#include <linux/highmem.h>
#include <linux/delay.h>
#include <linux/slab.h>
-
-#include <linux/spi/dw_spi.h>
#include <linux/spi/spi.h>
+#include "dw_spi.h"
+
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
#endif
--- /dev/null
+#ifndef DW_SPI_HEADER_H
+#define DW_SPI_HEADER_H
+
+#include <linux/io.h>
+#include <linux/scatterlist.h>
+
+/* Bit fields in CTRLR0 */
+#define SPI_DFS_OFFSET 0
+
+#define SPI_FRF_OFFSET 4
+#define SPI_FRF_SPI 0x0
+#define SPI_FRF_SSP 0x1
+#define SPI_FRF_MICROWIRE 0x2
+#define SPI_FRF_RESV 0x3
+
+#define SPI_MODE_OFFSET 6
+#define SPI_SCPH_OFFSET 6
+#define SPI_SCOL_OFFSET 7
+
+#define SPI_TMOD_OFFSET 8
+#define SPI_TMOD_MASK (0x3 << SPI_TMOD_OFFSET)
+#define SPI_TMOD_TR 0x0 /* xmit & recv */
+#define SPI_TMOD_TO 0x1 /* xmit only */
+#define SPI_TMOD_RO 0x2 /* recv only */
+#define SPI_TMOD_EPROMREAD 0x3 /* eeprom read mode */
+
+#define SPI_SLVOE_OFFSET 10
+#define SPI_SRL_OFFSET 11
+#define SPI_CFS_OFFSET 12
+
+/* Bit fields in SR, 7 bits */
+#define SR_MASK 0x7f /* cover 7 bits */
+#define SR_BUSY (1 << 0)
+#define SR_TF_NOT_FULL (1 << 1)
+#define SR_TF_EMPT (1 << 2)
+#define SR_RF_NOT_EMPT (1 << 3)
+#define SR_RF_FULL (1 << 4)
+#define SR_TX_ERR (1 << 5)
+#define SR_DCOL (1 << 6)
+
+/* Bit fields in ISR, IMR, RISR, 7 bits */
+#define SPI_INT_TXEI (1 << 0)
+#define SPI_INT_TXOI (1 << 1)
+#define SPI_INT_RXUI (1 << 2)
+#define SPI_INT_RXOI (1 << 3)
+#define SPI_INT_RXFI (1 << 4)
+#define SPI_INT_MSTI (1 << 5)
+
+/* TX RX interrupt level threshhold, max can be 256 */
+#define SPI_INT_THRESHOLD 32
+
+enum dw_ssi_type {
+ SSI_MOTO_SPI = 0,
+ SSI_TI_SSP,
+ SSI_NS_MICROWIRE,
+};
+
+struct dw_spi_reg {
+ u32 ctrl0;
+ u32 ctrl1;
+ u32 ssienr;
+ u32 mwcr;
+ u32 ser;
+ u32 baudr;
+ u32 txfltr;
+ u32 rxfltr;
+ u32 txflr;
+ u32 rxflr;
+ u32 sr;
+ u32 imr;
+ u32 isr;
+ u32 risr;
+ u32 txoicr;
+ u32 rxoicr;
+ u32 rxuicr;
+ u32 msticr;
+ u32 icr;
+ u32 dmacr;
+ u32 dmatdlr;
+ u32 dmardlr;
+ u32 idr;
+ u32 version;
+ u32 dr; /* Currently oper as 32 bits,
+ though only low 16 bits matters */
+} __packed;
+
+struct dw_spi;
+struct dw_spi_dma_ops {
+ int (*dma_init)(struct dw_spi *dws);
+ void (*dma_exit)(struct dw_spi *dws);
+ int (*dma_transfer)(struct dw_spi *dws, int cs_change);
+};
+
+struct dw_spi {
+ struct spi_master *master;
+ struct spi_device *cur_dev;
+ struct device *parent_dev;
+ enum dw_ssi_type type;
+
+ void __iomem *regs;
+ unsigned long paddr;
+ u32 iolen;
+ int irq;
+ u32 fifo_len; /* depth of the FIFO buffer */
+ u32 max_freq; /* max bus freq supported */
+
+ u16 bus_num;
+ u16 num_cs; /* supported slave numbers */
+
+ /* Driver message queue */
+ struct workqueue_struct *workqueue;
+ struct work_struct pump_messages;
+ spinlock_t lock;
+ struct list_head queue;
+ int busy;
+ int run;
+
+ /* Message Transfer pump */
+ struct tasklet_struct pump_transfers;
+
+ /* Current message transfer state info */
+ struct spi_message *cur_msg;
+ struct spi_transfer *cur_transfer;
+ struct chip_data *cur_chip;
+ struct chip_data *prev_chip;
+ size_t len;
