Merge branch 'acpi-ec'
[linux-drm-fsl-dcu.git] / arch / mips / kernel / smp-mt.c
1 /*
2  *  This program is free software; you can distribute it and/or modify it
3  *  under the terms of the GNU General Public License (Version 2) as
4  *  published by the Free Software Foundation.
5  *
6  *  This program is distributed in the hope it will be useful, but WITHOUT
7  *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
8  *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
9  *  for more details.
10  *
11  *  You should have received a copy of the GNU General Public License along
12  *  with this program; if not, write to the Free Software Foundation, Inc.,
13  *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
14  *
15  * Copyright (C) 2004, 05, 06 MIPS Technologies, Inc.
16  *    Elizabeth Clarke (beth@mips.com)
17  *    Ralf Baechle (ralf@linux-mips.org)
18  * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org)
19  */
20 #include <linux/kernel.h>
21 #include <linux/sched.h>
22 #include <linux/cpumask.h>
23 #include <linux/interrupt.h>
24 #include <linux/irqchip/mips-gic.h>
25 #include <linux/compiler.h>
26 #include <linux/smp.h>
27
28 #include <linux/atomic.h>
29 #include <asm/cacheflush.h>
30 #include <asm/cpu.h>
31 #include <asm/processor.h>
32 #include <asm/hardirq.h>
33 #include <asm/mmu_context.h>
34 #include <asm/time.h>
35 #include <asm/mipsregs.h>
36 #include <asm/mipsmtregs.h>
37 #include <asm/mips_mt.h>
38
39 static void __init smvp_copy_vpe_config(void)
40 {
41         write_vpe_c0_status(
42                 (read_c0_status() & ~(ST0_IM | ST0_IE | ST0_KSU)) | ST0_CU0);
43
44         /* set config to be the same as vpe0, particularly kseg0 coherency alg */
45         write_vpe_c0_config( read_c0_config());
46
47         /* make sure there are no software interrupts pending */
48         write_vpe_c0_cause(0);
49
50         /* Propagate Config7 */
51         write_vpe_c0_config7(read_c0_config7());
52
53         write_vpe_c0_count(read_c0_count());
54 }
55
56 static unsigned int __init smvp_vpe_init(unsigned int tc, unsigned int mvpconf0,
57         unsigned int ncpu)
58 {
59         if (tc > ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT))
60                 return ncpu;
61
62         /* Deactivate all but VPE 0 */
63         if (tc != 0) {
64                 unsigned long tmp = read_vpe_c0_vpeconf0();
65
66                 tmp &= ~VPECONF0_VPA;
67
68                 /* master VPE */
69                 tmp |= VPECONF0_MVP;
70                 write_vpe_c0_vpeconf0(tmp);
71
72                 /* Record this as available CPU */
73                 set_cpu_possible(tc, true);
74                 set_cpu_present(tc, true);
75                 __cpu_number_map[tc]    = ++ncpu;
76                 __cpu_logical_map[ncpu] = tc;
77         }
78
79         /* Disable multi-threading with TC's */
80         write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE);
81
82         if (tc != 0)
83                 smvp_copy_vpe_config();
84
85         return ncpu;
86 }
87
88 static void __init smvp_tc_init(unsigned int tc, unsigned int mvpconf0)
89 {
90         unsigned long tmp;
91
92         if (!tc)
93                 return;
94
95         /* bind a TC to each VPE, May as well put all excess TC's
96            on the last VPE */
97         if (tc >= (((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)+1))
98                 write_tc_c0_tcbind(read_tc_c0_tcbind() | ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT));
99         else {
100                 write_tc_c0_tcbind(read_tc_c0_tcbind() | tc);
101
102                 /* and set XTC */
103                 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | (tc << VPECONF0_XTC_SHIFT));
104         }
105
106         tmp = read_tc_c0_tcstatus();
107
108         /* mark not allocated and not dynamically allocatable */
109         tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
110         tmp |= TCSTATUS_IXMT;           /* interrupt exempt */
111         write_tc_c0_tcstatus(tmp);
112
113         write_tc_c0_tchalt(TCHALT_H);
114 }
115
116 static void vsmp_send_ipi_single(int cpu, unsigned int action)
117 {
118         int i;
119         unsigned long flags;
120         int vpflags;
121
122 #ifdef CONFIG_MIPS_GIC
123         if (gic_present) {
124                 gic_send_ipi_single(cpu, action);
125                 return;
126         }
127 #endif
128         local_irq_save(flags);
129
130         vpflags = dvpe();       /* can't access the other CPU's registers whilst MVPE enabled */
131
132         switch (action) {
133         case SMP_CALL_FUNCTION:
134                 i = C_SW1;
135                 break;
136
137         case SMP_RESCHEDULE_YOURSELF:
138         default:
139                 i = C_SW0;
140                 break;
141         }
142
143         /* 1:1 mapping of vpe and tc... */
144         settc(cpu);
145         write_vpe_c0_cause(read_vpe_c0_cause() | i);
146         evpe(vpflags);
147
148         local_irq_restore(flags);
149 }
150
151 static void vsmp_send_ipi_mask(const struct cpumask *mask, unsigned int action)
152 {
153         unsigned int i;
154
155         for_each_cpu(i, mask)
156                 vsmp_send_ipi_single(i, action);
157 }
158
159 static void vsmp_init_secondary(void)
160 {
161 #ifdef CONFIG_MIPS_GIC
162         /* This is Malta specific: IPI,performance and timer interrupts */
163         if (gic_present)
164                 change_c0_status(ST0_IM, STATUSF_IP2 | STATUSF_IP3 |
165                                          STATUSF_IP4 | STATUSF_IP5 |
166                                          STATUSF_IP6 | STATUSF_IP7);
167         else
168 #endif
169                 change_c0_status(ST0_IM, STATUSF_IP0 | STATUSF_IP1 |
170                                          STATUSF_IP6 | STATUSF_IP7);
171 }
172
173 static void vsmp_smp_finish(void)
174 {
175         /* CDFIXME: remove this? */
176         write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ));
177
178 #ifdef CONFIG_MIPS_MT_FPAFF
179         /* If we have an FPU, enroll ourselves in the FPU-full mask */
180         if (cpu_has_fpu)
181                 cpu_set(smp_processor_id(), mt_fpu_cpumask);
182 #endif /* CONFIG_MIPS_MT_FPAFF */
183
184         local_irq_enable();
185 }
186
187 /*
188  * Setup the PC, SP, and GP of a secondary processor and start it
189  * running!
