arch/arm/boot/dts/stih416-pinctrl.dtsi

   1
   2 /*
   3  * Copyright (C) 2013 STMicroelectronics Limited.
   4  * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * publishhed by the Free Software Foundation.
   9  */
  10 #include "st-pincfg.h"
  11 #include <dt-bindings/interrupt-controller/arm-gic.h>
  12 / {
  13
  14         aliases {
  15                 gpio0   = &pio0;
  16                 gpio1   = &pio1;
  17                 gpio2   = &pio2;
  18                 gpio3   = &pio3;
  19                 gpio4   = &pio4;
  20                 gpio5   = &pio40;
  21                 gpio6   = &pio5;
  22                 gpio7   = &pio6;
  23                 gpio8   = &pio7;
  24                 gpio9   = &pio8;
  25                 gpio10  = &pio9;
  26                 gpio11  = &pio10;
  27                 gpio12  = &pio11;
  28                 gpio13  = &pio12;
  29                 gpio14  = &pio30;
  30                 gpio15  = &pio31;
  31                 gpio16  = &pio13;
  32                 gpio17  = &pio14;
  33                 gpio18  = &pio15;
  34                 gpio19  = &pio16;
  35                 gpio20  = &pio17;
  36                 gpio21  = &pio18;
  37                 gpio22  = &pio100;
  38                 gpio23  = &pio101;
  39                 gpio24  = &pio102;
  40                 gpio25  = &pio103;
  41                 gpio26  = &pio104;
  42                 gpio27  = &pio105;
  43                 gpio28  = &pio106;
  44                 gpio29  = &pio107;
  45         };
  46
  47         soc {
  48                 pin-controller-sbc {
  49                         #address-cells  = <1>;
  50                         #size-cells     = <1>;
  51                         compatible      = "st,stih416-sbc-pinctrl";
  52                         st,syscfg       = <&syscfg_sbc>;
  53                         reg             = <0xfe61f080 0x4>;
  54                         reg-names       = "irqmux";
  55                         interrupts      = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
  56                         interrupt-names = "irqmux";
  57                         ranges          = <0 0xfe610000 0x6000>;
  58
  59                         pio0: gpio@fe610000 {
  60                                 gpio-controller;
  61                                 #gpio-cells = <1>;
  62                                 interrupt-controller;
  63                                 #interrupt-cells = <2>;
  64                                 reg             = <0 0x100>;
  65                                 st,bank-name    = "PIO0";
  66                         };
  67                         pio1: gpio@fe611000 {
  68                                 gpio-controller;
  69                                 #gpio-cells     = <1>;
  70                                 interrupt-controller;
  71                                 #interrupt-cells = <2>;
  72                                 reg             = <0x1000 0x100>;
  73                                 st,bank-name    = "PIO1";
  74                         };
  75                         pio2: gpio@fe612000 {
  76                                 gpio-controller;
  77                                 #gpio-cells     = <1>;
  78                                 interrupt-controller;
  79                                 #interrupt-cells = <2>;
  80                                 reg             = <0x2000 0x100>;
  81                                 st,bank-name    = "PIO2";
  82                         };
  83                         pio3: gpio@fe613000 {
  84                                 gpio-controller;
  85                                 #gpio-cells     = <1>;
  86                                 interrupt-controller;
  87                                 #interrupt-cells = <2>;
  88                                 reg             = <0x3000 0x100>;
  89                                 st,bank-name    = "PIO3";
  90                         };
  91                         pio4: gpio@fe614000 {
  92                                 gpio-controller;
  93                                 #gpio-cells     = <1>;
  94                                 interrupt-controller;
  95                                 #interrupt-cells = <2>;
  96                                 reg             = <0x4000 0x100>;
  97                                 st,bank-name    = "PIO4";
  98                         };
  99                         pio40: gpio@fe615000 {
 100                                 gpio-controller;
 101                                 #gpio-cells     = <1>;
 102                                 interrupt-controller;
 103                                 #interrupt-cells = <2>;
 104                                 reg             = <0x5000 0x100>;
 105                                 st,bank-name    = "PIO40";
 106                                 st,retime-pin-mask = <0x7f>;
 107                         };
 108
 109                         rc{
 110                                 pinctrl_ir: ir0 {
 111                                         st,pins {
 112                                                 ir = <&pio4 0 ALT2 IN>;
 113                                         };
 114                                 };
 115                         };
 116                         sbc_serial1 {
 117                                 pinctrl_sbc_serial1: sbc_serial1 {
 118                                         st,pins {
 119                                                 tx      = <&pio2 6 ALT3 OUT>;
 120                                                 rx      = <&pio2 7 ALT3 IN>;
 121                                         };
 122                                 };
