genirq: Remove irq argument from irq flow handlers
[linux-drm-fsl-dcu.git] / drivers / gpio / gpio-msm-v2.c
1 /* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
2  *
3  * This program is free software; you can redistribute it and/or modify
4  * it under the terms of the GNU General Public License version 2 and
5  * only version 2 as published by the Free Software Foundation.
6  *
7  * This program is distributed in the hope that it will be useful,
8  * but WITHOUT ANY WARRANTY; without even the implied warranty of
9  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
10  * GNU General Public License for more details.
11  *
12  * You should have received a copy of the GNU General Public License
13  * along with this program; if not, write to the Free Software
14  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
15  * 02110-1301, USA.
16  *
17  */
18 #define pr_fmt(fmt) "%s: " fmt, __func__
19
20 #include <linux/bitmap.h>
21 #include <linux/bitops.h>
22 #include <linux/err.h>
23 #include <linux/gpio.h>
24 #include <linux/init.h>
25 #include <linux/interrupt.h>
26 #include <linux/io.h>
27 #include <linux/irqchip/chained_irq.h>
28 #include <linux/irq.h>
29 #include <linux/irqdomain.h>
30 #include <linux/module.h>
31 #include <linux/of_address.h>
32 #include <linux/platform_device.h>
33 #include <linux/spinlock.h>
34 #include <linux/slab.h>
35
36 #define MAX_NR_GPIO 300
37
38 /* Bits of interest in the GPIO_IN_OUT register.
39  */
40 enum {
41         GPIO_IN  = 0,
42         GPIO_OUT = 1
43 };
44
45 /* Bits of interest in the GPIO_INTR_STATUS register.
46  */
47 enum {
48         INTR_STATUS = 0,
49 };
50
51 /* Bits of interest in the GPIO_CFG register.
52  */
53 enum {
54         GPIO_OE = 9,
55 };
56
57 /* Bits of interest in the GPIO_INTR_CFG register.
58  * When a GPIO triggers, two separate decisions are made, controlled
59  * by two separate flags.
60  *
61  * - First, INTR_RAW_STATUS_EN controls whether or not the GPIO_INTR_STATUS
62  * register for that GPIO will be updated to reflect the triggering of that
63  * gpio.  If this bit is 0, this register will not be updated.
64  * - Second, INTR_ENABLE controls whether an interrupt is triggered.
65  *
66  * If INTR_ENABLE is set and INTR_RAW_STATUS_EN is NOT set, an interrupt
67  * can be triggered but the status register will not reflect it.
68  */
69 enum {
70         INTR_ENABLE        = 0,
71         INTR_POL_CTL       = 1,
72         INTR_DECT_CTL      = 2,
73         INTR_RAW_STATUS_EN = 3,
74 };
75
76 /* Codes of interest in GPIO_INTR_CFG_SU.
77  */
78 enum {
79         TARGET_PROC_SCORPION = 4,
80         TARGET_PROC_NONE     = 7,
81 };
82
83 /**
84  * struct msm_gpio_dev: the MSM8660 SoC GPIO device structure
85  *
86  * @enabled_irqs: a bitmap used to optimize the summary-irq handler.  By
87  * keeping track of which gpios are unmasked as irq sources, we avoid
88  * having to do readl calls on hundreds of iomapped registers each time
89  * the summary interrupt fires in order to locate the active interrupts.
90  *
91  * @wake_irqs: a bitmap for tracking which interrupt lines are enabled
92  * as wakeup sources.  When the device is suspended, interrupts which are
93  * not wakeup sources are disabled.
94  *
95  * @dual_edge_irqs: a bitmap used to track which irqs are configured
96  * as dual-edge, as this is not supported by the hardware and requires
97  * some special handling in the driver.
