arch/arm/boot/dts/exynos4412-trats2.dts

   1 /*
   2  * Samsung's Exynos4412 based Trats 2 board device tree source
   3  *
   4  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
   5  *              http://www.samsung.com
   6  *
   7  * Device tree source file for Samsung's Trats 2 board which is based on
   8  * Samsung's Exynos4412 SoC.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13 */
  14
  15 /dts-v1/;
  16 #include "exynos4412.dtsi"
  17 #include <dt-bindings/gpio/gpio.h>
  18 #include <dt-bindings/interrupt-controller/irq.h>
  19 #include <dt-bindings/clock/maxim,max77686.h>
  20
  21 / {
  22         model = "Samsung Trats 2 based on Exynos4412";
  23         compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
  24
  25         aliases {
  26                 i2c9 = &i2c_ak8975;
  27                 i2c10 = &i2c_cm36651;
  28                 i2c11 = &i2c_max77693;
  29                 i2c12 = &i2c_max77693_fuel;
  30         };
  31
  32         memory {
  33                 reg =  <0x40000000 0x40000000>;
  34         };
  35
  36         chosen {
  37                 bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
  38                 stdout-path = &serial_2;
  39         };
  40
  41         firmware@0204F000 {
  42                 compatible = "samsung,secure-firmware";
  43                 reg = <0x0204F000 0x1000>;
  44         };
  45
  46         fixed-rate-clocks {
  47                 xxti {
  48                         compatible = "samsung,clock-xxti", "fixed-clock";
  49                         clock-frequency = <0>;
  50                 };
  51
  52                 xusbxti {
  53                         compatible = "samsung,clock-xusbxti", "fixed-clock";
  54                         clock-frequency = <24000000>;
  55                 };
  56         };
  57
  58         regulators {
  59                 compatible = "simple-bus";
  60                 #address-cells = <1>;
  61                 #size-cells = <0>;
  62
  63                 cam_io_reg: voltage-regulator-1 {
  64                         compatible = "regulator-fixed";
  65                         regulator-name = "CAM_SENSOR_A";
  66                         regulator-min-microvolt = <2800000>;
  67                         regulator-max-microvolt = <2800000>;
  68                         gpio = <&gpm0 2 0>;
  69                         enable-active-high;
  70                 };
  71
  72                 lcd_vdd3_reg: voltage-regulator-2 {
  73                         compatible = "regulator-fixed";
  74                         regulator-name = "LCD_VDD_2.2V";
  75                         regulator-min-microvolt = <2200000>;
  76                         regulator-max-microvolt = <2200000>;
  77                         gpio = <&gpc0 1 0>;
  78                         enable-active-high;
  79                 };
  80
  81                 cam_af_reg: voltage-regulator-3 {
  82                         compatible = "regulator-fixed";
  83                         regulator-name = "CAM_AF";
  84                         regulator-min-microvolt = <2800000>;
  85                         regulator-max-microvolt = <2800000>;
  86                         gpio = <&gpm0 4 0>;
  87                         enable-active-high;
  88                 };
  89
  90                 ps_als_reg: voltage-regulator-5 {
  91                         compatible = "regulator-fixed";
  92                         regulator-name = "LED_A_3.0V";
  93                         regulator-min-microvolt = <3000000>;
  94                         regulator-max-microvolt = <3000000>;
  95                         gpio = <&gpj0 5 0>;
  96                         enable-active-high;
  97                 };
  98         };
  99
 100         gpio-keys {
 101                 compatible = "gpio-keys";
 102
 103                 key-down {
 104                         gpios = <&gpx3 3 1>;
 105                         linux,code = <114>;
 106                         label = "volume down";
 107                         debounce-interval = <10>;
 108                 };
 109
 110                 key-up {
 111                         gpios = <&gpx2 2 1>;
 112                         linux,code = <115>;
 113                         label = "volume up";
 114                         debounce-interval = <10>;
 115                 };
 116
 117                 key-power {
 118                         gpios = <&gpx2 7 1>;
 119                         linux,code = <116>;
 120                         label = "power";
 121                         debounce-interval = <10>;
 122                         gpio-key,wakeup;
 123                 };
 124
 125                 key-ok {
 126                         gpios = <&gpx0 1 1>;
 127                         linux,code = <139>;
 128                         label = "ok";
 129                         debounce-inteval = <10>;
 130                         gpio-key,wakeup;
 131                 };
 132         };
 133
 134         i2c_max77693: i2c-gpio-1 {
 135                 compatible = "i2c-gpio";
 136                 gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
 137                 i2c-gpio,delay-us = <2>;
 138                 #address-cells = <1>;
 139                 #size-cells = <0>;
 140                 status = "okay";
 141
 142                 max77693@66 {
 143                         compatible = "maxim,max77693";
 144                         interrupt-parent = <&gpx1>;
 145                         interrupts = <5 2>;
 146                         reg = <0x66>;
 147
 148                         regulators {
 149                                 esafeout1_reg: ESAFEOUT1@1 {
 150                                         regulator-name = "ESAFEOUT1";
 151                                 };
 152                                 esafeout2_reg: ESAFEOUT2@2 {
 153                                         regulator-name = "ESAFEOUT2";
 154                                 };
 155                                 charger_reg: CHARGER@0 {
 156                                         regulator-name = "CHARGER";
 157                                         regulator-min-microamp = <60000>;
 158                                         regulator-max-microamp = <2580000>;
 159                                 };
 160                         };
 161
 162                         max77693_haptic {
 163                                 compatible = "maxim,max77693-haptic";
 164                                 haptic-supply = <&ldo26_reg>;
 165                                 pwms = <&pwm 0 38022 0>;
 166                         };
 167
 168                         charger {
 169                                 compatible = "maxim,max77693-charger";
 170
 171                                 maxim,constant-microvolt = <4350000>;
 172                                 maxim,min-system-microvolt = <3600000>;
