armv7: Add support for ST-Ericsson U8500 href platform
authorJohn Rigby <john.rigby@linaro.org>
Tue, 19 Apr 2011 10:42:42 +0000 (10:42 +0000)
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>
Wed, 1 Jun 2011 17:31:03 +0000 (19:31 +0200)
Minimal platform support to boot linux from SD.

Supported devices/hw limited to external MMC/SD slot,
GPIO, I2C and minimal PRCMU.

Signed-off-by: John Rigby <john.rigby@linaro.org>
CC: Albert Aribaud <albert.aribaud@free.fr>
board/st-ericsson/u8500/Makefile [new file with mode: 0644]
board/st-ericsson/u8500/gpio.c [new file with mode: 0644]
board/st-ericsson/u8500/prcmu-fw.h [new file with mode: 0644]
board/st-ericsson/u8500/prcmu.c [new file with mode: 0644]
board/st-ericsson/u8500/u8500_href.c [new file with mode: 0644]
boards.cfg
include/configs/u8500_href.h [new file with mode: 0644]

diff --git a/board/st-ericsson/u8500/Makefile b/board/st-ericsson/u8500/Makefile
new file mode 100644 (file)
index 0000000..91c2abf
--- /dev/null
@@ -0,0 +1,50 @@
+#
+# Copyright (C) ST-Ericsson SA 2009
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+CFLAGS += -D__RELEASE -D__STN_8500
+LIB    = $(obj)lib$(BOARD).o
+
+COBJS  := u8500_href.o gpio.o prcmu.o
+
+SRCS   := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS   := $(addprefix $(obj),$(COBJS))
+SOBJS  := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+       $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+clean:
+       rm -f $(SOBJS) $(OBJS)
+
+distclean:     clean
+       rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/st-ericsson/u8500/gpio.c b/board/st-ericsson/u8500/gpio.c
new file mode 100644 (file)
index 0000000..96b2461
--- /dev/null
@@ -0,0 +1,347 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2009
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/gpio.h>
+
+static struct gpio_register *addr_gpio_register[] = {
+       (void *)U8500_GPIO_0_BASE,
+       (void *)U8500_GPIO_1_BASE,
+       (void *)U8500_GPIO_2_BASE,
+       (void *)U8500_GPIO_3_BASE,
+       (void *)U8500_GPIO_4_BASE,
+       (void *)U8500_GPIO_5_BASE,
+       (void *)U8500_GPIO_6_BASE,
+       (void *)U8500_GPIO_7_BASE,
+       (void *)U8500_GPIO_8_BASE,
+};
+
+struct gpio_altfun_data altfun_table[] = {
+       {
+               .altfun = GPIO_ALT_I2C_0,
+               .start = 147,
+               .end = 148,
+               .cont = 0,
+               .type = GPIO_ALTF_A,
+       },
+       {
+               .altfun = GPIO_ALT_I2C_1,
+               .start = 16,
+               .end = 17,
+               .cont = 0,
+               .type = GPIO_ALTF_B,
+       },
+       {
+               .altfun = GPIO_ALT_I2C_2,
+               .start = 10,
+               .end = 11,
+               .cont = 0,
+               .type = GPIO_ALTF_B,
+       },
+       {
+               .altfun = GPIO_ALT_I2C_3,
+               .start = 229,
+               .end = 230,
+               .cont = 0,
+               .type = GPIO_ALTF_C,
+       },
+       {
+               .altfun = GPIO_ALT_UART_0_MODEM,
+               .start = 0,
+               .end = 3,
+               .cont = 1,
+               .type = GPIO_ALTF_A,
+       },
+       {
+               .altfun = GPIO_ALT_UART_0_MODEM,
+               .start = 33,
+               .end = 36,
+               .cont = 0,
+               .type = GPIO_ALTF_C,
+       },
+       {
+               .altfun = GPIO_ALT_UART_1,
+               .start = 4,
+               .end = 7,
+               .cont = 0,
+               .type =
+                       GPIO_ALTF_A,
+       },
+       {
+               .altfun = GPIO_ALT_UART_2,
+               .start = 18,
+               .end = 19,
+               .cont = 1,
+               .type = GPIO_ALTF_B,
+       },
+       {
+               .altfun = GPIO_ALT_UART_2,
+               .start = 29,
+               .end = 32,
+               .cont = 0,
+               .type = GPIO_ALTF_C,
+       },
+       {
+               .altfun = GPIO_ALT_MSP_0,
+               .start = 12,
+               .end = 17,
+               .cont = 1,
+               .type = GPIO_ALTF_A,
+       },
+       {
+               .altfun = GPIO_ALT_MSP_0,
+               .start = 21,
+               .end = 21,
+               .cont = 0,
+               .type = GPIO_ALTF_B,
+       },
+       {
+               .altfun = GPIO_ALT_MSP_1,
+               .start = 33,
+               .end = 36,
+               .cont = 0,
+               .type = GPIO_ALTF_A,
+       },
+       {
+               .altfun = GPIO_ALT_MSP_2,
+               .start = 192,
+               .end = 196,
+               .cont = 0,
+               .type = GPIO_ALTF_A,
+       },
+       {
+               .altfun = GPIO_ALT_LCD_PANEL,
+               .start = 64,
+               .end = 93,
+               .cont = 1,
+               .type = GPIO_ALTF_A,
+       },
+       {
+               .altfun = GPIO_ALT_LCD_PANEL,
+               .start = 150,
+               .end = 171,
+               .cont = 0,
+               .type = GPIO_ALTF_B,
+       },
+       {
+               .altfun = GPIO_ALT_SD_CARD0,
+               .start = 18,
+               .end = 28,
+               .cont = 0,
+               .type = GPIO_ALTF_A,
+       },
+       {
+               .altfun = GPIO_ALT_MM_CARD0,
+               .start = 18,
+               .end = 32,
+               .cont = 0,
