drivers/isdn/i4l/isdn_tty.c

   1 /* $Id: isdn_tty.c,v 1.1.2.3 2004/02/10 01:07:13 keil Exp $
   2  *
   3  * Linux ISDN subsystem, tty functions and AT-command emulator (linklevel).
   4  *
   5  * Copyright 1994-1999  by Fritz Elfert (fritz@isdn4linux.de)
   6  * Copyright 1995,96    by Thinking Objects Software GmbH Wuerzburg
   7  *
   8  * This software may be used and distributed according to the terms
   9  * of the GNU General Public License, incorporated herein by reference.
  10  *
  11  */
  12 #undef ISDN_TTY_STAT_DEBUG
  13
  14 #include <linux/isdn.h>
  15 #include <linux/delay.h>
  16 #include "isdn_common.h"
  17 #include "isdn_tty.h"
  18 #ifdef CONFIG_ISDN_AUDIO
  19 #include "isdn_audio.h"
  20 #define VBUF 0x3e0
  21 #define VBUFX (VBUF/16)
  22 #endif
  23
  24 #define FIX_FILE_TRANSFER
  25 #define DUMMY_HAYES_AT
  26
  27 /* Prototypes */
  28
  29 static int isdn_tty_edit_at(const char *, int, modem_info *);
  30 static void isdn_tty_check_esc(const u_char *, u_char, int, int *, u_long *);
  31 static void isdn_tty_modem_reset_regs(modem_info *, int);
  32 static void isdn_tty_cmd_ATA(modem_info *);
  33 static void isdn_tty_flush_buffer(struct tty_struct *);
  34 static void isdn_tty_modem_result(int, modem_info *);
  35 #ifdef CONFIG_ISDN_AUDIO
  36 static int isdn_tty_countDLE(unsigned char *, int);
  37 #endif
  38
  39 /* Leave this unchanged unless you know what you do! */
  40 #define MODEM_PARANOIA_CHECK
  41 #define MODEM_DO_RESTART
  42
  43 static int bit2si[8] =
  44 {1, 5, 7, 7, 7, 7, 7, 7};
  45 static int si2bit[8] =
  46 {4, 1, 4, 4, 4, 4, 4, 4};
  47
  48 char *isdn_tty_revision = "$Revision: 1.1.2.3 $";
  49
  50
  51 /* isdn_tty_try_read() is called from within isdn_tty_rcv_skb()
  52  * to stuff incoming data directly into a tty's flip-buffer. This
  53  * is done to speed up tty-receiving if the receive-queue is empty.
  54  * This routine MUST be called with interrupts off.
  55  * Return:
  56  *  1 = Success
  57  *  0 = Failure, data has to be buffered and later processed by
  58  *      isdn_tty_readmodem().
  59  */
  60 static int
  61 isdn_tty_try_read(modem_info * info, struct sk_buff *skb)
  62 {
  63         int c;
  64         int len;
  65         struct tty_struct *tty;
  66         char last;
  67
  68         if (info->online) {
  69                 if ((tty = info->tty)) {
  70                         if (info->mcr & UART_MCR_RTS) {
  71                                 len = skb->len
  72 #ifdef CONFIG_ISDN_AUDIO
  73                                         + ISDN_AUDIO_SKB_DLECOUNT(skb)
  74 #endif
  75                                         ;
  76
  77                                 c = tty_buffer_request_room(tty, len);
  78                                 if (c >= len) {
  79 #ifdef CONFIG_ISDN_AUDIO
  80                                         if (ISDN_AUDIO_SKB_DLECOUNT(skb)) {
  81                                                 int l = skb->len;
  82                                                 unsigned char *dp = skb->data;
  83                                                 while (--l) {
  84                                                         if (*dp == DLE)
  85                                                                 tty_insert_flip_char(tty, DLE, 0);
  86                                                         tty_insert_flip_char(tty, *dp++, 0);
  87                                                 }
  88                                                 last = *dp;
  89                                         } else {
  90 #endif
  91                                                 if(len > 1)
  92                                                         tty_insert_flip_string(tty, skb->data, len - 1);
  93                                                 last = skb->data[len - 1];
  94 #ifdef CONFIG_ISDN_AUDIO
  95                                         }
  96 #endif
  97                                         if (info->emu.mdmreg[REG_CPPP] & BIT_CPPP)
  98                                                 tty_insert_flip_char(tty, last, 0xFF);
  99                                         else
 100                                                 tty_insert_flip_char(tty, last, TTY_NORMAL);
 101                                         tty_flip_buffer_push(tty);
 102                                         kfree_skb(skb);
 103                                         return 1;
 104                                 }
 105                         }
 106                 }
 107         }
 108         return 0;
 109 }
 110
 111 /* isdn_tty_readmodem() is called periodically from within timer-interrupt.
 112  * It tries getting received data from the receive queue an stuff it into
 113  * the tty's flip-buffer.
 114  */
 115 void
 116 isdn_tty_readmodem(void)
 117 {
 118         int resched = 0;
 119         int midx;
 120         int i;
 121         int r;
 122         struct tty_struct *tty;
 123         modem_info *info;
 124
 125         for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
 126                 if ((midx = dev->m_idx[i]) >= 0) {
 127                         info = &dev->mdm.info[midx];
 128                         if (info->online) {
 129                                 r = 0;
 130 #ifdef CONFIG_ISDN_AUDIO
 131                                 isdn_audio_eval_dtmf(info);
 132                                 if ((info->vonline & 1) && (info->emu.vpar[1]))
 133                                         isdn_audio_eval_silence(info);
 134 #endif
 135                                 if ((tty = info->tty)) {
 136                                         if (info->mcr & UART_MCR_RTS) {
 137                                                 /* CISCO AsyncPPP Hack */
 138                                                 if (!(info->emu.mdmreg[REG_CPPP] & BIT_CPPP))
 139                                                         r = isdn_readbchan_tty(info->isdn_driver, info->isdn_channel, tty, 0);
 140                                                 else
 141                                                         r = isdn_readbchan_tty(info->isdn_driver, info->isdn_channel, tty, 1);
 142                                                 if (r)
 143                                                         tty_flip_buffer_push(tty);
 144                                         } else
 145                                                 r = 1;
 146                                 } else
 147                                         r = 1;
 148                                 if (r) {
 149                                         info->rcvsched = 0;
 150                                         resched = 1;
 151                                 } else
 152                                         info->rcvsched = 1;
 153                         }
 154                 }
 155         }
 156         if (!resched)
 157                 isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 0);
 158 }
 159
 160 int
 161 isdn_tty_rcv_skb(int i, int di, int channel, struct sk_buff *skb)
 162 {
 163         ulong flags;
 164         int midx;
 165 #ifdef CONFIG_ISDN_AUDIO
 166         int ifmt;
 167 #endif
 168         modem_info *info;
 169
 170         if ((midx = dev->m_idx[i]) < 0) {
 171                 /* if midx is invalid, packet is not for tty */
 172                 return 0;
 173         }
 174         info = &dev->mdm.info[midx];
 175 #ifdef CONFIG_ISDN_AUDIO
 176         ifmt = 1;
 177
 178         if ((info->vonline) && (!info->emu.vpar[4]))
 179                 isdn_audio_calc_dtmf(info, skb->data, skb->len, ifmt);
 180         if ((info->vonline & 1) && (info->emu.vpar[1]))
 181                 isdn_audio_calc_silence(info, skb->data, skb->len, ifmt);
 182 #endif
 183         if ((info->online < 2)
 184 #ifdef CONFIG_ISDN_AUDIO
 185             && (!(info->vonline & 1))
 186 #endif
 187                 ) {
 188                 /* If Modem not listening, drop data */
 189                 kfree_skb(skb);
 190                 return 1;
 191         }
 192         if (info->emu.mdmreg[REG_T70] & BIT_T70) {
 193                 if (info->emu.mdmreg[REG_T70] & BIT_T70_EXT) {
 194                         /* T.70 decoding: throw away the T.70 header (2 or 4 bytes)   */
 195                         if (skb->data[0] == 3) /* pure data packet -> 4 byte headers  */
 196                                 skb_pull(skb, 4);
 197                         else
 198                                 if (skb->data[0] == 1) /* keepalive packet -> 2 byte hdr  */
 199                                         skb_pull(skb, 2);
 200                 } else
 201                         /* T.70 decoding: Simply throw away the T.70 header (4 bytes) */
 202                         if ((skb->data[0] == 1) && ((skb->data[1] == 0) || (skb->data[1] == 1)))
 203                                 skb_pull(skb, 4);
 204         }
 205 #ifdef CONFIG_ISDN_AUDIO
 206         ISDN_AUDIO_SKB_DLECOUNT(skb) = 0;
 207         ISDN_AUDIO_SKB_LOCK(skb) = 0;
 208         if (info->vonline & 1) {
 209                 /* voice conversion/compression */
 210                 switch (info->emu.vpar[3]) {
 211                         case 2:
 212                         case 3:
 213                         case 4:
 214                                 /* adpcm
 215                                  * Since compressed data takes less
 216                                  * space, we can overwrite the buffer.
 217                                  */
 218                                 skb_trim(skb, isdn_audio_xlaw2adpcm(info->adpcmr,
 219                                                                     ifmt,
 220                                                                     skb->data,
 221                                                                     skb->data,
 222                                                                     skb->len));
 223                                 break;
 224                         case 5:
 225                                 /* a-law */
 226                                 if (!ifmt)
 227                                         isdn_audio_ulaw2alaw(skb->data, skb->len);
 228                                 break;
 229                         case 6:
 230                                 /* u-law */
 231                                 if (ifmt)
 232                                         isdn_audio_alaw2ulaw(skb->data, skb->len);
 233                                 break;
 234                 }
 235                 ISDN_AUDIO_SKB_DLECOUNT(skb) =
 236                         isdn_tty_countDLE(skb->data, skb->len);
 237         }
 238 #ifdef CONFIG_ISDN_TTY_FAX
 239         else {
 240                 if (info->faxonline & 2) {
 241                         isdn_tty_fax_bitorder(info, skb);
 242                         ISDN_AUDIO_SKB_DLECOUNT(skb) =
 243                                 isdn_tty_countDLE(skb->data, skb->len);
 244                 }
 245         }
 246 #endif
 247 #endif
 248         /* Try to deliver directly via tty-buf if queue is empty */
 249         spin_lock_irqsave(&info->readlock, flags);
 250         if (skb_queue_empty(&dev->drv[di]->rpqueue[channel]))
 251                 if (isdn_tty_try_read(info, skb)) {
 252                         spin_unlock_irqrestore(&info->readlock, flags);
 253                         return 1;
 254                 }
 255         /* Direct deliver failed or queue wasn't empty.
 256          * Queue up for later dequeueing via timer-irq.
 257          */
 258         __skb_queue_tail(&dev->drv[di]->rpqueue[channel], skb);
 259         dev->drv[di]->rcvcount[channel] +=
 260                 (skb->len
 261 #ifdef CONFIG_ISDN_AUDIO
 262                  + ISDN_AUDIO_SKB_DLECOUNT(skb)
 263 #endif
 264                         );
 265         spin_unlock_irqrestore(&info->readlock, flags);
 266         /* Schedule dequeuing */
 267         if ((dev->modempoll) && (info->rcvsched))
 268                 isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 1);
 269         return 1;
 270 }
 271
 272 static void
 273 isdn_tty_cleanup_xmit(modem_info * info)
 274 {
 275         skb_queue_purge(&info->xmit_queue);
 276 #ifdef CONFIG_ISDN_AUDIO
 277         skb_queue_purge(&info->dtmf_queue);
 278 #endif
 279 }
 280
 281 static void
 282 isdn_tty_tint(modem_info * info)
 283 {
 284         struct sk_buff *skb = skb_dequeue(&info->xmit_queue);
 285         int len, slen;
 286
 287         if (!skb)
 288                 return;
 289         len = skb->len;
 290         if ((slen = isdn_writebuf_skb_stub(info->isdn_driver,
 291                                            info->isdn_channel, 1, skb)) == len) {
 292                 struct tty_struct *tty = info->tty;
 293                 info->send_outstanding++;
 294                 info->msr &= ~UART_MSR_CTS;
 295                 info->lsr &= ~UART_LSR_TEMT;
 296                 tty_wakeup(tty);
 297                 return;
 298         }
 299         if (slen < 0) {
 300                 /* Error: no channel, already shutdown, or wrong parameter */
 301                 dev_kfree_skb(skb);
 302                 return;
 303         }
 304         skb_queue_head(&info->xmit_queue, skb);
 305 }
 306
 307 #ifdef CONFIG_ISDN_AUDIO
 308 static int
 309 isdn_tty_countDLE(unsigned char *buf, int len)
 310 {
 311         int count = 0;
 312
 313         while (len--)
 314                 if (*buf++ == DLE)
 315                         count++;
 316         return count;
 317 }
 318
 319 /* This routine is called from within isdn_tty_write() to perform
 320  * DLE-decoding when sending audio-data.
 321  */
 322 static int
 323 isdn_tty_handleDLEdown(modem_info * info, atemu * m, int len)
 324 {
 325         unsigned char *p = &info->xmit_buf[info->xmit_count];
 326         int count = 0;
 327
 328         while (len > 0) {
 329                 if (m->lastDLE) {
 330                         m->lastDLE = 0;
 331                         switch (*p) {
 332                                 case DLE:
 333                                         /* Escape code */
 334                                         if (len > 1)
 335                                                 memmove(p, p + 1, len - 1);
 336                                         p--;
 337                                         count++;
 338                                         break;
 339                                 case ETX:
 340                                         /* End of data */
 341                                         info->vonline |= 4;
 342                                         return count;
 343                                 case DC4:
 344                                         /* Abort RX */
 345                                         info->vonline &= ~1;
 346 #ifdef ISDN_DEBUG_MODEM_VOICE
 347                                         printk(KERN_DEBUG
 348                                                "DLEdown: got DLE-DC4, send DLE-ETX on ttyI%d\n",
 349                                                info->line);
 350 #endif
 351                                         isdn_tty_at_cout("\020\003", info);
 352                                         if (!info->vonline) {
 353 #ifdef ISDN_DEBUG_MODEM_VOICE
 354                                                 printk(KERN_DEBUG
 355                                                        "DLEdown: send VCON on ttyI%d\n",
 356                                                        info->line);
 357 #endif
 358                                                 isdn_tty_at_cout("\r\nVCON\r\n", info);
 359                                         }
 360                                         /* Fall through */
 361                                 case 'q':
 362                                 case 's':
 363                                         /* Silence */
 364                                         if (len > 1)
 365                                                 memmove(p, p + 1, len - 1);
 366                                         p--;
 367                                         break;
 368                         }
 369                 } else {
 370                         if (*p == DLE)
 371                                 m->lastDLE = 1;
 372                         else
 373                                 count++;
 374                 }
 375                 p++;
 376                 len--;
 377         }
 378         if (len < 0) {
 379                 printk(KERN_WARNING "isdn_tty: len<0 in DLEdown\n");
 380                 return 0;
 381         }
 382         return count;
 383 }
 384
 385 /* This routine is called from within isdn_tty_write() when receiving
 386  * audio-data. It interrupts receiving, if an character other than
 387  * ^S or ^Q is sent.
 388  */
 389 static int
 390 isdn_tty_end_vrx(const char *buf, int c)
 391 {
 392         char ch;
 393
 394         while (c--) {
 395                 ch = *buf;
 396                 if ((ch != 0x11) && (ch != 0x13))
 397                         return 1;
 398                 buf++;
 399         }
 400         return 0;
 401 }
 402
 403 static int voice_cf[7] =
 404 {0, 0, 4, 3, 2, 0, 0};
 405
 406 #endif                          /* CONFIG_ISDN_AUDIO */
 407
 408 /* isdn_tty_senddown() is called either directly from within isdn_tty_write()
 409  * or via timer-interrupt from within isdn_tty_modem_xmit(). It pulls
 410  * outgoing data from the tty's xmit-buffer, handles voice-decompression or
 411  * T.70 if necessary, and finally queues it up for sending via isdn_tty_tint.
 412  */
 413 static void
 414 isdn_tty_senddown(modem_info * info)
 415 {
 416         int buflen;
 417         int skb_res;
 418 #ifdef CONFIG_ISDN_AUDIO
 419         int audio_len;
 420 #endif
 421         struct sk_buff *skb;
 422
 423 #ifdef CONFIG_ISDN_AUDIO
 424         if (info->vonline & 4) {
 425                 info->vonline &= ~6;
 426                 if (!info->vonline) {
 427 #ifdef ISDN_DEBUG_MODEM_VOICE
 428                         printk(KERN_DEBUG
 429                                "senddown: send VCON on ttyI%d\n",
 430                                info->line);
 431 #endif
 432                         isdn_tty_at_cout("\r\nVCON\r\n", info);
 433                 }
 434         }
 435 #endif
 436         if (!(buflen = info->xmit_count))
 437                 return;
 438         if ((info->emu.mdmreg[REG_CTS] & BIT_CTS) != 0)
 439                 info->msr &= ~UART_MSR_CTS;
 440         info->lsr &= ~UART_LSR_TEMT;
 441         /* info->xmit_count is modified here and in isdn_tty_write().
 442          * So we return here if isdn_tty_write() is in the
 443          * critical section.
 444          */
 445         atomic_inc(&info->xmit_lock);
 446         if (!(atomic_dec_and_test(&info->xmit_lock)))
 447                 return;
 448         if (info->isdn_driver < 0) {
 449                 info->xmit_count = 0;
 450                 return;
 451         }
 452         skb_res = dev->drv[info->isdn_driver]->interface->hl_hdrlen + 4;
 453 #ifdef CONFIG_ISDN_AUDIO
 454         if (info->vonline & 2)
 455                 audio_len = buflen * voice_cf[info->emu.vpar[3]];
 456         else
 457                 audio_len = 0;
 458         skb = dev_alloc_skb(skb_res + buflen + audio_len);
 459 #else
 460         skb = dev_alloc_skb(skb_res + buflen);
 461 #endif
 462         if (!skb) {
 463                 printk(KERN_WARNING
 464                        "isdn_tty: Out of memory in ttyI%d senddown\n",
 465                        info->line);
 466                 return;
 467         }
 468         skb_reserve(skb, skb_res);
 469         memcpy(skb_put(skb, buflen), info->xmit_buf, buflen);
 470         info->xmit_count = 0;
 471 #ifdef CONFIG_ISDN_AUDIO
 472         if (info->vonline & 2) {
 473                 /* For now, ifmt is fixed to 1 (alaw), since this
 474                  * is used with ISDN everywhere in the world, except
 475                  * US, Canada and Japan.
 476                  * Later, when US-ISDN protocols are implemented,
 477                  * this setting will depend on the D-channel protocol.
 478                  */
 479                 int ifmt = 1;
 480
 481                 /* voice conversion/decompression */
 482                 switch (info->emu.vpar[3]) {
 483                         case 2:
 484                         case 3:
 485                         case 4:
 486                                 /* adpcm, compatible to ZyXel 1496 modem
 487                                  * with ROM revision 6.01
 488                                  */
 489                                 audio_len = isdn_audio_adpcm2xlaw(info->adpcms,
 490                                                                   ifmt,
 491                                                                   skb->data,
 492                                                     skb_put(skb, audio_len),
 493                                                                   buflen);
 494                                 skb_pull(skb, buflen);
 495                                 skb_trim(skb, audio_len);
 496                                 break;
 497                         case 5:
 498                                 /* a-law */
 499                                 if (!ifmt)
 500                                         isdn_audio_alaw2ulaw(skb->data,
 501                                                              buflen);
 502                                 break;
 503                         case 6:
 504                                 /* u-law */
 505                                 if (ifmt)
 506                                         isdn_audio_ulaw2alaw(skb->data,
 507                                                              buflen);
 508                                 break;
 509                 }
 510         }
 511 #endif                          /* CONFIG_ISDN_AUDIO */
 512         if (info->emu.mdmreg[REG_T70] & BIT_T70) {
 513                 /* Add T.70 simplified header */
 514                 if (info->emu.mdmreg[REG_T70] & BIT_T70_EXT)
 515                         memcpy(skb_push(skb, 2), "\1\0", 2);
 516                 else
 517                         memcpy(skb_push(skb, 4), "\1\0\1\0", 4);
 518         }
 519         skb_queue_tail(&info->xmit_queue, skb);
 520 }
 521
 522 /************************************************************
 523  *
 524  * Modem-functions
 525  *
 526  * mostly "stolen" from original Linux-serial.c and friends.