 123                         };
 124
 125                         keyscan {
 126                                 pinctrl_keyscan: keyscan {
 127                                         st,pins {
 128                                                 keyin0 = <&pio0 2 ALT2 IN>;
 129                                                 keyin1 = <&pio0 3 ALT2 IN>;
 130                                                 keyin2 = <&pio0 4 ALT2 IN>;
 131                                                 keyin3 = <&pio2 6 ALT2 IN>;
 132
 133                                                 keyout0 = <&pio1 6 ALT2 OUT>;
 134                                                 keyout1 = <&pio1 7 ALT2 OUT>;
 135                                                 keyout2 = <&pio0 6 ALT2 OUT>;
 136                                                 keyout3 = <&pio2 7 ALT2 OUT>;
 137                                         };
 138                                 };
 139                         };
 140
 141                         sbc_i2c0 {
 142                                 pinctrl_sbc_i2c0_default: sbc_i2c0-default {
 143                                         st,pins {
 144                                                 sda = <&pio4 6 ALT1 BIDIR>;
 145                                                 scl = <&pio4 5 ALT1 BIDIR>;
 146                                         };
 147                                 };
 148                         };
 149
 150                         usb {
 151                                 pinctrl_usb3: usb3 {
 152                                         st,pins {
 153                                                 oc-detect = <&pio40 0 ALT1 IN>;
 154                                                 pwr-enable = <&pio40 1 ALT1 OUT>;
 155                                         };
 156                                 };
 157                         };
 158
 159                         sbc_i2c1 {
 160                                 pinctrl_sbc_i2c1_default: sbc_i2c1-default {
 161                                         st,pins {
 162                                                 sda = <&pio3 2 ALT2 BIDIR>;
 163                                                 scl = <&pio3 1 ALT2 BIDIR>;
 164                                         };
 165                                 };
 166                         };
 167
 168                         gmac1 {
 169                                 pinctrl_mii1: mii1 {
 170                                         st,pins {
 171                                                 txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 172                                                 txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 173                                                 txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 174                                                 txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 175                                                 txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 176                                                 txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 177                                                 txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
 178                                                 col =   <&pio0 7 ALT1 IN BYPASS 1000>;
 179
 180                                                 mdio =  <&pio1 0 ALT1 OUT BYPASS 1500>;
 181                                                 mdc =   <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
 182                                                 crs =   <&pio1 2 ALT1 IN BYPASS 1000>;
 183                                                 mdint = <&pio1 3 ALT1 IN BYPASS 0>;
 184                                                 rxd0 =  <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 185                                                 rxd1 =  <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 186                                                 rxd2 =  <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 187                                                 rxd3 =  <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 188
 189                                                 rxdv =  <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 190                                                 rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 191                                                 rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
 192                                                 phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
 193                                         };
 194                                 };
 195                                 pinctrl_rgmii1: rgmii1-0 {
 196                                         st,pins {
 197                                                 txd0 =  <&pio0 0 ALT1 OUT DE_IO 500 CLK_A>;
 198                                                 txd1 =  <&pio0 1 ALT1 OUT DE_IO 500 CLK_A>;
 199                                                 txd2 =  <&pio0 2 ALT1 OUT DE_IO 500 CLK_A>;
 200                                                 txd3 =  <&pio0 3 ALT1 OUT DE_IO 500 CLK_A>;
 201                                                 txen =  <&pio0 5 ALT1 OUT DE_IO 0   CLK_A>;
 202                                                 txclk = <&pio0 6 ALT1 IN  NICLK 0   CLK_A>;
 203
 204                                                 mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
 205                                                 mdc  = <&pio1 1 ALT1 OUT NICLK  0 CLK_A>;
 206                                                 rxd0 = <&pio1 4 ALT1 IN DE_IO 500 CLK_A>;
