// Big Sur Init Routines
/*===========================================================*/
-const char *get_system_type(void)
-{
- return "Big Sur";
-}
-
-/*
- * The Machine Vector
- */
-extern void heartbeat_bigsur(void);
-extern void init_bigsur_IRQ(void);
-
-struct sh_machine_vector mv_bigsur __initmv = {
- .mv_nr_irqs = NR_IRQS, // Defined in <asm/irq.h>
-
- .mv_isa_port2addr = bigsur_isa_port2addr,
- .mv_irq_demux = bigsur_irq_demux,
-
- .mv_init_irq = init_bigsur_IRQ,
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_bigsur,
-#endif
-};
-ALIAS_MV(bigsur)
-
-int __init platform_setup(void)
+static void __init bigsur_setup(char **cmdline_p)
{
/* Mask all 2nd level IRQ's */
outb(-1,BIGSUR_IMR0);
outw(1, BIGSUR_ETHR+0xe);
/* set the IO port to BIGSUR_ETHER_IOPORT */
outw(BIGSUR_ETHER_IOPORT<<3, BIGSUR_ETHR+0x2);
-
- return 0;
}
+/*
+ * The Machine Vector
+ */
+extern void heartbeat_bigsur(void);
+extern void init_bigsur_IRQ(void);
+
+struct sh_machine_vector mv_bigsur __initmv = {
+ .mv_name = "Big Sur",
+ .mv_setup = bigsur_setup,
+
+ .mv_isa_port2addr = bigsur_isa_port2addr,
+ .mv_irq_demux = bigsur_irq_demux,
+
+ .mv_init_irq = init_bigsur_IRQ,
+#ifdef CONFIG_HEARTBEAT
+ .mv_heartbeat = heartbeat_bigsur,
+#endif
+};
+ALIAS_MV(bigsur)
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/device.h>
-
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/rtc.h>
void *dreamcast_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t);
int dreamcast_consistent_free(struct device *, size_t, void *, dma_addr_t);
-const char *get_system_type(void)
-{
- return "Sega Dreamcast";
-}
-
-struct sh_machine_vector mv_dreamcast __initmv = {
- .mv_nr_irqs = NR_IRQS,
-
- .mv_irq_demux = systemasic_irq_demux,
-
-#ifdef CONFIG_PCI
- .mv_consistent_alloc = dreamcast_consistent_alloc,
- .mv_consistent_free = dreamcast_consistent_free,
-#endif
-};
-ALIAS_MV(dreamcast)
-
-int __init platform_setup(void)
+static void __init dreamcast_setup(char **cmdline_p)
{
int i;
if (gapspci_init() < 0)
printk(KERN_WARNING "GAPSPCI was not detected.\n");
#endif
-
- return 0;
}
+
+struct sh_machine_vector mv_dreamcast __initmv = {
+ .mv_name = "Sega Dreamcast",
+ .mv_setup = dreamcast_setup,
+ .mv_irq_demux = systemasic_irq_demux,
+
+#ifdef CONFIG_PCI
+ .mv_consistent_alloc = dreamcast_consistent_alloc,
+ .mv_consistent_free = dreamcast_consistent_free,
+#endif
+};
+ALIAS_MV(dreamcast)
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/types.h>
-
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/machvec.h>
#include <asm/mach/ec3104.h>
-const char *get_system_type(void)
+static void __init ec3104_setup(char **cmdline_p)
{
- return "EC3104";
+ char str[8];
+ int i;
+
+ for (i=0; i<8; i++)
+ str[i] = ctrl_readb(EC3104_BASE + i);
+
+ for (i = EC3104_IRQBASE; i < EC3104_IRQBASE + 32; i++)
+ irq_desc[i].handler = &ec3104_int;
+
+ printk("initializing EC3104 \"%.8s\" at %08x, IRQ %d, IRQ base %d\n",
+ str, EC3104_BASE, EC3104_IRQ, EC3104_IRQBASE);
+
+ /* mask all interrupts. this should have been done by the boot
+ * loader for us but we want to be sure ... */
+ ctrl_writel(0xffffffff, EC3104_IMR);
}
/*
* The Machine Vector
*/
-
struct sh_machine_vector mv_ec3104 __initmv = {
+ .mv_name = "EC3104",
+ .mv_setup = ec3104_setup,
.mv_nr_irqs = 96,
.mv_inb = ec3104_inb,
.mv_irq_demux = ec3104_irq_demux,
};
-
ALIAS_MV(ec3104)
-
-int __init platform_setup(void)
-{
- char str[8];
- int i;
-
- if (0)
- return 0;
-
- for (i=0; i<8; i++)
- str[i] = ctrl_readb(EC3104_BASE + i);
-
- for (i = EC3104_IRQBASE; i < EC3104_IRQBASE + 32; i++)
- irq_desc[i].chip = &ec3104_int;
-
- printk("initializing EC3104 \"%.8s\" at %08x, IRQ %d, IRQ base %d\n",
- str, EC3104_BASE, EC3104_IRQ, EC3104_IRQBASE);
-
-
- /* mask all interrupts. this should have been done by the boot
- * loader for us but we want to be sure ... */
- ctrl_writel(0xffffffff, EC3104_IMR);
-
- return 0;
-}
-
# Makefile for the HP6xx specific parts of the kernel
#
-obj-y := mach.o setup.o
+obj-y := setup.o
obj-$(CONFIG_PM) += pm.o pm_wakeup.o
obj-$(CONFIG_APM) += hp6xx_apm.o
-
-
#define SCPCR 0xa4000116
#define SCPDR 0xa4000136
-const char *get_system_type(void)
-{
- return "HP6xx";
-}
-
-int __init platform_setup(void)
+static void __init hp6xx_setup(char **cmdline_p)
{
u8 v8;
u16 v;
v &= ~SCPCR_TS_MASK;
v |= SCPCR_TS_ENABLE;
ctrl_outw(v, SCPCR);
-
- return 0;
}
+
+/*
+ * XXX: This is stupid, we should have a generic machine vector for the cchips
+ * and just wrap the platform setup code in to this, as it's the only thing
+ * that ends up being different.
