endmenu
+menu "Power management options (EXPERIMENTAL)"
+depends on EXPERIMENTAL
+
+source kernel/power/Kconfig
+
+config APM
+ bool "Advanced Power Management Emulation"
+ depends on PM
+endmenu
+
source "net/Kconfig"
source "drivers/Kconfig"
# Makefile for the HP6xx specific parts of the kernel
#
-obj-y := mach.o setup.o
+obj-y := mach.o setup.o
+obj-$(CONFIG_PM) += pm.o pm_wakeup.o
+obj-$(CONFIG_APM) += hp6xx_apm.o
+
--- /dev/null
+/*
+ * bios-less APM driver for hp680
+ *
+ * Copyright 2005 (c) Andriy Skulysh <askulysh@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/apm_bios.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+#include <asm/apm.h>
+#include <asm/adc.h>
+#include <asm/hp6xx/hp6xx.h>
+
+#define SH7709_PGDR 0xa400012c
+
+#define APM_CRITICAL 10
+#define APM_LOW 30
+
+#define HP680_BATTERY_MAX 875
+#define HP680_BATTERY_MIN 600
+#define HP680_BATTERY_AC_ON 900
+
+#define MODNAME "hp6x0_apm"
+
+static int hp6x0_apm_get_info(char *buf, char **start, off_t fpos, int length)
+{
+ u8 pgdr;
+ char *p;
+ int battery_status;
+ int battery_flag;
+ int ac_line_status;
+ int time_units = APM_BATTERY_LIFE_UNKNOWN;
+
+ int battery = adc_single(ADC_CHANNEL_BATTERY);
+ int backup = adc_single(ADC_CHANNEL_BACKUP);
+ int charging = adc_single(ADC_CHANNEL_CHARGE);
+ int percentage;
+
+ percentage = 100 * (battery - HP680_BATTERY_MIN) /
+ (HP680_BATTERY_MAX - HP680_BATTERY_MIN);
+
+ ac_line_status = (battery > HP680_BATTERY_AC_ON) ?
+ APM_AC_ONLINE : APM_AC_OFFLINE;
+
+ p = buf;
+
+ pgdr = ctrl_inb(SH7709_PGDR);
+ if (pgdr & PGDR_MAIN_BATTERY_OUT) {
+ battery_status = APM_BATTERY_STATUS_NOT_PRESENT;
+ battery_flag = 0x80;
+ percentage = -1;
+ } else if (charging < 8 ) {
+ battery_status = APM_BATTERY_STATUS_CHARGING;
+ battery_flag = 0x08;
+ ac_line_status = 0xff;
+ } else if (percentage <= APM_CRITICAL) {
+ battery_status = APM_BATTERY_STATUS_CRITICAL;
+ battery_flag = 0x04;
+ } else if (percentage <= APM_LOW) {
+ battery_status = APM_BATTERY_STATUS_LOW;
+ battery_flag = 0x02;
+ } else {
+ battery_status = APM_BATTERY_STATUS_HIGH;
+ battery_flag = 0x01;
+ }
+
+ p += sprintf(p, "1.0 1.2 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n",
+ APM_32_BIT_SUPPORT,
+ ac_line_status,
+ battery_status,
+ battery_flag,
+ percentage,
+ time_units,
+ "min");
+ p += sprintf(p, "bat=%d backup=%d charge=%d\n",
+ battery, backup, charging);
+
+ return p - buf;
+}
+
+static irqreturn_t hp6x0_apm_interrupt(int irq, void *dev, struct pt_regs *regs)
+{
+ if (!apm_suspended)
+ apm_queue_event(APM_USER_SUSPEND);
+
+ return IRQ_HANDLED;
+}
+
+static int __init hp6x0_apm_init(void)
+{
+ int ret;
+
+ ret = request_irq(HP680_BTN_IRQ, hp6x0_apm_interrupt,
+ SA_INTERRUPT, MODNAME, 0);
+ if (unlikely(ret < 0)) {
+ printk(KERN_ERR MODNAME ": IRQ %d request failed\n",
+ HP680_BTN_IRQ);
+ return ret;
+ }
+
+ apm_get_info = hp6x0_apm_get_info;
+
+ return ret;
+}
+
+static void __exit hp6x0_apm_exit(void)
+{
+ free_irq(HP680_BTN_IRQ, 0);
+ apm_get_info = 0;
+}
+
+module_init(hp6x0_apm_init);
+module_exit(hp6x0_apm_exit);
+
+MODULE_AUTHOR("Adriy Skulysh");
+MODULE_DESCRIPTION("hp6xx Advanced Power Management");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * hp6x0 Power Management Routines
+ *
+ * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <asm/io.h>
+#include <asm/hd64461.h>
+#include <asm/hp6xx/hp6xx.h>
+#include <asm/cpu/dac.h>
