arch/arm/mach-ixp23xx/core.c

   1 /*
   2  * arch/arm/mach-ixp23xx/core.c
   3  *
   4  * Core routines for IXP23xx chips
   5  *
   6  * Author: Deepak Saxena <dsaxena@plexity.net>
   7  *
   8  * Copyright 2005 (c) MontaVista Software, Inc.
   9  *
  10  * Based on 2.4 code Copyright 2004 (c) Intel Corporation
  11  *
  12  * This file is licensed under the terms of the GNU General Public
  13  * License version 2. This program is licensed "as is" without any
  14  * warranty of any kind, whether express or implied.
  15  */
  16
  17 #include <linux/kernel.h>
  18 #include <linux/init.h>
  19 #include <linux/spinlock.h>
  20 #include <linux/sched.h>
  21 #include <linux/interrupt.h>
  22 #include <linux/serial.h>
  23 #include <linux/tty.h>
  24 #include <linux/bitops.h>
  25 #include <linux/serial.h>
  26 #include <linux/serial_8250.h>
  27 #include <linux/serial_core.h>
  28 #include <linux/device.h>
  29 #include <linux/mm.h>
  30 #include <linux/time.h>
  31 #include <linux/timex.h>
  32
  33 #include <asm/types.h>
  34 #include <asm/setup.h>
  35 #include <asm/memory.h>
  36 #include <asm/hardware.h>
  37 #include <asm/mach-types.h>
  38 #include <asm/irq.h>
  39 #include <asm/system.h>
  40 #include <asm/tlbflush.h>
  41 #include <asm/pgtable.h>
  42
  43 #include <asm/mach/map.h>
  44 #include <asm/mach/time.h>
  45 #include <asm/mach/irq.h>
  46 #include <asm/mach/arch.h>
  47
  48
  49 /*************************************************************************
  50  * Chip specific mappings shared by all IXP23xx systems
  51  *************************************************************************/
  52 static struct map_desc ixp23xx_io_desc[] __initdata = {
  53         { /* XSI-CPP CSRs */
  54                 .virtual        = IXP23XX_XSI2CPP_CSR_VIRT,
  55                 .pfn            = __phys_to_pfn(IXP23XX_XSI2CPP_CSR_PHYS),
  56                 .length         = IXP23XX_XSI2CPP_CSR_SIZE,
  57                 .type           = MT_DEVICE,
  58         }, { /* Expansion Bus Config */
  59                 .virtual        = IXP23XX_EXP_CFG_VIRT,
  60                 .pfn            = __phys_to_pfn(IXP23XX_EXP_CFG_PHYS),
  61                 .length         = IXP23XX_EXP_CFG_SIZE,
  62                 .type           = MT_DEVICE,
  63         }, { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACS,.... */
  64                 .virtual        = IXP23XX_PERIPHERAL_VIRT,
  65                 .pfn            = __phys_to_pfn(IXP23XX_PERIPHERAL_PHYS),
  66                 .length         = IXP23XX_PERIPHERAL_SIZE,
  67                 .type           = MT_DEVICE,
  68         }, { /* CAP CSRs */
  69                 .virtual        = IXP23XX_CAP_CSR_VIRT,
  70                 .pfn            = __phys_to_pfn(IXP23XX_CAP_CSR_PHYS),
  71                 .length         = IXP23XX_CAP_CSR_SIZE,
  72                 .type           = MT_DEVICE,
  73         }, { /* MSF CSRs */
  74                 .virtual        = IXP23XX_MSF_CSR_VIRT,
  75                 .pfn            = __phys_to_pfn(IXP23XX_MSF_CSR_PHYS),
  76                 .length         = IXP23XX_MSF_CSR_SIZE,
  77                 .type           = MT_DEVICE,
  78         }, { /* PCI I/O Space */
  79                 .virtual        = IXP23XX_PCI_IO_VIRT,
  80                 .pfn            = __phys_to_pfn(IXP23XX_PCI_IO_PHYS),
  81                 .length         = IXP23XX_PCI_IO_SIZE,
  82                 .type           = MT_DEVICE,
  83         }, { /* PCI Config Space */
  84                 .virtual        = IXP23XX_PCI_CFG_VIRT,
  85                 .pfn            = __phys_to_pfn(IXP23XX_PCI_CFG_PHYS),
  86                 .length         = IXP23XX_PCI_CFG_SIZE,
  87                 .type           = MT_DEVICE,
  88         }, { /* PCI local CFG CSRs */
  89                 .virtual        = IXP23XX_PCI_CREG_VIRT,
  90                 .pfn            = __phys_to_pfn(IXP23XX_PCI_CREG_PHYS),