 527  *
 528  ************************************************************/
 529
 530 /* The next routine is called once from within timer-interrupt
 531  * triggered within isdn_tty_modem_ncarrier(). It calls
 532  * isdn_tty_modem_result() to stuff a "NO CARRIER" Message
 533  * into the tty's buffer.
 534  */
 535 static void
 536 isdn_tty_modem_do_ncarrier(unsigned long data)
 537 {
 538         modem_info *info = (modem_info *) data;
 539         isdn_tty_modem_result(RESULT_NO_CARRIER, info);
 540 }
 541
 542 /* Next routine is called, whenever the DTR-signal is raised.
 543  * It checks the ncarrier-flag, and triggers the above routine
 544  * when necessary. The ncarrier-flag is set, whenever DTR goes
 545  * low.
 546  */
 547 static void
 548 isdn_tty_modem_ncarrier(modem_info * info)
 549 {
 550         if (info->ncarrier) {
 551                 info->nc_timer.expires = jiffies + HZ;
 552                 add_timer(&info->nc_timer);
 553         }
 554 }
 555
 556 /*
 557  * return the usage calculated by si and layer 2 protocol
 558  */
 559 static int
 560 isdn_calc_usage(int si, int l2)
 561 {
 562         int usg = ISDN_USAGE_MODEM;
 563
 564 #ifdef CONFIG_ISDN_AUDIO
 565         if (si == 1) {
 566                 switch(l2) {
 567                         case ISDN_PROTO_L2_MODEM:
 568                                 usg = ISDN_USAGE_MODEM;
 569                                 break;
 570 #ifdef CONFIG_ISDN_TTY_FAX
 571                         case ISDN_PROTO_L2_FAX:
 572                                 usg = ISDN_USAGE_FAX;
 573                                 break;
 574 #endif
 575                         case ISDN_PROTO_L2_TRANS:
 576                         default:
 577                                 usg = ISDN_USAGE_VOICE;
 578                                 break;
 579                 }
 580         }
 581 #endif
 582         return(usg);
 583 }
 584
 585 /* isdn_tty_dial() performs dialing of a tty an the necessary
 586  * setup of the lower levels before that.
 587  */
 588 static void
 589 isdn_tty_dial(char *n, modem_info * info, atemu * m)
 590 {
 591         int usg = ISDN_USAGE_MODEM;
 592         int si = 7;
 593         int l2 = m->mdmreg[REG_L2PROT];
 594         u_long flags;
 595         isdn_ctrl cmd;
 596         int i;
 597         int j;
 598
 599         for (j = 7; j >= 0; j--)
 600                 if (m->mdmreg[REG_SI1] & (1 << j)) {
 601                         si = bit2si[j];
 602                         break;
 603                 }
 604         usg = isdn_calc_usage(si, l2);
 605 #ifdef CONFIG_ISDN_AUDIO
 606         if ((si == 1) &&
 607                 (l2 != ISDN_PROTO_L2_MODEM)
 608 #ifdef CONFIG_ISDN_TTY_FAX
 609                 && (l2 != ISDN_PROTO_L2_FAX)
 610 #endif
 611                 ) {
 612                 l2 = ISDN_PROTO_L2_TRANS;
 613                 usg = ISDN_USAGE_VOICE;
 614         }
 615 #endif
 616         m->mdmreg[REG_SI1I] = si2bit[si];
 617         spin_lock_irqsave(&dev->lock, flags);
 618         i = isdn_get_free_channel(usg, l2, m->mdmreg[REG_L3PROT], -1, -1, m->msn);
 619         if (i < 0) {
 620                 spin_unlock_irqrestore(&dev->lock, flags);
 621                 isdn_tty_modem_result(RESULT_NO_DIALTONE, info);
 622         } else {
 623                 info->isdn_driver = dev->drvmap[i];
 624                 info->isdn_channel = dev->chanmap[i];
 625                 info->drv_index = i;
 626                 dev->m_idx[i] = info->line;
 627                 dev->usage[i] |= ISDN_USAGE_OUTGOING;
 628                 info->last_dir = 1;
 629                 strcpy(info->last_num, n);
 630                 isdn_info_update();
 631                 spin_unlock_irqrestore(&dev->lock, flags);
 632                 cmd.driver = info->isdn_driver;
 633                 cmd.arg = info->isdn_channel;
 634                 cmd.command = ISDN_CMD_CLREAZ;
 635                 isdn_command(&cmd);
 636                 strcpy(cmd.parm.num, isdn_map_eaz2msn(m->msn, info->isdn_driver));
 637                 cmd.driver = info->isdn_driver;
 638                 cmd.command = ISDN_CMD_SETEAZ;
 639                 isdn_command(&cmd);
 640                 cmd.driver = info->isdn_driver;
 641                 cmd.command = ISDN_CMD_SETL2;
 642                 info->last_l2 = l2;
 643                 cmd.arg = info->isdn_channel + (l2 << 8);
 644                 isdn_command(&cmd);
 645                 cmd.driver = info->isdn_driver;
 646                 cmd.command = ISDN_CMD_SETL3;
 647                 cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8);
 648 #ifdef CONFIG_ISDN_TTY_FAX
 649                 if (l2 == ISDN_PROTO_L2_FAX) {
 650                         cmd.parm.fax = info->fax;
 651                         info->fax->direction = ISDN_TTY_FAX_CONN_OUT;
 652                 }
 653 #endif
 654                 isdn_command(&cmd);
 655                 cmd.driver = info->isdn_driver;
 656                 cmd.arg = info->isdn_channel;
 657                 sprintf(cmd.parm.setup.phone, "%s", n);
 658                 sprintf(cmd.parm.setup.eazmsn, "%s",
 659                         isdn_map_eaz2msn(m->msn, info->isdn_driver));
 660                 cmd.parm.setup.si1 = si;
 661                 cmd.parm.setup.si2 = m->mdmreg[REG_SI2];
 662                 cmd.command = ISDN_CMD_DIAL;
 663                 info->dialing = 1;
 664                 info->emu.carrierwait = 0;
 665                 strcpy(dev->num[i], n);
 666                 isdn_info_update();
 667                 isdn_command(&cmd);
 668                 isdn_timer_ctrl(ISDN_TIMER_CARRIER, 1);
 669         }
 670 }
 671
 672 /* isdn_tty_hangup() disassociates a tty from the real
 673  * ISDN-line (hangup). The usage-status is cleared
 674  * and some cleanup is done also.
 675  */
 676 void
 677 isdn_tty_modem_hup(modem_info * info, int local)
 678 {
 679         isdn_ctrl cmd;
 680         int di, ch;
 681
 682         if (!info)
 683                 return;
 684
 685         di = info->isdn_driver;
 686         ch = info->isdn_channel;
 687         if (di < 0 || ch < 0)
 688                 return;
 689
 690         info->isdn_driver = -1;
 691         info->isdn_channel = -1;
 692
 693 #ifdef ISDN_DEBUG_MODEM_HUP
 694         printk(KERN_DEBUG "Mhup ttyI%d\n", info->line);
 695 #endif
 696         info->rcvsched = 0;
 697         isdn_tty_flush_buffer(info->tty);
 698         if (info->online) {
 699                 info->last_lhup = local;
 700                 info->online = 0;
 701                 isdn_tty_modem_result(RESULT_NO_CARRIER, info);
 702         }
 703 #ifdef CONFIG_ISDN_AUDIO
 704         info->vonline = 0;
 705 #ifdef CONFIG_ISDN_TTY_FAX
 706         info->faxonline = 0;
 707         info->fax->phase = ISDN_FAX_PHASE_IDLE;
 708 #endif
 709         info->emu.vpar[4] = 0;
 710         info->emu.vpar[5] = 8;
 711         kfree(info->dtmf_state);
 712         info->dtmf_state = NULL;
 713         kfree(info->silence_state);
 714         info->silence_state = NULL;
 715         kfree(info->adpcms);
 716         info->adpcms = NULL;
 717         kfree(info->adpcmr);
 718         info->adpcmr = NULL;
 719 #endif
 720         if ((info->msr & UART_MSR_RI) &&
 721                 (info->emu.mdmreg[REG_RUNG] & BIT_RUNG))
 722                 isdn_tty_modem_result(RESULT_RUNG, info);
 723         info->msr &= ~(UART_MSR_DCD | UART_MSR_RI);
 724         info->lsr |= UART_LSR_TEMT;
 725
 726         if (local) {
 727                 cmd.driver = di;
 728                 cmd.command = ISDN_CMD_HANGUP;
 729                 cmd.arg = ch;
 730                 isdn_command(&cmd);
 731         }
 732
 733         isdn_all_eaz(di, ch);
 734         info->emu.mdmreg[REG_RINGCNT] = 0;
 735         isdn_free_channel(di, ch, 0);
 736
 737         if (info->drv_index >= 0) {
 738                 dev->m_idx[info->drv_index] = -1;
 739                 info->drv_index = -1;
 740         }
 741 }
 742
 743 /*
 744  * Begin of a CAPI like interface, currently used only for
 745  * supplementary service (CAPI 2.0 part III)
 746  */
 747 #include <linux/isdn/capicmd.h>
 748
 749 int
 750 isdn_tty_capi_facility(capi_msg *cm) {
 751         return(-1); /* dummy */
 752 }
 753
 754 /* isdn_tty_suspend() tries to suspend the current tty connection
 755  */
 756 static void
 757 isdn_tty_suspend(char *id, modem_info * info, atemu * m)
 758 {
 759         isdn_ctrl cmd;
 760
 761         int l;
 762
 763         if (!info)
 764                 return;
 765
 766 #ifdef ISDN_DEBUG_MODEM_SERVICES
 767         printk(KERN_DEBUG "Msusp ttyI%d\n", info->line);
 768 #endif
 769         l = strlen(id);
 770         if ((info->isdn_driver >= 0)) {
 771                 cmd.parm.cmsg.Length = l+18;
 772                 cmd.parm.cmsg.Command = CAPI_FACILITY;
 773                 cmd.parm.cmsg.Subcommand = CAPI_REQ;
 774                 cmd.parm.cmsg.adr.Controller = info->isdn_driver + 1;
 775                 cmd.parm.cmsg.para[0] = 3; /* 16 bit 0x0003 suplementary service */
 776                 cmd.parm.cmsg.para[1] = 0;
 777                 cmd.parm.cmsg.para[2] = l + 3;
 778                 cmd.parm.cmsg.para[3] = 4; /* 16 bit 0x0004 Suspend */
 779                 cmd.parm.cmsg.para[4] = 0;
 780                 cmd.parm.cmsg.para[5] = l;
 781                 strncpy(&cmd.parm.cmsg.para[6], id, l);
 782                 cmd.command = CAPI_PUT_MESSAGE;
 783                 cmd.driver = info->isdn_driver;
 784                 cmd.arg = info->isdn_channel;
 785                 isdn_command(&cmd);
 786         }
 787 }
 788
 789 /* isdn_tty_resume() tries to resume a suspended call
 790  * setup of the lower levels before that. unfortunatly here is no
 791  * checking for compatibility of used protocols implemented by Q931
 792  * It does the same things like isdn_tty_dial, the last command
 793  * is different, may be we can merge it.
 794  */
 795
 796 static void
 797 isdn_tty_resume(char *id, modem_info * info, atemu * m)
 798 {
 799         int usg = ISDN_USAGE_MODEM;
 800         int si = 7;
 801         int l2 = m->mdmreg[REG_L2PROT];
 802         isdn_ctrl cmd;
 803         ulong flags;
 804         int i;
 805         int j;
 806         int l;
 807
 808         l = strlen(id);
 809         for (j = 7; j >= 0; j--)
 810                 if (m->mdmreg[REG_SI1] & (1 << j)) {
 811                         si = bit2si[j];
 812                         break;
 813                 }
 814         usg = isdn_calc_usage(si, l2);
 815 #ifdef CONFIG_ISDN_AUDIO
 816         if ((si == 1) &&
 817                 (l2 != ISDN_PROTO_L2_MODEM)
 818 #ifdef CONFIG_ISDN_TTY_FAX
 819                 && (l2 != ISDN_PROTO_L2_FAX)
 820 #endif
 821                 ) {
 822                 l2 = ISDN_PROTO_L2_TRANS;
 823                 usg = ISDN_USAGE_VOICE;
 824         }
 825 #endif
 826         m->mdmreg[REG_SI1I] = si2bit[si];
 827         spin_lock_irqsave(&dev->lock, flags);
 828         i = isdn_get_free_channel(usg, l2, m->mdmreg[REG_L3PROT], -1, -1, m->msn);
 829         if (i < 0) {
 830                 spin_unlock_irqrestore(&dev->lock, flags);
 831                 isdn_tty_modem_result(RESULT_NO_DIALTONE, info);
 832         } else {
 833                 info->isdn_driver = dev->drvmap[i];
 834                 info->isdn_channel = dev->chanmap[i];
 835                 info->drv_index = i;
 836                 dev->m_idx[i] = info->line;
 837                 dev->usage[i] |= ISDN_USAGE_OUTGOING;
 838                 info->last_dir = 1;
 839 //              strcpy(info->last_num, n);
 840                 isdn_info_update();
 841                 spin_unlock_irqrestore(&dev->lock, flags);
 842                 cmd.driver = info->isdn_driver;
 843                 cmd.arg = info->isdn_channel;
 844                 cmd.command = ISDN_CMD_CLREAZ;
 845                 isdn_command(&cmd);
 846                 strcpy(cmd.parm.num, isdn_map_eaz2msn(m->msn, info->isdn_driver));
 847                 cmd.driver = info->isdn_driver;
 848                 cmd.command = ISDN_CMD_SETEAZ;
 849                 isdn_command(&cmd);
 850                 cmd.driver = info->isdn_driver;
 851                 cmd.command = ISDN_CMD_SETL2;
 852                 info->last_l2 = l2;
 853                 cmd.arg = info->isdn_channel + (l2 << 8);
 854                 isdn_command(&cmd);
 855                 cmd.driver = info->isdn_driver;
 856                 cmd.command = ISDN_CMD_SETL3;
 857                 cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8);
 858                 isdn_command(&cmd);
 859                 cmd.driver = info->isdn_driver;
 860                 cmd.arg = info->isdn_channel;
 861                 cmd.parm.cmsg.Length = l+18;
 862                 cmd.parm.cmsg.Command = CAPI_FACILITY;
 863                 cmd.parm.cmsg.Subcommand = CAPI_REQ;
 864                 cmd.parm.cmsg.adr.Controller = info->isdn_driver + 1;
 865                 cmd.parm.cmsg.para[0] = 3; /* 16 bit 0x0003 suplementary service */
 866                 cmd.parm.cmsg.para[1] = 0;
 867                 cmd.parm.cmsg.para[2] = l+3;
 868                 cmd.parm.cmsg.para[3] = 5; /* 16 bit 0x0005 Resume */
 869                 cmd.parm.cmsg.para[4] = 0;
 870                 cmd.parm.cmsg.para[5] = l;
 871                 strncpy(&cmd.parm.cmsg.para[6], id, l);
 872                 cmd.command =CAPI_PUT_MESSAGE;
 873                 info->dialing = 1;
 874 //              strcpy(dev->num[i], n);
 875                 isdn_info_update();
 876                 isdn_command(&cmd);
 877                 isdn_timer_ctrl(ISDN_TIMER_CARRIER, 1);
 878         }
 879 }
 880
 881 /* isdn_tty_send_msg() sends a message to a HL driver
 882  * This is used for hybrid modem cards to send AT commands to it
 883  */
 884
 885 static void
 886 isdn_tty_send_msg(modem_info * info, atemu * m, char *msg)
 887 {
 888         int usg = ISDN_USAGE_MODEM;
 889         int si = 7;
 890         int l2 = m->mdmreg[REG_L2PROT];
 891         isdn_ctrl cmd;
 892         ulong flags;
 893         int i;
 894         int j;
 895         int l;
 896
 897         l = strlen(msg);
 898         if (!l) {
 899                 isdn_tty_modem_result(RESULT_ERROR, info);
 900                 return;
 901         }
 902         for (j = 7; j >= 0; j--)
 903                 if (m->mdmreg[REG_SI1] & (1 << j)) {
 904                         si = bit2si[j];
 905                         break;
 906                 }
 907         usg = isdn_calc_usage(si, l2);
 908 #ifdef CONFIG_ISDN_AUDIO
 909         if ((si == 1) &&
 910                 (l2 != ISDN_PROTO_L2_MODEM)
 911 #ifdef CONFIG_ISDN_TTY_FAX
 912                 && (l2 != ISDN_PROTO_L2_FAX)
 913 #endif
 914                 ) {
 915                 l2 = ISDN_PROTO_L2_TRANS;
 916                 usg = ISDN_USAGE_VOICE;
 917         }
 918 #endif
 919         m->mdmreg[REG_SI1I] = si2bit[si];
 920         spin_lock_irqsave(&dev->lock, flags);
 921         i = isdn_get_free_channel(usg, l2, m->mdmreg[REG_L3PROT], -1, -1, m->msn);
 922         if (i < 0) {
 923                 spin_unlock_irqrestore(&dev->lock, flags);
 924                 isdn_tty_modem_result(RESULT_NO_DIALTONE, info);
 925         } else {
 926                 info->isdn_driver = dev->drvmap[i];
 927                 info->isdn_channel = dev->chanmap[i];
 928                 info->drv_index = i;
 929                 dev->m_idx[i] = info->line;
 930                 dev->usage[i] |= ISDN_USAGE_OUTGOING;
 931                 info->last_dir = 1;
 932                 isdn_info_update();
 933                 spin_unlock_irqrestore(&dev->lock, flags);
 934                 cmd.driver = info->isdn_driver;
 935                 cmd.arg = info->isdn_channel;
 936                 cmd.command = ISDN_CMD_CLREAZ;
 937                 isdn_command(&cmd);
 938                 strcpy(cmd.parm.num, isdn_map_eaz2msn(m->msn, info->isdn_driver));
 939                 cmd.driver = info->isdn_driver;
 940                 cmd.command = ISDN_CMD_SETEAZ;
 941                 isdn_command(&cmd);
 942                 cmd.driver = info->isdn_driver;
 943                 cmd.command = ISDN_CMD_SETL2;
 944                 info->last_l2 = l2;
 945                 cmd.arg = info->isdn_channel + (l2 << 8);
 946                 isdn_command(&cmd);
 947                 cmd.driver = info->isdn_driver;
 948                 cmd.command = ISDN_CMD_SETL3;
 949                 cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8);
 950                 isdn_command(&cmd);
 951                 cmd.driver = info->isdn_driver;
 952                 cmd.arg = info->isdn_channel;
 953                 cmd.parm.cmsg.Length = l+14;
 954                 cmd.parm.cmsg.Command = CAPI_MANUFACTURER;
 955                 cmd.parm.cmsg.Subcommand = CAPI_REQ;
 956                 cmd.parm.cmsg.adr.Controller = info->isdn_driver + 1;
 957                 cmd.parm.cmsg.para[0] = l+1;
 958                 strncpy(&cmd.parm.cmsg.para[1], msg, l);
 959                 cmd.parm.cmsg.para[l+1] = 0xd;
 960                 cmd.command =CAPI_PUT_MESSAGE;
 961 /*              info->dialing = 1;
 962                 strcpy(dev->num[i], n);
 963                 isdn_info_update();
 964 */
 965                 isdn_command(&cmd);
 966         }
 967 }
 968
 969 static inline int
 970 isdn_tty_paranoia_check(modem_info *info, char *name, const char *routine)
 971 {
 972 #ifdef MODEM_PARANOIA_CHECK
 973         if (!info) {
 974                 printk(KERN_WARNING "isdn_tty: null info_struct for %s in %s\n",
 975                         name, routine);
 976                 return 1;
 977         }
 978         if (info->magic != ISDN_ASYNC_MAGIC) {
 979                 printk(KERN_WARNING "isdn_tty: bad magic for modem struct %s in %s\n",
 980                        name, routine);
 981                 return 1;
 982         }
 983 #endif
 984         return 0;
 985 }
 986
 987 /*
 988  * This routine is called to set the UART divisor registers to match
 989  * the specified baud rate for a serial port.
