#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb_gadget.h>
#include <linux/usb.h>
#include <linux/usb/otg.h>
#include <linux/stat.h>
#include <linux/timer.h>
#include <linux/types.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/workqueue.h>
#include "usbatm.h"
#include <linux/interrupt.h>
#include <linux/proc_fs.h>
#include <linux/clk.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb_gadget.h>
#include <asm/byteorder.h>
#include <linux/string.h>
#include <linux/device.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb_gadget.h>
#include <linux/ctype.h>
#include <linux/string.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb_gadget.h>
#include "gadget_chips.h"
#include <asm/uaccess.h>
#include <asm/unaligned.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb/cdc.h>
#include <linux/usb_gadget.h>
#include <linux/freezer.h>
#include <linux/utsname.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb_gadget.h>
#include "gadget_chips.h"
#include <sound/initval.h>
#include <sound/rawmidi.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb_gadget.h>
#include <linux/usb/audio.h>
#include <linux/usb/midi.h>
#include <linux/interrupt.h>
#include <linux/proc_fs.h>
#include <linux/device.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb_gadget.h>
#include <asm/byteorder.h>
#include <asm/unaligned.h>
#include <asm/hardware.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb_gadget.h>
/*
#include <linux/interrupt.h>
#include <linux/moduleparam.h>
#include <linux/device.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb_gadget.h>
#include <asm/byteorder.h>
#include <linux/mm.h>
#include <linux/moduleparam.h>
#include <linux/platform_device.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb_gadget.h>
#include <linux/usb/otg.h>
#include <linux/dma-mapping.h>
#include <asm/arch/pxa-regs.h>
#endif
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb_gadget.h>
#include <asm/arch/udc.h>
#include <asm/unaligned.h>
#include <asm/uaccess.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb/cdc.h>
#include <linux/usb_gadget.h>
#include <linux/device.h>
#include <linux/init.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb_gadget.h>
#include <asm/unaligned.h>
#include <asm/system.h>
#include <asm/unaligned.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb_gadget.h>
#include "gadget_chips.h"
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/module.h>
-#include <linux/usb_ch9.h>
#include <linux/usb/input.h>
#include "usb.h"
#include "onetouch.h"
header-y += netfilter_bridge/
header-y += netfilter_ipv4/
header-y += netfilter_ipv6/
+header-y += usb/
header-y += affs_hardblocks.h
header-y += aio_abi.h
unifdef-y += uinput.h
unifdef-y += uio.h
unifdef-y += unistd.h
-unifdef-y += usb_ch9.h
unifdef-y += usbdevice_fs.h
unifdef-y += user.h
unifdef-y += utsname.h
#define __LINUX_USB_H
#include <linux/mod_devicetable.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#define USB_MAJOR 180
#define USB_DEVICE_MAJOR 189
--- /dev/null
+unifdef-y += audio.h
+unifdef-y += cdc.h
+unifdef-y += ch9.h
+unifdef-y += midi.h
+
--- /dev/null
+/*
+ * This file holds USB constants and structures that are needed for USB
+ * device APIs. These are used by the USB device model, which is defined
+ * in chapter 9 of the USB 2.0 specification. Linux has several APIs in C
+ * that need these:
+ *
+ * - the master/host side Linux-USB kernel driver API;
+ * - the "usbfs" user space API; and
+ * - the Linux "gadget" slave/device/peripheral side driver API.
+ *
+ * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems
+ * act either as a USB master/host or as a USB slave/device. That means
+ * the master and slave side APIs benefit from working well together.
+ *
+ * There's also "Wireless USB", using low power short range radios for
+ * peripheral interconnection but otherwise building on the USB framework.
+ */
+
+#ifndef __LINUX_USB_CH9_H
+#define __LINUX_USB_CH9_H
+
+#include <linux/types.h> /* __u8 etc */
+
+/*-------------------------------------------------------------------------*/
+
+/* CONTROL REQUEST SUPPORT */
+
+/*
+ * USB directions
+ *
+ * This bit flag is used in endpoint descriptors' bEndpointAddress field.
+ * It's also one of three fields in control requests bRequestType.
+ */
+#define USB_DIR_OUT 0 /* to device */
+#define USB_DIR_IN 0x80 /* to host */
+
+/*
+ * USB types, the second of three bRequestType fields
+ */
+#define USB_TYPE_MASK (0x03 << 5)
+#define USB_TYPE_STANDARD (0x00 << 5)
+#define USB_TYPE_CLASS (0x01 << 5)
+#define USB_TYPE_VENDOR (0x02 << 5)
+#define USB_TYPE_RESERVED (0x03 << 5)
+
+/*
+ * USB recipients, the third of three bRequestType fields
+ */
+#define USB_RECIP_MASK 0x1f
+#define USB_RECIP_DEVICE 0x00
+#define USB_RECIP_INTERFACE 0x01
+#define USB_RECIP_ENDPOINT 0x02
+#define USB_RECIP_OTHER 0x03
+/* From Wireless USB 1.0 */
+#define USB_RECIP_PORT 0x04
+#define USB_RECIP_RPIPE 0x05
+
+/*
+ * Standard requests, for the bRequest field of a SETUP packet.