 207                                                 rxd1 = <&pio1 5 ALT1 IN DE_IO 500 CLK_A>;
 208                                                 rxd2 = <&pio1 6 ALT1 IN DE_IO 500 CLK_A>;
 209                                                 rxd3 = <&pio1 7 ALT1 IN DE_IO 500 CLK_A>;
 210
 211                                                 rxdv   = <&pio2 0 ALT1 IN  DE_IO 500 CLK_A>;
 212                                                 rxclk  = <&pio2 2 ALT1 IN  NICLK 0   CLK_A>;
 213                                                 phyclk = <&pio2 3 ALT4 OUT NICLK 0   CLK_B>;
 214
 215                                                 clk125= <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
 216                                         };
 217                                 };
 218                         };
 219
 220                         pwm1 {
 221                                 pinctrl_pwm1_chan0_default: pwm1-0-default {
 222                                         st,pins {
 223                                                 pwm-out    = <&pio3 0 ALT1 OUT>;
 224                                         };
 225                                 };
 226                                 pinctrl_pwm1_chan1_default: pwm1-1-default {
 227                                         st,pins {
 228                                                 pwm-out    = <&pio4 4 ALT1 OUT>;
 229                                         };
 230                                 };
 231                                 pinctrl_pwm1_chan2_default: pwm1-2-default {
 232                                         st,pins {
 233                                                 pwm-out    = <&pio4 6 ALT3 OUT>;
 234                                         };
 235                                 };
 236                                 pinctrl_pwm1_chan3_default: pwm1-3-default {
 237                                         st,pins {
 238                                                 pwm-out    = <&pio4 7 ALT3 OUT>;
 239                                         };
 240                                 };
 241                         };
 242                 };
 243
 244                 pin-controller-front {
 245                         #address-cells  = <1>;
 246                         #size-cells     = <1>;
 247                         compatible      = "st,stih416-front-pinctrl";
 248                         st,syscfg       = <&syscfg_front>;
 249                         reg             = <0xfee0f080 0x4>;
 250                         reg-names       = "irqmux";
 251                         interrupts      = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
 252                         interrupt-names = "irqmux";
 253                         ranges          = <0 0xfee00000 0x10000>;
 254
 255                         pio5: gpio@fee00000 {
 256                                 gpio-controller;
 257                                 #gpio-cells     = <1>;
 258                                 interrupt-controller;
 259                                 #interrupt-cells = <2>;
 260                                 reg             = <0 0x100>;
 261                                 st,bank-name    = "PIO5";
 262                         };
 263                         pio6: gpio@fee01000 {
 264                                 gpio-controller;
 265                                 #gpio-cells     = <1>;
 266                                 interrupt-controller;
 267                                 #interrupt-cells = <2>;
 268                                 reg             = <0x1000 0x100>;
 269                                 st,bank-name    = "PIO6";
 270                         };
 271                         pio7: gpio@fee02000 {
 272                                 gpio-controller;
 273                                 #gpio-cells     = <1>;
 274                                 interrupt-controller;
 275                                 #interrupt-cells = <2>;
 276                                 reg             = <0x2000 0x100>;
 277                                 st,bank-name    = "PIO7";
 278                         };
 279                         pio8: gpio@fee03000 {
 280                                 gpio-controller;
 281                                 #gpio-cells     = <1>;
 282                                 interrupt-controller;
 283                                 #interrupt-cells = <2>;
 284                                 reg             = <0x3000 0x100>;
 285                                 st,bank-name    = "PIO8";
 286                         };
 287                         pio9: gpio@fee04000 {
 288                                 gpio-controller;
 289                                 #gpio-cells     = <1>;
 290                                 interrupt-controller;
 291                                 #interrupt-cells = <2>;
 292                                 reg             = <0x4000 0x100>;
 293                                 st,bank-name    = "PIO9";
 294                         };
 295                         pio10: gpio@fee05000 {
 296                                 gpio-controller;
 297                                 #gpio-cells     = <1>;
 298                                 interrupt-controller;
 299                                 #interrupt-cells = <2>;
 300                                 reg             = <0x5000 0x100>;
 301                                 st,bank-name    = "PIO10";
 302                         };
 303                         pio11: gpio@fee06000 {
 304                                 gpio-controller;
 305                                 #gpio-cells     = <1>;
 306                                 interrupt-controller;
