[PATCH] USB: net2282 and net2280 software compatibility
authorGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Sun, 19 Mar 2006 19:49:14 +0000 (20:49 +0100)
committerGreg Kroah-Hartman <gregkh@suse.de>
Fri, 14 Apr 2006 18:12:19 +0000 (11:12 -0700)
Below is a patch to gadgets/net2280.[ch] which adds support for the
net2282 controller. The original code was kindly provided by PLX
Technology, I just merged it with the current net2280 driver in the
kernel. Tested on 2.6.15.6, but only with 2282. I did the merge, so
that the behaviour for the 2280 is unaffected (except for short delays
for extra checks).

Signed-off-by: G. Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Support for net2282 in net2280 driver.

drivers/usb/gadget/Kconfig
drivers/usb/gadget/net2280.c
drivers/usb/gadget/net2280.h

index d80f71877d684fbddb46fb6f322dec3e7766b3a3..363b2ad74ae60db025df978abe30aea313033cf3 100644 (file)
@@ -69,11 +69,11 @@ choice
           often need board-specific hooks.
 
 config USB_GADGET_NET2280
-       boolean "NetChip 2280"
+       boolean "NetChip 228x"
        depends on PCI
        select USB_GADGET_DUALSPEED
        help
-          NetChip 2280 is a PCI based USB peripheral controller which
+          NetChip 2280 / 2282 is a PCI based USB peripheral controller which
           supports both full and high speed USB 2.0 data transfers.  
           
           It has six configurable endpoints, as well as endpoint zero
index fb73dc100535c80d2e16de0ea68f62e533e5ab84..7682c07035bded7412de9f00201c3e5c36cb0b9a 100644 (file)
@@ -26,6 +26,8 @@
  * Copyright (C) 2003 David Brownell
  * Copyright (C) 2003-2005 PLX Technology, Inc.
  *
+ * Modified Seth Levy 2005 PLX Technology, Inc. to provide compatibility with 2282 chip
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -71,8 +73,8 @@
 #include <asm/unaligned.h>
 
 
-#define        DRIVER_DESC             "PLX NET2280 USB Peripheral Controller"
-#define        DRIVER_VERSION          "2005 Feb 03"
+#define        DRIVER_DESC             "PLX NET228x USB Peripheral Controller"
+#define        DRIVER_VERSION          "2005 Sept 27"
 
 #define        DMA_ADDR_INVALID        (~(dma_addr_t)0)
 #define        EP_DONTUSE              13      /* nonzero */
@@ -118,7 +120,7 @@ module_param (fifo_mode, ushort, 0644);
 /* enable_suspend -- When enabled, the driver will respond to
  * USB suspend requests by powering down the NET2280.  Otherwise,
  * USB suspend requests will be ignored.  This is acceptible for
- * self-powered devices, and helps avoid some quirks.
+ * self-powered devices
  */
 static int enable_suspend = 0;
 
@@ -223,6 +225,11 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
        ep->is_in = (tmp & USB_DIR_IN) != 0;
        if (!ep->is_in)
                writel ((1 << SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp);
+       else if (dev->pdev->device != 0x2280) {
+               /* Added for 2282, Don't use nak packets on an in endpoint, this was ignored on 2280 */
+               writel ((1 << CLEAR_NAK_OUT_PACKETS)
+                       | (1 << CLEAR_NAK_OUT_PACKETS_MODE), &ep->regs->ep_rsp);
+       }
 
        writel (tmp, &ep->regs->ep_cfg);
 
@@ -232,8 +239,9 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
                writel (tmp, &dev->regs->pciirqenb0);
 
