drivers/char/ip2/i2lib.c

   1 /*******************************************************************************
   2 *
   3 *   (c) 1999 by Computone Corporation
   4 *
   5 ********************************************************************************
   6 *
   7 *
   8 *   PACKAGE:     Linux tty Device Driver for IntelliPort family of multiport
   9 *                serial I/O controllers.
  10 *
  11 *   DESCRIPTION: High-level interface code for the device driver. Uses the
  12 *                Extremely Low Level Interface Support (i2ellis.c). Provides an
  13 *                interface to the standard loadware, to support drivers or
  14 *                application code. (This is included source code, not a separate
  15 *                compilation module.)
  16 *
  17 *******************************************************************************/
  18 //------------------------------------------------------------------------------
  19 // Note on Strategy:
  20 // Once the board has been initialized, it will interrupt us when:
  21 // 1) It has something in the fifo for us to read (incoming data, flow control
  22 // packets, or whatever).
  23 // 2) It has stripped whatever we have sent last time in the FIFO (and
  24 // consequently is ready for more).
  25 //
  26 // Note also that the buffer sizes declared in i2lib.h are VERY SMALL. This
  27 // worsens performance considerably, but is done so that a great many channels
  28 // might use only a little memory.
  29 //------------------------------------------------------------------------------
  30
  31 //------------------------------------------------------------------------------
  32 // Revision History:
  33 //
  34 // 0.00 -  4/16/91 --- First Draft
  35 // 0.01 -  4/29/91 --- 1st beta release
  36 // 0.02 -  6/14/91 --- Changes to allow small model compilation
  37 // 0.03 -  6/17/91 MAG Break reporting protected from interrupts routines with
  38 //                     in-line asm added for moving data to/from ring buffers,
  39 //                     replacing a variety of methods used previously.
  40 // 0.04 -  6/21/91 MAG Initial flow-control packets not queued until
  41 //                     i2_enable_interrupts time. Former versions would enqueue
  42 //                     them at i2_init_channel time, before we knew how many
  43 //                     channels were supposed to exist!
  44 // 0.05 - 10/12/91 MAG Major changes: works through the ellis.c routines now;
  45 //                     supports new 16-bit protocol and expandable boards.
  46 //      - 10/24/91 MAG Most changes in place and stable.
  47 // 0.06 -  2/20/92 MAG Format of CMD_HOTACK corrected: the command takes no
  48 //                     argument.
  49 // 0.07 -- 3/11/92 MAG Support added to store special packet types at interrupt
  50 //                     level (mostly responses to specific commands.)
  51 // 0.08 -- 3/30/92 MAG Support added for STAT_MODEM packet
  52 // 0.09 -- 6/24/93 MAG i2Link... needed to update number of boards BEFORE
  53 //                     turning on the interrupt.
  54 // 0.10 -- 6/25/93 MAG To avoid gruesome death from a bad board, we sanity check
  55 //                     some incoming.
  56 //
  57 // 1.1  - 12/25/96 AKM Linux version.
  58 //      - 10/09/98 DMC Revised Linux version.
  59 //------------------------------------------------------------------------------
  60
  61 //************
  62 //* Includes *
  63 //************
  64
  65 #include <linux/sched.h>
  66 #include "i2lib.h"
  67
  68
  69 //***********************
  70 //* Function Prototypes *
  71 //***********************
  72 static void i2QueueNeeds(i2eBordStrPtr, i2ChanStrPtr, int);
  73 static i2ChanStrPtr i2DeQueueNeeds(i2eBordStrPtr, int );
  74 static void i2StripFifo(i2eBordStrPtr);
  75 static void i2StuffFifoBypass(i2eBordStrPtr);
  76 static void i2StuffFifoFlow(i2eBordStrPtr);
  77 static void i2StuffFifoInline(i2eBordStrPtr);
  78 static int i2RetryFlushOutput(i2ChanStrPtr);
  79
  80 // Not a documented part of the library routines (careful...) but the Diagnostic
  81 // i2diag.c finds them useful to help the throughput in certain limited
  82 // single-threaded operations.
  83 static void iiSendPendingMail(i2eBordStrPtr);
  84 static void serviceOutgoingFifo(i2eBordStrPtr);
  85
  86 // Functions defined in ip2.c as part of interrupt handling
  87 static void do_input(void *);
  88 static void do_status(void *);
  89
  90 //***************
  91 //* Debug  Data *
  92 //***************
  93 #ifdef DEBUG_FIFO
  94
  95 unsigned char DBGBuf[0x4000];
  96 unsigned short I = 0;
  97
  98 static void
  99 WriteDBGBuf(char *s, unsigned char *src, unsigned short n )
 100 {
 101         char *p = src;
 102
 103         // XXX: We need a spin lock here if we ever use this again
 104
 105         while (*s) {    // copy label
 106                 DBGBuf[I] = *s++;
 107                 I = I++ & 0x3fff;
 108         }
 109         while (n--) {   // copy data
 110                 DBGBuf[I] = *p++;
 111                 I = I++ & 0x3fff;
 112         }
 113 }
 114
 115 static void
 116 fatality(i2eBordStrPtr pB )
 117 {
 118         int i;
 119
 120         for (i=0;i<sizeof(DBGBuf);i++) {
 121                 if ((i%16) == 0)
 122                         printk("\n%4x:",i);
 123                 printk("%02x ",DBGBuf[i]);
 124         }
 125         printk("\n");
 126         for (i=0;i<sizeof(DBGBuf);i++) {
 127                 if ((i%16) == 0)
 128                         printk("\n%4x:",i);
 129                 if (DBGBuf[i] >= ' ' && DBGBuf[i] <= '~') {
 130                         printk(" %c ",DBGBuf[i]);
 131                 } else {
 132                         printk(" . ");
 133                 }
 134         }
 135         printk("\n");
 136         printk("Last index %x\n",I);
 137 }
 138 #endif /* DEBUG_FIFO */
 139
 140 //********
 141 //* Code *
 142 //********
 143
 144 static inline int
 145 i2Validate ( i2ChanStrPtr pCh )
 146 {
 147         //ip2trace(pCh->port_index, ITRC_VERIFY,ITRC_ENTER,2,pCh->validity,
 148         //      (CHANNEL_MAGIC | CHANNEL_SUPPORT));
 149         return ((pCh->validity & (CHANNEL_MAGIC_BITS | CHANNEL_SUPPORT))
 150                           == (CHANNEL_MAGIC | CHANNEL_SUPPORT));
 151 }
 152
 153 //******************************************************************************
 154 // Function:   iiSendPendingMail(pB)
 155 // Parameters: Pointer to a board structure
 156 // Returns:    Nothing
 157 //
 158 // Description:
 159 // If any outgoing mail bits are set and there is outgoing mailbox is empty,
 160 // send the mail and clear the bits.
 161 //******************************************************************************
 162 static inline void
 163 iiSendPendingMail(i2eBordStrPtr pB)
 164 {
 165         if (pB->i2eOutMailWaiting && (!pB->i2eWaitingForEmptyFifo) )
 166         {
 167                 if (iiTrySendMail(pB, pB->i2eOutMailWaiting))
 168                 {
 169                         /* If we were already waiting for fifo to empty,
 170                          * or just sent MB_OUT_STUFFED, then we are
 171                          * still waiting for it to empty, until we should
 172                          * receive an MB_IN_STRIPPED from the board.
 173                          */
 174                         pB->i2eWaitingForEmptyFifo |=
 175                                 (pB->i2eOutMailWaiting & MB_OUT_STUFFED);
 176                         pB->i2eOutMailWaiting = 0;
 177                         pB->SendPendingRetry = 0;
 178                 } else {
 179 /*              The only time we hit this area is when "iiTrySendMail" has
 180                 failed.  That only occurs when the outbound mailbox is
 181                 still busy with the last message.  We take a short breather
 182                 to let the board catch up with itself and then try again.
 183                 16 Retries is the limit - then we got a borked board.
 184                         /\/\|=mhw=|\/\/                         */
 185
 186                         if( ++pB->SendPendingRetry < 16 ) {
 187
 188                                 init_timer( &(pB->SendPendingTimer) );
 189                                 pB->SendPendingTimer.expires  = jiffies + 1;
 190                                 pB->SendPendingTimer.function = (void*)(unsigned long)iiSendPendingMail;
 191                                 pB->SendPendingTimer.data     = (unsigned long)pB;
 192                                 add_timer( &(pB->SendPendingTimer) );
 193                         } else {
 194                                 printk( KERN_ERR "IP2: iiSendPendingMail unable to queue outbound mail\n" );
 195                         }
 196                 }
 197         }
 198 }
 199
 200 //******************************************************************************
 201 // Function:   i2InitChannels(pB, nChannels, pCh)
 202 // Parameters: Pointer to Ellis Board structure
 203 //             Number of channels to initialize
 204 //             Pointer to first element in an array of channel structures
 205 // Returns:    Success or failure
 206 //
 207 // Description:
 208 //
 209 // This function patches pointers, back-pointers, and initializes all the
 210 // elements in the channel structure array.
 211 //
 212 // This should be run after the board structure is initialized, through having
 213 // loaded the standard loadware (otherwise it complains).
 214 //
 215 // In any case, it must be done before any serious work begins initializing the
 216 // irq's or sending commands...
 217 //
 218 //******************************************************************************
 219 static int
 220 i2InitChannels ( i2eBordStrPtr pB, int nChannels, i2ChanStrPtr pCh)
 221 {
 222         int index, stuffIndex;
 223         i2ChanStrPtr *ppCh;
 224
 225         if (pB->i2eValid != I2E_MAGIC) {
 226                 COMPLETE(pB, I2EE_BADMAGIC);
 227         }
 228         if (pB->i2eState != II_STATE_STDLOADED) {
 229                 COMPLETE(pB, I2EE_BADSTATE);
 230         }
 231
 232         LOCK_INIT(&pB->read_fifo_spinlock);
 233         LOCK_INIT(&pB->write_fifo_spinlock);
 234         LOCK_INIT(&pB->Dbuf_spinlock);
 235         LOCK_INIT(&pB->Bbuf_spinlock);
 236         LOCK_INIT(&pB->Fbuf_spinlock);
 237
 238         // NO LOCK needed yet - this is init
 239
 240         pB->i2eChannelPtr = pCh;
 241         pB->i2eChannelCnt = nChannels;
 242
 243         pB->i2Fbuf_strip = pB->i2Fbuf_stuff = 0;
 244         pB->i2Dbuf_strip = pB->i2Dbuf_stuff = 0;
 245         pB->i2Bbuf_strip = pB->i2Bbuf_stuff = 0;
 246
 247         pB->SendPendingRetry = 0;
 248
 249         memset ( pCh, 0, sizeof (i2ChanStr) * nChannels );
 250
 251         for (index = stuffIndex = 0, ppCh = (i2ChanStrPtr *)(pB->i2Fbuf);
 252                   nChannels && index < ABS_MOST_PORTS;
 253                   index++)
 254         {
 255                 if ( !(pB->i2eChannelMap[index >> 4] & (1 << (index & 0xf)) ) ) {
 256                         continue;
 257                 }
 258                 LOCK_INIT(&pCh->Ibuf_spinlock);
 259                 LOCK_INIT(&pCh->Obuf_spinlock);
 260                 LOCK_INIT(&pCh->Cbuf_spinlock);
 261                 LOCK_INIT(&pCh->Pbuf_spinlock);
 262                 // NO LOCK needed yet - this is init
 263                 // Set up validity flag according to support level
 264                 if (pB->i2eGoodMap[index >> 4] & (1 << (index & 0xf)) ) {
 265                         pCh->validity = CHANNEL_MAGIC | CHANNEL_SUPPORT;
 266                 } else {
 267                         pCh->validity = CHANNEL_MAGIC;
 268                 }
 269                 pCh->pMyBord = pB;      /* Back-pointer */
 270
 271                 // Prepare an outgoing flow-control packet to send as soon as the chance
 272                 // occurs.