 307                                 #interrupt-cells = <2>;
 308                                 reg             = <0x6000 0x100>;
 309                                 st,bank-name    = "PIO11";
 310                         };
 311                         pio12: gpio@fee07000 {
 312                                 gpio-controller;
 313                                 #gpio-cells     = <1>;
 314                                 interrupt-controller;
 315                                 #interrupt-cells = <2>;
 316                                 reg             = <0x7000 0x100>;
 317                                 st,bank-name    = "PIO12";
 318                         };
 319                         pio30: gpio@fee08000 {
 320                                 gpio-controller;
 321                                 #gpio-cells     = <1>;
 322                                 interrupt-controller;
 323                                 #interrupt-cells = <2>;
 324                                 reg             = <0x8000 0x100>;
 325                                 st,bank-name    = "PIO30";
 326                         };
 327                         pio31: gpio@fee09000 {
 328                                 gpio-controller;
 329                                 #gpio-cells     = <1>;
 330                                 interrupt-controller;
 331                                 #interrupt-cells = <2>;
 332                                 reg             = <0x9000 0x100>;
 333                                 st,bank-name    = "PIO31";
 334                         };
 335
 336                         pwm0 {
 337                                 pinctrl_pwm0_chan0_default: pwm0-0-default {
 338                                         st,pins {
 339                                                 pwm-out    = <&pio9 7 ALT2 OUT>;
 340                                         };
 341                                 };
 342                         };
 343
 344                         serial2-oe {
 345                                 pinctrl_serial2_oe: serial2-1 {
 346                                         st,pins {
 347                                                 output-enable   = <&pio11 3 ALT2 OUT>;
 348                                         };
 349                                 };
 350                         };
 351
 352                         i2c0 {
 353                                 pinctrl_i2c0_default: i2c0-default {
 354                                         st,pins {
 355                                                 sda = <&pio9 3 ALT1 BIDIR>;
 356                                                 scl = <&pio9 2 ALT1 BIDIR>;
 357                                         };
 358                                 };
 359                         };
 360
 361                         usb {
 362                                 pinctrl_usb0: usb0 {
 363                                         st,pins {
 364                                                 oc-detect = <&pio9 4 ALT1 IN>;
 365                                                 pwr-enable = <&pio9 5 ALT1 OUT>;
 366                                         };
 367                                 };
 368                         };
 369
 370
 371                         i2c1 {
 372                                 pinctrl_i2c1_default: i2c1-default {
 373                                         st,pins {
 374                                                 sda = <&pio12 1 ALT1 BIDIR>;
 375                                                 scl = <&pio12 0 ALT1 BIDIR>;
 376                                         };
 377                                 };
 378                         };
 379
 380                         fsm {
 381                                 pinctrl_fsm: fsm {
 382                                         st,pins {
 383                                                 spi-fsm-clk  = <&pio12 2 ALT1 OUT>;
 384                                                 spi-fsm-cs   = <&pio12 3 ALT1 OUT>;
 385                                                 spi-fsm-mosi = <&pio12 4 ALT1 OUT>;
 386                                                 spi-fsm-miso = <&pio12 5 ALT1 IN>;
 387                                                 spi-fsm-hol  = <&pio12 6 ALT1 OUT>;
 388                                                 spi-fsm-wp   = <&pio12 7 ALT1 OUT>;
 389                                         };
 390                                 };
 391                         };
 392                 };
 393
 394                 pin-controller-rear {
 395                         #address-cells  = <1>;
 396                         #size-cells     = <1>;
 397                         compatible      = "st,stih416-rear-pinctrl";
 398                         st,syscfg       = <&syscfg_rear>;
 399                         reg             = <0xfe82f080 0x4>;
 400                         reg-names       = "irqmux";
 401                         interrupts      = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
 402                         interrupt-names = "irqmux";
 403                         ranges          = <0 0xfe820000 0x6000>;
 404
 405                         pio13: gpio@fe820000 {
 406                                 gpio-controller;
 407                                 #gpio-cells     = <1>;
 408                                 interrupt-controller;
 409                                 #interrupt-cells = <2>;
 410                                 reg             = <0 0x100>;
 411                                 st,bank-name    = "PIO13";
 412                         };
 413                         pio14: gpio@fe821000 {
 414                                 gpio-controller;