  91                 .length         = IXP23XX_PCI_CREG_SIZE,
  92                 .type           = MT_DEVICE,
  93         }, { /* PCI MEM Space */
  94                 .virtual        = IXP23XX_PCI_MEM_VIRT,
  95                 .pfn            = __phys_to_pfn(IXP23XX_PCI_MEM_PHYS),
  96                 .length         = IXP23XX_PCI_MEM_SIZE,
  97                 .type           = MT_DEVICE,
  98         }
  99 };
 100
 101 void __init ixp23xx_map_io(void)
 102 {
 103         iotable_init(ixp23xx_io_desc, ARRAY_SIZE(ixp23xx_io_desc));
 104 }
 105
 106
 107 /***************************************************************************
 108  * IXP23xx Interrupt Handling
 109  ***************************************************************************/
 110 enum ixp23xx_irq_type {
 111         IXP23XX_IRQ_LEVEL, IXP23XX_IRQ_EDGE
 112 };
 113
 114 static void ixp23xx_config_irq(unsigned int, enum ixp23xx_irq_type);
 115
 116 static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type)
 117 {
 118         int line = irq - IRQ_IXP23XX_GPIO6 + 6;
 119         u32 int_style;
 120         enum ixp23xx_irq_type irq_type;
 121         volatile u32 *int_reg;
 122
 123         /*
 124          * Only GPIOs 6-15 are wired to interrupts on IXP23xx
 125          */
 126         if (line < 6 || line > 15)
 127                 return -EINVAL;
 128
 129         switch (type) {
 130         case IRQT_BOTHEDGE:
 131                 int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL;
 132                 irq_type = IXP23XX_IRQ_EDGE;
 133                 break;
 134         case IRQT_RISING:
 135                 int_style = IXP23XX_GPIO_STYLE_RISING_EDGE;
 136                 irq_type = IXP23XX_IRQ_EDGE;
 137                 break;
 138         case IRQT_FALLING:
 139                 int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE;
 140                 irq_type = IXP23XX_IRQ_EDGE;
 141                 break;
 142         case IRQT_HIGH:
 143                 int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH;
 144                 irq_type = IXP23XX_IRQ_LEVEL;
 145                 break;
 146         case IRQT_LOW:
 147                 int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW;
 148                 irq_type = IXP23XX_IRQ_LEVEL;
 149                 break;
 150         default:
 151                 return -EINVAL;
 152         }
 153
 154         ixp23xx_config_irq(irq, irq_type);
 155
 156         if (line >= 8) {        /* pins 8-15 */
 157                 line -= 8;
 158                 int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT2R;
 159         } else {                /* pins 0-7 */
 160                 int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT1R;
 161         }
 162
 163         /*
 164          * Clear pending interrupts
 165          */
 166         *IXP23XX_GPIO_GPISR = (1 << line);
 167
 168         /* Clear the style for the appropriate pin */
 169         *int_reg &= ~(IXP23XX_GPIO_STYLE_MASK <<
 170                         (line * IXP23XX_GPIO_STYLE_SIZE));
 171
 172         /* Set the new style */
 173         *int_reg |= (int_style << (line * IXP23XX_GPIO_STYLE_SIZE));
 174
 175         return 0;
 176 }
 177
 178 static void ixp23xx_irq_mask(unsigned int irq)
 179 {
 180         volatile unsigned long *intr_reg;
 181
 182         if (irq >= 56)
 183                 irq += 8;
 184
 185         intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
 186         *intr_reg &= ~(1 << (irq % 32));
 187 }
 188
 189 static void ixp23xx_irq_ack(unsigned int irq)
 190 {
 191         int line = irq - IRQ_IXP23XX_GPIO6 + 6;
 192
 193         if ((line < 6) || (line > 15))
 194                 return;
 195
 196         *IXP23XX_GPIO_GPISR = (1 << line);
 197 }
 198
 199 /*
 200  * Level triggered interrupts on GPIO lines can only be cleared when the
 201  * interrupt condition disappears.
