arch/arm/mach-omap2/usb-host.c

   1 /*
   2  * usb-host.c - OMAP USB Host
   3  *
   4  * This file will contain the board specific details for the
   5  * Synopsys EHCI/OHCI host controller on OMAP3430 and onwards
   6  *
   7  * Copyright (C) 2007-2011 Texas Instruments
   8  * Author: Vikram Pandita <vikram.pandita@ti.com>
   9  * Author: Keshava Munegowda <keshava_mgowda@ti.com>
  10  *
  11  * Generalization by:
  12  * Felipe Balbi <balbi@ti.com>
  13  *
  14  * This program is free software; you can redistribute it and/or modify
  15  * it under the terms of the GNU General Public License version 2 as
  16  * published by the Free Software Foundation.
  17  */
  18
  19 #include <linux/types.h>
  20 #include <linux/errno.h>
  21 #include <linux/delay.h>
  22 #include <linux/platform_device.h>
  23 #include <linux/slab.h>
  24 #include <linux/dma-mapping.h>
  25 #include <linux/regulator/machine.h>
  26 #include <linux/regulator/fixed.h>
  27 #include <linux/string.h>
  28 #include <linux/io.h>
  29 #include <linux/gpio.h>
  30 #include <linux/usb/phy.h>
  31 #include <linux/usb/usb_phy_gen_xceiv.h>
  32
  33 #include "soc.h"
  34 #include "omap_device.h"
  35 #include "mux.h"
  36 #include "usb.h"
  37
  38 #ifdef CONFIG_MFD_OMAP_USB_HOST
  39
  40 #define OMAP_USBHS_DEVICE       "usbhs_omap"
  41 #define OMAP_USBTLL_DEVICE      "usbhs_tll"
  42 #define USBHS_UHH_HWMODNAME     "usb_host_hs"
  43 #define USBHS_TLL_HWMODNAME     "usb_tll_hs"
  44
  45 /* MUX settings for EHCI pins */
  46 /*
  47  * setup_ehci_io_mux - initialize IO pad mux for USBHOST
  48  */
  49 static void __init setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
  50 {
  51         switch (port_mode[0]) {
  52         case OMAP_EHCI_PORT_MODE_PHY:
  53                 omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT);
  54                 omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT);
  55                 omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN);
  56                 omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN);
  57                 omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN);
  58                 omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN);
  59                 omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN);
  60                 omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN);
  61                 omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN);
  62                 omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN);
  63                 omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN);
  64                 omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN);
  65                 break;
  66         case OMAP_EHCI_PORT_MODE_TLL:
  67                 omap_mux_init_signal("hsusb1_tll_stp",
  68                         OMAP_PIN_INPUT_PULLUP);
  69                 omap_mux_init_signal("hsusb1_tll_clk",
  70                         OMAP_PIN_INPUT_PULLDOWN);
  71                 omap_mux_init_signal("hsusb1_tll_dir",
  72                         OMAP_PIN_INPUT_PULLDOWN);
  73                 omap_mux_init_signal("hsusb1_tll_nxt",
  74                         OMAP_PIN_INPUT_PULLDOWN);
  75                 omap_mux_init_signal("hsusb1_tll_data0",
  76                         OMAP_PIN_INPUT_PULLDOWN);
  77                 omap_mux_init_signal("hsusb1_tll_data1",
  78                         OMAP_PIN_INPUT_PULLDOWN);
  79                 omap_mux_init_signal("hsusb1_tll_data2",
  80                         OMAP_PIN_INPUT_PULLDOWN);
  81                 omap_mux_init_signal("hsusb1_tll_data3",
  82                         OMAP_PIN_INPUT_PULLDOWN);
  83                 omap_mux_init_signal("hsusb1_tll_data4",
  84                         OMAP_PIN_INPUT_PULLDOWN);
  85                 omap_mux_init_signal("hsusb1_tll_data5",
  86                         OMAP_PIN_INPUT_PULLDOWN);
  87                 omap_mux_init_signal("hsusb1_tll_data6",
  88                         OMAP_PIN_INPUT_PULLDOWN);
  89                 omap_mux_init_signal("hsusb1_tll_data7",
  90                         OMAP_PIN_INPUT_PULLDOWN);
  91                 break;
  92         case OMAP_USBHS_PORT_MODE_UNUSED:
  93                 /* FALLTHROUGH */
  94         default:
  95                 break;
  96         }
  97
  98         switch (port_mode[1]) {