 173                                 maxim,thermal-regulation-celsius = <100>;
 174                                 maxim,battery-overcurrent-microamp = <3500000>;
 175                                 maxim,charge-input-threshold-microvolt = <4300000>;
 176                         };
 177                 };
 178         };
 179
 180         i2c_max77693_fuel: i2c-gpio-3 {
 181                 compatible = "i2c-gpio";
 182                 gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
 183                 i2c-gpio,delay-us = <2>;
 184                 #address-cells = <1>;
 185                 #size-cells = <0>;
 186                 status = "okay";
 187
 188                 max77693-fuel-gauge@36 {
 189                         compatible = "maxim,max17047";
 190                         interrupt-parent = <&gpx2>;
 191                         interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 192                         reg = <0x36>;
 193                 };
 194         };
 195
 196         i2c_ak8975: i2c-gpio-0 {
 197                 compatible = "i2c-gpio";
 198                 gpios = <&gpy2 4 0>, <&gpy2 5 0>;
 199                 i2c-gpio,delay-us = <2>;
 200                 #address-cells = <1>;
 201                 #size-cells = <0>;
 202                 status = "okay";
 203
 204                 ak8975@0c {
 205                         compatible = "asahi-kasei,ak8975";
 206                         reg = <0x0c>;
 207                         gpios = <&gpj0 7 0>;
 208                 };
 209         };
 210
 211         i2c_cm36651: i2c-gpio-2 {
 212                 compatible = "i2c-gpio";
 213                 gpios = <&gpf0 0 1>, <&gpf0 1 1>;
 214                 i2c-gpio,delay-us = <2>;
 215                 #address-cells = <1>;
 216                 #size-cells = <0>;
 217
 218                 cm36651@18 {
 219                         compatible = "capella,cm36651";
 220                         reg = <0x18>;
 221                         interrupt-parent = <&gpx0>;
 222                         interrupts = <2 2>;
 223                         vled-supply = <&ps_als_reg>;
 224                 };
 225         };
 226
 227         camera: camera {
 228                 pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
 229                 pinctrl-names = "default";
 230                 status = "okay";
 231                 assigned-clocks = <&clock CLK_MOUT_CAM0>,
 232                                   <&clock CLK_MOUT_CAM1>;
 233                 assigned-clock-parents = <&clock CLK_XUSBXTI>,
 234                                          <&clock CLK_XUSBXTI>;
 235
 236
 237         };
 238
 239         sound {
 240                 compatible = "samsung,trats2-audio";
 241                 samsung,i2s-controller = <&i2s0>;
 242                 samsung,model = "Trats2";
 243                 samsung,audio-codec = <&wm1811>;
 244                 samsung,audio-routing =
 245                         "SPK", "SPKOUTLN",
 246                         "SPK", "SPKOUTLP",
 247                         "SPK", "SPKOUTRN",
 248                         "SPK", "SPKOUTRP";
 249         };
 250
 251         thermistor-ap@0 {
 252                 compatible = "ntc,ncp15wb473";
 253                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 254                 pullup-ohm = <100000>;   /* 100K */
 255                 pulldown-ohm = <100000>; /* 100K */
 256                 io-channels = <&adc 1>;  /* AP temperature */
 257         };
 258
 259         thermistor-battery@1 {
 260                 compatible = "ntc,ncp15wb473";
 261                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 262                 pullup-ohm = <100000>;   /* 100K */
 263                 pulldown-ohm = <100000>; /* 100K */
 264                 io-channels = <&adc 2>;  /* Battery temperature */
 265         };
 266
 267         thermal-zones {
 268                 cpu_thermal: cpu-thermal {
 269                         cooling-maps {
 270                                 map0 {
 271                                      /* Corresponds to 800MHz at freq_table */
 272                                      cooling-device = <&cpu0 7 7>;
 273                                 };
 274                                 map1 {
 275                                      /* Corresponds to 200MHz at freq_table */
 276                                      cooling-device = <&cpu0 13 13>;
 277                                };
 278                        };
 279                 };
 280         };
 281 };
 282
 283 &adc {
 284         vdd-supply = <&ldo3_reg>;
 285         status = "okay";
 286 };
 287
 288 &csis_0 {
 289         status = "okay";
 290         vddcore-supply = <&ldo8_reg>;
 291         vddio-supply = <&ldo10_reg>;
 292         assigned-clocks = <&clock CLK_MOUT_CSIS0>,
 293                         <&clock CLK_SCLK_CSIS0>;
 294         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 295         assigned-clock-rates = <0>, <176000000>;
 296
 297         /* Camera C (3) MIPI CSI-2 (CSIS0) */
 298         port@3 {
 299                 reg = <3>;
 300                 csis0_ep: endpoint {
 301                         remote-endpoint = <&s5c73m3_ep>;
 302                         data-lanes = <1 2 3 4>;
 303                         samsung,csis-hs-settle = <12>;
 304                 };
 305         };
 306 };
 307
 308 &csis_1 {
 309         status = "okay";
 310         vddcore-supply = <&ldo8_reg>;
 311         vddio-supply = <&ldo10_reg>;
 312         assigned-clocks = <&clock CLK_MOUT_CSIS1>,
 313                         <&clock CLK_SCLK_CSIS1>;
 314         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 315         assigned-clock-rates = <0>, <176000000>;
 316
 317         /* Camera D (4) MIPI CSI-2 (CSIS1) */
 318         port@4 {
 319                 reg = <4>;
 320                 csis1_ep: endpoint {
 321                         remote-endpoint = <&is_s5k6a3_ep>;
 322                         data-lanes = <1>;
 323                         samsung,csis-hs-settle = <18>;
 324                         samsung,csis-wclk;
 325                 };
 326         };
 327 };
 328
 329 &dsi_0 {
 330         vddcore-supply = <&ldo8_reg>;
 331         vddio-supply = <&ldo10_reg>;
 332         samsung,pll-clock-frequency = <24000000>;
 333         status = "okay";
 334
 335         ports {
 336                 #address-cells = <1>;
 337                 #size-cells = <0>;
 338
 339                 port@1 {
 340                         reg = <1>;
 341
 342                         dsi_out: endpoint {
 343                                 remote-endpoint = <&dsi_in>;
 344                                 samsung,burst-clock-frequency = <500000000>;
 345                                 samsung,esc-clock-frequency = <20000000>;
 346                         };
