drivers/isdn/hisax/hfc_usb.c

   1 /*
   2  * hfc_usb.c
   3  *
   4  * $Id: hfc_usb.c,v 2.3.2.13 2006/02/17 17:17:22 mbachem Exp $
   5  *
   6  * modular HiSax ISDN driver for Colognechip HFC-S USB chip
   7  *
   8  * Authors : Peter Sprenger  (sprenger@moving-bytes.de)
   9  *           Martin Bachem   (info@colognechip.com)
  10  *
  11  *           based on the first hfc_usb driver of
  12  *           Werner Cornelius (werner@isdn-development.de)
  13  *
  14  * This program is free software; you can redistribute it and/or modify
  15  * it under the terms of the GNU General Public License as published by
  16  * the Free Software Foundation; either version 2, or (at your option)
  17  * any later version.
  18  *
  19  * This program is distributed in the hope that it will be useful,
  20  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  21  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22  * GNU General Public License for more details.
  23  *
  24  * You should have received a copy of the GNU General Public License
  25  * along with this program; if not, write to the Free Software
  26  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  27  *
  28  * See Version Histroy at the bottom of this file
  29  *
  30 */
  31
  32 #include <linux/types.h>
  33 #include <linux/stddef.h>
  34 #include <linux/timer.h>
  35 #include <linux/init.h>
  36 #include <linux/module.h>
  37 #include <linux/kernel_stat.h>
  38 #include <linux/usb.h>
  39 #include <linux/kernel.h>
  40 #include <linux/smp_lock.h>
  41 #include <linux/sched.h>
  42 #include "hisax.h"
  43 #include "hisax_if.h"
  44 #include "hfc_usb.h"
  45
  46 static const char *hfcusb_revision =
  47     "$Revision: 2.3.2.13 $ $Date: 2006/02/17 17:17:22 $ ";
  48
  49 /* Hisax debug support
  50 * use "modprobe debug=x" where x is bitfield of USB_DBG & ISDN_DBG
  51 */
  52 #ifdef CONFIG_HISAX_DEBUG
  53 #include <linux/moduleparam.h>
  54 #define __debug_variable hfc_debug
  55 #include "hisax_debug.h"
  56 static u_int debug;
  57 module_param(debug, uint, 0);
  58 static int hfc_debug;
  59 #endif
  60
  61 /* private vendor specific data */
  62 typedef struct {
  63         __u8 led_scheme;        // led display scheme
  64         signed short led_bits[8];       // array of 8 possible LED bitmask settings
  65         char *vend_name;        // device name
  66 } hfcsusb_vdata;
  67
  68 /****************************************/
  69 /* data defining the devices to be used */
  70 /****************************************/
  71 static struct usb_device_id hfcusb_idtab[] = {
  72         {
  73          USB_DEVICE(0x0959, 0x2bd0),
  74          .driver_info = (unsigned long) &((hfcsusb_vdata)
  75                           {LED_OFF, {4, 0, 2, 1},
  76                            "ISDN USB TA (Cologne Chip HFC-S USB based)"}),
  77         },
  78         {
  79          USB_DEVICE(0x0675, 0x1688),
  80          .driver_info = (unsigned long) &((hfcsusb_vdata)
  81                           {LED_SCHEME1, {1, 2, 0, 0},
  82                            "DrayTek miniVigor 128 USB ISDN TA"}),
  83         },
  84         {
  85          USB_DEVICE(0x07b0, 0x0007),
  86          .driver_info = (unsigned long) &((hfcsusb_vdata)
  87                           {LED_SCHEME1, {0x80, -64, -32, -16},
  88                            "Billion tiny USB ISDN TA 128"}),
  89         },
  90         {
  91          USB_DEVICE(0x0742, 0x2008),
  92          .driver_info = (unsigned long) &((hfcsusb_vdata)
  93                           {LED_SCHEME1, {4, 0, 2, 1},
  94                            "Stollmann USB TA"}),
  95          },
  96         {
  97          USB_DEVICE(0x0742, 0x2009),
  98          .driver_info = (unsigned long) &((hfcsusb_vdata)
  99                           {LED_SCHEME1, {4, 0, 2, 1},
 100                            "Aceex USB ISDN TA"}),
 101          },
 102         {
 103          USB_DEVICE(0x0742, 0x200A),
 104          .driver_info = (unsigned long) &((hfcsusb_vdata)
 105                           {LED_SCHEME1, {4, 0, 2, 1},
 106                            "OEM USB ISDN TA"}),
 107          },
 108         {
 109          USB_DEVICE(0x08e3, 0x0301),
 110          .driver_info = (unsigned long) &((hfcsusb_vdata)
 111                           {LED_SCHEME1, {2, 0, 1, 4},
 112                            "Olitec USB RNIS"}),
 113          },
 114         {
 115          USB_DEVICE(0x07fa, 0x0846),
 116          .driver_info = (unsigned long) &((hfcsusb_vdata)
 117                           {LED_SCHEME1, {0x80, -64, -32, -16},
 118                            "Bewan Modem RNIS USB"}),
 119          },
 120         {
 121          USB_DEVICE(0x07fa, 0x0847),
 122          .driver_info = (unsigned long) &((hfcsusb_vdata)
 123                           {LED_SCHEME1, {0x80, -64, -32, -16},
 124                            "Djinn Numeris USB"}),
 125          },
 126         {
 127          USB_DEVICE(0x07b0, 0x0006),
 128          .driver_info = (unsigned long) &((hfcsusb_vdata)
 129                           {LED_SCHEME1, {0x80, -64, -32, -16},
 130                            "Twister ISDN TA"}),
 131          },
 132         { }
 133 };
 134
 135 /***************************************************************/
 136 /* structure defining input+output fifos (interrupt/bulk mode) */
 137 /***************************************************************/
 138 struct usb_fifo;                /* forward definition */
 139 typedef struct iso_urb_struct {
 140         struct urb *purb;
 141         __u8 buffer[ISO_BUFFER_SIZE];   /* buffer incoming/outgoing data */
 142         struct usb_fifo *owner_fifo;    /* pointer to owner fifo */
 143 } iso_urb_struct;
 144
 145
 146 struct hfcusb_data;             /* forward definition */
 147 typedef struct usb_fifo {
 148         int fifonum;            /* fifo index attached to this structure */
 149         int active;             /* fifo is currently active */
 150         struct hfcusb_data *hfc;        /* pointer to main structure */
 151         int pipe;               /* address of endpoint */
 152         __u8 usb_packet_maxlen; /* maximum length for usb transfer */
 153         unsigned int max_size;  /* maximum size of receive/send packet */
 154         __u8 intervall;         /* interrupt interval */
 155         struct sk_buff *skbuff; /* actual used buffer */
 156         struct urb *urb;        /* transfer structure for usb routines */
 157         __u8 buffer[128];       /* buffer incoming/outgoing data */
 158         int bit_line;           /* how much bits are in the fifo? */
 159
 160         volatile __u8 usb_transfer_mode;        /* switched between ISO and INT */
 161         iso_urb_struct iso[2];  /* need two urbs to have one always for pending */
 162         struct hisax_if *hif;   /* hisax interface */
 163         int delete_flg;         /* only delete skbuff once */
 164         int last_urblen;        /* remember length of last packet */
 165
 166 } usb_fifo;
 167
 168 /*********************************************/
 169 /* structure holding all data for one device */
 170 /*********************************************/
 171 typedef struct hfcusb_data {
 172         /* HiSax Interface for loadable Layer1 drivers */
 173         struct hisax_d_if d_if; /* see hisax_if.h */
 174         struct hisax_b_if b_if[2];      /* see hisax_if.h */
 175         int protocol;
 176
 177         struct usb_device *dev; /* our device */
 178         int if_used;            /* used interface number */
 179         int alt_used;           /* used alternate config */
 180         int ctrl_paksize;       /* control pipe packet size */
 181         int ctrl_in_pipe, ctrl_out_pipe;        /* handles for control pipe */
 182         int cfg_used;           /* configuration index used */
 183         int vend_idx;           /* vendor found */
 184         int b_mode[2];          /* B-channel mode */
 185         int l1_activated;       /* layer 1 activated */
 186         int disc_flag;          /* 'true' if device was disonnected to avoid some USB actions */
 187         int packet_size, iso_packet_size;
 188
 189         /* control pipe background handling */
 190         ctrl_buft ctrl_buff[HFC_CTRL_BUFSIZE];  /* buffer holding queued data */
 191         volatile int ctrl_in_idx, ctrl_out_idx, ctrl_cnt;       /* input/output pointer + count */
 192         struct urb *ctrl_urb;   /* transfer structure for control channel */
 193
 194         struct usb_ctrlrequest ctrl_write;      /* buffer for control write request */
 195         struct usb_ctrlrequest ctrl_read;       /* same for read request */
 196
 197         __u8 old_led_state, led_state, led_new_data, led_b_active;
 198
 199         volatile __u8 threshold_mask;   /* threshold actually reported */
 200         volatile __u8 bch_enables;      /* or mask for sctrl_r and sctrl register values */
 201
 202         usb_fifo fifos[HFCUSB_NUM_FIFOS];       /* structure holding all fifo data */
 203
 204         volatile __u8 l1_state; /* actual l1 state */
 205         struct timer_list t3_timer;     /* timer 3 for activation/deactivation */
 206         struct timer_list t4_timer;     /* timer 4 for activation/deactivation */
 207 } hfcusb_data;
 208
 209
 210 static void collect_rx_frame(usb_fifo * fifo, __u8 * data, int len,
 211                              int finish);
 212
 213
 214 static inline const char *
 215 symbolic(struct hfcusb_symbolic_list list[], const int num)
 216 {
 217         int i;
 218         for (i = 0; list[i].name != NULL; i++)
 219                 if (list[i].num == num)
 220                         return (list[i].name);
 221         return "<unknown ERROR>";
 222 }
 223
 224
 225 /******************************************************/
 226 /* start next background transfer for control channel */
 227 /******************************************************/
 228 static void
 229 ctrl_start_transfer(hfcusb_data * hfc)
 230 {
 231         if (hfc->ctrl_cnt) {
 232                 hfc->ctrl_urb->pipe = hfc->ctrl_out_pipe;
 233                 hfc->ctrl_urb->setup_packet = (u_char *) & hfc->ctrl_write;
 234                 hfc->ctrl_urb->transfer_buffer = NULL;
 235                 hfc->ctrl_urb->transfer_buffer_length = 0;