+ void *tx;
+ void *tx_end;
+ void *rx;
+ void *rx_end;
+ int dma_mapped;
+ dma_addr_t rx_dma;
+ dma_addr_t tx_dma;
+ size_t rx_map_len;
+ size_t tx_map_len;
+ u8 n_bytes; /* current is a 1/2 bytes op */
+ u8 max_bits_per_word; /* maxim is 16b */
+ u32 dma_width;
+ int cs_change;
+ int (*write)(struct dw_spi *dws);
+ int (*read)(struct dw_spi *dws);
+ irqreturn_t (*transfer_handler)(struct dw_spi *dws);
+ void (*cs_control)(u32 command);
+
+ /* Dma info */
+ int dma_inited;
+ struct dma_chan *txchan;
+ struct scatterlist tx_sgl;
+ struct dma_chan *rxchan;
+ struct scatterlist rx_sgl;
+ int dma_chan_done;
+ struct device *dma_dev;
+ dma_addr_t dma_addr; /* phy address of the Data register */
+ struct dw_spi_dma_ops *dma_ops;
+ void *dma_priv; /* platform relate info */
+ struct pci_dev *dmac;
+
+ /* Bus interface info */
+ void *priv;
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *debugfs;
+#endif
+};
+
+#define dw_readl(dw, name) \
+ __raw_readl(&(((struct dw_spi_reg *)dw->regs)->name))
+#define dw_writel(dw, name, val) \
+ __raw_writel((val), &(((struct dw_spi_reg *)dw->regs)->name))
+#define dw_readw(dw, name) \
+ __raw_readw(&(((struct dw_spi_reg *)dw->regs)->name))
+#define dw_writew(dw, name, val) \
+ __raw_writew((val), &(((struct dw_spi_reg *)dw->regs)->name))
+
+static inline void spi_enable_chip(struct dw_spi *dws, int enable)
+{
+ dw_writel(dws, ssienr, (enable ? 1 : 0));
+}
+
+static inline void spi_set_clk(struct dw_spi *dws, u16 div)
+{
+ dw_writel(dws, baudr, div);
+}
+
+static inline void spi_chip_sel(struct dw_spi *dws, u16 cs)
+{
+ if (cs > dws->num_cs)
+ return;
+
+ if (dws->cs_control)
+ dws->cs_control(1);
+
+ dw_writel(dws, ser, 1 << cs);
+}
+
+/* Disable IRQ bits */
+static inline void spi_mask_intr(struct dw_spi *dws, u32 mask)
+{
+ u32 new_mask;
+
+ new_mask = dw_readl(dws, imr) & ~mask;
+ dw_writel(dws, imr, new_mask);
+}
+
+/* Enable IRQ bits */
+static inline void spi_umask_intr(struct dw_spi *dws, u32 mask)
+{
+ u32 new_mask;
+
+ new_mask = dw_readl(dws, imr) | mask;
+ dw_writel(dws, imr, new_mask);
+}
+
+/*
+ * Each SPI slave device to work with dw_api controller should
+ * has such a structure claiming its working mode (PIO/DMA etc),
+ * which can be save in the "controller_data" member of the
+ * struct spi_device
+ */
+struct dw_spi_chip {
+ u8 poll_mode; /* 0 for contoller polling mode */
+ u8 type; /* SPI/SSP/Micrwire */
+ u8 enable_dma;
+ void (*cs_control)(u32 command);
+};
+
+extern int dw_spi_add_host(struct dw_spi *dws);
+extern void dw_spi_remove_host(struct dw_spi *dws);
+extern int dw_spi_suspend_host(struct dw_spi *dws);
+extern int dw_spi_resume_host(struct dw_spi *dws);
+extern void dw_spi_xfer_done(struct dw_spi *dws);
+
+/* platform related setup */
+extern int dw_spi_mid_init(struct dw_spi *dws); /* Intel MID platforms */
+#endif /* DW_SPI_HEADER_H */
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
-#include <linux/spi/dw_spi.h>
+
+#include "dw_spi.h"
#ifdef CONFIG_SPI_DW_MID_DMA