98  */
99 struct msm_gpio_dev {
100         struct gpio_chip gpio_chip;
101         DECLARE_BITMAP(enabled_irqs, MAX_NR_GPIO);
102         DECLARE_BITMAP(wake_irqs, MAX_NR_GPIO);
103         DECLARE_BITMAP(dual_edge_irqs, MAX_NR_GPIO);
104         struct irq_domain *domain;
105         int summary_irq;
106         void __iomem *msm_tlmm_base;
107 };
108
109 static struct msm_gpio_dev msm_gpio;
110
111 #define GPIO_INTR_CFG_SU(gpio)    (msm_gpio.msm_tlmm_base + 0x0400 + \
112                                                                 (0x04 * (gpio)))
113 #define GPIO_CONFIG(gpio)         (msm_gpio.msm_tlmm_base + 0x1000 + \
114                                                                 (0x10 * (gpio)))
115 #define GPIO_IN_OUT(gpio)         (msm_gpio.msm_tlmm_base + 0x1004 + \
116                                                                 (0x10 * (gpio)))
117 #define GPIO_INTR_CFG(gpio)       (msm_gpio.msm_tlmm_base + 0x1008 + \
118                                                                 (0x10 * (gpio)))
119 #define GPIO_INTR_STATUS(gpio)    (msm_gpio.msm_tlmm_base + 0x100c + \
120                                                                 (0x10 * (gpio)))
121
122 static DEFINE_SPINLOCK(tlmm_lock);
123
124 static inline struct msm_gpio_dev *to_msm_gpio_dev(struct gpio_chip *chip)
125 {
126         return container_of(chip, struct msm_gpio_dev, gpio_chip);
127 }
128
129 static inline void set_gpio_bits(unsigned n, void __iomem *reg)
130 {
131         writel(readl(reg) | n, reg);
132 }
133
134 static inline void clear_gpio_bits(unsigned n, void __iomem *reg)
135 {
136         writel(readl(reg) & ~n, reg);
137 }
138
139 static int msm_gpio_get(struct gpio_chip *chip, unsigned offset)
140 {
141         return readl(GPIO_IN_OUT(offset)) & BIT(GPIO_IN);
142 }
143
144 static void msm_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
145 {
146         writel(val ? BIT(GPIO_OUT) : 0, GPIO_IN_OUT(offset));
147 }
148
149 static int msm_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
150 {
151         unsigned long irq_flags;
152
153         spin_lock_irqsave(&tlmm_lock, irq_flags);
154         clear_gpio_bits(BIT(GPIO_OE), GPIO_CONFIG(offset));
155         spin_unlock_irqrestore(&tlmm_lock, irq_flags);
156         return 0;
157 }
158
159 static int msm_gpio_direction_output(struct gpio_chip *chip,
160                                 unsigned offset,
161                                 int val)
162 {
163         unsigned long irq_flags;
164
165         spin_lock_irqsave(&tlmm_lock, irq_flags);
166         msm_gpio_set(chip, offset, val);
167         set_gpio_bits(BIT(GPIO_OE), GPIO_CONFIG(offset));
168         spin_unlock_irqrestore(&tlmm_lock, irq_flags);
169         return 0;
170 }
171
172 static int msm_gpio_request(struct gpio_chip *chip, unsigned offset)
173 {
174         return 0;
175 }
176
177 static void msm_gpio_free(struct gpio_chip *chip, unsigned offset)
178 {
179         return;
180 }
181
182 static int msm_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
183 {
184         struct msm_gpio_dev *g_dev = to_msm_gpio_dev(chip);
185         struct irq_domain *domain = g_dev->domain;
186
187         return irq_create_mapping(domain, offset);
188 }
189
190 /* For dual-edge interrupts in software, since the hardware has no
191  * such support:
192  *
193  * At appropriate moments, this function may be called to flip the polarity
194  * settings of both-edge irq lines to try and catch the next edge.
195  *
196  * The attempt is considered successful if:
197  * - the status bit goes high, indicating that an edge was caught, or
198  * - the input value of the gpio doesn't change during the attempt.
199  * If the value changes twice during the process, that would cause the first
200  * test to fail but would force the second, as two opposite
201  * transitions would cause a detection no matter the polarity setting.
202  *
203  * The do-loop tries to sledge-hammer closed the timing hole between
204  * the initial value-read and the polarity-write - if the line value changes
205  * during that window, an interrupt is lost, the new polarity setting is
206  * incorrect, and the first success test will fail, causing a retry.
207  *
208  * Algorithm comes from Google's msmgpio driver, see mach-msm/gpio.c.
