arch/arm/boot/dts/armada-370.dtsi

   1 /*
   2  * Device Tree Include file for Marvell Armada 370 family SoC
   3  *
   4  * Copyright (C) 2012 Marvell
   5  *
   6  * Lior Amsalem <alior@marvell.com>
   7  * Gregory CLEMENT <gregory.clement@free-electrons.com>
   8  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
   9  *
  10  * This file is dual-licensed: you can use it either under the terms
  11  * of the GPL or the X11 license, at your option. Note that this dual
  12  * licensing only applies to this file, and not this project as a
  13  * whole.
  14  *
  15  *  a) This file is free software; you can redistribute it and/or
  16  *     modify it under the terms of the GNU General Public License as
  17  *     published by the Free Software Foundation; either version 2 of the
  18  *     License, or (at your option) any later version.
  19  *
  20  *     This file is distributed in the hope that it will be useful
  21  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  22  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  23  *     GNU General Public License for more details.
  24  *
  25  * Or, alternatively
  26  *
  27  *  b) Permission is hereby granted, free of charge, to any person
  28  *     obtaining a copy of this software and associated documentation
  29  *     files (the "Software"), to deal in the Software without
  30  *     restriction, including without limitation the rights to use
  31  *     copy, modify, merge, publish, distribute, sublicense, and/or
  32  *     sell copies of the Software, and to permit persons to whom the
  33  *     Software is furnished to do so, subject to the following
  34  *     conditions:
  35  *
  36  *     The above copyright notice and this permission notice shall be
  37  *     included in all copies or substantial portions of the Software.
  38  *
  39  *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
  40  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  41  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  42  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  43  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
  44  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  45  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  46  *     OTHER DEALINGS IN THE SOFTWARE.
  47  *
  48  * Contains definitions specific to the Armada 370 SoC that are not
  49  * common to all Armada SoCs.
  50  */
  51
  52 #include "armada-370-xp.dtsi"
  53 /include/ "skeleton.dtsi"
  54
  55 / {
  56         model = "Marvell Armada 370 family SoC";
  57         compatible = "marvell,armada370", "marvell,armada-370-xp";
  58
  59         aliases {
  60                 gpio0 = &gpio0;
  61                 gpio1 = &gpio1;
  62                 gpio2 = &gpio2;
  63         };
  64
  65         soc {
  66                 compatible = "marvell,armada370-mbus", "simple-bus";
  67
  68                 bootrom {
  69                         compatible = "marvell,bootrom";
  70                         reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
  71                 };
  72
  73                 pcie-controller {
  74                         compatible = "marvell,armada-370-pcie";
  75                         status = "disabled";
  76                         device_type = "pci";
  77
  78                         #address-cells = <3>;
  79                         #size-cells = <2>;
  80
  81                         msi-parent = <&mpic>;
  82                         bus-range = <0x00 0xff>;
  83
  84                         ranges =
  85                                <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
  86                                 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
  87                                 0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
  88                                 0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */
  89                                 0x82000000 0x2 0     MBUS_ID(0x08, 0xe8) 0       1 0 /* Port 1.0 MEM */
  90                                 0x81000000 0x2 0     MBUS_ID(0x08, 0xe0) 0       1 0 /* Port 1.0 IO  */>;
  91
  92                         pcie@1,0 {
  93                                 device_type = "pci";
  94                                 assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
  95                                 reg = <0x0800 0 0 0 0>;
  96                                 #address-cells = <3>;
  97                                 #size-cells = <2>;
  98                                 #interrupt-cells = <1>;
  99                                 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 100                                           0x81000000 0 0 0x81000000 0x1 0 1 0>;
 101                                 interrupt-map-mask = <0 0 0 0>;
 102                                 interrupt-map = <0 0 0 0 &mpic 58>;
 103                                 marvell,pcie-port = <0>;
 104                                 marvell,pcie-lane = <0>;
 105                                 clocks = <&gateclk 5>;
 106                                 status = "disabled";
 107                         };
 108
 109                         pcie@2,0 {
 110                                 device_type = "pci";
 111                                 assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 112                                 reg = <0x1000 0 0 0 0>;
 113                                 #address-cells = <3>;
 114                                 #size-cells = <2>;
 115                                 #interrupt-cells = <1>;
 116                                 ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 117                                           0x81000000 0 0 0x81000000 0x2 0 1 0>;
 118                                 interrupt-map-mask = <0 0 0 0>;
 119                                 interrupt-map = <0 0 0 0 &mpic 62>;
 120                                 marvell,pcie-port = <1>;
 121                                 marvell,pcie-lane = <0>;
 122                                 clocks = <&gateclk 9>;
 123                                 status = "disabled";
 124                         };
 125                 };
 126
 127                 internal-regs {
 128                         L2: l2-cache {
 129                                 compatible = "marvell,aurora-outer-cache";
 130                                 reg = <0x08000 0x1000>;
 131                                 cache-id-part = <0x100>;
 132                                 cache-level = <2>;
 133                                 cache-unified;
 134                                 wt-override;
 135                         };
 136
 137                         /*
 138                          * Default SPI pinctrl setting, can be overwritten on
 139                          * board level if a different configuration is used.