 415                                 #gpio-cells     = <1>;
 416                                 interrupt-controller;
 417                                 #interrupt-cells = <2>;
 418                                 reg             = <0x1000 0x100>;
 419                                 st,bank-name    = "PIO14";
 420                         };
 421                         pio15: gpio@fe822000 {
 422                                 gpio-controller;
 423                                 #gpio-cells     = <1>;
 424                                 interrupt-controller;
 425                                 #interrupt-cells = <2>;
 426                                 reg             = <0x2000 0x100>;
 427                                 st,bank-name    = "PIO15";
 428                         };
 429                         pio16: gpio@fe823000 {
 430                                 gpio-controller;
 431                                 #gpio-cells     = <1>;
 432                                 interrupt-controller;
 433                                 #interrupt-cells = <2>;
 434                                 reg             = <0x3000 0x100>;
 435                                 st,bank-name    = "PIO16";
 436                         };
 437                         pio17: gpio@fe824000 {
 438                                 gpio-controller;
 439                                 #gpio-cells     = <1>;
 440                                 interrupt-controller;
 441                                 #interrupt-cells = <2>;
 442                                 reg             = <0x4000 0x100>;
 443                                 st,bank-name    = "PIO17";
 444                         };
 445                         pio18: gpio@fe825000 {
 446                                 gpio-controller;
 447                                 #gpio-cells     = <1>;
 448                                 interrupt-controller;
 449                                 #interrupt-cells = <2>;
 450                                 reg             = <0x5000 0x100>;
 451                                 st,bank-name    = "PIO18";
 452                                 st,retime-pin-mask = <0xf>;
 453                         };
 454
 455                         serial2 {
 456                                 pinctrl_serial2: serial2-0 {
 457                                         st,pins {
 458                                                 tx      = <&pio17 4 ALT2 OUT>;
 459                                                 rx      = <&pio17 5 ALT2 IN>;
 460                                         };
 461                                 };
 462                         };
 463
 464                         gmac0 {
 465                                 pinctrl_mii0: mii0 {
 466                                         st,pins {
 467                                                 mdint = <&pio13 6 ALT2 IN  BYPASS      0>;
 468                                                 txen =  <&pio13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
 469                                                 txd0 =  <&pio14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
 470                                                 txd1 =  <&pio14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
 471                                                 txd2 =  <&pio14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
 472                                                 txd3 =  <&pio14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
 473
 474                                                 txclk = <&pio15 0 ALT2 IN  NICLK       0 CLK_A>;
 475                                                 txer =  <&pio15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
 476                                                 crs = <&pio15 2 ALT2 IN  BYPASS 1000>;
 477                                                 col = <&pio15 3 ALT2 IN  BYPASS 1000>;
 478                                                 mdio= <&pio15 4 ALT2 OUT BYPASS 1500>;
 479                                                 mdc = <&pio15 5 ALT2 OUT NICLK  0    CLK_B>;
 480
 481                                                 rxd0 =  <&pio16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
 482                                                 rxd1 =  <&pio16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
 483                                                 rxd2 =  <&pio16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
 484                                                 rxd3 =  <&pio16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
 485                                                 rxdv =  <&pio15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
 486                                                 rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
 487                                                 rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>;
 488                                                 phyclk = <&pio13 5 ALT2 OUT NICLK 0 CLK_B>;
 489                                         };
 490                                 };
 491
 492                                 pinctrl_gmii0: gmii0 {
 493                                         st,pins {
 494                                                 };
 495                                 };
 496                                 pinctrl_rgmii0: rgmii0 {
 497                                         st,pins {
 498                                                  phyclk = <&pio13  5 ALT4 OUT NICLK 0 CLK_B>;
 499                                                  txen = <&pio13 7 ALT2 OUT DE_IO 0 CLK_A>;