 236                 hfc->ctrl_write.wIndex =
 237                     cpu_to_le16(hfc->ctrl_buff[hfc->ctrl_out_idx].hfc_reg);
 238                 hfc->ctrl_write.wValue =
 239                     cpu_to_le16(hfc->ctrl_buff[hfc->ctrl_out_idx].reg_val);
 240
 241                 usb_submit_urb(hfc->ctrl_urb, GFP_ATOMIC);      /* start transfer */
 242         }
 243 }                               /* ctrl_start_transfer */
 244
 245 /************************************/
 246 /* queue a control transfer request */
 247 /* return 0 on success.             */
 248 /************************************/
 249 static int
 250 queue_control_request(hfcusb_data * hfc, __u8 reg, __u8 val, int action)
 251 {
 252         ctrl_buft *buf;
 253
 254         if (hfc->ctrl_cnt >= HFC_CTRL_BUFSIZE)
 255                 return (1);     /* no space left */
 256         buf = &hfc->ctrl_buff[hfc->ctrl_in_idx];        /* pointer to new index */
 257         buf->hfc_reg = reg;
 258         buf->reg_val = val;
 259         buf->action = action;
 260         if (++hfc->ctrl_in_idx >= HFC_CTRL_BUFSIZE)
 261                 hfc->ctrl_in_idx = 0;   /* pointer wrap */
 262         if (++hfc->ctrl_cnt == 1)
 263                 ctrl_start_transfer(hfc);
 264         return (0);
 265 }                               /* queue_control_request */
 266
 267 static int
 268 control_action_handler(hfcusb_data * hfc, int reg, int val, int action)
 269 {
 270         if (!action)
 271                 return (1);     /* no action defined */
 272         return (0);
 273 }
 274
 275 /***************************************************************/
 276 /* control completion routine handling background control cmds */
 277 /***************************************************************/
 278 static void
 279 ctrl_complete(struct urb *urb)
 280 {
 281         hfcusb_data *hfc = (hfcusb_data *) urb->context;
 282         ctrl_buft *buf;
 283
 284         urb->dev = hfc->dev;
 285         if (hfc->ctrl_cnt) {
 286                 buf = &hfc->ctrl_buff[hfc->ctrl_out_idx];
 287                 control_action_handler(hfc, buf->hfc_reg, buf->reg_val,
 288                                        buf->action);
 289
 290                 hfc->ctrl_cnt--;        /* decrement actual count */
 291                 if (++hfc->ctrl_out_idx >= HFC_CTRL_BUFSIZE)
 292                         hfc->ctrl_out_idx = 0;  /* pointer wrap */
 293
 294                 ctrl_start_transfer(hfc);       /* start next transfer */
 295         }
 296 }                               /* ctrl_complete */
 297
 298 /***************************************************/
 299 /* write led data to auxport & invert if necessary */
 300 /***************************************************/
 301 static void
 302 write_led(hfcusb_data * hfc, __u8 led_state)
 303 {
 304         if (led_state != hfc->old_led_state) {
 305                 hfc->old_led_state = led_state;
 306                 queue_control_request(hfc, HFCUSB_P_DATA, led_state, 1);
 307         }
 308 }
 309
 310 /**************************/
 311 /* handle LED bits        */
 312 /**************************/
 313 static void
 314 set_led_bit(hfcusb_data * hfc, signed short led_bits, int unset)
 315 {
 316         if (unset) {
 317                 if (led_bits < 0)
 318                         hfc->led_state |= abs(led_bits);
 319                 else
 320                         hfc->led_state &= ~led_bits;
 321         } else {
 322                 if (led_bits < 0)
 323                         hfc->led_state &= ~abs(led_bits);
 324                 else
 325                         hfc->led_state |= led_bits;
 326         }
 327 }
 328
 329 /**************************/
 330 /* handle LED requests    */
 331 /**************************/
 332 static void
 333 handle_led(hfcusb_data * hfc, int event)
 334 {
 335         hfcsusb_vdata *driver_info =
 336             (hfcsusb_vdata *) hfcusb_idtab[hfc->vend_idx].driver_info;
 337
 338         /* if no scheme -> no LED action */
 339         if (driver_info->led_scheme == LED_OFF)
 340                 return;
 341
 342         switch (event) {
 343                 case LED_POWER_ON:
 344                         set_led_bit(hfc, driver_info->led_bits[0],
 345                                     0);
 346                         set_led_bit(hfc, driver_info->led_bits[1],
 347                                     1);
 348                         set_led_bit(hfc, driver_info->led_bits[2],
 349                                     1);
 350                         set_led_bit(hfc, driver_info->led_bits[3],
 351                                     1);
 352                         break;
 353                 case LED_POWER_OFF:     /* no Power off handling */
 354                         break;
 355                 case LED_S0_ON:
 356                         set_led_bit(hfc, driver_info->led_bits[1],
 357                                     0);
 358                         break;
 359                 case LED_S0_OFF:
 360                         set_led_bit(hfc, driver_info->led_bits[1],
 361                                     1);
 362                         break;
 363                 case LED_B1_ON:
 364                         set_led_bit(hfc, driver_info->led_bits[2],
 365                                     0);
 366                         break;
 367                 case LED_B1_OFF:
 368                         set_led_bit(hfc, driver_info->led_bits[2],
 369                                     1);
 370                         break;
 371                 case LED_B2_ON:
 372                         set_led_bit(hfc, driver_info->led_bits[3],
 373                                     0);
 374                         break;
 375                 case LED_B2_OFF:
 376                         set_led_bit(hfc, driver_info->led_bits[3],
 377                                     1);
 378                         break;
 379         }
 380         write_led(hfc, hfc->led_state);
 381 }
 382
 383 /********************************/
 384 /* called when timer t3 expires */
 385 /********************************/
 386 static void
 387 l1_timer_expire_t3(hfcusb_data * hfc)
 388 {
 389         hfc->d_if.ifc.l1l2(&hfc->d_if.ifc, PH_DEACTIVATE | INDICATION,
 390                            NULL);
 391 #ifdef CONFIG_HISAX_DEBUG
 392         DBG(ISDN_DBG,
 393             "HFC-S USB: PH_DEACTIVATE | INDICATION sent (T3 expire)");
 394 #endif
 395         hfc->l1_activated = false;
 396         handle_led(hfc, LED_S0_OFF);
 397         /* deactivate : */
 398         queue_control_request(hfc, HFCUSB_STATES, 0x10, 1);
 399         queue_control_request(hfc, HFCUSB_STATES, 3, 1);
 400 }
 401
 402 /********************************/
 403 /* called when timer t4 expires */
 404 /********************************/
 405 static void
 406 l1_timer_expire_t4(hfcusb_data * hfc)
 407 {
 408         hfc->d_if.ifc.l1l2(&hfc->d_if.ifc, PH_DEACTIVATE | INDICATION,
 409                            NULL);
 410 #ifdef CONFIG_HISAX_DEBUG
 411         DBG(ISDN_DBG,
 412             "HFC-S USB: PH_DEACTIVATE | INDICATION sent (T4 expire)");
 413 #endif
 414         hfc->l1_activated = false;
 415         handle_led(hfc, LED_S0_OFF);
 416 }
 417
 418 /*****************************/
 419 /* handle S0 state changes   */
 420 /*****************************/
 421 static void
 422 state_handler(hfcusb_data * hfc, __u8 state)
 423 {
 424         __u8 old_state;
 425
 426         old_state = hfc->l1_state;
 427         if (state == old_state || state < 1 || state > 8)
 428                 return;
 429
 430 #ifdef CONFIG_HISAX_DEBUG
 431         DBG(ISDN_DBG, "HFC-S USB: new S0 state:%d old_state:%d", state,
 432             old_state);
 433 #endif
 434         if (state < 4 || state == 7 || state == 8) {
 435                 if (timer_pending(&hfc->t3_timer))
 436                         del_timer(&hfc->t3_timer);
 437 #ifdef CONFIG_HISAX_DEBUG
 438                 DBG(ISDN_DBG, "HFC-S USB: T3 deactivated");
 439 #endif
 440         }
 441         if (state >= 7) {
 442                 if (timer_pending(&hfc->t4_timer))
 443                         del_timer(&hfc->t4_timer);
 444 #ifdef CONFIG_HISAX_DEBUG
 445                 DBG(ISDN_DBG, "HFC-S USB: T4 deactivated");
 446 #endif
 447         }
 448
 449         if (state == 7 && !hfc->l1_activated) {
 450                 hfc->d_if.ifc.l1l2(&hfc->d_if.ifc,
 451                                    PH_ACTIVATE | INDICATION, NULL);
 452 #ifdef CONFIG_HISAX_DEBUG
 453                 DBG(ISDN_DBG, "HFC-S USB: PH_ACTIVATE | INDICATION sent");
 454 #endif
 455                 hfc->l1_activated = true;
 456                 handle_led(hfc, LED_S0_ON);
 457         } else if (state <= 3 /* && activated */ ) {
 458                 if (old_state == 7 || old_state == 8) {
 459 #ifdef CONFIG_HISAX_DEBUG
 460                         DBG(ISDN_DBG, "HFC-S USB: T4 activated");
 461 #endif
 462                         if (!timer_pending(&hfc->t4_timer)) {
 463                                 hfc->t4_timer.expires =
 464                                     jiffies + (HFC_TIMER_T4 * HZ) / 1000;
 465                                 add_timer(&hfc->t4_timer);
 466                         }
 467                 } else {
 468                         hfc->d_if.ifc.l1l2(&hfc->d_if.ifc,
 469                                            PH_DEACTIVATE | INDICATION,
 470                                            NULL);
 471 #ifdef CONFIG_HISAX_DEBUG
 472                         DBG(ISDN_DBG,
 473                             "HFC-S USB: PH_DEACTIVATE | INDICATION sent");
 474 #endif
 475                         hfc->l1_activated = false;
 476                         handle_led(hfc, LED_S0_OFF);
 477                 }
 478         }
 479         hfc->l1_state = state;
 480 }
 481
 482 /* prepare iso urb */
 483 static void
 484 fill_isoc_urb(struct urb *urb, struct usb_device *dev, unsigned int pipe,
 485               void *buf, int num_packets, int packet_size, int interval,
 486               usb_complete_t complete, void *context)
 487 {
 488         int k;
 489
 490         spin_lock_init(&urb->lock);
 491         urb->dev = dev;
 492         urb->pipe = pipe;
 493         urb->complete = complete;