 990  */
 991 static void
 992 isdn_tty_change_speed(modem_info * info)
 993 {
 994         uint cflag,
 995          cval,
 996          fcr,
 997          quot;
 998         int i;
 999
1000         if (!info->tty || !info->tty->termios)
1001                 return;
1002         cflag = info->tty->termios->c_cflag;
1003
1004         quot = i = cflag & CBAUD;
1005         if (i & CBAUDEX) {
1006                 i &= ~CBAUDEX;
1007                 if (i < 1 || i > 2)
1008                         info->tty->termios->c_cflag &= ~CBAUDEX;
1009                 else
1010                         i += 15;
1011         }
1012         if (quot) {
1013                 info->mcr |= UART_MCR_DTR;
1014                 isdn_tty_modem_ncarrier(info);
1015         } else {
1016                 info->mcr &= ~UART_MCR_DTR;
1017                 if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) {
1018 #ifdef ISDN_DEBUG_MODEM_HUP
1019                         printk(KERN_DEBUG "Mhup in changespeed\n");
1020 #endif
1021                         if (info->online)
1022                                 info->ncarrier = 1;
1023                         isdn_tty_modem_reset_regs(info, 0);
1024                         isdn_tty_modem_hup(info, 1);
1025                 }
1026                 return;
1027         }
1028         /* byte size and parity */
1029         cval = cflag & (CSIZE | CSTOPB);
1030         cval >>= 4;
1031         if (cflag & PARENB)
1032                 cval |= UART_LCR_PARITY;
1033         if (!(cflag & PARODD))
1034                 cval |= UART_LCR_EPAR;
1035         fcr = 0;
1036
1037         /* CTS flow control flag and modem status interrupts */
1038         if (cflag & CRTSCTS) {
1039                 info->flags |= ISDN_ASYNC_CTS_FLOW;
1040         } else
1041                 info->flags &= ~ISDN_ASYNC_CTS_FLOW;
1042         if (cflag & CLOCAL)
1043                 info->flags &= ~ISDN_ASYNC_CHECK_CD;
1044         else {
1045                 info->flags |= ISDN_ASYNC_CHECK_CD;
1046         }
1047 }
1048
1049 static int
1050 isdn_tty_startup(modem_info * info)
1051 {
1052         if (info->flags & ISDN_ASYNC_INITIALIZED)
1053                 return 0;
1054         isdn_lock_drivers();
1055 #ifdef ISDN_DEBUG_MODEM_OPEN
1056         printk(KERN_DEBUG "starting up ttyi%d ...\n", info->line);
1057 #endif
1058         /*
1059          * Now, initialize the UART
1060          */
1061         info->mcr = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;
1062         if (info->tty)
1063                 clear_bit(TTY_IO_ERROR, &info->tty->flags);
1064         /*
1065          * and set the speed of the serial port
1066          */
1067         isdn_tty_change_speed(info);
1068
1069         info->flags |= ISDN_ASYNC_INITIALIZED;
1070         info->msr |= (UART_MSR_DSR | UART_MSR_CTS);
1071         info->send_outstanding = 0;
1072         return 0;
1073 }
1074
1075 /*
1076  * This routine will shutdown a serial port; interrupts are disabled, and
1077  * DTR is dropped if the hangup on close termio flag is on.
1078  */
1079 static void
1080 isdn_tty_shutdown(modem_info * info)
1081 {
1082         if (!(info->flags & ISDN_ASYNC_INITIALIZED))
1083                 return;
1084 #ifdef ISDN_DEBUG_MODEM_OPEN
1085         printk(KERN_DEBUG "Shutting down isdnmodem port %d ....\n", info->line);
1086 #endif
1087         isdn_unlock_drivers();
1088         info->msr &= ~UART_MSR_RI;
1089         if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
1090                 info->mcr &= ~(UART_MCR_DTR | UART_MCR_RTS);
1091                 if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) {
1092                         isdn_tty_modem_reset_regs(info, 0);
1093 #ifdef ISDN_DEBUG_MODEM_HUP
1094                         printk(KERN_DEBUG "Mhup in isdn_tty_shutdown\n");
1095 #endif
1096                         isdn_tty_modem_hup(info, 1);
1097                 }
1098         }
1099         if (info->tty)
1100                 set_bit(TTY_IO_ERROR, &info->tty->flags);
1101
1102         info->flags &= ~ISDN_ASYNC_INITIALIZED;
1103 }
1104
1105 /* isdn_tty_write() is the main send-routine. It is called from the upper
1106  * levels within the kernel to perform sending data. Depending on the
1107  * online-flag it either directs output to the at-command-interpreter or
1108  * to the lower level. Additional tasks done here:
1109  *  - If online, check for escape-sequence (+++)
1110  *  - If sending audio-data, call isdn_tty_DLEdown() to parse DLE-codes.
1111  *  - If receiving audio-data, call isdn_tty_end_vrx() to abort if needed.
1112  *  - If dialing, abort dial.
1113  */
1114 static int
1115 isdn_tty_write(struct tty_struct *tty, const u_char * buf, int count)
1116 {
1117         int c;
1118         int total = 0;
1119         modem_info *info = (modem_info *) tty->driver_data;
1120         atemu *m = &info->emu;
1121
1122         if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_write"))
1123                 return 0;
1124         /* See isdn_tty_senddown() */
1125         atomic_inc(&info->xmit_lock);
1126         while (1) {
1127                 c = count;
1128                 if (c > info->xmit_size - info->xmit_count)
1129                         c = info->xmit_size - info->xmit_count;
1130                 if (info->isdn_driver >= 0 && c > dev->drv[info->isdn_driver]->maxbufsize)
1131                         c = dev->drv[info->isdn_driver]->maxbufsize;
1132                 if (c <= 0)
1133                         break;
1134                 if ((info->online > 1)
1135 #ifdef CONFIG_ISDN_AUDIO
1136                     || (info->vonline & 3)
1137 #endif
1138                         ) {
1139 #ifdef CONFIG_ISDN_AUDIO
1140                         if (!info->vonline)
1141 #endif
1142                                 isdn_tty_check_esc(buf, m->mdmreg[REG_ESC], c,
1143                                                    &(m->pluscount),
1144                                                    &(m->lastplus));
1145                         memcpy(&(info->xmit_buf[info->xmit_count]), buf, c);
1146 #ifdef CONFIG_ISDN_AUDIO
1147                         if (info->vonline) {
1148                                 int cc = isdn_tty_handleDLEdown(info, m, c);
1149                                 if (info->vonline & 2) {
1150                                         if (!cc) {
1151                                                 /* If DLE decoding results in zero-transmit, but
1152                                                  * c originally was non-zero, do a wakeup.
1153                                                  */
1154                                                 tty_wakeup(tty);
1155                                                 info->msr |= UART_MSR_CTS;
1156                                                 info->lsr |= UART_LSR_TEMT;
1157                                         }
1158                                         info->xmit_count += cc;
1159                                 }
1160                                 if ((info->vonline & 3) == 1) {
1161                                         /* Do NOT handle Ctrl-Q or Ctrl-S
1162                                          * when in full-duplex audio mode.
1163                                          */
1164                                         if (isdn_tty_end_vrx(buf, c)) {
1165                                                 info->vonline &= ~1;
1166 #ifdef ISDN_DEBUG_MODEM_VOICE
1167                                                 printk(KERN_DEBUG
1168                                                        "got !^Q/^S, send DLE-ETX,VCON on ttyI%d\n",
1169                                                        info->line);
1170 #endif
1171                                                 isdn_tty_at_cout("\020\003\r\nVCON\r\n", info);
1172                                         }
1173                                 }
1174                         } else
1175                         if (TTY_IS_FCLASS1(info)) {
1176                                 int cc = isdn_tty_handleDLEdown(info, m, c);
1177
1178                                 if (info->vonline & 4) { /* ETX seen */
1179                                         isdn_ctrl c;
1180
1181                                         c.command = ISDN_CMD_FAXCMD;
1182                                         c.driver = info->isdn_driver;
1183                                         c.arg = info->isdn_channel;
1184                                         c.parm.aux.cmd = ISDN_FAX_CLASS1_CTRL;
1185                                         c.parm.aux.subcmd = ETX;
1186                                         isdn_command(&c);
1187                                 }
1188                                 info->vonline = 0;
1189 #ifdef ISDN_DEBUG_MODEM_VOICE
1190                                 printk(KERN_DEBUG "fax dle cc/c %d/%d\n", cc, c);
1191 #endif
1192                                 info->xmit_count += cc;
1193                         } else
1194 #endif
1195                                 info->xmit_count += c;
1196                 } else {
1197                         info->msr |= UART_MSR_CTS;
1198                         info->lsr |= UART_LSR_TEMT;
1199                         if (info->dialing) {
1200                                 info->dialing = 0;
1201 #ifdef ISDN_DEBUG_MODEM_HUP
1202                                 printk(KERN_DEBUG "Mhup in isdn_tty_write\n");
1203 #endif
1204                                 isdn_tty_modem_result(RESULT_NO_CARRIER, info);
1205                                 isdn_tty_modem_hup(info, 1);
1206                         } else
1207                                 c = isdn_tty_edit_at(buf, c, info);
1208                 }
1209                 buf += c;
1210                 count -= c;
1211                 total += c;
1212         }
1213         atomic_dec(&info->xmit_lock);
1214         if ((info->xmit_count) || !skb_queue_empty(&info->xmit_queue)) {
1215                 if (m->mdmreg[REG_DXMT] & BIT_DXMT) {
1216                         isdn_tty_senddown(info);
1217                         isdn_tty_tint(info);
1218                 }
1219                 isdn_timer_ctrl(ISDN_TIMER_MODEMXMIT, 1);
1220         }
1221         return total;
1222 }
1223
1224 static int
1225 isdn_tty_write_room(struct tty_struct *tty)
1226 {
1227         modem_info *info = (modem_info *) tty->driver_data;
1228         int ret;
1229
1230         if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_write_room"))
1231                 return 0;
1232         if (!info->online)
1233                 return info->xmit_size;
1234         ret = info->xmit_size - info->xmit_count;
1235         return (ret < 0) ? 0 : ret;
1236 }
1237
1238 static int
1239 isdn_tty_chars_in_buffer(struct tty_struct *tty)
1240 {
1241         modem_info *info = (modem_info *) tty->driver_data;
1242
1243         if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_chars_in_buffer"))
1244                 return 0;
1245         if (!info->online)
1246                 return 0;
1247         return (info->xmit_count);
1248 }
1249
1250 static void
1251 isdn_tty_flush_buffer(struct tty_struct *tty)
1252 {
1253         modem_info *info;
1254
1255         if (!tty) {
1256                 return;
1257         }
1258         info = (modem_info *) tty->driver_data;
1259         if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_flush_buffer")) {
1260                 return;
1261         }
1262         isdn_tty_cleanup_xmit(info);
1263         info->xmit_count = 0;
1264         tty_wakeup(tty);
1265 }
1266
1267 static void
1268 isdn_tty_flush_chars(struct tty_struct *tty)
1269 {
1270         modem_info *info = (modem_info *) tty->driver_data;
1271
1272         if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_flush_chars"))
1273                 return;
1274         if ((info->xmit_count) || !skb_queue_empty(&info->xmit_queue))
1275                 isdn_timer_ctrl(ISDN_TIMER_MODEMXMIT, 1);
1276 }
1277
1278 /*
1279  * ------------------------------------------------------------
1280  * isdn_tty_throttle()
1281  *
1282  * This routine is called by the upper-layer tty layer to signal that
1283  * incoming characters should be throttled.
1284  * ------------------------------------------------------------
1285  */
1286 static void
1287 isdn_tty_throttle(struct tty_struct *tty)
1288 {
1289         modem_info *info = (modem_info *) tty->driver_data;
1290
1291         if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_throttle"))
1292                 return;
1293         if (I_IXOFF(tty))
1294                 info->x_char = STOP_CHAR(tty);
1295         info->mcr &= ~UART_MCR_RTS;
1296 }
1297
1298 static void
1299 isdn_tty_unthrottle(struct tty_struct *tty)
1300 {
1301         modem_info *info = (modem_info *) tty->driver_data;
1302
1303         if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_unthrottle"))
1304                 return;
1305         if (I_IXOFF(tty)) {
1306                 if (info->x_char)
1307                         info->x_char = 0;
1308                 else
1309                         info->x_char = START_CHAR(tty);
1310         }
1311         info->mcr |= UART_MCR_RTS;
1312 }
1313
1314 /*
1315  * ------------------------------------------------------------
1316  * isdn_tty_ioctl() and friends
1317  * ------------------------------------------------------------
1318  */
1319
1320 /*
1321  * isdn_tty_get_lsr_info - get line status register info
1322  *
1323  * Purpose: Let user call ioctl() to get info when the UART physically
1324  *          is emptied.  On bus types like RS485, the transmitter must
1325  *          release the bus after transmitting. This must be done when
1326  *          the transmit shift register is empty, not be done when the
1327  *          transmit holding register is empty.  This functionality
1328  *          allows RS485 driver to be written in user space.
1329  */
1330 static int
1331 isdn_tty_get_lsr_info(modem_info * info, uint __user * value)
1332 {
1333         u_char status;
1334         uint result;
1335
1336         status = info->lsr;
1337         result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
1338         return put_user(result, value);
1339 }
1340
1341
1342 static int
1343 isdn_tty_tiocmget(struct tty_struct *tty, struct file *file)
1344 {
1345         modem_info *info = (modem_info *) tty->driver_data;
1346         u_char control, status;
1347
1348         if (isdn_tty_paranoia_check(info, tty->name, __FUNCTION__))
1349                 return -ENODEV;
1350         if (tty->flags & (1 << TTY_IO_ERROR))
1351                 return -EIO;
1352
1353 #ifdef ISDN_DEBUG_MODEM_IOCTL
1354         printk(KERN_DEBUG "ttyI%d ioctl TIOCMGET\n", info->line);
1355 #endif
1356
1357         control = info->mcr;
1358         status = info->msr;
1359         return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0)
1360             | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0)
1361             | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0)
1362             | ((status & UART_MSR_RI) ? TIOCM_RNG : 0)
1363             | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0)
1364             | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
1365 }
1366
1367 static int
1368 isdn_tty_tiocmset(struct tty_struct *tty, struct file *file,
1369                 unsigned int set, unsigned int clear)
1370 {
1371         modem_info *info = (modem_info *) tty->driver_data;
1372
1373         if (isdn_tty_paranoia_check(info, tty->name, __FUNCTION__))
1374                 return -ENODEV;
1375         if (tty->flags & (1 << TTY_IO_ERROR))
1376                 return -EIO;
1377
1378 #ifdef ISDN_DEBUG_MODEM_IOCTL
1379         printk(KERN_DEBUG "ttyI%d ioctl TIOCMxxx: %x %x\n", info->line, set, clear);
1380 #endif
1381
1382         if (set & TIOCM_RTS)
1383                 info->mcr |= UART_MCR_RTS;
1384         if (set & TIOCM_DTR) {
1385                 info->mcr |= UART_MCR_DTR;
1386                 isdn_tty_modem_ncarrier(info);
1387         }
1388
1389         if (clear & TIOCM_RTS)
1390                 info->mcr &= ~UART_MCR_RTS;
1391         if (clear & TIOCM_DTR) {
1392                 info->mcr &= ~UART_MCR_DTR;
1393                 if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) {
1394                         isdn_tty_modem_reset_regs(info, 0);
1395 #ifdef ISDN_DEBUG_MODEM_HUP
1396                         printk(KERN_DEBUG "Mhup in TIOCMSET\n");
1397 #endif
1398                         if (info->online)
1399                                 info->ncarrier = 1;
1400                         isdn_tty_modem_hup(info, 1);
1401                 }
1402         }
1403         return 0;
1404 }
1405
1406 static int
1407 isdn_tty_ioctl(struct tty_struct *tty, struct file *file,
1408                uint cmd, ulong arg)
1409 {
1410         modem_info *info = (modem_info *) tty->driver_data;
1411         int retval;
1412
1413         if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_ioctl"))
1414                 return -ENODEV;
1415         if (tty->flags & (1 << TTY_IO_ERROR))
1416                 return -EIO;
1417         switch (cmd) {
1418                 case TCSBRK:   /* SVID version: non-zero arg --> no break */
1419 #ifdef ISDN_DEBUG_MODEM_IOCTL
1420                         printk(KERN_DEBUG "ttyI%d ioctl TCSBRK\n", info->line);
1421 #endif
1422                         retval = tty_check_change(tty);
1423                         if (retval)
1424                                 return retval;
1425                         tty_wait_until_sent(tty, 0);
1426                         return 0;
1427                 case TCSBRKP:  /* support for POSIX tcsendbreak() */
1428 #ifdef ISDN_DEBUG_MODEM_IOCTL
1429                         printk(KERN_DEBUG "ttyI%d ioctl TCSBRKP\n", info->line);
1430 #endif
1431                         retval = tty_check_change(tty);
1432                         if (retval)
1433                                 return retval;
1434                         tty_wait_until_sent(tty, 0);
1435                         return 0;
1436                 case TIOCGSOFTCAR:
1437 #ifdef ISDN_DEBUG_MODEM_IOCTL
1438                         printk(KERN_DEBUG "ttyI%d ioctl TIOCGSOFTCAR\n", info->line);
1439 #endif
1440                         return put_user(C_CLOCAL(tty) ? 1 : 0, (ulong __user *) arg);
1441                 case TIOCSSOFTCAR:
1442 #ifdef ISDN_DEBUG_MODEM_IOCTL
1443                         printk(KERN_DEBUG "ttyI%d ioctl TIOCSSOFTCAR\n", info->line);
1444 #endif
1445                         if (get_user(arg, (ulong __user *) arg))
1446                                 return -EFAULT;
1447                         tty->termios->c_cflag =
1448                             ((tty->termios->c_cflag & ~CLOCAL) |
1449                              (arg ? CLOCAL : 0));
1450                         return 0;
1451                 case TIOCSERGETLSR:     /* Get line status register */
1452 #ifdef ISDN_DEBUG_MODEM_IOCTL
1453                         printk(KERN_DEBUG "ttyI%d ioctl TIOCSERGETLSR\n", info->line);
1454 #endif
1455                         return isdn_tty_get_lsr_info(info, (uint __user *) arg);
1456                 default:
1457 #ifdef ISDN_DEBUG_MODEM_IOCTL
1458                         printk(KERN_DEBUG "UNKNOWN ioctl 0x%08x on ttyi%d\n", cmd, info->line);
1459 #endif
1460                         return -ENOIOCTLCMD;
1461         }
1462         return 0;
1463 }
1464
1465 static void
1466 isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
1467 {
1468         modem_info *info = (modem_info *) tty->driver_data;
1469
1470         if (!old_termios)
1471                 isdn_tty_change_speed(info);
1472         else {
1473                 if (tty->termios->c_cflag == old_termios->c_cflag)
1474                         return;
1475                 isdn_tty_change_speed(info);
1476                 if ((old_termios->c_cflag & CRTSCTS) &&
1477                     !(tty->termios->c_cflag & CRTSCTS)) {
1478                         tty->hw_stopped = 0;
1479                 }
1480         }
1481 }
1482
1483 /*
1484  * ------------------------------------------------------------
1485  * isdn_tty_open() and friends
1486  * ------------------------------------------------------------
1487  */
1488 static int
1489 isdn_tty_block_til_ready(struct tty_struct *tty, struct file *filp, modem_info * info)
1490 {
1491         DECLARE_WAITQUEUE(wait, NULL);
1492         int do_clocal = 0;
1493         int retval;
1494
1495         /*
1496          * If the device is in the middle of being closed, then block
1497          * until it's done, and then try again.