+ */
+struct sh_machine_vector mv_hp6xx __initmv = {
+ .mv_name = "hp6xx",
+ .mv_setup = hp6xx_setup,
+ .mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM,
+
+ .mv_inb = hd64461_inb,
+ .mv_inw = hd64461_inw,
+ .mv_inl = hd64461_inl,
+ .mv_outb = hd64461_outb,
+ .mv_outw = hd64461_outw,
+ .mv_outl = hd64461_outl,
+
+ .mv_inb_p = hd64461_inb_p,
+ .mv_inw_p = hd64461_inw,
+ .mv_inl_p = hd64461_inl,
+ .mv_outb_p = hd64461_outb_p,
+ .mv_outw_p = hd64461_outw,
+ .mv_outl_p = hd64461_outl,
+
+ .mv_insb = hd64461_insb,
+ .mv_insw = hd64461_insw,
+ .mv_insl = hd64461_insl,
+ .mv_outsb = hd64461_outsb,
+ .mv_outsw = hd64461_outsw,
+ .mv_outsl = hd64461_outsl,
+
+ .mv_readw = hd64461_readw,
+ .mv_writew = hd64461_writew,
+
+ .mv_irq_demux = hd64461_irq_demux,
+};
+ALIAS_MV(hp6xx)
landisk_buzzerparam >>= 1;
}
-/*
- * The Machine Vector
- */
-struct sh_machine_vector mv_landisk __initmv = {
- .mv_nr_irqs = 72,
- .mv_inb = landisk_inb,
- .mv_inw = landisk_inw,
- .mv_inl = landisk_inl,
- .mv_outb = landisk_outb,
- .mv_outw = landisk_outw,
- .mv_outl = landisk_outl,
- .mv_inb_p = landisk_inb_p,
- .mv_inw_p = landisk_inw,
- .mv_inl_p = landisk_inl,
- .mv_outb_p = landisk_outb_p,
- .mv_outw_p = landisk_outw,
- .mv_outl_p = landisk_outl,
- .mv_insb = landisk_insb,
- .mv_insw = landisk_insw,
- .mv_insl = landisk_insl,
- .mv_outsb = landisk_outsb,
- .mv_outsw = landisk_outsw,
- .mv_outsl = landisk_outsl,
- .mv_ioport_map = landisk_ioport_map,
- .mv_init_irq = init_landisk_IRQ,
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_landisk,
-#endif
-};
-ALIAS_MV(landisk)
-
-const char *get_system_type(void)
-{
- return "LANDISK";
-}
-
static void landisk_power_off(void)
{
ctrl_outb(0x01, PA_SHUTDOWN);
}
}
-void __init platform_setup(void)
-{
- landisk_buzzerparam = 0;
- check_usl5p();
-
- printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
- board_time_init = landisk_time_init;
- pm_power_off = landisk_power_off;
-}
-
void *area5_io_base;
void *area6_io_base;
return 0;
}
-__initcall(landisk_cf_init);
+static void __init landisk_setup(char **cmdline_p)
+{
+ device_initcall(landisk_cf_init);
+
+ landisk_buzzerparam = 0;
+ check_usl5p();
+
+ printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
+
+ board_time_init = landisk_time_init;
+ pm_power_off = landisk_power_off;
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_landisk __initmv = {
+ .mv_name = "LANDISK",
+ .mv_setup = landisk_setup,
+ .mv_nr_irqs = 72,
+ .mv_inb = landisk_inb,
+ .mv_inw = landisk_inw,
+ .mv_inl = landisk_inl,
+ .mv_outb = landisk_outb,
+ .mv_outw = landisk_outw,
+ .mv_outl = landisk_outl,
+ .mv_inb_p = landisk_inb_p,
+ .mv_inw_p = landisk_inw,
+ .mv_inl_p = landisk_inl,
+ .mv_outb_p = landisk_outb_p,
+ .mv_outw_p = landisk_outw,
+ .mv_outl_p = landisk_outl,
+ .mv_insb = landisk_insb,
+ .mv_insw = landisk_insw,
+ .mv_insl = landisk_insl,
+ .mv_outsb = landisk_outsb,
+ .mv_outsw = landisk_outsw,
+ .mv_outsl = landisk_outsl,
+ .mv_ioport_map = landisk_ioport_map,
+ .mv_init_irq = init_landisk_IRQ,
+#ifdef CONFIG_HEARTBEAT
+ .mv_heartbeat = heartbeat_landisk,
+#endif
+};
+ALIAS_MV(landisk)
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/interrupt.h>
-
#include <asm/io.h>
#include <asm/machvec.h>
#include <asm/mpc1211/mpc1211.h>
#include <asm/mpc1211/pci.h>
#include <asm/mpc1211/m1543c.h>
-
/* ALI15X3 SMBus address offsets */
#define SMBHSTSTS (0 + 0x3100)
#define SMBHSTCNT (1 + 0x3100)
#define ALI15X3_STS_TERM 0x80 /* terminated by abort */
#define ALI15X3_STS_ERR 0xE0 /* all the bad error bits */
-const char *get_system_type(void)
-{
- return "Interface MPC-1211(CTP/PCI/MPC-SH02)";
-}
-
static void __init pci_write_config(unsigned long busNo,
unsigned long devNo,
unsigned long fncNo,
return irq;
}
-void __init init_mpc1211_IRQ(void)
+static void __init init_mpc1211_IRQ(void)
{
int i;
/*
return 0;
}
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_mpc1211 __initmv = {
- .mv_nr_irqs = 48,
- .mv_irq_demux = mpc1211_irq_demux,
- .mv_init_irq = init_mpc1211_IRQ,
-
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_mpc1211,
-#endif
-};
-
-ALIAS_MV(mpc1211)
-
/* arch/sh/boards/mpc1211/rtc.c */
void mpc1211_time_init(void);
-int __init platform_setup(void)
+static void __init mpc1211_setup(char **cmdline_p)
{
unsigned char spd_buf[128];
return 0;
}
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_mpc1211 __initmv = {
+ .mv_name = "Interface MPC-1211(CTP/PCI/MPC-SH02)",
+ .mv_setup = mpc1211_setup,
+ .mv_nr_irqs = 48,
+ .mv_irq_demux = mpc1211_irq_demux,
+ .mv_init_irq = init_mpc1211_IRQ,
+
+#ifdef CONFIG_HEARTBEAT
+ .mv_heartbeat = heartbeat_mpc1211,
+#endif
+};
+ALIAS_MV(mpc1211)
* Modified for edosk7705 development
* board by S. Dunn, 2003.