 494         urb->number_of_packets = num_packets;
 495         urb->transfer_buffer_length = packet_size * num_packets;
 496         urb->context = context;
 497         urb->transfer_buffer = buf;
 498         urb->transfer_flags = URB_ISO_ASAP;
 499         urb->actual_length = 0;
 500         urb->interval = interval;
 501         for (k = 0; k < num_packets; k++) {
 502                 urb->iso_frame_desc[k].offset = packet_size * k;
 503                 urb->iso_frame_desc[k].length = packet_size;
 504                 urb->iso_frame_desc[k].actual_length = 0;
 505         }
 506 }
 507
 508 /* allocs urbs and start isoc transfer with two pending urbs to avoid
 509    gaps in the transfer chain */
 510 static int
 511 start_isoc_chain(usb_fifo * fifo, int num_packets_per_urb,
 512                  usb_complete_t complete, int packet_size)
 513 {
 514         int i, k, errcode;
 515
 516         printk(KERN_INFO "HFC-S USB: starting ISO-chain for Fifo %i\n",
 517                fifo->fifonum);
 518
 519         /* allocate Memory for Iso out Urbs */
 520         for (i = 0; i < 2; i++) {
 521                 if (!(fifo->iso[i].purb)) {
 522                         fifo->iso[i].purb =
 523                             usb_alloc_urb(num_packets_per_urb, GFP_KERNEL);
 524                         if (!(fifo->iso[i].purb)) {
 525                                 printk(KERN_INFO
 526                                        "alloc urb for fifo %i failed!!!",
 527                                        fifo->fifonum);
 528                         }
 529                         fifo->iso[i].owner_fifo = (struct usb_fifo *) fifo;
 530
 531                         /* Init the first iso */
 532                         if (ISO_BUFFER_SIZE >=
 533                             (fifo->usb_packet_maxlen *
 534                              num_packets_per_urb)) {
 535                                 fill_isoc_urb(fifo->iso[i].purb,
 536                                               fifo->hfc->dev, fifo->pipe,
 537                                               fifo->iso[i].buffer,
 538                                               num_packets_per_urb,
 539                                               fifo->usb_packet_maxlen,
 540                                               fifo->intervall, complete,
 541                                               &fifo->iso[i]);
 542                                 memset(fifo->iso[i].buffer, 0,
 543                                        sizeof(fifo->iso[i].buffer));
 544                                 /* defining packet delimeters in fifo->buffer */
 545                                 for (k = 0; k < num_packets_per_urb; k++) {
 546                                         fifo->iso[i].purb->
 547                                             iso_frame_desc[k].offset =
 548                                             k * packet_size;
 549                                         fifo->iso[i].purb->
 550                                             iso_frame_desc[k].length =
 551                                             packet_size;
 552                                 }
 553                         } else {
 554                                 printk(KERN_INFO
 555                                        "HFC-S USB: ISO Buffer size to small!\n");
 556                         }
 557                 }
 558                 fifo->bit_line = BITLINE_INF;
 559
 560                 errcode = usb_submit_urb(fifo->iso[i].purb, GFP_KERNEL);
 561                 fifo->active = (errcode >= 0) ? 1 : 0;
 562                 if (errcode < 0) {
 563                         printk(KERN_INFO "HFC-S USB: %s  URB nr:%d\n",
 564                                symbolic(urb_errlist, errcode), i);
 565                 };
 566         }
 567         return (fifo->active);
 568 }
 569
 570 /* stops running iso chain and frees their pending urbs */
 571 static void
 572 stop_isoc_chain(usb_fifo * fifo)
 573 {
 574         int i;
 575
 576         for (i = 0; i < 2; i++) {
 577                 if (fifo->iso[i].purb) {
 578 #ifdef CONFIG_HISAX_DEBUG
 579                         DBG(USB_DBG,
 580                             "HFC-S USB: Stopping iso chain for fifo %i.%i",
 581                             fifo->fifonum, i);
 582 #endif
 583                         usb_unlink_urb(fifo->iso[i].purb);
 584                         usb_free_urb(fifo->iso[i].purb);
 585                         fifo->iso[i].purb = NULL;
 586                 }
 587         }
 588         if (fifo->urb) {
 589                 usb_unlink_urb(fifo->urb);
 590                 usb_free_urb(fifo->urb);
 591                 fifo->urb = NULL;
 592         }
 593         fifo->active = 0;
 594 }
 595
 596 /* defines how much ISO packets are handled in one URB */
 597 static int iso_packets[8] =
 598     { ISOC_PACKETS_B, ISOC_PACKETS_B, ISOC_PACKETS_B, ISOC_PACKETS_B,
 599         ISOC_PACKETS_D, ISOC_PACKETS_D, ISOC_PACKETS_D, ISOC_PACKETS_D
 600 };
 601
 602 /*****************************************************/
 603 /* transmit completion routine for all ISO tx fifos */
 604 /*****************************************************/
 605 static void
 606 tx_iso_complete(struct urb *urb)
 607 {
 608         iso_urb_struct *context_iso_urb = (iso_urb_struct *) urb->context;
 609         usb_fifo *fifo = context_iso_urb->owner_fifo;
 610         hfcusb_data *hfc = fifo->hfc;
 611         int k, tx_offset, num_isoc_packets, sink, len, current_len,
 612             errcode;
 613         int frame_complete, transp_mode, fifon, status;
 614         __u8 threshbit;
 615         __u8 threshtable[8] = { 1, 2, 4, 8, 0x10, 0x20, 0x40, 0x80 };
 616
 617         fifon = fifo->fifonum;
 618         status = urb->status;
 619
 620         tx_offset = 0;
 621
 622         if (fifo->active && !status) {
 623                 transp_mode = 0;
 624                 if (fifon < 4 && hfc->b_mode[fifon / 2] == L1_MODE_TRANS)
 625                         transp_mode = true;
 626
 627                 /* is FifoFull-threshold set for our channel? */
 628                 threshbit = threshtable[fifon] & hfc->threshold_mask;
 629                 num_isoc_packets = iso_packets[fifon];
 630
 631                 /* predict dataflow to avoid fifo overflow */
 632                 if (fifon >= HFCUSB_D_TX) {
 633                         sink = (threshbit) ? SINK_DMIN : SINK_DMAX;
 634                 } else {
 635                         sink = (threshbit) ? SINK_MIN : SINK_MAX;
 636                 }
 637                 fill_isoc_urb(urb, fifo->hfc->dev, fifo->pipe,
 638                               context_iso_urb->buffer, num_isoc_packets,
 639                               fifo->usb_packet_maxlen, fifo->intervall,
 640                               tx_iso_complete, urb->context);
 641                 memset(context_iso_urb->buffer, 0,
 642                        sizeof(context_iso_urb->buffer));
 643                 frame_complete = false;
 644                 /* Generate next Iso Packets */
 645                 for (k = 0; k < num_isoc_packets; ++k) {
 646                         if (fifo->skbuff) {
 647                                 len = fifo->skbuff->len;
 648                                 /* we lower data margin every msec */
 649                                 fifo->bit_line -= sink;
 650                                 current_len = (0 - fifo->bit_line) / 8;
 651                                 /* maximum 15 byte for every ISO packet makes our life easier */
 652                                 if (current_len > 14)
 653                                         current_len = 14;
 654                                 current_len =
 655                                     (len <=
 656                                      current_len) ? len : current_len;
 657                                 /* how much bit do we put on the line? */
 658                                 fifo->bit_line += current_len * 8;
 659
 660                                 context_iso_urb->buffer[tx_offset] = 0;
 661                                 if (current_len == len) {
 662                                         if (!transp_mode) {
 663                                                 /* here frame completion */
 664                                                 context_iso_urb->
 665                                                     buffer[tx_offset] = 1;
 666                                                 /* add 2 byte flags and 16bit CRC at end of ISDN frame */
 667                                                 fifo->bit_line += 32;
 668                                         }
 669                                         frame_complete = true;
 670                                 }
 671
 672                                 memcpy(context_iso_urb->buffer +
 673                                        tx_offset + 1, fifo->skbuff->data,
 674                                        current_len);
 675                                 skb_pull(fifo->skbuff, current_len);
 676
 677                                 /* define packet delimeters within the URB buffer */
 678                                 urb->iso_frame_desc[k].offset = tx_offset;
 679                                 urb->iso_frame_desc[k].length =
 680                                     current_len + 1;
 681
 682                                 tx_offset += (current_len + 1);
 683                         } else {
 684                                 urb->iso_frame_desc[k].offset =
 685                                     tx_offset++;
 686
 687                                 urb->iso_frame_desc[k].length = 1;
 688                                 fifo->bit_line -= sink; /* we lower data margin every msec */
 689
 690                                 if (fifo->bit_line < BITLINE_INF) {
 691                                         fifo->bit_line = BITLINE_INF;
 692                                 }
 693                         }
 694
 695                         if (frame_complete) {
 696                                 fifo->delete_flg = true;
 697                                 fifo->hif->l1l2(fifo->hif,
 698                                                 PH_DATA | CONFIRM,
 699                                                 (void *) (unsigned long) fifo->skbuff->
