arch/arm/boot/dts/imx28.dtsi

   1 /*
   2  * Copyright 2012 Freescale Semiconductor, Inc.
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include "skeleton.dtsi"
  13 #include "imx28-pinfunc.h"
  14
  15 / {
  16         interrupt-parent = <&icoll>;
  17
  18         aliases {
  19                 ethernet0 = &mac0;
  20                 ethernet1 = &mac1;
  21                 gpio0 = &gpio0;
  22                 gpio1 = &gpio1;
  23                 gpio2 = &gpio2;
  24                 gpio3 = &gpio3;
  25                 gpio4 = &gpio4;
  26                 saif0 = &saif0;
  27                 saif1 = &saif1;
  28                 serial0 = &auart0;
  29                 serial1 = &auart1;
  30                 serial2 = &auart2;
  31                 serial3 = &auart3;
  32                 serial4 = &auart4;
  33                 spi0 = &ssp1;
  34                 spi1 = &ssp2;
  35         };
  36
  37         cpus {
  38                 #address-cells = <0>;
  39                 #size-cells = <0>;
  40
  41                 cpu {
  42                         compatible = "arm,arm926ej-s";
  43                         device_type = "cpu";
  44                 };
  45         };
  46
  47         apb@80000000 {
  48                 compatible = "simple-bus";
  49                 #address-cells = <1>;
  50                 #size-cells = <1>;
  51                 reg = <0x80000000 0x80000>;
  52                 ranges;
  53
  54                 apbh@80000000 {
  55                         compatible = "simple-bus";
  56                         #address-cells = <1>;
  57                         #size-cells = <1>;
  58                         reg = <0x80000000 0x3c900>;
  59                         ranges;
  60
  61                         icoll: interrupt-controller@80000000 {
  62                                 compatible = "fsl,imx28-icoll", "fsl,icoll";
  63                                 interrupt-controller;
  64                                 #interrupt-cells = <1>;
  65                                 reg = <0x80000000 0x2000>;
  66                         };
  67
  68                         hsadc: hsadc@80002000 {
  69                                 reg = <0x80002000 0x2000>;
  70                                 interrupts = <13>;
  71                                 dmas = <&dma_apbh 12>;
  72                                 dma-names = "rx";
  73                                 status = "disabled";
  74                         };
  75
  76                         dma_apbh: dma-apbh@80004000 {
  77                                 compatible = "fsl,imx28-dma-apbh";
  78                                 reg = <0x80004000 0x2000>;
  79                                 interrupts = <82 83 84 85
  80                                               88 88 88 88
  81                                               88 88 88 88
  82                                               87 86 0 0>;
  83                                 interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
  84                                                   "gpmi0", "gmpi1", "gpmi2", "gmpi3",
  85                                                   "gpmi4", "gmpi5", "gpmi6", "gmpi7",
  86                                                   "hsadc", "lcdif", "empty", "empty";
  87                                 #dma-cells = <1>;
  88                                 dma-channels = <16>;
  89                                 clocks = <&clks 25>;
  90                         };
  91
  92                         perfmon: perfmon@80006000 {
  93                                 reg = <0x80006000 0x800>;
  94                                 interrupts = <27>;
  95                                 status = "disabled";
  96                         };
  97
  98                         gpmi: gpmi-nand@8000c000 {
  99                                 compatible = "fsl,imx28-gpmi-nand";
 100                                 #address-cells = <1>;
 101                                 #size-cells = <1>;
 102                                 reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
 103                                 reg-names = "gpmi-nand", "bch";
 104                                 interrupts = <41>;
 105                                 interrupt-names = "bch";
 106                                 clocks = <&clks 50>;
 107                                 clock-names = "gpmi_io";
 108                                 dmas = <&dma_apbh 4>;
 109                                 dma-names = "rx-tx";
 110                                 status = "disabled";
 111                         };
 112
 113                         ssp0: ssp@80010000 {
 114                                 #address-cells = <1>;
 115                                 #size-cells = <0>;
 116                                 reg = <0x80010000 0x2000>;
 117                                 interrupts = <96>;
 118                                 clocks = <&clks 46>;
 119                                 dmas = <&dma_apbh 0>;
 120                                 dma-names = "rx-tx";
 121                                 status = "disabled";
 122                         };
 123
 124                         ssp1: ssp@80012000 {
 125                                 #address-cells = <1>;
 126                                 #size-cells = <0>;
 127                                 reg = <0x80012000 0x2000>;
 128                                 interrupts = <97>;
 129                                 clocks = <&clks 47>;
 130                                 dmas = <&dma_apbh 1>;
 131                                 dma-names = "rx-tx";
 132                                 status = "disabled";
 133                         };
 134
 135                         ssp2: ssp@80014000 {
 136                                 #address-cells = <1>;
 137                                 #size-cells = <0>;
 138                                 reg = <0x80014000 0x2000>;
 139                                 interrupts = <98>;
 140                                 clocks = <&clks 48>;
 141                                 dmas = <&dma_apbh 2>;
 142                                 dma-names = "rx-tx";
 143                                 status = "disabled";
 144                         };
 145
 146                         ssp3: ssp@80016000 {
 147                                 #address-cells = <1>;
 148                                 #size-cells = <0>;
 149                                 reg = <0x80016000 0x2000>;
 150                                 interrupts = <99>;
 151                                 clocks = <&clks 49>;
 152                                 dmas = <&dma_apbh 3>;
 153                                 dma-names = "rx-tx";
 154                                 status = "disabled";
 155                         };
 156
 157                         pinctrl: pinctrl@80018000 {
 158                                 #address-cells = <1>;
 159                                 #size-cells = <0>;
 160                                 compatible = "fsl,imx28-pinctrl", "simple-bus";
 161                                 reg = <0x80018000 0x2000>;
 162
 163                                 gpio0: gpio@0 {
 164                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 165                                         interrupts = <127>;
 166                                         gpio-controller;
 167                                         #gpio-cells = <2>;
 168                                         interrupt-controller;
 169                                         #interrupt-cells = <2>;
 170                                 };
 171
 172                                 gpio1: gpio@1 {
 173                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 174                                         interrupts = <126>;
 175                                         gpio-controller;
