154 #define IRCC_TX_SIZE_HI            0x03 /* High nibble (bit 0-3) */
155 #define IRCC_RX_SIZE_HI            0x05 /* High nibble (bit 0-3) */
156 #define IRCC_RX_SIZE_LO            0x06 /* Low byte */
157
158 #define IRCC_1152                  0x80
159 #define IRCC_CRC                   0x40
160
161 /* Register block 5 - IrDA */
162 #define IRCC_ATC                                        0x00
163 #define         IRCC_ATC_nPROGREADY             0x80
164 #define         IRCC_ATC_SPEED                  0x40
165 #define         IRCC_ATC_ENABLE                 0x20
166 #define         IRCC_ATC_MASK                   0xE0
167
168
169 #define IRCC_IRHALFDUPLEX_TIMEOUT       0x01
170
171 #define IRCC_SCE_TX_DELAY_TIMER         0x02
172
173 /*
174  * Other definitions
175  */
176
177 #define SMSC_IRCC2_MAX_SIR_SPEED                115200
178 #define SMSC_IRCC2_FIR_CHIP_IO_EXTENT   8
179 #define SMSC_IRCC2_SIR_CHIP_IO_EXTENT   8
180 #define SMSC_IRCC2_FIFO_SIZE                    16
181 #define SMSC_IRCC2_FIFO_THRESHOLD               64
182 /* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */
183 #define SMSC_IRCC2_RX_BUFF_TRUESIZE             14384
184 #define SMSC_IRCC2_TX_BUFF_TRUESIZE             14384
185 #define SMSC_IRCC2_MIN_TURN_TIME                0x07
186 #define SMSC_IRCC2_WINDOW_SIZE                  0x07
187 /* Maximum wait for hw transmitter to finish */
188 #define SMSC_IRCC2_HW_TRANSMITTER_TIMEOUT_US    1000    /* 1 ms */
189 /* Maximum wait for ATC transceiver programming to finish */
190 #define SMSC_IRCC2_ATC_PROGRAMMING_TIMEOUT_JIFFIES 1
191 #endif /* SMSC_IRCC2_H */