arch/powerpc/boot/dts/mpc7448hpc2.dts

   1 /*
   2  * MPC7448HPC2 (Taiga) board Device Tree Source
   3  *
   4  * Copyright 2006 Freescale Semiconductor Inc.
   5  * 2006 Roy Zang <Roy Zang at freescale.com>.
   6  *
   7  * This program is free software; you can redistribute  it and/or modify it
   8  * under  the terms of  the GNU General  Public License as published by the
   9  * Free Software Foundation;  either version 2 of the  License, or (at your
  10  * option) any later version.
  11  */
  12
  13
  14 / {
  15         model = "mpc7448hpc2";
  16         compatible = "mpc74xx";
  17         #address-cells = <1>;
  18         #size-cells = <1>;
  19         linux,phandle = <100>;
  20
  21         cpus {
  22                 #address-cells = <1>;
  23                 #size-cells =<0>;
  24                 linux,phandle = <200>;
  25
  26                 PowerPC,7448@0 {
  27                         device_type = "cpu";
  28                         reg = <0>;
  29                         d-cache-line-size = <20>;       // 32 bytes
  30                         i-cache-line-size = <20>;       // 32 bytes
  31                         d-cache-size = <8000>;          // L1, 32K bytes
  32                         i-cache-size = <8000>;          // L1, 32K bytes
  33                         timebase-frequency = <0>;       // 33 MHz, from uboot
  34                         clock-frequency = <0>;          // From U-Boot
  35                         bus-frequency = <0>;            // From U-Boot
  36                         32-bit;
  37                         linux,phandle = <201>;
  38                 };
  39         };
  40
  41         memory {
  42                 device_type = "memory";
  43                 linux,phandle = <300>;
  44                 reg = <00000000 20000000        // DDR2   512M at 0
  45                        >;
  46         };
  47
  48         tsi108@c0000000 {
  49                 #address-cells = <1>;
  50                 #size-cells = <1>;
  51                 #interrupt-cells = <2>;
  52                 device_type = "tsi-bridge";
  53                 ranges = <00000000 c0000000 00010000>;
  54                 reg = <c0000000 00010000>;
  55                 bus-frequency = <0>;
  56
  57                 i2c@7000 {
  58                         interrupt-parent = <7400>;
  59                         interrupts = <E 0>;
  60                         reg = <7000 400>;
  61                         device_type = "i2c";
  62                         compatible  = "tsi-i2c";
  63                 };
  64
  65                 mdio@6000 {
  66                         device_type = "mdio";
  67                         compatible = "tsi-ethernet";
  68
  69                         ethernet-phy@6000 {
  70                                 linux,phandle = <6000>;
  71                                 interrupt-parent = <7400>;
  72                                 interrupts = <2 1>;
  73                                 reg = <6000 50>;
  74                                 phy-id = <8>;
  75                                 device_type = "ethernet-phy";
  76                         };
  77
  78                         ethernet-phy@6400 {
  79                                 linux,phandle = <6400>;
  80                                 interrupt-parent = <7400>;
  81                                 interrupts = <2 1>;
  82                                 reg = <6000 50>;
  83                                 phy-id = <9>;
  84                                 device_type = "ethernet-phy";
  85                         };
  86
  87                 };
  88
  89                 ethernet@6200 {
  90                         #size-cells = <0>;
  91                         device_type = "network";
  92                         model = "TSI-ETH";
  93                         compatible = "tsi-ethernet";
  94                         reg = <6000 200>;
  95                         address = [ 00 06 D2 00 00 01 ];
  96                         interrupts = <10 2>;
  97                         interrupt-parent = <7400>;
  98                         phy-handle = <6000>;
  99                 };
 100
 101                 ethernet@6600 {
 102                         #address-cells = <1>;
 103                         #size-cells = <0>;
 104                         device_type = "network";
 105                         model = "TSI-ETH";
 106                         compatible = "tsi-ethernet";
 107                         reg = <6400 200>;
 108                         address = [ 00 06 D2 00 00 02 ];
 109                         interrupts = <11 2>;
 110                         interrupt-parent = <7400>;
 111                         phy-handle = <6400>;
 112                 };
 113
 114                 serial@7808 {
 115                         device_type = "serial";
 116                         compatible = "ns16550";
 117                         reg = <7808 200>;
 118                         clock-frequency = <3f6b5a00>;
 119                         interrupts = <c 0>;
 120                         interrupt-parent = <7400>;
 121                 };
 122
 123                 serial@7c08 {
 124                         device_type = "serial";
 125                         compatible = "ns16550";
 126                         reg = <7c08 200>;
 127                         clock-frequency = <3f6b5a00>;
 128                         interrupts = <d 0>;
 129                         interrupt-parent = <7400>;
 130                 };
 131
 132                 pic@7400 {
 133                         linux,phandle = <7400>;
 134                         clock-frequency = <0>;
 135                         interrupt-controller;
 136                         #address-cells = <0>;
 137                         #interrupt-cells = <2>;
 138                         reg = <7400 400>;
 139                         built-in;
 140                         compatible = "chrp,open-pic";
 141                         device_type = "open-pic";
 142                         big-endian;
 143                 };
 144                 pci@1000 {
 145                         compatible = "tsi10x";
 146                         device_type = "pci";
 147                         linux,phandle = <1000>;
 148                         #interrupt-cells = <1>;
 149                         #size-cells = <2>;
 150                         #address-cells = <3>;
 151                         reg = <1000 1000>;
 152                         bus-range = <0 0>;
 153                         ranges = <02000000 0 e0000000 e0000000 0 1A000000
 154                                   01000000 0 00000000 fa000000 0 00010000>;
 155                         clock-frequency = <7f28154>;
 156                         interrupt-parent = <7400>;
 157                         interrupts = <17 2>;
 158                         interrupt-map-mask = <f800 0 0 7>;
 159                         interrupt-map = <
 160
 161                                 /* IDSEL 0x11 */
 162                                 0800 0 0 1 1180 24 0
 163                                 0800 0 0 2 1180 25 0
 164                                 0800 0 0 3 1180 26 0
 165                                 0800 0 0 4 1180 27 0
 166
 167                                 /* IDSEL 0x12 */
 168                                 1000 0 0 1 1180 25 0
 169                                 1000 0 0 2 1180 26 0
 170                                 1000 0 0 3 1180 27 0
 171                                 1000 0 0 4 1180 24 0
 172
 173                                 /* IDSEL 0x13 */
 174                                 1800 0 0 1 1180 26 0
 175                                 1800 0 0 2 1180 27 0
 176                                 1800 0 0 3 1180 24 0
 177                                 1800 0 0 4 1180 25 0
 178
 179                                 /* IDSEL 0x14 */
 180                                 2000 0 0 1 1180 27 0
 181                                 2000 0 0 2 1180 24 0
 182                                 2000 0 0 3 1180 25 0
 183                                 2000 0 0 4 1180 26 0
 184                                 >;
 185                         router@1180 {
 186                                 linux,phandle = <1180>;
 187                                 clock-frequency = <0>;
 188                                 interrupt-controller;
 189                                 device_type = "pic-router";
 190                                 #address-cells = <0>;
 191                                 #interrupt-cells = <2>;
 192                                 built-in;
 193                                 big-endian;
 194                                 interrupts = <17 2>;
 195                                 interrupt-parent = <7400>;
 196                         };
 197                 };
 198         };
 199
 200 };