190  * smp_bootstrap is the place to resume from
191  * __KSTK_TOS(idle) is apparently the stack pointer
192  * (unsigned long)idle->thread_info the gp
193  * assumes a 1:1 mapping of TC => VPE
194  */
195 static void vsmp_boot_secondary(int cpu, struct task_struct *idle)
196 {
197         struct thread_info *gp = task_thread_info(idle);
198         dvpe();
199         set_c0_mvpcontrol(MVPCONTROL_VPC);
200
201         settc(cpu);
202
203         /* restart */
204         write_tc_c0_tcrestart((unsigned long)&smp_bootstrap);
205
206         /* enable the tc this vpe/cpu will be running */
207         write_tc_c0_tcstatus((read_tc_c0_tcstatus() & ~TCSTATUS_IXMT) | TCSTATUS_A);
208
209         write_tc_c0_tchalt(0);
210
211         /* enable the VPE */
212         write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
213
214         /* stack pointer */
215         write_tc_gpr_sp( __KSTK_TOS(idle));
216
217         /* global pointer */
218         write_tc_gpr_gp((unsigned long)gp);
219
220         flush_icache_range((unsigned long)gp,
221                            (unsigned long)(gp + sizeof(struct thread_info)));
222
223         /* finally out of configuration and into chaos */
224         clear_c0_mvpcontrol(MVPCONTROL_VPC);
225
226         evpe(EVPE_ENABLE);
227 }
228
229 /*
230  * Common setup before any secondaries are started
231  * Make sure all CPU's are in a sensible state before we boot any of the
232  * secondaries
233  */
234 static void __init vsmp_smp_setup(void)
235 {
236         unsigned int mvpconf0, ntc, tc, ncpu = 0;
237         unsigned int nvpe;
238
239 #ifdef CONFIG_MIPS_MT_FPAFF
240         /* If we have an FPU, enroll ourselves in the FPU-full mask */
241         if (cpu_has_fpu)
242                 cpu_set(0, mt_fpu_cpumask);
243 #endif /* CONFIG_MIPS_MT_FPAFF */
244         if (!cpu_has_mipsmt)
245                 return;
246
247         /* disable MT so we can configure */
248         dvpe();
249         dmt();
250
251         /* Put MVPE's into 'configuration state' */
252         set_c0_mvpcontrol(MVPCONTROL_VPC);
253
254         mvpconf0 = read_c0_mvpconf0();
255         ntc = (mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT;
256
257         nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
258         smp_num_siblings = nvpe;
259
260         /* we'll always have more TC's than VPE's, so loop setting everything
261            to a sensible state */
262         for (tc = 0; tc <= ntc; tc++) {
263                 settc(tc);
264
265                 smvp_tc_init(tc, mvpconf0);
266                 ncpu = smvp_vpe_init(tc, mvpconf0, ncpu);
267         }
268
269         /* Release config state */
270         clear_c0_mvpcontrol(MVPCONTROL_VPC);
271
272         /* We'll wait until starting the secondaries before starting MVPE */
273
274         printk(KERN_INFO "Detected %i available secondary CPU(s)\n", ncpu);
275 }
276
277 static void __init vsmp_prepare_cpus(unsigned int max_cpus)
278 {
279         mips_mt_set_cpuoptions();
280 }
281
282 struct plat_smp_ops vsmp_smp_ops = {
283         .send_ipi_single        = vsmp_send_ipi_single,
284         .send_ipi_mask          = vsmp_send_ipi_mask,
285         .init_secondary         = vsmp_init_secondary,
286         .smp_finish             = vsmp_smp_finish,
287         .boot_secondary         = vsmp_boot_secondary,
288         .smp_setup              = vsmp_smp_setup,
289         .prepare_cpus           = vsmp_prepare_cpus,
290 };
291
292 #ifdef CONFIG_PROC_FS
293 static int proc_cpuinfo_chain_call(struct notifier_block *nfb,
294         unsigned long action_unused, void *data)
295 {
296         struct proc_cpuinfo_notifier_args *pcn = data;
297         struct seq_file *m = pcn->m;
298         unsigned long n = pcn->n;
299
300         if (!cpu_has_mipsmt)
301                 return NOTIFY_OK;
302
303         seq_printf(m, "VPE\t\t\t: %d\n", cpu_data[n].vpe_id);
304
305         return NOTIFY_OK;
306 }
307
308 static int __init proc_cpuinfo_notifier_init(void)
309 {
310         return proc_cpuinfo_notifier(proc_cpuinfo_chain_call, 0);
311 }
312
313 subsys_initcall(proc_cpuinfo_notifier_init);
314 #endif