 176                                         #gpio-cells = <2>;
 177                                         interrupt-controller;
 178                                         #interrupt-cells = <2>;
 179                                 };
 180
 181                                 gpio2: gpio@2 {
 182                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 183                                         interrupts = <125>;
 184                                         gpio-controller;
 185                                         #gpio-cells = <2>;
 186                                         interrupt-controller;
 187                                         #interrupt-cells = <2>;
 188                                 };
 189
 190                                 gpio3: gpio@3 {
 191                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 192                                         interrupts = <124>;
 193                                         gpio-controller;
 194                                         #gpio-cells = <2>;
 195                                         interrupt-controller;
 196                                         #interrupt-cells = <2>;
 197                                 };
 198
 199                                 gpio4: gpio@4 {
 200                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 201                                         interrupts = <123>;
 202                                         gpio-controller;
 203                                         #gpio-cells = <2>;
 204                                         interrupt-controller;
 205                                         #interrupt-cells = <2>;
 206                                 };
 207
 208                                 duart_pins_a: duart@0 {
 209                                         reg = <0>;
 210                                         fsl,pinmux-ids = <
 211                                                 MX28_PAD_PWM0__DUART_RX
 212                                                 MX28_PAD_PWM1__DUART_TX
 213                                         >;
 214                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 215                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 216                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 217                                 };
 218
 219                                 duart_pins_b: duart@1 {
 220                                         reg = <1>;
 221                                         fsl,pinmux-ids = <
 222                                                 MX28_PAD_AUART0_CTS__DUART_RX
 223                                                 MX28_PAD_AUART0_RTS__DUART_TX
 224                                         >;
 225                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 226                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 227                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 228                                 };
 229
 230                                 duart_4pins_a: duart-4pins@0 {
 231                                         reg = <0>;
 232                                         fsl,pinmux-ids = <
 233                                                 MX28_PAD_AUART0_CTS__DUART_RX
 234                                                 MX28_PAD_AUART0_RTS__DUART_TX
 235                                                 MX28_PAD_AUART0_RX__DUART_CTS
 236                                                 MX28_PAD_AUART0_TX__DUART_RTS
 237                                         >;
 238                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 239                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 240                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 241                                 };
 242
 243                                 gpmi_pins_a: gpmi-nand@0 {
 244                                         reg = <0>;
 245                                         fsl,pinmux-ids = <
 246                                                 MX28_PAD_GPMI_D00__GPMI_D0
 247                                                 MX28_PAD_GPMI_D01__GPMI_D1
 248                                                 MX28_PAD_GPMI_D02__GPMI_D2
 249                                                 MX28_PAD_GPMI_D03__GPMI_D3
 250                                                 MX28_PAD_GPMI_D04__GPMI_D4
 251                                                 MX28_PAD_GPMI_D05__GPMI_D5
 252                                                 MX28_PAD_GPMI_D06__GPMI_D6
 253                                                 MX28_PAD_GPMI_D07__GPMI_D7
 254                                                 MX28_PAD_GPMI_CE0N__GPMI_CE0N
 255                                                 MX28_PAD_GPMI_RDY0__GPMI_READY0
 256                                                 MX28_PAD_GPMI_RDN__GPMI_RDN
 257                                                 MX28_PAD_GPMI_WRN__GPMI_WRN
 258                                                 MX28_PAD_GPMI_ALE__GPMI_ALE
 259                                                 MX28_PAD_GPMI_CLE__GPMI_CLE
 260                                                 MX28_PAD_GPMI_RESETN__GPMI_RESETN
 261                                         >;
 262                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 263                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 264                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 265                                 };
 266
 267                                 gpmi_status_cfg: gpmi-status-cfg {
 268                                         fsl,pinmux-ids = <
 269                                                 MX28_PAD_GPMI_RDN__GPMI_RDN
 270                                                 MX28_PAD_GPMI_WRN__GPMI_WRN
 271                                                 MX28_PAD_GPMI_RESETN__GPMI_RESETN
 272                                         >;
 273                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 274                                 };
 275
 276                                 auart0_pins_a: auart0@0 {
 277                                         reg = <0>;
 278                                         fsl,pinmux-ids = <
 279                                                 MX28_PAD_AUART0_RX__AUART0_RX
 280                                                 MX28_PAD_AUART0_TX__AUART0_TX
 281                                                 MX28_PAD_AUART0_CTS__AUART0_CTS
 282                                                 MX28_PAD_AUART0_RTS__AUART0_RTS
 283                                         >;
 284                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 285                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 286                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 287                                 };
 288
 289                                 auart0_2pins_a: auart0-2pins@0 {
 290                                         reg = <0>;
 291                                         fsl,pinmux-ids = <
 292                                                 MX28_PAD_AUART0_RX__AUART0_RX
 293                                                 MX28_PAD_AUART0_TX__AUART0_TX
 294                                         >;
 295                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 296                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 297                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 298                                 };
 299
 300                                 auart1_pins_a: auart1@0 {
 301                                         reg = <0>;
 302                                         fsl,pinmux-ids = <
 303                                                 MX28_PAD_AUART1_RX__AUART1_RX
