arch/arm/boot/dts/armada-xp-mv78230.dtsi

   1 /*
   2  * Device Tree Include file for Marvell Armada XP family SoC
   3  *
   4  * Copyright (C) 2012 Marvell
   5  *
   6  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
   7  *
   8  * This file is licensed under the terms of the GNU General Public
   9  * License version 2.  This program is licensed "as is" without any
  10  * warranty of any kind, whether express or implied.
  11  *
  12  * Contains definitions specific to the Armada XP MV78230 SoC that are not
  13  * common to all Armada XP SoCs.
  14  */
  15
  16 #include "armada-xp.dtsi"
  17
  18 / {
  19         model = "Marvell Armada XP MV78230 SoC";
  20         compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
  21
  22         aliases {
  23                 gpio0 = &gpio0;
  24                 gpio1 = &gpio1;
  25         };
  26
  27         cpus {
  28                 #address-cells = <1>;
  29                 #size-cells = <0>;
  30
  31                 cpu@0 {
  32                         device_type = "cpu";
  33                         compatible = "marvell,sheeva-v7";
  34                         reg = <0>;
  35                         clocks = <&cpuclk 0>;
  36                 };
  37
  38                 cpu@1 {
  39                         device_type = "cpu";
  40                         compatible = "marvell,sheeva-v7";
  41                         reg = <1>;
  42                         clocks = <&cpuclk 1>;
  43                 };
  44         };
  45
  46         soc {
  47                 /*
  48                  * MV78230 has 2 PCIe units Gen2.0: One unit can be
  49                  * configured as x4 or quad x1 lanes. One unit is
  50                  * x1 only.
  51                  */
  52                 pcie-controller {
  53                         compatible = "marvell,armada-xp-pcie";
  54                         status = "disabled";
  55                         device_type = "pci";
  56
  57                         #address-cells = <3>;
  58                         #size-cells = <2>;
  59
  60                         msi-parent = <&mpic>;
  61                         bus-range = <0x00 0xff>;
  62
  63                         ranges =
  64                                <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
  65                                 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
  66                                 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
  67                                 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
  68                                 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
  69                                 0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
  70                                 0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
  71                                 0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
  72                                 0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
  73                                 0x82000000 0x3 0       MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
  74                                 0x81000000 0x3 0       MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
  75                                 0x82000000 0x4 0       MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
  76                                 0x81000000 0x4 0       MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
  77                                 0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
  78                                 0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
  79
  80                         pcie@1,0 {
  81                                 device_type = "pci";
  82                                 assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
  83                                 reg = <0x0800 0 0 0 0>;
  84                                 #address-cells = <3>;
  85                                 #size-cells = <2>;
  86                                 #interrupt-cells = <1>;
  87                                 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
  88                                           0x81000000 0 0 0x81000000 0x1 0 1 0>;
  89                                 interrupt-map-mask = <0 0 0 0>;
  90                                 interrupt-map = <0 0 0 0 &mpic 58>;
  91                                 marvell,pcie-port = <0>;
  92                                 marvell,pcie-lane = <0>;
  93                                 clocks = <&gateclk 5>;
  94                                 status = "disabled";
  95                         };
  96
  97                         pcie@2,0 {
  98                                 device_type = "pci";
  99                                 assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
 100                                 reg = <0x1000 0 0 0 0>;
 101                                 #address-cells = <3>;
 102                                 #size-cells = <2>;
 103                                 #interrupt-cells = <1>;
 104                                 ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 105                                           0x81000000 0 0 0x81000000 0x2 0 1 0>;
 106                                 interrupt-map-mask = <0 0 0 0>;
 107                                 interrupt-map = <0 0 0 0 &mpic 59>;
 108                                 marvell,pcie-port = <0>;
 109                                 marvell,pcie-lane = <1>;
 110                                 clocks = <&gateclk 6>;
 111                                 status = "disabled";
 112                         };
 113
 114                         pcie@3,0 {
 115                                 device_type = "pci";
 116                                 assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
 117                                 reg = <0x1800 0 0 0 0>;
 118                                 #address-cells = <3>;
 119                                 #size-cells = <2>;
 120                                 #interrupt-cells = <1>;
 121                                 ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 122                                           0x81000000 0 0 0x81000000 0x3 0 1 0>;
 123                                 interrupt-map-mask = <0 0 0 0>;
 124                                 interrupt-map = <0 0 0 0 &mpic 60>;
 125                                 marvell,pcie-port = <0>;
 126                                 marvell,pcie-lane = <2>;
 127                                 clocks = <&gateclk 7>;
 128                                 status = "disabled";
 129                         };
 130
 131                         pcie@4,0 {
 132                                 device_type = "pci";
 133                                 assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
 134                                 reg = <0x2000 0 0 0 0>;
 135                                 #address-cells = <3>;
 136                                 #size-cells = <2>;
 137                                 #interrupt-cells = <1>;
 138                                 ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 139                                           0x81000000 0 0 0x81000000 0x4 0 1 0>;
 140                                 interrupt-map-mask = <0 0 0 0>;
 141                                 interrupt-map = <0 0 0 0 &mpic 61>;
 142                                 marvell,pcie-port = <0>;
 143                                 marvell,pcie-lane = <3>;
 144                                 clocks = <&gateclk 8>;
 145                                 status = "disabled";
 146                         };
 147
 148                         pcie@5,0 {
 149                                 device_type = "pci";
 150                                 assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
 151                                 reg = <0x2800 0 0 0 0>;
 152                                 #address-cells = <3>;
 153                                 #size-cells = <2>;
 154                                 #interrupt-cells = <1>;
 155                                 ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
 156                                           0x81000000 0 0 0x81000000 0x5 0 1 0>;
 157                                 interrupt-map-mask = <0 0 0 0>;
 158                                 interrupt-map = <0 0 0 0 &mpic 62>;
 159                                 marvell,pcie-port = <1>;
 160                                 marvell,pcie-lane = <0>;
 161                                 clocks = <&gateclk 9>;
 162                                 status = "disabled";
 163                         };
 164                 };
 165
 166                 internal-regs {
 167                         pinctrl {
 168                                 compatible = "marvell,mv78230-pinctrl";
 169                                 reg = <0x18000 0x38>;
 170
 171                                 sdio_pins: sdio-pins {
 172                                         marvell,pins = "mpp30", "mpp31", "mpp32",
 173                                                        "mpp33", "mpp34", "mpp35";
 174                                         marvell,function = "sd0";
 175                                 };
 176                         };
 177
 178                         gpio0: gpio@18100 {
 179                                 compatible = "marvell,orion-gpio";
 180                                 reg = <0x18100 0x40>;
 181                                 ngpios = <32>;
 182                                 gpio-controller;
 183                                 #gpio-cells = <2>;
 184                                 interrupt-controller;
 185                                 #interrupt-cells = <2>;
 186                                 interrupts = <82>, <83>, <84>, <85>;
 187                         };
 188
 189                         gpio1: gpio@18140 {
 190                                 compatible = "marvell,orion-gpio";
 191                                 reg = <0x18140 0x40>;
 192                                 ngpios = <17>;
 193                                 gpio-controller;
 194                                 #gpio-cells = <2>;
 195                                 interrupt-controller;
 196                                 #interrupt-cells = <2>;
 197                                 interrupts = <87>, <88>, <89>;
 198                         };
 199                 };
 200         };
 201 };