1498          */
1499         if (tty_hung_up_p(filp) ||
1500             (info->flags & ISDN_ASYNC_CLOSING)) {
1501                 if (info->flags & ISDN_ASYNC_CLOSING)
1502                         interruptible_sleep_on(&info->close_wait);
1503 #ifdef MODEM_DO_RESTART
1504                 if (info->flags & ISDN_ASYNC_HUP_NOTIFY)
1505                         return -EAGAIN;
1506                 else
1507                         return -ERESTARTSYS;
1508 #else
1509                 return -EAGAIN;
1510 #endif
1511         }
1512         /*
1513          * If non-blocking mode is set, then make the check up front
1514          * and then exit.
1515          */
1516         if ((filp->f_flags & O_NONBLOCK) ||
1517             (tty->flags & (1 << TTY_IO_ERROR))) {
1518                 if (info->flags & ISDN_ASYNC_CALLOUT_ACTIVE)
1519                         return -EBUSY;
1520                 info->flags |= ISDN_ASYNC_NORMAL_ACTIVE;
1521                 return 0;
1522         }
1523         if (info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) {
1524                 if (info->normal_termios.c_cflag & CLOCAL)
1525                         do_clocal = 1;
1526         } else {
1527                 if (tty->termios->c_cflag & CLOCAL)
1528                         do_clocal = 1;
1529         }
1530         /*
1531          * Block waiting for the carrier detect and the line to become
1532          * free (i.e., not in use by the callout).  While we are in
1533          * this loop, info->count is dropped by one, so that
1534          * isdn_tty_close() knows when to free things.  We restore it upon
1535          * exit, either normal or abnormal.
1536          */
1537         retval = 0;
1538         add_wait_queue(&info->open_wait, &wait);
1539 #ifdef ISDN_DEBUG_MODEM_OPEN
1540         printk(KERN_DEBUG "isdn_tty_block_til_ready before block: ttyi%d, count = %d\n",
1541                info->line, info->count);
1542 #endif
1543         if (!(tty_hung_up_p(filp)))
1544                 info->count--;
1545         info->blocked_open++;
1546         while (1) {
1547                 set_current_state(TASK_INTERRUPTIBLE);
1548                 if (tty_hung_up_p(filp) ||
1549                     !(info->flags & ISDN_ASYNC_INITIALIZED)) {
1550 #ifdef MODEM_DO_RESTART
1551                         if (info->flags & ISDN_ASYNC_HUP_NOTIFY)
1552                                 retval = -EAGAIN;
1553                         else
1554                                 retval = -ERESTARTSYS;
1555 #else
1556                         retval = -EAGAIN;
1557 #endif
1558                         break;
1559                 }
1560                 if (!(info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) &&
1561                     !(info->flags & ISDN_ASYNC_CLOSING) &&
1562                     (do_clocal || (info->msr & UART_MSR_DCD))) {
1563                         break;
1564                 }
1565                 if (signal_pending(current)) {
1566                         retval = -ERESTARTSYS;
1567                         break;
1568                 }
1569 #ifdef ISDN_DEBUG_MODEM_OPEN
1570                 printk(KERN_DEBUG "isdn_tty_block_til_ready blocking: ttyi%d, count = %d\n",
1571                        info->line, info->count);
1572 #endif
1573                 schedule();
1574         }
1575         current->state = TASK_RUNNING;
1576         remove_wait_queue(&info->open_wait, &wait);
1577         if (!tty_hung_up_p(filp))
1578                 info->count++;
1579         info->blocked_open--;
1580 #ifdef ISDN_DEBUG_MODEM_OPEN
1581         printk(KERN_DEBUG "isdn_tty_block_til_ready after blocking: ttyi%d, count = %d\n",
1582                info->line, info->count);
1583 #endif
1584         if (retval)
1585                 return retval;
1586         info->flags |= ISDN_ASYNC_NORMAL_ACTIVE;
1587         return 0;
1588 }
1589
1590 /*
1591  * This routine is called whenever a serial port is opened.  It
1592  * enables interrupts for a serial port, linking in its async structure into
1593  * the IRQ chain.   It also performs the serial-specific
1594  * initialization for the tty structure.
1595  */
1596 static int
1597 isdn_tty_open(struct tty_struct *tty, struct file *filp)
1598 {
1599         modem_info *info;
1600         int retval, line;
1601
1602         line = tty->index;
1603         if (line < 0 || line > ISDN_MAX_CHANNELS)
1604                 return -ENODEV;
1605         info = &dev->mdm.info[line];
1606         if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_open"))
1607                 return -ENODEV;
1608         if (!try_module_get(info->owner)) {
1609                 printk(KERN_WARNING "%s: cannot reserve module\n", __FUNCTION__);
1610                 return -ENODEV;
1611         }
1612 #ifdef ISDN_DEBUG_MODEM_OPEN
1613         printk(KERN_DEBUG "isdn_tty_open %s, count = %d\n", tty->name,
1614                info->count);
1615 #endif
1616         info->count++;
1617         tty->driver_data = info;
1618         info->tty = tty;
1619         /*
1620          * Start up serial port
1621          */
1622         retval = isdn_tty_startup(info);
1623         if (retval) {
1624 #ifdef ISDN_DEBUG_MODEM_OPEN
1625                 printk(KERN_DEBUG "isdn_tty_open return after startup\n");
1626 #endif
1627                 module_put(info->owner);
1628                 return retval;
1629         }
1630         retval = isdn_tty_block_til_ready(tty, filp, info);
1631         if (retval) {
1632 #ifdef ISDN_DEBUG_MODEM_OPEN
1633                 printk(KERN_DEBUG "isdn_tty_open return after isdn_tty_block_til_ready \n");
1634 #endif
1635                 module_put(info->owner);
1636                 return retval;
1637         }
1638 #ifdef ISDN_DEBUG_MODEM_OPEN
1639         printk(KERN_DEBUG "isdn_tty_open ttyi%d successful...\n", info->line);
1640 #endif
1641         dev->modempoll++;
1642 #ifdef ISDN_DEBUG_MODEM_OPEN
1643         printk(KERN_DEBUG "isdn_tty_open normal exit\n");
1644 #endif
1645         return 0;
1646 }
1647
1648 static void
1649 isdn_tty_close(struct tty_struct *tty, struct file *filp)
1650 {
1651         modem_info *info = (modem_info *) tty->driver_data;
1652         ulong timeout;
1653
1654         if (!info || isdn_tty_paranoia_check(info, tty->name, "isdn_tty_close"))
1655                 return;
1656         if (tty_hung_up_p(filp)) {
1657 #ifdef ISDN_DEBUG_MODEM_OPEN
1658                 printk(KERN_DEBUG "isdn_tty_close return after tty_hung_up_p\n");
1659 #endif
1660                 return;
1661         }
1662         if ((tty->count == 1) && (info->count != 1)) {
1663                 /*
1664                  * Uh, oh.  tty->count is 1, which means that the tty
1665                  * structure will be freed.  Info->count should always
1666                  * be one in these conditions.  If it's greater than
1667                  * one, we've got real problems, since it means the
1668                  * serial port won't be shutdown.
1669                  */
1670                 printk(KERN_ERR "isdn_tty_close: bad port count; tty->count is 1, "
1671                        "info->count is %d\n", info->count);
1672                 info->count = 1;
1673         }
1674         if (--info->count < 0) {
1675                 printk(KERN_ERR "isdn_tty_close: bad port count for ttyi%d: %d\n",
1676                        info->line, info->count);
1677                 info->count = 0;
1678         }
1679         if (info->count) {
1680 #ifdef ISDN_DEBUG_MODEM_OPEN
1681                 printk(KERN_DEBUG "isdn_tty_close after info->count != 0\n");
1682 #endif
1683                 module_put(info->owner);
1684                 return;
1685         }
1686         info->flags |= ISDN_ASYNC_CLOSING;
1687         /*
1688          * Save the termios structure, since this port may have
1689          * separate termios for callout and dialin.
1690          */
1691         if (info->flags & ISDN_ASYNC_NORMAL_ACTIVE)
1692                 info->normal_termios = *tty->termios;
1693         if (info->flags & ISDN_ASYNC_CALLOUT_ACTIVE)
1694                 info->callout_termios = *tty->termios;
1695
1696         tty->closing = 1;
1697         /*
1698          * At this point we stop accepting input.  To do this, we
1699          * disable the receive line status interrupts, and tell the
1700          * interrupt driver to stop checking the data ready bit in the
1701          * line status register.
1702          */
1703         if (info->flags & ISDN_ASYNC_INITIALIZED) {
1704                 tty_wait_until_sent(tty, 3000); /* 30 seconds timeout */
1705                 /*
1706                  * Before we drop DTR, make sure the UART transmitter
1707                  * has completely drained; this is especially
1708                  * important if there is a transmit FIFO!
1709                  */
1710                 timeout = jiffies + HZ;
1711                 while (!(info->lsr & UART_LSR_TEMT)) {
1712                         schedule_timeout_interruptible(20);
1713                         if (time_after(jiffies,timeout))
1714                                 break;
1715                 }
1716         }
1717         dev->modempoll--;
1718         isdn_tty_shutdown(info);
1719
1720         if (tty->driver->flush_buffer)
1721                 tty->driver->flush_buffer(tty);
1722         tty_ldisc_flush(tty);
1723         info->tty = NULL;
1724         info->ncarrier = 0;
1725         tty->closing = 0;
1726         module_put(info->owner);
1727         if (info->blocked_open) {
1728                 msleep_interruptible(500);
1729                 wake_up_interruptible(&info->open_wait);
1730         }
1731         info->flags &= ~(ISDN_ASYNC_NORMAL_ACTIVE | ISDN_ASYNC_CLOSING);
1732         wake_up_interruptible(&info->close_wait);
1733 #ifdef ISDN_DEBUG_MODEM_OPEN
1734         printk(KERN_DEBUG "isdn_tty_close normal exit\n");
1735 #endif
1736 }
1737
1738 /*
1739  * isdn_tty_hangup() --- called by tty_hangup() when a hangup is signaled.
1740  */
1741 static void
1742 isdn_tty_hangup(struct tty_struct *tty)
1743 {
1744         modem_info *info = (modem_info *) tty->driver_data;
1745
1746         if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_hangup"))
1747                 return;
1748         isdn_tty_shutdown(info);
1749         info->count = 0;
1750         info->flags &= ~(ISDN_ASYNC_NORMAL_ACTIVE | ISDN_ASYNC_CALLOUT_ACTIVE);
1751         info->tty = NULL;
1752         wake_up_interruptible(&info->open_wait);
1753 }
1754
1755 /* This routine initializes all emulator-data.
1756  */
1757 static void
1758 isdn_tty_reset_profile(atemu * m)
1759 {
1760         m->profile[0] = 0;
1761         m->profile[1] = 0;
1762         m->profile[2] = 43;
1763         m->profile[3] = 13;
1764         m->profile[4] = 10;
1765         m->profile[5] = 8;
1766         m->profile[6] = 3;
1767         m->profile[7] = 60;
1768         m->profile[8] = 2;
1769         m->profile[9] = 6;
1770         m->profile[10] = 7;
1771         m->profile[11] = 70;
1772         m->profile[12] = 0x45;
1773         m->profile[13] = 4;
1774         m->profile[14] = ISDN_PROTO_L2_X75I;
1775         m->profile[15] = ISDN_PROTO_L3_TRANS;
1776         m->profile[16] = ISDN_SERIAL_XMIT_SIZE / 16;
1777         m->profile[17] = ISDN_MODEM_WINSIZE;
1778         m->profile[18] = 4;
1779         m->profile[19] = 0;
1780         m->profile[20] = 0;
1781         m->profile[23] = 0;
1782         m->pmsn[0] = '\0';
1783         m->plmsn[0] = '\0';
1784 }
1785
1786 #ifdef CONFIG_ISDN_AUDIO
1787 static void
1788 isdn_tty_modem_reset_vpar(atemu * m)
1789 {
1790         m->vpar[0] = 2;         /* Voice-device            (2 = phone line) */
1791         m->vpar[1] = 0;         /* Silence detection level (0 = none      ) */
1792         m->vpar[2] = 70;        /* Silence interval        (7 sec.        ) */
1793         m->vpar[3] = 2;         /* Compression type        (1 = ADPCM-2   ) */
1794         m->vpar[4] = 0;         /* DTMF detection level    (0 = softcode  ) */
1795         m->vpar[5] = 8;         /* DTMF interval           (8 * 5 ms.     ) */
1796 }
1797 #endif
1798
1799 #ifdef CONFIG_ISDN_TTY_FAX
1800 static void
1801 isdn_tty_modem_reset_faxpar(modem_info * info)
1802 {
1803         T30_s *f = info->fax;
1804
1805         f->code = 0;
1806         f->phase = ISDN_FAX_PHASE_IDLE;
1807         f->direction = 0;
1808         f->resolution = 1;      /* fine */
1809         f->rate = 5;            /* 14400 bit/s */
1810         f->width = 0;
1811         f->length = 0;
1812         f->compression = 0;
1813         f->ecm = 0;
1814         f->binary = 0;
1815         f->scantime = 0;
1816         memset(&f->id[0], 32, FAXIDLEN - 1);
1817         f->id[FAXIDLEN - 1] = 0;
1818         f->badlin = 0;
1819         f->badmul = 0;
1820         f->bor = 0;
1821         f->nbc = 0;
1822         f->cq = 0;
1823         f->cr = 0;
1824         f->ctcrty = 0;
1825         f->minsp = 0;
1826         f->phcto = 30;
1827         f->rel = 0;
1828         memset(&f->pollid[0], 32, FAXIDLEN - 1);
1829         f->pollid[FAXIDLEN - 1] = 0;
1830 }
1831 #endif
1832
1833 static void
1834 isdn_tty_modem_reset_regs(modem_info * info, int force)
1835 {
1836         atemu *m = &info->emu;
1837         if ((m->mdmreg[REG_DTRR] & BIT_DTRR) || force) {
1838                 memcpy(m->mdmreg, m->profile, ISDN_MODEM_NUMREG);
1839                 memcpy(m->msn, m->pmsn, ISDN_MSNLEN);
1840                 memcpy(m->lmsn, m->plmsn, ISDN_LMSNLEN);
1841                 info->xmit_size = m->mdmreg[REG_PSIZE] * 16;
1842         }
1843 #ifdef CONFIG_ISDN_AUDIO
1844         isdn_tty_modem_reset_vpar(m);
1845 #endif
1846 #ifdef CONFIG_ISDN_TTY_FAX
1847         isdn_tty_modem_reset_faxpar(info);
1848 #endif
1849         m->mdmcmdl = 0;
1850 }
1851
1852 static void
1853 modem_write_profile(atemu * m)
1854 {
1855         memcpy(m->profile, m->mdmreg, ISDN_MODEM_NUMREG);
1856         memcpy(m->pmsn, m->msn, ISDN_MSNLEN);
1857         memcpy(m->plmsn, m->lmsn, ISDN_LMSNLEN);
1858         if (dev->profd)
1859                 send_sig(SIGIO, dev->profd, 1);
1860 }
1861
1862 static const struct tty_operations modem_ops = {
1863         .open = isdn_tty_open,
1864         .close = isdn_tty_close,
1865         .write = isdn_tty_write,
1866         .flush_chars = isdn_tty_flush_chars,
1867         .write_room = isdn_tty_write_room,
1868         .chars_in_buffer = isdn_tty_chars_in_buffer,
1869         .flush_buffer = isdn_tty_flush_buffer,
1870         .ioctl = isdn_tty_ioctl,
1871         .throttle = isdn_tty_throttle,
1872         .unthrottle = isdn_tty_unthrottle,
1873         .set_termios = isdn_tty_set_termios,
1874         .hangup = isdn_tty_hangup,
1875         .tiocmget = isdn_tty_tiocmget,
1876         .tiocmset = isdn_tty_tiocmset,
1877 };
1878
1879 int
1880 isdn_tty_modem_init(void)
1881 {
1882         isdn_modem_t    *m;
1883         int             i, retval;
1884         modem_info      *info;
1885
1886         m = &dev->mdm;
1887         m->tty_modem = alloc_tty_driver(ISDN_MAX_CHANNELS);
1888         if (!m->tty_modem)
1889                 return -ENOMEM;
1890         m->tty_modem->name = "ttyI";
1891         m->tty_modem->major = ISDN_TTY_MAJOR;
1892         m->tty_modem->minor_start = 0;
1893         m->tty_modem->type = TTY_DRIVER_TYPE_SERIAL;
1894         m->tty_modem->subtype = SERIAL_TYPE_NORMAL;
1895         m->tty_modem->init_termios = tty_std_termios;
1896         m->tty_modem->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
1897         m->tty_modem->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
1898         m->tty_modem->driver_name = "isdn_tty";
1899         tty_set_operations(m->tty_modem, &modem_ops);
1900         retval = tty_register_driver(m->tty_modem);
1901         if (retval) {
1902                 printk(KERN_WARNING "isdn_tty: Couldn't register modem-device\n");
1903                 goto err;
1904         }
1905         for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
1906                 info = &m->info[i];
1907 #ifdef CONFIG_ISDN_TTY_FAX
1908                 if (!(info->fax = kmalloc(sizeof(T30_s), GFP_KERNEL))) {
1909                         printk(KERN_ERR "Could not allocate fax t30-buffer\n");
1910                         retval = -ENOMEM;
1911                         goto err_unregister;
1912                 }
1913 #endif
1914 #ifdef MODULE
1915                 info->owner = THIS_MODULE;
1916 #endif
1917                 spin_lock_init(&info->readlock);
1918                 init_MUTEX(&info->write_sem);
1919                 sprintf(info->last_cause, "0000");
1920                 sprintf(info->last_num, "none");
1921                 info->last_dir = 0;
1922                 info->last_lhup = 1;
1923                 info->last_l2 = -1;
1924                 info->last_si = 0;
1925                 isdn_tty_reset_profile(&info->emu);
1926                 isdn_tty_modem_reset_regs(info, 1);
1927                 info->magic = ISDN_ASYNC_MAGIC;
1928                 info->line = i;
1929                 info->tty = NULL;
1930                 info->x_char = 0;
1931                 info->count = 0;
1932                 info->blocked_open = 0;
1933                 init_waitqueue_head(&info->open_wait);
1934                 init_waitqueue_head(&info->close_wait);
1935                 info->isdn_driver = -1;
1936                 info->isdn_channel = -1;
1937                 info->drv_index = -1;
1938                 info->xmit_size = ISDN_SERIAL_XMIT_SIZE;
1939                 init_timer(&info->nc_timer);
1940                 info->nc_timer.function = isdn_tty_modem_do_ncarrier;
1941                 info->nc_timer.data = (unsigned long) info;
1942                 skb_queue_head_init(&info->xmit_queue);
1943 #ifdef CONFIG_ISDN_AUDIO
1944                 skb_queue_head_init(&info->dtmf_queue);
1945 #endif
1946                 if (!(info->xmit_buf = kmalloc(ISDN_SERIAL_XMIT_MAX + 5, GFP_KERNEL))) {
1947                         printk(KERN_ERR "Could not allocate modem xmit-buffer\n");
1948                         retval = -ENOMEM;
1949                         goto err_unregister;
1950                 }
1951                 /* Make room for T.70 header */
1952                 info->xmit_buf += 4;
1953         }
1954         return 0;
1955 err_unregister:
1956         for (i--; i >= 0; i--) {
1957                 info = &m->info[i];
1958 #ifdef CONFIG_ISDN_TTY_FAX
1959                 kfree(info->fax);
1960 #endif
1961                 kfree(info->xmit_buf - 4);
1962         }
1963         tty_unregister_driver(m->tty_modem);
1964  err:
1965         put_tty_driver(m->tty_modem);
1966         m->tty_modem = NULL;
1967         return retval;
1968 }
1969
1970 void
1971 isdn_tty_exit(void)
1972 {
1973         modem_info *info;
1974         int i;
1975
1976         for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
1977                 info = &dev->mdm.info[i];
1978                 isdn_tty_cleanup_xmit(info);
1979 #ifdef CONFIG_ISDN_TTY_FAX
1980                 kfree(info->fax);
1981 #endif
1982                 kfree(info->xmit_buf - 4);
1983         }
1984         tty_unregister_driver(dev->mdm.tty_modem);
1985         put_tty_driver(dev->mdm.tty_modem);
1986         dev->mdm.tty_modem = NULL;
1987 }
1988
1989
1990 /*
1991  * isdn_tty_match_icall(char *MSN, atemu *tty_emulator, int dev_idx)
1992  *      match the MSN against the MSNs (glob patterns) defined for tty_emulator,
1993  *      and return 0 for match, 1 for no match, 2 if MSN could match if longer.