 347                 };
 348         };
 349
 350         panel@0 {
 351                 compatible = "samsung,s6e8aa0";
 352                 reg = <0>;
 353                 vdd3-supply = <&lcd_vdd3_reg>;
 354                 vci-supply = <&ldo25_reg>;
 355                 reset-gpios = <&gpy4 5 0>;
 356                 power-on-delay= <50>;
 357                 reset-delay = <100>;
 358                 init-delay = <100>;
 359                 flip-horizontal;
 360                 flip-vertical;
 361                 panel-width-mm = <58>;
 362                 panel-height-mm = <103>;
 363
 364                 display-timings {
 365                         timing-0 {
 366                                 clock-frequency = <57153600>;
 367                                 hactive = <720>;
 368                                 vactive = <1280>;
 369                                 hfront-porch = <5>;
 370                                 hback-porch = <5>;
 371                                 hsync-len = <5>;
 372                                 vfront-porch = <13>;
 373                                 vback-porch = <1>;
 374                                 vsync-len = <2>;
 375                         };
 376                 };
 377
 378                 port {
 379                         dsi_in: endpoint {
 380                                 remote-endpoint = <&dsi_out>;
 381                         };
 382                 };
 383         };
 384 };
 385
 386 &exynos_usbphy {
 387         status = "okay";
 388 };
 389
 390 &fimc_0 {
 391         status = "okay";
 392         assigned-clocks = <&clock CLK_MOUT_FIMC0>,
 393                         <&clock CLK_SCLK_FIMC0>;
 394         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 395         assigned-clock-rates = <0>, <176000000>;
 396 };
 397
 398 &fimc_1 {
 399         status = "okay";
 400         assigned-clocks = <&clock CLK_MOUT_FIMC1>,
 401                         <&clock CLK_SCLK_FIMC1>;
 402         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 403         assigned-clock-rates = <0>, <176000000>;
 404 };
 405
 406 &fimc_2 {
 407         status = "okay";
 408         assigned-clocks = <&clock CLK_MOUT_FIMC2>,
 409                         <&clock CLK_SCLK_FIMC2>;
 410         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 411         assigned-clock-rates = <0>, <176000000>;
 412 };
 413
 414 &fimc_3 {
 415         status = "okay";
 416         assigned-clocks = <&clock CLK_MOUT_FIMC3>,
 417                         <&clock CLK_SCLK_FIMC3>;
 418         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 419         assigned-clock-rates = <0>, <176000000>;
 420 };
 421
 422 &fimc_is {
 423         pinctrl-0 = <&fimc_is_uart>;
 424         pinctrl-names = "default";
 425         status = "okay";
 426
 427         i2c1_isp: i2c-isp@12140000 {
 428                 pinctrl-0 = <&fimc_is_i2c1>;
 429                 pinctrl-names = "default";
 430
 431                 s5k6a3@10 {
 432                         compatible = "samsung,s5k6a3";
 433                         reg = <0x10>;
 434                         svdda-supply = <&cam_io_reg>;
 435                         svddio-supply = <&ldo19_reg>;
 436                         afvdd-supply = <&ldo19_reg>;
 437                         clock-frequency = <24000000>;
 438                         /* CAM_B_CLKOUT */
 439                         clocks = <&camera 1>;
 440                         clock-names = "extclk";
 441                         samsung,camclk-out = <1>;
 442                         gpios = <&gpm1 6 0>;
 443
 444                         port {
 445                                 is_s5k6a3_ep: endpoint {
 446                                         remote-endpoint = <&csis1_ep>;
 447                                         data-lanes = <1>;
 448                                 };
 449                         };
 450                 };
 451         };
 452 };
 453
 454 &fimc_lite_0 {
 455         status = "okay";
 456 };
 457
 458 &fimc_lite_1 {
 459         status = "okay";
 460 };
 461
 462 &fimd {
 463         status = "okay";
 464 };
 465
 466 &hsotg {
 467         vusb_d-supply = <&ldo15_reg>;
 468         vusb_a-supply = <&ldo12_reg>;
 469         dr_mode = "peripheral";
 470         status = "okay";
 471 };
 472
 473 &i2c_0 {
 474         samsung,i2c-sda-delay = <100>;
 475         samsung,i2c-slave-addr = <0x10>;
 476         samsung,i2c-max-bus-freq = <400000>;
 477         pinctrl-0 = <&i2c0_bus>;
 478         pinctrl-names = "default";
 479         status = "okay";
 480
 481         s5c73m3@3c {
 482                 compatible = "samsung,s5c73m3";
 483                 reg = <0x3c>;
 484                 standby-gpios = <&gpm0 1 1>;   /* ISP_STANDBY */
 485                 xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
 486                 vdd-int-supply = <&buck9_reg>;
 487                 vddio-cis-supply = <&ldo9_reg>;
 488                 vdda-supply = <&ldo17_reg>;
 489                 vddio-host-supply = <&ldo18_reg>;
 490                 vdd-af-supply = <&cam_af_reg>;
 491                 vdd-reg-supply = <&cam_io_reg>;
 492                 clock-frequency = <24000000>;
 493                 /* CAM_A_CLKOUT */
 494                 clocks = <&camera 0>;
 495                 clock-names = "cis_extclk";
 496                 port {
 497                         s5c73m3_ep: endpoint {
 498                                 remote-endpoint = <&csis0_ep>;
 499                                 data-lanes = <1 2 3 4>;
 500                         };
 501                 };
 502         };
 503 };
 504
 505 &i2c_3 {
 506         samsung,i2c-sda-delay = <100>;
 507         samsung,i2c-slave-addr = <0x10>;
 508         samsung,i2c-max-bus-freq = <400000>;
 509         pinctrl-0 = <&i2c3_bus>;
 510         pinctrl-names = "default";
 511         status = "okay";
 512
 513         mms114-touchscreen@48 {
 514                 compatible = "melfas,mms114";
 515                 reg = <0x48>;
 516                 interrupt-parent = <&gpm2>;
 517                 interrupts = <3 2>;
 518                 x-size = <720>;
 519                 y-size = <1280>;
 520                 avdd-supply = <&ldo23_reg>;
 521                 vdd-supply = <&ldo24_reg>;
 522         };
 523 };
 524
 525 &i2c_4 {
 526         samsung,i2c-sda-delay = <100>;
 527         samsung,i2c-slave-addr = <0x10>;
 528         samsung,i2c-max-bus-freq = <100000>;
 529         pinctrl-0 = <&i2c4_bus>;
 530         pinctrl-names = "default";
 531         status = "okay";
 532
 533         wm1811: wm1811@1a {
 534                 compatible = "wlf,wm1811";
 535                 reg = <0x1a>;
 536                 clocks = <&pmu_system_controller 0>;
 537                 clock-names = "MCLK1";
 538                 DCVDD-supply = <&ldo3_reg>;