+#include <asm/pm.h>
+
+#define STBCR 0xffffff82
+#define STBCR2 0xffffff88
+
+static int hp6x0_pm_enter(suspend_state_t state)
+{
+ u8 stbcr, stbcr2;
+#ifdef CONFIG_HD64461_ENABLER
+ u8 scr;
+ u16 hd64461_stbcr;
+#endif
+
+ if (state != PM_SUSPEND_MEM)
+ return -EINVAL;
+
+#ifdef CONFIG_HD64461_ENABLER
+ outb(0, HD64461_PCC1CSCIER);
+
+ scr = inb(HD64461_PCC1SCR);
+ scr |= HD64461_PCCSCR_VCC1;
+ outb(scr, HD64461_PCC1SCR);
+
+ hd64461_stbcr = inw(HD64461_STBCR);
+ hd64461_stbcr |= HD64461_STBCR_SPC1ST;
+ outw(hd64461_stbcr, HD64461_STBCR);
+#endif
+
+ ctrl_outb(0x1f, DACR);
+
+ stbcr = ctrl_inb(STBCR);
+ ctrl_outb(0x01, STBCR);
+
+ stbcr2 = ctrl_inb(STBCR2);
+ ctrl_outb(0x7f , STBCR2);
+
+ outw(0xf07f, HD64461_SCPUCR);
+
+ pm_enter();
+
+ outw(0, HD64461_SCPUCR);
+ ctrl_outb(stbcr, STBCR);
+ ctrl_outb(stbcr2, STBCR2);
+
+#ifdef CONFIG_HD64461_ENABLER
+ hd64461_stbcr = inw(HD64461_STBCR);
+ hd64461_stbcr &= ~HD64461_STBCR_SPC1ST;
+ outw(hd64461_stbcr, HD64461_STBCR);
+
+ outb(0x4c, HD64461_PCC1CSCIER);
+ outb(0x00, HD64461_PCC1CSCR);
+#endif
+
+ return 0;
+}
+
+/*
+ * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
+ */
+static struct pm_ops hp6x0_pm_ops = {
+ .pm_disk_mode = PM_DISK_FIRMWARE,
+ .enter = hp6x0_pm_enter,
+};
+
+static int __init hp6x0_pm_init(void)
+{
+ pm_set_ops(&hp6x0_pm_ops);
+ return 0;
+}
+
+late_initcall(hp6x0_pm_init);
--- /dev/null
+/*
+ * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/cpu/mmu_context.h>
+
+#define k0 r0
+#define k1 r1
+#define k2 r2
+#define k3 r3
+#define k4 r4
+
+/*
+ * Kernel mode register usage:
+ * k0 scratch
+ * k1 scratch
+ * k2 scratch (Exception code)
+ * k3 scratch (Return address)
+ * k4 scratch
+ * k5 reserved
+ * k6 Global Interrupt Mask (0--15 << 4)
+ * k7 CURRENT_THREAD_INFO (pointer to current thread info)
+ */
+
+ENTRY(wakeup_start)
+! clear STBY bit
+ mov #-126, k2
+ and #127, k0
+ mov.b k0, @k2
+! enable refresh
+ mov.l 5f, k1
+ mov.w 6f, k0
+ mov.w k0, @k1
+! jump to handler
+ mov.l 2f, k2
+ mov.l 3f, k3
+ mov.l @k2, k2
+
+ mov.l 4f, k1
+ jmp @k1
+ nop
+
+ .align 2
+1: .long EXPEVT
+2: .long INTEVT
+3: .long ret_from_irq
+4: .long handle_exception
+5: .long 0xffffff68
+6: .word 0x0524
+
+ENTRY(wakeup_end)
+ nop
#include <asm/hp6xx/hp6xx.h>
#include <asm/cpu/dac.h>
+#define SCPCR 0xa4000116
+#define SCPDR 0xa4000136
+
const char *get_system_type(void)
{
return "HP6xx";
{
u8 v8;
u16 v;
+
v = inw(HD64461_STBCR);
v |= HD64461_STBCR_SURTST | HD64461_STBCR_SIRST |
HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST |
v8 &= ~DACR_DAE;
ctrl_outb(v8,DACR);
+ v8 = ctrl_inb(SCPDR);
+ v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y;
+ v8 &= ~SCPDR_TS_SCAN_ENABLE;
+ ctrl_outb(v8, SCPDR);
+
+ v = ctrl_inw(SCPCR);
+ v &= ~SCPCR_TS_MASK;
+ v |= SCPCR_TS_ENABLE;
+ ctrl_outw(v, SCPCR);
+
return 0;
}
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
+obj-$(CONFIG_APM) += apm.o
+obj-$(CONFIG_PM) += pm.o
--- /dev/null
+/*
+ * bios-less APM driver for hp680
+ *
+ * Copyright 2005 (c) Andriy Skulysh <askulysh@gmail.com>
+ *
+ * based on ARM APM driver by
+ * Jamey Hicks <jamey@crl.dec.com>
+ *
+ * adapted from the APM BIOS driver for Linux by
+ * Stephen Rothwell (sfr@linuxcare.com)
+ *
+ * APM 1.2 Reference:
+ * Intel Corporation, Microsoft Corporation. Advanced Power Management
+ * (APM) BIOS Interface Specification, Revision 1.2, February 1996.