1994  */
1995
1996 static int
1997 isdn_tty_match_icall(char *cid, atemu *emu, int di)
1998 {
1999 #ifdef ISDN_DEBUG_MODEM_ICALL
2000         printk(KERN_DEBUG "m_fi: msn=%s lmsn=%s mmsn=%s mreg[SI1]=%d mreg[SI2]=%d\n",
2001                emu->msn, emu->lmsn, isdn_map_eaz2msn(emu->msn, di),
2002                emu->mdmreg[REG_SI1], emu->mdmreg[REG_SI2]);
2003 #endif
2004         if (strlen(emu->lmsn)) {
2005                 char *p = emu->lmsn;
2006                 char *q;
2007                 int  tmp;
2008                 int  ret = 0;
2009
2010                 while (1) {
2011                         if ((q = strchr(p, ';')))
2012                                 *q = '\0';
2013                         if ((tmp = isdn_msncmp(cid, isdn_map_eaz2msn(p, di))) > ret)
2014                                 ret = tmp;
2015 #ifdef ISDN_DEBUG_MODEM_ICALL
2016                         printk(KERN_DEBUG "m_fi: lmsnX=%s mmsn=%s -> tmp=%d\n",
2017                                p, isdn_map_eaz2msn(emu->msn, di), tmp);
2018 #endif
2019                         if (q) {
2020                                 *q = ';';
2021                                 p = q;
2022                                 p++;
2023                         }
2024                         if (!tmp)
2025                                 return 0;
2026                         if (!q)
2027                                 break;
2028                 }
2029                 return ret;
2030         } else {
2031                 int tmp;
2032                 tmp = isdn_msncmp(cid, isdn_map_eaz2msn(emu->msn, di));
2033 #ifdef ISDN_DEBUG_MODEM_ICALL
2034                         printk(KERN_DEBUG "m_fi: mmsn=%s -> tmp=%d\n",
2035                                isdn_map_eaz2msn(emu->msn, di), tmp);
2036 #endif
2037                 return tmp;
2038         }
2039 }
2040
2041 /*
2042  * An incoming call-request has arrived.
2043  * Search the tty-devices for an appropriate device and bind
2044  * it to the ISDN-Channel.
2045  * Return:
2046  *
2047  *  0 = No matching device found.
2048  *  1 = A matching device found.
2049  *  3 = No match found, but eventually would match, if
2050  *      CID is longer.
2051  */
2052 int
2053 isdn_tty_find_icall(int di, int ch, setup_parm *setup)
2054 {
2055         char *eaz;
2056         int i;
2057         int wret;
2058         int idx;
2059         int si1;
2060         int si2;
2061         char *nr;
2062         ulong flags;
2063
2064         if (!setup->phone[0]) {
2065                 nr = "0";
2066                 printk(KERN_INFO "isdn_tty: Incoming call without OAD, assuming '0'\n");
2067         } else
2068                 nr = setup->phone;
2069         si1 = (int) setup->si1;
2070         si2 = (int) setup->si2;
2071         if (!setup->eazmsn[0]) {
2072                 printk(KERN_WARNING "isdn_tty: Incoming call without CPN, assuming '0'\n");
2073                 eaz = "0";
2074         } else
2075                 eaz = setup->eazmsn;
2076 #ifdef ISDN_DEBUG_MODEM_ICALL
2077         printk(KERN_DEBUG "m_fi: eaz=%s si1=%d si2=%d\n", eaz, si1, si2);
2078 #endif
2079         wret = 0;
2080         spin_lock_irqsave(&dev->lock, flags);
2081         for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
2082                 modem_info *info = &dev->mdm.info[i];
2083
2084                 if (info->count == 0)
2085                     continue;
2086                 if ((info->emu.mdmreg[REG_SI1] & si2bit[si1]) &&  /* SI1 is matching */
2087                     (info->emu.mdmreg[REG_SI2] == si2)) {         /* SI2 is matching */
2088                         idx = isdn_dc2minor(di, ch);
2089 #ifdef ISDN_DEBUG_MODEM_ICALL
2090                         printk(KERN_DEBUG "m_fi: match1 wret=%d\n", wret);
2091                         printk(KERN_DEBUG "m_fi: idx=%d flags=%08lx drv=%d ch=%d usg=%d\n", idx,
2092                                info->flags, info->isdn_driver, info->isdn_channel,
2093                                dev->usage[idx]);
2094 #endif
2095                         if (
2096 #ifndef FIX_FILE_TRANSFER
2097                                 (info->flags & ISDN_ASYNC_NORMAL_ACTIVE) &&
2098 #endif
2099                                 (info->isdn_driver == -1) &&
2100                                 (info->isdn_channel == -1) &&
2101                                 (USG_NONE(dev->usage[idx]))) {
2102                                 int matchret;
2103
2104                                 if ((matchret = isdn_tty_match_icall(eaz, &info->emu, di)) > wret)
2105                                         wret = matchret;
2106                                 if (!matchret) {                  /* EAZ is matching */
2107                                         info->isdn_driver = di;
2108                                         info->isdn_channel = ch;
2109                                         info->drv_index = idx;
2110                                         dev->m_idx[idx] = info->line;
2111                                         dev->usage[idx] &= ISDN_USAGE_EXCLUSIVE;
2112                                         dev->usage[idx] |= isdn_calc_usage(si1, info->emu.mdmreg[REG_L2PROT]);
2113                                         strcpy(dev->num[idx], nr);
2114                                         strcpy(info->emu.cpn, eaz);
2115                                         info->emu.mdmreg[REG_SI1I] = si2bit[si1];
2116                                         info->emu.mdmreg[REG_PLAN] = setup->plan;
2117                                         info->emu.mdmreg[REG_SCREEN] = setup->screen;
2118                                         isdn_info_update();
2119                                         spin_unlock_irqrestore(&dev->lock, flags);
2120                                         printk(KERN_INFO "isdn_tty: call from %s, -> RING on ttyI%d\n", nr,
2121                                                info->line);
2122                                         info->msr |= UART_MSR_RI;
2123                                         isdn_tty_modem_result(RESULT_RING, info);
2124                                         isdn_timer_ctrl(ISDN_TIMER_MODEMRING, 1);
2125                                         return 1;
2126                                 }
2127                         }
2128                 }
2129         }
2130         spin_unlock_irqrestore(&dev->lock, flags);
2131         printk(KERN_INFO "isdn_tty: call from %s -> %s %s\n", nr, eaz,
2132                ((dev->drv[di]->flags & DRV_FLAG_REJBUS) && (wret != 2))? "rejected" : "ignored");
2133         return (wret == 2)?3:0;
2134 }
2135
2136 #define TTY_IS_ACTIVE(info) \
2137         (info->flags & (ISDN_ASYNC_NORMAL_ACTIVE | ISDN_ASYNC_CALLOUT_ACTIVE))
2138
2139 int
2140 isdn_tty_stat_callback(int i, isdn_ctrl *c)
2141 {
2142         int mi;
2143         modem_info *info;
2144         char *e;
2145
2146         if (i < 0)
2147                 return 0;
2148         if ((mi = dev->m_idx[i]) >= 0) {
2149                 info = &dev->mdm.info[mi];
2150                 switch (c->command) {
2151                         case ISDN_STAT_CINF:
2152                                 printk(KERN_DEBUG "CHARGEINFO on ttyI%d: %ld %s\n", info->line, c->arg, c->parm.num);
2153                                 info->emu.charge = (unsigned) simple_strtoul(c->parm.num, &e, 10);
2154                                 if (e == (char *)c->parm.num)
2155                                         info->emu.charge = 0;
2156
2157                                 break;
2158                         case ISDN_STAT_BSENT:
2159 #ifdef ISDN_TTY_STAT_DEBUG
2160                                 printk(KERN_DEBUG "tty_STAT_BSENT ttyI%d\n", info->line);
2161 #endif
2162                                 if ((info->isdn_driver == c->driver) &&
2163                                     (info->isdn_channel == c->arg)) {
2164                                         info->msr |= UART_MSR_CTS;
2165                                         if (info->send_outstanding)
2166                                                 if (!(--info->send_outstanding))
2167                                                         info->lsr |= UART_LSR_TEMT;
2168                                         isdn_tty_tint(info);
2169                                         return 1;
2170                                 }
2171                                 break;
2172                         case ISDN_STAT_CAUSE:
2173 #ifdef ISDN_TTY_STAT_DEBUG
2174                                 printk(KERN_DEBUG "tty_STAT_CAUSE ttyI%d\n", info->line);
2175 #endif
2176                                 /* Signal cause to tty-device */
2177                                 strncpy(info->last_cause, c->parm.num, 5);
2178                                 return 1;
2179                         case ISDN_STAT_DISPLAY:
2180 #ifdef ISDN_TTY_STAT_DEBUG
2181                                 printk(KERN_DEBUG "tty_STAT_DISPLAY ttyI%d\n", info->line);
2182 #endif
2183                                 /* Signal display to tty-device */
2184                                 if ((info->emu.mdmreg[REG_DISPLAY] & BIT_DISPLAY) &&
2185                                         !(info->emu.mdmreg[REG_RESPNUM] & BIT_RESPNUM)) {
2186                                   isdn_tty_at_cout("\r\n", info);
2187                                   isdn_tty_at_cout("DISPLAY: ", info);
2188                                   isdn_tty_at_cout(c->parm.display, info);
2189                                   isdn_tty_at_cout("\r\n", info);
2190                                 }
2191                                 return 1;
2192                         case ISDN_STAT_DCONN:
2193 #ifdef ISDN_TTY_STAT_DEBUG
2194                                 printk(KERN_DEBUG "tty_STAT_DCONN ttyI%d\n", info->line);
2195 #endif
2196                                 if (TTY_IS_ACTIVE(info)) {
2197                                         if (info->dialing == 1) {
2198                                                 info->dialing = 2;
2199                                                 return 1;
2200                                         }
2201                                 }
2202                                 break;
2203                         case ISDN_STAT_DHUP:
2204 #ifdef ISDN_TTY_STAT_DEBUG
2205                                 printk(KERN_DEBUG "tty_STAT_DHUP ttyI%d\n", info->line);
2206 #endif
2207                                 if (TTY_IS_ACTIVE(info)) {
2208                                         if (info->dialing == 1)
2209                                                 isdn_tty_modem_result(RESULT_BUSY, info);
2210                                         if (info->dialing > 1)
2211                                                 isdn_tty_modem_result(RESULT_NO_CARRIER, info);
2212                                         info->dialing = 0;
2213 #ifdef ISDN_DEBUG_MODEM_HUP
2214                                         printk(KERN_DEBUG "Mhup in ISDN_STAT_DHUP\n");
2215 #endif
2216                                         isdn_tty_modem_hup(info, 0);
2217                                         return 1;
2218                                 }
2219                                 break;
2220                         case ISDN_STAT_BCONN:
2221 #ifdef ISDN_TTY_STAT_DEBUG
2222                                 printk(KERN_DEBUG "tty_STAT_BCONN ttyI%d\n", info->line);
2223 #endif
2224                                 /* Wake up any processes waiting
2225                                  * for incoming call of this device when
2226                                  * DCD follow the state of incoming carrier
2227                                  */
2228                                 if (info->blocked_open &&
2229                                    (info->emu.mdmreg[REG_DCD] & BIT_DCD)) {
2230                                         wake_up_interruptible(&info->open_wait);
2231                                 }
2232
2233                                 /* Schedule CONNECT-Message to any tty
2234                                  * waiting for it and
2235                                  * set DCD-bit of its modem-status.
2236                                  */
2237                                 if (TTY_IS_ACTIVE(info) ||
2238                                     (info->blocked_open && (info->emu.mdmreg[REG_DCD] & BIT_DCD))) {
2239                                         info->msr |= UART_MSR_DCD;
2240                                         info->emu.charge = 0;
2241                                         if (info->dialing & 0xf)
2242                                                 info->last_dir = 1;
2243                                         else
2244                                                 info->last_dir = 0;
2245                                         info->dialing = 0;
2246                                         info->rcvsched = 1;
2247                                         if (USG_MODEM(dev->usage[i])) {
2248                                                 if (info->emu.mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM) {
2249                                                         strcpy(info->emu.connmsg, c->parm.num);
2250                                                         isdn_tty_modem_result(RESULT_CONNECT, info);
2251                                                 } else
2252                                                         isdn_tty_modem_result(RESULT_CONNECT64000, info);
2253                                         }
2254                                         if (USG_VOICE(dev->usage[i]))
2255                                                 isdn_tty_modem_result(RESULT_VCON, info);
2256                                         return 1;
2257                                 }
2258                                 break;
2259                         case ISDN_STAT_BHUP:
2260 #ifdef ISDN_TTY_STAT_DEBUG
2261                                 printk(KERN_DEBUG "tty_STAT_BHUP ttyI%d\n", info->line);
2262 #endif
2263                                 if (TTY_IS_ACTIVE(info)) {
2264 #ifdef ISDN_DEBUG_MODEM_HUP
2265                                         printk(KERN_DEBUG "Mhup in ISDN_STAT_BHUP\n");
2266 #endif
2267                                         isdn_tty_modem_hup(info, 0);
2268                                         return 1;
2269                                 }
2270                                 break;
2271                         case ISDN_STAT_NODCH:
2272 #ifdef ISDN_TTY_STAT_DEBUG
2273                                 printk(KERN_DEBUG "tty_STAT_NODCH ttyI%d\n", info->line);
2274 #endif
2275                                 if (TTY_IS_ACTIVE(info)) {
2276                                         if (info->dialing) {
2277                                                 info->dialing = 0;
2278                                                 info->last_l2 = -1;
2279                                                 info->last_si = 0;
2280                                                 sprintf(info->last_cause, "0000");
2281                                                 isdn_tty_modem_result(RESULT_NO_DIALTONE, info);
2282                                         }
2283                                         isdn_tty_modem_hup(info, 0);
2284                                         return 1;
2285                                 }
2286                                 break;
2287                         case ISDN_STAT_UNLOAD:
2288 #ifdef ISDN_TTY_STAT_DEBUG
2289                                 printk(KERN_DEBUG "tty_STAT_UNLOAD ttyI%d\n", info->line);
2290 #endif
2291                                 for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
2292                                         info = &dev->mdm.info[i];
2293                                         if (info->isdn_driver == c->driver) {
2294                                                 if (info->online)
2295                                                         isdn_tty_modem_hup(info, 1);
2296                                         }
2297                                 }
2298                                 return 1;
2299 #ifdef CONFIG_ISDN_TTY_FAX
2300                         case ISDN_STAT_FAXIND:
2301                                 if (TTY_IS_ACTIVE(info)) {
2302                                         isdn_tty_fax_command(info, c);
2303                                 }
2304                                 break;
2305 #endif
2306 #ifdef CONFIG_ISDN_AUDIO
2307                         case ISDN_STAT_AUDIO:
2308                                 if (TTY_IS_ACTIVE(info)) {
2309                                         switch(c->parm.num[0]) {
2310                                                 case ISDN_AUDIO_DTMF:
2311                                                         if (info->vonline) {
2312                                                                 isdn_audio_put_dle_code(info,
2313                                                                         c->parm.num[1]);
2314                                                         }
2315                                                         break;
2316                                         }
2317                                 }
2318                                 break;
2319 #endif
2320                 }
2321         }
2322         return 0;
2323 }
2324
2325 /*********************************************************************
2326  Modem-Emulator-Routines
2327  *********************************************************************/
2328
2329 #define cmdchar(c) ((c>=' ')&&(c<=0x7f))
2330
2331 /*
2332  * Put a message from the AT-emulator into receive-buffer of tty,
2333  * convert CR, LF, and BS to values in modem-registers 3, 4 and 5.
2334  */
2335 void
2336 isdn_tty_at_cout(char *msg, modem_info * info)
2337 {
2338         struct tty_struct *tty;
2339         atemu *m = &info->emu;
2340         char *p;
2341         char c;
2342         u_long flags;
2343         struct sk_buff *skb = NULL;
2344         char *sp = NULL;
2345         int l;
2346
2347         if (!msg) {
2348                 printk(KERN_WARNING "isdn_tty: Null-Message in isdn_tty_at_cout\n");
2349                 return;
2350         }
2351
2352         l = strlen(msg);
2353
2354         spin_lock_irqsave(&info->readlock, flags);
2355         tty = info->tty;
2356         if ((info->flags & ISDN_ASYNC_CLOSING) || (!tty)) {
2357                 spin_unlock_irqrestore(&info->readlock, flags);
2358                 return;
2359         }
2360
2361         /* use queue instead of direct, if online and */
2362         /* data is in queue or buffer is full */
2363         if (info->online && ((tty_buffer_request_room(tty, l) < l) ||
2364             !skb_queue_empty(&dev->drv[info->isdn_driver]->rpqueue[info->isdn_channel]))) {
2365                 skb = alloc_skb(l, GFP_ATOMIC);
2366                 if (!skb) {
2367                         spin_unlock_irqrestore(&info->readlock, flags);
2368                         return;
2369                 }
2370                 sp = skb_put(skb, l);
2371 #ifdef CONFIG_ISDN_AUDIO
2372                 ISDN_AUDIO_SKB_DLECOUNT(skb) = 0;
2373                 ISDN_AUDIO_SKB_LOCK(skb) = 0;
2374 #endif
2375         }
2376
2377         for (p = msg; *p; p++) {
2378                 switch (*p) {
2379                         case '\r':
2380                                 c = m->mdmreg[REG_CR];
2381                                 break;
2382                         case '\n':
2383                                 c = m->mdmreg[REG_LF];
2384                                 break;
2385                         case '\b':
2386                                 c = m->mdmreg[REG_BS];
2387                                 break;
2388                         default:
2389                                 c = *p;
2390                 }
2391                 if (skb) {
2392                         *sp++ = c;
2393                 } else {
2394                         if(tty_insert_flip_char(tty, c, TTY_NORMAL) == 0)
2395                                 break;
2396                 }
2397         }
2398         if (skb) {
2399                 __skb_queue_tail(&dev->drv[info->isdn_driver]->rpqueue[info->isdn_channel], skb);
2400                 dev->drv[info->isdn_driver]->rcvcount[info->isdn_channel] += skb->len;
2401                 spin_unlock_irqrestore(&info->readlock, flags);
2402                 /* Schedule dequeuing */
2403                 if (dev->modempoll && info->rcvsched)
2404                         isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 1);
2405
2406         } else {
2407                 spin_unlock_irqrestore(&info->readlock, flags);
2408                 tty_flip_buffer_push(tty);
2409         }
2410 }
2411
2412 /*
2413  * Perform ATH Hangup
2414  */
2415 static void
2416 isdn_tty_on_hook(modem_info * info)
2417 {
2418         if (info->isdn_channel >= 0) {
2419 #ifdef ISDN_DEBUG_MODEM_HUP
2420                 printk(KERN_DEBUG "Mhup in isdn_tty_on_hook\n");
2421 #endif
2422                 isdn_tty_modem_hup(info, 1);
2423         }
2424 }
2425
2426 static void
2427 isdn_tty_off_hook(void)
2428 {
2429         printk(KERN_DEBUG "isdn_tty_off_hook\n");
2430 }
2431
2432 #define PLUSWAIT1 (HZ/2)        /* 0.5 sec. */
2433 #define PLUSWAIT2 (HZ*3/2)      /* 1.5 sec */
2434
2435 /*
2436  * Check Buffer for Modem-escape-sequence, activate timer-callback to
2437  * isdn_tty_modem_escape() if sequence found.
