arch/powerpc/boot/dts/mpc8568mds.dts

   1 /*
   2  * MPC8568E MDS Device Tree Source
   3  *
   4  * Copyright 2007 Freescale Semiconductor Inc.
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10  */
  11
  12
  13 /*
  14 /memreserve/    00000000 1000000;
  15 */
  16
  17 / {
  18         model = "MPC8568EMDS";
  19         compatible = "MPC85xxMDS";
  20         #address-cells = <1>;
  21         #size-cells = <1>;
  22         linux,phandle = <100>;
  23
  24         cpus {
  25                 #cpus = <1>;
  26                 #address-cells = <1>;
  27                 #size-cells = <0>;
  28                 linux,phandle = <200>;
  29
  30                 PowerPC,8568@0 {
  31                         device_type = "cpu";
  32                         reg = <0>;
  33                         d-cache-line-size = <20>;       // 32 bytes
  34                         i-cache-line-size = <20>;       // 32 bytes
  35                         d-cache-size = <8000>;          // L1, 32K
  36                         i-cache-size = <8000>;          // L1, 32K
  37                         timebase-frequency = <0>;
  38                         bus-frequency = <0>;
  39                         clock-frequency = <0>;
  40                         32-bit;
  41                         linux,phandle = <201>;
  42                 };
  43         };
  44
  45         memory {
  46                 device_type = "memory";
  47                 linux,phandle = <300>;
  48                 reg = <00000000 10000000>;
  49         };
  50
  51         bcsr@f8000000 {
  52                 device_type = "board-control";
  53                 reg = <f8000000 8000>;
  54         };
  55
  56         soc8568@e0000000 {
  57                 #address-cells = <1>;
  58                 #size-cells = <1>;
  59                 #interrupt-cells = <2>;
  60                 device_type = "soc";
  61                 ranges = <0 e0000000 00100000>;
  62                 reg = <e0000000 00100000>;
  63                 bus-frequency = <0>;
  64
  65                 i2c@3000 {
  66                         device_type = "i2c";
  67                         compatible = "fsl-i2c";
  68                         reg = <3000 100>;
  69                         interrupts = <1b 2>;
  70                         interrupt-parent = <40000>;
  71                         dfsrr;
  72                 };
  73
  74                 i2c@3100 {
  75                         device_type = "i2c";
  76                         compatible = "fsl-i2c";
  77                         reg = <3100 100>;
  78                         interrupts = <1b 2>;
  79                         interrupt-parent = <40000>;
  80                         dfsrr;
  81                 };
  82
  83                 mdio@24520 {
  84                         #address-cells = <1>;
  85                         #size-cells = <0>;
  86                         device_type = "mdio";
  87                         compatible = "gianfar";
  88                         reg = <24520 20>;
  89                         linux,phandle = <24520>;
  90                         ethernet-phy@0 {
  91                                 linux,phandle = <2452000>;
  92                                 interrupt-parent = <40000>;
  93                                 interrupts = <31 1>;
  94                                 reg = <0>;
  95                                 device_type = "ethernet-phy";
  96                         };
  97                         ethernet-phy@1 {
  98                                 linux,phandle = <2452001>;
  99                                 interrupt-parent = <40000>;
 100                                 interrupts = <32 1>;
 101                                 reg = <1>;
 102                                 device_type = "ethernet-phy";
 103                         };
 104
 105                         ethernet-phy@2 {
 106                                 linux,phandle = <2452002>;
 107                                 interrupt-parent = <40000>;
 108                                 interrupts = <31 1>;
 109                                 reg = <2>;
 110                                 device_type = "ethernet-phy";
 111                         };
 112                         ethernet-phy@3 {
 113                                 linux,phandle = <2452003>;
 114                                 interrupt-parent = <40000>;
 115                                 interrupts = <32 1>;
 116                                 reg = <3>;
 117                                 device_type = "ethernet-phy";
 118                         };
 119                 };
 120
 121                 ethernet@24000 {
 122                         #address-cells = <1>;
 123                         #size-cells = <0>;
 124                         device_type = "network";
 125                         model = "eTSEC";
 126                         compatible = "gianfar";
 127                         reg = <24000 1000>;
 128                         mac-address = [ 00 00 00 00 00 00 ];
 129                         interrupts = <d 2 e 2 12 2>;
 130                         interrupt-parent = <40000>;
 131                         phy-handle = <2452002>;
 132                 };
 133
 134                 ethernet@25000 {
 135                         #address-cells = <1>;
 136                         #size-cells = <0>;
 137                         device_type = "network";
 138                         model = "eTSEC";
 139                         compatible = "gianfar";
 140                         reg = <25000 1000>;
 141                         mac-address = [ 00 00 00 00 00 00];
 142                         interrupts = <13 2 14 2 18 2>;
 143                         interrupt-parent = <40000>;
 144                         phy-handle = <2452003>;
 145                 };
 146
 147                 serial@4500 {
 148                         device_type = "serial";