*/
-
#include <linux/init.h>
#include <asm/machvec.h>
-#include <asm/machvec_init.h>
#include <asm/edosk7705/io.h>
-static void init_edosk7705(void);
+static void __init sh_edosk7705_init_irq(void)
+{
+ /* This is the Ethernet interrupt */
+ make_imask_irq(0x09);
+}
/*
* The Machine Vector
*/
-
struct sh_machine_vector mv_edosk7705 __initmv = {
+ .mv_name = "EDOSK7705",
.mv_nr_irqs = 80,
.mv_inb = sh_edosk7705_inb,
.mv_outsl = sh_edosk7705_outsl,
.mv_isa_port2addr = sh_edosk7705_isa_port2addr,
- .mv_init_irq = init_edosk7705,
+ .mv_init_irq = sh_edosk7705_init_irq,
};
ALIAS_MV(edosk7705)
-
-static void __init init_edosk7705(void)
-{
- /* This is the Ethernet interrupt */
- make_imask_irq(0x09);
-}
-
-const char *get_system_type(void)
-{
- return "EDOSK7705";
-}
-
-void __init platform_setup(void)
-{
- /* Nothing .. */
-}
-
/*
- * linux/arch/sh/kernel/setup_hs7751rvoip.c
+ * Renesas Technology Sales HS7751RVoIP Support.
*
* Copyright (C) 2000 Kazumoto Kojima
*
- * Renesas Technology Sales HS7751RVoIP Support.
- *
* Modified for HS7751RVoIP by
* Atom Create Engineering Co., Ltd. 2002.
* Lineo uSolutions, Inc. 2003.
*/
-
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/mm.h>
#include <asm/rtc.h>
#include <asm/irq.h>
-unsigned int debug_counter;
-
static void __init hs7751rvoip_init_irq(void)
{
#if defined(CONFIG_HS7751RVOIP_CODEC)
init_hs7751rvoip_IRQ();
}
-struct sh_machine_vector mv_hs7751rvoip __initmv = {
- .mv_nr_irqs = 72,
-
- .mv_inb = hs7751rvoip_inb,
- .mv_inw = hs7751rvoip_inw,
- .mv_inl = hs7751rvoip_inl,
- .mv_outb = hs7751rvoip_outb,
- .mv_outw = hs7751rvoip_outw,
- .mv_outl = hs7751rvoip_outl,
-
- .mv_inb_p = hs7751rvoip_inb_p,
- .mv_inw_p = hs7751rvoip_inw,
- .mv_inl_p = hs7751rvoip_inl,
- .mv_outb_p = hs7751rvoip_outb_p,
- .mv_outw_p = hs7751rvoip_outw,
- .mv_outl_p = hs7751rvoip_outl,
-
- .mv_insb = hs7751rvoip_insb,
- .mv_insw = hs7751rvoip_insw,
- .mv_insl = hs7751rvoip_insl,
- .mv_outsb = hs7751rvoip_outsb,
- .mv_outsw = hs7751rvoip_outsw,
- .mv_outsl = hs7751rvoip_outsl,
-
- .mv_init_irq = hs7751rvoip_init_irq,
- .mv_ioport_map = hs7751rvoip_ioport_map,
-};
-ALIAS_MV(hs7751rvoip)
-
-const char *get_system_type(void)
-{
- return "HS7751RVoIP";
-}
-
static void hs7751rvoip_power_off(void)
{
ctrl_outw(ctrl_inw(PA_OUTPORTR) & 0xffdf, PA_OUTPORTR);
}
-/*
- * Initialize the board
- */
-void __init platform_setup(void)
-{
- printk(KERN_INFO "Renesas Technology Sales HS7751RVoIP-2 support.\n");
- ctrl_outb(0xf0, PA_OUTPORTR);
- pm_power_off = hs7751rvoip_power_off;
- debug_counter = 0;
-}
-
void *area5_io8_base;
void *area6_io8_base;
void *area5_io16_base;
return 0;
}
-__initcall(hs7751rvoip_cf_init);
+/*
+ * Initialize the board
+ */
+static void __init hs7751rvoip_setup(char **cmdline_p)
+{
+ device_initcall(hs7751rvoip_cf_init);
+
+ ctrl_outb(0xf0, PA_OUTPORTR);
+ pm_power_off = hs7751rvoip_power_off;
+
+ printk(KERN_INFO "Renesas Technology Sales HS7751RVoIP-2 support.\n");
+}
+
+struct sh_machine_vector mv_hs7751rvoip __initmv = {
+ .mv_name = "HS7751RVoIP",
+ .mv_setup = hs7751rvoip_setup,
+ .mv_nr_irqs = 72,
+
+ .mv_inb = hs7751rvoip_inb,
+ .mv_inw = hs7751rvoip_inw,
+ .mv_inl = hs7751rvoip_inl,
+ .mv_outb = hs7751rvoip_outb,
+ .mv_outw = hs7751rvoip_outw,
+ .mv_outl = hs7751rvoip_outl,
+
+ .mv_inb_p = hs7751rvoip_inb_p,
+ .mv_inw_p = hs7751rvoip_inw,
+ .mv_inl_p = hs7751rvoip_inl,
+ .mv_outb_p = hs7751rvoip_outb_p,
+ .mv_outw_p = hs7751rvoip_outw,
+ .mv_outl_p = hs7751rvoip_outl,
+
+ .mv_insb = hs7751rvoip_insb,
+ .mv_insw = hs7751rvoip_insw,
+ .mv_insl = hs7751rvoip_insl,
+ .mv_outsb = hs7751rvoip_outsb,
+ .mv_outsw = hs7751rvoip_outsw,
+ .mv_outsl = hs7751rvoip_outsl,
+
+ .mv_init_irq = hs7751rvoip_init_irq,
+ .mv_ioport_map = hs7751rvoip_ioport_map,
+};
+ALIAS_MV(hs7751rvoip)
extern void heartbeat_r7780rp(void);
extern void init_r7780rp_IRQ(void);
-/*
- * The Machine Vector
- */
-struct sh_machine_vector mv_r7780rp __initmv = {
- .mv_nr_irqs = 109,
-
- .mv_inb = r7780rp_inb,
- .mv_inw = r7780rp_inw,
- .mv_inl = r7780rp_inl,
- .mv_outb = r7780rp_outb,
- .mv_outw = r7780rp_outw,
- .mv_outl = r7780rp_outl,
-
- .mv_inb_p = r7780rp_inb_p,
- .mv_inw_p = r7780rp_inw,
- .mv_inl_p = r7780rp_inl,
- .mv_outb_p = r7780rp_outb_p,
- .mv_outw_p = r7780rp_outw,
- .mv_outl_p = r7780rp_outl,
-
- .mv_insb = r7780rp_insb,
- .mv_insw = r7780rp_insw,
- .mv_insl = r7780rp_insl,
- .mv_outsb = r7780rp_outsb,
- .mv_outsw = r7780rp_outsw,
- .mv_outsl = r7780rp_outsl,
-
- .mv_ioport_map = r7780rp_ioport_map,
- .mv_init_irq = init_r7780rp_IRQ,
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_r7780rp,
