join->rx_config_options = cpu_to_le32(wl->rx_config);
join->rx_filter_options = cpu_to_le32(wl->rx_filter);
join->bss_type = bss_type;
+ join->basic_rate_set = wl->basic_rate_set;
- if (wl->band == IEEE80211_BAND_2GHZ)
- join->basic_rate_set = cpu_to_le32(CONF_HW_BIT_RATE_1MBPS |
- CONF_HW_BIT_RATE_2MBPS |
- CONF_HW_BIT_RATE_5_5MBPS |
- CONF_HW_BIT_RATE_11MBPS);
- else {
+ if (wl->band == IEEE80211_BAND_5GHZ)
join->bss_type |= WL1271_JOIN_CMD_BSS_TYPE_5GHZ;
- join->basic_rate_set = cpu_to_le32(CONF_HW_BIT_RATE_6MBPS |
- CONF_HW_BIT_RATE_12MBPS |
- CONF_HW_BIT_RATE_24MBPS);
- }
join->beacon_interval = cpu_to_le16(wl->beacon_int);
join->dtim_interval = WL1271_DEFAULT_DTIM_PERIOD;
struct wl1271_cmd_trigger_scan_to *trigger = NULL;
struct wl1271_cmd_scan *params = NULL;
struct ieee80211_channel *channels;
+ u32 rate;
int i, j, n_ch, ret;
u16 scan_options = 0;
u8 ieee_band;
- if (band == WL1271_SCAN_BAND_2_4_GHZ)
+ if (band == WL1271_SCAN_BAND_2_4_GHZ) {
ieee_band = IEEE80211_BAND_2GHZ;
- else if (band == WL1271_SCAN_BAND_DUAL && wl1271_11a_enabled())
+ rate = wl->conf.tx.basic_rate;
+ } else if (band == WL1271_SCAN_BAND_DUAL && wl1271_11a_enabled()) {
ieee_band = IEEE80211_BAND_2GHZ;
- else if (band == WL1271_SCAN_BAND_5_GHZ && wl1271_11a_enabled())
+ rate = wl->conf.tx.basic_rate;
+ } else if (band == WL1271_SCAN_BAND_5_GHZ && wl1271_11a_enabled()) {
ieee_band = IEEE80211_BAND_5GHZ;
- else
+ rate = wl->conf.tx.basic_rate_5;
+ } else
return -EINVAL;
if (wl->hw->wiphy->bands[ieee_band]->channels == NULL)
params->params.scan_options = cpu_to_le16(scan_options);
params->params.num_probe_requests = probe_requests;
- /* Let the fw autodetect suitable tx_rate for probes */
- params->params.tx_rate = 0;
+ params->params.tx_rate = rate;
params->params.tid_trigger = 0;
params->params.scan_tag = WL1271_SCAN_DEFAULT_TAG;
.tx = {
.tx_energy_detection = 0,
.rc_conf = {
- .enabled_rates = CONF_HW_BIT_RATE_1MBPS |
- CONF_HW_BIT_RATE_2MBPS,
+ .enabled_rates = 0,
.short_retry_limit = 10,
.long_retry_limit = 10,
.aflags = 0
},
.frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD,
.tx_compl_timeout = 700,
- .tx_compl_threshold = 4
+ .tx_compl_threshold = 4,
+ .basic_rate = CONF_HW_BIT_RATE_1MBPS,
+ .basic_rate_5 = CONF_HW_BIT_RATE_6MBPS,
},
.conn = {
.wake_up_event = CONF_WAKE_UP_EVENT_DTIM,
return ret;
}
+static void wl1271_set_band_rate(struct wl1271 *wl)
+{
+ if (wl->band == IEEE80211_BAND_2GHZ)
+ wl->basic_rate_set = wl->conf.tx.basic_rate;
+ else
+ wl->basic_rate_set = wl->conf.tx.basic_rate_5;
+}
+
+static u32 wl1271_min_rate_get(struct wl1271 *wl)
+{
+ int i;
+ u32 rate = 0;
+
+ if (!wl->basic_rate_set) {
+ WARN_ON(1);
+ wl->basic_rate_set = wl->conf.tx.basic_rate;
+ }
+
+ for (i = 0; !rate; i++) {
+ if ((wl->basic_rate_set >> i) & 0x1)
+ rate = 1 << i;
+ }
+
+ return rate;
+}
+
static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
{
struct wl1271 *wl = hw->priv;
mutex_lock(&wl->mutex);
- wl->band = conf->channel->band;
-
ret = wl1271_ps_elp_wakeup(wl, false);
if (ret < 0)
goto out;
+ /* if the channel changes while joined, join again */
+ if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+ wl->band = conf->channel->band;
+ wl->channel = channel;
+
+ /*
+ * FIXME: the mac80211 should really provide a fixed rate
+ * to use here. for now, just use the smallest possible rate
+ * for the band as a fixed rate for association frames and
+ * other control messages.