 304                                                 MX28_PAD_AUART1_TX__AUART1_TX
 305                                                 MX28_PAD_AUART1_CTS__AUART1_CTS
 306                                                 MX28_PAD_AUART1_RTS__AUART1_RTS
 307                                         >;
 308                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 309                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 310                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 311                                 };
 312
 313                                 auart1_2pins_a: auart1-2pins@0 {
 314                                         reg = <0>;
 315                                         fsl,pinmux-ids = <
 316                                                 MX28_PAD_AUART1_RX__AUART1_RX
 317                                                 MX28_PAD_AUART1_TX__AUART1_TX
 318                                         >;
 319                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 320                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 321                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 322                                 };
 323
 324                                 auart2_2pins_a: auart2-2pins@0 {
 325                                         reg = <0>;
 326                                         fsl,pinmux-ids = <
 327                                                 MX28_PAD_SSP2_SCK__AUART2_RX
 328                                                 MX28_PAD_SSP2_MOSI__AUART2_TX
 329                                         >;
 330                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 331                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 332                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 333                                 };
 334
 335                                 auart2_2pins_b: auart2-2pins@1 {
 336                                         reg = <1>;
 337                                         fsl,pinmux-ids = <
 338                                                 MX28_PAD_AUART2_RX__AUART2_RX
 339                                                 MX28_PAD_AUART2_TX__AUART2_TX
 340                                         >;
 341                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 342                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 343                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 344                                 };
 345
 346                                 auart3_pins_a: auart3@0 {
 347                                         reg = <0>;
 348                                         fsl,pinmux-ids = <
 349                                                 MX28_PAD_AUART3_RX__AUART3_RX
 350                                                 MX28_PAD_AUART3_TX__AUART3_TX
 351                                                 MX28_PAD_AUART3_CTS__AUART3_CTS
 352                                                 MX28_PAD_AUART3_RTS__AUART3_RTS
 353                                         >;
 354                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 355                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 356                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 357                                 };
 358
 359                                 auart3_2pins_a: auart3-2pins@0 {
 360                                         reg = <0>;
 361                                         fsl,pinmux-ids = <
 362                                                 MX28_PAD_SSP2_MISO__AUART3_RX
 363                                                 MX28_PAD_SSP2_SS0__AUART3_TX
 364                                         >;
 365                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 366                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 367                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 368                                 };
 369
 370                                 auart3_2pins_b: auart3-2pins@1 {
 371                                         reg = <1>;
 372                                         fsl,pinmux-ids = <
 373                                                 MX28_PAD_AUART3_RX__AUART3_RX
 374                                                 MX28_PAD_AUART3_TX__AUART3_TX
 375                                         >;
 376                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 377                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 378                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 379                                 };
 380
 381                                 auart4_2pins_a: auart4@0 {
 382                                         reg = <0>;
 383                                         fsl,pinmux-ids = <
 384                                                 MX28_PAD_SSP3_SCK__AUART4_TX
 385                                                 MX28_PAD_SSP3_MOSI__AUART4_RX
 386                                         >;
 387                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 388                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 389                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 390                                 };
 391
 392                                 mac0_pins_a: mac0@0 {
 393                                         reg = <0>;
 394                                         fsl,pinmux-ids = <
 395                                                 MX28_PAD_ENET0_MDC__ENET0_MDC
 396                                                 MX28_PAD_ENET0_MDIO__ENET0_MDIO
 397                                                 MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
 398                                                 MX28_PAD_ENET0_RXD0__ENET0_RXD0
 399                                                 MX28_PAD_ENET0_RXD1__ENET0_RXD1
 400                                                 MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
 401                                                 MX28_PAD_ENET0_TXD0__ENET0_TXD0
 402                                                 MX28_PAD_ENET0_TXD1__ENET0_TXD1
 403                                                 MX28_PAD_ENET_CLK__CLKCTRL_ENET
 404                                         >;
 405                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 406                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 407                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 408                                 };
 409
 410                                 mac1_pins_a: mac1@0 {
 411                                         reg = <0>;
 412                                         fsl,pinmux-ids = <
 413                                                 MX28_PAD_ENET0_CRS__ENET1_RX_EN
 414                                                 MX28_PAD_ENET0_RXD2__ENET1_RXD0
 415                                                 MX28_PAD_ENET0_RXD3__ENET1_RXD1
 416                                                 MX28_PAD_ENET0_COL__ENET1_TX_EN
 417                                                 MX28_PAD_ENET0_TXD2__ENET1_TXD0
 418                                                 MX28_PAD_ENET0_TXD3__ENET1_TXD1
 419                                         >;
 420                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 421                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 422                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 423                                 };
 424
 425                                 mmc0_8bit_pins_a: mmc0-8bit@0 {
 426                                         reg = <0>;
 427                                         fsl,pinmux-ids = <
 428                                                 MX28_PAD_SSP0_DATA0__SSP0_D0