 700                                                 truesize);
 701                                 if (fifo->skbuff && fifo->delete_flg) {
 702                                         dev_kfree_skb_any(fifo->skbuff);
 703                                         fifo->skbuff = NULL;
 704                                         fifo->delete_flg = false;
 705                                 }
 706                                 frame_complete = false;
 707                         }
 708                 }
 709                 errcode = usb_submit_urb(urb, GFP_ATOMIC);
 710                 if (errcode < 0) {
 711                         printk(KERN_INFO
 712                                "HFC-S USB: error submitting ISO URB: %d \n",
 713                                errcode);
 714                 }
 715         } else {
 716                 if (status && !hfc->disc_flag) {
 717                         printk(KERN_INFO
 718                                "HFC-S USB: tx_iso_complete : urb->status %s (%i), fifonum=%d\n",
 719                                symbolic(urb_errlist, status), status,
 720                                fifon);
 721                 }
 722         }
 723 }                               /* tx_iso_complete */
 724
 725 /*****************************************************/
 726 /* receive completion routine for all ISO tx fifos   */
 727 /*****************************************************/
 728 static void
 729 rx_iso_complete(struct urb *urb)
 730 {
 731         iso_urb_struct *context_iso_urb = (iso_urb_struct *) urb->context;
 732         usb_fifo *fifo = context_iso_urb->owner_fifo;
 733         hfcusb_data *hfc = fifo->hfc;
 734         int k, len, errcode, offset, num_isoc_packets, fifon, maxlen,
 735             status;
 736         unsigned int iso_status;
 737         __u8 *buf;
 738         static __u8 eof[8];
 739 #ifdef CONFIG_HISAX_DEBUG
 740         __u8 i;
 741 #endif
 742
 743         fifon = fifo->fifonum;
 744         status = urb->status;
 745
 746         if (urb->status == -EOVERFLOW) {
 747 #ifdef CONFIG_HISAX_DEBUG
 748                 DBG(USB_DBG,
 749                     "HFC-USB: ignoring USB DATAOVERRUN  for fifo  %i \n",
 750                     fifon);
 751 #endif
 752                 status = 0;
 753         }
 754         if (fifo->active && !status) {
 755                 num_isoc_packets = iso_packets[fifon];
 756                 maxlen = fifo->usb_packet_maxlen;
 757                 for (k = 0; k < num_isoc_packets; ++k) {
 758                         len = urb->iso_frame_desc[k].actual_length;
 759                         offset = urb->iso_frame_desc[k].offset;
 760                         buf = context_iso_urb->buffer + offset;
 761                         iso_status = urb->iso_frame_desc[k].status;
 762 #ifdef CONFIG_HISAX_DEBUG
 763                         if (iso_status && !hfc->disc_flag)
 764                                 DBG(USB_DBG,
 765                                     "HFC-S USB: ISO packet failure - status:%x",
 766                                     iso_status);
 767
 768                         if ((fifon == 5) && (debug > 1)) {
 769                                 printk(KERN_INFO
 770                                        "HFC-S USB: ISO-D-RX lst_urblen:%2d "
 771                                        "act_urblen:%2d max-urblen:%2d "
 772                                        "EOF:0x%0x DATA: ",
 773                                        fifo->last_urblen, len, maxlen,
 774                                        eof[5]);
 775                                 for (i = 0; i < len; i++)
 776                                         printk("%.2x ", buf[i]);
 777                                 printk("\n");
 778                         }
 779 #endif
 780                         if (fifo->last_urblen != maxlen) {
 781                                 /* the threshold mask is in the 2nd status byte */
 782                                 hfc->threshold_mask = buf[1];
 783                                 /* care for L1 state only for D-Channel
 784                                    to avoid overlapped iso completions */
 785                                 if (fifon == 5) {
 786                                         /* the S0 state is in the upper half
 787                                            of the 1st status byte */
 788                                         state_handler(hfc, buf[0] >> 4);
 789                                 }
 790                                 eof[fifon] = buf[0] & 1;
 791                                 if (len > 2)
 792                                         collect_rx_frame(fifo, buf + 2,
 793                                                          len - 2,
 794                                                          (len <
 795                                                           maxlen) ?
 796                                                          eof[fifon] : 0);
 797                         } else {
 798                                 collect_rx_frame(fifo, buf, len,
 799                                                  (len <
 800                                                   maxlen) ? eof[fifon] :
 801                                                  0);
 802                         }
 803                         fifo->last_urblen = len;
 804                 }
 805
 806                 fill_isoc_urb(urb, fifo->hfc->dev, fifo->pipe,
 807                               context_iso_urb->buffer, num_isoc_packets,
 808                               fifo->usb_packet_maxlen, fifo->intervall,
 809                               rx_iso_complete, urb->context);
 810                 errcode = usb_submit_urb(urb, GFP_ATOMIC);
 811                 if (errcode < 0) {
 812                         printk(KERN_INFO
 813                                "HFC-S USB: error submitting ISO URB: %d \n",
 814                                errcode);
 815                 }
 816         } else {
 817                 if (status && !hfc->disc_flag) {
 818                         printk(KERN_INFO
 819                                "HFC-S USB: rx_iso_complete : "
 820                                "urb->status %d, fifonum %d\n",
 821                                status, fifon);
 822                 }
 823         }
 824 }                               /* rx_iso_complete */
 825
 826 /*****************************************************/
 827 /* collect data from interrupt or isochron in        */
 828 /*****************************************************/
 829 static void
 830 collect_rx_frame(usb_fifo * fifo, __u8 * data, int len, int finish)
 831 {
 832         hfcusb_data *hfc = fifo->hfc;
 833         int transp_mode, fifon;
 834 #ifdef CONFIG_HISAX_DEBUG
 835         int i;
 836 #endif
 837         fifon = fifo->fifonum;
 838         transp_mode = 0;
 839         if (fifon < 4 && hfc->b_mode[fifon / 2] == L1_MODE_TRANS)
 840                 transp_mode = true;
 841
 842         if (!fifo->skbuff) {
 843                 fifo->skbuff = dev_alloc_skb(fifo->max_size + 3);
 844                 if (!fifo->skbuff) {
 845                         printk(KERN_INFO
 846                                "HFC-S USB: cannot allocate buffer (dev_alloc_skb) fifo:%d\n",
 847                                fifon);
 848                         return;
 849                 }
 850         }
 851         if (len) {
 852                 if (fifo->skbuff->len + len < fifo->max_size) {
 853                         memcpy(skb_put(fifo->skbuff, len), data, len);
 854                 } else {
 855 #ifdef CONFIG_HISAX_DEBUG
 856                         printk(KERN_INFO "HFC-S USB: ");
 857                         for (i = 0; i < 15; i++)
 858                                 printk("%.2x ",
 859                                        fifo->skbuff->data[fifo->skbuff->
 860                                                           len - 15 + i]);
 861                         printk("\n");
 862 #endif
 863                         printk(KERN_INFO
 864                                "HCF-USB: got frame exceeded fifo->max_size:%d on fifo:%d\n",
 865                                fifo->max_size, fifon);
 866                 }
 867         }
 868         if (transp_mode && fifo->skbuff->len >= 128) {
 869                 fifo->hif->l1l2(fifo->hif, PH_DATA | INDICATION,
 870                                 fifo->skbuff);
 871                 fifo->skbuff = NULL;
 872                 return;
 873         }
 874         /* we have a complete hdlc packet */
 875         if (finish) {
 876                 if ((!fifo->skbuff->data[fifo->skbuff->len - 1])
 877                     && (fifo->skbuff->len > 3)) {
 878                         /* remove CRC & status */
 879                         skb_trim(fifo->skbuff, fifo->skbuff->len - 3);
 880                         if (fifon == HFCUSB_PCM_RX) {
 881                                 fifo->hif->l1l2(fifo->hif,
 882                                                 PH_DATA_E | INDICATION,
 883                                                 fifo->skbuff);
 884                         } else
 885                                 fifo->hif->l1l2(fifo->hif,
 886                                                 PH_DATA | INDICATION,
 887                                                 fifo->skbuff);
 888                         fifo->skbuff = NULL;    /* buffer was freed from upper layer */
 889                 } else {
 890                         if (fifo->skbuff->len > 3) {
 891                                 printk(KERN_INFO
 892                                        "HFC-S USB: got frame %d bytes but CRC ERROR on fifo:%d!!!\n",
 893                                        fifo->skbuff->len, fifon);
 894 #ifdef CONFIG_HISAX_DEBUG
 895                                 if (debug > 1) {
 896                                         printk(KERN_INFO "HFC-S USB: ");
 897                                         for (i = 0; i < 15; i++)
 898                                                 printk("%.2x ",
 899                                                        fifo->skbuff->
 900                                                        data[fifo->skbuff->