#include <linux/intel_mid_dma.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <linux/spi/dw_spi.h>
#include <linux/spi/spi.h>
+#include <linux/scatterlist.h>
+
+#include "dw_spi.h"
#define DRIVER_NAME "dw_spi_mmio"
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/slab.h>
-#include <linux/spi/dw_spi.h>
#include <linux/spi/spi.h>
+#include "dw_spi.h"
+
#define DRIVER_NAME "dw_spi_pci"
struct dw_spi_pci {
+++ /dev/null
-#ifndef DW_SPI_HEADER_H
-#define DW_SPI_HEADER_H
-
-#include <linux/io.h>
-#include <linux/scatterlist.h>
-
-/* Bit fields in CTRLR0 */
-#define SPI_DFS_OFFSET 0
-
-#define SPI_FRF_OFFSET 4
-#define SPI_FRF_SPI 0x0
-#define SPI_FRF_SSP 0x1
-#define SPI_FRF_MICROWIRE 0x2
-#define SPI_FRF_RESV 0x3
-
-#define SPI_MODE_OFFSET 6
-#define SPI_SCPH_OFFSET 6
-#define SPI_SCOL_OFFSET 7
-
-#define SPI_TMOD_OFFSET 8
-#define SPI_TMOD_MASK (0x3 << SPI_TMOD_OFFSET)
-#define SPI_TMOD_TR 0x0 /* xmit & recv */
-#define SPI_TMOD_TO 0x1 /* xmit only */
-#define SPI_TMOD_RO 0x2 /* recv only */
-#define SPI_TMOD_EPROMREAD 0x3 /* eeprom read mode */
-
-#define SPI_SLVOE_OFFSET 10
-#define SPI_SRL_OFFSET 11
-#define SPI_CFS_OFFSET 12
-
-/* Bit fields in SR, 7 bits */
-#define SR_MASK 0x7f /* cover 7 bits */
-#define SR_BUSY (1 << 0)
-#define SR_TF_NOT_FULL (1 << 1)
-#define SR_TF_EMPT (1 << 2)
-#define SR_RF_NOT_EMPT (1 << 3)
-#define SR_RF_FULL (1 << 4)
-#define SR_TX_ERR (1 << 5)
-#define SR_DCOL (1 << 6)
-
-/* Bit fields in ISR, IMR, RISR, 7 bits */
-#define SPI_INT_TXEI (1 << 0)
-#define SPI_INT_TXOI (1 << 1)
-#define SPI_INT_RXUI (1 << 2)
-#define SPI_INT_RXOI (1 << 3)
-#define SPI_INT_RXFI (1 << 4)
-#define SPI_INT_MSTI (1 << 5)
-
-/* TX RX interrupt level threshhold, max can be 256 */
-#define SPI_INT_THRESHOLD 32
-
-enum dw_ssi_type {
- SSI_MOTO_SPI = 0,
- SSI_TI_SSP,
- SSI_NS_MICROWIRE,
-};
-
-struct dw_spi_reg {
- u32 ctrl0;
- u32 ctrl1;
- u32 ssienr;
- u32 mwcr;
- u32 ser;
- u32 baudr;
- u32 txfltr;
- u32 rxfltr;
- u32 txflr;
- u32 rxflr;
- u32 sr;
- u32 imr;
- u32 isr;
- u32 risr;
- u32 txoicr;
- u32 rxoicr;
- u32 rxuicr;
- u32 msticr;
- u32 icr;
- u32 dmacr;
- u32 dmatdlr;
- u32 dmardlr;
- u32 idr;
- u32 version;
- u32 dr; /* Currently oper as 32 bits,
- though only low 16 bits matters */
-} __packed;
-
-struct dw_spi;
-struct dw_spi_dma_ops {
- int (*dma_init)(struct dw_spi *dws);
- void (*dma_exit)(struct dw_spi *dws);
- int (*dma_transfer)(struct dw_spi *dws, int cs_change);
-};
-
-struct dw_spi {
- struct spi_master *master;
- struct spi_device *cur_dev;
- struct device *parent_dev;
- enum dw_ssi_type type;
-
- void __iomem *regs;
- unsigned long paddr;
- u32 iolen;
- int irq;
- u32 fifo_len; /* depth of the FIFO buffer */
- u32 max_freq; /* max bus freq supported */
-
- u16 bus_num;
- u16 num_cs; /* supported slave numbers */
-
- /* Driver message queue */
- struct workqueue_struct *workqueue;
- struct work_struct pump_messages;
- spinlock_t lock;
- struct list_head queue;
- int busy;
- int run;
-
- /* Message Transfer pump */
- struct tasklet_struct pump_transfers;
-
- /* Current message transfer state info */