+ *
+ * [This document is available from Microsoft at:
+ * http://www.microsoft.com/hwdev/busbios/amp_12.htm]
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/poll.h>
+#include <linux/timer.h>
+#include <linux/slab.h>
+#include <linux/proc_fs.h>
+#include <linux/miscdevice.h>
+#include <linux/apm_bios.h>
+#include <linux/pm.h>
+#include <linux/pm_legacy.h>
+#include <asm/apm.h>
+
+#define MODNAME "apm"
+
+/*
+ * The apm_bios device is one of the misc char devices.
+ * This is its minor number.
+ */
+#define APM_MINOR_DEV 134
+
+/*
+ * Maximum number of events stored
+ */
+#define APM_MAX_EVENTS 16
+
+struct apm_queue {
+ unsigned int event_head;
+ unsigned int event_tail;
+ apm_event_t events[APM_MAX_EVENTS];
+};
+
+/*
+ * The per-file APM data
+ */
+struct apm_user {
+ struct list_head list;
+
+ unsigned int suser: 1;
+ unsigned int writer: 1;
+ unsigned int reader: 1;
+
+ int suspend_result;
+ unsigned int suspend_state;
+#define SUSPEND_NONE 0 /* no suspend pending */
+#define SUSPEND_PENDING 1 /* suspend pending read */
+#define SUSPEND_READ 2 /* suspend read, pending ack */
+#define SUSPEND_ACKED 3 /* suspend acked */
+#define SUSPEND_DONE 4 /* suspend completed */
+
+ struct apm_queue queue;
+};
+
+/*
+ * Local variables
+ */
+static int suspends_pending;
+
+static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);
+static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
+
+/*
+ * This is a list of everyone who has opened /dev/apm_bios
+ */
+static DECLARE_RWSEM(user_list_lock);
+static LIST_HEAD(apm_user_list);
+
+/*
+ * kapmd info. kapmd provides us a process context to handle
+ * "APM" events within - specifically necessary if we're going
+ * to be suspending the system.
+ */
+static DECLARE_WAIT_QUEUE_HEAD(kapmd_wait);
+static DECLARE_COMPLETION(kapmd_exit);
+static DEFINE_SPINLOCK(kapmd_queue_lock);
+static struct apm_queue kapmd_queue;
+
+int apm_suspended;
+EXPORT_SYMBOL(apm_suspended);
+
+/* Platform-specific apm_read_proc(). */
+int (*apm_get_info)(char *buf, char **start, off_t fpos, int length);
+EXPORT_SYMBOL(apm_get_info);
+
+/*
+ * APM event queue management.
+ */
+static inline int queue_empty(struct apm_queue *q)
+{
+ return q->event_head == q->event_tail;
+}
+
+static inline apm_event_t queue_get_event(struct apm_queue *q)
+{
+ q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS;
+ return q->events[q->event_tail];
+}
+
+static void queue_add_event(struct apm_queue *q, apm_event_t event)
+{
+ q->event_head = (q->event_head + 1) % APM_MAX_EVENTS;
+ if (q->event_head == q->event_tail) {
+ static int notified;
+
+ if (notified++ == 0)
+ printk(KERN_ERR "apm: an event queue overflowed\n");
+
+ q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS;
+ }
+ q->events[q->event_head] = event;
+}
+
+static void queue_event_one_user(struct apm_user *as, apm_event_t event)
+{
+ if (as->suser && as->writer) {
+ switch (event) {
+ case APM_SYS_SUSPEND:
+ case APM_USER_SUSPEND:
+ /*
+ * If this user already has a suspend pending,
+ * don't queue another one.
+ */
+ if (as->suspend_state != SUSPEND_NONE)
+ return;
+
+ as->suspend_state = SUSPEND_PENDING;
+ suspends_pending++;
+ break;
+ }
+ }
+ queue_add_event(&as->queue, event);
+}
+
+static void queue_event(apm_event_t event, struct apm_user *sender)
+{
+ struct apm_user *as;
+
+ down_read(&user_list_lock);
+
+ list_for_each_entry(as, &apm_user_list, list)
+ if (as != sender && as->reader)
+ queue_event_one_user(as, event);
+
+ up_read(&user_list_lock);
+ wake_up_interruptible(&apm_waitqueue);
+}
+
+/**
+ * apm_queue_event - queue an APM event for kapmd
+ * @event: APM event
+ *
+ * Queue an APM event for kapmd to process and ultimately take the
+ * appropriate action. Only a subset of events are handled:
+ * %APM_LOW_BATTERY
+ * %APM_POWER_STATUS_CHANGE
+ * %APM_USER_SUSPEND
+ * %APM_SYS_SUSPEND
+ * %APM_CRITICAL_SUSPEND
+ */
+void apm_queue_event(apm_event_t event)
+{
+ spin_lock_irq(&kapmd_queue_lock);
+ queue_add_event(&kapmd_queue, event);
+ spin_unlock_irq(&kapmd_queue_lock);
+
+ wake_up_interruptible(&kapmd_wait);
+}
+EXPORT_SYMBOL(apm_queue_event);
+
+static void apm_suspend(void)
+{
+ struct apm_user *as;
+ int err;
+
+ apm_suspended = 1;
+ err = pm_suspend(PM_SUSPEND_MEM);
+
+ /*
+ * Anyone on the APM queues will think we're still suspended.