 429                                                 MX28_PAD_SSP0_DATA1__SSP0_D1
 430                                                 MX28_PAD_SSP0_DATA2__SSP0_D2
 431                                                 MX28_PAD_SSP0_DATA3__SSP0_D3
 432                                                 MX28_PAD_SSP0_DATA4__SSP0_D4
 433                                                 MX28_PAD_SSP0_DATA5__SSP0_D5
 434                                                 MX28_PAD_SSP0_DATA6__SSP0_D6
 435                                                 MX28_PAD_SSP0_DATA7__SSP0_D7
 436                                                 MX28_PAD_SSP0_CMD__SSP0_CMD
 437                                                 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 438                                                 MX28_PAD_SSP0_SCK__SSP0_SCK
 439                                         >;
 440                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 441                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 442                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 443                                 };
 444
 445                                 mmc0_4bit_pins_a: mmc0-4bit@0 {
 446                                         reg = <0>;
 447                                         fsl,pinmux-ids = <
 448                                                 MX28_PAD_SSP0_DATA0__SSP0_D0
 449                                                 MX28_PAD_SSP0_DATA1__SSP0_D1
 450                                                 MX28_PAD_SSP0_DATA2__SSP0_D2
 451                                                 MX28_PAD_SSP0_DATA3__SSP0_D3
 452                                                 MX28_PAD_SSP0_CMD__SSP0_CMD
 453                                                 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 454                                                 MX28_PAD_SSP0_SCK__SSP0_SCK
 455                                         >;
 456                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 457                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 458                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 459                                 };
 460
 461                                 mmc0_cd_cfg: mmc0-cd-cfg {
 462                                         fsl,pinmux-ids = <
 463                                                 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 464                                         >;
 465                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 466                                 };
 467
 468                                 mmc0_sck_cfg: mmc0-sck-cfg {
 469                                         fsl,pinmux-ids = <
 470                                                 MX28_PAD_SSP0_SCK__SSP0_SCK
 471                                         >;
 472                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 473                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 474                                 };
 475
 476                                 mmc2_4bit_pins_a: mmc2-4bit@0 {
 477                                         reg = <0>;
 478                                         fsl,pinmux-ids = <
 479                                                 MX28_PAD_SSP0_DATA4__SSP2_D0
 480                                                 MX28_PAD_SSP1_SCK__SSP2_D1
 481                                                 MX28_PAD_SSP1_CMD__SSP2_D2
 482                                                 MX28_PAD_SSP0_DATA5__SSP2_D3
 483                                                 MX28_PAD_SSP0_DATA6__SSP2_CMD
 484                                                 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
 485                                                 MX28_PAD_SSP0_DATA7__SSP2_SCK
 486                                         >;
 487                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 488                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 489                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 490                                 };
 491
 492                                 mmc2_cd_cfg: mmc2-cd-cfg {
 493                                         fsl,pinmux-ids = <
 494                                                 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
 495                                         >;
 496                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 497                                 };
 498
 499                                 mmc2_sck_cfg: mmc2-sck-cfg {
 500                                         fsl,pinmux-ids = <
 501                                                 MX28_PAD_SSP0_DATA7__SSP2_SCK
 502                                         >;
 503                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 504                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 505                                 };
 506
 507                                 i2c0_pins_a: i2c0@0 {
 508                                         reg = <0>;
 509                                         fsl,pinmux-ids = <
 510                                                 MX28_PAD_I2C0_SCL__I2C0_SCL
 511                                                 MX28_PAD_I2C0_SDA__I2C0_SDA
 512                                         >;
 513                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 514                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 515                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 516                                 };
 517
 518                                 i2c0_pins_b: i2c0@1 {
 519                                         reg = <1>;
 520                                         fsl,pinmux-ids = <
 521                                                 MX28_PAD_AUART0_RX__I2C0_SCL
 522                                                 MX28_PAD_AUART0_TX__I2C0_SDA
 523                                         >;
 524                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 525                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 526                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 527                                 };
 528
 529                                 i2c1_pins_a: i2c1@0 {
 530                                         reg = <0>;
 531                                         fsl,pinmux-ids = <
 532                                                 MX28_PAD_PWM0__I2C1_SCL
 533                                                 MX28_PAD_PWM1__I2C1_SDA
 534                                         >;
 535                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 536                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 537                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 538                                 };
 539
 540                                 saif0_pins_a: saif0@0 {
 541                                         reg = <0>;
 542                                         fsl,pinmux-ids = <
 543                                                 MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
 544                                                 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
 545                                                 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
 546                                                 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
 547                                         >;
 548                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 549                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 550                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 551                                 };
 552