 500                                                  txd0  = <&pio14 0 ALT2 OUT DE_IO 500 CLK_A>;
 501                                                  txd1  = <&pio14 1 ALT2 OUT DE_IO 500 CLK_A>;
 502                                                  txd2  = <&pio14 2 ALT2 OUT DE_IO 500 CLK_B>;
 503                                                  txd3  = <&pio14 3 ALT2 OUT DE_IO 500 CLK_B>;
 504                                                  txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>;
 505
 506                                                  mdio = <&pio15 4 ALT2 OUT BYPASS 0>;
 507                                                  mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>;
 508
 509                                                  rxdv = <&pio15 6 ALT2 IN DE_IO 500 CLK_A>;
 510                                                  rxd0 =<&pio16 0 ALT2 IN DE_IO  500 CLK_A>;
 511                                                  rxd1 =<&pio16 1 ALT2 IN DE_IO  500 CLK_A>;
 512                                                  rxd2 =<&pio16 2 ALT2 IN DE_IO  500 CLK_A>;
 513                                                  rxd3  =<&pio16 3 ALT2 IN DE_IO 500 CLK_A>;
 514                                                  rxclk =<&pio17 0 ALT2 IN NICLK 0 CLK_A>;
 515
 516                                                  clk125=<&pio17 6 ALT1 IN NICLK 0 CLK_A>;
 517                                         };
 518                                 };
 519                         };
 520
 521                         mmc0 {
 522                                 pinctrl_mmc0: mmc0 {
 523                                         st,pins {
 524                                                 mmcclk  = <&pio13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>;
 525                                                 data0   = <&pio14 4 ALT4 BIDIR_PU BYPASS 0>;
 526                                                 data1   = <&pio14 5 ALT4 BIDIR_PU BYPASS 0>;
 527                                                 data2   = <&pio14 6 ALT4 BIDIR_PU BYPASS 0>;
 528                                                 data3   = <&pio14 7 ALT4 BIDIR_PU BYPASS 0>;
 529                                                 cmd     = <&pio15 1 ALT4 BIDIR_PU BYPASS 0>;
 530                                                 wp      = <&pio15 3 ALT4 IN>;
 531                                                 data4   = <&pio16 4 ALT4 BIDIR_PU BYPASS 0>;
 532                                                 data5   = <&pio16 5 ALT4 BIDIR_PU BYPASS 0>;
 533                                                 data6   = <&pio16 6 ALT4 BIDIR_PU BYPASS 0>;
 534                                                 data7   = <&pio16 7 ALT4 BIDIR_PU BYPASS 0>;
 535                                                 pwr     = <&pio17 1 ALT4 OUT>;
 536                                                 cd      = <&pio17 2 ALT4 IN>;
 537                                                 led     = <&pio17 3 ALT4 OUT>;
 538                                         };
 539                                 };
 540                         };
 541                         mmc1 {
 542                                 pinctrl_mmc1: mmc1 {
 543                                         st,pins {
 544                                                 mmcclk  = <&pio15 0 ALT3 BIDIR_PU NICLK 0 CLK_B>;
 545                                                 data0   = <&pio13 7 ALT3 BIDIR_PU BYPASS 0>;
 546                                                 data1   = <&pio14 1 ALT3 BIDIR_PU BYPASS 0>;
 547                                                 data2   = <&pio14 2 ALT3 BIDIR_PU BYPASS 0>;
 548                                                 data3   = <&pio14 3 ALT3 BIDIR_PU BYPASS 0>;
 549                                                 cmd     = <&pio15 4 ALT3 BIDIR_PU BYPASS 0>;
 550                                                 data4   = <&pio15 6 ALT3 BIDIR_PU BYPASS 0>;
 551                                                 data5   = <&pio15 7 ALT3 BIDIR_PU BYPASS 0>;
 552                                                 data6   = <&pio16 0 ALT3 BIDIR_PU BYPASS 0>;
 553                                                 data7   = <&pio16 1 ALT3 BIDIR_PU BYPASS 0>;
 554                                                 pwr     = <&pio16 2 ALT3 OUT>;
 555                                                 nreset  = <&pio13 6 ALT3 OUT>;
 556                                         };
 557                                 };
 558                         };
 559
 560                         usb {
 561                                 pinctrl_usb1: usb1 {
 562                                         st,pins {
 563                                                 oc-detect = <&pio18 0 ALT1 IN>;
 564                                                 pwr-enable = <&pio18 1 ALT1 OUT>;
 565                                         };
 566                                 };
 567                                 pinctrl_usb2: usb2 {
 568                                         st,pins {
 569                                                 oc-detect = <&pio18 2 ALT1 IN>;
 570                                                 pwr-enable = <&pio18 3 ALT1 OUT>;
 571                                         };
 572                                 };
 573                         };
 574
 575                         pwm0 {
 576                                 pinctrl_pwm0_chan1_default: pwm0-1-default {
 577                                         st,pins {
 578                                                 pwm-out    = <&pio13 2 ALT2 OUT>;
 579                                         };
 580                                 };
 581                                 pinctrl_pwm0_chan2_default: pwm0-2-default {