 901                                                             len - 15 + i]);
 902                                         printk("\n");
 903                                 }
 904 #endif
 905                         }
 906 #ifdef CONFIG_HISAX_DEBUG
 907                         else {
 908                                 printk(KERN_INFO
 909                                        "HFC-S USB: frame to small (%d bytes)!!!\n",
 910                                        fifo->skbuff->len);
 911                         }
 912 #endif
 913                         skb_trim(fifo->skbuff, 0);
 914                 }
 915         }
 916 }
 917
 918 /***********************************************/
 919 /* receive completion routine for all rx fifos */
 920 /***********************************************/
 921 static void
 922 rx_complete(struct urb *urb)
 923 {
 924         int len;
 925         int status;
 926         __u8 *buf, maxlen, fifon;
 927         usb_fifo *fifo = (usb_fifo *) urb->context;
 928         hfcusb_data *hfc = fifo->hfc;
 929         static __u8 eof[8];
 930 #ifdef CONFIG_HISAX_DEBUG
 931         __u8 i;
 932 #endif
 933
 934         urb->dev = hfc->dev;    /* security init */
 935
 936         fifon = fifo->fifonum;
 937         if ((!fifo->active) || (urb->status)) {
 938 #ifdef CONFIG_HISAX_DEBUG
 939                 DBG(USB_DBG, "HFC-S USB: RX-Fifo %i is going down (%i)",
 940                     fifon, urb->status);
 941 #endif
 942                 fifo->urb->interval = 0;        /* cancel automatic rescheduling */
 943                 if (fifo->skbuff) {
 944                         dev_kfree_skb_any(fifo->skbuff);
 945                         fifo->skbuff = NULL;
 946                 }
 947                 return;
 948         }
 949         len = urb->actual_length;
 950         buf = fifo->buffer;
 951         maxlen = fifo->usb_packet_maxlen;
 952
 953 #ifdef CONFIG_HISAX_DEBUG
 954         if ((fifon == 5) && (debug > 1)) {
 955                 printk(KERN_INFO
 956                        "HFC-S USB: INT-D-RX lst_urblen:%2d act_urblen:%2d max-urblen:%2d EOF:0x%0x DATA: ",
 957                        fifo->last_urblen, len, maxlen, eof[5]);
 958                 for (i = 0; i < len; i++)
 959                         printk("%.2x ", buf[i]);
 960                 printk("\n");
 961         }
 962 #endif
 963
 964         if (fifo->last_urblen != fifo->usb_packet_maxlen) {
 965                 /* the threshold mask is in the 2nd status byte */
 966                 hfc->threshold_mask = buf[1];
 967                 /* the S0 state is in the upper half of the 1st status byte */
 968                 state_handler(hfc, buf[0] >> 4);
 969                 eof[fifon] = buf[0] & 1;
 970                 /* if we have more than the 2 status bytes -> collect data */
 971                 if (len > 2)
 972                         collect_rx_frame(fifo, buf + 2,
 973                                          urb->actual_length - 2,
 974                                          (len < maxlen) ? eof[fifon] : 0);
 975         } else {
 976                 collect_rx_frame(fifo, buf, urb->actual_length,
 977                                  (len < maxlen) ? eof[fifon] : 0);
 978         }
 979         fifo->last_urblen = urb->actual_length;
 980         status = usb_submit_urb(urb, GFP_ATOMIC);
 981         if (status) {
 982                 printk(KERN_INFO
 983                        "HFC-S USB: error resubmitting URN at rx_complete...\n");
 984         }
 985 }                               /* rx_complete */
 986
 987 /***************************************************/
 988 /* start the interrupt transfer for the given fifo */
 989 /***************************************************/
 990 static void
 991 start_int_fifo(usb_fifo * fifo)
 992 {
 993         int errcode;
 994
 995         printk(KERN_INFO "HFC-S USB: starting intr IN fifo:%d\n",
 996                fifo->fifonum);
 997
 998         if (!fifo->urb) {
 999                 fifo->urb = usb_alloc_urb(0, GFP_KERNEL);
1000                 if (!fifo->urb)
1001                         return;
1002         }
1003         usb_fill_int_urb(fifo->urb, fifo->hfc->dev, fifo->pipe,
1004                          fifo->buffer, fifo->usb_packet_maxlen,
1005                          rx_complete, fifo, fifo->intervall);
1006         fifo->active = 1;       /* must be marked active */
1007         errcode = usb_submit_urb(fifo->urb, GFP_KERNEL);
1008         if (errcode) {
1009                 printk(KERN_INFO
1010                        "HFC-S USB: submit URB error(start_int_info): status:%i\n",
1011                        errcode);
1012                 fifo->active = 0;
1013                 fifo->skbuff = NULL;
1014         }
1015 }                               /* start_int_fifo */
1016
1017 /*****************************/
1018 /* set the B-channel mode    */
1019 /*****************************/
1020 static void
1021 set_hfcmode(hfcusb_data * hfc, int channel, int mode)
1022 {
1023         __u8 val, idx_table[2] = { 0, 2 };
1024
1025         if (hfc->disc_flag) {
1026                 return;
1027         }
1028 #ifdef CONFIG_HISAX_DEBUG
1029         DBG(ISDN_DBG, "HFC-S USB: setting channel %d to mode %d", channel,
1030             mode);
1031 #endif
1032         hfc->b_mode[channel] = mode;
1033
1034         /* setup CON_HDLC */
1035         val = 0;
1036         if (mode != L1_MODE_NULL)
1037                 val = 8;        /* enable fifo? */
1038         if (mode == L1_MODE_TRANS)
1039                 val |= 2;       /* set transparent bit */
1040
1041         /* set FIFO to transmit register */
1042         queue_control_request(hfc, HFCUSB_FIFO, idx_table[channel], 1);
1043         queue_control_request(hfc, HFCUSB_CON_HDLC, val, 1);
1044         /* reset fifo */
1045         queue_control_request(hfc, HFCUSB_INC_RES_F, 2, 1);
1046         /* set FIFO to receive register */
1047         queue_control_request(hfc, HFCUSB_FIFO, idx_table[channel] + 1, 1);
1048         queue_control_request(hfc, HFCUSB_CON_HDLC, val, 1);
1049         /* reset fifo */
1050         queue_control_request(hfc, HFCUSB_INC_RES_F, 2, 1);
1051
1052         val = 0x40;
1053         if (hfc->b_mode[0])
1054                 val |= 1;
1055         if (hfc->b_mode[1])
1056                 val |= 2;
1057         queue_control_request(hfc, HFCUSB_SCTRL, val, 1);
1058
1059         val = 0;
1060         if (hfc->b_mode[0])
1061                 val |= 1;
1062         if (hfc->b_mode[1])
1063                 val |= 2;
1064         queue_control_request(hfc, HFCUSB_SCTRL_R, val, 1);
1065
1066         if (mode == L1_MODE_NULL) {
1067                 if (channel)
1068                         handle_led(hfc, LED_B2_OFF);
1069                 else
1070                         handle_led(hfc, LED_B1_OFF);
1071         } else {
1072                 if (channel)
1073                         handle_led(hfc, LED_B2_ON);
1074                 else
1075                         handle_led(hfc, LED_B1_ON);
1076         }
1077 }
1078
1079 static void
1080 hfc_usb_l2l1(struct hisax_if *my_hisax_if, int pr, void *arg)
1081 {
1082         usb_fifo *fifo = my_hisax_if->priv;
1083         hfcusb_data *hfc = fifo->hfc;
1084
1085         switch (pr) {
1086                 case PH_ACTIVATE | REQUEST:
1087                         if (fifo->fifonum == HFCUSB_D_TX) {
1088 #ifdef CONFIG_HISAX_DEBUG
1089                                 DBG(ISDN_DBG,
1090                                     "HFC_USB: hfc_usb_d_l2l1 D-chan: PH_ACTIVATE | REQUEST");
1091 #endif
1092                                 if (hfc->l1_state != 3
1093                                     && hfc->l1_state != 7) {
1094                                         hfc->d_if.ifc.l1l2(&hfc->d_if.ifc,
1095                                                            PH_DEACTIVATE |
1096                                                            INDICATION,
1097                                                            NULL);
1098 #ifdef CONFIG_HISAX_DEBUG
1099                                         DBG(ISDN_DBG,
1100                                             "HFC-S USB: PH_DEACTIVATE | INDICATION sent (not state 3 or 7)");
1101 #endif
1102                                 } else {
1103                                         if (hfc->l1_state == 7) {       /* l1 already active */
1104                                                 hfc->d_if.ifc.l1l2(&hfc->
1105                                                                    d_if.
1106                                                                    ifc,
1107                                                                    PH_ACTIVATE
1108                                                                    |
1109                                                                    INDICATION,
1110                                                                    NULL);
1111 #ifdef CONFIG_HISAX_DEBUG
1112                                                 DBG(ISDN_DBG,
1113                                                     "HFC-S USB: PH_ACTIVATE | INDICATION sent again ;)");
1114 #endif
1115                                         } else {
1116                                                 /* force sending sending INFO1 */
1117                                                 queue_control_request(hfc,
1118                                                                       HFCUSB_STATES,
1119                                                                       0x14,
1120                                                                       1);
1121                                                 mdelay(1);
1122                                                 /* start l1 activation */
1123                                                 queue_control_request(hfc,
1124                                                                       HFCUSB_STATES,
1125                                                                       0x04,
1126                                                                       1);
1127                                                 if (!timer_pending
1128                                                     (&hfc->t3_timer)) {
1129                                                         hfc->t3_timer.