 202  */
 203 static void ixp23xx_irq_level_unmask(unsigned int irq)
 204 {
 205         volatile unsigned long *intr_reg;
 206
 207         ixp23xx_irq_ack(irq);
 208
 209         if (irq >= 56)
 210                 irq += 8;
 211
 212         intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
 213         *intr_reg |= (1 << (irq % 32));
 214 }
 215
 216 static void ixp23xx_irq_edge_unmask(unsigned int irq)
 217 {
 218         volatile unsigned long *intr_reg;
 219
 220         if (irq >= 56)
 221                 irq += 8;
 222
 223         intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
 224         *intr_reg |= (1 << (irq % 32));
 225 }
 226
 227 static struct irq_chip ixp23xx_irq_level_chip = {
 228         .ack            = ixp23xx_irq_mask,
 229         .mask           = ixp23xx_irq_mask,
 230         .unmask         = ixp23xx_irq_level_unmask,
 231         .set_type       = ixp23xx_irq_set_type
 232 };
 233
 234 static struct irq_chip ixp23xx_irq_edge_chip = {
 235         .ack            = ixp23xx_irq_ack,
 236         .mask           = ixp23xx_irq_mask,
 237         .unmask         = ixp23xx_irq_edge_unmask,
 238         .set_type       = ixp23xx_irq_set_type
 239 };
 240
 241 static void ixp23xx_pci_irq_mask(unsigned int irq)
 242 {
 243         *IXP23XX_PCI_XSCALE_INT_ENABLE &= ~(1 << (IRQ_IXP23XX_INTA + 27 - irq));
 244 }
 245
 246 static void ixp23xx_pci_irq_unmask(unsigned int irq)
 247 {
 248         *IXP23XX_PCI_XSCALE_INT_ENABLE |= (1 << (IRQ_IXP23XX_INTA + 27 - irq));
 249 }
 250
 251 /*
 252  * TODO: Should this just be done at ASM level?
 253  */
 254 static void pci_handler(unsigned int irq, struct irq_desc *desc)
 255 {
 256         u32 pci_interrupt;
 257         unsigned int irqno;
 258         struct irq_desc *int_desc;
 259
 260         pci_interrupt = *IXP23XX_PCI_XSCALE_INT_STATUS;
 261
 262         desc->chip->ack(irq);
 263
 264         /* See which PCI_INTA, or PCI_INTB interrupted */
 265         if (pci_interrupt & (1 << 26)) {
 266                 irqno = IRQ_IXP23XX_INTB;
 267         } else if (pci_interrupt & (1 << 27)) {
 268                 irqno = IRQ_IXP23XX_INTA;
 269         } else {
 270                 BUG();
 271         }
 272
 273         int_desc = irq_desc + irqno;
 274         desc_handle_irq(irqno, int_desc);
 275
 276         desc->chip->unmask(irq);
 277 }
 278
 279 static struct irq_chip ixp23xx_pci_irq_chip = {
 280         .ack    = ixp23xx_pci_irq_mask,
 281         .mask   = ixp23xx_pci_irq_mask,
 282         .unmask = ixp23xx_pci_irq_unmask
 283 };
 284
 285 static void ixp23xx_config_irq(unsigned int irq, enum ixp23xx_irq_type type)
 286 {
 287         switch (type) {
 288         case IXP23XX_IRQ_LEVEL:
 289                 set_irq_chip(irq, &ixp23xx_irq_level_chip);
 290                 set_irq_handler(irq, handle_level_irq);
 291                 break;
 292         case IXP23XX_IRQ_EDGE:
 293                 set_irq_chip(irq, &ixp23xx_irq_edge_chip);
 294                 set_irq_handler(irq, handle_edge_irq);
 295                 break;
 296         }
 297         set_irq_flags(irq, IRQF_VALID);
 298 }
 299
 300 void __init ixp23xx_init_irq(void)
 301 {
 302         int irq;
 303
 304         /* Route everything to IRQ */
 305         *IXP23XX_INTR_SEL1 = 0x0;
 306         *IXP23XX_INTR_SEL2 = 0x0;
 307         *IXP23XX_INTR_SEL3 = 0x0;
 308         *IXP23XX_INTR_SEL4 = 0x0;
 309
 310         /* Mask all sources */
 311         *IXP23XX_INTR_EN1 = 0x0;
 312         *IXP23XX_INTR_EN2 = 0x0;
 313         *IXP23XX_INTR_EN3 = 0x0;
 314         *IXP23XX_INTR_EN4 = 0x0;
 315
 316         /*
 317          * Configure all IRQs for level-sensitive operation
 318          */
 319         for (irq = 0; irq <= NUM_IXP23XX_RAW_IRQS; irq++) {
 320                 ixp23xx_config_irq(irq, IXP23XX_IRQ_LEVEL);
 321         }
 322
 323         for (irq = IRQ_IXP23XX_INTA; irq <= IRQ_IXP23XX_INTB; irq++) {
 324                 set_irq_chip(irq, &ixp23xx_pci_irq_chip);
 325                 set_irq_handler(irq, handle_level_irq);
 326                 set_irq_flags(irq, IRQF_VALID);
 327         }
 328
 329         set_irq_chained_handler(IRQ_IXP23XX_PCI_INT_RPH, pci_handler);
 330 }
 331
 332