 553                                 saif0_pins_b: saif0@1 {
 554                                         reg = <1>;
 555                                         fsl,pinmux-ids = <
 556                                                 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
 557                                                 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
 558                                                 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
 559                                         >;
 560                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 561                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 562                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 563                                 };
 564
 565                                 saif1_pins_a: saif1@0 {
 566                                         reg = <0>;
 567                                         fsl,pinmux-ids = <
 568                                                 MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
 569                                         >;
 570                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 571                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 572                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 573                                 };
 574
 575                                 pwm0_pins_a: pwm0@0 {
 576                                         reg = <0>;
 577                                         fsl,pinmux-ids = <
 578                                                 MX28_PAD_PWM0__PWM_0
 579                                         >;
 580                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 581                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 582                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 583                                 };
 584
 585                                 pwm2_pins_a: pwm2@0 {
 586                                         reg = <0>;
 587                                         fsl,pinmux-ids = <
 588                                                 MX28_PAD_PWM2__PWM_2
 589                                         >;
 590                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 591                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 592                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 593                                 };
 594
 595                                 pwm3_pins_a: pwm3@0 {
 596                                         reg = <0>;
 597                                         fsl,pinmux-ids = <
 598                                                 MX28_PAD_PWM3__PWM_3
 599                                         >;
 600                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 601                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 602                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 603                                 };
 604
 605                                 pwm3_pins_b: pwm3@1 {
 606                                         reg = <1>;
 607                                         fsl,pinmux-ids = <
 608                                                 MX28_PAD_SAIF0_MCLK__PWM_3
 609                                         >;
 610                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 611                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 612                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 613                                 };
 614
 615                                 pwm4_pins_a: pwm4@0 {
 616                                         reg = <0>;
 617                                         fsl,pinmux-ids = <
 618                                                 MX28_PAD_PWM4__PWM_4
 619                                         >;
 620                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 621                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 622                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 623                                 };
 624
 625                                 lcdif_24bit_pins_a: lcdif-24bit@0 {
 626                                         reg = <0>;
 627                                         fsl,pinmux-ids = <
 628                                                 MX28_PAD_LCD_D00__LCD_D0
 629                                                 MX28_PAD_LCD_D01__LCD_D1
 630                                                 MX28_PAD_LCD_D02__LCD_D2
 631                                                 MX28_PAD_LCD_D03__LCD_D3
 632                                                 MX28_PAD_LCD_D04__LCD_D4
 633                                                 MX28_PAD_LCD_D05__LCD_D5
 634                                                 MX28_PAD_LCD_D06__LCD_D6
 635                                                 MX28_PAD_LCD_D07__LCD_D7
 636                                                 MX28_PAD_LCD_D08__LCD_D8
 637                                                 MX28_PAD_LCD_D09__LCD_D9
 638                                                 MX28_PAD_LCD_D10__LCD_D10
 639                                                 MX28_PAD_LCD_D11__LCD_D11
 640                                                 MX28_PAD_LCD_D12__LCD_D12
 641                                                 MX28_PAD_LCD_D13__LCD_D13
 642                                                 MX28_PAD_LCD_D14__LCD_D14
 643                                                 MX28_PAD_LCD_D15__LCD_D15
 644                                                 MX28_PAD_LCD_D16__LCD_D16
 645                                                 MX28_PAD_LCD_D17__LCD_D17
 646                                                 MX28_PAD_LCD_D18__LCD_D18
 647                                                 MX28_PAD_LCD_D19__LCD_D19
 648                                                 MX28_PAD_LCD_D20__LCD_D20
 649                                                 MX28_PAD_LCD_D21__LCD_D21
 650                                                 MX28_PAD_LCD_D22__LCD_D22
 651                                                 MX28_PAD_LCD_D23__LCD_D23
 652                                         >;
 653                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 654                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 655                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 656                                 };
 657
 658                                 lcdif_16bit_pins_a: lcdif-16bit@0 {
 659                                         reg = <0>;
 660                                         fsl,pinmux-ids = <
 661                                                 MX28_PAD_LCD_D00__LCD_D0
 662                                                 MX28_PAD_LCD_D01__LCD_D1
 663                                                 MX28_PAD_LCD_D02__LCD_D2
 664                                                 MX28_PAD_LCD_D03__LCD_D3
 665                                                 MX28_PAD_LCD_D04__LCD_D4
 666                                                 MX28_PAD_LCD_D05__LCD_D5
 667                                                 MX28_PAD_LCD_D06__LCD_D6
 668                                                 MX28_PAD_LCD_D07__LCD_D7
 669                                                 MX28_PAD_LCD_D08__LCD_D8
 670                                                 MX28_PAD_LCD_D09__LCD_D9
 671                                                 MX28_PAD_LCD_D10__LCD_D10
 672                                                 MX28_PAD_LCD_D11__LCD_D11
 673                                                 MX28_PAD_LCD_D12__LCD_D12
 674                                                 MX28_PAD_LCD_D13__LCD_D13