 273                 if ( pCh->validity & CHANNEL_SUPPORT ) {
 274                         pCh->infl.hd.i2sChannel = index;
 275                         pCh->infl.hd.i2sCount = 5;
 276                         pCh->infl.hd.i2sType = PTYPE_BYPASS;
 277                         pCh->infl.fcmd = 37;
 278                         pCh->infl.asof = 0;
 279                         pCh->infl.room = IBUF_SIZE - 1;
 280
 281                         pCh->whenSendFlow = (IBUF_SIZE/5)*4; // when 80% full
 282
 283                 // The following is similar to calling i2QueueNeeds, except that this
 284                 // is done in longhand, since we are setting up initial conditions on
 285                 // many channels at once.
 286                         pCh->channelNeeds = NEED_FLOW;  // Since starting from scratch
 287                         pCh->sinceLastFlow = 0;         // No bytes received since last flow
 288                                                                                         // control packet was queued
 289                         stuffIndex++;
 290                         *ppCh++ = pCh;      // List this channel as needing
 291                                                                 // initial flow control packet sent
 292                 }
 293
 294                 // Don't allow anything to be sent until the status packets come in from
 295                 // the board.
 296
 297                 pCh->outfl.asof = 0;
 298                 pCh->outfl.room = 0;
 299
 300                 // Initialize all the ring buffers
 301
 302                 pCh->Ibuf_stuff = pCh->Ibuf_strip = 0;
 303                 pCh->Obuf_stuff = pCh->Obuf_strip = 0;
 304                 pCh->Cbuf_stuff = pCh->Cbuf_strip = 0;
 305
 306                 memset( &pCh->icount, 0, sizeof (struct async_icount) );
 307                 pCh->hotKeyIn       = HOT_CLEAR;
 308                 pCh->channelOptions = 0;
 309                 pCh->bookMarks      = 0;
 310                 init_waitqueue_head(&pCh->pBookmarkWait);
 311
 312                 init_waitqueue_head(&pCh->open_wait);
 313                 init_waitqueue_head(&pCh->close_wait);
 314                 init_waitqueue_head(&pCh->delta_msr_wait);
 315
 316                 // Set base and divisor so default custom rate is 9600
 317                 pCh->BaudBase    = 921600;      // MAX for ST654, changed after we get
 318                 pCh->BaudDivisor = 96;          // the boxids (UART types) later
 319
 320                 pCh->dataSetIn   = 0;
 321                 pCh->dataSetOut  = 0;
 322
 323                 pCh->wopen       = 0;
 324                 pCh->throttled   = 0;
 325
 326                 pCh->speed       = CBR_9600;
 327
 328                 pCh->flags    = 0;
 329
 330                 pCh->ClosingDelay     = 5*HZ/10;
 331                 pCh->ClosingWaitTime  = 30*HZ;
 332
 333                 // Initialize task queue objects
 334                 INIT_WORK(&pCh->tqueue_input, do_input, pCh);
 335                 INIT_WORK(&pCh->tqueue_status, do_status, pCh);
 336
 337 #ifdef IP2DEBUG_TRACE
 338                 pCh->trace = ip2trace;
 339 #endif
 340
 341                 ++pCh;
 342         --nChannels;
 343         }
 344         // No need to check for wrap here; this is initialization.
 345         pB->i2Fbuf_stuff = stuffIndex;
 346         COMPLETE(pB, I2EE_GOOD);
 347
 348 }
 349
 350 //******************************************************************************
 351 // Function:   i2DeQueueNeeds(pB, type)
 352 // Parameters: Pointer to a board structure
 353 //             type bit map: may include NEED_INLINE, NEED_BYPASS, or NEED_FLOW
 354 // Returns:
 355 //             Pointer to a channel structure
 356 //
 357 // Description: Returns pointer struct of next channel that needs service of
 358 //  the type specified. Otherwise returns a NULL reference.
 359 //
 360 //******************************************************************************
 361 static i2ChanStrPtr
 362 i2DeQueueNeeds(i2eBordStrPtr pB, int type)
 363 {
 364         unsigned short queueIndex;
 365         unsigned long flags;
 366
 367         i2ChanStrPtr pCh = NULL;
 368
 369         switch(type) {
 370
 371         case  NEED_INLINE:
 372
 373                 WRITE_LOCK_IRQSAVE(&pB->Dbuf_spinlock,flags);
 374                 if ( pB->i2Dbuf_stuff != pB->i2Dbuf_strip)
 375                 {
 376                         queueIndex = pB->i2Dbuf_strip;
 377                         pCh = pB->i2Dbuf[queueIndex];
 378                         queueIndex++;
 379                         if (queueIndex >= CH_QUEUE_SIZE) {
 380                                 queueIndex = 0;
 381                         }
 382                         pB->i2Dbuf_strip = queueIndex;
 383                         pCh->channelNeeds &= ~NEED_INLINE;
 384                 }
 385                 WRITE_UNLOCK_IRQRESTORE(&pB->Dbuf_spinlock,flags);
 386                 break;
 387
 388         case NEED_BYPASS:
 389
 390                 WRITE_LOCK_IRQSAVE(&pB->Bbuf_spinlock,flags);
 391                 if (pB->i2Bbuf_stuff != pB->i2Bbuf_strip)
 392                 {
 393                         queueIndex = pB->i2Bbuf_strip;
 394                         pCh = pB->i2Bbuf[queueIndex];
 395                         queueIndex++;
 396                         if (queueIndex >= CH_QUEUE_SIZE) {
 397                                 queueIndex = 0;
 398                         }
 399                         pB->i2Bbuf_strip = queueIndex;
 400                         pCh->channelNeeds &= ~NEED_BYPASS;
 401                 }
 402                 WRITE_UNLOCK_IRQRESTORE(&pB->Bbuf_spinlock,flags);
 403                 break;
 404
 405         case NEED_FLOW:
 406
 407                 WRITE_LOCK_IRQSAVE(&pB->Fbuf_spinlock,flags);
 408                 if (pB->i2Fbuf_stuff != pB->i2Fbuf_strip)
 409                 {
 410                         queueIndex = pB->i2Fbuf_strip;
 411                         pCh = pB->i2Fbuf[queueIndex];
 412                         queueIndex++;
 413                         if (queueIndex >= CH_QUEUE_SIZE) {
 414                                 queueIndex = 0;
 415                         }
 416                         pB->i2Fbuf_strip = queueIndex;
 417                         pCh->channelNeeds &= ~NEED_FLOW;
 418                 }
 419                 WRITE_UNLOCK_IRQRESTORE(&pB->Fbuf_spinlock,flags);
 420                 break;
 421         default:
 422                 printk(KERN_ERR "i2DeQueueNeeds called with bad type:%x\n",type);
 423                 break;
 424         }
 425         return pCh;
 426 }
 427
 428 //******************************************************************************
 429 // Function:   i2QueueNeeds(pB, pCh, type)
 430 // Parameters: Pointer to a board structure
 431 //             Pointer to a channel structure
 432 //             type bit map: may include NEED_INLINE, NEED_BYPASS, or NEED_FLOW
 433 // Returns:    Nothing
 434 //
 435 // Description:
 436 // For each type of need selected, if the given channel is not already in the
 437 // queue, adds it, and sets the flag indicating it is in the queue.
 438 //******************************************************************************
 439 static void
 440 i2QueueNeeds(i2eBordStrPtr pB, i2ChanStrPtr pCh, int type)
 441 {
 442         unsigned short queueIndex;
 443         unsigned long flags;
 444
 445         // We turn off all the interrupts during this brief process, since the
 446         // interrupt-level code might want to put things on the queue as well.
 447
 448         switch (type) {
 449
 450         case NEED_INLINE:
 451
 452                 WRITE_LOCK_IRQSAVE(&pB->Dbuf_spinlock,flags);
 453                 if ( !(pCh->channelNeeds & NEED_INLINE) )
 454                 {
 455                         pCh->channelNeeds |= NEED_INLINE;
 456                         queueIndex = pB->i2Dbuf_stuff;
 457                         pB->i2Dbuf[queueIndex++] = pCh;
 458                         if (queueIndex >= CH_QUEUE_SIZE)
 459                                 queueIndex = 0;
 460                         pB->i2Dbuf_stuff = queueIndex;
 461                 }
 462                 WRITE_UNLOCK_IRQRESTORE(&pB->Dbuf_spinlock,flags);
 463                 break;
 464
 465         case NEED_BYPASS:
 466
 467                 WRITE_LOCK_IRQSAVE(&pB->Bbuf_spinlock,flags);
 468                 if ((type & NEED_BYPASS) && !(pCh->channelNeeds & NEED_BYPASS))
 469                 {
 470                         pCh->channelNeeds |= NEED_BYPASS;
 471                         queueIndex = pB->i2Bbuf_stuff;
 472                         pB->i2Bbuf[queueIndex++] = pCh;
 473                         if (queueIndex >= CH_QUEUE_SIZE)
 474                                 queueIndex = 0;
 475                         pB->i2Bbuf_stuff = queueIndex;
 476                 }
 477                 WRITE_UNLOCK_IRQRESTORE(&pB->Bbuf_spinlock,flags);
 478                 break;
 479
 480         case NEED_FLOW:
 481
 482                 WRITE_LOCK_IRQSAVE(&pB->Fbuf_spinlock,flags);
 483                 if ((type & NEED_FLOW) && !(pCh->channelNeeds & NEED_FLOW))
 484                 {
 485                         pCh->channelNeeds |= NEED_FLOW;
 486                         queueIndex = pB->i2Fbuf_stuff;
 487                         pB->i2Fbuf[queueIndex++] = pCh;
 488                         if (queueIndex >= CH_QUEUE_SIZE)
 489                                 queueIndex = 0;
 490                         pB->i2Fbuf_stuff = queueIndex;
 491                 }
 492                 WRITE_UNLOCK_IRQRESTORE(&pB->Fbuf_spinlock,flags);
 493                 break;
 494
 495         case NEED_CREDIT:
 496                 pCh->channelNeeds |= NEED_CREDIT;
 497                 break;
 498         default:
 499                 printk(KERN_ERR "i2QueueNeeds called with bad type:%x\n",type);
 500                 break;
 501         }
 502         return;
 503 }
 504
 505 //******************************************************************************
 506 // Function:   i2QueueCommands(type, pCh, timeout, nCommands, pCs,...)
 507 // Parameters: type - PTYPE_BYPASS or PTYPE_INLINE
 508 //             pointer to the channel structure
 509 //             maximum period to wait
 510 //             number of commands (n)
 511 //             n commands
 512 // Returns:    Number of commands sent, or -1 for error
 513 //
 514 // get board lock before calling
 515 //
 516 // Description:
 517 // Queues up some commands to be sent to a channel. To send possibly several
 518 // bypass or inline commands to the given channel. The timeout parameter
 519 // indicates how many HUNDREDTHS OF SECONDS to wait until there is room:
 520 // 0 = return immediately if no room, -ive  = wait forever, +ive = number of
 521 // 1/100 seconds to wait. Return values:
 522 // -1 Some kind of nasty error: bad channel structure or invalid arguments.
 523 //  0 No room to send all the commands
 524 // (+)   Number of commands sent
 525 //******************************************************************************
 526 static int
 527 i2QueueCommands(int type, i2ChanStrPtr pCh, int timeout, int nCommands,
 528                                          cmdSyntaxPtr pCs0,...)