- struct spi_message *cur_msg;
- struct spi_transfer *cur_transfer;
- struct chip_data *cur_chip;
- struct chip_data *prev_chip;
- size_t len;
- void *tx;
- void *tx_end;
- void *rx;
- void *rx_end;
- int dma_mapped;
- dma_addr_t rx_dma;
- dma_addr_t tx_dma;
- size_t rx_map_len;
- size_t tx_map_len;
- u8 n_bytes; /* current is a 1/2 bytes op */
- u8 max_bits_per_word; /* maxim is 16b */
- u32 dma_width;
- int cs_change;
- int (*write)(struct dw_spi *dws);
- int (*read)(struct dw_spi *dws);
- irqreturn_t (*transfer_handler)(struct dw_spi *dws);
- void (*cs_control)(u32 command);
-
- /* Dma info */
- int dma_inited;
- struct dma_chan *txchan;
- struct scatterlist tx_sgl;
- struct dma_chan *rxchan;
- struct scatterlist rx_sgl;
- int dma_chan_done;
- struct device *dma_dev;
- dma_addr_t dma_addr; /* phy address of the Data register */
- struct dw_spi_dma_ops *dma_ops;
- void *dma_priv; /* platform relate info */
- struct pci_dev *dmac;
-
- /* Bus interface info */
- void *priv;
-#ifdef CONFIG_DEBUG_FS
- struct dentry *debugfs;
-#endif
-};
-
-#define dw_readl(dw, name) \
- __raw_readl(&(((struct dw_spi_reg *)dw->regs)->name))
-#define dw_writel(dw, name, val) \
- __raw_writel((val), &(((struct dw_spi_reg *)dw->regs)->name))
-#define dw_readw(dw, name) \
- __raw_readw(&(((struct dw_spi_reg *)dw->regs)->name))
-#define dw_writew(dw, name, val) \
- __raw_writew((val), &(((struct dw_spi_reg *)dw->regs)->name))
-
-static inline void spi_enable_chip(struct dw_spi *dws, int enable)
-{
- dw_writel(dws, ssienr, (enable ? 1 : 0));
-}
-
-static inline void spi_set_clk(struct dw_spi *dws, u16 div)
-{
- dw_writel(dws, baudr, div);
-}
-
-static inline void spi_chip_sel(struct dw_spi *dws, u16 cs)
-{
- if (cs > dws->num_cs)
- return;
-
- if (dws->cs_control)
- dws->cs_control(1);
-
- dw_writel(dws, ser, 1 << cs);
-}
-
-/* Disable IRQ bits */
-static inline void spi_mask_intr(struct dw_spi *dws, u32 mask)
-{
- u32 new_mask;
-
- new_mask = dw_readl(dws, imr) & ~mask;
- dw_writel(dws, imr, new_mask);
-}
-
-/* Enable IRQ bits */
-static inline void spi_umask_intr(struct dw_spi *dws, u32 mask)
-{
- u32 new_mask;
-
- new_mask = dw_readl(dws, imr) | mask;
- dw_writel(dws, imr, new_mask);
-}
-
-/*
- * Each SPI slave device to work with dw_api controller should
- * has such a structure claiming its working mode (PIO/DMA etc),
- * which can be save in the "controller_data" member of the
- * struct spi_device
- */
-struct dw_spi_chip {
- u8 poll_mode; /* 0 for contoller polling mode */
- u8 type; /* SPI/SSP/Micrwire */
- u8 enable_dma;
- void (*cs_control)(u32 command);
-};
-
-extern int dw_spi_add_host(struct dw_spi *dws);
-extern void dw_spi_remove_host(struct dw_spi *dws);
-extern int dw_spi_suspend_host(struct dw_spi *dws);
-extern int dw_spi_resume_host(struct dw_spi *dws);
-extern void dw_spi_xfer_done(struct dw_spi *dws);
-
-/* platform related setup */
-extern int dw_spi_mid_init(struct dw_spi *dws); /* Intel MID platforms */
-#endif /* DW_SPI_HEADER_H */
projects / linux.git / commitdiff