+               .type = GPIO_ALTF_A,
+       },
+       {
+               .altfun = GPIO_ALT_USB_OTG,
+               .start = 256,
+               .end = 267,
+               .cont = 0,
+               .type = GPIO_ALTF_A,
+       },
+       {
+               .altfun = GPIO_ALT_EMMC,
+               .start = 197,
+               .end = 207,
+               .cont = 0,
+               .type = GPIO_ALTF_A,
+       },
+       {
+               .altfun = GPIO_ALT_POP_EMMC,
+               .start = 128,
+               .end = 138,
+               .cont = 0,
+               .type = GPIO_ALTF_A,
+       },
+};
+
+/*
+ * Static Function declarations
+ */
+enum gpio_error gpio_setpinconfig(int pin_id, struct gpio_config *config)
+{
+       struct gpio_register *p_gpio_register =
+           addr_gpio_register[GPIO_BLOCK(pin_id)];
+       u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK);
+       enum gpio_error error = GPIO_OK;
+       u32 temp_reg;
+
+       switch (config->mode) {
+       case GPIO_ALTF_A:
+               temp_reg = readl(&p_gpio_register->gpio_afsa);
+               temp_reg |= mask;
+               writel(temp_reg, &p_gpio_register->gpio_afsa);
+               temp_reg = readl(&p_gpio_register->gpio_afsb);
+               temp_reg &= ~mask;
+               writel(temp_reg, &p_gpio_register->gpio_afsb);
+               break;
+       case GPIO_ALTF_B:
+               temp_reg = readl(&p_gpio_register->gpio_afsa);
+               temp_reg &= ~mask;
+               writel(temp_reg, &p_gpio_register->gpio_afsa);
+               temp_reg = readl(&p_gpio_register->gpio_afsb);
+               temp_reg |= mask;
+               writel(temp_reg, &p_gpio_register->gpio_afsb);
+               break;
+       case GPIO_ALTF_C:
+               temp_reg = readl(&p_gpio_register->gpio_afsa);
+               temp_reg |= mask;
+               writel(temp_reg, &p_gpio_register->gpio_afsa);
+               temp_reg = readl(&p_gpio_register->gpio_afsb);
+               temp_reg |= mask;
+               writel(temp_reg, &p_gpio_register->gpio_afsb);
+               break;
+       case GPIO_MODE_SOFTWARE:
+               temp_reg = readl(&p_gpio_register->gpio_afsa);
+               temp_reg &= ~mask;
+               writel(temp_reg, &p_gpio_register->gpio_afsa);
+               temp_reg = readl(&p_gpio_register->gpio_afsb);
+               temp_reg &= ~mask;
+               writel(temp_reg, &p_gpio_register->gpio_afsb);
+
+               switch (config->direction) {
+               case GPIO_DIR_INPUT:
+                       writel(mask, &p_gpio_register->gpio_dirc);
+                       break;
+               case GPIO_DIR_OUTPUT:
+                       writel(mask, &p_gpio_register->gpio_dirs);
+                       break;
+               case GPIO_DIR_LEAVE_UNCHANGED:
+                       break;
+               default:
+                       return GPIO_INVALID_PARAMETER;
+               }
+
+               break;
+       case GPIO_MODE_LEAVE_UNCHANGED:
+               break;
+       default:
+               return GPIO_INVALID_PARAMETER;
+       }
+       return error;
+}
+
+enum gpio_error gpio_resetgpiopin(int pin_id, char *dev_name)
+{
+       struct gpio_register *p_gpio_register =
+           addr_gpio_register[GPIO_BLOCK(pin_id)];
+       u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK);
+       enum gpio_error error = GPIO_OK;
+       u32 temp_reg;
+
+       temp_reg = readl(&p_gpio_register->gpio_afsa);
+       temp_reg &= ~mask;
+       writel(temp_reg, &p_gpio_register->gpio_afsa);
+       temp_reg = readl(&p_gpio_register->gpio_afsb);
+       temp_reg &= ~mask;
+       writel(temp_reg, &p_gpio_register->gpio_afsb);
+       writel(mask, &p_gpio_register->gpio_dirc);
+
+       return error;
+}
+
+struct gpio_config altfun_pinconfig;
+enum gpio_error gpio_altfunction(enum gpio_alt_function alt_func,
+                           int which_altfunc, char *dev_name)
+{
+       int i, j, start, end;
+       enum gpio_error error = -1;
+
+       for (i = 0; i < ARRAY_SIZE(altfun_table); i++) {
+               if (altfun_table[i].altfun != alt_func)
+                       continue;
+
+               start = altfun_table[i].start;
+               end = altfun_table[i].end;
+               for (j = start; j <= end; j++) {
+                       if (which_altfunc == GPIO_ALTF_FIND)
+                               altfun_pinconfig.mode = altfun_table[i].type;
+                       else
+                               altfun_pinconfig.mode = which_altfunc;
+                       altfun_pinconfig.direction = GPIO_DIR_OUTPUT;
+                       altfun_pinconfig.dev_name = dev_name;
+
+                       if (which_altfunc != GPIO_ALTF_DISABLE)
+                               error = gpio_setpinconfig(j, &altfun_pinconfig);
+                       else
+                               error = gpio_resetgpiopin(j, dev_name);
+                       if (!error)
+                               continue;
+                       printf("GPIO %d configuration failure (nmdk_error:%d)",
+                               j, error);
+                       error = GPIO_INVALID_PARAMETER;
+                       return error;
+               }
+
+               if (!altfun_table[i].cont)
+                       break;
+       }
+       return error;
+}
+
