RM9000 serial driver
authorThomas Koeller <thomas.koeller@baslerweb.com>
Sun, 6 May 2007 21:48:47 +0000 (14:48 -0700)
committerLinus Torvalds <torvalds@woody.linux-foundation.org>
Mon, 7 May 2007 19:12:50 +0000 (12:12 -0700)
Add support for the integrated serial ports of the MIPS RM9122 processor
and its relatives.

The patch also does some whitespace cleanup.

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arch/mips/Kconfig
drivers/serial/8250.c
drivers/serial/Kconfig
include/linux/serial_core.h

index 130d825e5438a5d5b16cb098225d0a5bfa278b39..7441a2cf523ee929edbddb072a5764032422d934 100644 (file)
@@ -1042,6 +1042,9 @@ config SOC_AU1X00
        select SYS_SUPPORTS_APM_EMULATION
        select SYS_SUPPORTS_KGDB
 
+config SERIAL_RM9000
+       bool
+
 config PNX8550
        bool
        select SOC_PNX8550
index 194362d9f5a33f7fbe269f34ff6824f188cc93c3..c9832d963f1efaf715f78a54cbd7d14c8d3ad64c 100644 (file)
@@ -251,9 +251,16 @@ static const struct serial8250_config uart_config[] = {
                .fcr            = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
                .flags          = UART_CAP_FIFO | UART_CAP_UUE,
        },
+       [PORT_RM9000] = {
+               .name           = "RM9000",
+               .fifo_size      = 16,
+               .tx_loadsz      = 16,
+               .fcr            = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+               .flags          = UART_CAP_FIFO,
+       },
 };
 
-#ifdef CONFIG_SERIAL_8250_AU1X00
+#if defined (CONFIG_SERIAL_8250_AU1X00)
 
 /* Au1x00 UART hardware has a weird register layout */
 static const u8 au_io_in_map[] = {
@@ -289,6 +296,44 @@ static inline int map_8250_out_reg(struct uart_8250_port *up, int offset)
        return au_io_out_map[offset];
 }
 
+#elif defined (CONFIG_SERIAL_8250_RM9K)
+
+static const u8
+       regmap_in[8] = {
+               [UART_RX]       = 0x00,
+               [UART_IER]      = 0x0c,
+               [UART_IIR]      = 0x14,
+               [UART_LCR]      = 0x1c,
+               [UART_MCR]      = 0x20,
+               [UART_LSR]      = 0x24,
+               [UART_MSR]      = 0x28,
+               [UART_SCR]      = 0x2c
+       },
+       regmap_out[8] = {
+               [UART_TX]       = 0x04,
+               [UART_IER]      = 0x0c,
+               [UART_FCR]      = 0x18,
+               [UART_LCR]      = 0x1c,
+               [UART_MCR]      = 0x20,
+               [UART_LSR]      = 0x24,
+               [UART_MSR]      = 0x28,
+               [UART_SCR]      = 0x2c
+       };
+
+static inline int map_8250_in_reg(struct uart_8250_port *up, int offset)
+{
+       if (up->port.iotype != UPIO_RM9000)
+               return offset;
+       return regmap_in[offset];
+}
+
+static inline int map_8250_out_reg(struct uart_8250_port *up, int offset)
+{
+       if (up->port.iotype != UPIO_RM9000)
+               return offset;
+       return regmap_out[offset];
+}
+
 #else
 
 /* sane hardware needs no mapping */
@@ -311,6 +356,7 @@ static unsigned int serial_in(struct uart_8250_port *up, int offset)
        case UPIO_DWAPB:
                return readb(up->port.membase + offset);
 
+       case UPIO_RM9000:
        case UPIO_MEM32:
                return readl(up->port.membase + offset);
 
@@ -348,6 +394,7 @@ serial_out(struct uart_8250_port *up, int offset, int value)
                writeb(value, up->port.membase + offset);
                break;
 
+       case UPIO_RM9000:
        case UPIO_MEM32:
                writel(value, up->port.membase + offset);
                break;
@@ -419,7 +466,7 @@ static inline void _serial_dl_write(struct uart_8250_port *up, int value)
        serial_outp(up, UART_DLM, value >> 8 & 0xff);
 }
 