                tmp = (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE)
-                       | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE)
-                       | readl (&ep->regs->ep_irqenb);
+                       | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE);
+               if (dev->pdev->device == 0x2280)
+                       tmp |= readl (&ep->regs->ep_irqenb);
                writel (tmp, &ep->regs->ep_irqenb);
        } else {                                /* dma, per-request */
                tmp = (1 << (8 + ep->num));     /* completion */
@@ -314,10 +322,18 @@ static void ep_reset (struct net2280_regs __iomem *regs, struct net2280_ep *ep)
        /* init to our chosen defaults, notably so that we NAK OUT
         * packets until the driver queues a read (+note erratum 0112)
         */
-       tmp = (1 << SET_NAK_OUT_PACKETS_MODE)
+       if (!ep->is_in || ep->dev->pdev->device == 0x2280) {
+               tmp = (1 << SET_NAK_OUT_PACKETS_MODE)
                | (1 << SET_NAK_OUT_PACKETS)
                | (1 << CLEAR_EP_HIDE_STATUS_PHASE)
                | (1 << CLEAR_INTERRUPT_MODE);
+       } else {
+               /* added for 2282 */
+               tmp = (1 << CLEAR_NAK_OUT_PACKETS_MODE)
+               | (1 << CLEAR_NAK_OUT_PACKETS)
+               | (1 << CLEAR_EP_HIDE_STATUS_PHASE)
+               | (1 << CLEAR_INTERRUPT_MODE);
+       }
 
        if (ep->num != 0) {
                tmp |= (1 << CLEAR_ENDPOINT_TOGGLE)
@@ -326,14 +342,18 @@ static void ep_reset (struct net2280_regs __iomem *regs, struct net2280_ep *ep)
        writel (tmp, &ep->regs->ep_rsp);
 
        /* scrub most status bits, and flush any fifo state */
-       writel (  (1 << TIMEOUT)
+       if (ep->dev->pdev->device == 0x2280)
+               tmp = (1 << FIFO_OVERFLOW)
+                       | (1 << FIFO_UNDERFLOW);
+       else
+               tmp = 0;
+
+       writel (tmp | (1 << TIMEOUT)
                | (1 << USB_STALL_SENT)
                | (1 << USB_IN_NAK_SENT)
                | (1 << USB_IN_ACK_RCVD)
                | (1 << USB_OUT_PING_NAK_SENT)
                | (1 << USB_OUT_ACK_SENT)
-               | (1 << FIFO_OVERFLOW)
-               | (1 << FIFO_UNDERFLOW)
                | (1 << FIFO_FLUSH)
                | (1 << SHORT_PACKET_OUT_DONE_INTERRUPT)
                | (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)
@@ -718,7 +738,7 @@ fill_dma_desc (struct net2280_ep *ep, struct net2280_request *req, int valid)
         */
        if (ep->is_in)
                dmacount |= (1 << DMA_DIRECTION);
-       else if ((dmacount % ep->ep.maxpacket) != 0)
+       if ((!ep->is_in && (dmacount % ep->ep.maxpacket) != 0) || ep->dev->pdev->device != 0x2280)
                dmacount |= (1 << END_OF_CHAIN);
 
        req->valid = valid;
@@ -760,9 +780,12 @@ static inline void stop_dma (struct net2280_dma_regs __iomem *dma)
 static void start_queue (struct net2280_ep *ep, u32 dmactl, u32 td_dma)
 {
        struct net2280_dma_regs __iomem *dma = ep->dma;
+       unsigned int tmp = (1 << VALID_BIT) | (ep->is_in << DMA_DIRECTION);
 
-       writel ((1 << VALID_BIT) | (ep->is_in << DMA_DIRECTION),
-                       &dma->dmacount);
+       if (ep->dev->pdev->device != 0x2280)
+               tmp |= (1 << END_OF_CHAIN);
+
+       writel (tmp, &dma->dmacount);
        writel (readl (&dma->dmastat), &dma->dmastat);
 
        writel (td_dma, &dma->dmadesc);
@@ -2110,7 +2133,11 @@ static void handle_ep_small (struct net2280_ep *ep)
        VDEBUG (ep->dev, "%s ack ep_stat %08x, req %p\n",
                        ep->ep.name, t, req ? &req->req : 0);
 #endif
-       writel (t & ~(1 << NAK_OUT_PACKETS), &ep->regs->ep_stat);
+       if (!ep->is_in || ep->dev->pdev->device == 0x2280)
+               writel (t & ~(1 << NAK_OUT_PACKETS), &ep->regs->ep_stat);
+       else
+               /* Added for 2282 */
+               writel (t, &ep->regs->ep_stat);
 