+int gpio_writepin(int pin_id, enum gpio_data value, char *dev_name)
+{
+       struct gpio_register *p_gpio_register =
+           addr_gpio_register[GPIO_BLOCK(pin_id)];
+       u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK);
+
+       switch (value) {
+       case GPIO_DATA_HIGH:
+               writel(mask, &p_gpio_register->gpio_dats);
+               break;
+       case GPIO_DATA_LOW:
+               writel(mask, &p_gpio_register->gpio_datc);
+               break;
+       default:
+               printf("Invalid value passed in %s", __FUNCTION__);
+               return GPIO_INVALID_PARAMETER;
+       }
+       return GPIO_OK;
+}
+
+int gpio_readpin(int pin_id, enum gpio_data *rv)
+{
+       struct gpio_register *p_gpio_register =
+           addr_gpio_register[GPIO_BLOCK(pin_id)];
+       u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK);
+
+       if ((readl(&p_gpio_register->gpio_dat) & mask) != 0)
+               *rv = GPIO_DATA_HIGH;
+       else
+               *rv = GPIO_DATA_LOW;
+       return GPIO_OK;
+}
+
+int gpio_altfuncenable(enum gpio_alt_function altfunc, char *dev_name)
+{
+       return (int)gpio_altfunction(altfunc, GPIO_ALTF_FIND, dev_name);
+}
+
+int gpio_altfuncdisable(enum gpio_alt_function altfunc, char *dev_name)
+{
+       return (int)gpio_altfunction(altfunc, GPIO_ALTF_DISABLE, dev_name);
+}
diff --git a/board/st-ericsson/u8500/prcmu-fw.h b/board/st-ericsson/u8500/prcmu-fw.h
new file mode 100644 (file)
index 0000000..0836983
--- /dev/null
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson SA
+ *
+ * Copied from the Linux version:
+ * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __MACH_PRCMU_FW_V1_H
+#define __MACH_PRCMU_FW_V1_H
+
+#define AP_EXECUTE     2
+#define I2CREAD                1
+#define I2C_WR_OK      1
+#define I2C_RD_OK      2
+#define I2CWRITE       0
+
+#define _PRCMU_TCDM_BASE    U8500_PRCMU_TCDM_BASE
+#define PRCM_XP70_CUR_PWR_STATE (_PRCMU_TCDM_BASE + 0xFFC)      /* 4 BYTES */
+
+#define PRCM_REQ_MB5        (_PRCMU_TCDM_BASE + 0xE44)    /* 4 bytes  */
+#define PRCM_ACK_MB5        (_PRCMU_TCDM_BASE + 0xDF4)    /* 4 bytes */
+
+/* Mailbox 5 Requests */
+#define PRCM_REQ_MB5_I2COPTYPE_REG     (PRCM_REQ_MB5 + 0x0)
+#define PRCM_REQ_MB5_BIT_FIELDS                (PRCM_REQ_MB5 + 0x1)
+#define PRCM_REQ_MB5_I2CSLAVE          (PRCM_REQ_MB5 + 0x2)
+#define PRCM_REQ_MB5_I2CVAL            (PRCM_REQ_MB5 + 0x3)
+
+/* Mailbox 5 ACKs */
+#define PRCM_ACK_MB5_STATUS    (PRCM_ACK_MB5 + 0x1)
+#define PRCM_ACK_MB5_SLAVE     (PRCM_ACK_MB5 + 0x2)
+#define PRCM_ACK_MB5_VAL       (PRCM_ACK_MB5 + 0x3)
+
+#define LOW_POWER_WAKEUP       1
+#define EXE_WAKEUP             0
+
+#define REQ_MB5                        5
+
+extern int prcmu_i2c_read(u8 reg, u16 slave);
+extern int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data);
+
+#endif /* __MACH_PRCMU_FW_V1_H */
diff --git a/board/st-ericsson/u8500/prcmu.c b/board/st-ericsson/u8500/prcmu.c
new file mode 100644 (file)
index 0000000..6f9302f
--- /dev/null
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson SA
+ *
+ * Adapted from the Linux version:
+ * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+/*
+ * NOTE: This currently does not support the I2C workaround access method.
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/types.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+
+#include "prcmu-fw.h"
+
+/* CPU mailbox registers */
+#define PRCM_MBOX_CPU_VAL (U8500_PRCMU_BASE + 0x0fc)
+#define PRCM_MBOX_CPU_SET (U8500_PRCMU_BASE + 0x100)
+#define PRCM_MBOX_CPU_CLR (U8500_PRCMU_BASE + 0x104)
+
+static int prcmu_is_ready(void)
+{
+       int ready = readb(PRCM_XP70_CUR_PWR_STATE) == AP_EXECUTE;
+       if (!ready)
+               printf("PRCMU firmware not ready\n");
+       return ready;
+}
+
+static int _wait_for_req_complete(int num)
+{
+       int timeout = 1000;
+
+       /* checking any already on-going transaction */
+       while ((readl(PRCM_MBOX_CPU_VAL) & (1 << num)) && timeout--)
+               ;
+
+       timeout = 1000;
+
+       /* Set an interrupt to XP70 */
+       writel(1 << num, PRCM_MBOX_CPU_SET);
+
+       while ((readl(PRCM_MBOX_CPU_VAL) & (1 << num)) && timeout--)
+               ;
+
+       if (!timeout) {
+               printf("PRCMU operation timed out\n");
+               return -1;
+       }
+
+       return 0;
+}
+
+/**
+ * prcmu_i2c_read - PRCMU - 4500 communication using PRCMU I2C
+ * @reg: - db8500 register bank to be accessed
+ * @slave:  - db8500 register to be accessed
+ * Returns: ACK_MB5  value containing the status
+ */
+int prcmu_i2c_read(u8 reg, u16 slave)
+{
+       uint8_t i2c_status;
+       uint8_t i2c_val;
+
+       if (!prcmu_is_ready())
+               return -1;
+
+       debug("\nprcmu_4500_i2c_read:bank=%x;reg=%x;\n",
+                       reg, slave);
+
+       /* prepare the data for mailbox 5 */
+       writeb((reg << 1) | I2CREAD, PRCM_REQ_MB5_I2COPTYPE_REG);
+       writeb((1 << 3) | 0x0, PRCM_REQ_MB5_BIT_FIELDS);
+       writeb(slave, PRCM_REQ_MB5_I2CSLAVE);
+       writeb(0, PRCM_REQ_MB5_I2CVAL);
+
+       _wait_for_req_complete(REQ_MB5);
+
+       /* retrieve values */
+       debug("ack-mb5:transfer status = %x\n",
+                       readb(PRCM_ACK_MB5_STATUS));
+       debug("ack-mb5:reg bank = %x\n", readb(PRCM_ACK_MB5) >> 1);
+       debug("ack-mb5:slave_add = %x\n",