1130                                                             expires =
1131                                                             jiffies +
1132                                                             (HFC_TIMER_T3 *
1133                                                              HZ) / 1000;
1134                                                         add_timer(&hfc->
1135                                                                   t3_timer);
1136                                                 }
1137                                         }
1138                                 }
1139                         } else {
1140 #ifdef CONFIG_HISAX_DEBUG
1141                                 DBG(ISDN_DBG,
1142                                     "HFC_USB: hfc_usb_d_l2l1 Bx-chan: PH_ACTIVATE | REQUEST");
1143 #endif
1144                                 set_hfcmode(hfc,
1145                                             (fifo->fifonum ==
1146                                              HFCUSB_B1_TX) ? 0 : 1,
1147                                             (long) arg);
1148                                 fifo->hif->l1l2(fifo->hif,
1149                                                 PH_ACTIVATE | INDICATION,
1150                                                 NULL);
1151                         }
1152                         break;
1153                 case PH_DEACTIVATE | REQUEST:
1154                         if (fifo->fifonum == HFCUSB_D_TX) {
1155 #ifdef CONFIG_HISAX_DEBUG
1156                                 DBG(ISDN_DBG,
1157                                     "HFC_USB: hfc_usb_d_l2l1 D-chan: PH_DEACTIVATE | REQUEST");
1158 #endif
1159                                 printk(KERN_INFO
1160                                        "HFC-S USB: ISDN TE device should not deativate...\n");
1161                         } else {
1162 #ifdef CONFIG_HISAX_DEBUG
1163                                 DBG(ISDN_DBG,
1164                                     "HFC_USB: hfc_usb_d_l2l1 Bx-chan: PH_DEACTIVATE | REQUEST");
1165 #endif
1166                                 set_hfcmode(hfc,
1167                                             (fifo->fifonum ==
1168                                              HFCUSB_B1_TX) ? 0 : 1,
1169                                             (int) L1_MODE_NULL);
1170                                 fifo->hif->l1l2(fifo->hif,
1171                                                 PH_DEACTIVATE | INDICATION,
1172                                                 NULL);
1173                         }
1174                         break;
1175                 case PH_DATA | REQUEST:
1176                         if (fifo->skbuff && fifo->delete_flg) {
1177                                 dev_kfree_skb_any(fifo->skbuff);
1178                                 fifo->skbuff = NULL;
1179                                 fifo->delete_flg = false;
1180                         }
1181                         fifo->skbuff = arg;     /* we have a new buffer */
1182                         break;
1183                 default:
1184                         printk(KERN_INFO
1185                                "HFC_USB: hfc_usb_d_l2l1: unkown state : %#x\n",
1186                                pr);
1187                         break;
1188         }
1189 }
1190
1191 /***************************************************************************/
1192 /* usb_init is called once when a new matching device is detected to setup */
1193 /* main parameters. It registers the driver at the main hisax module.      */
1194 /* on success 0 is returned.                                               */
1195 /***************************************************************************/
1196 static int
1197 usb_init(hfcusb_data * hfc)
1198 {
1199         usb_fifo *fifo;
1200         int i, err;
1201         u_char b;
1202         struct hisax_b_if *p_b_if[2];
1203
1204         /* check the chip id */
1205         if (read_usb(hfc, HFCUSB_CHIP_ID, &b) != 1) {
1206                 printk(KERN_INFO "HFC-USB: cannot read chip id\n");
1207                 return (1);
1208         }
1209         if (b != HFCUSB_CHIPID) {
1210                 printk(KERN_INFO "HFC-S USB: Invalid chip id 0x%02x\n", b);
1211                 return (1);
1212         }
1213
1214         /* first set the needed config, interface and alternate */
1215         err = usb_set_interface(hfc->dev, hfc->if_used, hfc->alt_used);
1216
1217         /* do Chip reset */
1218         write_usb(hfc, HFCUSB_CIRM, 8);
1219         /* aux = output, reset off */
1220         write_usb(hfc, HFCUSB_CIRM, 0x10);
1221
1222         /* set USB_SIZE to match the the wMaxPacketSize for INT or BULK transfers */
1223         write_usb(hfc, HFCUSB_USB_SIZE,
1224                   (hfc->packet_size / 8) | ((hfc->packet_size / 8) << 4));
1225
1226         /* set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers */
1227         write_usb(hfc, HFCUSB_USB_SIZE_I, hfc->iso_packet_size);
1228
1229         /* enable PCM/GCI master mode */
1230         write_usb(hfc, HFCUSB_MST_MODE1, 0);    /* set default values */
1231         write_usb(hfc, HFCUSB_MST_MODE0, 1);    /* enable master mode */
1232
1233         /* init the fifos */
1234         write_usb(hfc, HFCUSB_F_THRES,
1235                   (HFCUSB_TX_THRESHOLD /
1236                    8) | ((HFCUSB_RX_THRESHOLD / 8) << 4));
1237
1238         fifo = hfc->fifos;
1239         for (i = 0; i < HFCUSB_NUM_FIFOS; i++) {
1240                 write_usb(hfc, HFCUSB_FIFO, i); /* select the desired fifo */
1241                 fifo[i].skbuff = NULL;  /* init buffer pointer */
1242                 fifo[i].max_size =
1243                     (i <= HFCUSB_B2_RX) ? MAX_BCH_SIZE : MAX_DFRAME_LEN;
1244                 fifo[i].last_urblen = 0;
1245                 /* set 2 bit for D- & E-channel */
1246                 write_usb(hfc, HFCUSB_HDLC_PAR,
1247                           ((i <= HFCUSB_B2_RX) ? 0 : 2));
1248                 /* rx hdlc, enable IFF for D-channel */
1249                 write_usb(hfc, HFCUSB_CON_HDLC,
1250                           ((i == HFCUSB_D_TX) ? 0x09 : 0x08));
1251                 write_usb(hfc, HFCUSB_INC_RES_F, 2);    /* reset the fifo */
1252         }
1253
1254         write_usb(hfc, HFCUSB_CLKDEL, 0x0f);    /* clock delay value */
1255         write_usb(hfc, HFCUSB_STATES, 3 | 0x10);        /* set deactivated mode */
1256         write_usb(hfc, HFCUSB_STATES, 3);       /* enable state machine */
1257
1258         write_usb(hfc, HFCUSB_SCTRL_R, 0);      /* disable both B receivers */
1259         write_usb(hfc, HFCUSB_SCTRL, 0x40);     /* disable B transmitters + capacitive mode */
1260
1261         /* set both B-channel to not connected */
1262         hfc->b_mode[0] = L1_MODE_NULL;
1263         hfc->b_mode[1] = L1_MODE_NULL;
1264
1265         hfc->l1_activated = false;
1266         hfc->disc_flag = false;
1267         hfc->led_state = 0;
1268         hfc->led_new_data = 0;
1269         hfc->old_led_state = 0;
1270
1271         /* init the t3 timer */
1272         init_timer(&hfc->t3_timer);
1273         hfc->t3_timer.data = (long) hfc;
1274         hfc->t3_timer.function = (void *) l1_timer_expire_t3;
1275
1276         /* init the t4 timer */
1277         init_timer(&hfc->t4_timer);
1278         hfc->t4_timer.data = (long) hfc;
1279         hfc->t4_timer.function = (void *) l1_timer_expire_t4;
1280
1281         /* init the background machinery for control requests */
1282         hfc->ctrl_read.bRequestType = 0xc0;
1283         hfc->ctrl_read.bRequest = 1;
1284         hfc->ctrl_read.wLength = cpu_to_le16(1);
1285         hfc->ctrl_write.bRequestType = 0x40;
1286         hfc->ctrl_write.bRequest = 0;
1287         hfc->ctrl_write.wLength = 0;
1288         usb_fill_control_urb(hfc->ctrl_urb,
1289                              hfc->dev,
1290                              hfc->ctrl_out_pipe,
1291                              (u_char *) & hfc->ctrl_write,
1292                              NULL, 0, ctrl_complete, hfc);
1293         /* Init All Fifos */
1294         for (i = 0; i < HFCUSB_NUM_FIFOS; i++) {
1295                 hfc->fifos[i].iso[0].purb = NULL;
1296                 hfc->fifos[i].iso[1].purb = NULL;
1297                 hfc->fifos[i].active = 0;
1298         }
1299         /* register Modul to upper Hisax Layers */
1300         hfc->d_if.owner = THIS_MODULE;
1301         hfc->d_if.ifc.priv = &hfc->fifos[HFCUSB_D_TX];
1302         hfc->d_if.ifc.l2l1 = hfc_usb_l2l1;
1303         for (i = 0; i < 2; i++) {
1304                 hfc->b_if[i].ifc.priv = &hfc->fifos[HFCUSB_B1_TX + i * 2];
1305                 hfc->b_if[i].ifc.l2l1 = hfc_usb_l2l1;
1306                 p_b_if[i] = &hfc->b_if[i];
1307         }
1308         /* default Prot: EURO ISDN, should be a module_param */
1309         hfc->protocol = 2;
1310         hisax_register(&hfc->d_if, p_b_if, "hfc_usb", hfc->protocol);
1311
1312 #ifdef CONFIG_HISAX_DEBUG
1313         hfc_debug = debug;
1314 #endif
1315
1316         for (i = 0; i < 4; i++)
1317                 hfc->fifos[i].hif = &p_b_if[i / 2]->ifc;
1318         for (i = 4; i < 8; i++)
1319                 hfc->fifos[i].hif = &hfc->d_if.ifc;
1320
1321         /* 3 (+1) INT IN + 3 ISO OUT */
1322         if (hfc->cfg_used == CNF_3INT3ISO || hfc->cfg_used == CNF_4INT3ISO) {
1323                 start_int_fifo(hfc->fifos + HFCUSB_D_RX);
1324                 if (hfc->fifos[HFCUSB_PCM_RX].pipe)
1325                         start_int_fifo(hfc->fifos + HFCUSB_PCM_RX);
1326                 start_int_fifo(hfc->fifos + HFCUSB_B1_RX);
1327                 start_int_fifo(hfc->fifos + HFCUSB_B2_RX);
1328         }
1329         /* 3 (+1) ISO IN + 3 ISO OUT */
1330         if (hfc->cfg_used == CNF_3ISO3ISO || hfc->cfg_used == CNF_4ISO3ISO) {
1331                 start_isoc_chain(hfc->fifos + HFCUSB_D_RX, ISOC_PACKETS_D,
1332                                  rx_iso_complete, 16);