 675                                                 MX28_PAD_LCD_D14__LCD_D14
 676                                                 MX28_PAD_LCD_D15__LCD_D15
 677                                         >;
 678                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 679                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 680                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 681                                 };
 682
 683                                 lcdif_sync_pins_a: lcdif-sync@0 {
 684                                         reg = <0>;
 685                                         fsl,pinmux-ids = <
 686                                                 MX28_PAD_LCD_RS__LCD_DOTCLK
 687                                                 MX28_PAD_LCD_CS__LCD_ENABLE
 688                                                 MX28_PAD_LCD_RD_E__LCD_VSYNC
 689                                                 MX28_PAD_LCD_WR_RWN__LCD_HSYNC
 690                                         >;
 691                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 692                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 693                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 694                                 };
 695
 696                                 can0_pins_a: can0@0 {
 697                                         reg = <0>;
 698                                         fsl,pinmux-ids = <
 699                                                 MX28_PAD_GPMI_RDY2__CAN0_TX
 700                                                 MX28_PAD_GPMI_RDY3__CAN0_RX
 701                                         >;
 702                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 703                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 704                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 705                                 };
 706
 707                                 can1_pins_a: can1@0 {
 708                                         reg = <0>;
 709                                         fsl,pinmux-ids = <
 710                                                 MX28_PAD_GPMI_CE2N__CAN1_TX
 711                                                 MX28_PAD_GPMI_CE3N__CAN1_RX
 712                                         >;
 713                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 714                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 715                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 716                                 };
 717
 718                                 spi2_pins_a: spi2@0 {
 719                                         reg = <0>;
 720                                         fsl,pinmux-ids = <
 721                                                 MX28_PAD_SSP2_SCK__SSP2_SCK
 722                                                 MX28_PAD_SSP2_MOSI__SSP2_CMD
 723                                                 MX28_PAD_SSP2_MISO__SSP2_D0
 724                                                 MX28_PAD_SSP2_SS0__SSP2_D3
 725                                         >;
 726                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 727                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 728                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 729                                 };
 730
 731                                 spi3_pins_a: spi3@0 {
 732                                         reg = <0>;
 733                                         fsl,pinmux-ids = <
 734                                                 MX28_PAD_AUART2_RX__SSP3_D4
 735                                                 MX28_PAD_AUART2_TX__SSP3_D5
 736                                                 MX28_PAD_SSP3_SCK__SSP3_SCK
 737                                                 MX28_PAD_SSP3_MOSI__SSP3_CMD
 738                                                 MX28_PAD_SSP3_MISO__SSP3_D0
 739                                                 MX28_PAD_SSP3_SS0__SSP3_D3
 740                                         >;
 741                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 742                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 743                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 744                                 };
 745
 746                                 usbphy0_pins_a: usbphy0@0 {
 747                                         reg = <0>;
 748                                         fsl,pinmux-ids = <
 749                                                 MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
 750                                         >;
 751                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 752                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 753                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 754                                 };
 755
 756                                 usbphy0_pins_b: usbphy0@1 {
 757                                         reg = <1>;
 758                                         fsl,pinmux-ids = <
 759                                                 MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
 760                                         >;
 761                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 762                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 763                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 764                                 };
 765
 766                                 usbphy1_pins_a: usbphy1@0 {
 767                                         reg = <0>;
 768                                         fsl,pinmux-ids = <
 769                                                 MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
 770                                         >;
 771                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 772                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 773                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 774                                 };
 775
 776                                 usb0_id_pins_a: usb0id@0 {
 777                                         reg = <0>;
 778                                         fsl,pinmux-ids = <
 779                                                 MX28_PAD_AUART1_RTS__USB0_ID
 780                                         >;
 781                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 782                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 783                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 784                                 };
 785                         };
 786
 787                         digctl: digctl@8001c000 {
 788                                 compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
 789                                 reg = <0x8001c000 0x2000>;
 790                                 interrupts = <89>;
 791                                 status = "disabled";
 792                         };
 793
 794                         etm: etm@80022000 {
 795                                 reg = <0x80022000 0x2000>;
 796                                 status = "disabled";
 797                         };
 798
 799                         dma_apbx: dma-apbx@80024000 {
 800                                 compatible = "fsl,imx28-dma-apbx";
 801                                 reg = <0x80024000 0x2000>;
 802                                 interrupts = <78 79 66 0
 803                                               80 81 68 69
 804                                               70 71 72 73
 805                                               74 75 76 77>;
 806                                 interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
