ARM: at91: add at91sam9263 DT support
authorJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Sun, 26 Feb 2012 11:12:43 +0000 (19:12 +0800)
committerJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Fri, 20 Apr 2012 15:17:21 +0000 (23:17 +0800)
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
arch/arm/boot/dts/at91sam9263.dtsi [new file with mode: 0644]
arch/arm/mach-at91/at91sam9263.c
arch/arm/mach-at91/at91sam9263_devices.c

diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
new file mode 100644 (file)
index 0000000..0209913
--- /dev/null
@@ -0,0 +1,220 @@
+/*
+ * at91sam9263.dtsi - Device Tree Include file for AT91SAM9263 family SoC
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 only.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+       model = "Atmel AT91SAM9263 family SoC";
+       compatible = "atmel,at91sam9263";
+       interrupt-parent = <&aic>;
+
+       aliases {
+               serial0 = &dbgu;
+               serial1 = &usart0;
+               serial2 = &usart1;
+               serial3 = &usart2;
+               gpio0 = &pioA;
+               gpio1 = &pioB;
+               gpio2 = &pioC;
+               gpio3 = &pioD;
+               gpio4 = &pioE;
+               tcb0 = &tcb0;
+       };
+       cpus {
+               cpu@0 {
+                       compatible = "arm,arm926ejs";
+               };
+       };
+
+       memory {
+               reg = <0x20000000 0x08000000>;
+       };
+
+       ahb {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               apb {
+                       compatible = "simple-bus";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges;
+
+                       aic: interrupt-controller@fffff000 {
+                               #interrupt-cells = <2>;
+                               compatible = "atmel,at91rm9200-aic";
+                               interrupt-controller;
+                               reg = <0xfffff000 0x200>;
+                       };
+
+                       pmc: pmc@fffffc00 {
+                               compatible = "atmel,at91rm9200-pmc";
+                               reg = <0xfffffc00 0x100>;
+                       };
+
+                       ramc: ramc@ffffe200 {
+                               compatible = "atmel,at91sam9260-sdramc";
+                               reg = <0xffffe200 0x200
+                                      0xffffe800 0x200>;
+                       };
+
+                       pit: timer@fffffd30 {
+                               compatible = "atmel,at91sam9260-pit";
+                               reg = <0xfffffd30 0xf>;
+                               interrupts = <1 4>;
+                       };
+
+                       tcb0: timer@fff7c000 {
+                               compatible = "atmel,at91rm9200-tcb";
+                               reg = <0xfff7c000 0x100>;
+                               interrupts = <19 4>;
+                       };
+
+                       rstc@fffffd00 {
+                               compatible = "atmel,at91sam9260-rstc";
+                               reg = <0xfffffd00 0x10>;
+                       };
+
+                       shdwc@fffffd10 {
+                               compatible = "atmel,at91sam9260-shdwc";
+                               reg = <0xfffffd10 0x10>;
+                       };
+
+                       pioA: gpio@fffff200 {
+                               compatible = "atmel,at91rm9200-gpio";
+                               reg = <0xfffff200 0x100>;
+                               interrupts = <2 4>;
+                               #gpio-cells = <2>;
+                               gpio-controller;
+                               interrupt-controller;
+                       };
+
+                       pioB: gpio@fffff400 {
+                               compatible = "atmel,at91rm9200-gpio";
+                               reg = <0xfffff400 0x100>;
+                               interrupts = <3 4>;
+                               #gpio-cells = <2>;
+                               gpio-controller;
+                               interrupt-controller;
+                       };
+
+                       pioC: gpio@fffff600 {
+                               compatible = "atmel,at91rm9200-gpio";
+                               reg = <0xfffff600 0x100>;
+                               interrupts = <4 4>;
+                               #gpio-cells = <2>;
+                               gpio-controller;
+                               interrupt-controller;
+                       };
+
+                       pioD: gpio@fffff800 {
+                               compatible = "atmel,at91rm9200-gpio";
+                               reg = <0xfffff800 0x100>;
+                               interrupts = <4 4>;
+                               #gpio-cells = <2>;
+                               gpio-controller;
+                               interrupt-controller;
+                       };
+
+                       pioE: gpio@fffffa00 {
+                               compatible = "atmel,at91rm9200-gpio";
+                               reg = <0xfffffa00 0x100>;
+                               interrupts = <4 4>;
+                               #gpio-cells = <2>;
+                               gpio-controller;
+                               interrupt-controller;
+                       };
+
+                       dbgu: serial@ffffee00 {