+                       readb(PRCM_ACK_MB5_SLAVE));
+       debug("ack-mb5:reg_val = %d\n", readb(PRCM_ACK_MB5_VAL));
+
+       i2c_status = readb(PRCM_ACK_MB5_STATUS);
+       i2c_val = readb(PRCM_ACK_MB5_VAL);
+
+       if (i2c_status == I2C_RD_OK)
+               return i2c_val;
+       else {
+
+               printf("prcmu_i2c_read:read return status= %d\n",
+                               i2c_status);
+               return -1;
+       }
+
+}
+
+/**
+ * prcmu_i2c_write - PRCMU-db8500 communication using PRCMU I2C
+ * @reg: - db8500 register bank to be accessed
+ * @slave:  - db800 register to be written to
+ * @reg_data: - the data to write
+ * Returns: ACK_MB5 value containing the status
+ */
+int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data)
+{
+       uint8_t i2c_status;
+
+       if (!prcmu_is_ready())
+               return -1;
+
+       debug("\nprcmu_4500_i2c_write:bank=%x;reg=%x;\n",
+                       reg, slave);
+
+       /* prepare the data for mailbox 5 */
+       writeb((reg << 1) | I2CWRITE, PRCM_REQ_MB5_I2COPTYPE_REG);
+       writeb((1 << 3) | 0x0, PRCM_REQ_MB5_BIT_FIELDS);
+       writeb(slave, PRCM_REQ_MB5_I2CSLAVE);
+       writeb(reg_data, PRCM_REQ_MB5_I2CVAL);
+
+       debug("\ncpu_is_u8500v11\n");
+       _wait_for_req_complete(REQ_MB5);
+
+       /* retrieve values */
+       debug("ack-mb5:transfer status = %x\n",
+                       readb(PRCM_ACK_MB5_STATUS));
+       debug("ack-mb5:reg bank = %x\n", readb(PRCM_ACK_MB5) >> 1);
+       debug("ack-mb5:slave_add = %x\n",
+                       readb(PRCM_ACK_MB5_SLAVE));
+       debug("ack-mb5:reg_val = %d\n", readb(PRCM_ACK_MB5_VAL));
+
+       i2c_status = readb(PRCM_ACK_MB5_STATUS);
+       debug("\ni2c_status = %x\n", i2c_status);
+       if (i2c_status == I2C_WR_OK)
+               return 0;
+       else {
+               printf("ape-i2c: i2c_status : 0x%x\n", i2c_status);
+               return -1;
+       }
+}
diff --git a/board/st-ericsson/u8500/u8500_href.c b/board/st-ericsson/u8500/u8500_href.c
new file mode 100644 (file)
index 0000000..525633e
--- /dev/null
@@ -0,0 +1,546 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <i2c.h>
+#include <asm/types.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
+#ifdef CONFIG_MMC
+#include "../../../drivers/mmc/arm_pl180_mmci.h"
+#endif
+
+#define NOMADIK_PER4_BASE      (0x80150000)
+#define NOMADIK_BACKUPRAM0_BASE (NOMADIK_PER4_BASE + 0x00000)
+#define NOMADIK_BACKUPRAM1_BASE (NOMADIK_PER4_BASE + 0x01000)
+
+/* Power, Reset, Clock Management Unit */
+/*
+ * SVA: Smart Video Accelerator
+ * SIA: Smart Imaging Accelerator
+ * SGA: Smart Graphic accelerator
+ * B2R2: Graphic blitter
+ */
+#define PRCMU_BASE     CFG_PRCMU_BASE  /* 0x80157000 for U8500 */
+#define PRCM_ARMCLKFIX_MGT_REG         (PRCMU_BASE + 0x000)
+#define PRCM_ACLK_MGT_REG              (PRCMU_BASE + 0x004)
+#define PRCM_SVAMMDSPCLK_MGT_REG       (PRCMU_BASE + 0x008)
+#define PRCM_SIAMMDSPCLK_MGT_REG       (PRCMU_BASE + 0x00C)
+#define PRCM_SAAMMDSPCLK_MGT_REG       (PRCMU_BASE + 0x010)
+#define PRCM_SGACLK_MGT_REG            (PRCMU_BASE + 0x014)
+#define PRCM_UARTCLK_MGT_REG           (PRCMU_BASE + 0x018)
+#define PRCM_MSPCLK_MGT_REG            (PRCMU_BASE + 0x01C)
+#define PRCM_I2CCLK_MGT_REG            (PRCMU_BASE + 0x020)
+#define PRCM_SDMMCCLK_MGT_REG          (PRCMU_BASE + 0x024)
+#define PRCM_SLIMCLK_MGT_REG           (PRCMU_BASE + 0x028)
+#define PRCM_PER1CLK_MGT_REG           (PRCMU_BASE + 0x02C)
+#define PRCM_PER2CLK_MGT_REG           (PRCMU_BASE + 0x030)
+#define PRCM_PER3CLK_MGT_REG           (PRCMU_BASE + 0x034)
+#define PRCM_PER5CLK_MGT_REG           (PRCMU_BASE + 0x038)
+#define PRCM_PER6CLK_MGT_REG           (PRCMU_BASE + 0x03C)
+#define PRCM_PER7CLK_MGT_REG           (PRCMU_BASE + 0x040)
+#define PRCM_DMACLK_MGT_REG            (PRCMU_BASE + 0x074)
+#define PRCM_B2R2CLK_MGT_REG           (PRCMU_BASE + 0x078)
+
+#define PRCM_PLLSOC0_FREQ_REG          (PRCMU_BASE + 0x080)
+#define PRCM_PLLSOC1_FREQ_REG          (PRCMU_BASE + 0x084)
+#define PRCM_PLLARM_FREQ_REG           (PRCMU_BASE + 0x088)
+#define PRCM_PLLDDR_FREQ_REG           (PRCMU_BASE + 0x08C)
+#define PRCM_ARM_CHGCLKREQ_REG         (PRCMU_BASE + 0x114)
+
+#define PRCM_TCR                       (PRCMU_BASE + 0x1C8)
+
+/*
+ * Memory controller register
+ */
+#define DMC_BASE_ADDR                  0x80156000
+#define DMC_CTL_97                     (DMC_BASE_ADDR + 0x184)
+
+int board_id;  /* set in board_late_init() */
+
+/* PLLs for clock management registers */
+enum {
+       GATED = 0,
+       PLLSOC0,        /* pllsw = 001, ffs() = 1 */
+       PLLSOC1,        /* pllsw = 010, ffs() = 2 */
+       PLLDDR,         /* pllsw = 100, ffs() = 3 */
+       PLLARM,
+};
+
+static struct pll_freq_regs {
+       int idx;        /* index fror pll_name and pll_khz arrays */
+       uint32_t addr;
+} pll_freq_regs[] = {
+       {PLLSOC0, PRCM_PLLSOC0_FREQ_REG},
+       {PLLSOC1, PRCM_PLLSOC1_FREQ_REG},
+       {PLLDDR, PRCM_PLLDDR_FREQ_REG},
+       {PLLARM, PRCM_PLLARM_FREQ_REG},
+       {0, 0},
+};
+
+static const char *pll_name[5] = {"GATED", "SOC0", "SOC1", "DDR", "ARM"};
+static uint32_t pll_khz[5];    /* use ffs(pllsw(reg)) as index for 0..3 */
+
+static struct clk_mgt_regs {
+       uint32_t addr;
+       uint32_t val;
+       const char *descr;
+} clk_mgt_regs[] = {