 529 {
 530         int totalsize = 0;
 531         int blocksize;
 532         int lastended;
 533         cmdSyntaxPtr *ppCs;
 534         cmdSyntaxPtr pCs;
 535         int count;
 536         int flag;
 537         i2eBordStrPtr pB;
 538
 539         unsigned short maxBlock;
 540         unsigned short maxBuff;
 541         short bufroom;
 542         unsigned short stuffIndex;
 543         unsigned char *pBuf;
 544         unsigned char *pInsert;
 545         unsigned char *pDest, *pSource;
 546         unsigned short channel;
 547         int cnt;
 548         unsigned long flags = 0;
 549         rwlock_t *lock_var_p = NULL;
 550
 551         // Make sure the channel exists, otherwise do nothing
 552         if ( !i2Validate ( pCh ) ) {
 553                 return -1;
 554         }
 555
 556         ip2trace (CHANN, ITRC_QUEUE, ITRC_ENTER, 0 );
 557
 558         pB = pCh->pMyBord;
 559
 560         // Board must also exist, and THE INTERRUPT COMMAND ALREADY SENT
 561         if (pB->i2eValid != I2E_MAGIC || pB->i2eUsingIrq == IRQ_UNDEFINED) {
 562                 return -2;
 563         }
 564         // If the board has gone fatal, return bad, and also hit the trap routine if
 565         // it exists.
 566         if (pB->i2eFatal) {
 567                 if ( pB->i2eFatalTrap ) {
 568                         (*(pB)->i2eFatalTrap)(pB);
 569                 }
 570                 return -3;
 571         }
 572         // Set up some variables, Which buffers are we using?  How big are they?
 573         switch(type)
 574         {
 575         case PTYPE_INLINE:
 576                 flag = INL;
 577                 maxBlock = MAX_OBUF_BLOCK;
 578                 maxBuff = OBUF_SIZE;
 579                 pBuf = pCh->Obuf;
 580                 break;
 581         case PTYPE_BYPASS:
 582                 flag = BYP;
 583                 maxBlock = MAX_CBUF_BLOCK;
 584                 maxBuff = CBUF_SIZE;
 585                 pBuf = pCh->Cbuf;
 586                 break;
 587         default:
 588                 return -4;
 589         }
 590         // Determine the total size required for all the commands
 591         totalsize = blocksize = sizeof(i2CmdHeader);
 592         lastended = 0;
 593         ppCs = &pCs0;
 594         for ( count = nCommands; count; count--, ppCs++)
 595         {
 596                 pCs = *ppCs;
 597                 cnt = pCs->length;
 598                 // Will a new block be needed for this one?
 599                 // Two possible reasons: too
 600                 // big or previous command has to be at the end of a packet.
 601                 if ((blocksize + cnt > maxBlock) || lastended) {
 602                         blocksize = sizeof(i2CmdHeader);
 603                         totalsize += sizeof(i2CmdHeader);
 604                 }
 605                 totalsize += cnt;
 606                 blocksize += cnt;
 607
 608                 // If this command had to end a block, then we will make sure to
 609                 // account for it should there be any more blocks.
 610                 lastended = pCs->flags & END;
 611         }
 612         for (;;) {
 613                 // Make sure any pending flush commands go out before we add more data.
 614                 if ( !( pCh->flush_flags && i2RetryFlushOutput( pCh ) ) ) {
 615                         // How much room (this time through) ?
 616                         switch(type) {
 617                         case PTYPE_INLINE:
 618                                 lock_var_p = &pCh->Obuf_spinlock;
 619                                 WRITE_LOCK_IRQSAVE(lock_var_p,flags);
 620                                 stuffIndex = pCh->Obuf_stuff;
 621                                 bufroom = pCh->Obuf_strip - stuffIndex;
 622                                 break;
 623                         case PTYPE_BYPASS:
 624                                 lock_var_p = &pCh->Cbuf_spinlock;
 625                                 WRITE_LOCK_IRQSAVE(lock_var_p,flags);
 626                                 stuffIndex = pCh->Cbuf_stuff;
 627                                 bufroom = pCh->Cbuf_strip - stuffIndex;
 628                                 break;
 629                         default:
 630                                 return -5;
 631                         }
 632                         if (--bufroom < 0) {
 633                                 bufroom += maxBuff;
 634                         }
 635
 636                         ip2trace (CHANN, ITRC_QUEUE, 2, 1, bufroom );
 637
 638                         // Check for overflow
 639                         if (totalsize <= bufroom) {
 640                                 // Normal Expected path - We still hold LOCK
 641                                 break; /* from for()- Enough room: goto proceed */
 642                         }
 643                 }
 644
 645                 ip2trace (CHANN, ITRC_QUEUE, 3, 1, totalsize );
 646
 647                 // Prepare to wait for buffers to empty
 648                 WRITE_UNLOCK_IRQRESTORE(lock_var_p,flags);
 649                 serviceOutgoingFifo(pB);        // Dump what we got
 650
 651                 if (timeout == 0) {
 652                         return 0;   // Tired of waiting
 653                 }
 654                 if (timeout > 0)
 655                         timeout--;   // So negative values == forever
 656
 657                 if (!in_interrupt()) {
 658                         schedule_timeout_interruptible(1);      // short nap
 659                 } else {
 660                         // we cannot sched/sleep in interrrupt silly
 661                         return 0;
 662                 }
 663                 if (signal_pending(current)) {
 664                         return 0;   // Wake up! Time to die!!!
 665                 }
 666
 667                 ip2trace (CHANN, ITRC_QUEUE, 4, 0 );
 668
 669         }       // end of for(;;)
 670
 671         // At this point we have room and the lock - stick them in.
 672         channel = pCh->infl.hd.i2sChannel;
 673         pInsert = &pBuf[stuffIndex];     // Pointer to start of packet
 674         pDest = CMD_OF(pInsert);         // Pointer to start of command
 675
 676         // When we start counting, the block is the size of the header
 677         for (blocksize = sizeof(i2CmdHeader), count = nCommands,
 678                         lastended = 0, ppCs = &pCs0;
 679                 count;
 680                 count--, ppCs++)
 681         {
 682                 pCs = *ppCs;         // Points to command protocol structure
 683
 684                 // If this is a bookmark request command, post the fact that a bookmark
 685                 // request is pending. NOTE THIS TRICK ONLY WORKS BECAUSE CMD_BMARK_REQ
 686                 // has no parameters!  The more general solution would be to reference
 687                 // pCs->cmd[0].
 688                 if (pCs == CMD_BMARK_REQ) {
 689                         pCh->bookMarks++;
 690
 691                         ip2trace (CHANN, ITRC_DRAIN, 30, 1, pCh->bookMarks );
 692
 693                 }
 694                 cnt = pCs->length;
 695
 696                 // If this command would put us over the maximum block size or
 697                 // if the last command had to be at the end of a block, we end
 698                 // the existing block here and start a new one.
 699                 if ((blocksize + cnt > maxBlock) || lastended) {
 700
 701                         ip2trace (CHANN, ITRC_QUEUE, 5, 0 );
 702
 703                         PTYPE_OF(pInsert) = type;
 704                         CHANNEL_OF(pInsert) = channel;
 705                         // count here does not include the header
 706                         CMD_COUNT_OF(pInsert) = blocksize - sizeof(i2CmdHeader);
 707                         stuffIndex += blocksize;
 708                         if(stuffIndex >= maxBuff) {
 709                                 stuffIndex = 0;
 710                                 pInsert = pBuf;
 711                         }
 712                         pInsert = &pBuf[stuffIndex];  // Pointer to start of next pkt
 713                         pDest = CMD_OF(pInsert);
 714                         blocksize = sizeof(i2CmdHeader);
 715                 }
 716                 // Now we know there is room for this one in the current block
 717
 718                 blocksize += cnt;       // Total bytes in this command
 719                 pSource = pCs->cmd;     // Copy the command into the buffer
 720                 while (cnt--) {
 721                         *pDest++ = *pSource++;
 722                 }
 723                 // If this command had to end a block, then we will make sure to account
 724                 // for it should there be any more blocks.
 725                 lastended = pCs->flags & END;
 726         }       // end for
 727         // Clean up the final block by writing header, etc
 728
 729         PTYPE_OF(pInsert) = type;
 730         CHANNEL_OF(pInsert) = channel;
 731         // count here does not include the header
 732         CMD_COUNT_OF(pInsert) = blocksize - sizeof(i2CmdHeader);
 733         stuffIndex += blocksize;
 734         if(stuffIndex >= maxBuff) {
 735                 stuffIndex = 0;
 736                 pInsert = pBuf;
 737         }
 738         // Updates the index, and post the need for service. When adding these to
 739         // the queue of channels, we turn off the interrupt while doing so,
 740         // because at interrupt level we might want to push a channel back to the
 741         // end of the queue.
 742         switch(type)
 743         {
 744         case PTYPE_INLINE:
 745                 pCh->Obuf_stuff = stuffIndex;  // Store buffer pointer
 746                 WRITE_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags);
 747
 748                 pB->debugInlineQueued++;
 749                 // Add the channel pointer to list of channels needing service (first
 750                 // come...), if it's not already there.
 751                 i2QueueNeeds(pB, pCh, NEED_INLINE);
 752                 break;
 753
 754         case PTYPE_BYPASS:
 755                 pCh->Cbuf_stuff = stuffIndex;  // Store buffer pointer
 756                 WRITE_UNLOCK_IRQRESTORE(&pCh->Cbuf_spinlock,flags);
 757
 758                 pB->debugBypassQueued++;
 759                 // Add the channel pointer to list of channels needing service (first
 760                 // come...), if it's not already there.
 761                 i2QueueNeeds(pB, pCh, NEED_BYPASS);
 762                 break;
 763         }
 764
 765         ip2trace (CHANN, ITRC_QUEUE, ITRC_RETURN, 1, nCommands );
 766
 767         return nCommands; // Good status: number of commands sent
 768 }
 769
 770 //******************************************************************************
 771 // Function:   i2GetStatus(pCh,resetBits)
 772 // Parameters: Pointer to a channel structure
 773 //             Bit map of status bits to clear
 774 // Returns:    Bit map of current status bits
 775 //
 776 // Description:
 777 // Returns the state of data set signals, and whether a break has been received,
 778 // (see i2lib.h for bit-mapped result). resetBits is a bit-map of any status
 779 // bits to be cleared: I2_BRK, I2_PAR, I2_FRA, I2_OVR,... These are cleared
 780 // AFTER the condition is passed. If pCh does not point to a valid channel,
 781 // returns -1 (which would be impossible otherwise.
 782 //******************************************************************************
 783 static int
 784 i2GetStatus(i2ChanStrPtr pCh, int resetBits)
 785 {
 786         unsigned short status;
 787         i2eBordStrPtr pB;
 788
 789         ip2trace (CHANN, ITRC_STATUS, ITRC_ENTER, 2, pCh->dataSetIn, resetBits );
 790
 791         // Make sure the channel exists, otherwise do nothing */
 792         if ( !i2Validate ( pCh ) )
 793                 return -1;
 794
 795         pB = pCh->pMyBord;
 796
 797         status = pCh->dataSetIn;
 798
 799         // Clear any specified error bits: but note that only actual error bits can
 800         // be cleared, regardless of the value passed.