  99         case OMAP_EHCI_PORT_MODE_PHY:
 100                 omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT);
 101                 omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT);
 102                 omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN);
 103                 omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN);
 104                 omap_mux_init_signal("hsusb2_data0",
 105                         OMAP_PIN_INPUT_PULLDOWN);
 106                 omap_mux_init_signal("hsusb2_data1",
 107                         OMAP_PIN_INPUT_PULLDOWN);
 108                 omap_mux_init_signal("hsusb2_data2",
 109                         OMAP_PIN_INPUT_PULLDOWN);
 110                 omap_mux_init_signal("hsusb2_data3",
 111                         OMAP_PIN_INPUT_PULLDOWN);
 112                 omap_mux_init_signal("hsusb2_data4",
 113                         OMAP_PIN_INPUT_PULLDOWN);
 114                 omap_mux_init_signal("hsusb2_data5",
 115                         OMAP_PIN_INPUT_PULLDOWN);
 116                 omap_mux_init_signal("hsusb2_data6",
 117                         OMAP_PIN_INPUT_PULLDOWN);
 118                 omap_mux_init_signal("hsusb2_data7",
 119                         OMAP_PIN_INPUT_PULLDOWN);
 120                 break;
 121         case OMAP_EHCI_PORT_MODE_TLL:
 122                 omap_mux_init_signal("hsusb2_tll_stp",
 123                         OMAP_PIN_INPUT_PULLUP);
 124                 omap_mux_init_signal("hsusb2_tll_clk",
 125                         OMAP_PIN_INPUT_PULLDOWN);
 126                 omap_mux_init_signal("hsusb2_tll_dir",
 127                         OMAP_PIN_INPUT_PULLDOWN);
 128                 omap_mux_init_signal("hsusb2_tll_nxt",
 129                         OMAP_PIN_INPUT_PULLDOWN);
 130                 omap_mux_init_signal("hsusb2_tll_data0",
 131                         OMAP_PIN_INPUT_PULLDOWN);
 132                 omap_mux_init_signal("hsusb2_tll_data1",
 133                         OMAP_PIN_INPUT_PULLDOWN);
 134                 omap_mux_init_signal("hsusb2_tll_data2",
 135                         OMAP_PIN_INPUT_PULLDOWN);
 136                 omap_mux_init_signal("hsusb2_tll_data3",
 137                         OMAP_PIN_INPUT_PULLDOWN);
 138                 omap_mux_init_signal("hsusb2_tll_data4",
 139                         OMAP_PIN_INPUT_PULLDOWN);
 140                 omap_mux_init_signal("hsusb2_tll_data5",
 141                         OMAP_PIN_INPUT_PULLDOWN);
 142                 omap_mux_init_signal("hsusb2_tll_data6",
 143                         OMAP_PIN_INPUT_PULLDOWN);
 144                 omap_mux_init_signal("hsusb2_tll_data7",
 145                         OMAP_PIN_INPUT_PULLDOWN);
 146                 break;
 147         case OMAP_USBHS_PORT_MODE_UNUSED:
 148                 /* FALLTHROUGH */
 149         default:
 150                 break;
 151         }
 152
 153         switch (port_mode[2]) {
 154         case OMAP_EHCI_PORT_MODE_PHY:
 155                 printk(KERN_WARNING "Port3 can't be used in PHY mode\n");
 156                 break;
 157         case OMAP_EHCI_PORT_MODE_TLL:
 158                 omap_mux_init_signal("hsusb3_tll_stp",
 159                         OMAP_PIN_INPUT_PULLUP);
 160                 omap_mux_init_signal("hsusb3_tll_clk",
 161                         OMAP_PIN_INPUT_PULLDOWN);
 162                 omap_mux_init_signal("hsusb3_tll_dir",
 163                         OMAP_PIN_INPUT_PULLDOWN);
 164                 omap_mux_init_signal("hsusb3_tll_nxt",
 165                         OMAP_PIN_INPUT_PULLDOWN);
 166                 omap_mux_init_signal("hsusb3_tll_data0",
 167                         OMAP_PIN_INPUT_PULLDOWN);
 168                 omap_mux_init_signal("hsusb3_tll_data1",
 169                         OMAP_PIN_INPUT_PULLDOWN);
 170                 omap_mux_init_signal("hsusb3_tll_data2",
 171                         OMAP_PIN_INPUT_PULLDOWN);
 172                 omap_mux_init_signal("hsusb3_tll_data3",
 173                         OMAP_PIN_INPUT_PULLDOWN);
 174                 omap_mux_init_signal("hsusb3_tll_data4",
 175                         OMAP_PIN_INPUT_PULLDOWN);
 176                 omap_mux_init_signal("hsusb3_tll_data5",
 177                         OMAP_PIN_INPUT_PULLDOWN);
 178                 omap_mux_init_signal("hsusb3_tll_data6",
 179                         OMAP_PIN_INPUT_PULLDOWN);