+       /* register content taken from bootrom settings */
+       {PRCM_ARMCLKFIX_MGT_REG, 0x0120, "ARMCLKFIX"}, /* ena, SOC0/0, ??? */
+       {PRCM_ACLK_MGT_REG, 0x0125, "ACLK"},    /* ena, SOC0/5, 160 MHz */
+       {PRCM_SVAMMDSPCLK_MGT_REG, 0x1122, "SVA"}, /* ena, SOC0/2, 400 MHz */
+       {PRCM_SIAMMDSPCLK_MGT_REG, 0x0022, "SIA"}, /* dis, SOC0/2, 400 MHz */
+       {PRCM_SAAMMDSPCLK_MGT_REG, 0x0822, "SAA"}, /* dis, SOC0/4, 200 MHz */
+       {PRCM_SGACLK_MGT_REG, 0x0024, "SGA"},   /* dis, SOC0/4, 200 MHz */
+       {PRCM_UARTCLK_MGT_REG, 0x0300, "UART"}, /* ena, GATED, CLK38 */
+       {PRCM_MSPCLK_MGT_REG, 0x0200, "MSP"},   /* dis, GATED, CLK38 */
+       {PRCM_I2CCLK_MGT_REG, 0x0130, "I2C"},   /* ena, SOC0/16, 50 MHz */
+       {PRCM_SDMMCCLK_MGT_REG, 0x0130, "SDMMC"}, /* ena, SOC0/16, 50 MHz */
+       {PRCM_PER1CLK_MGT_REG, 0x126, "PER1"},  /* ena, SOC0/6, 133 MHz */
+       {PRCM_PER2CLK_MGT_REG, 0x126, "PER2"},  /* ena, SOC0/6, 133 MHz */
+       {PRCM_PER3CLK_MGT_REG, 0x126, "PER3"},  /* ena, SOC0/6, 133 MHz */
+       {PRCM_PER5CLK_MGT_REG, 0x126, "PER5"},  /* ena, SOC0/6, 133 MHz */
+       {PRCM_PER6CLK_MGT_REG, 0x126, "PER6"},  /* ena, SOC0/6, 133 MHz */
+       {PRCM_PER7CLK_MGT_REG, 0x128, "PER7"},  /* ena, SOC0/8, 100 MHz */
+       {PRCM_DMACLK_MGT_REG, 0x125, "DMA"},    /* ena, SOC0/5, 160 MHz */
+       {PRCM_B2R2CLK_MGT_REG, 0x025, "B2R2"},  /* dis, SOC0/5, 160 MHz */
+       {0, 0, NULL},
+};
+
+static void init_regs(void);
+
+DECLARE_GLOBAL_DATA_PTR;
+#if defined(CONFIG_SHOW_BOOT_PROGRESS)
+void show_boot_progress(int progress)
+{
+       printf("Boot reached stage %d\n", progress);
+}
+#endif
+
+static unsigned int read_asicid(void)
+{
+       unsigned int *address = (void *)U8500_BOOTROM_BASE
+                               + U8500_BOOTROM_ASIC_ID_OFFSET;
+       return readl(address);
+}
+
+int cpu_is_u8500v11(void)
+{
+       return read_asicid() == 0x008500A1;
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+int board_early_init_f(void)
+{
+       init_regs();
+       return 0;
+}
+
+int board_init(void)
+{
+       uint32_t unused_cols_rows;
+       unsigned int nrows;
+       unsigned int ncols;
+
+       gd->bd->bi_arch_number = 0x1A4;
+       gd->bd->bi_boot_params = 0x00000100;
+       gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+
+       /*
+        * Assumption: 2 CS active, both CS have same layout.
+        *             15 rows max, 11 cols max (controller spec).
+        *             memory chip has 8 banks, I/O width 32 bit.
+        * The correct way would be to read MR#8: I/O width and density,
+        * but this requires locking against the PRCMU firmware.
+        * Simplified approach:
+        * Read number of unused rows and columns from mem controller.
+        * size = nCS x 2^(rows+cols) x nbanks x buswidth_bytes
+        */
+       unused_cols_rows = readl(DMC_CTL_97);
+       nrows = 15 - (unused_cols_rows & 0x07);
+       ncols = 11 - ((unused_cols_rows & 0x0700) >> 8);
+       gd->bd->bi_dram[0].size = 2 * (1 << (nrows + ncols)) * 8 * 4;
+
+       icache_enable();
+
+       return 0;
+}
+
+int dram_init(void)
+{
+       gd->ram_size = PHYS_SDRAM_SIZE_1;
+
+       return 0;
+}
+
+unsigned int addr_vall_arr[] = {
+       0x8011F000, 0x0000FFFF, /* Clocks for HSI TODO: Enable reqd only */
+       0x8011F008, 0x00001CFF, /* Clocks for HSI TODO: Enable reqd only */
+       0x8000F000, 0x00007FFF, /* Clocks for I2C TODO: Enable reqd only */
+       0x8000F008, 0x00007FFF, /* Clocks for I2C TODO: Enable reqd only */
+       0x80157020, 0x00000150, /* I2C 48MHz clock */
+       0x8012F000, 0x00007FFF, /* Clocks for SD TODO: Enable reqd only */
+       0x8012F008, 0x00007FFF, /* Clocks for SD TODO: Enable reqd only */
+       0xA03DF000, 0x0000000D, /* Clock for MTU Timers */
+       0x8011E00C, 0x00000000, /* GPIO ALT FUNC for EMMC */
+       0x8011E004, 0x0000FFE0, /* GPIO ALT FUNC for EMMC */
+       0x8011E020, 0x0000FFE0, /* GPIO ALT FUNC for EMMC */
+       0x8011E024, 0x00000000, /* GPIO ALT FUNC for EMMC */
+       0x8012E000, 0x20000000, /* GPIO ALT FUNC for UART */
+       0x8012E00C, 0x00000000, /* GPIO ALT FUNC for SD */
+       0x8012E004, 0x0FFC0000, /* GPIO ALT FUNC for SD */
+       0x8012E020, 0x60000000, /* GPIO ALT FUNC for SD */
+       0x8012E024, 0x60000000, /* GPIO ALT FUNC for SD */
+       0x801571E4, 0x0000000C, /* PRCMU settings for B2R2,
+                                  PRCM_APE_RESETN_SET_REG */
+       0x80157024, 0x00000130, /* PRCMU settings for EMMC/SD */
+       0xA03FF000, 0x00000003, /* USB */
+       0xA03FF008, 0x00000001, /* USB */
+       0xA03FE00C, 0x00000000, /* USB */
+       0xA03FE020, 0x00000FFF, /* USB */
+       0xA03FE024, 0x00000000  /* USB */
+};
+
+#ifdef BOARD_LATE_INIT
+#ifdef CONFIG_MMC
+
+#define LDO_VAUX3_MASK         0x3
+#define LDO_VAUX3_ENABLE       0x1
+#define VAUX3_VOLTAGE_2_9V     0xd
+
+#define AB8500_REGU_CTRL2      0x4
+#define AB8500_REGU_VRF1VAUX3_REGU_REG 0x040A
+#define AB8500_REGU_VRF1VAUX3_SEL_REG  0x0421
+
+static int hrefplus_mmc_power_init(void)
+{
+       int ret;
+       int val;
+
+       if (!cpu_is_u8500v11())
+               return 0;
+
+       /*
+        * On v1.1 HREF boards (HREF+), Vaux3 needs to be enabled for the SD
+        * card to work.  This is done by enabling the regulators in the AB8500
+        * via PRCMU I2C transactions.