1333                 if (hfc->fifos[HFCUSB_PCM_RX].pipe)
1334                         start_isoc_chain(hfc->fifos + HFCUSB_PCM_RX,
1335                                          ISOC_PACKETS_D, rx_iso_complete,
1336                                          16);
1337                 start_isoc_chain(hfc->fifos + HFCUSB_B1_RX, ISOC_PACKETS_B,
1338                                  rx_iso_complete, 16);
1339                 start_isoc_chain(hfc->fifos + HFCUSB_B2_RX, ISOC_PACKETS_B,
1340                                  rx_iso_complete, 16);
1341         }
1342
1343         start_isoc_chain(hfc->fifos + HFCUSB_D_TX, ISOC_PACKETS_D,
1344                          tx_iso_complete, 1);
1345         start_isoc_chain(hfc->fifos + HFCUSB_B1_TX, ISOC_PACKETS_B,
1346                          tx_iso_complete, 1);
1347         start_isoc_chain(hfc->fifos + HFCUSB_B2_TX, ISOC_PACKETS_B,
1348                          tx_iso_complete, 1);
1349
1350         handle_led(hfc, LED_POWER_ON);
1351
1352         return (0);
1353 }                               /* usb_init */
1354
1355 /*************************************************/
1356 /* function called to probe a new plugged device */
1357 /*************************************************/
1358 static int
1359 hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
1360 {
1361         struct usb_device *dev = interface_to_usbdev(intf);
1362         hfcusb_data *context;
1363         struct usb_host_interface *iface = intf->cur_altsetting;
1364         struct usb_host_interface *iface_used = NULL;
1365         struct usb_host_endpoint *ep;
1366         int ifnum = iface->desc.bInterfaceNumber;
1367         int i, idx, alt_idx, probe_alt_setting, vend_idx, cfg_used, *vcf,
1368             attr, cfg_found, cidx, ep_addr;
1369         int cmptbl[16], small_match, iso_packet_size, packet_size,
1370             alt_used = 0;
1371         hfcsusb_vdata *driver_info;
1372
1373         vend_idx = 0xffff;
1374         for (i = 0; hfcusb_idtab[i].idVendor; i++) {
1375                 if ((le16_to_cpu(dev->descriptor.idVendor) == hfcusb_idtab[i].idVendor)
1376                     && (le16_to_cpu(dev->descriptor.idProduct) == hfcusb_idtab[i].idProduct)) {
1377                         vend_idx = i;
1378                         continue;
1379                 }
1380         }
1381
1382 #ifdef CONFIG_HISAX_DEBUG
1383         DBG(USB_DBG,
1384             "HFC-USB: probing interface(%d) actalt(%d) minor(%d)\n", ifnum,
1385             iface->desc.bAlternateSetting, intf->minor);
1386 #endif
1387         printk(KERN_INFO
1388                "HFC-S USB: probing interface(%d) actalt(%d) minor(%d)\n",
1389                ifnum, iface->desc.bAlternateSetting, intf->minor);
1390
1391         if (vend_idx != 0xffff) {
1392                 /* if vendor and product ID is OK, start probing alternate settings */
1393                 alt_idx = 0;
1394                 small_match = 0xffff;
1395
1396                 /* default settings */
1397                 iso_packet_size = 16;
1398                 packet_size = 64;
1399
1400                 while (alt_idx < intf->num_altsetting) {
1401                         iface = intf->altsetting + alt_idx;
1402                         probe_alt_setting = iface->desc.bAlternateSetting;
1403                         cfg_used = 0;
1404
1405                         /* check for config EOL element */
1406                         while (validconf[cfg_used][0]) {
1407                                 cfg_found = true;
1408                                 vcf = validconf[cfg_used];
1409                                 /* first endpoint descriptor */
1410                                 ep = iface->endpoint;
1411 #ifdef CONFIG_HISAX_DEBUG
1412                                 DBG(USB_DBG,
1413                                     "HFC-S USB: (if=%d alt=%d cfg_used=%d)\n",
1414                                     ifnum, probe_alt_setting, cfg_used);
1415 #endif
1416                                 memcpy(cmptbl, vcf, 16 * sizeof(int));
1417
1418                                 /* check for all endpoints in this alternate setting */
1419                                 for (i = 0; i < iface->desc.bNumEndpoints;
1420                                      i++) {
1421                                         ep_addr =
1422                                             ep->desc.bEndpointAddress;
1423                                         /* get endpoint base */
1424                                         idx = ((ep_addr & 0x7f) - 1) * 2;
1425                                         if (ep_addr & 0x80)
1426                                                 idx++;
1427                                         attr = ep->desc.bmAttributes;
1428                                         if (cmptbl[idx] == EP_NUL) {
1429                                                 cfg_found = false;
1430                                         }
1431                                         if (attr == USB_ENDPOINT_XFER_INT
1432                                             && cmptbl[idx] == EP_INT)
1433                                                 cmptbl[idx] = EP_NUL;
1434                                         if (attr == USB_ENDPOINT_XFER_BULK
1435                                             && cmptbl[idx] == EP_BLK)
1436                                                 cmptbl[idx] = EP_NUL;
1437                                         if (attr == USB_ENDPOINT_XFER_ISOC
1438                                             && cmptbl[idx] == EP_ISO)
1439                                                 cmptbl[idx] = EP_NUL;
1440
1441                                         /* check if all INT endpoints match minimum interval */
1442                                         if (attr == USB_ENDPOINT_XFER_INT
1443                                             && ep->desc.bInterval <
1444                                             vcf[17]) {
1445 #ifdef CONFIG_HISAX_DEBUG
1446                                                 if (cfg_found)
1447                                                         DBG(USB_DBG,
1448                                                             "HFC-S USB: Interrupt Endpoint interval < %d found - skipping config",
1449                                                             vcf[17]);
1450 #endif
1451                                                 cfg_found = false;
1452                                         }
1453                                         ep++;
1454                                 }
1455                                 for (i = 0; i < 16; i++) {
1456                                         /* all entries must be EP_NOP or EP_NUL for a valid config */
1457                                         if (cmptbl[i] != EP_NOP
1458                                             && cmptbl[i] != EP_NUL)
1459                                                 cfg_found = false;
1460                                 }
1461                                 if (cfg_found) {
1462                                         if (cfg_used < small_match) {
1463                                                 small_match = cfg_used;
1464                                                 alt_used =
1465                                                     probe_alt_setting;
1466                                                 iface_used = iface;
1467                                         }
1468 #ifdef CONFIG_HISAX_DEBUG
1469                                         DBG(USB_DBG,
1470                                             "HFC-USB: small_match=%x %x\n",
1471                                             small_match, alt_used);
1472 #endif
1473                                 }
1474                                 cfg_used++;
1475                         }
1476                         alt_idx++;
1477                 }               /* (alt_idx < intf->num_altsetting) */
1478
1479                 /* found a valid USB Ta Endpint config */
1480                 if (small_match != 0xffff) {
1481                         iface = iface_used;
1482                         if (!
1483                             (context =
1484                              kzalloc(sizeof(hfcusb_data), GFP_KERNEL)))
1485                                 return (-ENOMEM);       /* got no mem */
1486
1487                         ep = iface->endpoint;
1488                         vcf = validconf[small_match];
1489
1490                         for (i = 0; i < iface->desc.bNumEndpoints; i++) {
1491                                 ep_addr = ep->desc.bEndpointAddress;
1492                                 /* get endpoint base */
1493                                 idx = ((ep_addr & 0x7f) - 1) * 2;
1494                                 if (ep_addr & 0x80)
1495                                         idx++;
1496                                 cidx = idx & 7;
1497                                 attr = ep->desc.bmAttributes;
1498
1499                                 /* init Endpoints */
1500                                 if (vcf[idx] != EP_NOP
1501                                     && vcf[idx] != EP_NUL) {
1502                                         switch (attr) {
1503                                                 case USB_ENDPOINT_XFER_INT:
1504                                                         context->
1505                                                             fifos[cidx].
1506                                                             pipe =
1507                                                             usb_rcvintpipe
1508                                                             (dev,
1509                                                              ep->desc.
1510                                                              bEndpointAddress);
1511                                                         context->
1512                                                             fifos[cidx].