 801         if (resetBits)
 802         {
 803                 pCh->dataSetIn &= ~(resetBits & (I2_BRK | I2_PAR | I2_FRA | I2_OVR));
 804                 pCh->dataSetIn &= ~(I2_DDCD | I2_DCTS | I2_DDSR | I2_DRI);
 805         }
 806
 807         ip2trace (CHANN, ITRC_STATUS, ITRC_RETURN, 1, pCh->dataSetIn );
 808
 809         return status;
 810 }
 811
 812 //******************************************************************************
 813 // Function:   i2Input(pChpDest,count)
 814 // Parameters: Pointer to a channel structure
 815 //             Pointer to data buffer
 816 //             Number of bytes to read
 817 // Returns:    Number of bytes read, or -1 for error
 818 //
 819 // Description:
 820 // Strips data from the input buffer and writes it to pDest. If there is a
 821 // collosal blunder, (invalid structure pointers or the like), returns -1.
 822 // Otherwise, returns the number of bytes read.
 823 //******************************************************************************
 824 static int
 825 i2Input(i2ChanStrPtr pCh)
 826 {
 827         int amountToMove;
 828         unsigned short stripIndex;
 829         int count;
 830         unsigned long flags = 0;
 831
 832         ip2trace (CHANN, ITRC_INPUT, ITRC_ENTER, 0);
 833
 834         // Ensure channel structure seems real
 835         if ( !i2Validate( pCh ) ) {
 836                 count = -1;
 837                 goto i2Input_exit;
 838         }
 839         WRITE_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags);
 840
 841         // initialize some accelerators and private copies
 842         stripIndex = pCh->Ibuf_strip;
 843
 844         count = pCh->Ibuf_stuff - stripIndex;
 845
 846         // If buffer is empty or requested data count was 0, (trivial case) return
 847         // without any further thought.
 848         if ( count == 0 ) {
 849                 WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
 850                 goto i2Input_exit;
 851         }
 852         // Adjust for buffer wrap
 853         if ( count < 0 ) {
 854                 count += IBUF_SIZE;
 855         }
 856         // Don't give more than can be taken by the line discipline
 857         amountToMove = pCh->pTTY->receive_room;
 858         if (count > amountToMove) {
 859                 count = amountToMove;
 860         }
 861         // How much could we copy without a wrap?
 862         amountToMove = IBUF_SIZE - stripIndex;
 863
 864         if (amountToMove > count) {
 865                 amountToMove = count;
 866         }
 867         // Move the first block
 868         pCh->pTTY->ldisc.receive_buf( pCh->pTTY,
 869                  &(pCh->Ibuf[stripIndex]), NULL, amountToMove );
 870         // If we needed to wrap, do the second data move
 871         if (count > amountToMove) {
 872                 pCh->pTTY->ldisc.receive_buf( pCh->pTTY,
 873                  pCh->Ibuf, NULL, count - amountToMove );
 874         }
 875         // Bump and wrap the stripIndex all at once by the amount of data read. This
 876         // method is good regardless of whether the data was in one or two pieces.
 877         stripIndex += count;
 878         if (stripIndex >= IBUF_SIZE) {
 879                 stripIndex -= IBUF_SIZE;
 880         }
 881         pCh->Ibuf_strip = stripIndex;
 882
 883         // Update our flow control information and possibly queue ourselves to send
 884         // it, depending on how much data has been stripped since the last time a
 885         // packet was sent.
 886         pCh->infl.asof += count;
 887
 888         if ((pCh->sinceLastFlow += count) >= pCh->whenSendFlow) {
 889                 pCh->sinceLastFlow -= pCh->whenSendFlow;
 890                 WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
 891                 i2QueueNeeds(pCh->pMyBord, pCh, NEED_FLOW);
 892         } else {
 893                 WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
 894         }
 895
 896 i2Input_exit:
 897
 898         ip2trace (CHANN, ITRC_INPUT, ITRC_RETURN, 1, count);
 899
 900         return count;
 901 }
 902
 903 //******************************************************************************
 904 // Function:   i2InputFlush(pCh)
 905 // Parameters: Pointer to a channel structure
 906 // Returns:    Number of bytes stripped, or -1 for error
 907 //
 908 // Description:
 909 // Strips any data from the input buffer. If there is a collosal blunder,
 910 // (invalid structure pointers or the like), returns -1. Otherwise, returns the
 911 // number of bytes stripped.
 912 //******************************************************************************
 913 static int
 914 i2InputFlush(i2ChanStrPtr pCh)
 915 {
 916         int count;
 917         unsigned long flags;
 918
 919         // Ensure channel structure seems real
 920         if ( !i2Validate ( pCh ) )
 921                 return -1;
 922
 923         ip2trace (CHANN, ITRC_INPUT, 10, 0);
 924
 925         WRITE_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags);
 926         count = pCh->Ibuf_stuff - pCh->Ibuf_strip;
 927
 928         // Adjust for buffer wrap
 929         if (count < 0) {
 930                 count += IBUF_SIZE;
 931         }
 932
 933         // Expedient way to zero out the buffer
 934         pCh->Ibuf_strip = pCh->Ibuf_stuff;
 935
 936
 937         // Update our flow control information and possibly queue ourselves to send
 938         // it, depending on how much data has been stripped since the last time a
 939         // packet was sent.
 940
 941         pCh->infl.asof += count;
 942
 943         if ( (pCh->sinceLastFlow += count) >= pCh->whenSendFlow )
 944         {
 945                 pCh->sinceLastFlow -= pCh->whenSendFlow;
 946                 WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
 947                 i2QueueNeeds(pCh->pMyBord, pCh, NEED_FLOW);
 948         } else {
 949                 WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
 950         }
 951
 952         ip2trace (CHANN, ITRC_INPUT, 19, 1, count);
 953
 954         return count;
 955 }
 956
 957 //******************************************************************************
 958 // Function:   i2InputAvailable(pCh)
 959 // Parameters: Pointer to a channel structure
 960 // Returns:    Number of bytes available, or -1 for error
 961 //
 962 // Description:
 963 // If there is a collosal blunder, (invalid structure pointers or the like),
 964 // returns -1. Otherwise, returns the number of bytes stripped. Otherwise,
 965 // returns the number of bytes available in the buffer.
 966 //******************************************************************************
 967 #if 0
 968 static int
 969 i2InputAvailable(i2ChanStrPtr pCh)
 970 {
 971         int count;
 972
 973         // Ensure channel structure seems real
 974         if ( !i2Validate ( pCh ) ) return -1;
 975
 976
 977         // initialize some accelerators and private copies
 978         READ_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags);
 979         count = pCh->Ibuf_stuff - pCh->Ibuf_strip;
 980         READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
 981
 982         // Adjust for buffer wrap
 983         if (count < 0)
 984         {
 985                 count += IBUF_SIZE;
 986         }
 987
 988         return count;
 989 }
 990 #endif
 991
 992 //******************************************************************************
 993 // Function:   i2Output(pCh, pSource, count)
 994 // Parameters: Pointer to channel structure
 995 //             Pointer to source data
 996 //             Number of bytes to send
 997 // Returns:    Number of bytes sent, or -1 for error
 998 //
 999 // Description:
1000 // Queues the data at pSource to be sent as data packets to the board. If there
1001 // is a collosal blunder, (invalid structure pointers or the like), returns -1.
1002 // Otherwise, returns the number of bytes written. What if there is not enough
1003 // room for all the data? If pCh->channelOptions & CO_NBLOCK_WRITE is set, then
1004 // we transfer as many characters as we can now, then return. If this bit is
1005 // clear (default), routine will spin along until all the data is buffered.
1006 // Should this occur, the 1-ms delay routine is called while waiting to avoid
1007 // applications that one cannot break out of.
1008 //******************************************************************************
1009 static int
1010 i2Output(i2ChanStrPtr pCh, const char *pSource, int count)
1011 {
1012         i2eBordStrPtr pB;
1013         unsigned char *pInsert;
1014         int amountToMove;
1015         int countOriginal = count;
1016         unsigned short channel;
1017         unsigned short stuffIndex;
1018         unsigned long flags;
1019         int rc = 0;
1020
1021         int bailout = 10;
1022
1023         ip2trace (CHANN, ITRC_OUTPUT, ITRC_ENTER, 2, count, 0 );
1024
1025         // Ensure channel structure seems real
1026         if ( !i2Validate ( pCh ) )
1027                 return -1;
1028
1029         // initialize some accelerators and private copies
1030         pB = pCh->pMyBord;
1031         channel = pCh->infl.hd.i2sChannel;
1032
1033         // If the board has gone fatal, return bad, and also hit the trap routine if
1034         // it exists.
1035         if (pB->i2eFatal) {
1036                 if (pB->i2eFatalTrap) {
1037                         (*(pB)->i2eFatalTrap)(pB);
1038                 }
1039                 return -1;
1040         }
1041         // Proceed as though we would do everything
1042         while ( count > 0 ) {
1043
1044                 // How much room in output buffer is there?
1045                 READ_LOCK_IRQSAVE(&pCh->Obuf_spinlock,flags);
1046                 amountToMove = pCh->Obuf_strip - pCh->Obuf_stuff - 1;
1047                 READ_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags);
1048                 if (amountToMove < 0) {
1049                         amountToMove += OBUF_SIZE;
1050                 }
1051                 // Subtract off the headers size and see how much room there is for real
1052                 // data. If this is negative, we will discover later.
1053                 amountToMove -= sizeof (i2DataHeader);
1054
1055                 // Don't move more (now) than can go in a single packet
1056                 if ( amountToMove > (int)(MAX_OBUF_BLOCK - sizeof(i2DataHeader)) ) {
1057                         amountToMove = MAX_OBUF_BLOCK - sizeof(i2DataHeader);
1058                 }
1059                 // Don't move more than the count we were given
1060                 if (amountToMove > count) {
1061                         amountToMove = count;
1062                 }
1063                 // Now we know how much we must move: NB because the ring buffers have
1064                 // an overflow area at the end, we needn't worry about wrapping in the
1065                 // middle of a packet.
1066
1067 // Small WINDOW here with no LOCK but I can't call Flush with LOCK
1068 // We would be flushing (or ending flush) anyway
1069
1070                 ip2trace (CHANN, ITRC_OUTPUT, 10, 1, amountToMove );
1071
1072                 if ( !(pCh->flush_flags && i2RetryFlushOutput(pCh) )
1073                                 && amountToMove > 0 )
1074                 {
1075                         WRITE_LOCK_IRQSAVE(&pCh->Obuf_spinlock,flags);
1076                         stuffIndex = pCh->Obuf_stuff;
1077
1078                         // Had room to move some data: don't know whether the block size,
1079                         // buffer space, or what was the limiting factor...