 807                                                   "saif0", "saif1", "i2c0", "i2c1",
 808                                                   "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
 809                                                   "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
 810                                 #dma-cells = <1>;
 811                                 dma-channels = <16>;
 812                                 clocks = <&clks 26>;
 813                         };
 814
 815                         dcp: dcp@80028000 {
 816                                 reg = <0x80028000 0x2000>;
 817                                 interrupts = <52 53 54>;
 818                                 compatible = "fsl-dcp";
 819                         };
 820
 821                         pxp: pxp@8002a000 {
 822                                 reg = <0x8002a000 0x2000>;
 823                                 interrupts = <39>;
 824                                 status = "disabled";
 825                         };
 826
 827                         ocotp: ocotp@8002c000 {
 828                                 compatible = "fsl,ocotp";
 829                                 reg = <0x8002c000 0x2000>;
 830                                 status = "disabled";
 831                         };
 832
 833                         axi-ahb@8002e000 {
 834                                 reg = <0x8002e000 0x2000>;
 835                                 status = "disabled";
 836                         };
 837
 838                         lcdif: lcdif@80030000 {
 839                                 compatible = "fsl,imx28-lcdif";
 840                                 reg = <0x80030000 0x2000>;
 841                                 interrupts = <38>;
 842                                 clocks = <&clks 55>;
 843                                 dmas = <&dma_apbh 13>;
 844                                 dma-names = "rx";
 845                                 status = "disabled";
 846                         };
 847
 848                         can0: can@80032000 {
 849                                 compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
 850                                 reg = <0x80032000 0x2000>;
 851                                 interrupts = <8>;
 852                                 clocks = <&clks 58>, <&clks 58>;
 853                                 clock-names = "ipg", "per";
 854                                 status = "disabled";
 855                         };
 856
 857                         can1: can@80034000 {
 858                                 compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
 859                                 reg = <0x80034000 0x2000>;
 860                                 interrupts = <9>;
 861                                 clocks = <&clks 59>, <&clks 59>;
 862                                 clock-names = "ipg", "per";
 863                                 status = "disabled";
 864                         };
 865
 866                         simdbg: simdbg@8003c000 {
 867                                 reg = <0x8003c000 0x200>;
 868                                 status = "disabled";
 869                         };
 870
 871                         simgpmisel: simgpmisel@8003c200 {
 872                                 reg = <0x8003c200 0x100>;
 873                                 status = "disabled";
 874                         };
 875
 876                         simsspsel: simsspsel@8003c300 {
 877                                 reg = <0x8003c300 0x100>;
 878                                 status = "disabled";
 879                         };
 880
 881                         simmemsel: simmemsel@8003c400 {
 882                                 reg = <0x8003c400 0x100>;
 883                                 status = "disabled";
 884                         };
 885
 886                         gpiomon: gpiomon@8003c500 {
 887                                 reg = <0x8003c500 0x100>;
 888                                 status = "disabled";
 889                         };
 890
 891                         simenet: simenet@8003c700 {
 892                                 reg = <0x8003c700 0x100>;
 893                                 status = "disabled";
 894                         };
 895
 896                         armjtag: armjtag@8003c800 {
 897                                 reg = <0x8003c800 0x100>;
 898                                 status = "disabled";
 899                         };
 900                 };
 901
 902                 apbx@80040000 {
 903                         compatible = "simple-bus";
 904                         #address-cells = <1>;
 905                         #size-cells = <1>;
 906                         reg = <0x80040000 0x40000>;
 907                         ranges;
 908
 909                         clks: clkctrl@80040000 {
 910                                 compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
 911                                 reg = <0x80040000 0x2000>;
 912                                 #clock-cells = <1>;
 913                         };
 914
 915                         saif0: saif@80042000 {
 916                                 compatible = "fsl,imx28-saif";
 917                                 reg = <0x80042000 0x2000>;
 918                                 interrupts = <59>;
 919                                 #clock-cells = <0>;
 920                                 clocks = <&clks 53>;
 921                                 dmas = <&dma_apbx 4>;
 922                                 dma-names = "rx-tx";
 923                                 status = "disabled";
 924                         };
 925
 926                         power: power@80044000 {
 927                                 reg = <0x80044000 0x2000>;
 928                                 status = "disabled";
 929                         };
 930
 931                         saif1: saif@80046000 {
 932                                 compatible = "fsl,imx28-saif";
 933                                 reg = <0x80046000 0x2000>;
 934                                 interrupts = <58>;
 935                                 clocks = <&clks 54>;
 936                                 dmas = <&dma_apbx 5>;
 937                                 dma-names = "rx-tx";
 938                                 status = "disabled";
 939                         };
 940
 941                         lradc: lradc@80050000 {
 942                                 compatible = "fsl,imx28-lradc";
 943                                 reg = <0x80050000 0x2000>;
 944                                 interrupts = <10 14 15 16 17 18 19
 945                                                 20 21 22 23 24 25>;
 946                                 status = "disabled";
 947                                 clocks = <&clks 41>;
 948                         };
 949
 950                         spdif: spdif@80054000 {
 951                                 reg = <0x80054000 0x2000>;
 952                                 interrupts = <45>;
 953                                 dmas = <&dma_apbx 2>;
 954                                 dma-names = "tx";
 955                                 status = "disabled";
 956                         };
 957
 958                         mxs_rtc: rtc@80056000 {
 959                                 compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
 960                                 reg = <0x80056000 0x2000>;
 961                                 interrupts = <29>;
 962                         };
 963
 964                         i2c0: i2c@80058000 {
 965                                 #address-cells = <1>;
 966                                 #size-cells = <0>;
 967                                 compatible = "fsl,imx28-i2c";
 968                                 reg = <0x80058000 0x2000>;
 969                                 interrupts = <111>;
