#define HV_M_STATUS_SPEED_1000 0x0200
#define HV_M_STATUS_LINK_UP 0x0040
+#define E1000_ICH_FWSM_PCIM2PCI 0x01000000 /* ME PCIm-to-PCI active */
+#define E1000_ICH_FWSM_PCIM2PCI_COUNT 2000
+
/* Time to wait before putting the device into D3 if there's no link (in ms). */
#define LINK_TIMEOUT 100
#define FLAG2_DISABLE_AIM (1 << 8)
#define FLAG2_CHECK_PHY_HANG (1 << 9)
#define FLAG2_NO_DISABLE_RX (1 << 10)
+#define FLAG2_PCIM2PCI_ARBITER_WA (1 << 11)
#define E1000_RX_DESC_PS(R, i) \
(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
#define HV_PM_CTRL PHY_REG(770, 17)
/* PHY Low Power Idle Control */
-#define I82579_LPI_CTRL PHY_REG(772, 20)
-#define I82579_LPI_CTRL_ENABLE_MASK 0x6000
+#define I82579_LPI_CTRL PHY_REG(772, 20)
+#define I82579_LPI_CTRL_ENABLE_MASK 0x6000
+#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80
/* EMI Registers */
#define I82579_EMI_ADDR 0x10
#define HV_KMRN_MODE_CTRL PHY_REG(769, 16)
#define HV_KMRN_MDIO_SLOW 0x0400
+/* KMRN FIFO Control and Status */
+#define HV_KMRN_FIFO_CTRLSTA PHY_REG(770, 16)
+#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK 0x7000
+#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT 12
+
/* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
/* Offset 04h HSFSTS */
union ich8_hws_flash_status {
struct e1000_mac_info *mac = &hw->mac;
s32 ret_val;
bool link;
+ u16 phy_reg;
/*
* We only want to go out to the PHY registers to see if Auto-Neg
mac->get_link_status = false;
- if (hw->phy.type == e1000_phy_82578) {
- ret_val = e1000_link_stall_workaround_hv(hw);
- if (ret_val)
- goto out;
- }
-
- if (hw->mac.type == e1000_pch2lan) {
+ switch (hw->mac.type) {
+ case e1000_pch2lan:
ret_val = e1000_k1_workaround_lv(hw);
if (ret_val)
goto out;
+ /* fall-thru */
+ case e1000_pchlan:
+ if (hw->phy.type == e1000_phy_82578) {
+ ret_val = e1000_link_stall_workaround_hv(hw);
+ if (ret_val)
+ goto out;
+ }
+
+ /*
+ * Workaround for PCHx parts in half-duplex:
+ * Set the number of preambles removed from the packet
+ * when it is passed from the PHY to the MAC to prevent
+ * the MAC from misinterpreting the packet type.
+ */
+ e1e_rphy(hw, HV_KMRN_FIFO_CTRLSTA, &phy_reg);
+ phy_reg &= ~HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK;
+
+ if ((er32(STATUS) & E1000_STATUS_FD) != E1000_STATUS_FD)
+ phy_reg |= (1 << HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT);
+
+ e1e_wphy(hw, HV_KMRN_FIFO_CTRLSTA, phy_reg);
+ break;
+ default:
+ break;
}
/*
(adapter->hw.phy.type == e1000_phy_igp_3))
adapter->flags |= FLAG_LSC_GIG_SPEED_DROP;
+ /* Enable workaround for 82579 w/ ME enabled */
+ if ((adapter->hw.mac.type == e1000_pch2lan) &&
+ (er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
+ adapter->flags2 |= FLAG2_PCIM2PCI_ARBITER_WA;
+
/* Disable EEE by default until IEEE802.3az spec is finalized */
if (adapter->flags2 & FLAG2_HAS_EEE)
adapter->hw.dev_spec.ich8lan.eee_disable = true;
return ret_val;
/* Preamble tuning for SSC */
- ret_val = e1e_wphy(hw, PHY_REG(770, 16), 0xA204);
+ ret_val = e1e_wphy(hw, HV_KMRN_FIFO_CTRLSTA, 0xA204);
if (ret_val)
return ret_val;
}
s32 ret_val = 0;
u16 status_reg = 0;
u32 mac_reg;
+ u16 phy_reg;
if (hw->mac.type != e1000_pch2lan)
goto out;
mac_reg = er32(FEXTNVM4);
mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK;
- if (status_reg & HV_M_STATUS_SPEED_1000)
+ ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg);
+ if (ret_val)
+ goto out;
+
+ if (status_reg & HV_M_STATUS_SPEED_1000) {
mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC;
- else
+ phy_reg &= ~I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT;
+ } else {
mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_16USEC;
-
+ phy_reg |= I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT;
+ }
ew32(FEXTNVM4, mac_reg);
+ ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg);
}
out:
adapter->hw_csum_good++;
}
+/**
+ * e1000e_update_tail_wa - helper function for e1000e_update_[rt]dt_wa()
+ * @hw: pointer to the HW structure
+ * @tail: address of tail descriptor register
+ * @i: value to write to tail descriptor register
+ *
+ * When updating the tail register, the ME could be accessing Host CSR
+ * registers at the same time. Normally, this is handled in h/w by an
+ * arbiter but on some parts there is a bug that acknowledges Host accesses
+ * later than it should which could result in the descriptor register to
+ * have an incorrect value. Workaround this by checking the FWSM register
+ * which has bit 24 set while ME is accessing Host CSR registers, wait
+ * if it is set and try again a number of times.