1080                         pInsert = &(pCh->Obuf[stuffIndex]);
1081
1082                         // Set up the header
1083                         CHANNEL_OF(pInsert)     = channel;
1084                         PTYPE_OF(pInsert)       = PTYPE_DATA;
1085                         TAG_OF(pInsert)         = 0;
1086                         ID_OF(pInsert)          = ID_ORDINARY_DATA;
1087                         DATA_COUNT_OF(pInsert)  = amountToMove;
1088
1089                         // Move the data
1090                         memcpy( (char*)(DATA_OF(pInsert)), pSource, amountToMove );
1091                         // Adjust pointers and indices
1092                         pSource                                 += amountToMove;
1093                         pCh->Obuf_char_count    += amountToMove;
1094                         stuffIndex                              += amountToMove + sizeof(i2DataHeader);
1095                         count                                   -= amountToMove;
1096
1097                         if (stuffIndex >= OBUF_SIZE) {
1098                                 stuffIndex = 0;
1099                         }
1100                         pCh->Obuf_stuff = stuffIndex;
1101
1102                         WRITE_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags);
1103
1104                         ip2trace (CHANN, ITRC_OUTPUT, 13, 1, stuffIndex );
1105
1106                 } else {
1107
1108                         // Cannot move data
1109                         // becuz we need to stuff a flush
1110                         // or amount to move is <= 0
1111
1112                         ip2trace(CHANN, ITRC_OUTPUT, 14, 3,
1113                                 amountToMove,  pB->i2eFifoRemains,
1114                                 pB->i2eWaitingForEmptyFifo );
1115
1116                         // Put this channel back on queue
1117                         // this ultimatly gets more data or wakes write output
1118                         i2QueueNeeds(pB, pCh, NEED_INLINE);
1119
1120                         if ( pB->i2eWaitingForEmptyFifo ) {
1121
1122                                 ip2trace (CHANN, ITRC_OUTPUT, 16, 0 );
1123
1124                                 // or schedule
1125                                 if (!in_interrupt()) {
1126
1127                                         ip2trace (CHANN, ITRC_OUTPUT, 61, 0 );
1128
1129                                         schedule_timeout_interruptible(2);
1130                                         if (signal_pending(current)) {
1131                                                 break;
1132                                         }
1133                                         continue;
1134                                 } else {
1135
1136                                         ip2trace (CHANN, ITRC_OUTPUT, 62, 0 );
1137
1138                                         // let interrupt in = WAS restore_flags()
1139                                         // We hold no lock nor is irq off anymore???
1140
1141                                         break;
1142                                 }
1143                                 break;   // from while(count)
1144                         }
1145                         else if ( pB->i2eFifoRemains < 32 && !pB->i2eTxMailEmpty ( pB ) )
1146                         {
1147                                 ip2trace (CHANN, ITRC_OUTPUT, 19, 2,
1148                                         pB->i2eFifoRemains,
1149                                         pB->i2eTxMailEmpty );
1150
1151                                 break;   // from while(count)
1152                         } else if ( pCh->channelNeeds & NEED_CREDIT ) {
1153
1154                                 ip2trace (CHANN, ITRC_OUTPUT, 22, 0 );
1155
1156                                 break;   // from while(count)
1157                         } else if ( --bailout) {
1158
1159                                 // Try to throw more things (maybe not us) in the fifo if we're
1160                                 // not already waiting for it.
1161
1162                                 ip2trace (CHANN, ITRC_OUTPUT, 20, 0 );
1163
1164                                 serviceOutgoingFifo(pB);
1165                                 //break;  CONTINUE;
1166                         } else {
1167                                 ip2trace (CHANN, ITRC_OUTPUT, 21, 3,
1168                                         pB->i2eFifoRemains,
1169                                         pB->i2eOutMailWaiting,
1170                                         pB->i2eWaitingForEmptyFifo );
1171
1172                                 break;   // from while(count)
1173                         }
1174                 }
1175         } // End of while(count)
1176
1177         i2QueueNeeds(pB, pCh, NEED_INLINE);
1178
1179         // We drop through either when the count expires, or when there is some
1180         // count left, but there was a non-blocking write.
1181         if (countOriginal > count) {
1182
1183                 ip2trace (CHANN, ITRC_OUTPUT, 17, 2, countOriginal, count );
1184
1185                 serviceOutgoingFifo( pB );
1186         }
1187
1188         ip2trace (CHANN, ITRC_OUTPUT, ITRC_RETURN, 2, countOriginal, count );
1189
1190         return countOriginal - count;
1191 }
1192
1193 //******************************************************************************
1194 // Function:   i2FlushOutput(pCh)
1195 // Parameters: Pointer to a channel structure
1196 // Returns:    Nothing
1197 //
1198 // Description:
1199 // Sends bypass command to start flushing (waiting possibly forever until there
1200 // is room), then sends inline command to stop flushing output, (again waiting
1201 // possibly forever).
1202 //******************************************************************************
1203 static inline void
1204 i2FlushOutput(i2ChanStrPtr pCh)
1205 {
1206
1207         ip2trace (CHANN, ITRC_FLUSH, 1, 1, pCh->flush_flags );
1208
1209         if (pCh->flush_flags)
1210                 return;
1211
1212         if ( 1 != i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_STARTFL) ) {
1213                 pCh->flush_flags = STARTFL_FLAG;                // Failed - flag for later
1214
1215                 ip2trace (CHANN, ITRC_FLUSH, 2, 0 );
1216
1217         } else if ( 1 != i2QueueCommands(PTYPE_INLINE, pCh, 0, 1, CMD_STOPFL) ) {
1218                 pCh->flush_flags = STOPFL_FLAG;         // Failed - flag for later
1219
1220                 ip2trace (CHANN, ITRC_FLUSH, 3, 0 );
1221         }
1222 }
1223
1224 static int
1225 i2RetryFlushOutput(i2ChanStrPtr pCh)
1226 {
1227         int old_flags = pCh->flush_flags;
1228
1229         ip2trace (CHANN, ITRC_FLUSH, 14, 1, old_flags );
1230
1231         pCh->flush_flags = 0;   // Clear flag so we can avoid recursion
1232                                                                         // and queue the commands
1233
1234         if ( old_flags & STARTFL_FLAG ) {
1235                 if ( 1 == i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_STARTFL) ) {
1236                         old_flags = STOPFL_FLAG;        //Success - send stop flush
1237                 } else {
1238                         old_flags = STARTFL_FLAG;       //Failure - Flag for retry later
1239                 }
1240
1241                 ip2trace (CHANN, ITRC_FLUSH, 15, 1, old_flags );
1242
1243         }
1244         if ( old_flags & STOPFL_FLAG ) {
1245                 if (1 == i2QueueCommands(PTYPE_INLINE, pCh, 0, 1, CMD_STOPFL)) {
1246                         old_flags = 0;  // Success - clear flags
1247                 }
1248
1249                 ip2trace (CHANN, ITRC_FLUSH, 16, 1, old_flags );
1250         }
1251         pCh->flush_flags = old_flags;
1252
1253         ip2trace (CHANN, ITRC_FLUSH, 17, 1, old_flags );
1254
1255         return old_flags;
1256 }
1257
1258 //******************************************************************************
1259 // Function:   i2DrainOutput(pCh,timeout)
1260 // Parameters: Pointer to a channel structure
1261 //             Maximum period to wait
1262 // Returns:    ?
1263 //
1264 // Description:
1265 // Uses the bookmark request command to ask the board to send a bookmark back as
1266 // soon as all the data is completely sent.
1267 //******************************************************************************
1268 static void
1269 i2DrainWakeup(i2ChanStrPtr pCh)
1270 {
1271         ip2trace (CHANN, ITRC_DRAIN, 10, 1, pCh->BookmarkTimer.expires );
1272
1273         pCh->BookmarkTimer.expires = 0;
1274         wake_up_interruptible( &pCh->pBookmarkWait );
1275 }
1276
1277 static void
1278 i2DrainOutput(i2ChanStrPtr pCh, int timeout)
1279 {
1280         wait_queue_t wait;
1281         i2eBordStrPtr pB;
1282
1283         ip2trace (CHANN, ITRC_DRAIN, ITRC_ENTER, 1, pCh->BookmarkTimer.expires);
1284
1285         pB = pCh->pMyBord;
1286         // If the board has gone fatal, return bad,
1287         // and also hit the trap routine if it exists.
1288         if (pB->i2eFatal) {
1289                 if (pB->i2eFatalTrap) {
1290                         (*(pB)->i2eFatalTrap)(pB);
1291                 }
1292                 return;
1293         }
1294         if ((timeout > 0) && (pCh->BookmarkTimer.expires == 0 )) {
1295                 // One per customer (channel)
1296                 init_timer( &(pCh->BookmarkTimer) );
1297                 pCh->BookmarkTimer.expires  = jiffies + timeout;
1298                 pCh->BookmarkTimer.function = (void*)(unsigned long)i2DrainWakeup;
1299                 pCh->BookmarkTimer.data     = (unsigned long)pCh;
1300
1301                 ip2trace (CHANN, ITRC_DRAIN, 1, 1, pCh->BookmarkTimer.expires );
1302
1303                 add_timer( &(pCh->BookmarkTimer) );
1304         }
1305
1306         i2QueueCommands( PTYPE_INLINE, pCh, -1, 1, CMD_BMARK_REQ );
1307
1308         init_waitqueue_entry(&wait, current);
1309         add_wait_queue(&(pCh->pBookmarkWait), &wait);
1310         set_current_state( TASK_INTERRUPTIBLE );
1311
1312         serviceOutgoingFifo( pB );
1313
1314         schedule();     // Now we take our interruptible sleep on
1315
1316         // Clean up the queue
1317         set_current_state( TASK_RUNNING );
1318         remove_wait_queue(&(pCh->pBookmarkWait), &wait);
1319
1320         // if expires == 0 then timer poped, then do not need to del_timer
1321         if ((timeout > 0) && pCh->BookmarkTimer.expires &&
1322                              time_before(jiffies, pCh->BookmarkTimer.expires)) {
1323                 del_timer( &(pCh->BookmarkTimer) );
1324                 pCh->BookmarkTimer.expires = 0;
1325
1326                 ip2trace (CHANN, ITRC_DRAIN, 3, 1, pCh->BookmarkTimer.expires );
1327
1328         }
1329         ip2trace (CHANN, ITRC_DRAIN, ITRC_RETURN, 1, pCh->BookmarkTimer.expires );
1330         return;
1331 }
1332
1333 //******************************************************************************
1334 // Function:   i2OutputFree(pCh)
1335 // Parameters: Pointer to a channel structure
1336 // Returns:    Space in output buffer
1337 //
1338 // Description:
1339 // Returns -1 if very gross error. Otherwise returns the amount of bytes still
1340 // free in the output buffer.
1341 //******************************************************************************
1342 static int
1343 i2OutputFree(i2ChanStrPtr pCh)
1344 {
1345         int amountToMove;
1346         unsigned long flags;
1347
1348         // Ensure channel structure seems real
1349         if ( !i2Validate ( pCh ) ) {
1350                 return -1;
1351         }
1352         READ_LOCK_IRQSAVE(&pCh->Obuf_spinlock,flags);
1353         amountToMove = pCh->Obuf_strip - pCh->Obuf_stuff - 1;
1354         READ_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags);
1355
1356         if (amountToMove < 0) {
1357                 amountToMove += OBUF_SIZE;
1358         }
1359         // If this is negative, we will discover later
1360         amountToMove -= sizeof(i2DataHeader);
1361
1362         return (amountToMove < 0) ? 0 : amountToMove;
1363 }
1364 static void
1365
1366 ip2_owake( PTTY tp)
1367 {
1368         i2ChanStrPtr  pCh;
1369
1370         if (tp == NULL) return;
1371
1372         pCh = tp->driver_data;
1373
1374         ip2trace (CHANN, ITRC_SICMD, 10, 2, tp->flags,
1375                         (1 << TTY_DO_WRITE_WAKEUP) );
1376
1377         wake_up_interruptible ( &tp->write_wait );
1378         if ( ( tp->flags & (1 << TTY_DO_WRITE_WAKEUP) )
1379           && tp->ldisc.write_wakeup )
1380         {
1381                 (tp->ldisc.write_wakeup) ( tp );
1382
1383                 ip2trace (CHANN, ITRC_SICMD, 11, 0 );
1384
1385         }
1386 }
1387
1388 static inline void
1389 set_baud_params(i2eBordStrPtr pB)
1390 {
1391         int i,j;
1392         i2ChanStrPtr  *pCh;
1393
1394         pCh = (i2ChanStrPtr *) pB->i2eChannelPtr;
1395
1396         for (i = 0; i < ABS_MAX_BOXES; i++) {
1397                 if (pB->channelBtypes.bid_value[i]) {
1398                         if (BID_HAS_654(pB->channelBtypes.bid_value[i])) {
1399                                 for (j = 0; j < ABS_BIGGEST_BOX; j++) {
1400                                         if (pCh[i*16+j] == NULL)
1401                                                 break;
1402                                         (pCh[i*16+j])->BaudBase    = 921600;    // MAX for ST654
1403                                         (pCh[i*16+j])->BaudDivisor = 96;
1404                                 }
1405                         } else {        // has cirrus cd1400
1406                                 for (j = 0; j < ABS_BIGGEST_BOX; j++) {
1407                                         if (pCh[i*16+j] == NULL)
1408                                                 break;
1409                                         (pCh[i*16+j])->BaudBase    = 115200;    // MAX for CD1400
1410                                         (pCh[i*16+j])->BaudDivisor = 12;
1411                                 }
1412                         }
1413                 }
1414         }
1415 }
1416
1417 //******************************************************************************
1418 // Function:   i2StripFifo(pB)
1419 // Parameters: Pointer to a board structure
1420 // Returns:    ?
