Pull video into test branch
[linux-drm-fsl-dcu.git] / arch / mips / pci / fixup-cobalt.c
1 /*
2  * Cobalt Qube/Raq PCI support
3  *
4  * This file is subject to the terms and conditions of the GNU General Public
5  * License.  See the file "COPYING" in the main directory of this archive
6  * for more details.
7  *
8  * Copyright (C) 1995, 1996, 1997, 2002, 2003 by Ralf Baechle
9  * Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv)
10  */
11 #include <linux/types.h>
12 #include <linux/pci.h>
13 #include <linux/kernel.h>
14 #include <linux/init.h>
15
16 #include <asm/pci.h>
17 #include <asm/io.h>
18 #include <asm/gt64120.h>
19
20 #include <asm/mach-cobalt/cobalt.h>
21
22 extern int cobalt_board_id;
23
24 static void qube_raq_galileo_early_fixup(struct pci_dev *dev)
25 {
26         if (dev->devfn == PCI_DEVFN(0, 0) &&
27                 (dev->class >> 8) == PCI_CLASS_MEMORY_OTHER) {
28
29                 dev->class = (PCI_CLASS_BRIDGE_HOST << 8) | (dev->class & 0xff);
30
31                 printk(KERN_INFO "Galileo: fixed bridge class\n");
32         }
33 }
34
35 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111,
36          qube_raq_galileo_early_fixup);
37
38 static void qube_raq_via_bmIDE_fixup(struct pci_dev *dev)
39 {
40         unsigned short cfgword;
41         unsigned char lt;
42
43         /* Enable Bus Mastering and fast back to back. */
44         pci_read_config_word(dev, PCI_COMMAND, &cfgword);
45         cfgword |= (PCI_COMMAND_FAST_BACK | PCI_COMMAND_MASTER);
46         pci_write_config_word(dev, PCI_COMMAND, cfgword);
47
48         /* Enable both ide interfaces. ROM only enables primary one.  */
49         pci_write_config_byte(dev, 0x40, 0xb);
50
51         /* Set latency timer to reasonable value. */
52         pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lt);
53         if (lt < 64)
54                 pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
55         pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8);
56 }
57
58 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1,
59          qube_raq_via_bmIDE_fixup);
60
61 static void qube_raq_galileo_fixup(struct pci_dev *dev)
62 {
63         unsigned short galileo_id;
64
65         if (dev->devfn != PCI_DEVFN(0, 0))
66                 return;
67
68         /* Fix PCI latency-timer and cache-line-size values in Galileo
69          * host bridge.
70          */
71         pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
72         pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8);
73
74         /*
75          * The code described by the comment below has been removed
76          * as it causes bus mastering by the Ethernet controllers
77          * to break under any kind of network load. We always set
78          * the retry timeouts to their maximum.
79          *
80          * --x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--
81          *
82          * On all machines prior to Q2, we had the STOP line disconnected
83          * from Galileo to VIA on PCI.  The new Galileo does not function
84          * correctly unless we have it connected.
85          *
86          * Therefore we must set the disconnect/retry cycle values to
87          * something sensible when using the new Galileo.
88          */
89         pci_read_config_word(dev, PCI_REVISION_ID, &galileo_id);
90         galileo_id &= 0xff;     /* mask off class info */
91
92         printk(KERN_INFO "Galileo: revision %u\n", galileo_id);
93
94 #if 0
95         if (galileo_id >= 0x10) {
96                 /* New Galileo, assumes PCI stop line to VIA is connected. */
97                 GT_WRITE(GT_PCI0_TOR_OFS, 0x4020);
98         } else if (galileo_id == 0x1 || galileo_id == 0x2)
99 #endif
100         {
101                 signed int timeo;
102                 /* XXX WE MUST DO THIS ELSE GALILEO LOCKS UP! -DaveM */
103                 timeo = GT_READ(GT_PCI0_TOR_OFS);
104                 /* Old Galileo, assumes PCI STOP line to VIA is disconnected. */
105                 GT_WRITE(GT_PCI0_TOR_OFS,
106                         (0xff << 16) |          /* retry count */
107                         (0xff << 8) |           /* timeout 1   */
108                         0xff);                  /* timeout 0   */
109
110                 /* enable PCI retry exceeded interrupt */
111                 GT_WRITE(GT_INTRMASK_OFS, GT_INTR_RETRYCTR0_MSK | GT_READ(GT_INTRMASK_OFS));
112         }
113 }
114
115 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111,
116          qube_raq_galileo_fixup);
117
118 static char irq_tab_qube1[] __initdata = {
119   [COBALT_PCICONF_CPU]     = 0,
120   [COBALT_PCICONF_ETH0]    = COBALT_QUBE1_ETH0_IRQ,
121   [COBALT_PCICONF_RAQSCSI] = COBALT_SCSI_IRQ,
122   [COBALT_PCICONF_VIA]     = 0,
123   [COBALT_PCICONF_PCISLOT] = COBALT_QUBE_SLOT_IRQ,
124   [COBALT_PCICONF_ETH1]    = 0
125 };
126
127 static char irq_tab_cobalt[] __initdata = {
128   [COBALT_PCICONF_CPU]     = 0,
129   [COBALT_PCICONF_ETH0]    = COBALT_ETH0_IRQ,
130   [COBALT_PCICONF_RAQSCSI] = COBALT_SCSI_IRQ,
131   [COBALT_PCICONF_VIA]     = 0,
132   [COBALT_PCICONF_PCISLOT] = COBALT_QUBE_SLOT_IRQ,
133   [COBALT_PCICONF_ETH1]    = COBALT_ETH1_IRQ
134 };
135
136 static char irq_tab_raq2[] __initdata = {
137   [COBALT_PCICONF_CPU]     = 0,
138   [COBALT_PCICONF_ETH0]    = COBALT_ETH0_IRQ,
139   [COBALT_PCICONF_RAQSCSI] = COBALT_RAQ_SCSI_IRQ,
140   [COBALT_PCICONF_VIA]     = 0,
141   [COBALT_PCICONF_PCISLOT] = COBALT_QUBE_SLOT_IRQ,
142   [COBALT_PCICONF_ETH1]    = COBALT_ETH1_IRQ
143 };
144
145 int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
146 {
147         if (cobalt_board_id < COBALT_BRD_ID_QUBE2)
148                 return irq_tab_qube1[slot];
149
150         if (cobalt_board_id == COBALT_BRD_ID_RAQ2)
151                 return irq_tab_raq2[slot];
152
153         return irq_tab_cobalt[slot];
154 }
155
156 /* Do platform specific device initialization at pci_enable_device() time */
157 int pcibios_plat_dev_init(struct pci_dev *dev)
158 {
159         return 0;
160 }