drivers/cpufreq/speedstep-smi.c

   1 /*
   2  * Intel SpeedStep SMI driver.
   3  *
   4  * (C) 2003  Hiroshi Miura <miura@da-cha.org>
   5  *
   6  *  Licensed under the terms of the GNU GPL License version 2.
   7  *
   8  */
   9
  10
  11 /*********************************************************************
  12  *                        SPEEDSTEP - DEFINITIONS                    *
  13  *********************************************************************/
  14
  15 #include <linux/kernel.h>
  16 #include <linux/module.h>
  17 #include <linux/moduleparam.h>
  18 #include <linux/init.h>
  19 #include <linux/cpufreq.h>
  20 #include <linux/delay.h>
  21 #include <linux/io.h>
  22 #include <asm/ist.h>
  23 #include <asm/cpu_device_id.h>
  24
  25 #include "speedstep-lib.h"
  26
  27 /* speedstep system management interface port/command.
  28  *
  29  * These parameters are got from IST-SMI BIOS call.
  30  * If user gives it, these are used.
  31  *
  32  */
  33 static int smi_port;
  34 static int smi_cmd;
  35 static unsigned int smi_sig;
  36
  37 /* info about the processor */
  38 static enum speedstep_processor speedstep_processor;
  39
  40 /*
  41  * There are only two frequency states for each processor. Values
  42  * are in kHz for the time being.
  43  */
  44 static struct cpufreq_frequency_table speedstep_freqs[] = {
  45         {0, SPEEDSTEP_HIGH,     0},
  46         {0, SPEEDSTEP_LOW,      0},
  47         {0, 0,                  CPUFREQ_TABLE_END},
  48 };
  49
  50 #define GET_SPEEDSTEP_OWNER 0
  51 #define GET_SPEEDSTEP_STATE 1
  52 #define SET_SPEEDSTEP_STATE 2
  53 #define GET_SPEEDSTEP_FREQS 4
  54
  55 /* how often shall the SMI call be tried if it failed, e.g. because
  56  * of DMA activity going on? */
  57 #define SMI_TRIES 5
  58
  59 /**
  60  * speedstep_smi_ownership
  61  */
  62 static int speedstep_smi_ownership(void)
  63 {
  64         u32 command, result, magic, dummy;
  65         u32 function = GET_SPEEDSTEP_OWNER;
  66         unsigned char magic_data[] = "Copyright (c) 1999 Intel Corporation";
  67
  68         command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
  69         magic = virt_to_phys(magic_data);
  70
  71         pr_debug("trying to obtain ownership with command %x at port %x\n",
  72                         command, smi_port);
  73
  74         __asm__ __volatile__(
  75                 "push %%ebp\n"
  76                 "out %%al, (%%dx)\n"
  77                 "pop %%ebp\n"
  78                 : "=D" (result),
  79                   "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy),
  80                   "=S" (dummy)
  81                 : "a" (command), "b" (function), "c" (0), "d" (smi_port),
  82                   "D" (0), "S" (magic)
  83                 : "memory"
  84         );
  85
  86         pr_debug("result is %x\n", result);
  87
  88         return result;
  89 }
  90
  91 /**
  92  * speedstep_smi_get_freqs - get SpeedStep preferred & current freq.
  93  * @low: the low frequency value is placed here
  94  * @high: the high frequency value is placed here
  95  *
  96  * Only available on later SpeedStep-enabled systems, returns false results or
  97  * even hangs [cf. bugme.osdl.org # 1422] on earlier systems. Empirical testing
  98  * shows that the latter occurs if !(ist_info.event & 0xFFFF).