 539                 DBVDD1-supply = <&ldo3_reg>;
 540                 wlf,ldo1ena = <&gpj0 4 0>;
 541         };
 542 };
 543
 544 &i2c_7 {
 545         samsung,i2c-sda-delay = <100>;
 546         samsung,i2c-slave-addr = <0x10>;
 547         samsung,i2c-max-bus-freq = <100000>;
 548         pinctrl-0 = <&i2c7_bus>;
 549         pinctrl-names = "default";
 550         status = "okay";
 551
 552         max77686: max77686_pmic@09 {
 553                 compatible = "maxim,max77686";
 554                 interrupt-parent = <&gpx0>;
 555                 interrupts = <7 0>;
 556                 reg = <0x09>;
 557                 #clock-cells = <1>;
 558
 559                 voltage-regulators {
 560                         ldo1_reg: ldo1 {
 561                                 regulator-compatible = "LDO1";
 562                                 regulator-name = "VALIVE_1.0V_AP";
 563                                 regulator-min-microvolt = <1000000>;
 564                                 regulator-max-microvolt = <1000000>;
 565                                 regulator-always-on;
 566                         };
 567
 568                         ldo2_reg: ldo2 {
 569                                 regulator-compatible = "LDO2";
 570                                 regulator-name = "VM1M2_1.2V_AP";
 571                                 regulator-min-microvolt = <1200000>;
 572                                 regulator-max-microvolt = <1200000>;
 573                                 regulator-always-on;
 574                                 regulator-state-mem {
 575                                         regulator-on-in-suspend;
 576                                 };
 577                         };
 578
 579                         ldo3_reg: ldo3 {
 580                                 regulator-compatible = "LDO3";
 581                                 regulator-name = "VCC_1.8V_AP";
 582                                 regulator-min-microvolt = <1800000>;
 583                                 regulator-max-microvolt = <1800000>;
 584                                 regulator-always-on;
 585                         };
 586
 587                         ldo4_reg: ldo4 {
 588                                 regulator-compatible = "LDO4";
 589                                 regulator-name = "VCC_2.8V_AP";
 590                                 regulator-min-microvolt = <2800000>;
 591                                 regulator-max-microvolt = <2800000>;
 592                                 regulator-always-on;
 593                         };
 594
 595                         ldo5_reg: ldo5 {
 596                                 regulator-compatible = "LDO5";
 597                                 regulator-name = "VCC_1.8V_IO";
 598                                 regulator-min-microvolt = <1800000>;
 599                                 regulator-max-microvolt = <1800000>;
 600                                 regulator-always-on;
 601                         };
 602
 603                         ldo6_reg: ldo6 {
 604                                 regulator-compatible = "LDO6";
 605                                 regulator-name = "VMPLL_1.0V_AP";
 606                                 regulator-min-microvolt = <1000000>;
 607                                 regulator-max-microvolt = <1000000>;
 608                                 regulator-always-on;
 609                                 regulator-state-mem {
 610                                         regulator-on-in-suspend;
 611                                 };
 612                         };
 613
 614                         ldo7_reg: ldo7 {
 615                                 regulator-compatible = "LDO7";
 616                                 regulator-name = "VPLL_1.0V_AP";
 617                                 regulator-min-microvolt = <1000000>;
 618                                 regulator-max-microvolt = <1000000>;
 619                                 regulator-always-on;
 620                                 regulator-state-mem {
 621                                         regulator-on-in-suspend;
 622                                 };
 623                         };
 624
 625                         ldo8_reg: ldo8 {
 626                                 regulator-compatible = "LDO8";
 627                                 regulator-name = "VMIPI_1.0V";
 628                                 regulator-min-microvolt = <1000000>;
 629                                 regulator-max-microvolt = <1000000>;
 630                                 regulator-state-mem {
 631                                         regulator-off-in-suspend;
 632                                 };
 633                         };
 634
 635                         ldo9_reg: ldo9 {
 636                                 regulator-compatible = "LDO9";
 637                                 regulator-name = "CAM_ISP_MIPI_1.2V";
 638                                 regulator-min-microvolt = <1200000>;
 639                                 regulator-max-microvolt = <1200000>;
 640                         };
 641
 642                         ldo10_reg: ldo10 {
 643                                 regulator-compatible = "LDO10";
 644                                 regulator-name = "VMIPI_1.8V";
 645                                 regulator-min-microvolt = <1800000>;
 646                                 regulator-max-microvolt = <1800000>;
 647                                 regulator-state-mem {
 648                                         regulator-off-in-suspend;
 649                                 };
 650                         };
 651
 652                         ldo11_reg: ldo11 {
 653                                 regulator-compatible = "LDO11";
 654                                 regulator-name = "VABB1_1.95V";
 655                                 regulator-min-microvolt = <1950000>;
 656                                 regulator-max-microvolt = <1950000>;
 657                                 regulator-always-on;
 658                                 regulator-state-mem {
 659                                         regulator-off-in-suspend;
 660                                 };
 661                         };
 662
 663                         ldo12_reg: ldo12 {
 664                                 regulator-compatible = "LDO12";
 665                                 regulator-name = "VUOTG_3.0V";
 666                                 regulator-min-microvolt = <3000000>;
 667                                 regulator-max-microvolt = <3000000>;
 668                                 regulator-state-mem {
 669                                         regulator-off-in-suspend;
 670                                 };
 671                         };
 672
 673                         ldo13_reg: ldo13 {
 674                                 regulator-compatible = "LDO13";