+ *
+ * These are qualified by the bRequestType field, so that for example
+ * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved
+ * by a GET_STATUS request.
+ */
+#define USB_REQ_GET_STATUS 0x00
+#define USB_REQ_CLEAR_FEATURE 0x01
+#define USB_REQ_SET_FEATURE 0x03
+#define USB_REQ_SET_ADDRESS 0x05
+#define USB_REQ_GET_DESCRIPTOR 0x06
+#define USB_REQ_SET_DESCRIPTOR 0x07
+#define USB_REQ_GET_CONFIGURATION 0x08
+#define USB_REQ_SET_CONFIGURATION 0x09
+#define USB_REQ_GET_INTERFACE 0x0A
+#define USB_REQ_SET_INTERFACE 0x0B
+#define USB_REQ_SYNCH_FRAME 0x0C
+
+#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */
+#define USB_REQ_GET_ENCRYPTION 0x0E
+#define USB_REQ_RPIPE_ABORT 0x0E
+#define USB_REQ_SET_HANDSHAKE 0x0F
+#define USB_REQ_RPIPE_RESET 0x0F
+#define USB_REQ_GET_HANDSHAKE 0x10
+#define USB_REQ_SET_CONNECTION 0x11
+#define USB_REQ_SET_SECURITY_DATA 0x12
+#define USB_REQ_GET_SECURITY_DATA 0x13
+#define USB_REQ_SET_WUSB_DATA 0x14
+#define USB_REQ_LOOPBACK_DATA_WRITE 0x15
+#define USB_REQ_LOOPBACK_DATA_READ 0x16
+#define USB_REQ_SET_INTERFACE_DS 0x17
+
+/*
+ * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and
+ * are read as a bit array returned by USB_REQ_GET_STATUS. (So there
+ * are at most sixteen features of each type.)
+ */
+#define USB_DEVICE_SELF_POWERED 0 /* (read only) */
+#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */
+#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */
+#define USB_DEVICE_BATTERY 2 /* (wireless) */
+#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */
+#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/
+#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */
+#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */
+#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */
+
+#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */
+
+
+/**
+ * struct usb_ctrlrequest - SETUP data for a USB device control request
+ * @bRequestType: matches the USB bmRequestType field
+ * @bRequest: matches the USB bRequest field
+ * @wValue: matches the USB wValue field (le16 byte order)
+ * @wIndex: matches the USB wIndex field (le16 byte order)
+ * @wLength: matches the USB wLength field (le16 byte order)
+ *
+ * This structure is used to send control requests to a USB device. It matches
+ * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the
+ * USB spec for a fuller description of the different fields, and what they are
+ * used for.
+ *
+ * Note that the driver for any interface can issue control requests.
+ * For most devices, interfaces don't coordinate with each other, so
+ * such requests may be made at any time.
+ */
+struct usb_ctrlrequest {
+ __u8 bRequestType;
+ __u8 bRequest;
+ __le16 wValue;
+ __le16 wIndex;
+ __le16 wLength;
+} __attribute__ ((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or
+ * (rarely) accepted by SET_DESCRIPTOR.
+ *
+ * Note that all multi-byte values here are encoded in little endian
+ * byte order "on the wire". But when exposed through Linux-USB APIs,
+ * they've been converted to cpu byte order.