1421 //
1422 // Description:
1423 // Strips all the available data from the incoming FIFO, identifies the type of
1424 // packet, and either buffers the data or does what needs to be done.
1425 //
1426 // Note there is no overflow checking here: if the board sends more data than it
1427 // ought to, we will not detect it here, but blindly overflow...
1428 //******************************************************************************
1429
1430 // A buffer for reading in blocks for unknown channels
1431 static unsigned char junkBuffer[IBUF_SIZE];
1432
1433 // A buffer to read in a status packet. Because of the size of the count field
1434 // for these things, the maximum packet size must be less than MAX_CMD_PACK_SIZE
1435 static unsigned char cmdBuffer[MAX_CMD_PACK_SIZE + 4];
1436
1437 // This table changes the bit order from MSR order given by STAT_MODEM packet to
1438 // status bits used in our library.
1439 static char xlatDss[16] = {
1440 0      | 0     | 0      | 0      ,
1441 0      | 0     | 0      | I2_CTS ,
1442 0      | 0     | I2_DSR | 0      ,
1443 0      | 0     | I2_DSR | I2_CTS ,
1444 0      | I2_RI | 0      | 0      ,
1445 0      | I2_RI | 0      | I2_CTS ,
1446 0      | I2_RI | I2_DSR | 0      ,
1447 0      | I2_RI | I2_DSR | I2_CTS ,
1448 I2_DCD | 0     | 0      | 0      ,
1449 I2_DCD | 0     | 0      | I2_CTS ,
1450 I2_DCD | 0     | I2_DSR | 0      ,
1451 I2_DCD | 0     | I2_DSR | I2_CTS ,
1452 I2_DCD | I2_RI | 0      | 0      ,
1453 I2_DCD | I2_RI | 0      | I2_CTS ,
1454 I2_DCD | I2_RI | I2_DSR | 0      ,
1455 I2_DCD | I2_RI | I2_DSR | I2_CTS };
1456
1457 static inline void
1458 i2StripFifo(i2eBordStrPtr pB)
1459 {
1460         i2ChanStrPtr pCh;
1461         int channel;
1462         int count;
1463         unsigned short stuffIndex;
1464         int amountToRead;
1465         unsigned char *pc, *pcLimit;
1466         unsigned char uc;
1467         unsigned char dss_change;
1468         unsigned long bflags,cflags;
1469
1470 //      ip2trace (ITRC_NO_PORT, ITRC_SFIFO, ITRC_ENTER, 0 );
1471
1472         while (HAS_INPUT(pB)) {
1473 //              ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 2, 0 );
1474
1475                 // Process packet from fifo a one atomic unit
1476                 WRITE_LOCK_IRQSAVE(&pB->read_fifo_spinlock,bflags);
1477
1478                 // The first word (or two bytes) will have channel number and type of
1479                 // packet, possibly other information
1480                 pB->i2eLeadoffWord[0] = iiReadWord(pB);
1481
1482                 switch(PTYPE_OF(pB->i2eLeadoffWord))
1483                 {
1484                 case PTYPE_DATA:
1485                         pB->got_input = 1;
1486
1487 //                      ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 3, 0 );
1488
1489                         channel = CHANNEL_OF(pB->i2eLeadoffWord); /* Store channel */
1490                         count = iiReadWord(pB);          /* Count is in the next word */
1491
1492 // NEW: Check the count for sanity! Should the hardware fail, our death
1493 // is more pleasant. While an oversize channel is acceptable (just more
1494 // than the driver supports), an over-length count clearly means we are
1495 // sick!
1496                         if ( ((unsigned int)count) > IBUF_SIZE ) {
1497                                 pB->i2eFatal = 2;
1498                                 WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock,bflags);
1499                                 return;     /* Bail out ASAP */
1500                         }
1501                         // Channel is illegally big ?
1502                         if ((channel >= pB->i2eChannelCnt) ||
1503                                 (NULL==(pCh = ((i2ChanStrPtr*)pB->i2eChannelPtr)[channel])))
1504                         {
1505                                 iiReadBuf(pB, junkBuffer, count);
1506                                 WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock,bflags);
1507                                 break;         /* From switch: ready for next packet */
1508                         }
1509
1510                         // Channel should be valid, then
1511
1512                         // If this is a hot-key, merely post its receipt for now. These are
1513                         // always supposed to be 1-byte packets, so we won't even check the
1514                         // count. Also we will post an acknowledgement to the board so that
1515                         // more data can be forthcoming. Note that we are not trying to use
1516                         // these sequences in this driver, merely to robustly ignore them.
1517                         if(ID_OF(pB->i2eLeadoffWord) == ID_HOT_KEY)
1518                         {
1519                                 pCh->hotKeyIn = iiReadWord(pB) & 0xff;
1520                                 WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock,bflags);
1521                                 i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_HOTACK);
1522                                 break;   /* From the switch: ready for next packet */
1523                         }
1524
1525                         // Normal data! We crudely assume there is room for the data in our
1526                         // buffer because the board wouldn't have exceeded his credit limit.
1527                         WRITE_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,cflags);
1528                                                                                                         // We have 2 locks now
1529                         stuffIndex = pCh->Ibuf_stuff;
1530                         amountToRead = IBUF_SIZE - stuffIndex;
1531                         if (amountToRead > count)
1532                                 amountToRead = count;
1533
1534                         // stuffIndex would have been already adjusted so there would
1535                         // always be room for at least one, and count is always at least
1536                         // one.
1537
1538                         iiReadBuf(pB, &(pCh->Ibuf[stuffIndex]), amountToRead);
1539                         pCh->icount.rx += amountToRead;
1540
1541                         // Update the stuffIndex by the amount of data moved. Note we could
1542                         // never ask for more data than would just fit. However, we might
1543                         // have read in one more byte than we wanted because the read
1544                         // rounds up to even bytes. If this byte is on the end of the
1545                         // packet, and is padding, we ignore it. If the byte is part of
1546                         // the actual data, we need to move it.
1547
1548                         stuffIndex += amountToRead;
1549
1550                         if (stuffIndex >= IBUF_SIZE) {
1551                                 if ((amountToRead & 1) && (count > amountToRead)) {
1552                                         pCh->Ibuf[0] = pCh->Ibuf[IBUF_SIZE];
1553                                         amountToRead++;
1554                                         stuffIndex = 1;
1555                                 } else {
1556                                         stuffIndex = 0;
1557                                 }
1558                         }
1559
1560                         // If there is anything left over, read it as well
1561                         if (count > amountToRead) {
1562                                 amountToRead = count - amountToRead;
1563                                 iiReadBuf(pB, &(pCh->Ibuf[stuffIndex]), amountToRead);
1564                                 pCh->icount.rx += amountToRead;
1565                                 stuffIndex += amountToRead;
1566                         }
1567
1568                         // Update stuff index
1569                         pCh->Ibuf_stuff = stuffIndex;
1570                         WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,cflags);
1571                         WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock,bflags);
1572
1573 #ifdef USE_IQ
1574                         schedule_work(&pCh->tqueue_input);
1575 #else
1576                         do_input(pCh);
1577 #endif
1578
1579                         // Note we do not need to maintain any flow-control credits at this
1580                         // time:  if we were to increment .asof and decrement .room, there
1581                         // would be no net effect. Instead, when we strip data, we will
1582                         // increment .asof and leave .room unchanged.
1583
1584                         break;   // From switch: ready for next packet
1585
1586                 case PTYPE_STATUS:
1587                         ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 4, 0 );
1588
1589                         count = CMD_COUNT_OF(pB->i2eLeadoffWord);
1590
1591                         iiReadBuf(pB, cmdBuffer, count);
1592                         // We can release early with buffer grab
1593                         WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock,bflags);
1594
1595                         pc = cmdBuffer;
1596                         pcLimit = &(cmdBuffer[count]);
1597
1598                         while (pc < pcLimit) {
1599                                 channel = *pc++;
1600
1601                                 ip2trace (channel, ITRC_SFIFO, 7, 2, channel, *pc );
1602
1603                                 /* check for valid channel */
1604                                 if (channel < pB->i2eChannelCnt
1605                                          &&
1606                                          (pCh = (((i2ChanStrPtr*)pB->i2eChannelPtr)[channel])) != NULL
1607                                         )
1608                                 {
1609                                         dss_change = 0;
1610
1611                                         switch (uc = *pc++)
1612                                         {
1613                                         /* Breaks and modem signals are easy: just update status */
1614                                         case STAT_CTS_UP:
1615                                                 if ( !(pCh->dataSetIn & I2_CTS) )
1616                                                 {
1617                                                         pCh->dataSetIn |= I2_DCTS;
1618                                                         pCh->icount.cts++;
1619                                                         dss_change = 1;
1620                                                 }
1621                                                 pCh->dataSetIn |= I2_CTS;
1622                                                 break;
1623
1624                                         case STAT_CTS_DN:
1625                                                 if ( pCh->dataSetIn & I2_CTS )
1626                                                 {
1627                                                         pCh->dataSetIn |= I2_DCTS;
1628                                                         pCh->icount.cts++;
1629                                                         dss_change = 1;
1630                                                 }
1631                                                 pCh->dataSetIn &= ~I2_CTS;
1632                                                 break;
1633
1634                                         case STAT_DCD_UP:
1635                                                 ip2trace (channel, ITRC_MODEM, 1, 1, pCh->dataSetIn );
1636
1637                                                 if ( !(pCh->dataSetIn & I2_DCD) )
1638                                                 {
1639                                                         ip2trace (CHANN, ITRC_MODEM, 2, 0 );
1640                                                         pCh->dataSetIn |= I2_DDCD;
1641                                                         pCh->icount.dcd++;
1642                                                         dss_change = 1;
1643                                                 }
1644                                                 pCh->dataSetIn |= I2_DCD;
1645
1646                                                 ip2trace (channel, ITRC_MODEM, 3, 1, pCh->dataSetIn );
1647                                                 break;
1648
1649                                         case STAT_DCD_DN:
1650                                                 ip2trace (channel, ITRC_MODEM, 4, 1, pCh->dataSetIn );
1651                                                 if ( pCh->dataSetIn & I2_DCD )
1652                                                 {
1653                                                         ip2trace (channel, ITRC_MODEM, 5, 0 );
1654                                                         pCh->dataSetIn |= I2_DDCD;
1655                                                         pCh->icount.dcd++;
1656                                                         dss_change = 1;
1657                                                 }
1658                                                 pCh->dataSetIn &= ~I2_DCD;
1659
1660                                                 ip2trace (channel, ITRC_MODEM, 6, 1, pCh->dataSetIn );
1661                                                 break;
1662
1663                                         case STAT_DSR_UP:
1664                                                 if ( !(pCh->dataSetIn & I2_DSR) )
1665                                                 {
1666                                                         pCh->dataSetIn |= I2_DDSR;
1667                                                         pCh->icount.dsr++;
1668                                                         dss_change = 1;
1669                                                 }
1670                                                 pCh->dataSetIn |= I2_DSR;
1671                                                 break;
1672
1673                                         case STAT_DSR_DN:
1674                                                 if ( pCh->dataSetIn & I2_DSR )
1675                                                 {
1676                                                         pCh->dataSetIn |= I2_DDSR;
1677                                                         pCh->icount.dsr++;
1678                                                         dss_change = 1;
1679                                                 }
1680                                                 pCh->dataSetIn &= ~I2_DSR;
1681                                                 break;
1682
1683                                         case STAT_RI_UP:
1684                                                 if ( !(pCh->dataSetIn & I2_RI) )
1685                                                 {
1686                                                         pCh->dataSetIn |= I2_DRI;
1687                                                         pCh->icount.rng++;
1688                                                         dss_change = 1;
1689                                                 }
1690                                                 pCh->dataSetIn |= I2_RI ;
1691                                                 break;
1692
1693                                         case STAT_RI_DN:
1694                                                 // to be compat with serial.c
1695                                                 //if ( pCh->dataSetIn & I2_RI )
1696                                                 //{
1697                                                 //      pCh->dataSetIn |= I2_DRI;
1698                                                 //      pCh->icount.rng++;
1699                                                 //      dss_change = 1;
1700                                                 //}
1701                                                 pCh->dataSetIn &= ~I2_RI ;
1702                                                 break;
1703
1704                                         case STAT_BRK_DET:
1705                                                 pCh->dataSetIn |= I2_BRK;
1706                                                 pCh->icount.brk++;
1707                                                 dss_change = 1;
1708                                                 break;
1709
1710                                         // Bookmarks? one less request we're waiting for
1711                                         case STAT_BMARK:
1712                                                 pCh->bookMarks--;
1713                                                 if (pCh->bookMarks <= 0 ) {
1714                                                         pCh->bookMarks = 0;
1715                                                         wake_up_interruptible( &pCh->pBookmarkWait );
1716
1717                                                 ip2trace (channel, ITRC_DRAIN, 20, 1, pCh->BookmarkTimer.expires );
1718                                                 }
1719                                                 break;
1720
1721                                         // Flow control packets? Update the new credits, and if
1722                                         // someone was waiting for output, queue him up again.