-#endif
-};
-ALIAS_MV(r7780rp)
-
static struct resource m66596_usb_host_resources[] = {
[0] = {
.start = 0xa4800000,
return platform_add_devices(r7780rp_devices,
ARRAY_SIZE(r7780rp_devices));
}
-__initcall(r7780rp_devices_setup);
/*
* Platform specific clocks
&ivdr_clk,
};
-const char *get_system_type(void)
-{
- return "Highlander R7780RP-1";
-}
-
static void r7780rp_power_off(void)
{
#ifdef CONFIG_SH_R7780MP
/*
* Initialize the board
*/
-void __init platform_setup(void)
+static void __init r7780rp_setup(char **cmdline_p)
{
u16 ver = ctrl_inw(PA_VERREG);
int i;
+ device_initcall(r7780rp_devices_setup);
+
printk(KERN_INFO "Renesas Solutions Highlander R7780RP-1 support.\n");
printk(KERN_INFO "Board version: %d (revision %d), "
pm_power_off = r7780rp_power_off;
}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_r7780rp __initmv = {
+ .mv_name = "Highlander R7780RP-1",
+ .mv_setup = r7780rp_setup,
+
+ .mv_nr_irqs = 109,
+
+ .mv_inb = r7780rp_inb,
+ .mv_inw = r7780rp_inw,
+ .mv_inl = r7780rp_inl,
+ .mv_outb = r7780rp_outb,
+ .mv_outw = r7780rp_outw,
+ .mv_outl = r7780rp_outl,
+
+ .mv_inb_p = r7780rp_inb_p,
+ .mv_inw_p = r7780rp_inw,
+ .mv_inl_p = r7780rp_inl,
+ .mv_outb_p = r7780rp_outb_p,
+ .mv_outw_p = r7780rp_outw,
+ .mv_outl_p = r7780rp_outl,
+
+ .mv_insb = r7780rp_insb,
+ .mv_insw = r7780rp_insw,
+ .mv_insl = r7780rp_insl,
+ .mv_outsb = r7780rp_outsb,
+ .mv_outsw = r7780rp_outsw,
+ .mv_outsl = r7780rp_outsl,
+
+ .mv_ioport_map = r7780rp_ioport_map,
+ .mv_init_irq = init_r7780rp_IRQ,
+#ifdef CONFIG_HEARTBEAT
+ .mv_heartbeat = heartbeat_r7780rp,
+#endif
+};
+ALIAS_MV(r7780rp)
# Makefile for the RTS7751R2D specific parts of the kernel
#
-obj-y := mach.o setup.o io.o irq.o led.o
-
+obj-y := setup.o io.o irq.o
+obj-$(CONFIG_HEARTBEAT) += led.o
+++ /dev/null
-/*
- * linux/arch/sh/kernel/mach_rts7751r2d.c
- *
- * Minor tweak of mach_se.c file to reference rts7751r2d-specific items.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Machine vector for the Renesas Technology sales RTS7751R2D
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-
-#include <asm/machvec.h>
-#include <asm/rtc.h>
-#include <asm/irq.h>
-#include <asm/mach/rts7751r2d.h>
-
-extern void heartbeat_rts7751r2d(void);
-extern void init_rts7751r2d_IRQ(void);
-extern int rts7751r2d_irq_demux(int irq);
-
-extern void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t);
-extern int voyagergx_consistent_free(struct device *, size_t, void *, dma_addr_t);
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_rts7751r2d __initmv = {
- .mv_nr_irqs = 72,
-
- .mv_inb = rts7751r2d_inb,
- .mv_inw = rts7751r2d_inw,
- .mv_inl = rts7751r2d_inl,
- .mv_outb = rts7751r2d_outb,
- .mv_outw = rts7751r2d_outw,
- .mv_outl = rts7751r2d_outl,
-
- .mv_inb_p = rts7751r2d_inb_p,
- .mv_inw_p = rts7751r2d_inw,
- .mv_inl_p = rts7751r2d_inl,
- .mv_outb_p = rts7751r2d_outb_p,
- .mv_outw_p = rts7751r2d_outw,
- .mv_outl_p = rts7751r2d_outl,
-
- .mv_insb = rts7751r2d_insb,
- .mv_insw = rts7751r2d_insw,
- .mv_insl = rts7751r2d_insl,
- .mv_outsb = rts7751r2d_outsb,
- .mv_outsw = rts7751r2d_outsw,
- .mv_outsl = rts7751r2d_outsl,
-
- .mv_init_irq = init_rts7751r2d_IRQ,
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_rts7751r2d,
-#endif
- .mv_irq_demux = rts7751r2d_irq_demux,
-
-#ifdef CONFIG_USB_OHCI_HCD
- .mv_consistent_alloc = voyagergx_consistent_alloc,
- .mv_consistent_free = voyagergx_consistent_free,
-#endif
-};
-ALIAS_MV(rts7751r2d)
#include <linux/serial_8250.h>
#include <linux/pm.h>
#include <asm/io.h>
+#include <asm/machvec.h>
#include <asm/mach/rts7751r2d.h>
#include <asm/voyagergx.h>
+extern void heartbeat_rts7751r2d(void);
+extern void init_rts7751r2d_IRQ(void);
+extern int rts7751r2d_irq_demux(int irq);
+
+extern void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t);
+extern int voyagergx_consistent_free(struct device *, size_t, void *, dma_addr_t);
+
static struct plat_serial8250_port uart_platform_data[] = {
{
.membase = (void *)VOYAGER_UART_BASE,
return platform_add_devices(rts7751r2d_devices,
ARRAY_SIZE(rts7751r2d_devices));
}
-__initcall(rts7751r2d_devices_setup);
-
-const char *get_system_type(void)
-{
- return "RTS7751R2D";
-}
static void rts7751r2d_power_off(void)
{
/*
* Initialize the board
*/
-void __init platform_setup(void)
+static void __init rts7751r2d_setup(char **cmdline_p)
{
- printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n");
+ device_initcall(rts7751r2d_devices_setup);
+
ctrl_outw(0x0000, PA_OUTPORT);
pm_power_off = rts7751r2d_power_off;
voyagergx_serial_init();
+ printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n");