 675                                 regulator-name = "NFC_AVDD_1.8V";
 676                                 regulator-min-microvolt = <1800000>;
 677                                 regulator-max-microvolt = <1800000>;
 678                         };
 679
 680                         ldo14_reg: ldo14 {
 681                                 regulator-compatible = "LDO14";
 682                                 regulator-name = "VABB2_1.95V";
 683                                 regulator-min-microvolt = <1950000>;
 684                                 regulator-max-microvolt = <1950000>;
 685                                 regulator-always-on;
 686                                 regulator-state-mem {
 687                                         regulator-off-in-suspend;
 688                                 };
 689                         };
 690
 691                         ldo15_reg: ldo15 {
 692                                 regulator-compatible = "LDO15";
 693                                 regulator-name = "VHSIC_1.0V";
 694                                 regulator-min-microvolt = <1000000>;
 695                                 regulator-max-microvolt = <1000000>;
 696                                 regulator-state-mem {
 697                                         regulator-on-in-suspend;
 698                                 };
 699                         };
 700
 701                         ldo16_reg: ldo16 {
 702                                 regulator-compatible = "LDO16";
 703                                 regulator-name = "VHSIC_1.8V";
 704                                 regulator-min-microvolt = <1800000>;
 705                                 regulator-max-microvolt = <1800000>;
 706                                 regulator-state-mem {
 707                                         regulator-on-in-suspend;
 708                                 };
 709                         };
 710
 711                         ldo17_reg: ldo17 {
 712                                 regulator-compatible = "LDO17";
 713                                 regulator-name = "CAM_SENSOR_CORE_1.2V";
 714                                 regulator-min-microvolt = <1200000>;
 715                                 regulator-max-microvolt = <1200000>;
 716                         };
 717
 718                         ldo18_reg: ldo18 {
 719                                 regulator-compatible = "LDO18";
 720                                 regulator-name = "CAM_ISP_SEN_IO_1.8V";
 721                                 regulator-min-microvolt = <1800000>;
 722                                 regulator-max-microvolt = <1800000>;
 723                         };
 724
 725                         ldo19_reg: ldo19 {
 726                                 regulator-compatible = "LDO19";
 727                                 regulator-name = "VT_CAM_1.8V";
 728                                 regulator-min-microvolt = <1800000>;
 729                                 regulator-max-microvolt = <1800000>;
 730                         };
 731
 732                         ldo20_reg: ldo20 {
 733                                 regulator-compatible = "LDO20";
 734                                 regulator-name = "VDDQ_PRE_1.8V";
 735                                 regulator-min-microvolt = <1800000>;
 736                                 regulator-max-microvolt = <1800000>;
 737                         };
 738
 739                         ldo21_reg: ldo21 {
 740                                 regulator-compatible = "LDO21";
 741                                 regulator-name = "VTF_2.8V";
 742                                 regulator-min-microvolt = <2800000>;
 743                                 regulator-max-microvolt = <2800000>;
 744                                 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
 745                         };
 746
 747                         ldo22_reg: ldo22 {
 748                                 regulator-compatible = "LDO22";
 749                                 regulator-name = "VMEM_VDD_2.8V";
 750                                 regulator-min-microvolt = <2800000>;
 751                                 regulator-max-microvolt = <2800000>;
 752                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 753                         };
 754
 755                         ldo23_reg: ldo23 {
 756                                 regulator-compatible = "LDO23";
 757                                 regulator-name = "TSP_AVDD_3.3V";
 758                                 regulator-min-microvolt = <3300000>;
 759                                 regulator-max-microvolt = <3300000>;
 760                         };
 761
 762                         ldo24_reg: ldo24 {
 763                                 regulator-compatible = "LDO24";
 764                                 regulator-name = "TSP_VDD_1.8V";
 765                                 regulator-min-microvolt = <1800000>;
 766                                 regulator-max-microvolt = <1800000>;
 767                         };
 768
 769                         ldo25_reg: ldo25 {
 770                                 regulator-compatible = "LDO25";
 771                                 regulator-name = "LCD_VCC_3.3V";
 772                                 regulator-min-microvolt = <2800000>;
 773                                 regulator-max-microvolt = <2800000>;
 774                         };
 775
 776                         ldo26_reg: ldo26 {
 777                                 regulator-compatible = "LDO26";
 778                                 regulator-name = "MOTOR_VCC_3.0V";
 779                                 regulator-min-microvolt = <3000000>;
 780                                 regulator-max-microvolt = <3000000>;
 781                         };
 782
 783                         buck1_reg: buck1 {
 784                                 regulator-compatible = "BUCK1";
 785                                 regulator-name = "vdd_mif";
 786                                 regulator-min-microvolt = <850000>;
 787                                 regulator-max-microvolt = <1100000>;
 788                                 regulator-always-on;
 789                                 regulator-boot-on;
 790                                 regulator-state-mem {
 791                                         regulator-off-in-suspend;
 792                                 };
 793                         };
 794
 795                         buck2_reg: buck2 {
 796                                 regulator-compatible = "BUCK2";
 797                                 regulator-name = "vdd_arm";
 798                                 regulator-min-microvolt = <850000>;
 799                                 regulator-max-microvolt = <1500000>;
 800                                 regulator-always-on;