 180                 omap_mux_init_signal("hsusb3_tll_data7",
 181                         OMAP_PIN_INPUT_PULLDOWN);
 182                 break;
 183         case OMAP_USBHS_PORT_MODE_UNUSED:
 184                 /* FALLTHROUGH */
 185         default:
 186                 break;
 187         }
 188
 189         return;
 190 }
 191
 192 static void __init setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 193 {
 194         switch (port_mode[0]) {
 195         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 196         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 197         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 198         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 199                 omap_mux_init_signal("mm1_rxdp",
 200                         OMAP_PIN_INPUT_PULLDOWN);
 201                 omap_mux_init_signal("mm1_rxdm",
 202                         OMAP_PIN_INPUT_PULLDOWN);
 203                 /* FALLTHROUGH */
 204         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 205         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 206                 omap_mux_init_signal("mm1_rxrcv",
 207                         OMAP_PIN_INPUT_PULLDOWN);
 208                 /* FALLTHROUGH */
 209         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 210         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 211                 omap_mux_init_signal("mm1_txen_n", OMAP_PIN_OUTPUT);
 212                 /* FALLTHROUGH */
 213         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 214         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 215                 omap_mux_init_signal("mm1_txse0",
 216                         OMAP_PIN_INPUT_PULLDOWN);
 217                 omap_mux_init_signal("mm1_txdat",
 218                         OMAP_PIN_INPUT_PULLDOWN);
 219                 break;
 220         case OMAP_USBHS_PORT_MODE_UNUSED:
 221                 /* FALLTHROUGH */
 222         default:
 223                 break;
 224         }
 225         switch (port_mode[1]) {
 226         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 227         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 228         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 229         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 230                 omap_mux_init_signal("mm2_rxdp",
 231                         OMAP_PIN_INPUT_PULLDOWN);
 232                 omap_mux_init_signal("mm2_rxdm",
 233                         OMAP_PIN_INPUT_PULLDOWN);
 234                 /* FALLTHROUGH */
 235         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 236         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 237                 omap_mux_init_signal("mm2_rxrcv",
 238                         OMAP_PIN_INPUT_PULLDOWN);
 239                 /* FALLTHROUGH */
 240         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 241         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 242                 omap_mux_init_signal("mm2_txen_n", OMAP_PIN_OUTPUT);
 243                 /* FALLTHROUGH */
 244         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 245         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 246                 omap_mux_init_signal("mm2_txse0",
 247                         OMAP_PIN_INPUT_PULLDOWN);
 248                 omap_mux_init_signal("mm2_txdat",
 249                         OMAP_PIN_INPUT_PULLDOWN);
 250                 break;
 251         case OMAP_USBHS_PORT_MODE_UNUSED:
 252                 /* FALLTHROUGH */
 253         default:
 254                 break;
 255         }
 256         switch (port_mode[2]) {
 257         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 258         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 259         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 260         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 261                 omap_mux_init_signal("mm3_rxdp",
 262                         OMAP_PIN_INPUT_PULLDOWN);
 263                 omap_mux_init_signal("mm3_rxdm",
 264                         OMAP_PIN_INPUT_PULLDOWN);
 265                 /* FALLTHROUGH */
 266         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 267         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 268                 omap_mux_init_signal("mm3_rxrcv",
