arch/arm/mach-pxa/corgi_lcd.c

   1 /*
   2  * linux/arch/arm/mach-pxa/corgi_lcd.c
   3  *
   4  * Corgi/Spitz LCD Specific Code
   5  *
   6  * Copyright (C) 2005 Richard Purdie
   7  *
   8  * Connectivity:
   9  *   Corgi - LCD to ATI Imageon w100 (Wallaby)
  10  *   Spitz - LCD to PXA Framebuffer
  11  *
  12  * This program is free software; you can redistribute it and/or modify
  13  * it under the terms of the GNU General Public License version 2 as
  14  * published by the Free Software Foundation.
  15  *
  16  */
  17
  18 #include <linux/delay.h>
  19 #include <linux/kernel.h>
  20 #include <linux/platform_device.h>
  21 #include <linux/module.h>
  22 #include <linux/string.h>
  23 #include <asm/arch/akita.h>
  24 #include <asm/arch/corgi.h>
  25 #include <asm/hardware.h>
  26 #include <asm/arch/pxa-regs.h>
  27 #include <asm/arch/sharpsl.h>
  28 #include <asm/arch/spitz.h>
  29 #include <asm/hardware/scoop.h>
  30 #include <asm/mach/sharpsl_param.h>
  31 #include "generic.h"
  32
  33 /* Register Addresses */
  34 #define RESCTL_ADRS     0x00
  35 #define PHACTRL_ADRS    0x01
  36 #define DUTYCTRL_ADRS   0x02
  37 #define POWERREG0_ADRS  0x03
  38 #define POWERREG1_ADRS  0x04
  39 #define GPOR3_ADRS      0x05
  40 #define PICTRL_ADRS     0x06
  41 #define POLCTRL_ADRS    0x07
  42
  43 /* Resgister Bit Definitions */
  44 #define RESCTL_QVGA     0x01
  45 #define RESCTL_VGA      0x00
  46
  47 #define POWER1_VW_ON    0x01  /* VW Supply FET ON */
  48 #define POWER1_GVSS_ON  0x02  /* GVSS(-8V) Power Supply ON */
  49 #define POWER1_VDD_ON   0x04  /* VDD(8V),SVSS(-4V) Power Supply ON */
  50
  51 #define POWER1_VW_OFF   0x00  /* VW Supply FET OFF */
  52 #define POWER1_GVSS_OFF 0x00  /* GVSS(-8V) Power Supply OFF */
  53 #define POWER1_VDD_OFF  0x00  /* VDD(8V),SVSS(-4V) Power Supply OFF */
  54
  55 #define POWER0_COM_DCLK 0x01  /* COM Voltage DC Bias DAC Serial Data Clock */
  56 #define POWER0_COM_DOUT 0x02  /* COM Voltage DC Bias DAC Serial Data Out */
  57 #define POWER0_DAC_ON   0x04  /* DAC Power Supply ON */
  58 #define POWER0_COM_ON   0x08  /* COM Powewr Supply ON */
  59 #define POWER0_VCC5_ON  0x10  /* VCC5 Power Supply ON */
  60
  61 #define POWER0_DAC_OFF  0x00  /* DAC Power Supply OFF */
  62 #define POWER0_COM_OFF  0x00  /* COM Powewr Supply OFF */
  63 #define POWER0_VCC5_OFF 0x00  /* VCC5 Power Supply OFF */
  64
  65 #define PICTRL_INIT_STATE      0x01
  66 #define PICTRL_INIOFF          0x02
  67 #define PICTRL_POWER_DOWN      0x04
  68 #define PICTRL_COM_SIGNAL_OFF  0x08
  69 #define PICTRL_DAC_SIGNAL_OFF  0x10
  70
  71 #define POLCTRL_SYNC_POL_FALL  0x01
  72 #define POLCTRL_EN_POL_FALL    0x02
  73 #define POLCTRL_DATA_POL_FALL  0x04
  74 #define POLCTRL_SYNC_ACT_H     0x08
  75 #define POLCTRL_EN_ACT_L       0x10
  76
  77 #define POLCTRL_SYNC_POL_RISE  0x00
  78 #define POLCTRL_EN_POL_RISE    0x00
  79 #define POLCTRL_DATA_POL_RISE  0x00
  80 #define POLCTRL_SYNC_ACT_L     0x00
  81 #define POLCTRL_EN_ACT_H       0x00
  82
  83 #define PHACTRL_PHASE_MANUAL   0x01
  84 #define DEFAULT_PHAD_QVGA     (9)
  85 #define DEFAULT_COMADJ        (125)
  86
  87 /*
  88  * This is only a psuedo I2C interface. We can't use the standard kernel
  89  * routines as the interface is write only. We just assume the data is acked...