209  */
210 static void msm_gpio_update_dual_edge_pos(unsigned gpio)
211 {
212         int loop_limit = 100;
213         unsigned val, val2, intstat;
214
215         do {
216                 val = readl(GPIO_IN_OUT(gpio)) & BIT(GPIO_IN);
217                 if (val)
218                         clear_gpio_bits(BIT(INTR_POL_CTL), GPIO_INTR_CFG(gpio));
219                 else
220                         set_gpio_bits(BIT(INTR_POL_CTL), GPIO_INTR_CFG(gpio));
221                 val2 = readl(GPIO_IN_OUT(gpio)) & BIT(GPIO_IN);
222                 intstat = readl(GPIO_INTR_STATUS(gpio)) & BIT(INTR_STATUS);
223                 if (intstat || val == val2)
224                         return;
225         } while (loop_limit-- > 0);
226         pr_err("%s: dual-edge irq failed to stabilize, "
227                "interrupts dropped. %#08x != %#08x\n",
228                __func__, val, val2);
229 }
230
231 static void msm_gpio_irq_ack(struct irq_data *d)
232 {
233         int gpio = d->hwirq;
234
235         writel(BIT(INTR_STATUS), GPIO_INTR_STATUS(gpio));
236         if (test_bit(gpio, msm_gpio.dual_edge_irqs))
237                 msm_gpio_update_dual_edge_pos(gpio);
238 }
239
240 static void msm_gpio_irq_mask(struct irq_data *d)
241 {
242         unsigned long irq_flags;
243         int gpio = d->hwirq;
244
245         spin_lock_irqsave(&tlmm_lock, irq_flags);
246         writel(TARGET_PROC_NONE, GPIO_INTR_CFG_SU(gpio));
247         clear_gpio_bits(BIT(INTR_RAW_STATUS_EN) | BIT(INTR_ENABLE), GPIO_INTR_CFG(gpio));
248         __clear_bit(gpio, msm_gpio.enabled_irqs);
249         spin_unlock_irqrestore(&tlmm_lock, irq_flags);
250 }
251
252 static void msm_gpio_irq_unmask(struct irq_data *d)
253 {
254         unsigned long irq_flags;
255         int gpio = d->hwirq;
256
257         spin_lock_irqsave(&tlmm_lock, irq_flags);
258         __set_bit(gpio, msm_gpio.enabled_irqs);
259         set_gpio_bits(BIT(INTR_RAW_STATUS_EN) | BIT(INTR_ENABLE), GPIO_INTR_CFG(gpio));
260         writel(TARGET_PROC_SCORPION, GPIO_INTR_CFG_SU(gpio));
261         spin_unlock_irqrestore(&tlmm_lock, irq_flags);
262 }
263
264 static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int flow_type)
265 {
266         unsigned long irq_flags;
267         int gpio = d->hwirq;
268         uint32_t bits;
269
270         spin_lock_irqsave(&tlmm_lock, irq_flags);
271
272         bits = readl(GPIO_INTR_CFG(gpio));
273
274         if (flow_type & IRQ_TYPE_EDGE_BOTH) {
275                 bits |= BIT(INTR_DECT_CTL);
276                 irq_set_handler_locked(d, handle_edge_irq);
277                 if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH)
278                         __set_bit(gpio, msm_gpio.dual_edge_irqs);
279                 else
280                         __clear_bit(gpio, msm_gpio.dual_edge_irqs);
281         } else {
282                 bits &= ~BIT(INTR_DECT_CTL);
283                 irq_set_handler_locked(d, handle_level_irq);
284                 __clear_bit(gpio, msm_gpio.dual_edge_irqs);
285         }
286
287         if (flow_type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_HIGH))
288                 bits |= BIT(INTR_POL_CTL);
289         else
290                 bits &= ~BIT(INTR_POL_CTL);
291
292         writel(bits, GPIO_INTR_CFG(gpio));
293
294         if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH)
295                 msm_gpio_update_dual_edge_pos(gpio);
296
297         spin_unlock_irqrestore(&tlmm_lock, irq_flags);
298
299         return 0;
300 }
301
302 /*
303  * When the summary IRQ is raised, any number of GPIO lines may be high.
304  * It is the job of the summary handler to find all those GPIO lines
305  * which have been set as summary IRQ lines and which are triggered,
306  * and to call their interrupt handlers.
307  */
308 static void msm_summary_irq_handler(struct irq_desc *desc)
309 {
310         unsigned long i;
311         struct irq_chip *chip = irq_desc_get_chip(desc);
312
313         chained_irq_enter(chip, desc);
314
315         for_each_set_bit(i, msm_gpio.enabled_irqs, MAX_NR_GPIO) {
316                 if (readl(GPIO_INTR_STATUS(i)) & BIT(INTR_STATUS))
317                         generic_handle_irq(irq_find_mapping(msm_gpio.domain,
318                                                                 i));
319         }
320
321         chained_irq_exit(chip, desc);
322 }
323
324 static int msm_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
325 {
326         int gpio = d->hwirq;
327
328         if (on) {
329                 if (bitmap_empty(msm_gpio.wake_irqs, MAX_NR_GPIO))
330                         irq_set_irq_wake(msm_gpio.summary_irq, 1);