  99  */
 100 static int speedstep_smi_get_freqs(unsigned int *low, unsigned int *high)
 101 {
 102         u32 command, result = 0, edi, high_mhz, low_mhz, dummy;
 103         u32 state = 0;
 104         u32 function = GET_SPEEDSTEP_FREQS;
 105
 106         if (!(ist_info.event & 0xFFFF)) {
 107                 pr_debug("bug #1422 -- can't read freqs from BIOS\n");
 108                 return -ENODEV;
 109         }
 110
 111         command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
 112
 113         pr_debug("trying to determine frequencies with command %x at port %x\n",
 114                         command, smi_port);
 115
 116         __asm__ __volatile__(
 117                 "push %%ebp\n"
 118                 "out %%al, (%%dx)\n"
 119                 "pop %%ebp"
 120                 : "=a" (result),
 121                   "=b" (high_mhz),
 122                   "=c" (low_mhz),
 123                   "=d" (state), "=D" (edi), "=S" (dummy)
 124                 : "a" (command),
 125                   "b" (function),
 126                   "c" (state),
 127                   "d" (smi_port), "S" (0), "D" (0)
 128         );
 129
 130         pr_debug("result %x, low_freq %u, high_freq %u\n",
 131                         result, low_mhz, high_mhz);
 132
 133         /* abort if results are obviously incorrect... */
 134         if ((high_mhz + low_mhz) < 600)
 135                 return -EINVAL;
 136
 137         *high = high_mhz * 1000;
 138         *low  = low_mhz  * 1000;
 139
 140         return result;
 141 }
 142
 143 /**
 144  * speedstep_set_state - set the SpeedStep state
 145  * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
 146  *
 147  */
 148 static void speedstep_set_state(unsigned int state)
 149 {
 150         unsigned int result = 0, command, new_state, dummy;
 151         unsigned long flags;
 152         unsigned int function = SET_SPEEDSTEP_STATE;
 153         unsigned int retry = 0;
 154
 155         if (state > 0x1)
 156                 return;
 157
 158         /* Disable IRQs */
 159         local_irq_save(flags);
 160
 161         command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
 162
 163         pr_debug("trying to set frequency to state %u "
 164                 "with command %x at port %x\n",
 165                 state, command, smi_port);
 166
 167         do {
 168                 if (retry) {
 169                         pr_debug("retry %u, previous result %u, waiting...\n",
 170                                         retry, result);
 171                         mdelay(retry * 50);
 172                 }
 173                 retry++;
 174                 __asm__ __volatile__(
 175                         "push %%ebp\n"
 176                         "out %%al, (%%dx)\n"
 177                         "pop %%ebp"
 178                         : "=b" (new_state), "=D" (result),
 179                           "=c" (dummy), "=a" (dummy),
 180                           "=d" (dummy), "=S" (dummy)
 181                         : "a" (command), "b" (function), "c" (state),
 182                           "d" (smi_port), "S" (0), "D" (0)
 183                         );
 184         } while ((new_state != state) && (retry <= SMI_TRIES));
 185
 186         /* enable IRQs */
 187         local_irq_restore(flags);
 188
 189         if (new_state == state)
 190                 pr_debug("change to %u MHz succeeded after %u tries "
 191                         "with result %u\n",
 192                         (speedstep_freqs[new_state].frequency / 1000),
 193                         retry, result);
 194         else
 195                 printk(KERN_ERR "cpufreq: change to state %u "
 196                         "failed with new_state %u and result %u\n",
 197                         state, new_state, result);
 198
 199         return;
 200 }
 201
 202
 203 /**
 204  * speedstep_target - set a new CPUFreq policy
 205  * @policy: new policy
 206  * @index: index of new freq
 207  *
 208  * Sets a new CPUFreq policy/freq.
 209  */
 210 static int speedstep_target(struct cpufreq_policy *policy, unsigned int index)
 211 {
 212         speedstep_set_state(index);
 213
 214         return 0;
 215 }
 216
 217
 218 static int speedstep_cpu_init(struct cpufreq_policy *policy)
 219 {
 220         int result;
 221         unsigned int *low, *high;
 222
 223         /* capability check */
 224         if (policy->cpu != 0)
 225                 return -ENODEV;
 226
 227         result = speedstep_smi_ownership();
 228         if (result) {
 229                 pr_debug("fails in acquiring ownership of a SMI interface.\n");
 230                 return -EINVAL;
 231         }
 232
 233         /* detect low and high frequency */
 234         low = &speedstep_freqs[SPEEDSTEP_LOW].frequency;
 235         high = &speedstep_freqs[SPEEDSTEP_HIGH].frequency;
 236
 237         result = speedstep_smi_get_freqs(low, high);
 238         if (result) {
 239                 /* fall back to speedstep_lib.c dection mechanism:
 240                  * try both states out */
 241                 pr_debug("could not detect low and high frequencies "