+ * Send a message so everyone knows we're now awake again.
+ */
+ queue_event(APM_NORMAL_RESUME, NULL);
+
+ /*
+ * Finally, wake up anyone who is sleeping on the suspend.
+ */
+ down_read(&user_list_lock);
+ list_for_each_entry(as, &apm_user_list, list) {
+ as->suspend_result = err;
+ as->suspend_state = SUSPEND_DONE;
+ }
+ up_read(&user_list_lock);
+
+ wake_up(&apm_suspend_waitqueue);
+ apm_suspended = 0;
+}
+
+static ssize_t apm_read(struct file *fp, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct apm_user *as = fp->private_data;
+ apm_event_t event;
+ int i = count, ret = 0;
+
+ if (count < sizeof(apm_event_t))
+ return -EINVAL;
+
+ if (queue_empty(&as->queue) && fp->f_flags & O_NONBLOCK)
+ return -EAGAIN;
+
+ wait_event_interruptible(apm_waitqueue, !queue_empty(&as->queue));
+
+ while ((i >= sizeof(event)) && !queue_empty(&as->queue)) {
+ event = queue_get_event(&as->queue);
+
+ ret = -EFAULT;
+ if (copy_to_user(buf, &event, sizeof(event)))
+ break;
+
+ if (event == APM_SYS_SUSPEND || event == APM_USER_SUSPEND)
+ as->suspend_state = SUSPEND_READ;
+
+ buf += sizeof(event);
+ i -= sizeof(event);
+ }
+
+ if (i < count)
+ ret = count - i;
+
+ return ret;
+}
+
+static unsigned int apm_poll(struct file *fp, poll_table * wait)
+{
+ struct apm_user *as = fp->private_data;
+
+ poll_wait(fp, &apm_waitqueue, wait);
+ return queue_empty(&as->queue) ? 0 : POLLIN | POLLRDNORM;
+}
+
+/*
+ * apm_ioctl - handle APM ioctl
+ *
+ * APM_IOC_SUSPEND
+ * This IOCTL is overloaded, and performs two functions. It is used to:
+ * - initiate a suspend
+ * - acknowledge a suspend read from /dev/apm_bios.
+ * Only when everyone who has opened /dev/apm_bios with write permission
+ * has acknowledge does the actual suspend happen.
+ */
+static int
+apm_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg)
+{
+ struct apm_user *as = filp->private_data;
+ unsigned long flags;
+ int err = -EINVAL;
+
+ if (!as->suser || !as->writer)
+ return -EPERM;
+
+ switch (cmd) {
+ case APM_IOC_SUSPEND:
+ as->suspend_result = -EINTR;
+
+ if (as->suspend_state == SUSPEND_READ) {
+ /*
+ * If we read a suspend command from /dev/apm_bios,
+ * then the corresponding APM_IOC_SUSPEND ioctl is
+ * interpreted as an acknowledge.
+ */
+ as->suspend_state = SUSPEND_ACKED;
+ suspends_pending--;
+ } else {
+ /*
+ * Otherwise it is a request to suspend the system.
+ * Queue an event for all readers, and expect an
+ * acknowledge from all writers who haven't already
+ * acknowledged.
+ */
+ queue_event(APM_USER_SUSPEND, as);
+ }
+
+ /*
+ * If there are no further acknowledges required, suspend
+ * the system.
+ */
+ if (suspends_pending == 0)
+ apm_suspend();
+
+ /*
+ * Wait for the suspend/resume to complete. If there are
+ * pending acknowledges, we wait here for them.
+ *
+ * Note that we need to ensure that the PM subsystem does
+ * not kick us out of the wait when it suspends the threads.
+ */
+ flags = current->flags;
+ current->flags |= PF_NOFREEZE;
+
+ /*
+ * Note: do not allow a thread which is acking the suspend
+ * to escape until the resume is complete.
+ */
+ if (as->suspend_state == SUSPEND_ACKED)
+ wait_event(apm_suspend_waitqueue,
+ as->suspend_state == SUSPEND_DONE);
+ else
+ wait_event_interruptible(apm_suspend_waitqueue,
+ as->suspend_state == SUSPEND_DONE);
+
+ current->flags = flags;
+ err = as->suspend_result;
+ as->suspend_state = SUSPEND_NONE;
+ break;
+ }
+
+ return err;
+}
+
+static int apm_release(struct inode * inode, struct file * filp)
+{
+ struct apm_user *as = filp->private_data;
+ filp->private_data = NULL;
+
+ down_write(&user_list_lock);
+ list_del(&as->list);
+ up_write(&user_list_lock);
+
+ /*
+ * We are now unhooked from the chain. As far as new
+ * events are concerned, we no longer exist. However, we
+ * need to balance suspends_pending, which means the
+ * possibility of sleeping.