+                               compatible = "atmel,at91sam9260-usart";
+                               reg = <0xffffee00 0x200>;
+                               interrupts = <1 4>;
+                               status = "disabled";
+                       };
+
+                       usart0: serial@fff8c000 {
+                               compatible = "atmel,at91sam9260-usart";
+                               reg = <0xfff8c000 0x200>;
+                               interrupts = <7 4>;
+                               atmel,use-dma-rx;
+                               atmel,use-dma-tx;
+                               status = "disabled";
+                       };
+
+                       usart1: serial@fff90000 {
+                               compatible = "atmel,at91sam9260-usart";
+                               reg = <0xfff90000 0x200>;
+                               interrupts = <8 4>;
+                               atmel,use-dma-rx;
+                               atmel,use-dma-tx;
+                               status = "disabled";
+                       };
+
+                       usart2: serial@fff94000 {
+                               compatible = "atmel,at91sam9260-usart";
+                               reg = <0xfff94000 0x200>;
+                               interrupts = <9 4>;
+                               atmel,use-dma-rx;
+                               atmel,use-dma-tx;
+                               status = "disabled";
+                       };
+
+                       macb0: ethernet@fffbc000 {
+                               compatible = "cdns,at32ap7000-macb", "cdns,macb";
+                               reg = <0xfffbc000 0x100>;
+                               interrupts = <21 4>;
+                               status = "disabled";
+                       };
+
+                       usb1: gadget@fff78000 {
+                               compatible = "atmel,at91rm9200-udc";
+                               reg = <0xfff78000 0x4000>;
+                               interrupts = <24 4>;
+                               status = "disabled";
+                       };
+               };
+
+               nand0: nand@40000000 {
+                       compatible = "atmel,at91rm9200-nand";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       reg = <0x40000000 0x10000000
+                              0xffffe000 0x200
+                             >;
+                       atmel,nand-addr-offset = <21>;
+                       atmel,nand-cmd-offset = <22>;
+                       gpios = <&pioA 22 0
+                                &pioD 15 0
+                                0
+                               >;
+                       status = "disabled";
+               };
+
+               usb0: ohci@00a00000 {
+                       compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+                       reg = <0x00a00000 0x100000>;
+                       interrupts = <29 4>;
+                       status = "disabled";
+               };
+       };
+
+       i2c@0 {
+               compatible = "i2c-gpio";
+               gpios = <&pioB 4 0 /* sda */
+                        &pioB 5 0 /* scl */
+                       >;
+               i2c-gpio,sda-open-drain;
+               i2c-gpio,scl-open-drain;
+               i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+               #address-cells = <1>;
+               #size-cells = <0>;
+               status = "disabled";
+       };
+};
index 7fae36502fbbfa336b05c0420da5dce6b3249c8f..ed91c7e9f7c20312ccc9f25564187c84f8e118af 100644 (file)
@@ -199,6 +199,16 @@ static struct clk_lookup periph_clocks_lookups[] = {
        CLKDEV_CON_ID("pioC", &pioCDE_clk),
        CLKDEV_CON_ID("pioD", &pioCDE_clk),
        CLKDEV_CON_ID("pioE", &pioCDE_clk),
+       /* more usart lookup table for DT entries */
+       CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
+       CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk),
+       CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk),
+       CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
+       /* more tc lookup table for DT entries */
+       CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb_clk),
+       CLKDEV_CON_DEV_ID("hclk", "a00000.ohci", &ohci_clk),
+       CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk),
+       CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
index dfe5bc006d5e27e910001cb1cedcd68550e8cffb..175e0009eaa9b886a90694dcf5cb1d880e2e38ad 100644 (file)
@@ -953,8 +953,25 @@ static struct platform_device at91sam9263_tcb_device = {
        .num_resources  = ARRAY_SIZE(tcb_resources),
 };
 
+#if defined(CONFIG_OF)
+static struct of_device_id tcb_ids[] = {
+       { .compatible = "atmel,at91rm9200-tcb" },
+       { /*sentinel*/ }
+};
+#endif
+
 static void __init at91_add_device_tc(void)
 {
+#if defined(CONFIG_OF)
+       struct device_node *np;
+
+       np = of_find_matching_node(NULL, tcb_ids);
+       if (np) {
+               of_node_put(np);
+               return;
+       }
+#endif
+
        platform_device_register(&at91sam9263_tcb_device);
 }
 #else
@@ -1483,6 +1500,9 @@ void __init at91_add_device_serial(void) {}
  */
 static int __init at91_add_standard_devices(void)
 {
+       if (of_have_populated_dt())
+               return 0;
+
        at91_add_device_rtt();
        at91_add_device_watchdog();
        at91_add_device_tc();