+ */
+
+/*
+ * Descriptor types ... USB 2.0 spec table 9.5
+ */
+#define USB_DT_DEVICE 0x01
+#define USB_DT_CONFIG 0x02
+#define USB_DT_STRING 0x03
+#define USB_DT_INTERFACE 0x04
+#define USB_DT_ENDPOINT 0x05
+#define USB_DT_DEVICE_QUALIFIER 0x06
+#define USB_DT_OTHER_SPEED_CONFIG 0x07
+#define USB_DT_INTERFACE_POWER 0x08
+/* these are from a minor usb 2.0 revision (ECN) */
+#define USB_DT_OTG 0x09
+#define USB_DT_DEBUG 0x0a
+#define USB_DT_INTERFACE_ASSOCIATION 0x0b
+/* these are from the Wireless USB spec */
+#define USB_DT_SECURITY 0x0c
+#define USB_DT_KEY 0x0d
+#define USB_DT_ENCRYPTION_TYPE 0x0e
+#define USB_DT_BOS 0x0f
+#define USB_DT_DEVICE_CAPABILITY 0x10
+#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11
+#define USB_DT_WIRE_ADAPTER 0x21
+#define USB_DT_RPIPE 0x22
+
+/* conventional codes for class-specific descriptors */
+#define USB_DT_CS_DEVICE 0x21
+#define USB_DT_CS_CONFIG 0x22
+#define USB_DT_CS_STRING 0x23
+#define USB_DT_CS_INTERFACE 0x24
+#define USB_DT_CS_ENDPOINT 0x25
+
+/* All standard descriptors have these 2 fields at the beginning */
+struct usb_descriptor_header {
+ __u8 bLength;
+ __u8 bDescriptorType;
+} __attribute__ ((packed));
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEVICE: Device descriptor */
+struct usb_device_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 bcdUSB;
+ __u8 bDeviceClass;
+ __u8 bDeviceSubClass;
+ __u8 bDeviceProtocol;
+ __u8 bMaxPacketSize0;
+ __le16 idVendor;
+ __le16 idProduct;
+ __le16 bcdDevice;
+ __u8 iManufacturer;
+ __u8 iProduct;
+ __u8 iSerialNumber;
+ __u8 bNumConfigurations;
+} __attribute__ ((packed));
+
+#define USB_DT_DEVICE_SIZE 18
+
+
+/*
+ * Device and/or Interface Class codes
+ * as found in bDeviceClass or bInterfaceClass
+ * and defined by www.usb.org documents
+ */
+#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */
+#define USB_CLASS_AUDIO 1
+#define USB_CLASS_COMM 2
+#define USB_CLASS_HID 3
+#define USB_CLASS_PHYSICAL 5
+#define USB_CLASS_STILL_IMAGE 6
+#define USB_CLASS_PRINTER 7
+#define USB_CLASS_MASS_STORAGE 8
+#define USB_CLASS_HUB 9
+#define USB_CLASS_CDC_DATA 0x0a
+#define USB_CLASS_CSCID 0x0b /* chip+ smart card */
+#define USB_CLASS_CONTENT_SEC 0x0d /* content security */
+#define USB_CLASS_VIDEO 0x0e
+#define USB_CLASS_WIRELESS_CONTROLLER 0xe0
+#define USB_CLASS_APP_SPEC 0xfe
+#define USB_CLASS_VENDOR_SPEC 0xff
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_CONFIG: Configuration descriptor information.
+ *
+ * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the
+ * descriptor type is different. Highspeed-capable devices can look
+ * different depending on what speed they're currently running. Only
+ * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG
+ * descriptors.
+ */
+struct usb_config_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 wTotalLength;
+ __u8 bNumInterfaces;
+ __u8 bConfigurationValue;
+ __u8 iConfiguration;
+ __u8 bmAttributes;
+ __u8 bMaxPower;
+} __attribute__ ((packed));
+
+#define USB_DT_CONFIG_SIZE 9
+
+/* from config descriptor bmAttributes */
+#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */
+#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */
+#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */
+#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_STRING: String descriptor */
+struct usb_string_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 wData[1]; /* UTF-16LE encoded */
+} __attribute__ ((packed));
+
+/* note that "string" zero is special, it holds language codes that
+ * the device supports, not Unicode characters.