2438  *
2439  * Parameters:
2440  *   p          pointer to databuffer
2441  *   plus       escape-character
2442  *   count      length of buffer
2443  *   pluscount  count of valid escape-characters so far
2444  *   lastplus   timestamp of last character
2445  */
2446 static void
2447 isdn_tty_check_esc(const u_char * p, u_char plus, int count, int *pluscount,
2448                    u_long *lastplus)
2449 {
2450         if (plus > 127)
2451                 return;
2452         if (count > 3) {
2453                 p += count - 3;
2454                 count = 3;
2455                 *pluscount = 0;
2456         }
2457         while (count > 0) {
2458                 if (*(p++) == plus) {
2459                         if ((*pluscount)++) {
2460                                 /* Time since last '+' > 0.5 sec. ? */
2461                                 if (time_after(jiffies, *lastplus + PLUSWAIT1))
2462                                         *pluscount = 1;
2463                         } else {
2464                                 /* Time since last non-'+' < 1.5 sec. ? */
2465                                 if (time_before(jiffies, *lastplus + PLUSWAIT2))
2466                                         *pluscount = 0;
2467                         }
2468                         if ((*pluscount == 3) && (count == 1))
2469                                 isdn_timer_ctrl(ISDN_TIMER_MODEMPLUS, 1);
2470                         if (*pluscount > 3)
2471                                 *pluscount = 1;
2472                 } else
2473                         *pluscount = 0;
2474                 *lastplus = jiffies;
2475                 count--;
2476         }
2477 }
2478
2479 /*
2480  * Return result of AT-emulator to tty-receive-buffer, depending on
2481  * modem-register 12, bit 0 and 1.
2482  * For CONNECT-messages also switch to online-mode.
2483  * For RING-message handle auto-ATA if register 0 != 0
2484  */
2485
2486 static void
2487 isdn_tty_modem_result(int code, modem_info * info)
2488 {
2489         atemu *m = &info->emu;
2490         static char *msg[] =
2491         {"OK", "CONNECT", "RING", "NO CARRIER", "ERROR",
2492          "CONNECT 64000", "NO DIALTONE", "BUSY", "NO ANSWER",
2493          "RINGING", "NO MSN/EAZ", "VCON", "RUNG"};
2494         char s[ISDN_MSNLEN+10];
2495
2496         switch (code) {
2497                 case RESULT_RING:
2498                         m->mdmreg[REG_RINGCNT]++;
2499                         if (m->mdmreg[REG_RINGCNT] == m->mdmreg[REG_RINGATA])
2500                                 /* Automatically accept incoming call */
2501                                 isdn_tty_cmd_ATA(info);
2502                         break;
2503                 case RESULT_NO_CARRIER:
2504 #ifdef ISDN_DEBUG_MODEM_HUP
2505                         printk(KERN_DEBUG "modem_result: NO CARRIER %d %d\n",
2506                                (info->flags & ISDN_ASYNC_CLOSING),
2507                                (!info->tty));
2508 #endif
2509                         m->mdmreg[REG_RINGCNT] = 0;
2510                         del_timer(&info->nc_timer);
2511                         info->ncarrier = 0;
2512                         if ((info->flags & ISDN_ASYNC_CLOSING) || (!info->tty)) {
2513                                 return;
2514                         }
2515 #ifdef CONFIG_ISDN_AUDIO
2516                         if (info->vonline & 1) {
2517 #ifdef ISDN_DEBUG_MODEM_VOICE
2518                                 printk(KERN_DEBUG "res3: send DLE-ETX on ttyI%d\n",
2519                                        info->line);
2520 #endif
2521                                 /* voice-recording, add DLE-ETX */
2522                                 isdn_tty_at_cout("\020\003", info);
2523                         }
2524                         if (info->vonline & 2) {
2525 #ifdef ISDN_DEBUG_MODEM_VOICE
2526                                 printk(KERN_DEBUG "res3: send DLE-DC4 on ttyI%d\n",
2527                                        info->line);
2528 #endif
2529                                 /* voice-playing, add DLE-DC4 */
2530                                 isdn_tty_at_cout("\020\024", info);
2531                         }
2532 #endif
2533                         break;
2534                 case RESULT_CONNECT:
2535                 case RESULT_CONNECT64000:
2536                         sprintf(info->last_cause, "0000");
2537                         if (!info->online)
2538                                 info->online = 2;
2539                         break;
2540                 case RESULT_VCON:
2541 #ifdef ISDN_DEBUG_MODEM_VOICE
2542                         printk(KERN_DEBUG "res3: send VCON on ttyI%d\n",
2543                                info->line);
2544 #endif
2545                         sprintf(info->last_cause, "0000");
2546                         if (!info->online)
2547                                 info->online = 1;
2548                         break;
2549         } /* switch(code) */
2550
2551         if (m->mdmreg[REG_RESP] & BIT_RESP) {
2552                 /* Show results */
2553                 if (m->mdmreg[REG_RESPNUM] & BIT_RESPNUM) {
2554                         /* Show numeric results only */
2555                         sprintf(s, "\r\n%d\r\n", code);
2556                         isdn_tty_at_cout(s, info);
2557                 } else {
2558                         if (code == RESULT_RING) {
2559                             /* return if "show RUNG" and ringcounter>1 */
2560                             if ((m->mdmreg[REG_RUNG] & BIT_RUNG) &&
2561                                     (m->mdmreg[REG_RINGCNT] > 1))
2562                                                 return;
2563                             /* print CID, _before_ _every_ ring */
2564                             if (!(m->mdmreg[REG_CIDONCE] & BIT_CIDONCE)) {
2565                                     isdn_tty_at_cout("\r\nCALLER NUMBER: ", info);
2566                                     isdn_tty_at_cout(dev->num[info->drv_index], info);
2567                                     if (m->mdmreg[REG_CDN] & BIT_CDN) {
2568                                             isdn_tty_at_cout("\r\nCALLED NUMBER: ", info);
2569                                             isdn_tty_at_cout(info->emu.cpn, info);
2570                                     }
2571                             }
2572                         }
2573                         isdn_tty_at_cout("\r\n", info);
2574                         isdn_tty_at_cout(msg[code], info);
2575                         switch (code) {
2576                                 case RESULT_CONNECT:
2577                                         switch (m->mdmreg[REG_L2PROT]) {
2578                                                 case ISDN_PROTO_L2_MODEM:
2579                                                         isdn_tty_at_cout(" ", info);
2580                                                         isdn_tty_at_cout(m->connmsg, info);
2581                                                         break;
2582                                         }
2583                                         break;
2584                                 case RESULT_RING:
2585                                         /* Append CPN, if enabled */
2586                                         if ((m->mdmreg[REG_CPN] & BIT_CPN)) {
2587                                                 sprintf(s, "/%s", m->cpn);
2588                                                 isdn_tty_at_cout(s, info);
2589                                         }
2590                                         /* Print CID only once, _after_ 1st RING */
2591                                         if ((m->mdmreg[REG_CIDONCE] & BIT_CIDONCE) &&
2592                                             (m->mdmreg[REG_RINGCNT] == 1)) {
2593                                                 isdn_tty_at_cout("\r\n", info);
2594                                                 isdn_tty_at_cout("CALLER NUMBER: ", info);
2595                                                 isdn_tty_at_cout(dev->num[info->drv_index], info);
2596                                                 if (m->mdmreg[REG_CDN] & BIT_CDN) {
2597                                                         isdn_tty_at_cout("\r\nCALLED NUMBER: ", info);
2598                                                         isdn_tty_at_cout(info->emu.cpn, info);
2599                                                 }
2600                                         }
2601                                         break;
2602                                 case RESULT_NO_CARRIER:
2603                                 case RESULT_NO_DIALTONE:
2604                                 case RESULT_BUSY:
2605                                 case RESULT_NO_ANSWER:
2606                                         m->mdmreg[REG_RINGCNT] = 0;
2607                                         /* Append Cause-Message if enabled */
2608                                         if (m->mdmreg[REG_RESPXT] & BIT_RESPXT) {
2609                                                 sprintf(s, "/%s", info->last_cause);
2610                                                 isdn_tty_at_cout(s, info);
2611                                         }
2612                                         break;
2613                                 case RESULT_CONNECT64000:
2614                                         /* Append Protocol to CONNECT message */
2615                                         switch (m->mdmreg[REG_L2PROT]) {
2616                                                 case ISDN_PROTO_L2_X75I:
2617                                                 case ISDN_PROTO_L2_X75UI:
2618                                                 case ISDN_PROTO_L2_X75BUI:
2619                                                         isdn_tty_at_cout("/X.75", info);
2620                                                         break;
2621                                                 case ISDN_PROTO_L2_HDLC:
2622                                                         isdn_tty_at_cout("/HDLC", info);
2623                                                         break;
2624                                                 case ISDN_PROTO_L2_V11096:
2625                                                         isdn_tty_at_cout("/V110/9600", info);
2626                                                         break;
2627                                                 case ISDN_PROTO_L2_V11019:
2628                                                         isdn_tty_at_cout("/V110/19200", info);
2629                                                         break;
2630                                                 case ISDN_PROTO_L2_V11038:
2631                                                         isdn_tty_at_cout("/V110/38400", info);
2632                                                         break;
2633                                         }
2634                                         if (m->mdmreg[REG_T70] & BIT_T70) {
2635                                                 isdn_tty_at_cout("/T.70", info);
2636                                                 if (m->mdmreg[REG_T70] & BIT_T70_EXT)
2637                                                         isdn_tty_at_cout("+", info);
2638                                         }
2639                                         break;
2640                         }
2641                         isdn_tty_at_cout("\r\n", info);
2642                 }
2643         }
2644         if (code == RESULT_NO_CARRIER) {
2645                 if ((info->flags & ISDN_ASYNC_CLOSING) || (!info->tty)) {
2646                         return;
2647                 }
2648                 tty_ldisc_flush(info->tty);
2649                 if ((info->flags & ISDN_ASYNC_CHECK_CD) &&
2650                     (!((info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) &&
2651                        (info->flags & ISDN_ASYNC_CALLOUT_NOHUP)))) {
2652                         tty_hangup(info->tty);
2653                 }
2654         }
2655 }
2656
2657
2658 /*
2659  * Display a modem-register-value.
2660  */
2661 static void
2662 isdn_tty_show_profile(int ridx, modem_info * info)
2663 {
2664         char v[6];
2665
2666         sprintf(v, "\r\n%d", info->emu.mdmreg[ridx]);
2667         isdn_tty_at_cout(v, info);
2668 }
2669
2670 /*
2671  * Get MSN-string from char-pointer, set pointer to end of number
2672  */
2673 static void
2674 isdn_tty_get_msnstr(char *n, char **p)
2675 {
2676         int limit = ISDN_MSNLEN - 1;
2677
2678         while (((*p[0] >= '0' && *p[0] <= '9') ||
2679                 /* Why a comma ??? */
2680                 (*p[0] == ',') || (*p[0] == ':')) &&
2681                 (limit--))
2682                 *n++ = *p[0]++;
2683         *n = '\0';
2684 }
2685
2686 /*
2687  * Get phone-number from modem-commandbuffer
2688  */
2689 static void
2690 isdn_tty_getdial(char *p, char *q,int cnt)
2691 {
2692         int first = 1;
2693         int limit = ISDN_MSNLEN - 1;    /* MUST match the size of interface var to avoid
2694                                         buffer overflow */
2695
2696         while (strchr(" 0123456789,#.*WPTS-", *p) && *p && --cnt>0) {
2697                 if ((*p >= '0' && *p <= '9') || ((*p == 'S') && first) ||
2698                     (*p == '*') || (*p == '#')) {
2699                         *q++ = *p;
2700                         limit--;
2701                 }
2702                 if(!limit)
2703                         break;
2704                 p++;
2705                 first = 0;
2706         }
2707         *q = 0;
2708 }
2709
2710 #define PARSE_ERROR { isdn_tty_modem_result(RESULT_ERROR, info); return; }
2711 #define PARSE_ERROR1 { isdn_tty_modem_result(RESULT_ERROR, info); return 1; }
2712
2713 static void
2714 isdn_tty_report(modem_info * info)
2715 {
2716         atemu *m = &info->emu;
2717         char s[80];
2718
2719         isdn_tty_at_cout("\r\nStatistics of last connection:\r\n\r\n", info);
2720         sprintf(s, "    Remote Number:    %s\r\n", info->last_num);
2721         isdn_tty_at_cout(s, info);
2722         sprintf(s, "    Direction:        %s\r\n", info->last_dir ? "outgoing" : "incoming");
2723         isdn_tty_at_cout(s, info);
2724         isdn_tty_at_cout("    Layer-2 Protocol: ", info);
2725         switch (info->last_l2) {
2726                 case ISDN_PROTO_L2_X75I:
2727                         isdn_tty_at_cout("X.75i", info);
2728                         break;
2729                 case ISDN_PROTO_L2_X75UI:
2730                         isdn_tty_at_cout("X.75ui", info);
2731                         break;
2732                 case ISDN_PROTO_L2_X75BUI:
2733                         isdn_tty_at_cout("X.75bui", info);
2734                         break;
2735                 case ISDN_PROTO_L2_HDLC:
2736                         isdn_tty_at_cout("HDLC", info);
2737                         break;
2738                 case ISDN_PROTO_L2_V11096:
2739                         isdn_tty_at_cout("V.110 9600 Baud", info);
2740                         break;
2741                 case ISDN_PROTO_L2_V11019:
2742                         isdn_tty_at_cout("V.110 19200 Baud", info);
2743                         break;
2744                 case ISDN_PROTO_L2_V11038:
2745                         isdn_tty_at_cout("V.110 38400 Baud", info);
2746                         break;
2747                 case ISDN_PROTO_L2_TRANS:
2748                         isdn_tty_at_cout("transparent", info);
2749                         break;
2750                 case ISDN_PROTO_L2_MODEM:
2751                         isdn_tty_at_cout("modem", info);
2752                         break;
2753                 case ISDN_PROTO_L2_FAX:
2754                         isdn_tty_at_cout("fax", info);
2755                         break;
2756                 default:
2757                         isdn_tty_at_cout("unknown", info);
2758                         break;
2759         }
2760         if (m->mdmreg[REG_T70] & BIT_T70) {
2761                 isdn_tty_at_cout("/T.70", info);
2762                 if (m->mdmreg[REG_T70] & BIT_T70_EXT)
2763                         isdn_tty_at_cout("+", info);
2764         }
2765         isdn_tty_at_cout("\r\n", info);
2766         isdn_tty_at_cout("    Service:          ", info);
2767         switch (info->last_si) {
2768                 case 1:
2769                         isdn_tty_at_cout("audio\r\n", info);
2770                         break;
2771                 case 5:
2772                         isdn_tty_at_cout("btx\r\n", info);
2773                         break;
2774                 case 7:
2775                         isdn_tty_at_cout("data\r\n", info);
2776                         break;
2777                 default:
2778                         sprintf(s, "%d\r\n", info->last_si);
2779                         isdn_tty_at_cout(s, info);
2780                         break;
2781         }
2782         sprintf(s, "    Hangup location:  %s\r\n", info->last_lhup ? "local" : "remote");
2783         isdn_tty_at_cout(s, info);
2784         sprintf(s, "    Last cause:       %s\r\n", info->last_cause);
2785         isdn_tty_at_cout(s, info);
2786 }
2787
2788 /*
2789  * Parse AT&.. commands.