+ */
+ if (as->suspend_state != SUSPEND_NONE) {
+ suspends_pending -= 1;
+ if (suspends_pending == 0)
+ apm_suspend();
+ }
+
+ kfree(as);
+ return 0;
+}
+
+static int apm_open(struct inode * inode, struct file * filp)
+{
+ struct apm_user *as;
+
+ as = kzalloc(sizeof(*as), GFP_KERNEL);
+ if (as) {
+ /*
+ * XXX - this is a tiny bit broken, when we consider BSD
+ * process accounting. If the device is opened by root, we
+ * instantly flag that we used superuser privs. Who knows,
+ * we might close the device immediately without doing a
+ * privileged operation -- cevans
+ */
+ as->suser = capable(CAP_SYS_ADMIN);
+ as->writer = (filp->f_mode & FMODE_WRITE) == FMODE_WRITE;
+ as->reader = (filp->f_mode & FMODE_READ) == FMODE_READ;
+
+ down_write(&user_list_lock);
+ list_add(&as->list, &apm_user_list);
+ up_write(&user_list_lock);
+
+ filp->private_data = as;
+ }
+
+ return as ? 0 : -ENOMEM;
+}
+
+static struct file_operations apm_bios_fops = {
+ .owner = THIS_MODULE,
+ .read = apm_read,
+ .poll = apm_poll,
+ .ioctl = apm_ioctl,
+ .open = apm_open,
+ .release = apm_release,
+};
+
+static struct miscdevice apm_device = {
+ .minor = APM_MINOR_DEV,
+ .name = "apm_bios",
+ .fops = &apm_bios_fops
+};
+
+
+#ifdef CONFIG_PROC_FS
+/*
+ * Arguments, with symbols from linux/apm_bios.h.
+ *
+ * 0) Linux driver version (this will change if format changes)
+ * 1) APM BIOS Version. Usually 1.0, 1.1 or 1.2.
+ * 2) APM flags from APM Installation Check (0x00):
+ * bit 0: APM_16_BIT_SUPPORT
+ * bit 1: APM_32_BIT_SUPPORT
+ * bit 2: APM_IDLE_SLOWS_CLOCK
+ * bit 3: APM_BIOS_DISABLED
+ * bit 4: APM_BIOS_DISENGAGED
+ * 3) AC line status
+ * 0x00: Off-line
+ * 0x01: On-line
+ * 0x02: On backup power (BIOS >= 1.1 only)
+ * 0xff: Unknown
+ * 4) Battery status
+ * 0x00: High
+ * 0x01: Low
+ * 0x02: Critical
+ * 0x03: Charging
+ * 0x04: Selected battery not present (BIOS >= 1.2 only)
+ * 0xff: Unknown
+ * 5) Battery flag
+ * bit 0: High
+ * bit 1: Low
+ * bit 2: Critical
+ * bit 3: Charging
+ * bit 7: No system battery
+ * 0xff: Unknown
+ * 6) Remaining battery life (percentage of charge):
+ * 0-100: valid
+ * -1: Unknown
+ * 7) Remaining battery life (time units):
+ * Number of remaining minutes or seconds
+ * -1: Unknown
+ * 8) min = minutes; sec = seconds
+ */
+static int apm_read_proc(char *buf, char **start, off_t fpos, int length)
+{
+ if (likely(apm_get_info))
+ return apm_get_info(buf, start, fpos, length);
+
+ return -EINVAL;
+}
+#endif
+
+static int kapmd(void *arg)
+{
+ daemonize("kapmd");
+ current->flags |= PF_NOFREEZE;
+
+ do {
+ apm_event_t event;
+
+ wait_event_interruptible(kapmd_wait,
+ !queue_empty(&kapmd_queue) || !pm_active);
+
+ if (!pm_active)
+ break;
+
+ spin_lock_irq(&kapmd_queue_lock);
+ event = 0;
+ if (!queue_empty(&kapmd_queue))
+ event = queue_get_event(&kapmd_queue);
+ spin_unlock_irq(&kapmd_queue_lock);
+
+ switch (event) {
+ case 0:
+ break;
+
+ case APM_LOW_BATTERY:
+ case APM_POWER_STATUS_CHANGE:
+ queue_event(event, NULL);
+ break;
+
+ case APM_USER_SUSPEND:
+ case APM_SYS_SUSPEND:
+ queue_event(event, NULL);
+ if (suspends_pending == 0)
+ apm_suspend();
+ break;
+
+ case APM_CRITICAL_SUSPEND:
+ apm_suspend();
+ break;
+ }
+ } while (1);
+
+ complete_and_exit(&kapmd_exit, 0);
+}
+
+static int __init apm_init(void)
+{
+ int ret;
+
+ pm_active = 1;
+
+ ret = kernel_thread(kapmd, NULL, CLONE_KERNEL);
+ if (unlikely(ret < 0)) {
+ pm_active = 0;
+ return ret;
+ }
+
+ create_proc_info_entry("apm", 0, NULL, apm_read_proc);
+
+ ret = misc_register(&apm_device);
+ if (unlikely(ret != 0)) {
+ remove_proc_entry("apm", NULL);
+
+ pm_active = 0;
+ wake_up(&kapmd_wait);
+ wait_for_completion(&kapmd_exit);
+ }
+
+ return ret;
+}
+
+static void __exit apm_exit(void)
+{
+ misc_deregister(&apm_device);
+ remove_proc_entry("apm", NULL);
+
+ pm_active = 0;
+ wake_up(&kapmd_wait);
+ wait_for_completion(&kapmd_exit);
+}
+
+module_init(apm_init);
+module_exit(apm_exit);
+
+MODULE_AUTHOR("Stephen Rothwell, Andriy Skulysh");
+MODULE_DESCRIPTION("Advanced Power Management");
+MODULE_LICENSE("GPL");
.align 2
ret_from_exception:
preempt_stop()
-ret_from_irq:
+ENTRY(ret_from_irq)
!