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_INTERFACE: Interface descriptor */
+struct usb_interface_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bInterfaceNumber;
+ __u8 bAlternateSetting;
+ __u8 bNumEndpoints;
+ __u8 bInterfaceClass;
+ __u8 bInterfaceSubClass;
+ __u8 bInterfaceProtocol;
+ __u8 iInterface;
+} __attribute__ ((packed));
+
+#define USB_DT_INTERFACE_SIZE 9
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_ENDPOINT: Endpoint descriptor */
+struct usb_endpoint_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bEndpointAddress;
+ __u8 bmAttributes;
+ __le16 wMaxPacketSize;
+ __u8 bInterval;
+
+ /* NOTE: these two are _only_ in audio endpoints. */
+ /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */
+ __u8 bRefresh;
+ __u8 bSynchAddress;
+} __attribute__ ((packed));
+
+#define USB_DT_ENDPOINT_SIZE 7
+#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */
+
+
+/*
+ * Endpoints
+ */
+#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */
+#define USB_ENDPOINT_DIR_MASK 0x80
+
+#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */
+#define USB_ENDPOINT_XFER_CONTROL 0
+#define USB_ENDPOINT_XFER_ISOC 1
+#define USB_ENDPOINT_XFER_BULK 2
+#define USB_ENDPOINT_XFER_INT 3
+#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */
+struct usb_qualifier_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 bcdUSB;
+ __u8 bDeviceClass;
+ __u8 bDeviceSubClass;
+ __u8 bDeviceProtocol;
+ __u8 bMaxPacketSize0;
+ __u8 bNumConfigurations;
+ __u8 bRESERVED;
+} __attribute__ ((packed));
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_OTG (from OTG 1.0a supplement) */
+struct usb_otg_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bmAttributes; /* support for HNP, SRP, etc */
+} __attribute__ ((packed));
+
+/* from usb_otg_descriptor.bmAttributes */
+#define USB_OTG_SRP (1 << 0)
+#define USB_OTG_HNP (1 << 1) /* swap host/device roles */
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */
+struct usb_debug_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ /* bulk endpoints with 8 byte maxpacket */
+ __u8 bDebugInEndpoint;
+ __u8 bDebugOutEndpoint;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */
+struct usb_interface_assoc_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bFirstInterface;
+ __u8 bInterfaceCount;
+ __u8 bFunctionClass;
+ __u8 bFunctionSubClass;
+ __u8 bFunctionProtocol;
+ __u8 iFunction;
+} __attribute__ ((packed));
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_SECURITY: group of wireless security descriptors, including
+ * encryption types available for setting up a CC/association.
+ */
+struct usb_security_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 wTotalLength;
+ __u8 bNumEncryptionTypes;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys
+ * may be retrieved.
+ */
+struct usb_key_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 tTKID[3];
+ __u8 bReserved;
+ __u8 bKeyData[0];
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */
+struct usb_encryption_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bEncryptionType;
+#define USB_ENC_TYPE_UNSECURE 0
+#define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */
+#define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */
+#define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */
+ __u8 bEncryptionValue; /* use in SET_ENCRYPTION */
+ __u8 bAuthKeyIndex;
+};
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_BOS: group of wireless capabilities */
+struct usb_bos_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 wTotalLength;
+ __u8 bNumDeviceCaps;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */
+struct usb_dev_cap_header {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+};
+
+#define USB_CAP_TYPE_WIRELESS_USB 1
+
+struct usb_wireless_cap_descriptor { /* Ultra Wide Band */
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+
+ __u8 bmAttributes;
+#define USB_WIRELESS_P2P_DRD (1 << 1)
+#define USB_WIRELESS_BEACON_MASK (3 << 2)
+#define USB_WIRELESS_BEACON_SELF (1 << 2)
+#define USB_WIRELESS_BEACON_DIRECTED (2 << 2)
+#define USB_WIRELESS_BEACON_NONE (3 << 2)
+ __le16 wPHYRates; /* bit rates, Mbps */
+#define USB_WIRELESS_PHY_53 (1 << 0) /* always set */
+#define USB_WIRELESS_PHY_80 (1 << 1)
+#define USB_WIRELESS_PHY_107 (1 << 2) /* always set */
+#define USB_WIRELESS_PHY_160 (1 << 3)
+#define USB_WIRELESS_PHY_200 (1 << 4) /* always set */
+#define USB_WIRELESS_PHY_320 (1 << 5)
+#define USB_WIRELESS_PHY_400 (1 << 6)
+#define USB_WIRELESS_PHY_480 (1 << 7)
+ __u8 bmTFITXPowerInfo; /* TFI power levels */
+ __u8 bmFFITXPowerInfo; /* FFI power levels */
+ __le16 bmBandGroup;
+ __u8 bReserved;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with
+ * each endpoint descriptor for a wireless device
+ */
+struct usb_wireless_ep_comp_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bMaxBurst;
+ __u8 bMaxSequence;
+ __le16 wMaxStreamDelay;
+ __le16 wOverTheAirPacketSize;
+ __u8 bOverTheAirInterval;
+ __u8 bmCompAttributes;
+#define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */
+#define USB_ENDPOINT_SWITCH_NO 0
+#define USB_ENDPOINT_SWITCH_SWITCH 1
+#define USB_ENDPOINT_SWITCH_SCALE 2
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless
+ * host and a device for connection set up, mutual authentication, and
+ * exchanging short lived session keys. The handshake depends on a CC.
+ */
+struct usb_handshake {
+ __u8 bMessageNumber;
+ __u8 bStatus;
+ __u8 tTKID[3];
+ __u8 bReserved;
+ __u8 CDID[16];
+ __u8 nonce[16];
+ __u8 MIC[8];
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC).
+ * A CC may also be set up using non-wireless secure channels (including
+ * wired USB!), and some devices may support CCs with multiple hosts.