 269                         OMAP_PIN_INPUT_PULLDOWN);
 270                 /* FALLTHROUGH */
 271         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 272         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 273                 omap_mux_init_signal("mm3_txen_n", OMAP_PIN_OUTPUT);
 274                 /* FALLTHROUGH */
 275         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 276         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 277                 omap_mux_init_signal("mm3_txse0",
 278                         OMAP_PIN_INPUT_PULLDOWN);
 279                 omap_mux_init_signal("mm3_txdat",
 280                         OMAP_PIN_INPUT_PULLDOWN);
 281                 break;
 282         case OMAP_USBHS_PORT_MODE_UNUSED:
 283                 /* FALLTHROUGH */
 284         default:
 285                 break;
 286         }
 287 }
 288
 289 void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
 290 {
 291         struct omap_hwmod       *uhh_hwm, *tll_hwm;
 292         struct platform_device  *pdev;
 293         int                     bus_id = -1;
 294
 295         if (cpu_is_omap34xx()) {
 296                 setup_ehci_io_mux(pdata->port_mode);
 297                 setup_ohci_io_mux(pdata->port_mode);
 298
 299                 if (omap_rev() <= OMAP3430_REV_ES2_1)
 300                         pdata->single_ulpi_bypass = true;
 301
 302         }
 303
 304         uhh_hwm = omap_hwmod_lookup(USBHS_UHH_HWMODNAME);
 305         if (!uhh_hwm) {
 306                 pr_err("Could not look up %s\n", USBHS_UHH_HWMODNAME);
 307                 return;
 308         }
 309
 310         tll_hwm = omap_hwmod_lookup(USBHS_TLL_HWMODNAME);
 311         if (!tll_hwm) {
 312                 pr_err("Could not look up %s\n", USBHS_TLL_HWMODNAME);
 313                 return;
 314         }
 315
 316         pdev = omap_device_build(OMAP_USBTLL_DEVICE, bus_id, tll_hwm,
 317                                 pdata, sizeof(*pdata));
 318         if (IS_ERR(pdev)) {
 319                 pr_err("Could not build hwmod device %s\n",
 320                        USBHS_TLL_HWMODNAME);
 321                 return;
 322         }
 323
 324         pdev = omap_device_build(OMAP_USBHS_DEVICE, bus_id, uhh_hwm,
 325                                 pdata, sizeof(*pdata));
 326         if (IS_ERR(pdev)) {
 327                 pr_err("Could not build hwmod devices %s\n",
 328                        USBHS_UHH_HWMODNAME);
 329                 return;
 330         }
 331 }
 332
 333 #else
 334
 335 void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
 336 {
 337 }
 338
 339 #endif
 340
 341 /* Template for PHY regulators */
 342 static struct fixed_voltage_config hsusb_reg_config = {
 343         /* .supply_name filled later */
 344         .microvolts = 3300000,
 345         .gpio = -1,             /* updated later */
 346         .startup_delay = 70000, /* 70msec */
 347         .enable_high = 1,       /* updated later */
 348         .enabled_at_boot = 0,   /* keep in RESET */
 349         /* .init_data filled later */
 350 };
 351
 352 static const char *nop_name = "usb_phy_gen_xceiv"; /* NOP PHY driver */
 353 static const char *reg_name = "reg-fixed-voltage"; /* Regulator driver */
 354
 355 /**
 356  * usbhs_add_regulator - Add a gpio based fixed voltage regulator device
 357  * @name: name for the regulator
 358  * @dev_id: device id of the device this regulator supplies power to
 359  * @dev_supply: supply name that the device expects
 360  * @gpio: GPIO number
 361  * @polarity: 1 - Active high, 0 - Active low
 362  */
 363 static int usbhs_add_regulator(char *name, char *dev_id, char *dev_supply,
 364                                                 int gpio, int polarity)
 365 {
 366         struct regulator_consumer_supply *supplies;
 367         struct regulator_init_data *reg_data;
 368         struct fixed_voltage_config *config;
 369         struct platform_device *pdev;
 370         struct platform_device_info pdevinfo;
 371         int ret = -ENOMEM;
 372
 373         supplies = kzalloc(sizeof(*supplies), GFP_KERNEL);
 374         if (!supplies)
 375                 return -ENOMEM;
 376
 377         supplies->supply = dev_supply;
 378         supplies->dev_name = dev_id;
 379
 380         reg_data = kzalloc(sizeof(*reg_data), GFP_KERNEL);
 381         if (!reg_data)
 382                 goto err_data;