mov #OFF_SR, r0
mov.l @(r0,r15), r0 ! get status register
!
!
.align 2
-handle_exception:
+ENTRY(handle_exception)
! Using k0, k1 for scratch registers (r0_bank1, r1_bank),
! save all registers onto stack.
!
--- /dev/null
+/*
+ * Generic Power Management Routine
+ *
+ * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ */
+#include <linux/suspend.h>
+#include <linux/delay.h>
+#include <linux/gfp.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+#include <asm/watchdog.h>
+#include <asm/pm.h>
+
+#define INTR_OFFSET 0x600
+
+#define STBCR 0xffffff82
+#define STBCR2 0xffffff88
+
+#define STBCR_STBY 0x80
+#define STBCR_MSTP2 0x04
+
+#define MCR 0xffffff68
+#define RTCNT 0xffffff70
+
+#define MCR_RMODE 2
+#define MCR_RFSH 4
+
+void pm_enter(void)
+{
+ u8 stbcr, csr;
+ u16 frqcr, mcr;
+ u32 vbr_new, vbr_old;
+
+ set_bl_bit();
+
+ /* set wdt */
+ csr = sh_wdt_read_csr();
+ csr &= ~WTCSR_TME;
+ csr |= WTCSR_CKS_4096;
+ sh_wdt_write_csr(csr);
+ csr = sh_wdt_read_csr();
+ sh_wdt_write_cnt(0);
+
+ /* disable PLL1 */
+ frqcr = ctrl_inw(FRQCR);
+ frqcr &= ~(FRQCR_PLLEN | FRQCR_PSTBY);
+ ctrl_outw(frqcr, FRQCR);
+
+ /* enable standby */
+ stbcr = ctrl_inb(STBCR);
+ ctrl_outb(stbcr | STBCR_STBY | STBCR_MSTP2, STBCR);
+
+ /* set self-refresh */
+ mcr = ctrl_inw(MCR);
+ ctrl_outw(mcr & ~MCR_RFSH, MCR);
+
+ /* set interrupt handler */
+ asm volatile("stc vbr, %0" : "=r" (vbr_old));
+ vbr_new = get_zeroed_page(GFP_ATOMIC);
+ udelay(50);
+ memcpy((void*)(vbr_new + INTR_OFFSET),
+ &wakeup_start, &wakeup_end - &wakeup_start);
+ asm volatile("ldc %0, vbr" : : "r" (vbr_new));
+
+ ctrl_outw(0, RTCNT);
+ ctrl_outw(mcr | MCR_RFSH | MCR_RMODE, MCR);
+
+ cpu_sleep();
+
+ asm volatile("ldc %0, vbr" : : "r" (vbr_old));
+
+ free_page(vbr_new);
+
+ /* enable PLL1 */
+ frqcr = ctrl_inw(FRQCR);
+ frqcr |= FRQCR_PSTBY;
+ ctrl_outw(frqcr, FRQCR);
+ udelay(50);
+ frqcr |= FRQCR_PLLEN;
+ ctrl_outw(frqcr, FRQCR);
+
+ ctrl_outb(stbcr, STBCR);
+
+ clear_bl_bit();
+}
EXPORT_SYMBOL(synchronize_irq);
#endif
+#ifdef CONFIG_PM
+EXPORT_SYMBOL(pm_suspend);
+#endif
+
EXPORT_SYMBOL(csum_partial);
#ifdef CONFIG_IPV6
EXPORT_SYMBOL(csum_ipv6_magic);
}
}
+#ifdef CONFIG_PM
+int timer_suspend(struct sys_device *dev, pm_message_t state)
+{
+ struct sys_timer *sys_timer = container_of(dev, struct sys_timer, dev);
+
+ sys_timer->ops->stop();
+
+ return 0;
+}
+
+int timer_resume(struct sys_device *dev)
+{
+ struct sys_timer *sys_timer = container_of(dev, struct sys_timer, dev);
+
+ sys_timer->ops->start();
+
+ return 0;
+}
+#else
+#define timer_suspend NULL
+#define timer_resume NULL
+#endif
+
static struct sysdev_class timer_sysclass = {
set_kset_name("timer"),
+ .suspend = timer_suspend,
+ .resume = timer_resume,
};
static int __init timer_init_sysfs(void)
.ops = &tmu_clk_ops,
};
+static int tmu_timer_start(void)
+{
+ ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
+ return 0;