+ */
+struct usb_connection_context {
+ __u8 CHID[16]; /* persistent host id */
+ __u8 CDID[16]; /* device id (unique w/in host context) */
+ __u8 CK[16]; /* connection key */
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB 2.0 defines three speeds, here's how Linux identifies them */
+
+enum usb_device_speed {
+ USB_SPEED_UNKNOWN = 0, /* enumerating */
+ USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */
+ USB_SPEED_HIGH, /* usb 2.0 */
+ USB_SPEED_VARIABLE, /* wireless (usb 2.5) */
+};
+
+enum usb_device_state {
+ /* NOTATTACHED isn't in the USB spec, and this state acts
+ * the same as ATTACHED ... but it's clearer this way.
+ */
+ USB_STATE_NOTATTACHED = 0,
+
+ /* chapter 9 and authentication (wireless) device states */
+ USB_STATE_ATTACHED,
+ USB_STATE_POWERED, /* wired */
+ USB_STATE_UNAUTHENTICATED, /* auth */
+ USB_STATE_RECONNECTING, /* auth */
+ USB_STATE_DEFAULT, /* limited function */
+ USB_STATE_ADDRESS,
+ USB_STATE_CONFIGURED, /* most functions */
+
+ USB_STATE_SUSPENDED
+
+ /* NOTE: there are actually four different SUSPENDED
+ * states, returning to POWERED, DEFAULT, ADDRESS, or
+ * CONFIGURED respectively when SOF tokens flow again.
+ */
+};
+
+#endif /* __LINUX_USB_CH9_H */
+++ /dev/null
-/*
- * This file holds USB constants and structures that are needed for USB
- * device APIs. These are used by the USB device model, which is defined
- * in chapter 9 of the USB 2.0 specification. Linux has several APIs in C
- * that need these:
- *
- * - the master/host side Linux-USB kernel driver API;
- * - the "usbfs" user space API; and
- * - the Linux "gadget" slave/device/peripheral side driver API.
- *
- * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems
- * act either as a USB master/host or as a USB slave/device. That means
- * the master and slave side APIs benefit from working well together.
- *
- * There's also "Wireless USB", using low power short range radios for
- * peripheral interconnection but otherwise building on the USB framework.
- */
-
-#ifndef __LINUX_USB_CH9_H
-#define __LINUX_USB_CH9_H
-
-#include <linux/types.h> /* __u8 etc */
-
-/*-------------------------------------------------------------------------*/
-
-/* CONTROL REQUEST SUPPORT */
-
-/*
- * USB directions
- *
- * This bit flag is used in endpoint descriptors' bEndpointAddress field.
- * It's also one of three fields in control requests bRequestType.
- */
-#define USB_DIR_OUT 0 /* to device */
-#define USB_DIR_IN 0x80 /* to host */
-
-/*
- * USB types, the second of three bRequestType fields
- */
-#define USB_TYPE_MASK (0x03 << 5)
-#define USB_TYPE_STANDARD (0x00 << 5)
-#define USB_TYPE_CLASS (0x01 << 5)
-#define USB_TYPE_VENDOR (0x02 << 5)
-#define USB_TYPE_RESERVED (0x03 << 5)
-
-/*
- * USB recipients, the third of three bRequestType fields
- */
-#define USB_RECIP_MASK 0x1f
-#define USB_RECIP_DEVICE 0x00
-#define USB_RECIP_INTERFACE 0x01
-#define USB_RECIP_ENDPOINT 0x02
-#define USB_RECIP_OTHER 0x03
-/* From Wireless USB 1.0 */
-#define USB_RECIP_PORT 0x04
-#define USB_RECIP_RPIPE 0x05
-
-/*
- * Standard requests, for the bRequest field of a SETUP packet.
- *
- * These are qualified by the bRequestType field, so that for example
- * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved
- * by a GET_STATUS request.
- */
-#define USB_REQ_GET_STATUS 0x00
-#define USB_REQ_CLEAR_FEATURE 0x01
-#define USB_REQ_SET_FEATURE 0x03
-#define USB_REQ_SET_ADDRESS 0x05
-#define USB_REQ_GET_DESCRIPTOR 0x06
-#define USB_REQ_SET_DESCRIPTOR 0x07
-#define USB_REQ_GET_CONFIGURATION 0x08
-#define USB_REQ_SET_CONFIGURATION 0x09
-#define USB_REQ_GET_INTERFACE 0x0A
-#define USB_REQ_SET_INTERFACE 0x0B
-#define USB_REQ_SYNCH_FRAME 0x0C
-
-#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */
-#define USB_REQ_GET_ENCRYPTION 0x0E
-#define USB_REQ_RPIPE_ABORT 0x0E
-#define USB_REQ_SET_HANDSHAKE 0x0F
-#define USB_REQ_RPIPE_RESET 0x0F
-#define USB_REQ_GET_HANDSHAKE 0x10
-#define USB_REQ_SET_CONNECTION 0x11
-#define USB_REQ_SET_SECURITY_DATA 0x12
-#define USB_REQ_GET_SECURITY_DATA 0x13
-#define USB_REQ_SET_WUSB_DATA 0x14
-#define USB_REQ_LOOPBACK_DATA_WRITE 0x15
-#define USB_REQ_LOOPBACK_DATA_READ 0x16
-#define USB_REQ_SET_INTERFACE_DS 0x17
-
-/*
- * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and
- * are read as a bit array returned by USB_REQ_GET_STATUS. (So there
- * are at most sixteen features of each type.)