 801                                 regulator-boot-on;
 802                                 regulator-state-mem {
 803                                         regulator-on-in-suspend;
 804                                 };
 805                         };
 806
 807                         buck3_reg: buck3 {
 808                                 regulator-compatible = "BUCK3";
 809                                 regulator-name = "vdd_int";
 810                                 regulator-min-microvolt = <850000>;
 811                                 regulator-max-microvolt = <1150000>;
 812                                 regulator-always-on;
 813                                 regulator-boot-on;
 814                                 regulator-state-mem {
 815                                         regulator-off-in-suspend;
 816                                 };
 817                         };
 818
 819                         buck4_reg: buck4 {
 820                                 regulator-compatible = "BUCK4";
 821                                 regulator-name = "vdd_g3d";
 822                                 regulator-min-microvolt = <850000>;
 823                                 regulator-max-microvolt = <1150000>;
 824                                 regulator-boot-on;
 825                                 regulator-state-mem {
 826                                         regulator-off-in-suspend;
 827                                 };
 828                         };
 829
 830                         buck5_reg: buck5 {
 831                                 regulator-compatible = "BUCK5";
 832                                 regulator-name = "VMEM_1.2V_AP";
 833                                 regulator-min-microvolt = <1200000>;
 834                                 regulator-max-microvolt = <1200000>;
 835                                 regulator-always-on;
 836                         };
 837
 838                         buck6_reg: buck6 {
 839                                 regulator-compatible = "BUCK6";
 840                                 regulator-name = "VCC_SUB_1.35V";
 841                                 regulator-min-microvolt = <1350000>;
 842                                 regulator-max-microvolt = <1350000>;
 843                                 regulator-always-on;
 844                         };
 845
 846                         buck7_reg: buck7 {
 847                                 regulator-compatible = "BUCK7";
 848                                 regulator-name = "VCC_SUB_2.0V";
 849                                 regulator-min-microvolt = <2000000>;
 850                                 regulator-max-microvolt = <2000000>;
 851                                 regulator-always-on;
 852                         };
 853
 854                         buck8_reg: buck8 {
 855                                 regulator-compatible = "BUCK8";
 856                                 regulator-name = "VMEM_VDDF_3.0V";
 857                                 regulator-min-microvolt = <2850000>;
 858                                 regulator-max-microvolt = <2850000>;
 859                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 860                         };
 861
 862                         buck9_reg: buck9 {
 863                                 regulator-compatible = "BUCK9";
 864                                 regulator-name = "CAM_ISP_CORE_1.2V";
 865                                 regulator-min-microvolt = <1000000>;
 866                                 regulator-max-microvolt = <1200000>;
 867                                 maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
 868                         };
 869                 };
 870         };
 871 };
 872
 873 &i2s0 {
 874         pinctrl-0 = <&i2s0_bus>;
 875         pinctrl-names = "default";
 876         status = "okay";
 877 };
 878
 879 &mshc_0 {
 880         num-slots = <1>;
 881         broken-cd;
 882         non-removable;
 883         card-detect-delay = <200>;
 884         vmmc-supply = <&ldo22_reg>;
 885         clock-frequency = <400000000>;
 886         samsung,dw-mshc-ciu-div = <0>;
 887         samsung,dw-mshc-sdr-timing = <2 3>;
 888         samsung,dw-mshc-ddr-timing = <1 2>;
 889         pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 890         pinctrl-names = "default";
 891         status = "okay";
 892         bus-width = <8>;
 893         cap-mmc-highspeed;
 894 };
 895
 896 &pmu_system_controller {
 897         assigned-clocks = <&pmu_system_controller 0>;
 898         assigned-clock-parents =  <&clock CLK_XUSBXTI>;
 899 };
 900
 901 &ppmu_dmc0 {
 902         status = "okay";
 903
 904         events {
 905                 ppmu_dmc0_3: ppmu-event3-dmc0 {
 906                         event-name = "ppmu-event3-dmc0";
 907                 };
 908         };
 909 };
 910
 911 &ppmu_dmc1 {
 912         status = "okay";
 913
 914         events {
 915                 ppmu_dmc1_3: ppmu-event3-dmc1 {
 916                         event-name = "ppmu-event3-dmc1";
 917                 };
 918         };
 919 };
 920
 921 &ppmu_leftbus {
 922         status = "okay";
 923
 924         events {
 925                 ppmu_leftbus_3: ppmu-event3-leftbus {
 926                         event-name = "ppmu-event3-leftbus";
 927                 };
 928         };
 929 };
 930
 931 &ppmu_rightbus {
 932         status = "okay";
 933
 934         events {
 935                 ppmu_rightbus_3: ppmu-event3-rightbus {
 936                         event-name = "ppmu-event3-rightbus";
 937                 };
 938         };
 939 };
 940
 941 &pinctrl_0 {
 942         pinctrl-names = "default";
 943         pinctrl-0 = <&sleep0>;
 944
 945         sleep0: sleep-states {
 946                 PIN_SLP(gpa0-0, INPUT, NONE);
 947                 PIN_SLP(gpa0-1, OUT0, NONE);
 948                 PIN_SLP(gpa0-2, INPUT, NONE);
 949                 PIN_SLP(gpa0-3, INPUT, UP);
 950                 PIN_SLP(gpa0-4, INPUT, NONE);
 951                 PIN_SLP(gpa0-5, INPUT, DOWN);
 952                 PIN_SLP(gpa0-6, INPUT, DOWN);
 953                 PIN_SLP(gpa0-7, INPUT, UP);
 954
 955                 PIN_SLP(gpa1-0, INPUT, DOWN);
 956                 PIN_SLP(gpa1-1, INPUT, DOWN);
 957                 PIN_SLP(gpa1-2, INPUT, DOWN);
 958                 PIN_SLP(gpa1-3, INPUT, DOWN);
 959                 PIN_SLP(gpa1-4, INPUT, DOWN);
 960                 PIN_SLP(gpa1-5, INPUT, DOWN);
 961
 962                 PIN_SLP(gpb-0, INPUT, NONE);
 963                 PIN_SLP(gpb-1, INPUT, NONE);
 964                 PIN_SLP(gpb-2, INPUT, NONE);
 965                 PIN_SLP(gpb-3, INPUT, NONE);
 966                 PIN_SLP(gpb-4, INPUT, DOWN);
 967                 PIN_SLP(gpb-5, INPUT, UP);
 968                 PIN_SLP(gpb-6, INPUT, DOWN);
 969                 PIN_SLP(gpb-7, INPUT, DOWN);
 970