+}
+
+static int tmu_timer_stop(void)
+{
+ ctrl_outb(0, TMU_TSTR);
+ return 0;
+}
+
static int tmu_timer_init(void)
{
unsigned long interval;
tmu0_clk.parent = clk_get("module_clk");
/* Start TMU0 */
- ctrl_outb(0, TMU_TSTR);
+ tmu_timer_stop();
#if !defined(CONFIG_CPU_SUBTYPE_SH7300) && !defined(CONFIG_CPU_SUBTYPE_SH7760)
ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
#endif
ctrl_outl(interval, TMU0_TCOR);
ctrl_outl(interval, TMU0_TCNT);
- ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
+ tmu_timer_start();
return 0;
}
struct sys_timer_ops tmu_timer_ops = {
.init = tmu_timer_init,
+ .start = tmu_timer_start,
+ .stop = tmu_timer_stop,
.get_frequency = tmu_timer_get_frequency,
.get_offset = tmu_timer_get_offset,
};
#define HP680_TS_ABS_Y_MIN 80
#define HP680_TS_ABS_Y_MAX 910
-#define SCPCR 0xa4000116
#define PHDR 0xa400012e
#define SCPDR 0xa4000136
static int __init hp680_ts_init(void)
{
- u8 scpdr;
- u16 scpcr;
-
- scpdr = ctrl_inb(SCPDR);
- scpdr |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y;
- scpdr &= ~SCPDR_TS_SCAN_ENABLE;
- ctrl_outb(scpdr, SCPDR);
-
- scpcr = ctrl_inw(SCPCR);
- scpcr &= ~SCPCR_TS_MASK;
- scpcr |= SCPCR_TS_ENABLE;
- ctrl_outw(scpcr, SCPCR);
-
hp680_ts_dev = input_allocate_device();
if (!hp680_ts_dev)
return -ENOMEM;
--- /dev/null
+/*
+ * Copyright 2006 (c) Andriy Skulysh <askulysh@gmail.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#ifndef __ASM_SH_APM_H
+#define __ASM_SH_APM_H
+
+#define APM_AC_OFFLINE 0
+#define APM_AC_ONLINE 1
+#define APM_AC_BACKUP 2
+#define APM_AC_UNKNOWN 0xff
+
+#define APM_BATTERY_STATUS_HIGH 0
+#define APM_BATTERY_STATUS_LOW 1
+#define APM_BATTERY_STATUS_CRITICAL 2
+#define APM_BATTERY_STATUS_CHARGING 3
+#define APM_BATTERY_STATUS_NOT_PRESENT 4
+#define APM_BATTERY_STATUS_UNKNOWN 0xff
+
+#define APM_BATTERY_LIFE_UNKNOWN 0xFFFF
+#define APM_BATTERY_LIFE_MINUTES 0x8000
+#define APM_BATTERY_LIFE_VALUE_MASK 0x7FFF
+
+#define APM_BATTERY_FLAG_HIGH (1 << 0)
+#define APM_BATTERY_FLAG_LOW (1 << 1)
+#define APM_BATTERY_FLAG_CRITICAL (1 << 2)
+#define APM_BATTERY_FLAG_CHARGING (1 << 3)
+#define APM_BATTERY_FLAG_NOT_PRESENT (1 << 7)
+#define APM_BATTERY_FLAG_UNKNOWN 0xff
+
+#define APM_UNITS_MINS 0
+#define APM_UNITS_SECS 1
+#define APM_UNITS_UNKNOWN -1
+
+
+extern int (*apm_get_info)(char *buf, char **start, off_t fpos, int length);
+extern int apm_suspended;
+
+void apm_queue_event(apm_event_t event);
+
+#endif
#define MIN_DIVISOR_NR 0
#define MAX_DIVISOR_NR 4
+#define FRQCR_CKOEN 0x0100
+#define FRQCR_PLLEN 0x0080
+#define FRQCR_PSTBY 0x0040
+
#endif /* __ASM_CPU_SH3_FREQ_H */
#define HD64461_LCDCBAR 0x11000
#define HD64461_LCDCLOR 0x11002
#define HD64461_LCDCCR 0x11004
-#define HD64461_LCDCCR_MOFF 0x80
+#define HD64461_LCDCCR_STBACK 0x0400
+#define HD64461_LCDCCR_STREQ 0x0100
+#define HD64461_LCDCCR_MOFF 0x0080
+#define HD64461_LCDCCR_REFSEL 0x0040