 140                          */
 141                         spi0: spi@10600 {
 142                                 compatible = "marvell,armada-370-spi",
 143                                                 "marvell,orion-spi";
 144                                 pinctrl-0 = <&spi0_pins1>;
 145                                 pinctrl-names = "default";
 146                         };
 147
 148                         spi1: spi@10680 {
 149                                 compatible = "marvell,armada-370-spi",
 150                                                 "marvell,orion-spi";
 151                                 pinctrl-0 = <&spi1_pins>;
 152                                 pinctrl-names = "default";
 153                         };
 154
 155                         i2c0: i2c@11000 {
 156                                 reg = <0x11000 0x20>;
 157                         };
 158
 159                         i2c1: i2c@11100 {
 160                                 reg = <0x11100 0x20>;
 161                         };
 162
 163                         gpio0: gpio@18100 {
 164                                 compatible = "marvell,orion-gpio";
 165                                 reg = <0x18100 0x40>;
 166                                 ngpios = <32>;
 167                                 gpio-controller;
 168                                 #gpio-cells = <2>;
 169                                 interrupt-controller;
 170                                 #interrupt-cells = <2>;
 171                                 interrupts = <82>, <83>, <84>, <85>;
 172                         };
 173
 174                         gpio1: gpio@18140 {
 175                                 compatible = "marvell,orion-gpio";
 176                                 reg = <0x18140 0x40>;
 177                                 ngpios = <32>;
 178                                 gpio-controller;
 179                                 #gpio-cells = <2>;
 180                                 interrupt-controller;
 181                                 #interrupt-cells = <2>;
 182                                 interrupts = <87>, <88>, <89>, <90>;
 183                         };
 184
 185                         gpio2: gpio@18180 {
 186                                 compatible = "marvell,orion-gpio";
 187                                 reg = <0x18180 0x40>;
 188                                 ngpios = <2>;
 189                                 gpio-controller;
 190                                 #gpio-cells = <2>;
 191                                 interrupt-controller;
 192                                 #interrupt-cells = <2>;
 193                                 interrupts = <91>;
 194                         };
 195
 196                         /*
 197                          * Default UART pinctrl setting without RTS/CTS, can
 198                          * be overwritten on board level if a different
 199                          * configuration is used.
 200                          */
 201                         uart0: serial@12000 {
 202                                 pinctrl-0 = <&uart0_pins>;
 203                                 pinctrl-names = "default";
 204                         };
 205
 206                         uart1: serial@12100 {
 207                                 pinctrl-0 = <&uart1_pins>;
 208                                 pinctrl-names = "default";
 209                         };
 210
 211                         system-controller@18200 {
 212                                 compatible = "marvell,armada-370-xp-system-controller";
 213                                 reg = <0x18200 0x100>;
 214                         };
 215
 216                         gateclk: clock-gating-control@18220 {
 217                                 compatible = "marvell,armada-370-gating-clock";
 218                                 reg = <0x18220 0x4>;
 219                                 clocks = <&coreclk 0>;
 220                                 #clock-cells = <1>;
 221                         };
 222
 223                         coreclk: mvebu-sar@18230 {
 224                                 compatible = "marvell,armada-370-core-clock";
 225                                 reg = <0x18230 0x08>;
 226                                 #clock-cells = <1>;
 227                         };
 228
 229                         thermal@18300 {
 230                                 compatible = "marvell,armada370-thermal";
 231                                 reg = <0x18300 0x4
 232                                         0x18304 0x4>;
 233                                 status = "okay";
 234                         };
 235
 236                         sscg@18330 {
 237                                 reg = <0x18330 0x4>;
 238                         };
 239
 240                         interrupt-controller@20a00 {
 241                                 reg = <0x20a00 0x1d0>, <0x21870 0x58>;
 242                         };
 243
 244                         timer@20300 {
 245                                 compatible = "marvell,armada-370-timer";
 246                                 clocks = <&coreclk 2>;
 247                         };
 248
 249                         watchdog@20300 {
 250                                 compatible = "marvell,armada-370-wdt";
 251                                 clocks = <&coreclk 2>;
 252                         };
 253
 254                         cpurst@20800 {
 255                                 compatible = "marvell,armada-370-cpu-reset";
 256                                 reg = <0x20800 0x8>;
 257                         };
 258
 259                         audio_controller: audio-controller@30000 {
 260                                 #sound-dai-cells = <1>;
 261                                 compatible = "marvell,armada370-audio";
 262                                 reg = <0x30000 0x4000>;
 263                                 interrupts = <93>;