+ **/
+static inline s32 e1000e_update_tail_wa(struct e1000_hw *hw, u8 __iomem * tail,
+ unsigned int i)
+{
+ unsigned int j = 0;
+
+ while ((j++ < E1000_ICH_FWSM_PCIM2PCI_COUNT) &&
+ (er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI))
+ udelay(50);
+
+ writel(i, tail);
+
+ if ((j == E1000_ICH_FWSM_PCIM2PCI_COUNT) && (i != readl(tail)))
+ return E1000_ERR_SWFW_SYNC;
+
+ return 0;
+}
+
+static void e1000e_update_rdt_wa(struct e1000_adapter *adapter, unsigned int i)
+{
+ u8 __iomem *tail = (adapter->hw.hw_addr + adapter->rx_ring->tail);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (e1000e_update_tail_wa(hw, tail, i)) {
+ u32 rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ e_err("ME firmware caused invalid RDT - resetting\n");
+ schedule_work(&adapter->reset_task);
+ }
+}
+
+static void e1000e_update_tdt_wa(struct e1000_adapter *adapter, unsigned int i)
+{
+ u8 __iomem *tail = (adapter->hw.hw_addr + adapter->tx_ring->tail);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (e1000e_update_tail_wa(hw, tail, i)) {
+ u32 tctl = er32(TCTL);
+ ew32(TCTL, tctl & ~E1000_TCTL_EN);
+ e_err("ME firmware caused invalid TDT - resetting\n");
+ schedule_work(&adapter->reset_task);
+ }
+}
+
/**
* e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
* @adapter: address of board private structure
* such as IA-64).
*/
wmb();
- writel(i, adapter->hw.hw_addr + rx_ring->tail);
+ if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+ e1000e_update_rdt_wa(adapter, i);
+ else
+ writel(i, adapter->hw.hw_addr + rx_ring->tail);
}
i++;
if (i == rx_ring->count)
* such as IA-64).
*/
wmb();
- writel(i << 1, adapter->hw.hw_addr + rx_ring->tail);
+ if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+ e1000e_update_rdt_wa(adapter, i << 1);
+ else
+ writel(i << 1,
+ adapter->hw.hw_addr + rx_ring->tail);
}
i++;
* applicable for weak-ordered memory model archs,
* such as IA-64). */
wmb();
- writel(i, adapter->hw.hw_addr + rx_ring->tail);
+ if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+ e1000e_update_rdt_wa(adapter, i);
+ else
+ writel(i, adapter->hw.hw_addr + rx_ring->tail);
}
}
wmb();
tx_ring->next_to_use = i;
- writel(i, adapter->hw.hw_addr + tx_ring->tail);
+
+ if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+ e1000e_update_tdt_wa(adapter, i);
+ else
+ writel(i, adapter->hw.hw_addr + tx_ring->tail);
+
/*
* we need this if more than one processor can write to our tail
* at a time, it synchronizes IO on IA64/Altix systems
if (ixgbe_rx_is_fcoe(adapter, rx_desc)) {
ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb,
staterr);
- if (!ddp_bytes)
+ if (!ddp_bytes) {
+ dev_kfree_skb_any(skb);
goto next_desc;
+ }
}
#endif /* IXGBE_FCOE */
ixgbe_receive_skb(q_vector, skb, staterr, rx_ring, rx_desc);
projects / linux-drm-fsl-dcu.git / commitdiff