  90  */
  91 static void lcdtg_ssp_i2c_send(u8 data)
  92 {
  93         corgi_ssp_lcdtg_send(POWERREG0_ADRS, data);
  94         udelay(10);
  95 }
  96
  97 static void lcdtg_i2c_send_bit(u8 data)
  98 {
  99         lcdtg_ssp_i2c_send(data);
 100         lcdtg_ssp_i2c_send(data | POWER0_COM_DCLK);
 101         lcdtg_ssp_i2c_send(data);
 102 }
 103
 104 static void lcdtg_i2c_send_start(u8 base)
 105 {
 106         lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
 107         lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
 108         lcdtg_ssp_i2c_send(base);
 109 }
 110
 111 static void lcdtg_i2c_send_stop(u8 base)
 112 {
 113         lcdtg_ssp_i2c_send(base);
 114         lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
 115         lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
 116 }
 117
 118 static void lcdtg_i2c_send_byte(u8 base, u8 data)
 119 {
 120         int i;
 121         for (i = 0; i < 8; i++) {
 122                 if (data & 0x80)
 123                         lcdtg_i2c_send_bit(base | POWER0_COM_DOUT);
 124                 else
 125                         lcdtg_i2c_send_bit(base);
 126                 data <<= 1;
 127         }
 128 }
 129
 130 static void lcdtg_i2c_wait_ack(u8 base)
 131 {
 132         lcdtg_i2c_send_bit(base);
 133 }
 134
 135 static void lcdtg_set_common_voltage(u8 base_data, u8 data)
 136 {
 137         /* Set Common Voltage to M62332FP via I2C */
 138         lcdtg_i2c_send_start(base_data);
 139         lcdtg_i2c_send_byte(base_data, 0x9c);
 140         lcdtg_i2c_wait_ack(base_data);
 141         lcdtg_i2c_send_byte(base_data, 0x00);
 142         lcdtg_i2c_wait_ack(base_data);
 143         lcdtg_i2c_send_byte(base_data, data);
 144         lcdtg_i2c_wait_ack(base_data);
 145         lcdtg_i2c_send_stop(base_data);
 146 }
 147
 148 /* Set Phase Adjuct */
 149 static void lcdtg_set_phadadj(int mode)
 150 {
 151         int adj;
 152         switch(mode) {
 153                 case 480:
 154                 case 640:
 155                         /* Setting for VGA */
 156                         adj = sharpsl_param.phadadj;
 157                         if (adj < 0) {
 158                                 adj = PHACTRL_PHASE_MANUAL;
 159                         } else {
 160                                 adj = ((adj & 0x0f) << 1) | PHACTRL_PHASE_MANUAL;
 161                         }
 162                         break;
 163                 case 240:
 164                 case 320:
 165                 default:
 166                         /* Setting for QVGA */
 167                         adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL;
 168                         break;
 169         }
 170
 171         corgi_ssp_lcdtg_send(PHACTRL_ADRS, adj);
 172 }
 173
 174 static int lcd_inited;
 175
 176 static void lcdtg_hw_init(int mode)
 177 {
 178         if (!lcd_inited) {
 179                 int comadj;
 180
 181                 /* Initialize Internal Logic & Port */
 182                 corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_POWER_DOWN | PICTRL_INIOFF | PICTRL_INIT_STATE
 183                                 | PICTRL_COM_SIGNAL_OFF | PICTRL_DAC_SIGNAL_OFF);
 184
 185                 corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF
 186                                 | POWER0_COM_OFF | POWER0_VCC5_OFF);
 187
 188                 corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
 189
 190                 /* VDD(+8V), SVSS(-4V) ON */
 191                 corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
 192                 mdelay(3);
 193
 194                 /* DAC ON */
 195                 corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
 196                                 | POWER0_COM_OFF | POWER0_VCC5_OFF);
 197
 198                 /* INIB = H, INI = L  */
 199                 /* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */
 200                 corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF);
 201
 202                 /* Set Common Voltage */
 203                 comadj = sharpsl_param.comadj;
 204                 if (comadj < 0)
 205                         comadj = DEFAULT_COMADJ;