 971                 PIN_SLP(gpc0-0, INPUT, DOWN);
 972                 PIN_SLP(gpc0-1, INPUT, DOWN);
 973                 PIN_SLP(gpc0-2, INPUT, DOWN);
 974                 PIN_SLP(gpc0-3, INPUT, DOWN);
 975                 PIN_SLP(gpc0-4, INPUT, DOWN);
 976
 977                 PIN_SLP(gpc1-0, INPUT, NONE);
 978                 PIN_SLP(gpc1-1, PREV, NONE);
 979                 PIN_SLP(gpc1-2, INPUT, NONE);
 980                 PIN_SLP(gpc1-3, INPUT, NONE);
 981                 PIN_SLP(gpc1-4, INPUT, NONE);
 982
 983                 PIN_SLP(gpd0-0, INPUT, DOWN);
 984                 PIN_SLP(gpd0-1, INPUT, DOWN);
 985                 PIN_SLP(gpd0-2, INPUT, NONE);
 986                 PIN_SLP(gpd0-3, INPUT, NONE);
 987
 988                 PIN_SLP(gpd1-0, INPUT, DOWN);
 989                 PIN_SLP(gpd1-1, INPUT, DOWN);
 990                 PIN_SLP(gpd1-2, INPUT, NONE);
 991                 PIN_SLP(gpd1-3, INPUT, NONE);
 992
 993                 PIN_SLP(gpf0-0, INPUT, NONE);
 994                 PIN_SLP(gpf0-1, INPUT, NONE);
 995                 PIN_SLP(gpf0-2, INPUT, DOWN);
 996                 PIN_SLP(gpf0-3, INPUT, DOWN);
 997                 PIN_SLP(gpf0-4, INPUT, NONE);
 998                 PIN_SLP(gpf0-5, INPUT, DOWN);
 999                 PIN_SLP(gpf0-6, INPUT, NONE);
1000                 PIN_SLP(gpf0-7, INPUT, DOWN);
1001
1002                 PIN_SLP(gpf1-0, INPUT, DOWN);
1003                 PIN_SLP(gpf1-1, INPUT, DOWN);
1004                 PIN_SLP(gpf1-2, INPUT, DOWN);
1005                 PIN_SLP(gpf1-3, INPUT, DOWN);
1006                 PIN_SLP(gpf1-4, INPUT, NONE);
1007                 PIN_SLP(gpf1-5, INPUT, NONE);
1008                 PIN_SLP(gpf1-6, INPUT, DOWN);
1009                 PIN_SLP(gpf1-7, PREV, NONE);
1010
1011                 PIN_SLP(gpf2-0, PREV, NONE);
1012                 PIN_SLP(gpf2-1, INPUT, DOWN);
1013                 PIN_SLP(gpf2-2, INPUT, DOWN);
1014                 PIN_SLP(gpf2-3, INPUT, DOWN);
1015                 PIN_SLP(gpf2-4, INPUT, DOWN);
1016                 PIN_SLP(gpf2-5, INPUT, DOWN);
1017                 PIN_SLP(gpf2-6, INPUT, NONE);
1018                 PIN_SLP(gpf2-7, INPUT, NONE);
1019
1020                 PIN_SLP(gpf3-0, INPUT, NONE);
1021                 PIN_SLP(gpf3-1, PREV, NONE);
1022                 PIN_SLP(gpf3-2, PREV, NONE);
1023                 PIN_SLP(gpf3-3, PREV, NONE);
1024                 PIN_SLP(gpf3-4, OUT1, NONE);
1025                 PIN_SLP(gpf3-5, INPUT, DOWN);
1026
1027                 PIN_SLP(gpj0-0, PREV, NONE);
1028                 PIN_SLP(gpj0-1, PREV, NONE);
1029                 PIN_SLP(gpj0-2, PREV, NONE);
1030                 PIN_SLP(gpj0-3, INPUT, DOWN);
1031                 PIN_SLP(gpj0-4, PREV, NONE);
1032                 PIN_SLP(gpj0-5, PREV, NONE);
1033                 PIN_SLP(gpj0-6, INPUT, DOWN);
1034                 PIN_SLP(gpj0-7, INPUT, DOWN);
1035
1036                 PIN_SLP(gpj1-0, INPUT, DOWN);
1037                 PIN_SLP(gpj1-1, PREV, NONE);
1038                 PIN_SLP(gpj1-2, PREV, NONE);
1039                 PIN_SLP(gpj1-3, INPUT, DOWN);
1040                 PIN_SLP(gpj1-4, INPUT, DOWN);
1041         };
1042 };
1043
1044 &pinctrl_1 {
1045         pinctrl-names = "default";
1046         pinctrl-0 = <&sleep1>;
1047
1048         sleep1: sleep-states {
1049                 PIN_SLP(gpk0-0, PREV, NONE);
1050                 PIN_SLP(gpk0-1, PREV, NONE);
1051                 PIN_SLP(gpk0-2, OUT0, NONE);
1052                 PIN_SLP(gpk0-3, PREV, NONE);
1053                 PIN_SLP(gpk0-4, PREV, NONE);
1054                 PIN_SLP(gpk0-5, PREV, NONE);
1055                 PIN_SLP(gpk0-6, PREV, NONE);
1056
1057                 PIN_SLP(gpk1-0, INPUT, DOWN);
1058                 PIN_SLP(gpk1-1, INPUT, DOWN);
1059                 PIN_SLP(gpk1-2, INPUT, DOWN);
1060                 PIN_SLP(gpk1-3, PREV, NONE);
1061                 PIN_SLP(gpk1-4, PREV, NONE);
1062                 PIN_SLP(gpk1-5, PREV, NONE);
1063                 PIN_SLP(gpk1-6, PREV, NONE);
1064
1065                 PIN_SLP(gpk2-0, INPUT, DOWN);
1066                 PIN_SLP(gpk2-1, INPUT, DOWN);
1067                 PIN_SLP(gpk2-2, INPUT, DOWN);
1068                 PIN_SLP(gpk2-3, INPUT, DOWN);
1069                 PIN_SLP(gpk2-4, INPUT, DOWN);
1070                 PIN_SLP(gpk2-5, INPUT, DOWN);
1071                 PIN_SLP(gpk2-6, INPUT, DOWN);
1072
1073                 PIN_SLP(gpk3-0, OUT0, NONE);
1074                 PIN_SLP(gpk3-1, INPUT, NONE);
1075                 PIN_SLP(gpk3-2, INPUT, DOWN);
1076                 PIN_SLP(gpk3-3, INPUT, NONE);
1077                 PIN_SLP(gpk3-4, INPUT, NONE);
1078                 PIN_SLP(gpk3-5, INPUT, NONE);
1079                 PIN_SLP(gpk3-6, INPUT, NONE);
1080
1081                 PIN_SLP(gpl0-0, INPUT, DOWN);
1082                 PIN_SLP(gpl0-1, INPUT, DOWN);
1083                 PIN_SLP(gpl0-2, INPUT, DOWN);
1084                 PIN_SLP(gpl0-3, INPUT, DOWN);
1085                 PIN_SLP(gpl0-4, PREV, NONE);
1086                 PIN_SLP(gpl0-6, PREV, NONE);
1087
1088                 PIN_SLP(gpl1-0, INPUT, DOWN);
1089                 PIN_SLP(gpl1-1, INPUT, DOWN);
1090                 PIN_SLP(gpl2-0, INPUT, DOWN);
1091                 PIN_SLP(gpl2-1, INPUT, DOWN);
1092                 PIN_SLP(gpl2-2, INPUT, DOWN);
1093                 PIN_SLP(gpl2-3, INPUT, DOWN);
1094                 PIN_SLP(gpl2-4, INPUT, DOWN);
1095                 PIN_SLP(gpl2-5, INPUT, DOWN);
1096                 PIN_SLP(gpl2-6, PREV, NONE);
1097                 PIN_SLP(gpl2-7, INPUT, DOWN);
1098
1099                 PIN_SLP(gpm0-0, INPUT, DOWN);
1100                 PIN_SLP(gpm0-1, INPUT, DOWN);
1101                 PIN_SLP(gpm0-2, INPUT, DOWN);
1102                 PIN_SLP(gpm0-3, INPUT, DOWN);
1103                 PIN_SLP(gpm0-4, INPUT, DOWN);
1104                 PIN_SLP(gpm0-5, INPUT, DOWN);
1105                 PIN_SLP(gpm0-6, INPUT, DOWN);
1106                 PIN_SLP(gpm0-7, INPUT, DOWN);
1107
1108                 PIN_SLP(gpm1-0, INPUT, DOWN);
1109                 PIN_SLP(gpm1-1, INPUT, DOWN);
1110                 PIN_SLP(gpm1-2, INPUT, NONE);
1111                 PIN_SLP(gpm1-3, INPUT, NONE);
1112                 PIN_SLP(gpm1-4, INPUT, NONE);
1113                 PIN_SLP(gpm1-5, INPUT, NONE);
1114                 PIN_SLP(gpm1-6, INPUT, DOWN);
1115
1116                 PIN_SLP(gpm2-0, INPUT, NONE);
1117                 PIN_SLP(gpm2-1, INPUT, NONE);
1118                 PIN_SLP(gpm2-2, INPUT, DOWN);
1119                 PIN_SLP(gpm2-3, INPUT, DOWN);
1120                 PIN_SLP(gpm2-4, INPUT, DOWN);
1121
1122                 PIN_SLP(gpm3-0, PREV, NONE);
1123                 PIN_SLP(gpm3-1, PREV, NONE);
1124                 PIN_SLP(gpm3-2, PREV, NONE);
1125                 PIN_SLP(gpm3-3, OUT1, NONE);
1126                 PIN_SLP(gpm3-4, INPUT, DOWN);
1127                 PIN_SLP(gpm3-5, INPUT, DOWN);
