[TG3]: Fix Phy loopback.
authorMichael Chan <mchan@broadcom.com>
Thu, 7 Dec 2006 08:19:40 +0000 (00:19 -0800)
committerDavid S. Miller <davem@davemloft.net>
Thu, 7 Dec 2006 08:19:40 +0000 (00:19 -0800)
Phy loopback on most 10/100 devices need to be run in 1Gbps mode in
GMII mode.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/tg3.c

index d9123c9adc1e347d796af84b87f5cd2487fc54fd..e6561c1d85d69939b980830c2eea4df3a2e154a3 100644 (file)
@@ -8781,17 +8781,20 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
                                        tg3_writephy(tp, 0x10, phy & ~0x4000);
                                tg3_writephy(tp, MII_TG3_EPHY_TEST, phytest);
                        }
-               }
-               val = BMCR_LOOPBACK | BMCR_FULLDPLX;
-               if (tp->tg3_flags & TG3_FLAG_10_100_ONLY)
-                       val |= BMCR_SPEED100;
-               else
-                       val |= BMCR_SPEED1000;
+                       val = BMCR_LOOPBACK | BMCR_FULLDPLX | BMCR_SPEED100;
+               } else
+                       val = BMCR_LOOPBACK | BMCR_FULLDPLX | BMCR_SPEED1000;
 
                tg3_writephy(tp, MII_BMCR, val);
                udelay(40);
-               if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
+
+               mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) |
+                          MAC_MODE_LINK_POLARITY;
+               if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
                        tg3_writephy(tp, MII_TG3_EPHY_PTEST, 0x1800);
+                       mac_mode |= MAC_MODE_PORT_MODE_MII;
+               } else
+                       mac_mode |= MAC_MODE_PORT_MODE_GMII;
 
                /* reset to prevent losing 1st rx packet intermittently */
                if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES) {
@@ -8799,12 +8802,6 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
                        udelay(10);
                        tw32_f(MAC_RX_MODE, tp->rx_mode);
                }
-               mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) |
-                          MAC_MODE_LINK_POLARITY;
-               if (tp->tg3_flags & TG3_FLAG_10_100_ONLY)
-                       mac_mode |= MAC_MODE_PORT_MODE_MII;
-               else
-                       mac_mode |= MAC_MODE_PORT_MODE_GMII;
                if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401) {
                        mac_mode &= ~MAC_MODE_LINK_POLARITY;
                        tg3_writephy(tp, MII_TG3_EXT_CTRL,