-#ifdef CONFIG_SERIAL_8250_AU1X00
+#if defined (CONFIG_SERIAL_8250_AU1X00)
 /* Au1x00 haven't got a standard divisor latch */
 static int serial_dl_read(struct uart_8250_port *up)
 {
@@ -436,6 +483,24 @@ static void serial_dl_write(struct uart_8250_port *up, int value)
        else
                _serial_dl_write(up, value);
 }
+#elif defined (CONFIG_SERIAL_8250_RM9K)
+static int serial_dl_read(struct uart_8250_port *up)
+{
+       return  (up->port.iotype == UPIO_RM9000) ?
+               (((__raw_readl(up->port.membase + 0x10) << 8) |
+               (__raw_readl(up->port.membase + 0x08) & 0xff)) & 0xffff) :
+               _serial_dl_read(up);
+}
+
+static void serial_dl_write(struct uart_8250_port *up, int value)
+{
+       if (up->port.iotype == UPIO_RM9000) {
+               __raw_writel(value, up->port.membase + 0x08);
+               __raw_writel(value >> 8, up->port.membase + 0x10);
+       } else {
+               _serial_dl_write(up, value);
+       }
+}
 #else
 #define serial_dl_read(up) _serial_dl_read(up)
 #define serial_dl_write(up, value) _serial_dl_write(up, value)
@@ -637,7 +702,7 @@ static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
  * its clones.  (We treat the broken original StarTech 16650 V1 as a
  * 16550, and why not?  Startech doesn't seem to even acknowledge its
  * existence.)
- * 
+ *
  * What evil have men's minds wrought...
  */
 static void autoconfig_has_efr(struct uart_8250_port *up)
@@ -690,7 +755,7 @@ static void autoconfig_has_efr(struct uart_8250_port *up)
                        up->bugs |= UART_BUG_QUOT;
                return;
        }
-       
+
        /*
         * We check for a XR16C850 by setting DLL and DLM to 0, and then
         * reading back DLL and DLM.  The chip type depends on the DLM
@@ -833,7 +898,7 @@ static void autoconfig_16550a(struct uart_8250_port *up)
                        status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
                        status1 |= 0x10;  /* 1.625 divisor for baud_base --> 921600 */
                        serial_outp(up, 0x04, status1);
-                       
+
                        serial_dl_write(up, quot);
 
                        serial_outp(up, UART_LCR, 0);
@@ -938,7 +1003,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
                /*
                 * Do a simple existence test first; if we fail this,
                 * there's no point trying anything else.
-                * 
+                *
                 * 0x80 is used as a nonsense port to prevent against
                 * false positives due to ISA bus float.  The
                 * assumption is that 0x80 is a non-existent port;
@@ -977,7 +1042,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
        save_mcr = serial_in(up, UART_MCR);
        save_lcr = serial_in(up, UART_LCR);
 
-       /* 
+       /*
         * Check to see if a UART is really there.  Certain broken
         * internal modems based on the Rockwell chipset fail this
         * test, because they apparently don't implement the loopback
@@ -1084,7 +1149,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
        else
                serial_outp(up, UART_IER, 0);
 
- out:  
+ out:
        spin_unlock_irqrestore(&up->port.lock, flags);
 //     restore_flags(flags);
        DEBUG_AUTOCONF("type=%s\n", uart_config[up->port.type].name);
@@ -1110,7 +1175,7 @@ static void autoconfig_irq(struct uart_8250_port *up)
        save_mcr = serial_inp(up, UART_MCR);
        save_ier = serial_inp(up, UART_IER);
        serial_outp(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2);
-       
+
        irqs = probe_irq_on();
        serial_outp(up, UART_MCR, 0);
        udelay (10);
@@ -1175,8 +1240,11 @@ static void serial8250_start_tx(struct uart_port *port)
                if (up->bugs & UART_BUG_TXEN) {
                        unsigned char lsr, iir;
                        lsr = serial_in(up, UART_LSR);
-                       iir = serial_in(up, UART_IIR);
-                       if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT)
+                       iir = serial_in(up, UART_IIR) & 0x0f;
+                       if ((up->port.type == PORT_RM9000) ?
+                               (lsr & UART_LSR_THRE &&
+                               (iir == UART_IIR_NO_INT || iir == UART_IIR_THRI)) :
+                               (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT))
                                transmit_chars(up);
                }
        }
@@ -1957,7 +2025,7 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
        /*
         * Ask the core to calculate the divisor for us.
         */
-       baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); 
+       baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
        quot = serial8250_get_divisor(port, baud);
 
        /*
index ad9f321968e1d24061272ece20db34b0b12d3084..e9d927e3b8e6cc8d2dd159457d72f2bd08d98f54 100644 (file)
@@ -254,6 +254,15 @@ config SERIAL_8250_AU1X00
          to this option.  The driver can handle 1 or 2 serial ports.
          If unsure, say N.
 
+config SERIAL_8250_RM9K
+       bool "Support for MIPS RM9xxx integrated serial port"
+       depends on SERIAL_8250 != n && SERIAL_RM9000
+       select SERIAL_8250_SHARE_IRQ
+       help
+         Selecting this option will add support for the integrated serial
+         port hardware found on MIPS RM9122 and similar processors.
+         If unsure, say N.
+
 comment "Non-8250 serial port support"
 
 config SERIAL_AMBA_PL010
index 8b5592e6aca430df2a66ad1f517fcdc31b003d2f..d242c731491f2430288f0a936d4febf41157c9cb 100644 (file)
@@ -39,7 +39,8 @@
 #define PORT_RSA       13
 #define PORT_NS16550A  14
 #define PORT_XSCALE    15
-#define PORT_MAX_8250  15      /* max port ID */
+#define PORT_RM9000    16      /* PMC-Sierra RM9xxx internal UART */
+#define PORT_MAX_8250  16      /* max port ID */
 
 /*
  * ARM specific type numbers.  These are not currently guaranteed
@@ -231,6 +232,7 @@ struct uart_port {
 #define UPIO_AU                        (4)                     /* Au1x00 type IO */
 #define UPIO_TSI               (5)                     /* Tsi108/109 type IO */
 #define UPIO_DWAPB             (6)                     /* DesignWare APB UART */
+#define UPIO_RM9000            (7)                     /* RM9000 type IO */
 
        unsigned int            read_status_mask;       /* driver specific */
        unsigned int            ignore_status_mask;     /* driver specific */