1513                                                             usb_transfer_mode
1514                                                             = USB_INT;
1515                                                         packet_size =
1516                                                             le16_to_cpu(ep->desc.wMaxPacketSize);
1517                                                         break;
1518                                                 case USB_ENDPOINT_XFER_BULK:
1519                                                         if (ep_addr & 0x80)
1520                                                                 context->
1521                                                                     fifos
1522                                                                     [cidx].
1523                                                                     pipe =
1524                                                                     usb_rcvbulkpipe
1525                                                                     (dev,
1526                                                                      ep->
1527                                                                      desc.
1528                                                                      bEndpointAddress);
1529                                                         else
1530                                                                 context->
1531                                                                     fifos
1532                                                                     [cidx].
1533                                                                     pipe =
1534                                                                     usb_sndbulkpipe
1535                                                                     (dev,
1536                                                                      ep->
1537                                                                      desc.
1538                                                                      bEndpointAddress);
1539                                                         context->
1540                                                             fifos[cidx].
1541                                                             usb_transfer_mode
1542                                                             = USB_BULK;
1543                                                         packet_size =
1544                                                             le16_to_cpu(ep->desc.wMaxPacketSize);
1545                                                         break;
1546                                                 case USB_ENDPOINT_XFER_ISOC:
1547                                                         if (ep_addr & 0x80)
1548                                                                 context->
1549                                                                     fifos
1550                                                                     [cidx].
1551                                                                     pipe =
1552                                                                     usb_rcvisocpipe
1553                                                                     (dev,
1554                                                                      ep->
1555                                                                      desc.
1556                                                                      bEndpointAddress);
1557                                                         else
1558                                                                 context->
1559                                                                     fifos
1560                                                                     [cidx].
1561                                                                     pipe =
1562                                                                     usb_sndisocpipe
1563                                                                     (dev,
1564                                                                      ep->
1565                                                                      desc.
1566                                                                      bEndpointAddress);
1567                                                         context->
1568                                                             fifos[cidx].
1569                                                             usb_transfer_mode
1570                                                             = USB_ISOC;
1571                                                         iso_packet_size =
1572                                                             le16_to_cpu(ep->desc.wMaxPacketSize);
1573                                                         break;
1574                                                 default:
1575                                                         context->
1576                                                             fifos[cidx].
1577                                                             pipe = 0;
1578                                         }       /* switch attribute */
1579
1580                                         if (context->fifos[cidx].pipe) {
1581                                                 context->fifos[cidx].
1582                                                     fifonum = cidx;
1583                                                 context->fifos[cidx].hfc =
1584                                                     context;
1585                                                 context->fifos[cidx].usb_packet_maxlen =
1586                                                     le16_to_cpu(ep->desc.wMaxPacketSize);
1587                                                 context->fifos[cidx].
1588                                                     intervall =
1589                                                     ep->desc.bInterval;
1590                                                 context->fifos[cidx].
1591                                                     skbuff = NULL;
1592                                         }
1593                                 }
1594                                 ep++;
1595                         }
1596                         context->dev = dev;     /* save device */
1597                         context->if_used = ifnum;       /* save used interface */
1598                         context->alt_used = alt_used;   /* and alternate config */
1599                         context->ctrl_paksize = dev->descriptor.bMaxPacketSize0;        /* control size */
1600                         context->cfg_used = vcf[16];    /* store used config */
1601                         context->vend_idx = vend_idx;   /* store found vendor */
1602                         context->packet_size = packet_size;
1603                         context->iso_packet_size = iso_packet_size;
1604
1605                         /* create the control pipes needed for register access */
1606                         context->ctrl_in_pipe =
1607                             usb_rcvctrlpipe(context->dev, 0);
1608                         context->ctrl_out_pipe =
1609                             usb_sndctrlpipe(context->dev, 0);
1610                         context->ctrl_urb = usb_alloc_urb(0, GFP_KERNEL);
1611
1612                         driver_info =
1613                             (hfcsusb_vdata *) hfcusb_idtab[vend_idx].
1614                             driver_info;
1615                         printk(KERN_INFO "HFC-S USB: detected \"%s\"\n",
1616                                driver_info->vend_name);
1617 #ifdef CONFIG_HISAX_DEBUG
1618                         DBG(USB_DBG,
1619                             "HFC-S USB: Endpoint-Config: %s (if=%d alt=%d)\n",
1620                             conf_str[small_match], context->if_used,
1621                             context->alt_used);
1622                         printk(KERN_INFO
1623                                "HFC-S USB: E-channel (\"ECHO:\") logging ");
1624                         if (validconf[small_match][18])
1625                                 printk(" possible\n");
1626                         else
1627                                 printk("NOT possible\n");
1628 #endif
1629                         /* init the chip and register the driver */
1630                         if (usb_init(context)) {
1631                                 if (context->ctrl_urb) {
1632                                         usb_unlink_urb(context->ctrl_urb);
1633                                         usb_free_urb(context->ctrl_urb);
1634                                         context->ctrl_urb = NULL;
1635                                 }
1636                                 kfree(context);
1637                                 return (-EIO);
1638                         }
1639                         usb_set_intfdata(intf, context);
1640                         return (0);
1641                 }
1642         } else {
1643                 printk(KERN_INFO
1644                        "HFC-S USB: no valid vendor found in USB descriptor\n");
1645         }
1646         return (-EIO);
1647 }
1648
1649 /****************************************************/
1650 /* function called when an active device is removed */
1651 /****************************************************/
1652 static void
1653 hfc_usb_disconnect(struct usb_interface
1654                    *intf)
1655 {
1656         hfcusb_data *context = usb_get_intfdata(intf);
1657         int i;
1658         printk(KERN_INFO "HFC-S USB: device disconnect\n");
1659         context->disc_flag = true;
1660         usb_set_intfdata(intf, NULL);
1661         if (!context)
1662                 return;
1663         if (timer_pending(&context->t3_timer))
1664                 del_timer(&context->t3_timer);
1665         if (timer_pending(&context->t4_timer))
1666                 del_timer(&context->t4_timer);
1667         /* tell all fifos to terminate */
1668         for (i = 0; i < HFCUSB_NUM_FIFOS; i++) {
1669                 if (context->fifos[i].usb_transfer_mode == USB_ISOC) {
1670                         if (context->fifos[i].active > 0) {
1671                                 stop_isoc_chain(&context->fifos[i]);
1672 #ifdef CONFIG_HISAX_DEBUG
1673                                 DBG(USB_DBG,
1674                                     "HFC-S USB: hfc_usb_disconnect: stopping ISOC chain Fifo no %i",
1675                                     i);
1676 #endif
1677                         }
1678                 } else {
1679                         if (context->fifos[i].active > 0) {
1680                                 context->fifos[i].active = 0;
1681 #ifdef CONFIG_HISAX_DEBUG
1682                                 DBG(USB_DBG,
1683                                     "HFC-S USB: hfc_usb_disconnect: unlinking URB for Fifo no %i",
1684                                     i);
1685 #endif
1686                         }
1687                         if (context->fifos[i].urb) {
1688                                 usb_unlink_urb(context->fifos[i].urb);
1689                                 usb_free_urb(context->fifos[i].urb);
1690                                 context->fifos[i].urb = NULL;
1691                         }
1692                 }
1693                 context->fifos[i].active = 0;
1694         }
1695         /* wait for all URBS to terminate */
1696         mdelay(10);
1697         if (context->ctrl_urb) {
1698                 usb_unlink_urb(context->ctrl_urb);
1699                 usb_free_urb(context->ctrl_urb);
1700                 context->ctrl_urb = NULL;
1701         }
1702         hisax_unregister(&context->d_if);
1703         kfree(context);         /* free our structure again */
1704 }                               /* hfc_usb_disconnect */
1705
1706 /************************************/
1707 /* our driver information structure */
1708 /************************************/
1709 static struct usb_driver hfc_drv = {
1710         .name  = "hfc_usb",
1711         .id_table = hfcusb_idtab,
1712         .probe = hfc_usb_probe,
1713         .disconnect = hfc_usb_disconnect,
1714 };
1715 static void __exit
1716 hfc_usb_exit(void)
1717 {
1718 #ifdef CONFIG_HISAX_DEBUG
1719         DBG(USB_DBG, "HFC-S USB: calling \"hfc_usb_exit\" ...");
1720 #endif
1721         usb_deregister(&hfc_drv);       /* release our driver */
1722         printk(KERN_INFO "HFC-S USB: module removed\n");
1723 }
1724
1725 static int __init
1726 hfc_usb_init(void)
1727 {
1728 #ifndef CONFIG_HISAX_DEBUG
1729         unsigned int debug = -1;
1730 #endif
1731         char revstr[30], datestr[30], dummy[30];
1732         sscanf(hfcusb_revision,
1733                "%s %s $ %s %s %s $ ", dummy, revstr,
1734                dummy, datestr, dummy);
1735         printk(KERN_INFO
1736                "HFC-S USB: driver module revision %s date %s loaded, (debug=%i)\n",
1737                revstr, datestr, debug);
1738         if (usb_register(&hfc_drv)) {
1739                 printk(KERN_INFO
1740                        "HFC-S USB: Unable to register HFC-S USB module at usb stack\n");
1741                 return (-1);    /* unable to register */
1742         }
1743         return (0);
1744 }
1745
1746 module_init(hfc_usb_init);
1747 module_exit(hfc_usb_exit);
1748 MODULE_AUTHOR(DRIVER_AUTHOR);
1749 MODULE_DESCRIPTION(DRIVER_DESC);
1750 MODULE_LICENSE("GPL");
1751 MODULE_DEVICE_TABLE(usb, hfcusb_idtab);