 383
 384         reg_data->constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS;
 385         reg_data->consumer_supplies = supplies;
 386         reg_data->num_consumer_supplies = 1;
 387
 388         config = kmemdup(&hsusb_reg_config, sizeof(hsusb_reg_config),
 389                         GFP_KERNEL);
 390         if (!config)
 391                 goto err_config;
 392
 393         config->supply_name = kstrdup(name, GFP_KERNEL);
 394         if (!config->supply_name)
 395                 goto err_supplyname;
 396
 397         config->gpio = gpio;
 398         config->enable_high = polarity;
 399         config->init_data = reg_data;
 400
 401         /* create a regulator device */
 402         memset(&pdevinfo, 0, sizeof(pdevinfo));
 403         pdevinfo.name = reg_name;
 404         pdevinfo.id = PLATFORM_DEVID_AUTO;
 405         pdevinfo.data = config;
 406         pdevinfo.size_data = sizeof(*config);
 407
 408         pdev = platform_device_register_full(&pdevinfo);
 409         if (IS_ERR(pdev)) {
 410                 ret = PTR_ERR(pdev);
 411                 pr_err("%s: Failed registering regulator %s for %s : %d\n",
 412                                 __func__, name, dev_id, ret);
 413                 goto err_register;
 414         }
 415
 416         return 0;
 417
 418 err_register:
 419         kfree(config->supply_name);
 420 err_supplyname:
 421         kfree(config);
 422 err_config:
 423         kfree(reg_data);
 424 err_data:
 425         kfree(supplies);
 426         return ret;
 427 }
 428
 429 #define MAX_STR 20
 430
 431 int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
 432 {
 433         char rail_name[MAX_STR];
 434         int i;
 435         struct platform_device *pdev;
 436         char *phy_id;
 437         struct platform_device_info pdevinfo;
 438         struct usb_phy_gen_xceiv_platform_data nop_pdata;
 439
 440         for (i = 0; i < num_phys; i++) {
 441
 442                 if (!phy->port) {
 443                         pr_err("%s: Invalid port 0. Must start from 1\n",
 444                                                 __func__);
 445                         continue;
 446                 }
 447
 448                 /* do we need a NOP PHY device ? */
 449                 if (!gpio_is_valid(phy->reset_gpio) &&
 450                         !gpio_is_valid(phy->vcc_gpio))
 451                         continue;
 452
 453                 phy_id = kmalloc(MAX_STR, GFP_KERNEL);
 454                 if (!phy_id) {
 455                         pr_err("%s: kmalloc() failed\n", __func__);
 456                         return -ENOMEM;
 457                 }
 458
 459                 /* set platform data */
 460                 memset(&nop_pdata, 0, sizeof(nop_pdata));
 461                 if (gpio_is_valid(phy->vcc_gpio))
 462                         nop_pdata.needs_vcc = true;
 463                 nop_pdata.gpio_reset = phy->reset_gpio;
 464                 nop_pdata.type = USB_PHY_TYPE_USB2;
 465
 466                 /* create a NOP PHY device */
 467                 memset(&pdevinfo, 0, sizeof(pdevinfo));
 468                 pdevinfo.name = nop_name;
 469                 pdevinfo.id = phy->port;
 470                 pdevinfo.data = &nop_pdata;
 471                 pdevinfo.size_data =
 472                         sizeof(struct usb_phy_gen_xceiv_platform_data);
 473                 scnprintf(phy_id, MAX_STR, "usb_phy_gen_xceiv.%d",
 474                                         phy->port);
 475                 pdev = platform_device_register_full(&pdevinfo);
 476                 if (IS_ERR(pdev)) {
 477                         pr_err("%s: Failed to register device %s : %ld\n",
 478                                 __func__,  phy_id, PTR_ERR(pdev));
 479                         kfree(phy_id);
 480                         continue;
 481                 }
 482
 483                 usb_bind_phy("ehci-omap.0", phy->port - 1, phy_id);
 484
 485                 /* Do we need VCC regulator ? */
 486                 if (gpio_is_valid(phy->vcc_gpio)) {
 487                         scnprintf(rail_name, MAX_STR, "hsusb%d_vcc", phy->port);
 488                         usbhs_add_regulator(rail_name, phy_id, "vcc",
 489                                         phy->vcc_gpio, phy->vcc_polarity);
 490                 }
 491
 492                 phy++;
 493         }
 494
 495         return 0;
 496 }