}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_rts7751r2d __initmv = {
+ .mv_name = "RTS7751R2D",
+ .mv_setup = rts7751r2d_setup,
+ .mv_nr_irqs = 72,
+
+ .mv_inb = rts7751r2d_inb,
+ .mv_inw = rts7751r2d_inw,
+ .mv_inl = rts7751r2d_inl,
+ .mv_outb = rts7751r2d_outb,
+ .mv_outw = rts7751r2d_outw,
+ .mv_outl = rts7751r2d_outl,
+
+ .mv_inb_p = rts7751r2d_inb_p,
+ .mv_inw_p = rts7751r2d_inw,
+ .mv_inl_p = rts7751r2d_inl,
+ .mv_outb_p = rts7751r2d_outb_p,
+ .mv_outw_p = rts7751r2d_outw,
+ .mv_outl_p = rts7751r2d_outl,
+
+ .mv_insb = rts7751r2d_insb,
+ .mv_insw = rts7751r2d_insw,
+ .mv_insl = rts7751r2d_insl,
+ .mv_outsb = rts7751r2d_outsb,
+ .mv_outsw = rts7751r2d_outsw,
+ .mv_outsl = rts7751r2d_outsl,
+
+ .mv_init_irq = init_rts7751r2d_IRQ,
+#ifdef CONFIG_HEARTBEAT
+ .mv_heartbeat = heartbeat_rts7751r2d,
+#endif
+ .mv_irq_demux = rts7751r2d_irq_demux,
+
+#ifdef CONFIG_USB_SM501
+ .mv_consistent_alloc = voyagergx_consistent_alloc,
+ .mv_consistent_free = voyagergx_consistent_free,
+#endif
+};
+ALIAS_MV(rts7751r2d)
extern void make_systemh_irq(unsigned int irq);
-const char *get_system_type(void)
-{
- return "7751 SystemH";
-}
-
/*
* Initialize IRQ setting
*/
-void __init init_7751systemh_IRQ(void)
+static void __init sh7751systemh_init_irq(void)
{
make_systemh_irq(0xb); /* Ethernet interrupt */
}
struct sh_machine_vector mv_7751systemh __initmv = {
+ .mv_name = "7751 SystemH",
.mv_nr_irqs = 72,
.mv_inb = sh7751systemh_inb,
.mv_outsw = sh7751systemh_outsw,
.mv_outsl = sh7751systemh_outsl,
- .mv_init_irq = init_7751systemh_IRQ,
+ .mv_init_irq = sh7751system_init_irq,
};
ALIAS_MV(7751systemh)
-
-int __init platform_setup(void)
-{
- return 0;
-}
-
*/
#include <linux/kernel.h>
#include <linux/init.h>
-
#include <asm/io.h>
#include <asm/machvec.h>
#include <asm/mach/io.h>
extern int saturn_irq_demux(int irq_nr);
-const char *get_system_type(void)
-{
- return "Sega Saturn";
-}
-
/*
* The Machine Vector
*/
struct sh_machine_vector mv_saturn __initmv = {
+ .mv_name = "Sega Saturn",
.mv_nr_irqs = 80, /* Fix this later */
.mv_isa_port2addr = saturn_isa_port2addr,
.mv_ioremap = saturn_ioremap,
.mv_iounmap = saturn_iounmap,
};
-
ALIAS_MV(saturn)
-
-int __init platform_setup(void)
-{
- return 0;
-}
-
void heartbeat_7300se(void);
void init_7300se_IRQ(void);
-const char *
-get_system_type(void)
-{
- return "SolutionEngine 7300";
-}
-
/*
* The Machine Vector
*/
-
struct sh_machine_vector mv_7300se __initmv = {
+ .mv_name = "SolutionEngine 7300",
.mv_nr_irqs = 109,
.mv_inb = sh7300se_inb,
.mv_inw = sh7300se_inw,
.mv_heartbeat = heartbeat_7300se,
#endif
};
-
ALIAS_MV(7300se)
-/*
- * Initialize the board
- */
-void __init
-platform_setup(void)
-{
-
-}
void heartbeat_73180se(void);
void init_73180se_IRQ(void);
-const char *
-get_system_type(void)
-{
- return "SolutionEngine 73180";
-}
-
/*
* The Machine Vector
*/
-
struct sh_machine_vector mv_73180se __initmv = {
+ .mv_name = "SolutionEngine 73180",
.mv_nr_irqs = 108,
.mv_inb = sh73180se_inb,
.mv_inw = sh73180se_inw,
.mv_heartbeat = heartbeat_73180se,
#endif
};
-
ALIAS_MV(73180se)
-/*
- * Initialize the board
- */
-void __init
-platform_setup(void)
-{
-
-}
# Makefile for the 770x SolutionEngine specific parts of the kernel
#
-obj-y := mach.o setup.o io.o irq.o
-
+obj-y := setup.o io.o irq.o
obj-$(CONFIG_HEARTBEAT) += led.o
+++ /dev/null
-/*
- * linux/arch/sh/kernel/mach_se.c
- *
- * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Machine vector for the Hitachi SolutionEngine
- */
-
-#include <linux/init.h>
-
-#include <asm/machvec.h>
-#include <asm/rtc.h>
-#include <asm/se.h>
-
-void heartbeat_se(void);
-void init_se_IRQ(void);
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_se __initmv = {
-#if defined(CONFIG_CPU_SH4)
- .mv_nr_irqs = 48,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7708)
- .mv_nr_irqs = 32,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7709)
- .mv_nr_irqs = 61,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
- .mv_nr_irqs = 86,
-#endif
-
- .mv_inb = se_inb,
- .mv_inw = se_inw,
- .mv_inl = se_inl,
- .mv_outb = se_outb,
- .mv_outw = se_outw,
- .mv_outl = se_outl,
-
- .mv_inb_p = se_inb_p,
- .mv_inw_p = se_inw,
- .mv_inl_p = se_inl,
- .mv_outb_p = se_outb_p,
- .mv_outw_p = se_outw,
- .mv_outl_p = se_outl,
-
- .mv_insb = se_insb,
- .mv_insw = se_insw,
- .mv_insl = se_insl,
- .mv_outsb = se_outsb,
- .mv_outsw = se_outsw,
- .mv_outsl = se_outsl,
-
- .mv_init_irq = init_se_IRQ,
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_se,
-#endif
-};
-ALIAS_MV(se)
* Hitachi SolutionEngine Support.