 333 /*************************************************************************
 334  * Timer-tick functions for IXP23xx
 335  *************************************************************************/
 336 #define CLOCK_TICKS_PER_USEC    (CLOCK_TICK_RATE / USEC_PER_SEC)
 337
 338 static unsigned long next_jiffy_time;
 339
 340 static unsigned long
 341 ixp23xx_gettimeoffset(void)
 342 {
 343         unsigned long elapsed;
 344
 345         elapsed = *IXP23XX_TIMER_CONT - (next_jiffy_time - LATCH);
 346
 347         return elapsed / CLOCK_TICKS_PER_USEC;
 348 }
 349
 350 static irqreturn_t
 351 ixp23xx_timer_interrupt(int irq, void *dev_id)
 352 {
 353         /* Clear Pending Interrupt by writing '1' to it */
 354         *IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND;
 355         while ((signed long)(*IXP23XX_TIMER_CONT - next_jiffy_time) >= LATCH) {
 356                 timer_tick();
 357                 next_jiffy_time += LATCH;
 358         }
 359
 360         return IRQ_HANDLED;
 361 }
 362
 363 static struct irqaction ixp23xx_timer_irq = {
 364         .name           = "IXP23xx Timer Tick",
 365         .handler        = ixp23xx_timer_interrupt,
 366         .flags          = IRQF_DISABLED | IRQF_TIMER,
 367 };
 368
 369 void __init ixp23xx_init_timer(void)
 370 {
 371         /* Clear Pending Interrupt by writing '1' to it */
 372         *IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND;
 373
 374         /* Setup the Timer counter value */
 375         *IXP23XX_TIMER1_RELOAD =
 376                 (LATCH & ~IXP23XX_TIMER_RELOAD_MASK) | IXP23XX_TIMER_ENABLE;
 377
 378         *IXP23XX_TIMER_CONT = 0;
 379         next_jiffy_time = LATCH;
 380
 381         /* Connect the interrupt handler and enable the interrupt */
 382         setup_irq(IRQ_IXP23XX_TIMER1, &ixp23xx_timer_irq);
 383 }
 384
 385 struct sys_timer ixp23xx_timer = {
 386         .init           = ixp23xx_init_timer,
 387         .offset         = ixp23xx_gettimeoffset,
 388 };
 389
 390
 391 /*************************************************************************
 392  * IXP23xx Platform Initializaion
 393  *************************************************************************/
 394 static struct resource ixp23xx_uart_resources[] = {
 395         {
 396                 .start          = IXP23XX_UART1_PHYS,
 397                 .end            = IXP23XX_UART1_PHYS + 0x0fff,
 398                 .flags          = IORESOURCE_MEM
 399         }, {
 400                 .start          = IXP23XX_UART2_PHYS,
 401                 .end            = IXP23XX_UART2_PHYS + 0x0fff,
 402                 .flags          = IORESOURCE_MEM
 403         }
 404 };
 405
 406 static struct plat_serial8250_port ixp23xx_uart_data[] = {
 407         {
 408                 .mapbase        = IXP23XX_UART1_PHYS,
 409                 .membase        = (char *)(IXP23XX_UART1_VIRT + 3),
 410                 .irq            = IRQ_IXP23XX_UART1,
 411                 .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 412                 .iotype         = UPIO_MEM,
 413                 .regshift       = 2,
 414                 .uartclk        = IXP23XX_UART_XTAL,
 415         }, {
 416                 .mapbase        = IXP23XX_UART2_PHYS,
 417                 .membase        = (char *)(IXP23XX_UART2_VIRT + 3),
 418                 .irq            = IRQ_IXP23XX_UART2,
 419                 .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 420                 .iotype         = UPIO_MEM,
 421                 .regshift       = 2,
 422                 .uartclk        = IXP23XX_UART_XTAL,
 423         },
 424         { },
 425 };
 426
 427 static struct platform_device ixp23xx_uart = {
 428         .name                   = "serial8250",
 429         .id                     = 0,
 430         .dev.platform_data      = ixp23xx_uart_data,
 431         .num_resources          = 2,
 432         .resource               = ixp23xx_uart_resources,
 433 };
 434
 435 static struct platform_device *ixp23xx_devices[] __initdata = {
 436         &ixp23xx_uart,
 437 };
 438
 439 void __init ixp23xx_sys_init(void)
 440 {
 441         *IXP23XX_EXP_UNIT_FUSE |= 0xf;
 442         platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices));
 443 }