 149                         compatible = "ns16550";
 150                         reg = <4500 100>;
 151                         clock-frequency = <0>;
 152                         interrupts = <1a 2>;
 153                         interrupt-parent = <40000>;
 154                 };
 155
 156                 serial@4600 {
 157                         device_type = "serial";
 158                         compatible = "ns16550";
 159                         reg = <4600 100>;
 160                         clock-frequency = <0>;
 161                         interrupts = <1a 2>;
 162                         interrupt-parent = <40000>;
 163                 };
 164
 165                 crypto@30000 {
 166                         device_type = "crypto";
 167                         model = "SEC2";
 168                         compatible = "talitos";
 169                         reg = <30000 f000>;
 170                         interrupts = <1d 2>;
 171                         interrupt-parent = <40000>;
 172                         num-channels = <4>;
 173                         channel-fifo-len = <18>;
 174                         exec-units-mask = <000000fe>;
 175                         descriptor-types-mask = <012b0ebf>;
 176                 };
 177
 178                 pic@40000 {
 179                         linux,phandle = <40000>;
 180                         clock-frequency = <0>;
 181                         interrupt-controller;
 182                         #address-cells = <0>;
 183                         #interrupt-cells = <2>;
 184                         reg = <40000 40000>;
 185                         built-in;
 186                         compatible = "chrp,open-pic";
 187                         device_type = "open-pic";
 188                         big-endian;
 189                 };
 190                 par_io@e0100 {
 191                         reg = <e0100 100>;
 192                         device_type = "par_io";
 193                         num-ports = <7>;
 194
 195                         ucc_pin@01 {
 196                                 linux,phandle = <e010001>;
 197                                 pio-map = <
 198                         /* port  pin  dir  open_drain  assignment  has_irq */
 199                                         4  0a  1  0  2  0       /* TxD0 */
 200                                         4  09  1  0  2  0       /* TxD1 */
 201                                         4  08  1  0  2  0       /* TxD2 */
 202                                         4  07  1  0  2  0       /* TxD3 */
 203                                         4  17  1  0  2  0       /* TxD4 */
 204                                         4  16  1  0  2  0       /* TxD5 */
 205                                         4  15  1  0  2  0       /* TxD6 */
 206                                         4  14  1  0  2  0       /* TxD7 */
 207                                         4  0f  2  0  2  0       /* RxD0 */
 208                                         4  0e  2  0  2  0       /* RxD1 */
 209                                         4  0d  2  0  2  0       /* RxD2 */
 210                                         4  0c  2  0  2  0       /* RxD3 */
 211                                         4  1d  2  0  2  0       /* RxD4 */
 212                                         4  1c  2  0  2  0       /* RxD5 */
 213                                         4  1b  2  0  2  0       /* RxD6 */
 214                                         4  1a  2  0  2  0       /* RxD7 */
 215                                         4  0b  1  0  2  0       /* TX_EN */
 216                                         4  18  1  0  2  0       /* TX_ER */
 217                                         4  0f  2  0  2  0       /* RX_DV */
 218                                         4  1e  2  0  2  0       /* RX_ER */
 219                                         4  11  2  0  2  0       /* RX_CLK */
 220                                         4  13  1  0  2  0       /* GTX_CLK */
 221                                         1  1f  2  0  3  0>;     /* GTX125 */
 222                         };
 223                         ucc_pin@02 {
 224                                 linux,phandle = <e010002>;
 225                                 pio-map = <
 226                         /* port  pin  dir  open_drain  assignment  has_irq */
 227                                         5  0a 1  0  2  0   /* TxD0 */
 228                                         5  09 1  0  2  0   /* TxD1 */
 229                                         5  08 1  0  2  0   /* TxD2 */
 230                                         5  07 1  0  2  0   /* TxD3 */
 231                                         5  17 1  0  2  0   /* TxD4 */
 232                                         5  16 1  0  2  0   /* TxD5 */
 233                                         5  15 1  0  2  0   /* TxD6 */
 234                                         5  14 1  0  2  0   /* TxD7 */
 235                                         5  0f 2  0  2  0   /* RxD0 */
 236                                         5  0e 2  0  2  0   /* RxD1 */
 237                                         5  0d 2  0  2  0   /* RxD2 */
 238                                         5  0c 2  0  2  0   /* RxD3 */
 239                                         5  1d 2  0  2  0   /* RxD4 */
 240                                         5  1c 2  0  2  0   /* RxD5 */
 241                                         5  1b 2  0  2  0   /* RxD6 */
 242                                         5  1a 2  0  2  0   /* RxD7 */
 243                                         5  0b 1  0  2  0   /* TX_EN */
 244                                         5  18 1  0  2  0   /* TX_ER */
 245                                         5  10 2  0  2  0   /* RX_DV */
 246                                         5  1e 2  0  2  0   /* RX_ER */
 247                                         5  11 2  0  2  0   /* RX_CLK */