*
*/
-
#include <linux/init.h>
#include <linux/irq.h>
-
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <asm/io.h>
#include <asm/se.h>
#include <asm/smc37c93x.h>
+#include <asm/machvec.h>
+
+void heartbeat_se(void);
+void init_se_IRQ(void);
/*
* Configure the Super I/O chip
outb_p(data, DATA_PORT);
}
-static void __init init_smsc(void)
+/* XXX: Another candidate for a more generic cchip machine vector */
+static void __init smsc_setup(char **cmdline_p)
{
outb_p(CONFIG_ENTER, CONFIG_PORT);
outb_p(CONFIG_ENTER, CONFIG_PORT);
outb_p(CONFIG_EXIT, CONFIG_PORT);
}
-const char *get_system_type(void)
-{
- return "SolutionEngine";
-}
-
/*
- * Initialize the board
+ * The Machine Vector
*/
-void __init platform_setup(void)
-{
- init_smsc();
- /* XXX: RTC setting comes here */
-}
+struct sh_machine_vector mv_se __initmv = {
+ .mv_name = "SolutionEngine",
+ .mv_setup = smsc_setup,
+#if defined(CONFIG_CPU_SH4)
+ .mv_nr_irqs = 48,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7708)
+ .mv_nr_irqs = 32,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7709)
+ .mv_nr_irqs = 61,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+ .mv_nr_irqs = 86,
+#endif
+
+ .mv_inb = se_inb,
+ .mv_inw = se_inw,
+ .mv_inl = se_inl,
+ .mv_outb = se_outb,
+ .mv_outw = se_outw,
+ .mv_outl = se_outl,
+
+ .mv_inb_p = se_inb_p,
+ .mv_inw_p = se_inw,
+ .mv_inl_p = se_inl,
+ .mv_outb_p = se_outb_p,
+ .mv_outw_p = se_outw,
+ .mv_outl_p = se_outl,
+
+ .mv_insb = se_insb,
+ .mv_insw = se_insw,
+ .mv_insl = se_insl,
+ .mv_outsb = se_outsb,
+ .mv_outsw = se_outsw,
+ .mv_outsl = se_outsl,
+
+ .mv_init_irq = init_se_IRQ,
+#ifdef CONFIG_HEARTBEAT
+ .mv_heartbeat = heartbeat_se,
+#endif
+};
+ALIAS_MV(se)
# Makefile for the 7751 SolutionEngine specific parts of the kernel
#
-obj-y := mach.o setup.o io.o irq.o
+obj-y := setup.o io.o irq.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_HEARTBEAT) += led.o
-
+++ /dev/null
-/*
- * linux/arch/sh/kernel/mach_7751se.c
- *
- * Minor tweak of mach_se.c file to reference 7751se-specific items.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Machine vector for the Hitachi 7751 SolutionEngine
- */
-
-#include <linux/init.h>
-#include <asm/machvec.h>
-#include <asm/se7751.h>
-
-void heartbeat_7751se(void);
-void init_7751se_IRQ(void);
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_7751se __initmv = {
- .mv_nr_irqs = 72,
-
- .mv_inb = sh7751se_inb,
- .mv_inw = sh7751se_inw,
- .mv_inl = sh7751se_inl,
- .mv_outb = sh7751se_outb,
- .mv_outw = sh7751se_outw,
- .mv_outl = sh7751se_outl,
-
- .mv_inb_p = sh7751se_inb_p,
- .mv_inw_p = sh7751se_inw,
- .mv_inl_p = sh7751se_inl,
- .mv_outb_p = sh7751se_outb_p,
- .mv_outw_p = sh7751se_outw,
- .mv_outl_p = sh7751se_outl,
-
- .mv_insl = sh7751se_insl,
- .mv_outsl = sh7751se_outsl,
-
- .mv_init_irq = init_7751se_IRQ,
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_7751se,
-#endif
-};
-ALIAS_MV(7751se)
#include <asm/io.h>
#include <asm/se7751.h>
-#ifdef CONFIG_SH_KGDB
-#include <asm/kgdb.h>
-#endif
-
-/*
- * Configure the Super I/O chip
- */
-#if 0
-/* Leftover code from regular Solution Engine, for reference. */
-/* The SH7751 Solution Engine has a different SuperIO. */
-static void __init smsc_config(int index, int data)
-{
- outb_p(index, INDEX_PORT);
- outb_p(data, DATA_PORT);
-}
-
-static void __init init_smsc(void)
-{
- outb_p(CONFIG_ENTER, CONFIG_PORT);
- outb_p(CONFIG_ENTER, CONFIG_PORT);
-
- /* FDC */
- smsc_config(CURRENT_LDN_INDEX, LDN_FDC);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */
-
- /* IDE1 */
- smsc_config(CURRENT_LDN_INDEX, LDN_IDE1);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IRQ_SELECT_INDEX, 14); /* IRQ14 */
-
- /* AUXIO (GPIO): to use IDE1 */
- smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO);
- smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */
- smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */
-
- /* COM1 */
- smsc_config(CURRENT_LDN_INDEX, LDN_COM1);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IO_BASE_HI_INDEX, 0x03);
- smsc_config(IO_BASE_LO_INDEX, 0xf8);
- smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */
-
- /* COM2 */
- smsc_config(CURRENT_LDN_INDEX, LDN_COM2);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IO_BASE_HI_INDEX, 0x02);
- smsc_config(IO_BASE_LO_INDEX, 0xf8);
- smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */
-
- /* RTC */
- smsc_config(CURRENT_LDN_INDEX, LDN_RTC);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */
-
- /* XXX: PARPORT, KBD, and MOUSE will come here... */
- outb_p(CONFIG_EXIT, CONFIG_PORT);
-}
-#endif
-
-const char *get_system_type(void)
-{
- return "7751 SolutionEngine";
-}
+void heartbeat_7751se(void);
+void init_7751se_IRQ(void);
#ifdef CONFIG_SH_KGDB
+#include <asm/kgdb.h>
static int kgdb_uart_setup(void);
static struct kgdb_sermap kgdb_uart_sermap =
{ "ttyS", 0, kgdb_uart_setup, NULL };
/*
* Initialize the board
*/
-void __init platform_setup(void)
+static void __init sh7751se_setup(char **cmdline_p)
{
/* Call init_smsc() replacement to set up SuperIO. */
/* XXX: RTC setting comes here */
return 0;
}
#endif /* CONFIG_SH_KGDB */
+
+
+/*