331                 set_bit(gpio, msm_gpio.wake_irqs);
332         } else {
333                 clear_bit(gpio, msm_gpio.wake_irqs);
334                 if (bitmap_empty(msm_gpio.wake_irqs, MAX_NR_GPIO))
335                         irq_set_irq_wake(msm_gpio.summary_irq, 0);
336         }
337
338         return 0;
339 }
340
341 static struct irq_chip msm_gpio_irq_chip = {
342         .name           = "msmgpio",
343         .irq_mask       = msm_gpio_irq_mask,
344         .irq_unmask     = msm_gpio_irq_unmask,
345         .irq_ack        = msm_gpio_irq_ack,
346         .irq_set_type   = msm_gpio_irq_set_type,
347         .irq_set_wake   = msm_gpio_irq_set_wake,
348 };
349
350 static struct lock_class_key msm_gpio_lock_class;
351
352 static int msm_gpio_irq_domain_map(struct irq_domain *d, unsigned int irq,
353                                    irq_hw_number_t hwirq)
354 {
355         irq_set_lockdep_class(irq, &msm_gpio_lock_class);
356         irq_set_chip_and_handler(irq, &msm_gpio_irq_chip,
357                         handle_level_irq);
358
359         return 0;
360 }
361
362 static const struct irq_domain_ops msm_gpio_irq_domain_ops = {
363         .xlate = irq_domain_xlate_twocell,
364         .map = msm_gpio_irq_domain_map,
365 };
366
367 static int msm_gpio_probe(struct platform_device *pdev)
368 {
369         int ret, ngpio;
370         struct resource *res;
371
372         if (of_property_read_u32(pdev->dev.of_node, "ngpio", &ngpio)) {
373                 dev_err(&pdev->dev, "%s: ngpio property missing\n", __func__);
374                 return -EINVAL;
375         }
376
377         if (ngpio > MAX_NR_GPIO)
378                 WARN(1, "ngpio exceeds the MAX_NR_GPIO. Increase MAX_NR_GPIO\n");
379
380         bitmap_zero(msm_gpio.enabled_irqs, MAX_NR_GPIO);
381         bitmap_zero(msm_gpio.wake_irqs, MAX_NR_GPIO);
382         bitmap_zero(msm_gpio.dual_edge_irqs, MAX_NR_GPIO);
383
384         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
385         msm_gpio.msm_tlmm_base = devm_ioremap_resource(&pdev->dev, res);
386         if (IS_ERR(msm_gpio.msm_tlmm_base))
387                 return PTR_ERR(msm_gpio.msm_tlmm_base);
388
389         msm_gpio.gpio_chip.ngpio = ngpio;
390         msm_gpio.gpio_chip.label = pdev->name;
391         msm_gpio.gpio_chip.dev = &pdev->dev;
392         msm_gpio.gpio_chip.base = 0;
393         msm_gpio.gpio_chip.direction_input = msm_gpio_direction_input;
394         msm_gpio.gpio_chip.direction_output = msm_gpio_direction_output;
395         msm_gpio.gpio_chip.get = msm_gpio_get;
396         msm_gpio.gpio_chip.set = msm_gpio_set;
397         msm_gpio.gpio_chip.to_irq = msm_gpio_to_irq;
398         msm_gpio.gpio_chip.request = msm_gpio_request;
399         msm_gpio.gpio_chip.free = msm_gpio_free;
400
401         ret = gpiochip_add(&msm_gpio.gpio_chip);
402         if (ret < 0) {
403                 dev_err(&pdev->dev, "gpiochip_add failed with error %d\n", ret);
404                 return ret;
405         }
406
407         msm_gpio.summary_irq = platform_get_irq(pdev, 0);
408         if (msm_gpio.summary_irq < 0) {
409                 dev_err(&pdev->dev, "No Summary irq defined for msmgpio\n");
410                 return msm_gpio.summary_irq;
411         }
412
413         msm_gpio.domain = irq_domain_add_linear(pdev->dev.of_node, ngpio,
414                                                 &msm_gpio_irq_domain_ops,
415                                                 &msm_gpio);
416         if (!msm_gpio.domain)
417                 return -ENODEV;
418
419         irq_set_chained_handler(msm_gpio.summary_irq, msm_summary_irq_handler);
420
421         return 0;
422 }
423
424 static const struct of_device_id msm_gpio_of_match[] = {
425         { .compatible = "qcom,msm-gpio", },
426         { },
427 };
428 MODULE_DEVICE_TABLE(of, msm_gpio_of_match);
429
430 static int msm_gpio_remove(struct platform_device *dev)
431 {
432         gpiochip_remove(&msm_gpio.gpio_chip);
433
434         irq_set_handler(msm_gpio.summary_irq, NULL);
435
436         return 0;
437 }
438
439 static struct platform_driver msm_gpio_driver = {
440         .probe = msm_gpio_probe,
441         .remove = msm_gpio_remove,
442         .driver = {
443                 .name = "msmgpio",
444                 .of_match_table = msm_gpio_of_match,
445         },
446 };
447
448 module_platform_driver(msm_gpio_driver)
449
450 MODULE_AUTHOR("Gregory Bean <gbean@codeaurora.org>");
451 MODULE_DESCRIPTION("Driver for Qualcomm MSM TLMMv2 SoC GPIOs");
452 MODULE_LICENSE("GPL v2");
453 MODULE_ALIAS("platform:msmgpio");