+        *
+        * This code is derived from the handling of AB8500_LDO_VAUX3 in
+        * ab8500_ldo_enable() and ab8500_ldo_disable() in Linux.
+        *
+        * Turn off and delay is required to have it work across soft reboots.
+        */
+
+       ret = prcmu_i2c_read(AB8500_REGU_CTRL2, AB8500_REGU_VRF1VAUX3_REGU_REG);
+       if (ret < 0)
+               goto out;
+
+       val = ret;
+
+       /* Turn off */
+       ret = prcmu_i2c_write(AB8500_REGU_CTRL2, AB8500_REGU_VRF1VAUX3_REGU_REG,
+                               val & ~LDO_VAUX3_MASK);
+       if (ret < 0)
+               goto out;
+
+       udelay(10 * 1000);
+
+       /* Set the voltage to 2.9V */
+       ret = prcmu_i2c_write(AB8500_REGU_CTRL2,
+                               AB8500_REGU_VRF1VAUX3_SEL_REG,
+                               VAUX3_VOLTAGE_2_9V);
+       if (ret < 0)
+               goto out;
+
+       val = val & ~LDO_VAUX3_MASK;
+       val = val | LDO_VAUX3_ENABLE;
+
+       /* Turn on the supply */
+       ret = prcmu_i2c_write(AB8500_REGU_CTRL2,
+                               AB8500_REGU_VRF1VAUX3_REGU_REG, val);
+
+out:
+       return ret;
+}
+#endif
+/*
+ * called after all initialisation were done, but before the generic
+ * mmc_initialize().
+ */
+int board_late_init(void)
+{
+       uchar byte;
+
+       /*
+        * Determine and set board_id environment variable
+        * 0: mop500, 1: href500
+        * Above boards have different GPIO expander chips which we can
+        * distinguish by the chip id.
+        *
+        * The board_id environment variable is needed for the Linux bootargs.
+        */
+       (void) i2c_set_bus_num(0);
+       (void) i2c_read(CONFIG_SYS_I2C_GPIOE_ADDR, 0x80, 1, &byte, 1);
+       if (byte == 0x01) {
+               board_id = 0;
+               setenv("board_id", "0");
+       } else {
+               board_id = 1;
+               setenv("board_id", "1");
+       }
+#ifdef CONFIG_MMC
+       hrefplus_mmc_power_init();
+
+       /*
+        * config extended GPIO pins for level shifter and
+        * SDMMC_ENABLE
+        */
+       if (board_id == 0) {
+               /* MOP500 */
+               byte = 0x0c;
+               (void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0x89, 1, &byte, 1);
+               (void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0x83, 1, &byte, 1);
+       } else {
+               /* HREF */
+               /* set the direction of GPIO KPY9 and KPY10 */
+               byte = 0x06;
+               (void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0xC8, 1, &byte, 1);
+               /* must be a multibyte access */
+               (void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0xC4, 1,
+                                               (uchar []) {0x06, 0x06}, 2);
+       }
+#endif /* CONFIG_MMC */
+       /*
+        * Create a memargs variable which points uses either the memargs256 or
+        * memargs512 environment variable, depending on the memory size.
+        * memargs is used to build the bootargs, memargs256 and memargs512 are
+        * stored in the environment.
+        */
+       if (gd->bd->bi_dram[0].size == 0x10000000) {
+               setenv("memargs", "setenv bootargs ${bootargs} ${memargs256}");
+               setenv("mem", "256M");
+       } else {
+               setenv("memargs", "setenv bootargs ${bootargs} ${memargs512}");
+               setenv("mem", "512M");
+       }
+
+       return 0;
+}
+#endif /* BOARD_LATE_INIT */
+
+static void early_gpio_setup(struct gpio_register *gpio_reg, u32 bits)
+{
+       writel(readl(&gpio_reg->gpio_dats) | bits, &gpio_reg->gpio_dats);
+       writel(readl(&gpio_reg->gpio_pdis) & ~bits, &gpio_reg->gpio_pdis);
+}
+
+static void init_regs(void)
+{
+       /* FIXME Remove magic register array settings for ED also */
+       struct prcmu *prcmu = (struct prcmu *) U8500_PRCMU_BASE;
+
+       /* Enable timers */
+       writel(1 << 17, &prcmu->tcr);
+
+       u8500_prcmu_enable(&prcmu->per1clk_mgt);
+       u8500_prcmu_enable(&prcmu->per2clk_mgt);
+       u8500_prcmu_enable(&prcmu->per3clk_mgt);
+       u8500_prcmu_enable(&prcmu->per5clk_mgt);
+       u8500_prcmu_enable(&prcmu->per6clk_mgt);
+       u8500_prcmu_enable(&prcmu->per7clk_mgt);
+
+       u8500_prcmu_enable(&prcmu->uartclk_mgt);
+       u8500_prcmu_enable(&prcmu->i2cclk_mgt);
+
+       u8500_prcmu_enable(&prcmu->sdmmcclk_mgt);
+
+       u8500_clock_enable(1, 9, -1);   /* GPIO0 */
+
+       u8500_clock_enable(2, 11, -1);  /* GPIO1 */
+
+       u8500_clock_enable(3, 8, -1);   /* GPIO2 */
+       u8500_clock_enable(5, 1, -1);   /* GPIO3 */
+
+       u8500_clock_enable(3, 6, 6);    /* UART2 */
+
+       gpio_altfuncenable(GPIO_ALT_I2C_0, "I2C0");
+       u8500_clock_enable(3, 3, 3);    /* I2C0 */
+
+       early_gpio_setup((struct gpio_register *)U8500_GPIO_0_BASE, 0x60000000);
+       gpio_altfuncenable(GPIO_ALT_UART_2, "UART2");
+
+       early_gpio_setup((struct gpio_register *)U8500_GPIO_6_BASE, 0x0000ffe0);
+       gpio_altfuncenable(GPIO_ALT_EMMC, "EMMC");
+
+       early_gpio_setup((struct gpio_register *)U8500_GPIO_0_BASE, 0x0000ffe0);
+       gpio_altfuncenable(GPIO_ALT_SD_CARD0, "SDCARD");
+
+       u8500_clock_enable(1, 5, 5);    /* SDI0 */
+       u8500_clock_enable(2, 4, 2);    /* SDI4 */
+
+       u8500_clock_enable(6, 7, -1);   /* MTU0 */
+       u8500_clock_enable(3, 4, 4);    /* SDI2 */
+
+       early_gpio_setup((struct gpio_register *)U8500_GPIO_4_BASE, 0x000007ff);
+       gpio_altfuncenable(GPIO_ALT_POP_EMMC, "EMMC");
+
+       /*
+        * Enabling clocks for all devices which are AMBA devices in the
+        * kernel.  Otherwise they will not get probe()'d because the
+        * peripheral ID register will not be powered.