1723                                         case STAT_FLOW:
1724                                                 pCh->outfl.room =
1725                                                         ((flowStatPtr)pc)->room -
1726                                                         (pCh->outfl.asof - ((flowStatPtr)pc)->asof);
1727
1728                                                 ip2trace (channel, ITRC_STFLW, 1, 1, pCh->outfl.room );
1729
1730                                                 if (pCh->channelNeeds & NEED_CREDIT)
1731                                                 {
1732                                                         ip2trace (channel, ITRC_STFLW, 2, 1, pCh->channelNeeds);
1733
1734                                                         pCh->channelNeeds &= ~NEED_CREDIT;
1735                                                         i2QueueNeeds(pB, pCh, NEED_INLINE);
1736                                                         if ( pCh->pTTY )
1737                                                                 ip2_owake(pCh->pTTY);
1738                                                 }
1739
1740                                                 ip2trace (channel, ITRC_STFLW, 3, 1, pCh->channelNeeds);
1741
1742                                                 pc += sizeof(flowStat);
1743                                                 break;
1744
1745                                         /* Special packets: */
1746                                         /* Just copy the information into the channel structure */
1747
1748                                         case STAT_STATUS:
1749
1750                                                 pCh->channelStatus = *((debugStatPtr)pc);
1751                                                 pc += sizeof(debugStat);
1752                                                 break;
1753
1754                                         case STAT_TXCNT:
1755
1756                                                 pCh->channelTcount = *((cntStatPtr)pc);
1757                                                 pc += sizeof(cntStat);
1758                                                 break;
1759
1760                                         case STAT_RXCNT:
1761
1762                                                 pCh->channelRcount = *((cntStatPtr)pc);
1763                                                 pc += sizeof(cntStat);
1764                                                 break;
1765
1766                                         case STAT_BOXIDS:
1767                                                 pB->channelBtypes = *((bidStatPtr)pc);
1768                                                 pc += sizeof(bidStat);
1769                                                 set_baud_params(pB);
1770                                                 break;
1771
1772                                         case STAT_HWFAIL:
1773                                                 i2QueueCommands (PTYPE_INLINE, pCh, 0, 1, CMD_HW_TEST);
1774                                                 pCh->channelFail = *((failStatPtr)pc);
1775                                                 pc += sizeof(failStat);
1776                                                 break;
1777
1778                                         /* No explicit match? then
1779                                          * Might be an error packet...
1780                                          */
1781                                         default:
1782                                                 switch (uc & STAT_MOD_ERROR)
1783                                                 {
1784                                                 case STAT_ERROR:
1785                                                         if (uc & STAT_E_PARITY) {
1786                                                                 pCh->dataSetIn |= I2_PAR;
1787                                                                 pCh->icount.parity++;
1788                                                         }
1789                                                         if (uc & STAT_E_FRAMING){
1790                                                                 pCh->dataSetIn |= I2_FRA;
1791                                                                 pCh->icount.frame++;
1792                                                         }
1793                                                         if (uc & STAT_E_OVERRUN){
1794                                                                 pCh->dataSetIn |= I2_OVR;
1795                                                                 pCh->icount.overrun++;
1796                                                         }
1797                                                         break;
1798
1799                                                 case STAT_MODEM:
1800                                                         // the answer to DSS_NOW request (not change)
1801                                                         pCh->dataSetIn = (pCh->dataSetIn
1802                                                                 & ~(I2_RI | I2_CTS | I2_DCD | I2_DSR) )
1803                                                                 | xlatDss[uc & 0xf];
1804                                                         wake_up_interruptible ( &pCh->dss_now_wait );
1805                                                 default:
1806                                                         break;
1807                                                 }
1808                                         }  /* End of switch on status type */
1809                                         if (dss_change) {
1810 #ifdef USE_IQ
1811                                                 schedule_work(&pCh->tqueue_status);
1812 #else
1813                                                 do_status(pCh);
1814 #endif
1815                                         }
1816                                 }
1817                                 else  /* Or else, channel is invalid */
1818                                 {
1819                                         // Even though the channel is invalid, we must test the
1820                                         // status to see how much additional data it has (to be
1821                                         // skipped)
1822                                         switch (*pc++)
1823                                         {
1824                                         case STAT_FLOW:
1825                                                 pc += 4;    /* Skip the data */
1826                                                 break;
1827
1828                                         default:
1829                                                 break;
1830                                         }
1831                                 }
1832                         }  // End of while (there is still some status packet left)
1833                         break;
1834
1835                 default: // Neither packet? should be impossible
1836                         ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 5, 1,
1837                                 PTYPE_OF(pB->i2eLeadoffWord) );
1838
1839                         break;
1840                 }  // End of switch on type of packets
1841         }       //while(board HAS_INPUT)
1842
1843         ip2trace (ITRC_NO_PORT, ITRC_SFIFO, ITRC_RETURN, 0 );
1844
1845         // Send acknowledgement to the board even if there was no data!
1846         pB->i2eOutMailWaiting |= MB_IN_STRIPPED;
1847         return;
1848 }
1849
1850 //******************************************************************************
1851 // Function:   i2Write2Fifo(pB,address,count)
1852 // Parameters: Pointer to a board structure, source address, byte count
1853 // Returns:    bytes written
1854 //
1855 // Description:
1856 //  Writes count bytes to board io address(implied) from source
1857 //  Adjusts count, leaves reserve for next time around bypass cmds
1858 //******************************************************************************
1859 static int
1860 i2Write2Fifo(i2eBordStrPtr pB, unsigned char *source, int count,int reserve)
1861 {
1862         int rc = 0;
1863         unsigned long flags;
1864         WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags);
1865         if (!pB->i2eWaitingForEmptyFifo) {
1866                 if (pB->i2eFifoRemains > (count+reserve)) {
1867                         pB->i2eFifoRemains -= count;
1868                         iiWriteBuf(pB, source, count);
1869                         pB->i2eOutMailWaiting |= MB_OUT_STUFFED;
1870                         rc =  count;
1871                 }
1872         }
1873         WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags);
1874         return rc;
1875 }
1876 //******************************************************************************
1877 // Function:   i2StuffFifoBypass(pB)
1878 // Parameters: Pointer to a board structure
1879 // Returns:    Nothing
1880 //
1881 // Description:
1882 // Stuffs as many bypass commands into the fifo as possible. This is simpler
1883 // than stuffing data or inline commands to fifo, since we do not have
1884 // flow-control to deal with.
1885 //******************************************************************************
1886 static inline void
1887 i2StuffFifoBypass(i2eBordStrPtr pB)
1888 {
1889         i2ChanStrPtr pCh;
1890         unsigned char *pRemove;
1891         unsigned short stripIndex;
1892         unsigned short packetSize;
1893         unsigned short paddedSize;
1894         unsigned short notClogged = 1;
1895         unsigned long flags;
1896
1897         int bailout = 1000;
1898
1899         // Continue processing so long as there are entries, or there is room in the
1900         // fifo. Each entry represents a channel with something to do.
1901         while ( --bailout && notClogged &&
1902                         (NULL != (pCh = i2DeQueueNeeds(pB,NEED_BYPASS))))
1903         {
1904                 WRITE_LOCK_IRQSAVE(&pCh->Cbuf_spinlock,flags);
1905                 stripIndex = pCh->Cbuf_strip;
1906
1907                 // as long as there are packets for this channel...
1908
1909                 while (stripIndex != pCh->Cbuf_stuff) {
1910                         pRemove = &(pCh->Cbuf[stripIndex]);
1911                         packetSize = CMD_COUNT_OF(pRemove) + sizeof(i2CmdHeader);
1912                         paddedSize = ROUNDUP(packetSize);
1913
1914                         if (paddedSize > 0) {
1915                                 if ( 0 == i2Write2Fifo(pB, pRemove, paddedSize,0)) {
1916                                         notClogged = 0; /* fifo full */
1917                                         i2QueueNeeds(pB, pCh, NEED_BYPASS);     // Put back on queue
1918                                         break;   // Break from the channel
1919                                 }
1920                         }
1921 #ifdef DEBUG_FIFO
1922 WriteDBGBuf("BYPS", pRemove, paddedSize);
1923 #endif  /* DEBUG_FIFO */
1924                         pB->debugBypassCount++;
1925
1926                         pRemove += packetSize;
1927                         stripIndex += packetSize;
1928                         if (stripIndex >= CBUF_SIZE) {
1929                                 stripIndex = 0;
1930                                 pRemove = pCh->Cbuf;
1931                         }
1932                 }
1933                 // Done with this channel. Move to next, removing this one from
1934                 // the queue of channels if we cleaned it out (i.e., didn't get clogged.
1935                 pCh->Cbuf_strip = stripIndex;
1936                 WRITE_UNLOCK_IRQRESTORE(&pCh->Cbuf_spinlock,flags);
1937         }  // Either clogged or finished all the work
1938
1939 #ifdef IP2DEBUG_TRACE
1940         if ( !bailout ) {
1941                 ip2trace (ITRC_NO_PORT, ITRC_ERROR, 1, 0 );
1942         }
1943 #endif
1944 }
1945
1946 //******************************************************************************
1947 // Function:   i2StuffFifoFlow(pB)
1948 // Parameters: Pointer to a board structure
1949 // Returns:    Nothing
1950 //
1951 // Description:
1952 // Stuffs as many flow control packets into the fifo as possible. This is easier
1953 // even than doing normal bypass commands, because there is always at most one
1954 // packet, already assembled, for each channel.