 206                 lcdtg_set_common_voltage((POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF), comadj);
 207
 208                 /* VCC5 ON, DAC ON */
 209                 corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
 210                                 POWER0_COM_OFF | POWER0_VCC5_ON);
 211
 212                 /* GVSS(-8V) ON, VDD ON */
 213                 corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
 214                 mdelay(2);
 215
 216                 /* COM SIGNAL ON (PICTL[3] = L) */
 217                 corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE);
 218
 219                 /* COM ON, DAC ON, VCC5_ON */
 220                 corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
 221                                 | POWER0_COM_ON | POWER0_VCC5_ON);
 222
 223                 /* VW ON, GVSS ON, VDD ON */
 224                 corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON);
 225
 226                 /* Signals output enable */
 227                 corgi_ssp_lcdtg_send(PICTRL_ADRS, 0);
 228
 229                 /* Set Phase Adjuct */
 230                 lcdtg_set_phadadj(mode);
 231
 232                 /* Initialize for Input Signals from ATI */
 233                 corgi_ssp_lcdtg_send(POLCTRL_ADRS, POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE
 234                                 | POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L | POLCTRL_EN_ACT_H);
 235                 udelay(1000);
 236
 237                 lcd_inited=1;
 238         } else {
 239                 lcdtg_set_phadadj(mode);
 240         }
 241
 242         switch(mode) {
 243                 case 480:
 244                 case 640:
 245                         /* Set Lcd Resolution (VGA) */
 246                         corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_VGA);
 247                         break;
 248                 case 240:
 249                 case 320:
 250                 default:
 251                         /* Set Lcd Resolution (QVGA) */
 252                         corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_QVGA);
 253                         break;
 254         }
 255 }
 256
 257 static void lcdtg_suspend(void)
 258 {
 259         /* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */
 260         mdelay(34);
 261
 262         /* (1)VW OFF */
 263         corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
 264
 265         /* (2)COM OFF */
 266         corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF);
 267         corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON);
 268
 269         /* (3)Set Common Voltage Bias 0V */
 270         lcdtg_set_common_voltage(POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON, 0);
 271
 272         /* (4)GVSS OFF */
 273         corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
 274
 275         /* (5)VCC5 OFF */
 276         corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF);
 277
 278         /* (6)Set PDWN, INIOFF, DACOFF */
 279         corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF |
 280                         PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF);
 281
 282         /* (7)DAC OFF */
 283         corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF);
 284
 285         /* (8)VDD OFF */
 286         corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
 287
 288         lcd_inited = 0;
 289 }
 290
 291
 292 /*
 293  * Corgi w100 Frame Buffer Device
 294  */
 295 #ifdef CONFIG_PXA_SHARP_C7xx
 296
 297 #include <video/w100fb.h>
 298
 299 static void w100_lcdtg_suspend(struct w100fb_par *par)
 300 {
 301         lcdtg_suspend();
 302 }
 303
 304 static void w100_lcdtg_init(struct w100fb_par *par)
 305 {
 306         lcdtg_hw_init(par->xres);
 307 }
 308
 309
 310 static struct w100_tg_info corgi_lcdtg_info = {
 311         .change  = w100_lcdtg_init,
 312         .suspend = w100_lcdtg_suspend,
 313         .resume  = w100_lcdtg_init,
 314 };
 315
 316 static struct w100_mem_info corgi_fb_mem = {
 317         .ext_cntl          = 0x00040003,
 318         .sdram_mode_reg    = 0x00650021,
 319         .ext_timing_cntl   = 0x10002a4a,
