Pull video into test branch
[linux-drm-fsl-dcu.git] / arch / arm / vfp / vfphw.S
1 /*
2  *  linux/arch/arm/vfp/vfphw.S
3  *
4  *  Copyright (C) 2004 ARM Limited.
5  *  Written by Deep Blue Solutions Limited.
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2 as
9  * published by the Free Software Foundation.
10  *
11  * This code is called from the kernel's undefined instruction trap.
12  * r9 holds the return address for successful handling.
13  * lr holds the return address for unrecognised instructions.
14  * r10 points at the start of the private FP workspace in the thread structure
15  * sp points to a struct pt_regs (as defined in include/asm/proc/ptrace.h)
16  */
17 #include <asm/thread_info.h>
18 #include <asm/vfpmacros.h>
19 #include "../kernel/entry-header.S"
20
21         .macro  DBGSTR, str
22 #ifdef DEBUG
23         stmfd   sp!, {r0-r3, ip, lr}
24         add     r0, pc, #4
25         bl      printk
26         b       1f
27         .asciz  "<7>VFP: \str\n"
28         .balign 4
29 1:      ldmfd   sp!, {r0-r3, ip, lr}
30 #endif
31         .endm
32
33         .macro  DBGSTR1, str, arg
34 #ifdef DEBUG
35         stmfd   sp!, {r0-r3, ip, lr}
36         mov     r1, \arg
37         add     r0, pc, #4
38         bl      printk
39         b       1f
40         .asciz  "<7>VFP: \str\n"
41         .balign 4
42 1:      ldmfd   sp!, {r0-r3, ip, lr}
43 #endif
44         .endm
45
46         .macro  DBGSTR3, str, arg1, arg2, arg3
47 #ifdef DEBUG
48         stmfd   sp!, {r0-r3, ip, lr}
49         mov     r3, \arg3
50         mov     r2, \arg2
51         mov     r1, \arg1
52         add     r0, pc, #4
53         bl      printk
54         b       1f
55         .asciz  "<7>VFP: \str\n"
56         .balign 4
57 1:      ldmfd   sp!, {r0-r3, ip, lr}
58 #endif
59         .endm
60
61
62 @ VFP hardware support entry point.
63 @
64 @  r0  = faulted instruction
65 @  r2  = faulted PC+4
66 @  r9  = successful return
67 @  r10 = vfp_state union
68 @  r11 = CPU number
69 @  lr  = failure return
70
71         .globl  vfp_support_entry
72 vfp_support_entry:
73         DBGSTR3 "instr %08x pc %08x state %p", r0, r2, r10
74
75         VFPFMRX r1, FPEXC               @ Is the VFP enabled?
76         DBGSTR1 "fpexc %08x", r1
77         tst     r1, #FPEXC_ENABLE
78         bne     look_for_VFP_exceptions @ VFP is already enabled
79
80         DBGSTR1 "enable %x", r10
81         ldr     r3, last_VFP_context_address
82         orr     r1, r1, #FPEXC_ENABLE   @ user FPEXC has the enable bit set
83         ldr     r4, [r3, r11, lsl #2]   @ last_VFP_context pointer
84         bic     r5, r1, #FPEXC_EXCEPTION @ make sure exceptions are disabled
85         cmp     r4, r10
86         beq     check_for_exception     @ we are returning to the same
87                                         @ process, so the registers are
88                                         @ still there.  In this case, we do
89                                         @ not want to drop a pending exception.
90
91         VFPFMXR FPEXC, r5               @ enable VFP, disable any pending
92                                         @ exceptions, so we can get at the
93                                         @ rest of it
94
95 #ifndef CONFIG_SMP
96         @ Save out the current registers to the old thread state
97         @ No need for SMP since this is not done lazily
98
99         DBGSTR1 "save old state %p", r4
100         cmp     r4, #0
101         beq     no_old_VFP_process
102         VFPFMRX r5, FPSCR               @ current status
103         VFPFMRX r6, FPINST              @ FPINST (always there, rev0 onwards)
104         tst     r1, #FPEXC_FPV2         @ is there an FPINST2 to read?
105         VFPFMRX r8, FPINST2, NE         @ FPINST2 if needed - avoids reading
106                                         @ nonexistant reg on rev0
107         VFPFSTMIA r4                    @ save the working registers
108         stmia   r4, {r1, r5, r6, r8}    @ save FPEXC, FPSCR, FPINST, FPINST2
109                                         @ and point r4 at the word at the
110                                         @ start of the register dump
111 #endif
112
113 no_old_VFP_process:
114         DBGSTR1 "load state %p", r10
115         str     r10, [r3, r11, lsl #2]  @ update the last_VFP_context pointer
116                                         @ Load the saved state back into the VFP
117         VFPFLDMIA r10                   @ reload the working registers while
118                                         @ FPEXC is in a safe state
119         ldmia   r10, {r1, r5, r6, r8}   @ load FPEXC, FPSCR, FPINST, FPINST2
120         tst     r1, #FPEXC_FPV2         @ is there an FPINST2 to write?