+        */
+
+       /* XXX: some of these differ between ED/V1 */
+
+       u8500_clock_enable(1, 1, 1);    /* UART1 */
+       u8500_clock_enable(1, 0, 0);    /* UART0 */
+
+       u8500_clock_enable(3, 2, 2);    /* SSP1 */
+       u8500_clock_enable(3, 1, 1);    /* SSP0 */
+
+       u8500_clock_enable(2, 8, -1);   /* SPI0 */
+       u8500_clock_enable(2, 5, 3);    /* MSP2 */
+}
+
+#ifdef CONFIG_MMC
+static int u8500_mmci_board_init(void)
+{
+       enum gpio_error error;
+       struct gpio_register *gpio_base_address;
+
+       gpio_base_address = (void *)(U8500_GPIO_0_BASE);
+       gpio_base_address->gpio_dats |= 0xFFC0000;
+       gpio_base_address->gpio_pdis &= ~0xFFC0000;
+
+       /* save the GPIO0 AFSELA register */
+       error = gpio_altfuncenable(GPIO_ALT_SD_CARD0, "MMC");
+       if (error != GPIO_OK) {
+               printf("u8500_mmci_board_init() gpio_altfuncenable failed\n");
+               return -ENODEV;
+       }
+       return 0;
+}
+
+int board_mmc_init(bd_t *bd)
+{
+       if (u8500_mmci_board_init())
+               return -ENODEV;
+
+       if (arm_pl180_mmci_init())
+               return -ENODEV;
+       return 0;
+}
+#endif
+
+
+/*
+ * get_pll_freq_khz - return PLL frequency in kHz
+ */
+static uint32_t get_pll_freq_khz(uint32_t inclk_khz, uint32_t freq_reg)
+{
+       uint32_t idf, ldf, odf, seldiv, phi;
+
+       /*
+        * PLLOUTCLK = PHI = (INCLK*LDF)/(2*ODF*IDF) if SELDIV2=0
+        * PLLOUTCLK = PHI = (INCLK*LDF)/(4*ODF*IDF) if SELDIV2=1
+        * where:
+        * IDF=R(2:0) (when R=000, IDF=1d)
+        * LDF = 2*D(7:0) (D must be greater than or equal to 6)
+        * ODF = N(5:0) (when N=000000, 0DF=1d)
+        */
+
+       idf = (freq_reg & 0x70000) >> 16;
+       ldf = (freq_reg & 0xff) * 2;
+       odf = (freq_reg & 0x3f00) >> 8;
+       seldiv = (freq_reg & 0x01000000) >> 24;
+       phi = (inclk_khz * ldf) / (2 * odf * idf);
+       if (seldiv)
+               phi = phi/2;
+
+       return phi;
+}
+
+int do_clkinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+       uint32_t inclk_khz;
+       uint32_t reg, phi;
+       uint32_t clk_khz;
+       unsigned int clk_sel;
+       struct clk_mgt_regs *clks = clk_mgt_regs;
+       struct pll_freq_regs *plls = pll_freq_regs;
+
+       /*
+        * Go through list of PLLs.
+        * Initialise pll out frequency array (pll_khz) and print frequency.
+        */
+       inclk_khz = 38400;      /* 38.4 MHz */
+       while (plls->addr) {
+               reg = readl(plls->addr);
+               phi = get_pll_freq_khz(inclk_khz, reg);
+               pll_khz[plls->idx] = phi;
+               printf("%s PLL out frequency: %d.%d Mhz\n",
+                               pll_name[plls->idx], phi/1000, phi % 1000);
+               plls++;
+       }
+
+       /* check ARM clock source */
+       reg = readl(PRCM_ARM_CHGCLKREQ_REG);
+       printf("A9 running on %s\n",
+               (reg & 1) ?  "external clock" : "ARM PLL");
+
+       /* go through list of clk_mgt_reg */
+       printf("\n%19s %9s %7s %9s enabled\n",
+                       "name(addr)", "value", "PLL", "CLK[MHz]");
+       while (clks->addr) {
+               reg = readl(clks->addr);
+
+               /* convert bit position into array index */
+               clk_sel = ffs((reg >> 5) & 0x7);        /* PLLSW[2:0] */
+
+               if (reg & 0x200)
+                       clk_khz = 38400;        /* CLK38 is set */
+               else if ((reg & 0x1f) == 0)
+                       /* ARMCLKFIX_MGT is 0x120, e.g. div = 0 ! */
+                       clk_khz = 0;
+               else
+                       clk_khz = pll_khz[clk_sel] / (reg & 0x1f);
+
+               printf("%9s(%08x): %08x, %6s, %4d.%03d, %s\n",
+                       clks->descr, clks->addr, reg, pll_name[clk_sel],
+                       clk_khz / 1000, clk_khz % 1000,
+                       (reg & 0x100) ? "ena" : "dis");
+               clks++;
+       }
+
+       return 0;
+}
+
+U_BOOT_CMD(
+       clkinfo,        1,      1,      do_clkinfo,
+       "print clock info",
+       ""
+);
index ea5a850f145c28a38ea9ff30c714781fb966160b..d2cacc8c1c29aba4e940d575b1eae856ffe358d6 100644 (file)
@@ -154,6 +154,7 @@ s5pc210_universal            arm         armv7       universal_c210      samsung
 smdkv310                    arm         armv7       smdkv310            samsung        s5pc2xx
 harmony                      arm         armv7       harmony             nvidia         tegra2
 seaboard                     arm         armv7       seaboard            nvidia         tegra2
+u8500_href                   arm         armv7       u8500               st-ericsson    u8500
 actux1                       arm         ixp
 actux2                       arm         ixp
 actux3                       arm         ixp
diff --git a/include/configs/u8500_href.h b/include/configs/u8500_href.h
new file mode 100644 (file)
index 0000000..636922c
--- /dev/null
@@ -0,0 +1,245 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2009
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_U8500
+#define CONFIG_L2_OFF
+
+#define CONFIG_SYS_MEMTEST_START       0x00000000
+#define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF
+#define CONFIG_SYS_HZ          1000            /* must be 1000 */
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define BOARD_LATE_INIT
+
+/*
+ * Size of malloc() pool
+ */
+#ifdef CONFIG_BOOT_SRAM
+#define CONFIG_ENV_SIZE                (32*1024)
+#define CONFIG_SYS_MALLOC_LEN  (CONFIG_ENV_SIZE + 64*1024)
+#else
+#define CONFIG_ENV_SIZE                (128*1024)
+#define CONFIG_SYS_MALLOC_LEN  (CONFIG_ENV_SIZE + 256*1024)
+#endif
+#define CONFIG_SYS_GBL_DATA_SIZE       128     /* for initial data */
+
+/*
+ * PL011 Configuration
+ */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_SERIAL_RLCR
+#define CONFIG_PL011_SERIAL_FLUSH_ON_INIT
+
+/*
+ * U8500 UART registers base for 3 serial devices
+ */
+#define CFG_UART0_BASE         0x80120000
+#define CFG_UART1_BASE         0x80121000
+#define CFG_UART2_BASE         0x80007000
+#define CFG_SERIAL0            CFG_UART0_BASE
+#define CFG_SERIAL1            CFG_UART1_BASE
+#define CFG_SERIAL2            CFG_UART2_BASE
+#define CONFIG_PL011_CLOCK     38400000
+#define CONFIG_PL01x_PORTS     { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1, \
+                                 (void *)CFG_SERIAL2 }