2790  */
2791 static int
2792 isdn_tty_cmd_ATand(char **p, modem_info * info)
2793 {
2794         atemu *m = &info->emu;
2795         int i;
2796         char rb[100];
2797
2798 #define MAXRB (sizeof(rb) - 1)
2799
2800         switch (*p[0]) {
2801                 case 'B':
2802                         /* &B - Set Buffersize */
2803                         p[0]++;
2804                         i = isdn_getnum(p);
2805                         if ((i < 0) || (i > ISDN_SERIAL_XMIT_MAX))
2806                                 PARSE_ERROR1;
2807 #ifdef CONFIG_ISDN_AUDIO
2808                         if ((m->mdmreg[REG_SI1] & 1) && (i > VBUF))
2809                                 PARSE_ERROR1;
2810 #endif
2811                         m->mdmreg[REG_PSIZE] = i / 16;
2812                         info->xmit_size = m->mdmreg[REG_PSIZE] * 16;
2813                         switch (m->mdmreg[REG_L2PROT]) {
2814                                 case ISDN_PROTO_L2_V11096:
2815                                 case ISDN_PROTO_L2_V11019:
2816                                 case ISDN_PROTO_L2_V11038:
2817                                         info->xmit_size /= 10;
2818                         }
2819                         break;
2820                 case 'C':
2821                         /* &C - DCD Status */
2822                         p[0]++;
2823                         switch (isdn_getnum(p)) {
2824                                 case 0:
2825                                         m->mdmreg[REG_DCD] &= ~BIT_DCD;
2826                                         break;
2827                                 case 1:
2828                                         m->mdmreg[REG_DCD] |= BIT_DCD;
2829                                         break;
2830                                 default:
2831                                         PARSE_ERROR1
2832                         }
2833                         break;
2834                 case 'D':
2835                         /* &D - Set DTR-Low-behavior */
2836                         p[0]++;
2837                         switch (isdn_getnum(p)) {
2838                                 case 0:
2839                                         m->mdmreg[REG_DTRHUP] &= ~BIT_DTRHUP;
2840                                         m->mdmreg[REG_DTRR] &= ~BIT_DTRR;
2841                                         break;
2842                                 case 2:
2843                                         m->mdmreg[REG_DTRHUP] |= BIT_DTRHUP;
2844                                         m->mdmreg[REG_DTRR] &= ~BIT_DTRR;
2845                                         break;
2846                                 case 3:
2847                                         m->mdmreg[REG_DTRHUP] |= BIT_DTRHUP;
2848                                         m->mdmreg[REG_DTRR] |= BIT_DTRR;
2849                                         break;
2850                                 default:
2851                                         PARSE_ERROR1
2852                         }
2853                         break;
2854                 case 'E':
2855                         /* &E -Set EAZ/MSN */
2856                         p[0]++;
2857                         isdn_tty_get_msnstr(m->msn, p);
2858                         break;
2859                 case 'F':
2860                         /* &F -Set Factory-Defaults */
2861                         p[0]++;
2862                         if (info->msr & UART_MSR_DCD)
2863                                 PARSE_ERROR1;
2864                         isdn_tty_reset_profile(m);
2865                         isdn_tty_modem_reset_regs(info, 1);
2866                         break;
2867 #ifdef DUMMY_HAYES_AT
2868                 case 'K':
2869                         /* only for be compilant with common scripts */
2870                         /* &K Flowcontrol - no function */
2871                         p[0]++;
2872                         isdn_getnum(p);
2873                         break;
2874 #endif
2875                 case 'L':
2876                         /* &L -Set Numbers to listen on */
2877                         p[0]++;
2878                         i = 0;
2879                         while (*p[0] && (strchr("0123456789,-*[]?;", *p[0])) &&
2880                                (i < ISDN_LMSNLEN - 1))
2881                                 m->lmsn[i++] = *p[0]++;
2882                         m->lmsn[i] = '\0';
2883                         break;
2884                 case 'R':
2885                         /* &R - Set V.110 bitrate adaption */
2886                         p[0]++;
2887                         i = isdn_getnum(p);
2888                         switch (i) {
2889                                 case 0:
2890                                         /* Switch off V.110, back to X.75 */
2891                                         m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
2892                                         m->mdmreg[REG_SI2] = 0;
2893                                         info->xmit_size = m->mdmreg[REG_PSIZE] * 16;
2894                                         break;
2895                                 case 9600:
2896                                         m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11096;
2897                                         m->mdmreg[REG_SI2] = 197;
2898                                         info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10;
2899                                         break;
2900                                 case 19200:
2901                                         m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11019;
2902                                         m->mdmreg[REG_SI2] = 199;
2903                                         info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10;
2904                                         break;
2905                                 case 38400:
2906                                         m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11038;
2907                                         m->mdmreg[REG_SI2] = 198; /* no existing standard for this */
2908                                         info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10;
2909                                         break;
2910                                 default:
2911                                         PARSE_ERROR1;
2912                         }
2913                         /* Switch off T.70 */
2914                         m->mdmreg[REG_T70] &= ~(BIT_T70 | BIT_T70_EXT);
2915                         /* Set Service 7 */
2916                         m->mdmreg[REG_SI1] |= 4;
2917                         break;
2918                 case 'S':
2919                         /* &S - Set Windowsize */
2920                         p[0]++;
2921                         i = isdn_getnum(p);
2922                         if ((i > 0) && (i < 9))
2923                                 m->mdmreg[REG_WSIZE] = i;
2924                         else
2925                                 PARSE_ERROR1;
2926                         break;
2927                 case 'V':
2928                         /* &V - Show registers */
2929                         p[0]++;
2930                         isdn_tty_at_cout("\r\n", info);
2931                         for (i = 0; i < ISDN_MODEM_NUMREG; i++) {
2932                                 sprintf(rb, "S%02d=%03d%s", i,
2933                                         m->mdmreg[i], ((i + 1) % 10) ? " " : "\r\n");
2934                                 isdn_tty_at_cout(rb, info);
2935                         }
2936                         sprintf(rb, "\r\nEAZ/MSN: %.50s\r\n",
2937                                 strlen(m->msn) ? m->msn : "None");
2938                         isdn_tty_at_cout(rb, info);
2939                         if (strlen(m->lmsn)) {
2940                                 isdn_tty_at_cout("\r\nListen: ", info);
2941                                 isdn_tty_at_cout(m->lmsn, info);
2942                                 isdn_tty_at_cout("\r\n", info);
2943                         }
2944                         break;
2945                 case 'W':
2946                         /* &W - Write Profile */
2947                         p[0]++;
2948                         switch (*p[0]) {
2949                                 case '0':
2950                                         p[0]++;
2951                                         modem_write_profile(m);
2952                                         break;
2953                                 default:
2954                                         PARSE_ERROR1;
2955                         }
2956                         break;
2957                 case 'X':
2958                         /* &X - Switch to BTX-Mode and T.70 */
2959                         p[0]++;
2960                         switch (isdn_getnum(p)) {
2961                                 case 0:
2962                                         m->mdmreg[REG_T70] &= ~(BIT_T70 | BIT_T70_EXT);
2963                                         info->xmit_size = m->mdmreg[REG_PSIZE] * 16;
2964                                         break;
2965                                 case 1:
2966                                         m->mdmreg[REG_T70] |= BIT_T70;
2967                                         m->mdmreg[REG_T70] &= ~BIT_T70_EXT;
2968                                         m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
2969                                         info->xmit_size = 112;
2970                                         m->mdmreg[REG_SI1] = 4;
2971                                         m->mdmreg[REG_SI2] = 0;
2972                                         break;
2973                                 case 2:
2974                                         m->mdmreg[REG_T70] |= (BIT_T70 | BIT_T70_EXT);
2975                                         m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
2976                                         info->xmit_size = 112;
2977                                         m->mdmreg[REG_SI1] = 4;
2978                                         m->mdmreg[REG_SI2] = 0;
2979                                         break;
2980                                 default:
2981                                         PARSE_ERROR1;
2982                         }
2983                         break;
2984                 default:
2985                         PARSE_ERROR1;
2986         }
2987         return 0;
2988 }
2989
2990 static int
2991 isdn_tty_check_ats(int mreg, int mval, modem_info * info, atemu * m)
2992 {
2993         /* Some plausibility checks */
2994         switch (mreg) {
2995                 case REG_L2PROT:
2996                         if (mval > ISDN_PROTO_L2_MAX)
2997                                 return 1;
2998                         break;
2999                 case REG_PSIZE:
3000                         if ((mval * 16) > ISDN_SERIAL_XMIT_MAX)
3001                                 return 1;
3002 #ifdef CONFIG_ISDN_AUDIO
3003                         if ((m->mdmreg[REG_SI1] & 1) && (mval > VBUFX))
3004                                 return 1;
3005 #endif
3006                         info->xmit_size = mval * 16;
3007                         switch (m->mdmreg[REG_L2PROT]) {
3008                                 case ISDN_PROTO_L2_V11096:
3009                                 case ISDN_PROTO_L2_V11019:
3010                                 case ISDN_PROTO_L2_V11038:
3011                                         info->xmit_size /= 10;
3012                         }
3013                         break;
3014                 case REG_SI1I:
3015                 case REG_PLAN:
3016                 case REG_SCREEN:
3017                         /* readonly registers */
3018                         return 1;
3019         }
3020         return 0;
3021 }
3022
3023 /*
3024  * Perform ATS command
3025  */
3026 static int
3027 isdn_tty_cmd_ATS(char **p, modem_info * info)
3028 {
3029         atemu *m = &info->emu;
3030         int bitpos;
3031         int mreg;
3032         int mval;
3033         int bval;
3034
3035         mreg = isdn_getnum(p);
3036         if (mreg < 0 || mreg >= ISDN_MODEM_NUMREG)
3037                 PARSE_ERROR1;
3038         switch (*p[0]) {
3039                 case '=':
3040                         p[0]++;
3041                         mval = isdn_getnum(p);
3042                         if (mval < 0 || mval > 255)
3043                                 PARSE_ERROR1;
3044                         if (isdn_tty_check_ats(mreg, mval, info, m))
3045                                 PARSE_ERROR1;
3046                         m->mdmreg[mreg] = mval;
3047                         break;
3048                 case '.':
3049                         /* Set/Clear a single bit */
3050                         p[0]++;
3051                         bitpos = isdn_getnum(p);
3052                         if ((bitpos < 0) || (bitpos > 7))
3053                                 PARSE_ERROR1;
3054                         switch (*p[0]) {
3055                                 case '=':
3056                                         p[0]++;
3057                                         bval = isdn_getnum(p);
3058                                         if (bval < 0 || bval > 1)
3059                                                 PARSE_ERROR1;
3060                                         if (bval)
3061                                                 mval = m->mdmreg[mreg] | (1 << bitpos);
3062                                         else
3063                                                 mval = m->mdmreg[mreg] & ~(1 << bitpos);
3064                                         if (isdn_tty_check_ats(mreg, mval, info, m))
3065                                                 PARSE_ERROR1;
3066                                         m->mdmreg[mreg] = mval;
3067                                         break;
3068                                 case '?':
3069                                         p[0]++;
3070                                         isdn_tty_at_cout("\r\n", info);
3071                                         isdn_tty_at_cout((m->mdmreg[mreg] & (1 << bitpos)) ? "1" : "0",
3072                                                          info);
3073                                         break;
3074                                 default:
3075                                         PARSE_ERROR1;
3076                         }
3077                         break;
3078                 case '?':
3079                         p[0]++;
3080                         isdn_tty_show_profile(mreg, info);
3081                         break;
3082                 default:
3083                         PARSE_ERROR1;
3084                         break;
3085         }
3086         return 0;
3087 }
3088
3089 /*
3090  * Perform ATA command
3091  */
3092 static void
3093 isdn_tty_cmd_ATA(modem_info * info)
3094 {
3095         atemu *m = &info->emu;
3096         isdn_ctrl cmd;
3097         int l2;
3098
3099         if (info->msr & UART_MSR_RI) {
3100                 /* Accept incoming call */
3101                 info->last_dir = 0;
3102                 strcpy(info->last_num, dev->num[info->drv_index]);
3103                 m->mdmreg[REG_RINGCNT] = 0;
3104                 info->msr &= ~UART_MSR_RI;
3105                 l2 = m->mdmreg[REG_L2PROT];
3106 #ifdef CONFIG_ISDN_AUDIO
3107                 /* If more than one bit set in reg18, autoselect Layer2 */
3108                 if ((m->mdmreg[REG_SI1] & m->mdmreg[REG_SI1I]) != m->mdmreg[REG_SI1]) {
3109                         if (m->mdmreg[REG_SI1I] == 1) {
3110                                 if ((l2 != ISDN_PROTO_L2_MODEM) && (l2 != ISDN_PROTO_L2_FAX))
3111                                         l2 = ISDN_PROTO_L2_TRANS;
3112                         } else
3113                                 l2 = ISDN_PROTO_L2_X75I;
3114                 }
3115 #endif
3116                 cmd.driver = info->isdn_driver;
3117                 cmd.command = ISDN_CMD_SETL2;
3118                 cmd.arg = info->isdn_channel + (l2 << 8);
3119                 info->last_l2 = l2;
3120                 isdn_command(&cmd);
3121                 cmd.driver = info->isdn_driver;
3122                 cmd.command = ISDN_CMD_SETL3;
3123                 cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8);
3124 #ifdef CONFIG_ISDN_TTY_FAX
3125                 if (l2 == ISDN_PROTO_L2_FAX) {
3126                         cmd.parm.fax = info->fax;
3127                         info->fax->direction = ISDN_TTY_FAX_CONN_IN;
3128                 }
3129 #endif
3130                 isdn_command(&cmd);
3131                 cmd.driver = info->isdn_driver;
3132                 cmd.arg = info->isdn_channel;
3133                 cmd.command = ISDN_CMD_ACCEPTD;
3134                 info->dialing = 16;
3135                 info->emu.carrierwait = 0;
3136                 isdn_command(&cmd);
3137                 isdn_timer_ctrl(ISDN_TIMER_CARRIER, 1);
3138         } else
3139                 isdn_tty_modem_result(RESULT_NO_ANSWER, info);
3140 }
3141
3142 #ifdef CONFIG_ISDN_AUDIO
3143 /*
3144  * Parse AT+F.. commands
3145  */
3146 static int
3147 isdn_tty_cmd_PLUSF(char **p, modem_info * info)
3148 {
3149         atemu *m = &info->emu;
3150         char rs[20];
3151
3152         if (!strncmp(p[0], "CLASS", 5)) {
3153                 p[0] += 5;
3154                 switch (*p[0]) {
3155                         case '?':
3156                                 p[0]++;
3157                                 sprintf(rs, "\r\n%d",
3158                                         (m->mdmreg[REG_SI1] & 1) ? 8 : 0);
3159 #ifdef CONFIG_ISDN_TTY_FAX
3160                                 if (TTY_IS_FCLASS2(info))
3161                                                 sprintf(rs, "\r\n2");
3162                                 else if (TTY_IS_FCLASS1(info))
3163                                                 sprintf(rs, "\r\n1");
3164 #endif
3165                                 isdn_tty_at_cout(rs, info);
3166                                 break;
3167                         case '=':
3168                                 p[0]++;
3169                                 switch (*p[0]) {
3170                                         case '0':
3171                                                 p[0]++;
3172                                                 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
3173                                                 m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_TRANS;
3174                                                 m->mdmreg[REG_SI1] = 4;
3175                                                 info->xmit_size =
3176                                                     m->mdmreg[REG_PSIZE] * 16;
3177                                                 break;
3178 #ifdef CONFIG_ISDN_TTY_FAX
3179                                         case '1':
3180                                                 p[0]++;
3181                                                 if (!(dev->global_features &
3182                                                         ISDN_FEATURE_L3_FCLASS1))
3183                                                         PARSE_ERROR1;
3184                                                 m->mdmreg[REG_SI1] = 1;
3185                                                 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_FAX;
3186                                                 m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_FCLASS1;
3187                                                 info->xmit_size =
3188                                                     m->mdmreg[REG_PSIZE] * 16;
3189                                                 break;
3190                                         case '2':
3191                                                 p[0]++;
3192                                                 if (!(dev->global_features &
3193                                                         ISDN_FEATURE_L3_FCLASS2))
3194                                                         PARSE_ERROR1;
3195                                                 m->mdmreg[REG_SI1] = 1;
3196                                                 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_FAX;
3197                                                 m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_FCLASS2;
3198                                                 info->xmit_size =
3199                                                     m->mdmreg[REG_PSIZE] * 16;
3200                                                 break;
3201 #endif
3202                                         case '8':
3203                                                 p[0]++;
3204                                                 /* L2 will change on dialout with si=1 */
3205                                                 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
3206                                                 m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_TRANS;
3207                                                 m->mdmreg[REG_SI1] = 5;
3208                                                 info->xmit_size = VBUF;
3209                                                 break;
3210                                         case '?':
3211                                                 p[0]++;
3212                                                 strcpy(rs, "\r\n0,");
3213 #ifdef CONFIG_ISDN_TTY_FAX
3214                                                 if (dev->global_features &
3215                                                         ISDN_FEATURE_L3_FCLASS1)
3216                                                         strcat(rs, "1,");
3217                                                 if (dev->global_features &
3218                                                         ISDN_FEATURE_L3_FCLASS2)
3219                                                         strcat(rs, "2,");
3220 #endif
3221                                                 strcat(rs, "8");
3222                                                 isdn_tty_at_cout(rs, info);
3223                                                 break;
3224                                         default:
3225                                                 PARSE_ERROR1;
3226                                 }
3227                                 break;
3228                         default:
3229                                 PARSE_ERROR1;
3230                 }
3231                 return 0;
3232         }
3233 #ifdef CONFIG_ISDN_TTY_FAX
3234         return (isdn_tty_cmd_PLUSF_FAX(p, info));
3235 #else
3236         PARSE_ERROR1;
3237 #endif
3238 }
3239
3240 /*
3241  * Parse AT+V.. commands
3242  */
3243 static int
3244 isdn_tty_cmd_PLUSV(char **p, modem_info * info)
3245 {
3246         atemu *m = &info->emu;
3247         isdn_ctrl cmd;
3248         static char *vcmd[] =
3249         {"NH", "IP", "LS", "RX", "SD", "SM", "TX", "DD", NULL};
3250         int i;
3251         int par1;
3252         int par2;
3253         char rs[20];
3254
3255         i = 0;
3256         while (vcmd[i]) {
3257                 if (!strncmp(vcmd[i], p[0], 2)) {
3258                         p[0] += 2;
3259                         break;
3260                 }
3261                 i++;
3262         }
3263         switch (i) {
3264                 case 0:
3265                         /* AT+VNH - Auto hangup feature */
3266                         switch (*p[0]) {
3267                                 case '?':
3268                                         p[0]++;
3269                                         isdn_tty_at_cout("\r\n1", info);
3270                                         break;
3271                                 case '=':
3272                                         p[0]++;
3273                                         switch (*p[0]) {
3274                                                 case '1':
3275                                                         p[0]++;
3276                                                         break;
3277                                                 case '?':
3278                                                         p[0]++;
3279                                                         isdn_tty_at_cout("\r\n1", info);
3280                                                         break;
3281                                                 default:
3282                                                         PARSE_ERROR1;
3283                                         }
3284                                         break;
3285                                 default:
3286                                         PARSE_ERROR1;
3287                         }
3288                         break;
3289                 case 1:
3290                         /* AT+VIP - Reset all voice parameters */
3291                         isdn_tty_modem_reset_vpar(m);
3292                         break;
3293                 case 2:
3294                         /* AT+VLS - Select device, accept incoming call */
3295                         switch (*p[0]) {
3296                                 case '?':
3297                                         p[0]++;
3298                                         sprintf(rs, "\r\n%d", m->vpar[0]);
3299                                         isdn_tty_at_cout(rs, info);
3300                                         break;
3301                                 case '=':
3302                                         p[0]++;
3303                                         switch (*p[0]) {
3304                                                 case '0':
3305                                                         p[0]++;
3306                                                         m->vpar[0] = 0;
3307                                                         break;
3308                                                 case '2':
3309                                                         p[0]++;
3310                                                         m->vpar[0] = 2;
3311                                                         break;
3312                                                 case '?':
3313                                                         p[0]++;
3314                                                         isdn_tty_at_cout("\r\n0,2", info);
3315                                                         break;
3316                                                 default:
3317                                                         PARSE_ERROR1;
3318                                         }
3319                                         break;
3320                                 default:
3321                                         PARSE_ERROR1;
3322                         }
3323                         break;
3324                 case 3:
3325                         /* AT+VRX - Start recording */
3326                         if (!m->vpar[0])
3327                                 PARSE_ERROR1;
3328                         if (info->online != 1) {
3329                                 isdn_tty_modem_result(RESULT_NO_ANSWER, info);
3330                                 return 1;
3331                         }
3332                         info->dtmf_state = isdn_audio_dtmf_init(info->dtmf_state);
3333                         if (!info->dtmf_state) {
3334                                 printk(KERN_WARNING "isdn_tty: Couldn't malloc dtmf state\n");
3335                                 PARSE_ERROR1;
3336                         }
3337                         info->silence_state = isdn_audio_silence_init(info->silence_state);
3338                         if (!info->silence_state) {
3339                                 printk(KERN_WARNING "isdn_tty: Couldn't malloc silence state\n");
3340                                 PARSE_ERROR1;
3341                         }
3342                         if (m->vpar[3] < 5) {
3343                                 info->adpcmr = isdn_audio_adpcm_init(info->adpcmr, m->vpar[3]);
3344                                 if (!info->adpcmr) {
3345                                         printk(KERN_WARNING "isdn_tty: Couldn't malloc adpcm state\n");
3346                                         PARSE_ERROR1;
3347                                 }
3348                         }
3349 #ifdef ISDN_DEBUG_AT
3350                         printk(KERN_DEBUG "AT: +VRX\n");
3351 #endif
3352                         info->vonline |= 1;
3353                         isdn_tty_modem_result(RESULT_CONNECT, info);
3354                         return 0;