 582                                         st,pins {
 583                                                 pwm-out    = <&pio15 2 ALT4 OUT>;
 584                                         };
 585                                 };
 586                                 pinctrl_pwm0_chan3_default: pwm0-3-default {
 587                                         st,pins {
 588                                                 pwm-out    = <&pio17 4 ALT1 OUT>;
 589                                         };
 590                                 };
 591                         };
 592
 593                 };
 594
 595                 pin-controller-fvdp-fe {
 596                         #address-cells  = <1>;
 597                         #size-cells     = <1>;
 598                         compatible      = "st,stih416-fvdp-fe-pinctrl";
 599                         st,syscfg       = <&syscfg_fvdp_fe>;
 600                         reg             = <0xfd6bf080 0x4>;
 601                         reg-names       = "irqmux";
 602                         interrupts      = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 603                         interrupt-names = "irqmux";
 604                         ranges          = <0 0xfd6b0000 0x3000>;
 605
 606                         pio100: gpio@fd6b0000 {
 607                                 gpio-controller;
 608                                 #gpio-cells     = <1>;
 609                                 interrupt-controller;
 610                                 #interrupt-cells = <2>;
 611                                 reg             = <0 0x100>;
 612                                 st,bank-name    = "PIO100";
 613                         };
 614                         pio101: gpio@fd6b1000 {
 615                                 gpio-controller;
 616                                 #gpio-cells     = <1>;
 617                                 interrupt-controller;
 618                                 #interrupt-cells = <2>;
 619                                 reg             = <0x1000 0x100>;
 620                                 st,bank-name    = "PIO101";
 621                         };
 622                         pio102: gpio@fd6b2000 {
 623                                 gpio-controller;
 624                                 #gpio-cells     = <1>;
 625                                 interrupt-controller;
 626                                 #interrupt-cells = <2>;
 627                                 reg             = <0x2000 0x100>;
 628                                 st,bank-name    = "PIO102";
 629                         };
 630                 };
 631
 632                 pin-controller-fvdp-lite {
 633                         #address-cells  = <1>;
 634                         #size-cells     = <1>;
 635                         compatible      = "st,stih416-fvdp-lite-pinctrl";
 636                         st,syscfg               = <&syscfg_fvdp_lite>;
 637                         reg             = <0xfd33f080 0x4>;
 638                         reg-names       = "irqmux";
 639                         interrupts      = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 640                         interrupt-names = "irqmux";
 641                         ranges                  = <0 0xfd330000 0x5000>;
 642
 643                         pio103: gpio@fd330000 {
 644                                 gpio-controller;
 645                                 #gpio-cells     = <1>;
 646                                 interrupt-controller;
 647                                 #interrupt-cells = <2>;
 648                                 reg             = <0 0x100>;
 649                                 st,bank-name    = "PIO103";
 650                         };
 651                         pio104: gpio@fd331000 {
 652                                 gpio-controller;
 653                                 #gpio-cells     = <1>;
 654                                 interrupt-controller;
 655                                 #interrupt-cells = <2>;
 656                                 reg             = <0x1000 0x100>;
 657                                 st,bank-name    = "PIO104";
 658                         };
 659                         pio105: gpio@fd332000 {
 660                                 gpio-controller;
 661                                 #gpio-cells     = <1>;
 662                                 interrupt-controller;
 663                                 #interrupt-cells = <2>;
 664                                 reg             = <0x2000 0x100>;
 665                                 st,bank-name    = "PIO105";
 666                         };
 667                         pio106: gpio@fd333000 {
 668                                 gpio-controller;
 669                                 #gpio-cells     = <1>;
 670                                 interrupt-controller;
 671                                 #interrupt-cells = <2>;
 672                                 reg             = <0x3000 0x100>;
 673                                 st,bank-name    = "PIO106";
 674                         };
 675
 676                         pio107: gpio@fd334000 {
 677                                 gpio-controller;
 678                                 #gpio-cells     = <1>;
 679                                 interrupt-controller;
 680                                 #interrupt-cells = <2>;
 681                                 reg             = <0x4000 0x100>;
 682                                 st,bank-name    = "PIO107";
 683                                 st,retime-pin-mask = <0xf>;
 684                         };
 685                 };
 686         };
 687 };