+#define CONFIG_CONS_INDEX      2
+#define CONFIG_BAUDRATE                115200
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Devices and file systems
+ */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_DOS_PARTITION
+
+/*
+ * Commands
+ */
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_CONSOLE
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EMMC
+#define CONFIG_CMD_SOURCE
+#define CONFIG_CMD_I2C
+
+#ifndef CONFIG_BOOTDELAY
+#define CONFIG_BOOTDELAY       1
+#endif
+#define CONFIG_ZERO_BOOTDELAY_CHECK    /* check for keypress on bootdelay==0 */
+
+#undef CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND     "run emmcboot"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       "verify=n\0"                                                    \
+       "loadaddr=0x00100000\0"                                         \
+       "console=ttyAMA2,115200n8\0"                                    \
+       "memargs256=mem=96M@0 mem_modem=32M@96M mem=30M@128M "          \
+               "pmem=22M@158M pmem_hwb=44M@180M mem_mali=32@224M\0"    \
+       "memargs512=mem=96M@0 mem_modem=32M@96M mem=44M@128M "          \
+               "pmem=22M@172M mem=30M@194M mem_mali=32M@224M "         \
+               "pmem_hwb=54M@256M mem=202M@310M\0"                     \
+       "commonargs=setenv bootargs cachepolicy=writealloc noinitrd "   \
+               "init=init "                                            \
+               "board_id=${board_id} "                                 \
+               "logo.${logo} "                                         \
+               "startup_graphics=${startup_graphics}\0"                \
+       "emmcargs=setenv bootargs ${bootargs} "                         \
+               "root=/dev/mmcblk0p2 "                                  \
+               "rootdelay=1\0"                                         \
+       "addcons=setenv bootargs ${bootargs} "                          \
+               "console=${console}\0"                                  \
+       "emmcboot=echo Booting from eMMC ...; "                         \
+               "run commonargs emmcargs addcons memargs;"              \
+               "mmc read 0 ${loadaddr} 0xA0000 0x4000;"                \
+               "bootm ${loadaddr}\0"                                   \
+       "flash=mmc init 1;fatload mmc 1 ${loadaddr} flash.scr;"         \
+               "source ${loadaddr}\0"                                  \
+       "loaduimage=mmc init 1;fatload mmc 1 ${loadaddr} uImage\0"      \
+       "usbtty=cdc_acm\0"                                              \
+       "stdout=serial,usbtty\0"                                        \
+       "stdin=serial,usbtty\0"                                         \
+       "stderr=serial,usbtty\0"
+
+/*
+ * Miscellaneous configurable options
+ */
+
+#define CONFIG_SYS_LONGHELP                    /* undef to save memory     */
+#define CONFIG_SYS_PROMPT      "U8500 $ "      /* Monitor Command Prompt   */
+#define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size  */
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE \
+                                       + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS     32      /* max number of command args */
+#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */
+
+#undef CONFIG_SYS_CLKS_IN_HZ           /* everything, incl board info, in Hz */
+#define CONFIG_SYS_LOAD_ADDR           0x00100000 /* default load address */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE
+
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
+#define CONFIG_CMDLINE_EDITING
+
+#define CONFIG_SETUP_MEMORY_TAGS       2
+#define CONFIG_INITRD_TAG
+#define CONFIG_CMDLINE_TAG                     /* enable passing of ATAGs  */
+
+/*
+ * I2C
+ */
+#define CONFIG_U8500_I2C
+#undef CONFIG_HARD_I2C                 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C                 /* I2C bit-banged */
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C_SPEED           100000
+#define CONFIG_SYS_I2C_SLAVE           0       /* slave addr of controller */
+#define CONFIG_SYS_U8500_I2C0_BASE             0x80004000
+#define CONFIG_SYS_U8500_I2C1_BASE             0x80122000
+#define CONFIG_SYS_U8500_I2C2_BASE             0x80128000
+#define CONFIG_SYS_U8500_I2C3_BASE             0x80110000
+#define CONFIG_SYS_U8500_I2C_BUS_MAX           4
+
+#define CONFIG_SYS_I2C_GPIOE_ADDR      0x42    /* GPIO expander chip addr */
+#define CONFIG_TC35892_GPIO
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ           (4*1024)        /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ           (4*1024)        /* FIQ stack */
+#endif
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS           1
+#define PHYS_SDRAM_1                   0x00000000      /* DDR-SDRAM Bank #1 */
+#define PHYS_SDRAM_SIZE_1              0x20000000      /* 512 MB */
+
+/*
+ * additions for new relocation code
+ */
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_SIZE       0x100000
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_SDRAM_BASE + \
+                                        CONFIG_SYS_INIT_RAM_SIZE - \
+                                        GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_GBL_DATA_OFFSET
+
+/* landing address before relocation */
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE            0x0
+#endif
+
+/*
+ * MMC related configs
+ * NB Only externa SD slot is currently supported
+ */
+#define MMC_BLOCK_SIZE                 512
+#define CONFIG_ARM_PL180_MMCI
+#define CONFIG_ARM_PL180_MMCI_BASE     0x80126000      /* MMC base for 8500  */
+#define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000
+#define CONFIG_MMC_DEV_NUM             1
+
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_SAVEENV     /* CMD_ENV is obsolete but used in env_emmc.c */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET              0x13F80000
+#define CONFIG_SYS_MMC_ENV_DEV          0               /* SLOT2: eMMC */
+
+/*
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_NO_FLASH
+
+/*
+ * base register values for U8500
+ */
+#define CFG_PRCMU_BASE         0x80157000      /* Power, reset and clock
+                                                  management unit */
+#define CFG_FSMC_BASE          0x80000000      /* FSMC Controller */
+
+#endif /* __CONFIG_H */