        /* for ep0, monitor token irqs to catch data stage length errors
         * and to synchronize on status.
@@ -2337,7 +2364,7 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
                        u32                     raw [2];
                        struct usb_ctrlrequest  r;
                } u;
-               int                             tmp = 0;
+               int                             tmp;
                struct net2280_request          *req;
 
                if (dev->gadget.speed == USB_SPEED_UNKNOWN) {
@@ -2364,14 +2391,19 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
                }
                ep->stopped = 0;
                dev->protocol_stall = 0;
-               writel (  (1 << TIMEOUT)
+
+               if (ep->dev->pdev->device == 0x2280)
+                       tmp = (1 << FIFO_OVERFLOW)
+                               | (1 << FIFO_UNDERFLOW);
+               else
+                       tmp = 0;
+
+               writel (tmp | (1 << TIMEOUT)
                        | (1 << USB_STALL_SENT)
                        | (1 << USB_IN_NAK_SENT)
                        | (1 << USB_IN_ACK_RCVD)
                        | (1 << USB_OUT_PING_NAK_SENT)
                        | (1 << USB_OUT_ACK_SENT)
-                       | (1 << FIFO_OVERFLOW)
-                       | (1 << FIFO_UNDERFLOW)
                        | (1 << SHORT_PACKET_OUT_DONE_INTERRUPT)
                        | (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)
                        | (1 << DATA_PACKET_RECEIVED_INTERRUPT)
@@ -2385,6 +2417,8 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
                cpu_to_le32s (&u.raw [0]);
                cpu_to_le32s (&u.raw [1]);
 
+               tmp = 0;
+
 #define        w_value         le16_to_cpup (&u.r.wValue)
 #define        w_index         le16_to_cpup (&u.r.wIndex)
 #define        w_length        le16_to_cpup (&u.r.wLength)
@@ -2594,10 +2628,17 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat)
                writel (stat, &dev->regs->irqstat1);
 
        /* some status we can just ignore */
-       stat &= ~((1 << CONTROL_STATUS_INTERRUPT)
-                       | (1 << SUSPEND_REQUEST_INTERRUPT)
-                       | (1 << RESUME_INTERRUPT)
-                       | (1 << SOF_INTERRUPT));
+       if (dev->pdev->device == 0x2280)
+               stat &= ~((1 << CONTROL_STATUS_INTERRUPT)
+                         | (1 << SUSPEND_REQUEST_INTERRUPT)
+                         | (1 << RESUME_INTERRUPT)
+                         | (1 << SOF_INTERRUPT));
+       else
+               stat &= ~((1 << CONTROL_STATUS_INTERRUPT)
+                         | (1 << RESUME_INTERRUPT)
+                         | (1 << SOF_DOWN_INTERRUPT)
+                         | (1 << SOF_INTERRUPT));
+
        if (!stat)
                return;
        // DEBUG (dev, "irqstat1 %08x\n", stat);
@@ -2939,6 +2980,13 @@ static struct pci_device_id pci_ids [] = { {
        .device =       0x2280,
        .subvendor =    PCI_ANY_ID,
        .subdevice =    PCI_ANY_ID,
+}, {
+       .class =        ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
+       .class_mask =   ~0,
+       .vendor =       0x17cc,
+       .device =       0x2282,
+       .subvendor =    PCI_ANY_ID,
+       .subdevice =    PCI_ANY_ID,
 
 }, { /* end: all zeroes */ }
 };
index fff4509cf340d2d62c20bb91bd5fb136086d14da..e195abec8d7f5f5ca2b89b67f437cdf0dfec395c 100644 (file)
@@ -179,6 +179,7 @@ struct net2280_regs {
 #define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT                 19
 #define     PCI_RETRY_ABORT_INTERRUPT                           17
 #define     PCI_MASTER_CYCLE_DONE_INTERRUPT                     16
+#define     SOF_DOWN_INTERRUPT                                  14
 #define     GPIO_INTERRUPT                                      13
 #define     DMA_D_INTERRUPT                                     12
 #define     DMA_C_INTERRUPT                                     11
@@ -346,6 +347,7 @@ struct net2280_dma_regs {   /* [11.7] */
 #define     DMA_ENABLE                                          1
 #define     DMA_ADDRESS_HOLD                                    0
        u32             dmastat;
+#define     DMA_ABORT_DONE_INTERRUPT                            27
 #define     DMA_SCATTER_GATHER_DONE_INTERRUPT                   25
 #define     DMA_TRANSACTION_DONE_INTERRUPT                      24
 #define     DMA_ABORT                                           1