- */
-#define USB_DEVICE_SELF_POWERED 0 /* (read only) */
-#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */
-#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */
-#define USB_DEVICE_BATTERY 2 /* (wireless) */
-#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */
-#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/
-#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */
-#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */
-#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */
-
-#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */
-
-
-/**
- * struct usb_ctrlrequest - SETUP data for a USB device control request
- * @bRequestType: matches the USB bmRequestType field
- * @bRequest: matches the USB bRequest field
- * @wValue: matches the USB wValue field (le16 byte order)
- * @wIndex: matches the USB wIndex field (le16 byte order)
- * @wLength: matches the USB wLength field (le16 byte order)
- *
- * This structure is used to send control requests to a USB device. It matches
- * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the
- * USB spec for a fuller description of the different fields, and what they are
- * used for.
- *
- * Note that the driver for any interface can issue control requests.
- * For most devices, interfaces don't coordinate with each other, so
- * such requests may be made at any time.
- */
-struct usb_ctrlrequest {
- __u8 bRequestType;
- __u8 bRequest;
- __le16 wValue;
- __le16 wIndex;
- __le16 wLength;
-} __attribute__ ((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or
- * (rarely) accepted by SET_DESCRIPTOR.
- *
- * Note that all multi-byte values here are encoded in little endian
- * byte order "on the wire". But when exposed through Linux-USB APIs,
- * they've been converted to cpu byte order.
- */
-
-/*
- * Descriptor types ... USB 2.0 spec table 9.5
- */
-#define USB_DT_DEVICE 0x01
-#define USB_DT_CONFIG 0x02
-#define USB_DT_STRING 0x03
-#define USB_DT_INTERFACE 0x04
-#define USB_DT_ENDPOINT 0x05
-#define USB_DT_DEVICE_QUALIFIER 0x06
-#define USB_DT_OTHER_SPEED_CONFIG 0x07
-#define USB_DT_INTERFACE_POWER 0x08
-/* these are from a minor usb 2.0 revision (ECN) */
-#define USB_DT_OTG 0x09
-#define USB_DT_DEBUG 0x0a
-#define USB_DT_INTERFACE_ASSOCIATION 0x0b
-/* these are from the Wireless USB spec */
-#define USB_DT_SECURITY 0x0c
-#define USB_DT_KEY 0x0d
-#define USB_DT_ENCRYPTION_TYPE 0x0e
-#define USB_DT_BOS 0x0f
-#define USB_DT_DEVICE_CAPABILITY 0x10
-#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11
-#define USB_DT_WIRE_ADAPTER 0x21
-#define USB_DT_RPIPE 0x22
-
-/* conventional codes for class-specific descriptors */
-#define USB_DT_CS_DEVICE 0x21
-#define USB_DT_CS_CONFIG 0x22
-#define USB_DT_CS_STRING 0x23
-#define USB_DT_CS_INTERFACE 0x24
-#define USB_DT_CS_ENDPOINT 0x25
-
-/* All standard descriptors have these 2 fields at the beginning */
-struct usb_descriptor_header {
- __u8 bLength;
- __u8 bDescriptorType;
-} __attribute__ ((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEVICE: Device descriptor */
-struct usb_device_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 bcdUSB;
- __u8 bDeviceClass;
- __u8 bDeviceSubClass;
- __u8 bDeviceProtocol;
- __u8 bMaxPacketSize0;
- __le16 idVendor;
- __le16 idProduct;
- __le16 bcdDevice;
- __u8 iManufacturer;
- __u8 iProduct;
- __u8 iSerialNumber;
- __u8 bNumConfigurations;
-} __attribute__ ((packed));
-
-#define USB_DT_DEVICE_SIZE 18
-
-
-/*
- * Device and/or Interface Class codes
- * as found in bDeviceClass or bInterfaceClass
- * and defined by www.usb.org documents
- */
-#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */
-#define USB_CLASS_AUDIO 1
-#define USB_CLASS_COMM 2
-#define USB_CLASS_HID 3
-#define USB_CLASS_PHYSICAL 5
-#define USB_CLASS_STILL_IMAGE 6
-#define USB_CLASS_PRINTER 7
-#define USB_CLASS_MASS_STORAGE 8
-#define USB_CLASS_HUB 9
-#define USB_CLASS_CDC_DATA 0x0a
-#define USB_CLASS_CSCID 0x0b /* chip+ smart card */
-#define USB_CLASS_CONTENT_SEC 0x0d /* content security */
-#define USB_CLASS_VIDEO 0x0e
-#define USB_CLASS_WIRELESS_CONTROLLER 0xe0
-#define USB_CLASS_APP_SPEC 0xfe
-#define USB_CLASS_VENDOR_SPEC 0xff
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_CONFIG: Configuration descriptor information.