3355                         break;
3356                 case 4:
3357                         /* AT+VSD - Silence detection */
3358                         switch (*p[0]) {
3359                                 case '?':
3360                                         p[0]++;
3361                                         sprintf(rs, "\r\n<%d>,<%d>",
3362                                                 m->vpar[1],
3363                                                 m->vpar[2]);
3364                                         isdn_tty_at_cout(rs, info);
3365                                         break;
3366                                 case '=':
3367                                         p[0]++;
3368                                         if ((*p[0]>='0') && (*p[0]<='9')) {
3369                                                 par1 = isdn_getnum(p);
3370                                                 if ((par1 < 0) || (par1 > 31))
3371                                                         PARSE_ERROR1;
3372                                                 if (*p[0] != ',')
3373                                                         PARSE_ERROR1;
3374                                                 p[0]++;
3375                                                 par2 = isdn_getnum(p);
3376                                                 if ((par2 < 0) || (par2 > 255))
3377                                                         PARSE_ERROR1;
3378                                                 m->vpar[1] = par1;
3379                                                 m->vpar[2] = par2;
3380                                                 break;
3381                                         } else
3382                                         if (*p[0] == '?') {
3383                                                 p[0]++;
3384                                                 isdn_tty_at_cout("\r\n<0-31>,<0-255>",
3385                                                            info);
3386                                                 break;
3387                                         } else
3388                                         PARSE_ERROR1;
3389                                         break;
3390                                 default:
3391                                         PARSE_ERROR1;
3392                         }
3393                         break;
3394                 case 5:
3395                         /* AT+VSM - Select compression */
3396                         switch (*p[0]) {
3397                                 case '?':
3398                                         p[0]++;
3399                                         sprintf(rs, "\r\n<%d>,<%d><8000>",
3400                                                 m->vpar[3],
3401                                                 m->vpar[1]);
3402                                         isdn_tty_at_cout(rs, info);
3403                                         break;
3404                                 case '=':
3405                                         p[0]++;
3406                                         switch (*p[0]) {
3407                                                 case '2':
3408                                                 case '3':
3409                                                 case '4':
3410                                                 case '5':
3411                                                 case '6':
3412                                                         par1 = isdn_getnum(p);
3413                                                         if ((par1 < 2) || (par1 > 6))
3414                                                                 PARSE_ERROR1;
3415                                                         m->vpar[3] = par1;
3416                                                         break;
3417                                                 case '?':
3418                                                         p[0]++;
3419                                                         isdn_tty_at_cout("\r\n2;ADPCM;2;0;(8000)\r\n",
3420                                                                    info);
3421                                                         isdn_tty_at_cout("3;ADPCM;3;0;(8000)\r\n",
3422                                                                    info);
3423                                                         isdn_tty_at_cout("4;ADPCM;4;0;(8000)\r\n",
3424                                                                    info);
3425                                                         isdn_tty_at_cout("5;ALAW;8;0;(8000)\r\n",
3426                                                                    info);
3427                                                         isdn_tty_at_cout("6;ULAW;8;0;(8000)\r\n",
3428                                                                    info);
3429                                                         break;
3430                                                 default:
3431                                                         PARSE_ERROR1;
3432                                         }
3433                                         break;
3434                                 default:
3435                                         PARSE_ERROR1;
3436                         }
3437                         break;
3438                 case 6:
3439                         /* AT+VTX - Start sending */
3440                         if (!m->vpar[0])
3441                                 PARSE_ERROR1;
3442                         if (info->online != 1) {
3443                                 isdn_tty_modem_result(RESULT_NO_ANSWER, info);
3444                                 return 1;
3445                         }
3446                         info->dtmf_state = isdn_audio_dtmf_init(info->dtmf_state);
3447                         if (!info->dtmf_state) {
3448                                 printk(KERN_WARNING "isdn_tty: Couldn't malloc dtmf state\n");
3449                                 PARSE_ERROR1;
3450                         }
3451                         if (m->vpar[3] < 5) {
3452                                 info->adpcms = isdn_audio_adpcm_init(info->adpcms, m->vpar[3]);
3453                                 if (!info->adpcms) {
3454                                         printk(KERN_WARNING "isdn_tty: Couldn't malloc adpcm state\n");
3455                                         PARSE_ERROR1;
3456                                 }
3457                         }
3458 #ifdef ISDN_DEBUG_AT
3459                         printk(KERN_DEBUG "AT: +VTX\n");
3460 #endif
3461                         m->lastDLE = 0;
3462                         info->vonline |= 2;
3463                         isdn_tty_modem_result(RESULT_CONNECT, info);
3464                         return 0;
3465                         break;
3466                 case 7:
3467                         /* AT+VDD - DTMF detection */
3468                         switch (*p[0]) {
3469                                 case '?':
3470                                         p[0]++;
3471                                         sprintf(rs, "\r\n<%d>,<%d>",
3472                                                 m->vpar[4],
3473                                                 m->vpar[5]);
3474                                         isdn_tty_at_cout(rs, info);
3475                                         break;
3476                                 case '=':
3477                                         p[0]++;
3478                                         if ((*p[0]>='0') && (*p[0]<='9')) {
3479                                                 if (info->online != 1)
3480                                                         PARSE_ERROR1;
3481                                                 par1 = isdn_getnum(p);
3482                                                 if ((par1 < 0) || (par1 > 15))
3483                                                         PARSE_ERROR1;
3484                                                 if (*p[0] != ',')
3485                                                         PARSE_ERROR1;
3486                                                 p[0]++;
3487                                                 par2 = isdn_getnum(p);
3488                                                 if ((par2 < 0) || (par2 > 255))
3489                                                         PARSE_ERROR1;
3490                                                 m->vpar[4] = par1;
3491                                                 m->vpar[5] = par2;
3492                                                 cmd.driver = info->isdn_driver;
3493                                                 cmd.command = ISDN_CMD_AUDIO;
3494                                                 cmd.arg = info->isdn_channel + (ISDN_AUDIO_SETDD << 8);
3495                                                 cmd.parm.num[0] = par1;
3496                                                 cmd.parm.num[1] = par2;
3497                                                 isdn_command(&cmd);
3498                                                 break;
3499                                         } else
3500                                         if (*p[0] == '?') {
3501                                                 p[0]++;
3502                                                 isdn_tty_at_cout("\r\n<0-15>,<0-255>",
3503                                                         info);
3504                                                 break;
3505                                         } else
3506                                         PARSE_ERROR1;
3507                                         break;
3508                                 default:
3509                                         PARSE_ERROR1;
3510                         }
3511                         break;
3512                 default:
3513                         PARSE_ERROR1;
3514         }
3515         return 0;
3516 }
3517 #endif                          /* CONFIG_ISDN_AUDIO */
3518
3519 /*
3520  * Parse and perform an AT-command-line.
3521  */
3522 static void
3523 isdn_tty_parse_at(modem_info * info)
3524 {
3525         atemu *m = &info->emu;
3526         char *p;
3527         char ds[40];
3528
3529 #ifdef ISDN_DEBUG_AT
3530         printk(KERN_DEBUG "AT: '%s'\n", m->mdmcmd);
3531 #endif
3532         for (p = &m->mdmcmd[2]; *p;) {
3533                 switch (*p) {
3534                         case ' ':
3535                                 p++;
3536                                 break;
3537                         case 'A':
3538                                 /* A - Accept incoming call */
3539                                 p++;
3540                                 isdn_tty_cmd_ATA(info);
3541                                 return;
3542                                 break;
3543                         case 'D':
3544                                 /* D - Dial */
3545                                 if (info->msr & UART_MSR_DCD)
3546                                         PARSE_ERROR;
3547                                 if (info->msr & UART_MSR_RI) {
3548                                         isdn_tty_modem_result(RESULT_NO_CARRIER, info);
3549                                         return;
3550                                 }
3551                                 isdn_tty_getdial(++p, ds, sizeof ds);
3552                                 p += strlen(p);
3553                                 if (!strlen(m->msn))
3554                                         isdn_tty_modem_result(RESULT_NO_MSN_EAZ, info);
3555                                 else if (strlen(ds))
3556                                         isdn_tty_dial(ds, info, m);
3557                                 else
3558                                         PARSE_ERROR;
3559                                 return;
3560                         case 'E':
3561                                 /* E - Turn Echo on/off */
3562                                 p++;
3563                                 switch (isdn_getnum(&p)) {
3564                                         case 0:
3565                                                 m->mdmreg[REG_ECHO] &= ~BIT_ECHO;
3566                                                 break;
3567                                         case 1:
3568                                                 m->mdmreg[REG_ECHO] |= BIT_ECHO;
3569                                                 break;
3570                                         default:
3571                                                 PARSE_ERROR;
3572                                 }
3573                                 break;
3574                         case 'H':
3575                                 /* H - On/Off-hook */
3576                                 p++;
3577                                 switch (*p) {
3578                                         case '0':
3579                                                 p++;
3580                                                 isdn_tty_on_hook(info);
3581                                                 break;
3582                                         case '1':
3583                                                 p++;
3584                                                 isdn_tty_off_hook();
3585                                                 break;
3586                                         default:
3587                                                 isdn_tty_on_hook(info);
3588                                                 break;
3589                                 }
3590                                 break;
3591                         case 'I':
3592                                 /* I - Information */
3593                                 p++;
3594                                 isdn_tty_at_cout("\r\nLinux ISDN", info);
3595                                 switch (*p) {
3596                                         case '0':
3597                                         case '1':
3598                                                 p++;
3599                                                 break;
3600                                         case '2':
3601                                                 p++;
3602                                                 isdn_tty_report(info);
3603                                                 break;
3604                                         case '3':
3605                                                 p++;
3606                                                 sprintf(ds, "\r\n%d", info->emu.charge);
3607                                                 isdn_tty_at_cout(ds, info);
3608                                                 break;
3609                                         default:;
3610                                 }
3611                                 break;
3612 #ifdef DUMMY_HAYES_AT
3613                         case 'L':
3614                         case 'M':
3615                                 /* only for be compilant with common scripts */
3616                                 /* no function */
3617                                 p++;
3618                                 isdn_getnum(&p);
3619                                 break;
3620 #endif
3621                         case 'O':
3622                                 /* O - Go online */
3623                                 p++;
3624                                 if (info->msr & UART_MSR_DCD)
3625                                         /* if B-Channel is up */
3626                                         isdn_tty_modem_result((m->mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM) ? RESULT_CONNECT:RESULT_CONNECT64000, info);
3627                                 else
3628                                         isdn_tty_modem_result(RESULT_NO_CARRIER, info);
3629                                 return;
3630                         case 'Q':
3631                                 /* Q - Turn Emulator messages on/off */
3632                                 p++;
3633                                 switch (isdn_getnum(&p)) {
3634                                         case 0:
3635                                                 m->mdmreg[REG_RESP] |= BIT_RESP;
3636                                                 break;
3637                                         case 1:
3638                                                 m->mdmreg[REG_RESP] &= ~BIT_RESP;
3639                                                 break;
3640                                         default:
3641                                                 PARSE_ERROR;
3642                                 }
3643                                 break;
3644                         case 'S':
3645                                 /* S - Set/Get Register */
3646                                 p++;
3647                                 if (isdn_tty_cmd_ATS(&p, info))
3648                                         return;
3649                                 break;
3650                         case 'V':
3651                                 /* V - Numeric or ASCII Emulator-messages */
3652                                 p++;
3653                                 switch (isdn_getnum(&p)) {
3654                                         case 0:
3655                                                 m->mdmreg[REG_RESP] |= BIT_RESPNUM;
3656                                                 break;
3657                                         case 1:
3658                                                 m->mdmreg[REG_RESP] &= ~BIT_RESPNUM;
3659                                                 break;
3660                                         default:
3661                                                 PARSE_ERROR;
3662                                 }
3663                                 break;
3664                         case 'Z':
3665                                 /* Z - Load Registers from Profile */
3666                                 p++;
3667                                 if (info->msr & UART_MSR_DCD) {
3668                                         info->online = 0;
3669                                         isdn_tty_on_hook(info);
3670                                 }
3671                                 isdn_tty_modem_reset_regs(info, 1);
3672                                 break;
3673                         case '+':
3674                                 p++;
3675                                 switch (*p) {
3676 #ifdef CONFIG_ISDN_AUDIO
3677                                         case 'F':
3678                                                 p++;
3679                                                 if (isdn_tty_cmd_PLUSF(&p, info))
3680                                                         return;
3681                                                 break;
3682                                         case 'V':
3683                                                 if ((!(m->mdmreg[REG_SI1] & 1)) ||
3684                                                         (m->mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM))
3685                                                         PARSE_ERROR;
3686                                                 p++;
3687                                                 if (isdn_tty_cmd_PLUSV(&p, info))
3688                                                         return;
3689                                                 break;
3690 #endif                          /* CONFIG_ISDN_AUDIO */
3691                                         case 'S':       /* SUSPEND */
3692                                                 p++;
3693                                                 isdn_tty_get_msnstr(ds, &p);
3694                                                 isdn_tty_suspend(ds, info, m);
3695                                                 break;
3696                                         case 'R':       /* RESUME */
3697                                                 p++;
3698                                                 isdn_tty_get_msnstr(ds, &p);
3699                                                 isdn_tty_resume(ds, info, m);
3700                                                 break;
3701                                         case 'M':       /* MESSAGE */
3702                                                 p++;
3703                                                 isdn_tty_send_msg(info, m, p);
3704                                                 break;
3705                                         default:
3706                                                 PARSE_ERROR;
3707                                 }
3708                                 break;
3709                         case '&':
3710                                 p++;
3711                                 if (isdn_tty_cmd_ATand(&p, info))
3712                                         return;
3713                                 break;
3714                         default:
3715                                 PARSE_ERROR;
3716                 }
3717         }
3718 #ifdef CONFIG_ISDN_AUDIO
3719         if (!info->vonline)
3720 #endif
3721                 isdn_tty_modem_result(RESULT_OK, info);
3722 }
3723
3724 /* Need own toupper() because standard-toupper is not available
3725  * within modules.
3726  */
3727 #define my_toupper(c) (((c>='a')&&(c<='z'))?(c&0xdf):c)
3728
3729 /*
3730  * Perform line-editing of AT-commands
3731  *
3732  * Parameters:
3733  *   p        inputbuffer
3734  *   count    length of buffer
3735  *   channel  index to line (minor-device)
3736  */
3737 static int
3738 isdn_tty_edit_at(const char *p, int count, modem_info * info)
3739 {
3740         atemu *m = &info->emu;
3741         int total = 0;
3742         u_char c;
3743         char eb[2];
3744         int cnt;
3745
3746         for (cnt = count; cnt > 0; p++, cnt--) {
3747                 c = *p;
3748                 total++;
3749                 if (c == m->mdmreg[REG_CR] || c == m->mdmreg[REG_LF]) {
3750                         /* Separator (CR or LF) */
3751                         m->mdmcmd[m->mdmcmdl] = 0;
3752                         if (m->mdmreg[REG_ECHO] & BIT_ECHO) {
3753                                 eb[0] = c;
3754                                 eb[1] = 0;
3755                                 isdn_tty_at_cout(eb, info);
3756                         }
3757                         if ((m->mdmcmdl >= 2) && (!(strncmp(m->mdmcmd, "AT", 2))))
3758                                 isdn_tty_parse_at(info);
3759                         m->mdmcmdl = 0;
3760                         continue;
3761                 }
3762                 if (c == m->mdmreg[REG_BS] && m->mdmreg[REG_BS] < 128) {
3763                         /* Backspace-Function */
3764                         if ((m->mdmcmdl > 2) || (!m->mdmcmdl)) {
3765                                 if (m->mdmcmdl)
3766                                         m->mdmcmdl--;
3767                                 if (m->mdmreg[REG_ECHO] & BIT_ECHO)
3768                                         isdn_tty_at_cout("\b", info);
3769                         }
3770                         continue;
3771                 }
3772                 if (cmdchar(c)) {
3773                         if (m->mdmreg[REG_ECHO] & BIT_ECHO) {
3774                                 eb[0] = c;
3775                                 eb[1] = 0;
3776                                 isdn_tty_at_cout(eb, info);
3777                         }
3778                         if (m->mdmcmdl < 255) {
3779                                 c = my_toupper(c);
3780                                 switch (m->mdmcmdl) {
3781                                         case 1:
3782                                                 if (c == 'T') {
3783                                                         m->mdmcmd[m->mdmcmdl] = c;
3784                                                         m->mdmcmd[++m->mdmcmdl] = 0;
3785                                                         break;
3786                                                 } else
3787                                                         m->mdmcmdl = 0;
3788                                                 /* Fall through, check for 'A' */
3789                                         case 0:
3790                                                 if (c == 'A') {
3791                                                         m->mdmcmd[m->mdmcmdl] = c;
3792                                                         m->mdmcmd[++m->mdmcmdl] = 0;
3793                                                 }
3794                                                 break;
3795                                         default:
3796                                                 m->mdmcmd[m->mdmcmdl] = c;
3797                                                 m->mdmcmd[++m->mdmcmdl] = 0;
3798                                 }
3799                         }
3800                 }
3801         }
3802         return total;
3803 }
3804
3805 /*
3806  * Switch all modem-channels who are online and got a valid
3807  * escape-sequence 1.5 seconds ago, to command-mode.
3808  * This function is called every second via timer-interrupt from within
3809  * timer-dispatcher isdn_timer_function()
3810  */
3811 void
3812 isdn_tty_modem_escape(void)
3813 {
3814         int ton = 0;
3815         int i;
3816         int midx;
3817
3818         for (i = 0; i < ISDN_MAX_CHANNELS; i++)
3819                 if (USG_MODEM(dev->usage[i]))
3820                         if ((midx = dev->m_idx[i]) >= 0) {
3821                                 modem_info *info = &dev->mdm.info[midx];
3822                                 if (info->online) {
3823                                         ton = 1;
3824                                         if ((info->emu.pluscount == 3) &&
3825                                             time_after(jiffies , info->emu.lastplus + PLUSWAIT2)) {
3826                                                 info->emu.pluscount = 0;
3827                                                 info->online = 0;
3828                                                 isdn_tty_modem_result(RESULT_OK, info);
3829                                         }
3830                                 }
3831                         }
3832         isdn_timer_ctrl(ISDN_TIMER_MODEMPLUS, ton);
3833 }
3834
3835 /*
3836  * Put a RING-message to all modem-channels who have the RI-bit set.
3837  * This function is called every second via timer-interrupt from within
3838  * timer-dispatcher isdn_timer_function()
3839  */
3840 void
3841 isdn_tty_modem_ring(void)
3842 {
3843         int ton = 0;
3844         int i;
3845
3846         for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
3847                 modem_info *info = &dev->mdm.info[i];
3848                 if (info->msr & UART_MSR_RI) {
3849                         ton = 1;
3850                         isdn_tty_modem_result(RESULT_RING, info);
3851                 }
3852         }
3853         isdn_timer_ctrl(ISDN_TIMER_MODEMRING, ton);
3854 }
3855
3856 /*
3857  * For all online tty's, try sending data to
3858  * the lower levels.
3859  */
3860 void
3861 isdn_tty_modem_xmit(void)
3862 {
3863         int ton = 1;
3864         int i;
3865
3866         for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
3867                 modem_info *info = &dev->mdm.info[i];
3868                 if (info->online) {
3869                         ton = 1;
3870                         isdn_tty_senddown(info);
3871                         isdn_tty_tint(info);
3872                 }
3873         }
3874         isdn_timer_ctrl(ISDN_TIMER_MODEMXMIT, ton);
3875 }
3876
3877 /*
3878  * Check all channels if we have a 'no carrier' timeout.
3879  * Timeout value is set by Register S7.
3880  */
3881 void
3882 isdn_tty_carrier_timeout(void)
3883 {
3884         int ton = 0;
3885         int i;
3886
3887         for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
3888                 modem_info *info = &dev->mdm.info[i];
3889                 if (info->dialing) {
3890                         if (info->emu.carrierwait++ > info->emu.mdmreg[REG_WAITC]) {
3891                                 info->dialing = 0;
3892                                 isdn_tty_modem_result(RESULT_NO_CARRIER, info);
3893                                 isdn_tty_modem_hup(info, 1);
3894                         }
3895                         else
3896                                 ton = 1;
3897                 }
3898         }
3899         isdn_timer_ctrl(ISDN_TIMER_CARRIER, ton);
3900 }