1955 //******************************************************************************
1956 static inline void
1957 i2StuffFifoFlow(i2eBordStrPtr pB)
1958 {
1959         i2ChanStrPtr pCh;
1960         unsigned short paddedSize               = ROUNDUP(sizeof(flowIn));
1961
1962         ip2trace (ITRC_NO_PORT, ITRC_SFLOW, ITRC_ENTER, 2,
1963                 pB->i2eFifoRemains, paddedSize );
1964
1965         // Continue processing so long as there are entries, or there is room in the
1966         // fifo. Each entry represents a channel with something to do.
1967         while ( (NULL != (pCh = i2DeQueueNeeds(pB,NEED_FLOW)))) {
1968                 pB->debugFlowCount++;
1969
1970                 // NO Chan LOCK needed ???
1971                 if ( 0 == i2Write2Fifo(pB,(unsigned char *)&(pCh->infl),paddedSize,0)) {
1972                         break;
1973                 }
1974 #ifdef DEBUG_FIFO
1975                 WriteDBGBuf("FLOW",(unsigned char *) &(pCh->infl), paddedSize);
1976 #endif /* DEBUG_FIFO */
1977
1978         }  // Either clogged or finished all the work
1979
1980         ip2trace (ITRC_NO_PORT, ITRC_SFLOW, ITRC_RETURN, 0 );
1981 }
1982
1983 //******************************************************************************
1984 // Function:   i2StuffFifoInline(pB)
1985 // Parameters: Pointer to a board structure
1986 // Returns:    Nothing
1987 //
1988 // Description:
1989 // Stuffs as much data and inline commands into the fifo as possible. This is
1990 // the most complex fifo-stuffing operation, since there if now the channel
1991 // flow-control issue to deal with.
1992 //******************************************************************************
1993 static inline void
1994 i2StuffFifoInline(i2eBordStrPtr pB)
1995 {
1996         i2ChanStrPtr pCh;
1997         unsigned char *pRemove;
1998         unsigned short stripIndex;
1999         unsigned short packetSize;
2000         unsigned short paddedSize;
2001         unsigned short notClogged = 1;
2002         unsigned short flowsize;
2003         unsigned long flags;
2004
2005         int bailout  = 1000;
2006         int bailout2;
2007
2008         ip2trace (ITRC_NO_PORT, ITRC_SICMD, ITRC_ENTER, 3, pB->i2eFifoRemains,
2009                         pB->i2Dbuf_strip, pB->i2Dbuf_stuff );
2010
2011         // Continue processing so long as there are entries, or there is room in the
2012         // fifo. Each entry represents a channel with something to do.
2013         while ( --bailout && notClogged &&
2014                         (NULL != (pCh = i2DeQueueNeeds(pB,NEED_INLINE))) )
2015         {
2016                 WRITE_LOCK_IRQSAVE(&pCh->Obuf_spinlock,flags);
2017                 stripIndex = pCh->Obuf_strip;
2018
2019                 ip2trace (CHANN, ITRC_SICMD, 3, 2, stripIndex, pCh->Obuf_stuff );
2020
2021                 // as long as there are packets for this channel...
2022                 bailout2 = 1000;
2023                 while ( --bailout2 && stripIndex != pCh->Obuf_stuff) {
2024                         pRemove = &(pCh->Obuf[stripIndex]);
2025
2026                         // Must determine whether this be a data or command packet to
2027                         // calculate correctly the header size and the amount of
2028                         // flow-control credit this type of packet will use.
2029                         if (PTYPE_OF(pRemove) == PTYPE_DATA) {
2030                                 flowsize = DATA_COUNT_OF(pRemove);
2031                                 packetSize = flowsize + sizeof(i2DataHeader);
2032                         } else {
2033                                 flowsize = CMD_COUNT_OF(pRemove);
2034                                 packetSize = flowsize + sizeof(i2CmdHeader);
2035                         }
2036                         flowsize = CREDIT_USAGE(flowsize);
2037                         paddedSize = ROUNDUP(packetSize);
2038
2039                         ip2trace (CHANN, ITRC_SICMD, 4, 2, pB->i2eFifoRemains, paddedSize );
2040
2041                         // If we don't have enough credits from the board to send the data,
2042                         // flag the channel that we are waiting for flow control credit, and
2043                         // break out. This will clean up this channel and remove us from the
2044                         // queue of hot things to do.
2045
2046                                 ip2trace (CHANN, ITRC_SICMD, 5, 2, pCh->outfl.room, flowsize );
2047
2048                         if (pCh->outfl.room <= flowsize)        {
2049                                 // Do Not have the credits to send this packet.
2050                                 i2QueueNeeds(pB, pCh, NEED_CREDIT);
2051                                 notClogged = 0;
2052                                 break;   // So to do next channel
2053                         }
2054                         if ( (paddedSize > 0)
2055                                 && ( 0 == i2Write2Fifo(pB, pRemove, paddedSize, 128))) {
2056                                 // Do Not have room in fifo to send this packet.
2057                                 notClogged = 0;
2058                                 i2QueueNeeds(pB, pCh, NEED_INLINE);
2059                                 break;   // Break from the channel
2060                         }
2061 #ifdef DEBUG_FIFO
2062 WriteDBGBuf("DATA", pRemove, paddedSize);
2063 #endif /* DEBUG_FIFO */
2064                         pB->debugInlineCount++;
2065
2066                         pCh->icount.tx += flowsize;
2067                         // Update current credits
2068                         pCh->outfl.room -= flowsize;
2069                         pCh->outfl.asof += flowsize;
2070                         if (PTYPE_OF(pRemove) == PTYPE_DATA) {
2071                                 pCh->Obuf_char_count -= DATA_COUNT_OF(pRemove);
2072                         }
2073                         pRemove += packetSize;
2074                         stripIndex += packetSize;
2075
2076                         ip2trace (CHANN, ITRC_SICMD, 6, 2, stripIndex, pCh->Obuf_strip);
2077
2078                         if (stripIndex >= OBUF_SIZE) {
2079                                 stripIndex = 0;
2080                                 pRemove = pCh->Obuf;
2081
2082                                 ip2trace (CHANN, ITRC_SICMD, 7, 1, stripIndex );
2083
2084                         }
2085                 }       /* while */
2086                 if ( !bailout2 ) {
2087                         ip2trace (CHANN, ITRC_ERROR, 3, 0 );
2088                 }
2089                 // Done with this channel. Move to next, removing this one from the
2090                 // queue of channels if we cleaned it out (i.e., didn't get clogged.
2091                 pCh->Obuf_strip = stripIndex;
2092                 WRITE_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags);
2093                 if ( notClogged )
2094                 {
2095
2096                         ip2trace (CHANN, ITRC_SICMD, 8, 0 );
2097
2098                         if ( pCh->pTTY ) {
2099                                 ip2_owake(pCh->pTTY);
2100                         }
2101                 }
2102         }  // Either clogged or finished all the work
2103
2104         if ( !bailout ) {
2105                 ip2trace (ITRC_NO_PORT, ITRC_ERROR, 4, 0 );
2106         }
2107
2108         ip2trace (ITRC_NO_PORT, ITRC_SICMD, ITRC_RETURN, 1,pB->i2Dbuf_strip);
2109 }
2110
2111 //******************************************************************************
2112 // Function:   serviceOutgoingFifo(pB)
2113 // Parameters: Pointer to a board structure
2114 // Returns:    Nothing
2115 //
2116 // Description:
2117 // Helper routine to put data in the outgoing fifo, if we aren't already waiting
2118 // for something to be there. If the fifo has only room for a very little data,
2119 // go head and hit the board with a mailbox hit immediately. Otherwise, it will
2120 // have to happen later in the interrupt processing. Since this routine may be
2121 // called both at interrupt and foreground time, we must turn off interrupts
2122 // during the entire process.
2123 //******************************************************************************
2124 static void
2125 serviceOutgoingFifo(i2eBordStrPtr pB)
2126 {
2127         // If we aren't currently waiting for the board to empty our fifo, service
2128         // everything that is pending, in priority order (especially, Bypass before
2129         // Inline).
2130         if ( ! pB->i2eWaitingForEmptyFifo )
2131         {
2132                 i2StuffFifoFlow(pB);
2133                 i2StuffFifoBypass(pB);
2134                 i2StuffFifoInline(pB);
2135
2136                 iiSendPendingMail(pB);
2137         }
2138 }
2139
2140 //******************************************************************************
2141 // Function:   i2ServiceBoard(pB)
2142 // Parameters: Pointer to a board structure
2143 // Returns:    Nothing
2144 //
2145 // Description:
2146 // Normally this is called from interrupt level, but there is deliberately
2147 // nothing in here specific to being called from interrupt level. All the
2148 // hardware-specific, interrupt-specific things happen at the outer levels.
2149 //
2150 // For example, a timer interrupt could drive this routine for some sort of
2151 // polled operation. The only requirement is that the programmer deal with any
2152 // atomiticity/concurrency issues that result.
2153 //
2154 // This routine responds to the board's having sent mailbox information to the
2155 // host (which would normally cause an interrupt). This routine reads the
2156 // incoming mailbox. If there is no data in it, this board did not create the
2157 // interrupt and/or has nothing to be done to it. (Except, if we have been
2158 // waiting to write mailbox data to it, we may do so.
2159 //
2160 // Based on the value in the mailbox, we may take various actions.
2161 //
2162 // No checking here of pB validity: after all, it shouldn't have been called by
2163 // the handler unless pB were on the list.
2164 //******************************************************************************
2165 static inline int
2166 i2ServiceBoard ( i2eBordStrPtr pB )
2167 {
2168         unsigned inmail;
2169         unsigned long flags;
2170
2171
2172         /* This should be atomic because of the way we are called... */
2173         if (NO_MAIL_HERE == ( inmail = pB->i2eStartMail ) ) {
2174                 inmail = iiGetMail(pB);
2175         }
2176         pB->i2eStartMail = NO_MAIL_HERE;
2177
2178         ip2trace (ITRC_NO_PORT, ITRC_INTR, 2, 1, inmail );
2179
2180         if (inmail != NO_MAIL_HERE) {
2181                 // If the board has gone fatal, nothing to do but hit a bit that will
2182                 // alert foreground tasks to protest!
2183                 if ( inmail & MB_FATAL_ERROR ) {
2184                         pB->i2eFatal = 1;
2185                         goto exit_i2ServiceBoard;
2186                 }
2187
2188                 /* Assuming no fatal condition, we proceed to do work */
2189                 if ( inmail & MB_IN_STUFFED ) {
2190                         pB->i2eFifoInInts++;
2191                         i2StripFifo(pB);     /* There might be incoming packets */
2192                 }
2193
2194                 if (inmail & MB_OUT_STRIPPED) {
2195                         pB->i2eFifoOutInts++;
2196                         WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags);
2197                         pB->i2eFifoRemains = pB->i2eFifoSize;
2198                         pB->i2eWaitingForEmptyFifo = 0;
2199                         WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags);
2200
2201                         ip2trace (ITRC_NO_PORT, ITRC_INTR, 30, 1, pB->i2eFifoRemains );
2202
2203                 }
2204                 serviceOutgoingFifo(pB);
2205         }
2206
2207         ip2trace (ITRC_NO_PORT, ITRC_INTR, 8, 0 );
2208
2209 exit_i2ServiceBoard:
2210
2211         return 0;
2212 }