 320         .io_cntl           = 0x7ff87012,
 321         .size              = 0x1fffff,
 322 };
 323
 324 static struct w100_gen_regs corgi_fb_regs = {
 325         .lcd_format    = 0x00000003,
 326         .lcdd_cntl1    = 0x01CC0000,
 327         .lcdd_cntl2    = 0x0003FFFF,
 328         .genlcd_cntl1  = 0x00FFFF0D,
 329         .genlcd_cntl2  = 0x003F3003,
 330         .genlcd_cntl3  = 0x000102aa,
 331 };
 332
 333 static struct w100_gpio_regs corgi_fb_gpio = {
 334         .init_data1   = 0x000000bf,
 335         .init_data2   = 0x00000000,
 336         .gpio_dir1    = 0x00000000,
 337         .gpio_oe1     = 0x03c0feff,
 338         .gpio_dir2    = 0x00000000,
 339         .gpio_oe2     = 0x00000000,
 340 };
 341
 342 static struct w100_mode corgi_fb_modes[] = {
 343 {
 344         .xres            = 480,
 345         .yres            = 640,
 346         .left_margin     = 0x56,
 347         .right_margin    = 0x55,
 348         .upper_margin    = 0x03,
 349         .lower_margin    = 0x00,
 350         .crtc_ss         = 0x82360056,
 351         .crtc_ls         = 0xA0280000,
 352         .crtc_gs         = 0x80280028,
 353         .crtc_vpos_gs    = 0x02830002,
 354         .crtc_rev        = 0x00400008,
 355         .crtc_dclk       = 0xA0000000,
 356         .crtc_gclk       = 0x8015010F,
 357         .crtc_goe        = 0x80100110,
 358         .crtc_ps1_active = 0x41060010,
 359         .pll_freq        = 75,
 360         .fast_pll_freq   = 100,
 361         .sysclk_src      = CLK_SRC_PLL,
 362         .sysclk_divider  = 0,
 363         .pixclk_src      = CLK_SRC_PLL,
 364         .pixclk_divider  = 2,
 365         .pixclk_divider_rotated = 6,
 366 },{
 367         .xres            = 240,
 368         .yres            = 320,
 369         .left_margin     = 0x27,
 370         .right_margin    = 0x2e,
 371         .upper_margin    = 0x01,
 372         .lower_margin    = 0x00,
 373         .crtc_ss         = 0x81170027,
 374         .crtc_ls         = 0xA0140000,
 375         .crtc_gs         = 0xC0140014,
 376         .crtc_vpos_gs    = 0x00010141,
 377         .crtc_rev        = 0x00400008,
 378         .crtc_dclk       = 0xA0000000,
 379         .crtc_gclk       = 0x8015010F,
 380         .crtc_goe        = 0x80100110,
 381         .crtc_ps1_active = 0x41060010,
 382         .pll_freq        = 0,
 383         .fast_pll_freq   = 0,
 384         .sysclk_src      = CLK_SRC_XTAL,
 385         .sysclk_divider  = 0,
 386         .pixclk_src      = CLK_SRC_XTAL,
 387         .pixclk_divider  = 1,
 388         .pixclk_divider_rotated = 1,
 389 },
 390
 391 };
 392
 393 static struct w100fb_mach_info corgi_fb_info = {
 394         .tg         = &corgi_lcdtg_info,
 395         .init_mode  = INIT_MODE_ROTATED,
 396         .mem        = &corgi_fb_mem,
 397         .regs       = &corgi_fb_regs,
 398         .modelist   = &corgi_fb_modes[0],
 399         .num_modes  = 2,
 400         .gpio       = &corgi_fb_gpio,
 401         .xtal_freq  = 12500000,
 402         .xtal_dbl   = 0,
 403 };
 404
 405 static struct resource corgi_fb_resources[] = {
 406         [0] = {
 407                 .start   = 0x08000000,
 408                 .end     = 0x08ffffff,
 409                 .flags   = IORESOURCE_MEM,
 410         },
 411 };
 412
 413 struct platform_device corgifb_device = {
 414         .name           = "w100fb",
 415         .id             = -1,
 416         .num_resources  = ARRAY_SIZE(corgi_fb_resources),
 417         .resource       = corgi_fb_resources,
 418         .dev            = {
 419                 .platform_data = &corgi_fb_info,
 420                 .parent = &corgissp_device.dev,
 421         },
 422
 423 };
 424 #endif
 425
 426
 427 /*
 428  * Spitz PXA Frame Buffer Device
 429  */
 430 #ifdef CONFIG_PXA_SHARP_Cxx00
 431
 432 #include <asm/arch/pxafb.h>
 433
 434 void spitz_lcd_power(int on, struct fb_var_screeninfo *var)
 435 {
 436         if (on)
 437                 lcdtg_hw_init(var->xres);
 438         else
 439                 lcdtg_suspend();
 440 }
 441
 442 #endif
 443
 444
 445 /*
 446  * Corgi/Spitz Touchscreen to LCD interface
 447  */
 448 static unsigned long (*get_hsync_time)(struct device *dev);
 449
 450 static void inline sharpsl_wait_sync(int gpio)