121         VFPFMXR FPINST2, r8, NE         @ FPINST2 if needed - avoids writing
122                                         @ nonexistant reg on rev0
123         VFPFMXR FPINST, r6
124         VFPFMXR FPSCR, r5               @ restore status
125
126 check_for_exception:
127         tst     r1, #FPEXC_EXCEPTION
128         bne     process_exception       @ might as well handle the pending
129                                         @ exception before retrying branch
130                                         @ out before setting an FPEXC that
131                                         @ stops us reading stuff
132         VFPFMXR FPEXC, r1               @ restore FPEXC last
133         sub     r2, r2, #4
134         str     r2, [sp, #S_PC]         @ retry the instruction
135         mov     pc, r9                  @ we think we have handled things
136
137
138 look_for_VFP_exceptions:
139         tst     r1, #FPEXC_EXCEPTION
140         bne     process_exception
141         VFPFMRX r5, FPSCR
142         tst     r5, #FPSCR_IXE          @ IXE doesn't set FPEXC_EXCEPTION !
143         bne     process_exception
144
145         @ Fall into hand on to next handler - appropriate coproc instr
146         @ not recognised by VFP
147
148         DBGSTR  "not VFP"
149         mov     pc, lr
150
151 process_exception:
152         DBGSTR  "bounce"
153         sub     r2, r2, #4
154         str     r2, [sp, #S_PC]         @ retry the instruction on exit from
155                                         @ the imprecise exception handling in
156                                         @ the support code
157         mov     r2, sp                  @ nothing stacked - regdump is at TOS
158         mov     lr, r9                  @ setup for a return to the user code.
159
160         @ Now call the C code to package up the bounce to the support code
161         @   r0 holds the trigger instruction
162         @   r1 holds the FPEXC value
163         @   r2 pointer to register dump
164         b       VFP9_bounce             @ we have handled this - the support
165                                         @ code will raise an exception if
166                                         @ required. If not, the user code will
167                                         @ retry the faulted instruction
168
169 #ifdef CONFIG_SMP
170         .globl  vfp_save_state
171         .type   vfp_save_state, %function
172 vfp_save_state:
173         @ Save the current VFP state
174         @ r0 - save location
175         @ r1 - FPEXC
176         DBGSTR1 "save VFP state %p", r0
177         VFPFMRX r2, FPSCR               @ current status
178         VFPFMRX r3, FPINST              @ FPINST (always there, rev0 onwards)
179         tst     r1, #FPEXC_FPV2         @ is there an FPINST2 to read?
180         VFPFMRX r12, FPINST2, NE        @ FPINST2 if needed - avoids reading
181                                         @ nonexistant reg on rev0
182         VFPFSTMIA r0                    @ save the working registers
183         stmia   r0, {r1, r2, r3, r12}   @ save FPEXC, FPSCR, FPINST, FPINST2
184         mov     pc, lr
185 #endif
186
187 last_VFP_context_address:
188         .word   last_VFP_context
189
190         .globl  vfp_get_float
191 vfp_get_float:
192         add     pc, pc, r0, lsl #3
193         mov     r0, r0
194         .irp    dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
195         mrc     p10, 0, r0, c\dr, c0, 0 @ fmrs  r0, s0
196         mov     pc, lr
197         mrc     p10, 0, r0, c\dr, c0, 4 @ fmrs  r0, s1
198         mov     pc, lr
199         .endr
200
201         .globl  vfp_put_float
202 vfp_put_float:
203         add     pc, pc, r1, lsl #3
204         mov     r0, r0
205         .irp    dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
206         mcr     p10, 0, r0, c\dr, c0, 0 @ fmsr  r0, s0
207         mov     pc, lr
208         mcr     p10, 0, r0, c\dr, c0, 4 @ fmsr  r0, s1
209         mov     pc, lr
210         .endr
211
212         .globl  vfp_get_double
213 vfp_get_double:
214         add     pc, pc, r0, lsl #3
215         mov     r0, r0
216         .irp    dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
217         fmrrd   r0, r1, d\dr
218         mov     pc, lr
219         .endr
220
221         @ virtual register 16 for compare with zero
222         mov     r0, #0
223         mov     r1, #0
224         mov     pc, lr
225
226         .globl  vfp_put_double
227 vfp_put_double:
228         add     pc, pc, r2, lsl #3
229         mov     r0, r0
230         .irp    dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
231         fmdrr   d\dr, r0, r1
232         mov     pc, lr
233         .endr