arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts

   1 /dts-v1/;
   2
   3 #include "kirkwood.dtsi"
   4 #include "kirkwood-6281.dtsi"
   5
   6 / {
   7         model = "Iomega StorCenter ix2-200";
   8         compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
   9
  10         memory {
  11                 device_type = "memory";
  12                 reg = <0x00000000 0x10000000>;
  13         };
  14
  15         chosen {
  16                 bootargs = "console=ttyS0,115200n8 earlyprintk";
  17         };
  18
  19         ocp@f1000000 {
  20                 pinctrl: pinctrl@10000 {
  21                         pinctrl-0 = < &pmx_led_sata_brt_ctrl_1
  22                                       &pmx_led_sata_brt_ctrl_2
  23                                       &pmx_led_backup_brt_ctrl_1
  24                                       &pmx_led_backup_brt_ctrl_2
  25                                       &pmx_led_power_brt_ctrl_1
  26                                       &pmx_led_power_brt_ctrl_2
  27                                       &pmx_led_health_brt_ctrl_1
  28                                       &pmx_led_health_brt_ctrl_2
  29                                       &pmx_led_rebuild_brt_ctrl_1
  30                                       &pmx_led_rebuild_brt_ctrl_2 >;
  31                         pinctrl-names = "default";
  32
  33                         pmx_button_reset: pmx-button-reset {
  34                                 marvell,pins = "mpp12";
  35                                 marvell,function = "gpio";
  36                         };
  37                         pmx_button_power: pmx-button-power {
  38                                 marvell,pins = "mpp14";
  39                                 marvell,function = "gpio";
  40                         };
  41                         pmx_led_backup: pmx-led-backup {
  42                                 marvell,pins = "mpp15";
  43                                 marvell,function = "gpio";
  44                         };
  45                         pmx_led_power: pmx-led-power {
  46                                 marvell,pins = "mpp16";
  47                                 marvell,function = "gpio";
  48                         };
  49                         pmx_button_otb: pmx-button-otb {
  50                                 marvell,pins = "mpp35";
  51                                 marvell,function = "gpio";
  52                         };
  53                         pmx_led_rebuild: pmx-led-rebuild {
  54                                 marvell,pins = "mpp36";
  55                                 marvell,function = "gpio";
  56                         };
  57                         pmx_led_health: pmx-led_health {
  58                                 marvell,pins = "mpp37";
  59                                 marvell,function = "gpio";
  60                         };
  61                         pmx_led_sata_brt_ctrl_1: pmx-led-sata-brt-ctrl-1 {
  62                                 marvell,pins = "mpp38";
  63                                 marvell,function = "gpio";
  64                         };
  65                         pmx_led_sata_brt_ctrl_2: pmx-led-sata-brt-ctrl-2 {
  66                                 marvell,pins = "mpp39";
  67                                 marvell,function = "gpio";
  68                         };
  69                         pmx_led_backup_brt_ctrl_1: pmx-led-backup-brt-ctrl-1 {
  70                                 marvell,pins = "mpp40";
  71                                 marvell,function = "gpio";
  72                         };
  73                         pmx_led_backup_brt_ctrl_2: pmx-led-backup-brt-ctrl-2 {
  74                                 marvell,pins = "mpp41";
  75                                 marvell,function = "gpio";
  76                         };
  77                         pmx_led_power_brt_ctrl_1: pmx-led-power-brt-ctrl-1 {
  78                                 marvell,pins = "mpp42";
  79                                 marvell,function = "gpio";
  80                         };
  81                         pmx_led_power_brt_ctrl_2: pmx-led-power-brt-ctrl-2 {
  82                                 marvell,pins = "mpp43";
  83                                 marvell,function = "gpio";
  84                         };
  85                         pmx_led_health_brt_ctrl_1: pmx-led-health-brt-ctrl-1 {
  86                                 marvell,pins = "mpp44";
  87                                 marvell,function = "gpio";
