Merge branches 'pm-cpufreq', 'pm-cpuidle', 'pm-devfreq', 'pm-opp' and 'pm-tools'
[linux-drm-fsl-dcu.git] / arch / um / kernel / trap.c
1 /*
2  * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
3  * Licensed under the GPL
4  */
5
6 #include <linux/mm.h>
7 #include <linux/sched.h>
8 #include <linux/hardirq.h>
9 #include <linux/module.h>
10 #include <asm/current.h>
11 #include <asm/pgtable.h>
12 #include <asm/tlbflush.h>
13 #include <arch.h>
14 #include <as-layout.h>
15 #include <kern_util.h>
16 #include <os.h>
17 #include <skas.h>
18
19 /*
20  * Note this is constrained to return 0, -EFAULT, -EACCESS, -ENOMEM by
21  * segv().
22  */
23 int handle_page_fault(unsigned long address, unsigned long ip,
24                       int is_write, int is_user, int *code_out)
25 {
26         struct mm_struct *mm = current->mm;
27         struct vm_area_struct *vma;
28         pgd_t *pgd;
29         pud_t *pud;
30         pmd_t *pmd;
31         pte_t *pte;
32         int err = -EFAULT;
33         unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
34
35         *code_out = SEGV_MAPERR;
36
37         /*
38          * If the fault was during atomic operation, don't take the fault, just
39          * fail.
40          */
41         if (in_atomic())
42                 goto out_nosemaphore;
43
44         if (is_user)
45                 flags |= FAULT_FLAG_USER;
46 retry:
47         down_read(&mm->mmap_sem);
48         vma = find_vma(mm, address);
49         if (!vma)
50                 goto out;
51         else if (vma->vm_start <= address)
52                 goto good_area;
53         else if (!(vma->vm_flags & VM_GROWSDOWN))
54                 goto out;
55         else if (is_user && !ARCH_IS_STACKGROW(address))
56                 goto out;
57         else if (expand_stack(vma, address))
58                 goto out;
59
60 good_area:
61         *code_out = SEGV_ACCERR;
62         if (is_write) {
63                 if (!(vma->vm_flags & VM_WRITE))
64                         goto out;
65                 flags |= FAULT_FLAG_WRITE;
66         } else {
67                 /* Don't require VM_READ|VM_EXEC for write faults! */
68                 if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
69                         goto out;
70         }
71
72         do {
73                 int fault;
74
75                 fault = handle_mm_fault(mm, vma, address, flags);
76
77                 if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
78                         goto out_nosemaphore;
79
80                 if (unlikely(fault & VM_FAULT_ERROR)) {
81                         if (fault & VM_FAULT_OOM) {
82                                 goto out_of_memory;
83                         } else if (fault & VM_FAULT_SIGSEGV) {
84                                 goto out;
85                         } else if (fault & VM_FAULT_SIGBUS) {
86                                 err = -EACCES;
87                                 goto out;
88                         }
89                         BUG();
90                 }
91                 if (flags & FAULT_FLAG_ALLOW_RETRY) {
92                         if (fault & VM_FAULT_MAJOR)
93                                 current->maj_flt++;
94                         else
95                                 current->min_flt++;
96                         if (fault & VM_FAULT_RETRY) {
97                                 flags &= ~FAULT_FLAG_ALLOW_RETRY;
98                                 flags |= FAULT_FLAG_TRIED;
99
100                                 goto retry;
101                         }
102                 }
103
104                 pgd = pgd_offset(mm, address);
105                 pud = pud_offset(pgd, address);
106                 pmd = pmd_offset(pud, address);
107                 pte = pte_offset_kernel(pmd, address);
108         } while (!pte_present(*pte));
109         err = 0;
110         /*
111          * The below warning was added in place of
112          *      pte_mkyoung(); if (is_write) pte_mkdirty();
113          * If it's triggered, we'd see normally a hang here (a clean pte is
114          * marked read-only to emulate the dirty bit).
115          * However, the generic code can mark a PTE writable but clean on a
116          * concurrent read fault, triggering this harmlessly. So comment it out.
117          */
118 #if 0
119         WARN_ON(!pte_young(*pte) || (is_write && !pte_dirty(*pte)));
120 #endif
121         flush_tlb_page(vma, address);
122 out:
123         up_read(&mm->mmap_sem);
124 out_nosemaphore:
125         return err;
126
127 out_of_memory:
128         /*
129          * We ran out of memory, call the OOM killer, and return the userspace
130          * (which will retry the fault, or kill us if we got oom-killed).
131          */
132         up_read(&mm->mmap_sem);
133         if (!is_user)
134                 goto out_nosemaphore;
135         pagefault_out_of_memory();
136         return 0;
137 }
138 EXPORT_SYMBOL(handle_page_fault);
139
140 static void show_segv_info(struct uml_pt_regs *regs)
141 {
142         struct task_struct *tsk = current;
143         struct faultinfo *fi = UPT_FAULTINFO(regs);
144
145         if (!unhandled_signal(tsk, SIGSEGV))
146                 return;
147
148         if (!printk_ratelimit())
149                 return;
150
151         printk("%s%s[%d]: segfault at %lx ip %p sp %p error %x",
152                 task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
153                 tsk->comm, task_pid_nr(tsk), FAULT_ADDRESS(*fi),
154                 (void *)UPT_IP(regs), (void *)UPT_SP(regs),
155                 fi->error_code);
156
157         print_vma_addr(KERN_CONT " in ", UPT_IP(regs));
158         printk(KERN_CONT "\n");
159 }
160
161 static void bad_segv(struct faultinfo fi, unsigned long ip)
162 {
163         struct siginfo si;
164
165         si.si_signo = SIGSEGV;
166         si.si_code = SEGV_ACCERR;
167         si.si_addr = (void __user *) FAULT_ADDRESS(fi);
168         current->thread.arch.faultinfo = fi;
169         force_sig_info(SIGSEGV, &si, current);
170 }
171
172 void fatal_sigsegv(void)
173 {
174         force_sigsegv(SIGSEGV, current);
175         do_signal();
176         /*
177          * This is to tell gcc that we're not returning - do_signal
178          * can, in general, return, but in this case, it's not, since
179          * we just got a fatal SIGSEGV queued.