+ * The Machine Vector
+ */
+
+struct sh_machine_vector mv_7751se __initmv = {
+ .mv_name = "7751 SolutionEngine",
+ .mv_setup = sh7751se_setup,
+ .mv_nr_irqs = 72,
+
+ .mv_inb = sh7751se_inb,
+ .mv_inw = sh7751se_inw,
+ .mv_inl = sh7751se_inl,
+ .mv_outb = sh7751se_outb,
+ .mv_outw = sh7751se_outw,
+ .mv_outl = sh7751se_outl,
+
+ .mv_inb_p = sh7751se_inb_p,
+ .mv_inw_p = sh7751se_inw,
+ .mv_inl_p = sh7751se_inl,
+ .mv_outb_p = sh7751se_outb_p,
+ .mv_outw_p = sh7751se_outw,
+ .mv_outl_p = sh7751se_outl,
+
+ .mv_insl = sh7751se_insl,
+ .mv_outsl = sh7751se_outsl,
+
+ .mv_init_irq = init_7751se_IRQ,
+#ifdef CONFIG_HEARTBEAT
+ .mv_heartbeat = heartbeat_7751se,
+#endif
+};
+ALIAS_MV(7751se)
#include <asm/sh03/sh03.h>
#include <asm/addrspace.h>
-const char *get_system_type(void)
-{
- return "Interface (CTP/PCI-SH03)";
-}
-
-static void init_sh03_IRQ(void)
+static void __init init_sh03_IRQ(void)
{
ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
return (void __iomem *)(port + PCI_IO_BASE);
}
+/* arch/sh/boards/sh03/rtc.c */
+void sh03_time_init(void);
+
+static void __init sh03_setup(char **cmdline_p)
+{
+ board_time_init = sh03_time_init;
+}
+
struct sh_machine_vector mv_sh03 __initmv = {
+ .mv_name = "Interface (CTP/PCI-SH03)",
+ .mv_setup = sh03_setup,
.mv_nr_irqs = 48,
.mv_ioport_map = sh03_ioport_map,
.mv_init_irq = init_sh03_IRQ,
#endif
};
ALIAS_MV(sh03)
-
-/* arch/sh/boards/sh03/rtc.c */
-void sh03_time_init(void);
-
-int __init platform_setup(void)
-{
- board_time_init = sh03_time_init;
- return 0;
-}
#define PFC_PHCR 0xa400010e
-const char *get_system_type(void)
-{
- return "SHMIN";
-}
-
static void __init init_shmin_irq(void)
{
ctrl_outw(0x2a00, PFC_PHCR); // IRQ0-3=IRQ
ctrl_outw(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active.
}
-void __init platform_setup(void)
-{
-}
-
static void __iomem *shmin_ioport_map(unsigned long port, unsigned int size)
{
static int dummy;
}
struct sh_machine_vector mv_shmin __initmv = {
+ .mv_name = "SHMIN",
.mv_init_irq = init_shmin_irq,
.mv_ioport_map = shmin_ioport_map,
};
make_ipr_irq(IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY);
}
-const char *get_system_type(void)
+/*
+ * Initialize the board
+ */
+static void __init snapgear_setup(char **cmdline_p)
{
- return "SnapGear SecureEdge5410";
+ board_time_init = secureedge5410_rtc_init;
}
/*
* The Machine Vector
*/
-
struct sh_machine_vector mv_snapgear __initmv = {
+ .mv_name = "SnapGear SecureEdge5410",
+ .mv_setup = snapgear_setup,
.mv_nr_irqs = 72,
.mv_inb = snapgear_inb,
.mv_init_irq = init_snapgear_IRQ,
};
ALIAS_MV(snapgear)
-
-/*
- * Initialize the board
- */
-
-int __init platform_setup(void)
-{
- board_time_init = secureedge5410_rtc_init;
-
- return 0;
-}
-
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*/
-
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ioport.h>
extern void microdev_heartbeat(void);
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_sh4202_microdev __initmv = {
- .mv_nr_irqs = 72, /* QQQ need to check this - use the MACRO */
-
- .mv_inb = microdev_inb,
- .mv_inw = microdev_inw,
- .mv_inl = microdev_inl,
- .mv_outb = microdev_outb,
- .mv_outw = microdev_outw,
- .mv_outl = microdev_outl,
-
- .mv_inb_p = microdev_inb_p,
- .mv_inw_p = microdev_inw_p,
- .mv_inl_p = microdev_inl_p,
- .mv_outb_p = microdev_outb_p,
- .mv_outw_p = microdev_outw_p,
- .mv_outl_p = microdev_outl_p,
-
- .mv_insb = microdev_insb,
- .mv_insw = microdev_insw,
- .mv_insl = microdev_insl,
- .mv_outsb = microdev_outsb,
- .mv_outsw = microdev_outsw,
- .mv_outsl = microdev_outsl,
-
- .mv_init_irq = init_microdev_irq,
-
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = microdev_heartbeat,
-#endif
-};
-ALIAS_MV(sh4202_microdev)
/****************************************************************************/
/* assume a Keyboard Controller is present */
int microdev_kbd_controller_present = 1;
-const char *get_system_type(void)
-{
- return "SH4-202 MicroDev";
-}
-
static struct resource smc91x_resources[] = {
[0] = {
.start = 0x300,
return platform_add_devices(microdev_devices, ARRAY_SIZE(microdev_devices));
}
-__initcall(microdev_devices_setup);
-
-void __init platform_setup(void)
-{
- int * const fpgaRevisionRegister = (int*)(MICRODEV_FPGA_GP_BASE + 0x8ul);
- const int fpgaRevision = *fpgaRevisionRegister;
- int * const CacheControlRegister = (int*)CCR;
-
- printk("SuperH %s board (FPGA rev: 0x%0x, CCR: 0x%0x)\n",
- get_system_type(), fpgaRevision, *CacheControlRegister);
-}
-
-
-/****************************************************************************/
-
-
- /*
- * Setup for the SMSC FDC37C93xAPM
- */
+/*
+ * Setup for the SMSC FDC37C93xAPM
+ */
static int __init smsc_superio_setup(void)
{
return 0;
}
+static void __init microdev_setup(char **cmdline_p)
+{
+ int * const fpgaRevisionRegister = (int*)(MICRODEV_FPGA_GP_BASE + 0x8ul);
+ const int fpgaRevision = *fpgaRevisionRegister;
+ int * const CacheControlRegister = (int*)CCR;
+
+ device_initcall(microdev_devices_setup);
+ device_initcall(smsc_superio_setup);
-/* This is grotty, but, because kernel is always referenced on the link line
- * before any devices, this is safe.