 242                                 "by SMI call.\n");
 243                 result = speedstep_get_freqs(speedstep_processor,
 244                                 low, high,
 245                                 NULL,
 246                                 &speedstep_set_state);
 247
 248                 if (result) {
 249                         pr_debug("could not detect two different speeds"
 250                                         " -- aborting.\n");
 251                         return result;
 252                 } else
 253                         pr_debug("workaround worked.\n");
 254         }
 255
 256         policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
 257         return cpufreq_table_validate_and_show(policy, speedstep_freqs);
 258 }
 259
 260 static unsigned int speedstep_get(unsigned int cpu)
 261 {
 262         if (cpu)
 263                 return -ENODEV;
 264         return speedstep_get_frequency(speedstep_processor);
 265 }
 266
 267
 268 static int speedstep_resume(struct cpufreq_policy *policy)
 269 {
 270         int result = speedstep_smi_ownership();
 271
 272         if (result)
 273                 pr_debug("fails in re-acquiring ownership of a SMI interface.\n");
 274
 275         return result;
 276 }
 277
 278 static struct cpufreq_driver speedstep_driver = {
 279         .name           = "speedstep-smi",
 280         .verify         = cpufreq_generic_frequency_table_verify,
 281         .target_index   = speedstep_target,
 282         .init           = speedstep_cpu_init,
 283         .get            = speedstep_get,
 284         .resume         = speedstep_resume,
 285         .attr           = cpufreq_generic_attr,
 286 };
 287
 288 static const struct x86_cpu_id ss_smi_ids[] = {
 289         { X86_VENDOR_INTEL, 6, 0xb, },
 290         { X86_VENDOR_INTEL, 6, 0x8, },
 291         { X86_VENDOR_INTEL, 15, 2 },
 292         {}
 293 };
 294 #if 0
 295 /* Not auto loaded currently */
 296 MODULE_DEVICE_TABLE(x86cpu, ss_smi_ids);
 297 #endif
 298
 299 /**
 300  * speedstep_init - initializes the SpeedStep CPUFreq driver
 301  *
 302  *   Initializes the SpeedStep support. Returns -ENODEV on unsupported
 303  * BIOS, -EINVAL on problems during initiatization, and zero on
 304  * success.
 305  */
 306 static int __init speedstep_init(void)
 307 {
 308         if (!x86_match_cpu(ss_smi_ids))
 309                 return -ENODEV;
 310
 311         speedstep_processor = speedstep_detect_processor();
 312
 313         switch (speedstep_processor) {
 314         case SPEEDSTEP_CPU_PIII_T:
 315         case SPEEDSTEP_CPU_PIII_C:
 316         case SPEEDSTEP_CPU_PIII_C_EARLY:
 317                 break;
 318         default:
 319                 speedstep_processor = 0;
 320         }
 321
 322         if (!speedstep_processor) {
 323                 pr_debug("No supported Intel CPU detected.\n");
 324                 return -ENODEV;
 325         }
 326
 327         pr_debug("signature:0x%.8x, command:0x%.8x, "
 328                 "event:0x%.8x, perf_level:0x%.8x.\n",
 329                 ist_info.signature, ist_info.command,
 330                 ist_info.event, ist_info.perf_level);
 331
 332         /* Error if no IST-SMI BIOS or no PARM
 333                  sig= 'ISGE' aka 'Intel Speedstep Gate E' */
 334         if ((ist_info.signature !=  0x47534943) && (
 335             (smi_port == 0) || (smi_cmd == 0)))
 336                 return -ENODEV;
 337
 338         if (smi_sig == 1)
 339                 smi_sig = 0x47534943;
 340         else
 341                 smi_sig = ist_info.signature;
 342
 343         /* setup smi_port from MODLULE_PARM or BIOS */
 344         if ((smi_port > 0xff) || (smi_port < 0))
 345                 return -EINVAL;
 346         else if (smi_port == 0)
 347                 smi_port = ist_info.command & 0xff;
 348
 349         if ((smi_cmd > 0xff) || (smi_cmd < 0))
 350                 return -EINVAL;
 351         else if (smi_cmd == 0)
 352                 smi_cmd = (ist_info.command >> 16) & 0xff;
 353
 354         return cpufreq_register_driver(&speedstep_driver);
 355 }
 356
 357
 358 /**
 359  * speedstep_exit - unregisters SpeedStep support
 360  *
 361  *   Unregisters SpeedStep support.
 362  */
 363 static void __exit speedstep_exit(void)
 364 {
 365         cpufreq_unregister_driver(&speedstep_driver);
 366 }
 367
 368 module_param(smi_port, int, 0444);
 369 module_param(smi_cmd,  int, 0444);
 370 module_param(smi_sig, uint, 0444);
 371
 372 MODULE_PARM_DESC(smi_port, "Override the BIOS-given IST port with this value "
 373                 "-- Intel's default setting is 0xb2");
 374 MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value "
 375                 "-- Intel's default setting is 0x82");
 376 MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the "
 377                 "SMI interface.");
 378
 379 MODULE_AUTHOR("Hiroshi Miura");
 380 MODULE_DESCRIPTION("Speedstep driver for IST applet SMI interface.");
 381 MODULE_LICENSE("GPL");
 382
 383 module_init(speedstep_init);
 384 module_exit(speedstep_exit);