180          */
181         os_dump_core();
182 }
183
184 void segv_handler(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs)
185 {
186         struct faultinfo * fi = UPT_FAULTINFO(regs);
187
188         if (UPT_IS_USER(regs) && !SEGV_IS_FIXABLE(fi)) {
189                 show_segv_info(regs);
190                 bad_segv(*fi, UPT_IP(regs));
191                 return;
192         }
193         segv(*fi, UPT_IP(regs), UPT_IS_USER(regs), regs);
194 }
195
196 /*
197  * We give a *copy* of the faultinfo in the regs to segv.
198  * This must be done, since nesting SEGVs could overwrite
199  * the info in the regs. A pointer to the info then would
200  * give us bad data!
201  */
202 unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user,
203                    struct uml_pt_regs *regs)
204 {
205         struct siginfo si;
206         jmp_buf *catcher;
207         int err;
208         int is_write = FAULT_WRITE(fi);
209         unsigned long address = FAULT_ADDRESS(fi);
210
211         if (!is_user && regs)
212                 current->thread.segv_regs = container_of(regs, struct pt_regs, regs);
213
214         if (!is_user && (address >= start_vm) && (address < end_vm)) {
215                 flush_tlb_kernel_vm();
216                 goto out;
217         }
218         else if (current->mm == NULL) {
219                 show_regs(container_of(regs, struct pt_regs, regs));
220                 panic("Segfault with no mm");
221         }
222
223         if (SEGV_IS_FIXABLE(&fi) || SEGV_MAYBE_FIXABLE(&fi))
224                 err = handle_page_fault(address, ip, is_write, is_user,
225                                         &si.si_code);
226         else {
227                 err = -EFAULT;
228                 /*
229                  * A thread accessed NULL, we get a fault, but CR2 is invalid.
230                  * This code is used in __do_copy_from_user() of TT mode.
231                  * XXX tt mode is gone, so maybe this isn't needed any more
232                  */
233                 address = 0;
234         }
235
236         catcher = current->thread.fault_catcher;
237         if (!err)
238                 goto out;
239         else if (catcher != NULL) {
240                 current->thread.fault_addr = (void *) address;
241                 UML_LONGJMP(catcher, 1);
242         }
243         else if (current->thread.fault_addr != NULL)
244                 panic("fault_addr set but no fault catcher");
245         else if (!is_user && arch_fixup(ip, regs))
246                 goto out;
247
248         if (!is_user) {
249                 show_regs(container_of(regs, struct pt_regs, regs));
250                 panic("Kernel mode fault at addr 0x%lx, ip 0x%lx",
251                       address, ip);
252         }
253
254         show_segv_info(regs);
255
256         if (err == -EACCES) {
257                 si.si_signo = SIGBUS;
258                 si.si_errno = 0;
259                 si.si_code = BUS_ADRERR;
260                 si.si_addr = (void __user *)address;
261                 current->thread.arch.faultinfo = fi;
262                 force_sig_info(SIGBUS, &si, current);
263         } else {
264                 BUG_ON(err != -EFAULT);
265                 si.si_signo = SIGSEGV;
266                 si.si_addr = (void __user *) address;
267                 current->thread.arch.faultinfo = fi;
268                 force_sig_info(SIGSEGV, &si, current);
269         }
270
271 out:
272         if (regs)
273                 current->thread.segv_regs = NULL;
274
275         return 0;
276 }
277
278 void relay_signal(int sig, struct siginfo *si, struct uml_pt_regs *regs)
279 {
280         struct faultinfo *fi;
281         struct siginfo clean_si;
282
283         if (!UPT_IS_USER(regs)) {
284                 if (sig == SIGBUS)
285                         printk(KERN_ERR "Bus error - the host /dev/shm or /tmp "
286                                "mount likely just ran out of space\n");
287                 panic("Kernel mode signal %d", sig);
288         }
289
290         arch_examine_signal(sig, regs);
291
292         memset(&clean_si, 0, sizeof(clean_si));
293         clean_si.si_signo = si->si_signo;
294         clean_si.si_errno = si->si_errno;
295         clean_si.si_code = si->si_code;
296         switch (sig) {
297         case SIGILL:
298         case SIGFPE:
299         case SIGSEGV:
300         case SIGBUS:
301         case SIGTRAP:
302                 fi = UPT_FAULTINFO(regs);
303                 clean_si.si_addr = (void __user *) FAULT_ADDRESS(*fi);
304                 current->thread.arch.faultinfo = *fi;
305 #ifdef __ARCH_SI_TRAPNO
306                 clean_si.si_trapno = si->si_trapno;
307 #endif
308                 break;
309         default:
310                 printk(KERN_ERR "Attempted to relay unknown signal %d (si_code = %d)\n",
311                         sig, si->si_code);
312         }
313
314         force_sig_info(sig, &clean_si, current);
315 }
316
317 void bus_handler(int sig, struct siginfo *si, struct uml_pt_regs *regs)
318 {
319         if (current->thread.fault_catcher != NULL)
320                 UML_LONGJMP(current->thread.fault_catcher, 1);
321         else
322                 relay_signal(sig, si, regs);
323 }
324
325 void winch(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs)
326 {
327         do_IRQ(WINCH_IRQ, regs);
328 }
329
330 void trap_init(void)
331 {
332 }