  88                         };
  89                         pmx_led_health_brt_ctrl_2: pmx-led-health-brt-ctrl-2 {
  90                                 marvell,pins = "mpp45";
  91                                 marvell,function = "gpio";
  92                         };
  93                         pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 {
  94                                 marvell,pins = "mpp46";
  95                                 marvell,function = "gpio";
  96                         };
  97                         pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 {
  98                                 marvell,pins = "mpp47";
  99                                 marvell,function = "gpio";
 100                         };
 101
 102                 };
 103                 i2c@11000 {
 104                         status = "okay";
 105
 106                         lm63: lm63@4c {
 107                                 compatible = "national,lm63";
 108                                 reg = <0x4c>;
 109                         };
 110                 };
 111
 112                 serial@12000 {
 113                         status = "ok";
 114                 };
 115
 116                 sata@80000 {
 117                         status = "okay";
 118                         nr-ports = <2>;
 119                 };
 120
 121         };
 122         gpio-leds {
 123                 compatible = "gpio-leds";
 124                 pinctrl-0 = < &pmx_led_backup &pmx_led_power
 125                               &pmx_led_rebuild &pmx_led_health >;
 126                 pinctrl-names = "default";
 127
 128                 power_led {
 129                         label = "status:white:power_led";
 130                         gpios = <&gpio0 16 0>;
 131                         linux,default-trigger = "default-on";
 132                 };
 133                 rebuild_led {
 134                         label = "status:white:rebuild_led";
 135                         gpios = <&gpio1 4 0>;
 136                 };
 137                 health_led {
 138                         label = "status:red:health_led";
 139                         gpios = <&gpio1 5 0>;
 140                 };
 141                 backup_led {
 142                         label = "status:blue:backup_led";
 143                         gpios = <&gpio0 15 0>;
 144                 };
 145         };
 146         gpio-keys {
 147                 compatible = "gpio-keys";
 148                 #address-cells = <1>;
 149                 #size-cells = <0>;
 150                 pinctrl-0 = <&pmx_button_reset &pmx_button_power
 151                              &pmx_button_otb>;
 152                 pinctrl-names = "default";
 153
 154
 155                 Power {
 156                         label = "Power Button";
 157                         linux,code = <116>;
 158                         gpios = <&gpio0 14 1>;
 159                 };
 160                 Reset {
 161                         label = "Reset Button";
 162                         linux,code = <0x198>;
 163                         gpios = <&gpio0 12 1>;
 164                 };
 165                 OTB {
 166                         label = "OTB Button";
 167                         linux,code = <133>;
 168                         gpios = <&gpio1 3 1>;
 169                 };
 170         };
 171 };
 172
 173 &nand {
 174         status = "okay";
 175
 176         partition@0 {
 177                 label = "u-boot";
 178                 reg = <0x0000000 0x100000>;
 179                 read-only;
 180         };
 181
 182         partition@a0000 {
 183                 label = "env";
 184                 reg = <0xa0000 0x20000>;
 185                 read-only;
 186         };
 187
 188         partition@100000 {
 189                 label = "uImage";
 190                 reg = <0x100000 0x300000>;
 191         };
 192
 193         partition@400000 {
 194                 label = "uInitrd";
 195                 reg = <0x540000 0x1000000>;
 196         };
 197 };
 198
 199 &mdio {
 200         status = "okay";
 201
 202         ethphy1: ethernet-phy@11 {
 203                 device_type = "ethernet-phy";
 204                 reg = <11>;
 205         };
 206 };
 207
 208 &eth0 {
 209         status = "okay";
 210         ethernet0-port@0 {
 211                 speed = <1000>;
 212                 duplex = <1>;
 213         };
 214 };
 215
 216 &eth1 {
 217         status = "okay";
 218         ethernet1-port@0 {
 219                 phy-handle = <&ethphy1>;
 220         };
 221 };