+ */
+ if (!test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags))
+ wl1271_set_band_rate(wl);
+
+ wl->basic_rate = wl1271_min_rate_get(wl);
+ ret = wl1271_acx_rate_policies(wl);
+ if (ret < 0)
+ wl1271_warning("rate policy for update channel "
+ "failed %d", ret);
+
+ if (test_bit(WL1271_FLAG_JOINED, &wl->flags)) {
+ ret = wl1271_cmd_join(wl, wl->set_bss_type);
+ if (ret < 0)
+ wl1271_warning("cmd join to update channel "
+ "failed %d", ret);
+ }
+ }
+
if (changed & IEEE80211_CONF_CHANGE_IDLE) {
if (conf->flags & IEEE80211_CONF_IDLE &&
test_bit(WL1271_FLAG_JOINED, &wl->flags))
wl1271_join_channel(wl, channel);
if (conf->flags & IEEE80211_CONF_IDLE) {
- wl->rate_set = CONF_TX_RATE_MASK_BASIC;
+ wl->rate_set = wl1271_min_rate_get(wl);
wl->sta_rate_set = 0;
wl1271_acx_rate_policies(wl);
wl1271_acx_keep_alive_config(
}
}
- /* if the channel changes while joined, join again */
- if (channel != wl->channel &&
- test_bit(WL1271_FLAG_JOINED, &wl->flags)) {
- wl->channel = channel;
- /* FIXME: maybe use CMD_CHANNEL_SWITCH for this? */
- ret = wl1271_cmd_join(wl, wl->set_bss_type);
- if (ret < 0)
- wl1271_warning("cmd join to update channel failed %d",
- ret);
- } else
- wl->channel = channel;
-
if (conf->flags & IEEE80211_CONF_PS &&
!test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags)) {
set_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags);
if (changed & BSS_CHANGED_ASSOC) {
if (bss_conf->assoc) {
+ u32 rates;
wl->aid = bss_conf->aid;
set_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags);
+ /*
+ * use basic rates from AP, and determine lowest rate
+ * to use with control frames.
+ */
+ rates = bss_conf->basic_rates;
+ wl->basic_rate_set = wl1271_tx_enabled_rates_get(wl,
+ rates);
+ wl->basic_rate = wl1271_min_rate_get(wl);
+ ret = wl1271_acx_rate_policies(wl);
+ if (ret < 0)
+ goto out_sleep;
+
/*
* with wl1271, we don't need to update the
* beacon_int and dtim_period, because the firmware
clear_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags);
wl->aid = 0;
+ /* revert back to minimum rates for the current band */
+ wl1271_set_band_rate(wl);
+ wl->basic_rate = wl1271_min_rate_get(wl);
+ ret = wl1271_acx_rate_policies(wl);
+ if (ret < 0)
+ goto out_sleep;
+
/* disable connection monitor features */
ret = wl1271_acx_conn_monit_params(wl, false);
wl->psm_entry_retry = 0;
wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
wl->basic_rate_set = CONF_TX_RATE_MASK_BASIC;
+ wl->basic_rate = CONF_TX_RATE_MASK_BASIC;
wl->rate_set = CONF_TX_RATE_MASK_BASIC;
wl->sta_rate_set = 0;
wl->band = IEEE80211_BAND_2GHZ;
projects / linux.git / commitdiff