- *
- * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the
- * descriptor type is different. Highspeed-capable devices can look
- * different depending on what speed they're currently running. Only
- * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG
- * descriptors.
- */
-struct usb_config_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 wTotalLength;
- __u8 bNumInterfaces;
- __u8 bConfigurationValue;
- __u8 iConfiguration;
- __u8 bmAttributes;
- __u8 bMaxPower;
-} __attribute__ ((packed));
-
-#define USB_DT_CONFIG_SIZE 9
-
-/* from config descriptor bmAttributes */
-#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */
-#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */
-#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */
-#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_STRING: String descriptor */
-struct usb_string_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 wData[1]; /* UTF-16LE encoded */
-} __attribute__ ((packed));
-
-/* note that "string" zero is special, it holds language codes that
- * the device supports, not Unicode characters.
- */
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_INTERFACE: Interface descriptor */
-struct usb_interface_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bInterfaceNumber;
- __u8 bAlternateSetting;
- __u8 bNumEndpoints;
- __u8 bInterfaceClass;
- __u8 bInterfaceSubClass;
- __u8 bInterfaceProtocol;
- __u8 iInterface;
-} __attribute__ ((packed));
-
-#define USB_DT_INTERFACE_SIZE 9
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_ENDPOINT: Endpoint descriptor */
-struct usb_endpoint_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bEndpointAddress;
- __u8 bmAttributes;
- __le16 wMaxPacketSize;
- __u8 bInterval;
-
- /* NOTE: these two are _only_ in audio endpoints. */
- /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */
- __u8 bRefresh;
- __u8 bSynchAddress;
-} __attribute__ ((packed));
-
-#define USB_DT_ENDPOINT_SIZE 7
-#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */
-
-
-/*
- * Endpoints
- */
-#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */
-#define USB_ENDPOINT_DIR_MASK 0x80
-
-#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */
-#define USB_ENDPOINT_XFER_CONTROL 0
-#define USB_ENDPOINT_XFER_ISOC 1
-#define USB_ENDPOINT_XFER_BULK 2
-#define USB_ENDPOINT_XFER_INT 3
-#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */
-struct usb_qualifier_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 bcdUSB;
- __u8 bDeviceClass;
- __u8 bDeviceSubClass;
- __u8 bDeviceProtocol;
- __u8 bMaxPacketSize0;
- __u8 bNumConfigurations;
- __u8 bRESERVED;
-} __attribute__ ((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_OTG (from OTG 1.0a supplement) */
-struct usb_otg_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bmAttributes; /* support for HNP, SRP, etc */
-} __attribute__ ((packed));
-
-/* from usb_otg_descriptor.bmAttributes */
-#define USB_OTG_SRP (1 << 0)
-#define USB_OTG_HNP (1 << 1) /* swap host/device roles */
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */
-struct usb_debug_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- /* bulk endpoints with 8 byte maxpacket */
- __u8 bDebugInEndpoint;
- __u8 bDebugOutEndpoint;
-};
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */
-struct usb_interface_assoc_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bFirstInterface;
- __u8 bInterfaceCount;
- __u8 bFunctionClass;
- __u8 bFunctionSubClass;
- __u8 bFunctionProtocol;
- __u8 iFunction;
-} __attribute__ ((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_SECURITY: group of wireless security descriptors, including
- * encryption types available for setting up a CC/association.
- */
-struct usb_security_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 wTotalLength;
- __u8 bNumEncryptionTypes;
-};
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys
- * may be retrieved.