+ printk("SuperH %s board (FPGA rev: 0x%0x, CCR: 0x%0x)\n",
+ get_system_type(), fpgaRevision, *CacheControlRegister);
+}
+
+/*
+ * The Machine Vector
*/
-__initcall(smsc_superio_setup);
+struct sh_machine_vector mv_sh4202_microdev __initmv = {
+ .mv_name = "SH4-202 MicroDev",
+ .mv_setup = microdev_setup,
+ .mv_nr_irqs = 72, /* QQQ need to check this - use the MACRO */
+
+ .mv_inb = microdev_inb,
+ .mv_inw = microdev_inw,
+ .mv_inl = microdev_inl,
+ .mv_outb = microdev_outb,
+ .mv_outw = microdev_outw,
+ .mv_outl = microdev_outl,
+
+ .mv_inb_p = microdev_inb_p,
+ .mv_inw_p = microdev_inw_p,
+ .mv_inl_p = microdev_inl_p,
+ .mv_outb_p = microdev_outb_p,
+ .mv_outw_p = microdev_outw_p,
+ .mv_outl_p = microdev_outl_p,
+
+ .mv_insb = microdev_insb,
+ .mv_insw = microdev_insw,
+ .mv_insl = microdev_insl,
+ .mv_outsb = microdev_outsb,
+ .mv_outsw = microdev_outsw,
+ .mv_outsl = microdev_outsl,
+
+ .mv_init_irq = init_microdev_irq,
+
+#ifdef CONFIG_HEARTBEAT
+ .mv_heartbeat = microdev_heartbeat,
+#endif
+};
+ALIAS_MV(sh4202_microdev)
make_ipr_irq( TITAN_IRQ_USB, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY); /* PCIRQ3 */
}
-const char *get_system_type(void)
-{
- return "Titan";
-}
-
-int __init platform_setup(void)
-{
- printk("%s Platform Setup\n", get_system_type());
- return 0;
-}
-
struct sh_machine_vector mv_titan __initmv = {
- .mv_nr_irqs = NR_IRQS,
+ .mv_name = "Titan",
.mv_inb = titan_inb,
.mv_inw = titan_inw,
*/
#include <linux/init.h>
#include <asm/machvec.h>
-#include <asm/irq.h>
struct sh_machine_vector mv_unknown __initmv = {
- .mv_nr_irqs = NR_IRQS,
+ .mv_name = "Unknown",
};
ALIAS_MV(unknown)
-
-const char *get_system_type(void)
-{
- return "Unknown";
-}
-
-void __init platform_setup(void)
-{
-}
-
* The bigger value means no problem.
*/
struct sh_cpuinfo boot_cpu_data = { CPU_SH_NONE, 10000000, };
+#ifdef CONFIG_VT
struct screen_info screen_info;
+#endif
#if defined(CONFIG_SH_UNKNOWN)
struct sh_machine_vector sh_mv;
#endif
-/* We need this to satisfy some external references. */
-struct screen_info screen_info = {
- 0, 25, /* orig-x, orig-y */
- 0, /* unused */
- 0, /* orig-video-page */
- 0, /* orig-video-mode */
- 80, /* orig-video-cols */
- 0,0,0, /* ega_ax, ega_bx, ega_cx */
- 25, /* orig-video-lines */
- 0, /* orig-video-isVGA */
- 16 /* orig-video-points */
-};
-
-extern void platform_setup(void);
-extern char *get_system_type(void);
extern int root_mountflags;
#define MV_NAME_SIZE 32
static char command_line[COMMAND_LINE_SIZE] = { 0, };
-struct resource standard_io_resources[] = {
- { "dma1", 0x00, 0x1f },
- { "pic1", 0x20, 0x3f },
- { "timer", 0x40, 0x5f },
- { "keyboard", 0x60, 0x6f },
- { "dma page reg", 0x80, 0x8f },
- { "pic2", 0xa0, 0xbf },
- { "dma2", 0xc0, 0xdf },
- { "fpu", 0xf0, 0xff }
-};
-
-#define STANDARD_IO_RESOURCES (sizeof(standard_io_resources)/sizeof(struct resource))
-
-/* System RAM - interrupted by the 640kB-1M hole */
-#define code_resource (ram_resources[3])
-#define data_resource (ram_resources[4])
-static struct resource ram_resources[] = {
- { "System RAM", 0x000000, 0x09ffff, IORESOURCE_BUSY },
- { "System RAM", 0x100000, 0x100000, IORESOURCE_BUSY },
- { "Video RAM area", 0x0a0000, 0x0bffff },
- { "Kernel code", 0x100000, 0 },
- { "Kernel data", 0, 0 }
-};
+static struct resource code_resource = { .name = "Kernel code", };
+static struct resource data_resource = { .name = "Kernel data", };
unsigned long memory_start, memory_end;
__set_io_port_base(mv_io_base);
#endif
+ if (!sh_mv.mv_nr_irqs)
+ sh_mv.mv_nr_irqs = NR_IRQS;
+
return 0;
}
unsigned long bootmap_size;
unsigned long start_pfn, max_pfn, max_low_pfn;
-
#ifdef CONFIG_CMDLINE_BOOL
strcpy(COMMAND_LINE, CONFIG_CMDLINE);
#endif
#endif
/* Perform the machine specific initialisation */
- platform_setup();
+ if (likely(sh_mv.mv_setup))
+ sh_mv.mv_setup(cmdline_p);
paging_init();
}
struct sh_machine_vector* __init get_mv_byname(const char* name)
{
- extern int strcasecmp(const char *, const char *);
extern long __machvec_start, __machvec_end;
struct sh_machine_vector *all_vecs =
(struct sh_machine_vector *)&__machvec_start;
seq_printf(m, "\n");
}
-static void show_cacheinfo(struct seq_file *m, const char *type, struct cache_info info)
+static void show_cacheinfo(struct seq_file *m, const char *type,
+ struct cache_info info)
{
unsigned int cache_size;
}
__setup("kgdb=", kgdb_parse_options);
#endif /* CONFIG_SH_KGDB */
-
*/
#ifndef _ASM_SH_MACHVEC_H
-#define _ASM_SH_MACHVEC_H 1
+#define _ASM_SH_MACHVEC_H
#include <linux/types.h>
#include <linux/time.h>
-
#include <asm/machtypes.h>
#include <asm/machvec_init.h>
struct device;
struct sh_machine_vector {
+ void (*mv_setup)(char **cmdline_p);
+ const char *mv_name;
int mv_nr_irqs;
u8 (*mv_inb)(unsigned long);
extern struct sh_machine_vector sh_mv;
+#define get_system_type() sh_mv.mv_name
+
#endif /* _ASM_SH_MACHVEC_H */
projects / linux-drm-fsl-dcu.git / commitdiff