 451 {
 452         while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
 453         while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
 454 }
 455
 456 #ifdef CONFIG_PXA_SHARP_C7xx
 457 unsigned long corgi_get_hsync_len(void)
 458 {
 459         if (!get_hsync_time)
 460                 get_hsync_time = symbol_get(w100fb_get_hsynclen);
 461         if (!get_hsync_time)
 462                 return 0;
 463
 464         return get_hsync_time(&corgifb_device.dev);
 465 }
 466
 467 void corgi_put_hsync(void)
 468 {
 469         if (get_hsync_time)
 470                 symbol_put(w100fb_get_hsynclen);
 471         get_hsync_time = NULL;
 472 }
 473
 474 void corgi_wait_hsync(void)
 475 {
 476         sharpsl_wait_sync(CORGI_GPIO_HSYNC);
 477 }
 478 #endif
 479
 480 #ifdef CONFIG_PXA_SHARP_Cxx00
 481 static struct device *spitz_pxafb_dev;
 482
 483 static int is_pxafb_device(struct device * dev, void * data)
 484 {
 485         struct platform_device *pdev = container_of(dev, struct platform_device, dev);
 486
 487         return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0);
 488 }
 489
 490 unsigned long spitz_get_hsync_len(void)
 491 {
 492 #ifdef CONFIG_FB_PXA
 493         if (!spitz_pxafb_dev) {
 494                 spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
 495                 if (!spitz_pxafb_dev)
 496                         return 0;
 497         }
 498         if (!get_hsync_time)
 499                 get_hsync_time = symbol_get(pxafb_get_hsync_time);
 500         if (!get_hsync_time)
 501 #endif
 502                 return 0;
 503
 504         return pxafb_get_hsync_time(spitz_pxafb_dev);
 505 }
 506
 507 void spitz_put_hsync(void)
 508 {
 509         put_device(spitz_pxafb_dev);
 510         if (get_hsync_time)
 511                 symbol_put(pxafb_get_hsync_time);
 512         spitz_pxafb_dev = NULL;
 513         get_hsync_time = NULL;
 514 }
 515
 516 void spitz_wait_hsync(void)
 517 {
 518         sharpsl_wait_sync(SPITZ_GPIO_HSYNC);
 519 }
 520 #endif
 521
 522 /*
 523  * Corgi/Spitz Backlight Power
 524  */
 525 #ifdef CONFIG_PXA_SHARP_C7xx
 526 void corgi_bl_set_intensity(int intensity)
 527 {
 528         if (intensity > 0x10)
 529                 intensity += 0x10;
 530
 531         /* Bits 0-4 are accessed via the SSP interface */
 532         corgi_ssp_blduty_set(intensity & 0x1f);
 533
 534         /* Bit 5 is via SCOOP */
 535         if (intensity & 0x0020)
 536                 set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
 537         else
 538                 reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
 539 }
 540 #endif
 541
 542
 543 #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
 544 void spitz_bl_set_intensity(int intensity)
 545 {
 546         if (intensity > 0x10)
 547                 intensity += 0x10;
 548
 549         /* Bits 0-4 are accessed via the SSP interface */
 550         corgi_ssp_blduty_set(intensity & 0x1f);
 551
 552         /* Bit 5 is via SCOOP */
 553         if (intensity & 0x0020)
 554                 reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
 555         else
 556                 set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
 557
 558         if (intensity)
 559                 set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
 560         else
 561                 reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
 562 }
 563 #endif
 564
 565 #ifdef CONFIG_MACH_AKITA
 566 void akita_bl_set_intensity(int intensity)
 567 {
 568         if (intensity > 0x10)
 569                 intensity += 0x10;
 570
 571         /* Bits 0-4 are accessed via the SSP interface */
 572         corgi_ssp_blduty_set(intensity & 0x1f);
 573
 574         /* Bit 5 is via IO-Expander */
 575         if (intensity & 0x0020)
 576                 akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
 577         else
 578                 akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
 579
 580         if (intensity)
 581                 akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
 582         else
 583                 akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
 584 }
 585 #endif