- */
-struct usb_key_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 tTKID[3];
- __u8 bReserved;
- __u8 bKeyData[0];
-};
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */
-struct usb_encryption_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bEncryptionType;
-#define USB_ENC_TYPE_UNSECURE 0
-#define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */
-#define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */
-#define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */
- __u8 bEncryptionValue; /* use in SET_ENCRYPTION */
- __u8 bAuthKeyIndex;
-};
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_BOS: group of wireless capabilities */
-struct usb_bos_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 wTotalLength;
- __u8 bNumDeviceCaps;
-};
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */
-struct usb_dev_cap_header {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDevCapabilityType;
-};
-
-#define USB_CAP_TYPE_WIRELESS_USB 1
-
-struct usb_wireless_cap_descriptor { /* Ultra Wide Band */
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDevCapabilityType;
-
- __u8 bmAttributes;
-#define USB_WIRELESS_P2P_DRD (1 << 1)
-#define USB_WIRELESS_BEACON_MASK (3 << 2)
-#define USB_WIRELESS_BEACON_SELF (1 << 2)
-#define USB_WIRELESS_BEACON_DIRECTED (2 << 2)
-#define USB_WIRELESS_BEACON_NONE (3 << 2)
- __le16 wPHYRates; /* bit rates, Mbps */
-#define USB_WIRELESS_PHY_53 (1 << 0) /* always set */
-#define USB_WIRELESS_PHY_80 (1 << 1)
-#define USB_WIRELESS_PHY_107 (1 << 2) /* always set */
-#define USB_WIRELESS_PHY_160 (1 << 3)
-#define USB_WIRELESS_PHY_200 (1 << 4) /* always set */
-#define USB_WIRELESS_PHY_320 (1 << 5)
-#define USB_WIRELESS_PHY_400 (1 << 6)
-#define USB_WIRELESS_PHY_480 (1 << 7)
- __u8 bmTFITXPowerInfo; /* TFI power levels */
- __u8 bmFFITXPowerInfo; /* FFI power levels */
- __le16 bmBandGroup;
- __u8 bReserved;
-};
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with
- * each endpoint descriptor for a wireless device
- */
-struct usb_wireless_ep_comp_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bMaxBurst;
- __u8 bMaxSequence;
- __le16 wMaxStreamDelay;
- __le16 wOverTheAirPacketSize;
- __u8 bOverTheAirInterval;
- __u8 bmCompAttributes;
-#define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */
-#define USB_ENDPOINT_SWITCH_NO 0
-#define USB_ENDPOINT_SWITCH_SWITCH 1
-#define USB_ENDPOINT_SWITCH_SCALE 2
-};
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless
- * host and a device for connection set up, mutual authentication, and
- * exchanging short lived session keys. The handshake depends on a CC.
- */
-struct usb_handshake {
- __u8 bMessageNumber;
- __u8 bStatus;
- __u8 tTKID[3];
- __u8 bReserved;
- __u8 CDID[16];
- __u8 nonce[16];
- __u8 MIC[8];
-};
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC).
- * A CC may also be set up using non-wireless secure channels (including
- * wired USB!), and some devices may support CCs with multiple hosts.
- */
-struct usb_connection_context {
- __u8 CHID[16]; /* persistent host id */
- __u8 CDID[16]; /* device id (unique w/in host context) */
- __u8 CK[16]; /* connection key */
-};
-
-/*-------------------------------------------------------------------------*/
-
-/* USB 2.0 defines three speeds, here's how Linux identifies them */
-
-enum usb_device_speed {
- USB_SPEED_UNKNOWN = 0, /* enumerating */
- USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */
- USB_SPEED_HIGH, /* usb 2.0 */
- USB_SPEED_VARIABLE, /* wireless (usb 2.5) */
-};
-
-enum usb_device_state {
- /* NOTATTACHED isn't in the USB spec, and this state acts
- * the same as ATTACHED ... but it's clearer this way.
- */
- USB_STATE_NOTATTACHED = 0,
-
- /* chapter 9 and authentication (wireless) device states */
- USB_STATE_ATTACHED,
- USB_STATE_POWERED, /* wired */
- USB_STATE_UNAUTHENTICATED, /* auth */
- USB_STATE_RECONNECTING, /* auth */
- USB_STATE_DEFAULT, /* limited function */
- USB_STATE_ADDRESS,
- USB_STATE_CONFIGURED, /* most functions */
-
- USB_STATE_SUSPENDED
-
- /* NOTE: there are actually four different SUSPENDED
- * states, returning to POWERED, DEFAULT, ADDRESS, or
- * CONFIGURED respectively when SOF tokens flow again.
- */
-};
-
-#endif /* __LINUX_USB_CH9_H */
#include <asm/types.h>
#include <asm/ioctl.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
/*
* Filesystem based user-mode API to USB Gadget controller hardware
projects / linux-drm-fsl-dcu.git / commitdiff