 248                                         5  13 1  0  2  0   /* GTX_CLK */
 249                                         1  1f 2  0  3  0   /* GTX125 */
 250                                         4  06 3  0  2  0   /* MDIO */
 251                                         4  05 1  0  2  0>; /* MDC */
 252                         };
 253                 };
 254         };
 255
 256         qe@e0080000 {
 257                 #address-cells = <1>;
 258                 #size-cells = <1>;
 259                 device_type = "qe";
 260                 model = "QE";
 261                 ranges = <0 e0080000 00040000>;
 262                 reg = <e0080000 480>;
 263                 brg-frequency = <0>;
 264                 bus-frequency = <179A7B00>;
 265
 266                 muram@10000 {
 267                         device_type = "muram";
 268                         ranges = <0 00010000 0000c000>;
 269
 270                         data-only@0{
 271                                 reg = <0 c000>;
 272                         };
 273                 };
 274
 275                 spi@4c0 {
 276                         device_type = "spi";
 277                         compatible = "fsl_spi";
 278                         reg = <4c0 40>;
 279                         interrupts = <2>;
 280                         interrupt-parent = <80>;
 281                         mode = "cpu";
 282                 };
 283
 284                 spi@500 {
 285                         device_type = "spi";
 286                         compatible = "fsl_spi";
 287                         reg = <500 40>;
 288                         interrupts = <1>;
 289                         interrupt-parent = <80>;
 290                         mode = "cpu";
 291                 };
 292
 293                 ucc@2000 {
 294                         device_type = "network";
 295                         compatible = "ucc_geth";
 296                         model = "UCC";
 297                         device-id = <1>;
 298                         reg = <2000 200>;
 299                         interrupts = <20>;
 300                         interrupt-parent = <80>;
 301                         mac-address = [ 00 04 9f 00 23 23 ];
 302                         rx-clock = <0>;
 303                         tx-clock = <19>;
 304                         phy-handle = <212000>;
 305                         pio-handle = <e010001>;
 306                 };
 307
 308                 ucc@3000 {
 309                         device_type = "network";
 310                         compatible = "ucc_geth";
 311                         model = "UCC";
 312                         device-id = <2>;
 313                         reg = <3000 200>;
 314                         interrupts = <21>;
 315                         interrupt-parent = <80>;
 316                         mac-address = [ 00 11 22 33 44 55 ];
 317                         rx-clock = <0>;
 318                         tx-clock = <14>;
 319                         phy-handle = <212001>;
 320                         pio-handle = <e010002>;
 321                 };
 322
 323                 mdio@2120 {
 324                         #address-cells = <1>;
 325                         #size-cells = <0>;
 326                         reg = <2120 18>;
 327                         device_type = "mdio";
 328                         compatible = "ucc_geth_phy";
 329
 330                         /* These are the same PHYs as on
 331                          * gianfar's MDIO bus */
 332                         ethernet-phy@00 {
 333                                 linux,phandle = <212000>;
 334                                 interrupt-parent = <40000>;
 335                                 interrupts = <31 1>;
 336                                 reg = <0>;
 337                                 device_type = "ethernet-phy";
 338                                 interface = <6>; //ENET_1000_GMII
 339                         };
 340                         ethernet-phy@01 {
 341                                 linux,phandle = <212001>;
 342                                 interrupt-parent = <40000>;
 343                                 interrupts = <32 1>;
 344                                 reg = <1>;
 345                                 device_type = "ethernet-phy";
 346                                 interface = <6>;
 347                         };
 348                         ethernet-phy@02 {
 349                                 linux,phandle = <212002>;
 350                                 interrupt-parent = <40000>;
 351                                 interrupts = <31 1>;
 352                                 reg = <2>;
 353                                 device_type = "ethernet-phy";
 354                                 interface = <6>; //ENET_1000_GMII
 355                         };
 356                         ethernet-phy@03 {
 357                                 linux,phandle = <212003>;
 358                                 interrupt-parent = <40000>;
 359                                 interrupts = <32 1>;
 360                                 reg = <3>;
 361                                 device_type = "ethernet-phy";
 362                                 interface = <6>; //ENET_1000_GMII
 363                         };
 364                 };
 365
 366                 qeic@80 {
 367                         linux,phandle = <80>;
 368                         interrupt-controller;
 369                         device_type = "qeic";
 370                         #address-cells = <0>;
 371                         #interrupt-cells = <1>;
 372                         reg = <80 80>;
 373                         built-in;
 374                         big-endian;
 375                         interrupts = <1e 2 1e 2>; //high:30 low:30
 376                         interrupt-parent = <40000>;
 377                 };
 378
 379         };
 380 };