 970                                 clock-frequency = <100000>;
 971                                 dmas = <&dma_apbx 6>;
 972                                 dma-names = "rx-tx";
 973                                 status = "disabled";
 974                         };
 975
 976                         i2c1: i2c@8005a000 {
 977                                 #address-cells = <1>;
 978                                 #size-cells = <0>;
 979                                 compatible = "fsl,imx28-i2c";
 980                                 reg = <0x8005a000 0x2000>;
 981                                 interrupts = <110>;
 982                                 clock-frequency = <100000>;
 983                                 dmas = <&dma_apbx 7>;
 984                                 dma-names = "rx-tx";
 985                                 status = "disabled";
 986                         };
 987
 988                         pwm: pwm@80064000 {
 989                                 compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
 990                                 reg = <0x80064000 0x2000>;
 991                                 clocks = <&clks 44>;
 992                                 #pwm-cells = <2>;
 993                                 fsl,pwm-number = <8>;
 994                                 status = "disabled";
 995                         };
 996
 997                         timer: timrot@80068000 {
 998                                 compatible = "fsl,imx28-timrot", "fsl,timrot";
 999                                 reg = <0x80068000 0x2000>;
1000                                 interrupts = <48 49 50 51>;
1001                                 clocks = <&clks 26>;
1002                         };
1003
1004                         auart0: serial@8006a000 {
1005                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1006                                 reg = <0x8006a000 0x2000>;
1007                                 interrupts = <112>;
1008                                 dmas = <&dma_apbx 8>, <&dma_apbx 9>;
1009                                 dma-names = "rx", "tx";
1010                                 clocks = <&clks 45>;
1011                                 status = "disabled";
1012                         };
1013
1014                         auart1: serial@8006c000 {
1015                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1016                                 reg = <0x8006c000 0x2000>;
1017                                 interrupts = <113>;
1018                                 dmas = <&dma_apbx 10>, <&dma_apbx 11>;
1019                                 dma-names = "rx", "tx";
1020                                 clocks = <&clks 45>;
1021                                 status = "disabled";
1022                         };
1023
1024                         auart2: serial@8006e000 {
1025                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1026                                 reg = <0x8006e000 0x2000>;
1027                                 interrupts = <114>;
1028                                 dmas = <&dma_apbx 12>, <&dma_apbx 13>;
1029                                 dma-names = "rx", "tx";
1030                                 clocks = <&clks 45>;
1031                                 status = "disabled";
1032                         };
1033
1034                         auart3: serial@80070000 {
1035                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1036                                 reg = <0x80070000 0x2000>;
1037                                 interrupts = <115>;
1038                                 dmas = <&dma_apbx 14>, <&dma_apbx 15>;
1039                                 dma-names = "rx", "tx";
1040                                 clocks = <&clks 45>;
1041                                 status = "disabled";
1042                         };
1043
1044                         auart4: serial@80072000 {
1045                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1046                                 reg = <0x80072000 0x2000>;
1047                                 interrupts = <116>;
1048                                 dmas = <&dma_apbx 0>, <&dma_apbx 1>;
1049                                 dma-names = "rx", "tx";
1050                                 clocks = <&clks 45>;
1051                                 status = "disabled";
1052                         };
1053
1054                         duart: serial@80074000 {
1055                                 compatible = "arm,pl011", "arm,primecell";
1056                                 reg = <0x80074000 0x1000>;
1057                                 interrupts = <47>;
1058                                 clocks = <&clks 45>, <&clks 26>;
1059                                 clock-names = "uart", "apb_pclk";
1060                                 status = "disabled";
1061                         };
1062
1063                         usbphy0: usbphy@8007c000 {
1064                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1065                                 reg = <0x8007c000 0x2000>;
1066                                 clocks = <&clks 62>;
1067                                 status = "disabled";
1068                         };
1069
1070                         usbphy1: usbphy@8007e000 {
1071                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1072                                 reg = <0x8007e000 0x2000>;
1073                                 clocks = <&clks 63>;
1074                                 status = "disabled";
1075                         };
1076                 };
1077         };
1078
1079         ahb@80080000 {
1080                 compatible = "simple-bus";
1081                 #address-cells = <1>;
1082                 #size-cells = <1>;
1083                 reg = <0x80080000 0x80000>;
1084                 ranges;
1085
1086                 usb0: usb@80080000 {
1087                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1088                         reg = <0x80080000 0x10000>;
1089                         interrupts = <93>;
1090                         clocks = <&clks 60>;
1091                         fsl,usbphy = <&usbphy0>;
1092                         status = "disabled";
1093                 };
1094
1095                 usb1: usb@80090000 {
1096                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1097                         reg = <0x80090000 0x10000>;
1098                         interrupts = <92>;
1099                         clocks = <&clks 61>;
1100                         fsl,usbphy = <&usbphy1>;
1101                         status = "disabled";
1102                 };
1103
1104                 dflpt: dflpt@800c0000 {
1105                         reg = <0x800c0000 0x10000>;
1106                         status = "disabled";
1107                 };
1108
1109                 mac0: ethernet@800f0000 {
1110                         compatible = "fsl,imx28-fec";
1111                         reg = <0x800f0000 0x4000>;
1112                         interrupts = <101>;
1113                         clocks = <&clks 57>, <&clks 57>, <&clks 64>;
1114                         clock-names = "ipg", "ahb", "enet_out";
1115                         status = "disabled";
1116                 };
1117
1118                 mac1: ethernet@800f4000 {
1119                         compatible = "fsl,imx28-fec";
1120                         reg = <0x800f4000 0x4000>;
1121                         interrupts = <102>;
1122                         clocks = <&clks 57>, <&clks 57>;
1123                         clock-names = "ipg", "ahb";
1124                         status = "disabled";
1125                 };
1126
1127                 etn_switch: switch@800f8000 {
1128                         reg = <0x800f8000 0x8000>;
1129                         status = "disabled";
1130                 };
1131         };
1132 };