Merge ../linus
[linux-drm-fsl-dcu.git] / drivers / char / riscom8.h
1 /*
2  *      linux/drivers/char/riscom8.h  -- RISCom/8 multiport serial driver.
3  *
4  *      Copyright (C) 1994-1996  Dmitry Gorodchanin (pgmdsg@ibi.com)
5  *
6  *      This code is loosely based on the Linux serial driver, written by
7  *      Linus Torvalds, Theodore T'so and others. The RISCom/8 card 
8  *      programming info was obtained from various drivers for other OSes 
9  *      (FreeBSD, ISC, etc), but no source code from those drivers were 
10  *      directly included in this driver.
11  *
12  *
13  *      This program is free software; you can redistribute it and/or modify
14  *      it under the terms of the GNU General Public License as published by
15  *      the Free Software Foundation; either version 2 of the License, or
16  *      (at your option) any later version.
17  *
18  *      This program is distributed in the hope that it will be useful,
19  *      but WITHOUT ANY WARRANTY; without even the implied warranty of
20  *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
21  *      GNU General Public License for more details.
22  *
23  *      You should have received a copy of the GNU General Public License
24  *      along with this program; if not, write to the Free Software
25  *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
26  */
27
28 #ifndef __LINUX_RISCOM8_H
29 #define __LINUX_RISCOM8_H
30
31 #include <linux/serial.h>
32
33 #ifdef __KERNEL__
34
35 #define RC_NBOARD               4
36 /* NOTE: RISCom decoder recognizes 16 addresses... */
37 #define RC_NPORT                8  
38 #define RC_BOARD(line)          (((line) >> 3) & 0x07)
39 #define RC_PORT(line)           ((line) & (RC_NPORT - 1))
40
41 /* Ticks per sec. Used for setting receiver timeout and break length */
42 #define RISCOM_TPS              4000
43
44 /* Yeah, after heavy testing I decided it must be 6.
45  * Sure, You can change it if needed.
46  */
47 #define RISCOM_RXFIFO           6       /* Max. receiver FIFO size (1-8) */
48
49 #define RISCOM8_MAGIC           0x0907
50
51 #define RC_IOBASE1      0x220
52 #define RC_IOBASE2      0x240
53 #define RC_IOBASE3      0x250
54 #define RC_IOBASE4      0x260
55
56 struct riscom_board {
57         unsigned long   flags;
58         unsigned short  base;
59         unsigned char   irq;
60         signed   char   count;
61         unsigned char   DTR;
62 };
63
64 #define RC_BOARD_PRESENT        0x00000001
65 #define RC_BOARD_ACTIVE         0x00000002
66         
67 struct riscom_port {
68         int                     magic;
69         int                     baud_base;
70         int                     flags;
71         struct tty_struct       * tty;
72         int                     count;
73         int                     blocked_open;
74         long                    event; /* long req'd for set_bit --RR */
75         int                     timeout;
76         int                     close_delay;
77         unsigned char           * xmit_buf;
78         int                     custom_divisor;
79         int                     xmit_head;
80         int                     xmit_tail;
81         int                     xmit_cnt;
82         wait_queue_head_t       open_wait;
83         wait_queue_head_t       close_wait;
84         struct work_struct      tqueue;
85         struct work_struct      tqueue_hangup;
86         short                   wakeup_chars;
87         short                   break_length;
88         unsigned short          closing_wait;
89         unsigned char           mark_mask;
90         unsigned char           IER;
91         unsigned char           MSVR;
92         unsigned char           COR2;
93 #ifdef RC_REPORT_OVERRUN
94         unsigned long           overrun;
95 #endif  
96 #ifdef RC_REPORT_FIFO
97         unsigned long           hits[10];
98 #endif
99 };
100
101 #endif /* __KERNEL__ */
102 #endif /* __LINUX_RISCOM8_H */