 264                                 clocks = <&gateclk 0>;
 265                                 clock-names = "internal";
 266                                 status = "disabled";
 267                         };
 268
 269                         usb@50000 {
 270                                 clocks = <&coreclk 0>;
 271                         };
 272
 273                         usb@51000 {
 274                                 clocks = <&coreclk 0>;
 275                         };
 276
 277                         xor@60800 {
 278                                 compatible = "marvell,orion-xor";
 279                                 reg = <0x60800 0x100
 280                                        0x60A00 0x100>;
 281                                 status = "okay";
 282
 283                                 xor00 {
 284                                         interrupts = <51>;
 285                                         dmacap,memcpy;
 286                                         dmacap,xor;
 287                                 };
 288                                 xor01 {
 289                                         interrupts = <52>;
 290                                         dmacap,memcpy;
 291                                         dmacap,xor;
 292                                         dmacap,memset;
 293                                 };
 294                         };
 295
 296                         xor@60900 {
 297                                 compatible = "marvell,orion-xor";
 298                                 reg = <0x60900 0x100
 299                                        0x60b00 0x100>;
 300                                 status = "okay";
 301
 302                                 xor10 {
 303                                         interrupts = <94>;
 304                                         dmacap,memcpy;
 305                                         dmacap,xor;
 306                                 };
 307                                 xor11 {
 308                                         interrupts = <95>;
 309                                         dmacap,memcpy;
 310                                         dmacap,xor;
 311                                         dmacap,memset;
 312                                 };
 313                         };
 314
 315                         ethernet@70000 {
 316                                 compatible = "marvell,armada-370-neta";
 317                         };
 318
 319                         ethernet@74000 {
 320                                 compatible = "marvell,armada-370-neta";
 321                         };
 322                 };
 323         };
 324 };
 325
 326 &pinctrl {
 327         compatible = "marvell,mv88f6710-pinctrl";
 328
 329         spi0_pins1: spi0-pins1 {
 330                 marvell,pins = "mpp33", "mpp34",
 331                                "mpp35", "mpp36";
 332                 marvell,function = "spi0";
 333         };
 334
 335         spi0_pins2: spi0_pins2 {
 336                 marvell,pins = "mpp32", "mpp63",
 337                                "mpp64", "mpp65";
 338                 marvell,function = "spi0";
 339         };
 340
 341         spi1_pins: spi1-pins {
 342                 marvell,pins = "mpp49", "mpp50",
 343                                "mpp51", "mpp52";
 344                 marvell,function = "spi1";
 345         };
 346
 347         uart0_pins: uart0-pins {
 348                 marvell,pins = "mpp0", "mpp1";
 349                 marvell,function = "uart0";
 350         };
 351
 352         uart1_pins: uart1-pins {
 353                 marvell,pins = "mpp41", "mpp42";
 354                 marvell,function = "uart1";
 355         };
 356
 357         sdio_pins1: sdio-pins1 {
 358                 marvell,pins = "mpp9",  "mpp11", "mpp12",
 359                                 "mpp13", "mpp14", "mpp15";
 360                 marvell,function = "sd0";
 361         };
 362
 363         sdio_pins2: sdio-pins2 {
 364                 marvell,pins = "mpp47", "mpp48", "mpp49",
 365                                 "mpp50", "mpp51", "mpp52";
 366                 marvell,function = "sd0";
 367         };
 368
 369         sdio_pins3: sdio-pins3 {
 370                 marvell,pins = "mpp48", "mpp49", "mpp50",
 371                                 "mpp51", "mpp52", "mpp53";
 372                 marvell,function = "sd0";
 373         };
 374
 375         i2c0_pins: i2c0-pins {
 376                 marvell,pins = "mpp2", "mpp3";
 377                 marvell,function = "i2c0";
 378         };
 379
 380         i2s_pins1: i2s-pins1 {
 381                 marvell,pins = "mpp5", "mpp6", "mpp7",
 382                                "mpp8", "mpp9", "mpp10",
 383                                "mpp12", "mpp13";
 384                 marvell,function = "audio";
 385         };
 386
 387         i2s_pins2: i2s-pins2 {
 388                 marvell,pins = "mpp49", "mpp47", "mpp50",
 389                                "mpp59", "mpp57", "mpp61",
 390                                "mpp62", "mpp60", "mpp58";
 391                 marvell,function = "audio";
 392         };
 393
 394         mdio_pins: mdio-pins {
 395                 marvell,pins = "mpp17", "mpp18";
 396                 marvell,function = "ge";
 397         };
 398
 399         ge0_rgmii_pins: ge0-rgmii-pins {
 400                 marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8",
 401                                "mpp9", "mpp10", "mpp11", "mpp12",
 402                                "mpp13", "mpp14", "mpp15", "mpp16";
 403                 marvell,function = "ge0";
 404         };
 405
 406         ge1_rgmii_pins: ge1-rgmii-pins {
 407                 marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22",
 408                                "mpp23", "mpp24", "mpp25", "mpp26",
 409                                "mpp27", "mpp28", "mpp29", "mpp30";
 410                 marvell,function = "ge1";
 411         };
 412 };