+#define HD64461_LCDCCR_EPON 0x0020
+#define HD64461_LCDCCR_SPON 0x0010
#define HD64461_LDR1 0x11010
#define HD64461_LDR1_DON 0x01
#define __ASM_SH_HP6XX_H
/*
- * Copyright (C) 2003 Andriy Skulysh
+ * Copyright (C) 2003, 2004, 2005 Andriy Skulysh
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
*/
-#define HP680_TS_IRQ IRQ3_IRQ
+#define HP680_BTN_IRQ IRQ0_IRQ
+#define HP680_TS_IRQ IRQ3_IRQ
+#define HP680_HD64461_IRQ IRQ4_IRQ
#define DAC_LCD_BRIGHTNESS 0
#define DAC_SPEAKER_VOLUME 1
+#define PGDR_OPENED 0x01
+#define PGDR_MAIN_BATTERY_OUT 0x04
+#define PGDR_PLAY_BUTTON 0x08
+#define PGDR_REWIND_BUTTON 0x10
+#define PGDR_RECORD_BUTTON 0x20
+
#define PHDR_TS_PEN_DOWN 0x08
+#define PJDR_LED_BLINK 0x02
+
+#define PKDR_LED_GREEN 0x10
+
#define SCPDR_TS_SCAN_ENABLE 0x20
#define SCPDR_TS_SCAN_Y 0x02
#define SCPDR_TS_SCAN_X 0x01
#define ADC_CHANNEL_TS_Y 1
#define ADC_CHANNEL_TS_X 2
+#define ADC_CHANNEL_BATTERY 3
+#define ADC_CHANNEL_BACKUP 4
+#define ADC_CHANNEL_CHARGE 5
#define HD64461_GPADR_SPEAKER 0x01
#define HD64461_GPADR_PCMCIA0 (0x02|0x08)
+
#define HD64461_GPBDR_LCDOFF 0x01
+#define HD64461_GPBDR_LCD_CONTRAST_MASK 0x78
#define HD64461_GPBDR_LED_RED 0x80
+#include <asm/hd64461.h>
+#include <asm/io.h>
+
+#define PJDR 0xa4000130
+#define PKDR 0xa4000132
+
+static inline void hp6xx_led_red(int on)
+{
+ u16 v16;
+ v16 = ctrl_inw(CONFIG_HD64461_IOBASE + HD64461_GPBDR - 0x10000);
+ if (on)
+ ctrl_outw(v16 & (~HD64461_GPBDR_LED_RED), CONFIG_HD64461_IOBASE + HD64461_GPBDR - 0x10000);
+ else
+ ctrl_outw(v16 | HD64461_GPBDR_LED_RED, CONFIG_HD64461_IOBASE + HD64461_GPBDR - 0x10000);
+}
+
+static inline void hp6xx_led_green(int on)
+{
+ u8 v8;
+
+ v8 = ctrl_inb(PKDR);
+ if (on)
+ ctrl_outb(v8 & (~PKDR_LED_GREEN), PKDR);
+ else
+ ctrl_outb(v8 | PKDR_LED_GREEN, PKDR);
+}
+
#endif /* __ASM_SH_HP6XX_H */
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 2006 (c) Andriy Skulysh <askulysh@gmail.com>
+ *
+ */
+#ifndef __ASM_SH_PM_H
+#define __ASM_SH_PM_H
+
+extern u8 wakeup_start;
+extern u8 wakeup_end;
+
+void pm_enter(void);
+
+#endif
: "memory");
}
+static __inline__ void set_bl_bit(void)
+{
+ unsigned long __dummy0, __dummy1;
+
+ __asm__ __volatile__ ("stc sr, %0\n\t"
+ "or %2, %0\n\t"
+ "and %3, %0\n\t"
+ "ldc %0, sr"
+ : "=&r" (__dummy0), "=r" (__dummy1)
+ : "r" (0x10000000), "r" (0xffffff0f)
+ : "memory");
+}
+
+static __inline__ void clear_bl_bit(void)
+{
+ unsigned long __dummy0, __dummy1;
+
+ __asm__ __volatile__ ("stc sr, %0\n\t"
+ "and %2, %0\n\t"
+ "ldc %0, sr"
+ : "=&r" (__dummy0), "=r" (__dummy1)
+ : "1" (~0x10000000)
+ : "memory");
+}
+
#define local_save_flags(x) \
__asm__("stc sr, %0; and #0xf0, %0" : "=&z" (x) :/**/: "memory" )
struct sys_timer_ops {
int (*init)(void);
+ int (*start)(void);
+ int (*stop)(void);
unsigned long (*get_offset)(void);
unsigned long (*get_frequency)(void);
};
projects / linux-drm-fsl-dcu.git / commitdiff