1128                 PIN_SLP(gpm3-6, INPUT, DOWN);
1129                 PIN_SLP(gpm3-7, INPUT, DOWN);
1130
1131                 PIN_SLP(gpm4-0, INPUT, DOWN);
1132                 PIN_SLP(gpm4-1, INPUT, DOWN);
1133                 PIN_SLP(gpm4-2, INPUT, DOWN);
1134                 PIN_SLP(gpm4-3, INPUT, DOWN);
1135                 PIN_SLP(gpm4-4, INPUT, DOWN);
1136                 PIN_SLP(gpm4-5, INPUT, DOWN);
1137                 PIN_SLP(gpm4-6, INPUT, DOWN);
1138                 PIN_SLP(gpm4-7, INPUT, DOWN);
1139
1140                 PIN_SLP(gpy0-0, INPUT, DOWN);
1141                 PIN_SLP(gpy0-1, INPUT, DOWN);
1142                 PIN_SLP(gpy0-2, INPUT, DOWN);
1143                 PIN_SLP(gpy0-3, INPUT, DOWN);
1144                 PIN_SLP(gpy0-4, INPUT, DOWN);
1145                 PIN_SLP(gpy0-5, INPUT, DOWN);
1146
1147                 PIN_SLP(gpy1-0, INPUT, DOWN);
1148                 PIN_SLP(gpy1-1, INPUT, DOWN);
1149                 PIN_SLP(gpy1-2, INPUT, DOWN);
1150                 PIN_SLP(gpy1-3, INPUT, DOWN);
1151
1152                 PIN_SLP(gpy2-0, PREV, NONE);
1153                 PIN_SLP(gpy2-1, INPUT, DOWN);
1154                 PIN_SLP(gpy2-2, INPUT, NONE);
1155                 PIN_SLP(gpy2-3, INPUT, NONE);
1156                 PIN_SLP(gpy2-4, INPUT, NONE);
1157                 PIN_SLP(gpy2-5, INPUT, NONE);
1158
1159                 PIN_SLP(gpy3-0, INPUT, DOWN);
1160                 PIN_SLP(gpy3-1, INPUT, DOWN);
1161                 PIN_SLP(gpy3-2, INPUT, DOWN);
1162                 PIN_SLP(gpy3-3, INPUT, DOWN);
1163                 PIN_SLP(gpy3-4, INPUT, DOWN);
1164                 PIN_SLP(gpy3-5, INPUT, DOWN);
1165                 PIN_SLP(gpy3-6, INPUT, DOWN);
1166                 PIN_SLP(gpy3-7, INPUT, DOWN);
1167
1168                 PIN_SLP(gpy4-0, INPUT, DOWN);
1169                 PIN_SLP(gpy4-1, INPUT, DOWN);
1170                 PIN_SLP(gpy4-2, INPUT, DOWN);
1171                 PIN_SLP(gpy4-3, INPUT, DOWN);
1172                 PIN_SLP(gpy4-4, INPUT, DOWN);
1173                 PIN_SLP(gpy4-5, INPUT, DOWN);
1174                 PIN_SLP(gpy4-6, INPUT, DOWN);
1175                 PIN_SLP(gpy4-7, INPUT, DOWN);
1176
1177                 PIN_SLP(gpy5-0, INPUT, DOWN);
1178                 PIN_SLP(gpy5-1, INPUT, DOWN);
1179                 PIN_SLP(gpy5-2, INPUT, DOWN);
1180                 PIN_SLP(gpy5-3, INPUT, DOWN);
1181                 PIN_SLP(gpy5-4, INPUT, DOWN);
1182                 PIN_SLP(gpy5-5, INPUT, DOWN);
1183                 PIN_SLP(gpy5-6, INPUT, DOWN);
1184                 PIN_SLP(gpy5-7, INPUT, DOWN);
1185
1186                 PIN_SLP(gpy6-0, INPUT, DOWN);
1187                 PIN_SLP(gpy6-1, INPUT, DOWN);
1188                 PIN_SLP(gpy6-2, INPUT, DOWN);
1189                 PIN_SLP(gpy6-3, INPUT, DOWN);
1190                 PIN_SLP(gpy6-4, INPUT, DOWN);
1191                 PIN_SLP(gpy6-5, INPUT, DOWN);
1192                 PIN_SLP(gpy6-6, INPUT, DOWN);
1193                 PIN_SLP(gpy6-7, INPUT, DOWN);
1194         };
1195 };
1196
1197 &pinctrl_2 {
1198         pinctrl-names = "default";
1199         pinctrl-0 = <&sleep2>;
1200
1201         sleep2: sleep-states {
1202                 PIN_SLP(gpz-0, INPUT, DOWN);
1203                 PIN_SLP(gpz-1, INPUT, DOWN);
1204                 PIN_SLP(gpz-2, INPUT, DOWN);
1205                 PIN_SLP(gpz-3, INPUT, DOWN);
1206                 PIN_SLP(gpz-4, INPUT, DOWN);
1207                 PIN_SLP(gpz-5, INPUT, DOWN);
1208                 PIN_SLP(gpz-6, INPUT, DOWN);
1209         };
1210 };
1211
1212 &pinctrl_3 {
1213         pinctrl-names = "default";
1214         pinctrl-0 = <&sleep3>;
1215
1216         sleep3: sleep-states {
1217                 PIN_SLP(gpv0-0, INPUT, DOWN);
1218                 PIN_SLP(gpv0-1, INPUT, DOWN);
1219                 PIN_SLP(gpv0-2, INPUT, DOWN);
1220                 PIN_SLP(gpv0-3, INPUT, DOWN);
1221                 PIN_SLP(gpv0-4, INPUT, DOWN);
1222                 PIN_SLP(gpv0-5, INPUT, DOWN);
1223                 PIN_SLP(gpv0-6, INPUT, DOWN);
1224                 PIN_SLP(gpv0-7, INPUT, DOWN);
1225
1226                 PIN_SLP(gpv1-0, INPUT, DOWN);
1227                 PIN_SLP(gpv1-1, INPUT, DOWN);
1228                 PIN_SLP(gpv1-2, INPUT, DOWN);
1229                 PIN_SLP(gpv1-3, INPUT, DOWN);
1230                 PIN_SLP(gpv1-4, INPUT, DOWN);
1231                 PIN_SLP(gpv1-5, INPUT, DOWN);
1232                 PIN_SLP(gpv1-6, INPUT, DOWN);
1233                 PIN_SLP(gpv1-7, INPUT, DOWN);
1234
1235                 PIN_SLP(gpv2-0, INPUT, DOWN);
1236                 PIN_SLP(gpv2-1, INPUT, DOWN);
1237                 PIN_SLP(gpv2-2, INPUT, DOWN);
1238                 PIN_SLP(gpv2-3, INPUT, DOWN);
1239                 PIN_SLP(gpv2-4, INPUT, DOWN);
1240                 PIN_SLP(gpv2-5, INPUT, DOWN);
1241                 PIN_SLP(gpv2-6, INPUT, DOWN);
1242                 PIN_SLP(gpv2-7, INPUT, DOWN);
1243
1244                 PIN_SLP(gpv3-0, INPUT, DOWN);
1245                 PIN_SLP(gpv3-1, INPUT, DOWN);
1246                 PIN_SLP(gpv3-2, INPUT, DOWN);
1247                 PIN_SLP(gpv3-3, INPUT, DOWN);
1248                 PIN_SLP(gpv3-4, INPUT, DOWN);
1249                 PIN_SLP(gpv3-5, INPUT, DOWN);
1250                 PIN_SLP(gpv3-6, INPUT, DOWN);
1251                 PIN_SLP(gpv3-7, INPUT, DOWN);
1252
1253                 PIN_SLP(gpv4-0, INPUT, DOWN);
1254         };
1255 };
1256
1257 &pwm {
1258         pinctrl-0 = <&pwm0_out>;
1259         pinctrl-names = "default";
1260         samsung,pwm-outputs = <0>;
1261         status = "okay";
1262 };
1263
1264 &rtc {
1265         status = "okay";
1266         clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
1267         clock-names = "rtc", "rtc_src";
1268 };
1269
1270 &sdhci_2 {
1271         bus-width = <4>;
1272         cd-gpios = <&gpx3 4 0>;
1273         cd-inverted;
1274         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
1275         pinctrl-names = "default";
1276         vmmc-supply = <&ldo21_reg>;
1277         status = "okay";
1278 };
1279
1280 &serial_0 {
1281         status = "okay";
1282 };
1283
1284 &serial_1 {
1285         status = "okay";
1286 };
1287
1288 &serial_2 {
1289         status = "okay";
1290 };
1291
1292 &serial_3 {
1293         status = "okay";
1294 };
1295
1296 &spi_1 {
1297         pinctrl-names = "default";
1298         pinctrl-0 = <&spi1_bus>;
1299         cs-gpios = <&gpb 5 0>;
1300         status = "okay";
1301
1302         s5c73m3_spi: s5c73m3 {
1303                 compatible = "samsung,s5c73m3";
1304                 spi-max-frequency = <50000000>;
1305                 reg = <0>;
1306                 controller-data {
1307                         samsung,spi-feedback-delay = <2>;
1308                 };
1309         };
1310 };
1311
1312 &tmu {
1313         vtmu-supply = <&ldo10_reg>;
1314         status = "okay";
1315 };