drm/exynos: fimd: modify I80 i/f irq relevant routine
authorYoungJun Cho <yj44.cho@samsung.com>
Mon, 17 Nov 2014 13:00:12 +0000 (22:00 +0900)
committerInki Dae <inki.dae@samsung.com>
Mon, 24 Nov 2014 09:02:53 +0000 (18:02 +0900)
For the I80 interface, the video interrupt pending register(VIDINTCON1)
should be handled in fimd_irq_handler() and the video interrupt control
register(VIDINTCON0) should be handled in fimd_enable_vblank() and
fimd_disable_vblank() like RGB interface.
So this patch moves each set / unset routines into proper positions.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
drivers/gpu/drm/exynos/exynos_drm_fimd.c

index fd7b46959903f30b9dd50d610c5000df3595669d..3c632370e9831f7aebee9e336296106d26d83a33 100644 (file)
@@ -469,12 +469,19 @@ static int fimd_enable_vblank(struct exynos_drm_manager *mgr)
                val = readl(ctx->regs + VIDINTCON0);
 
                val |= VIDINTCON0_INT_ENABLE;
-               val |= VIDINTCON0_INT_FRAME;
 
-               val &= ~VIDINTCON0_FRAMESEL0_MASK;
-               val |= VIDINTCON0_FRAMESEL0_VSYNC;
-               val &= ~VIDINTCON0_FRAMESEL1_MASK;
-               val |= VIDINTCON0_FRAMESEL1_NONE;
+               if (ctx->i80_if) {
+                       val |= VIDINTCON0_INT_I80IFDONE;
+                       val |= VIDINTCON0_INT_SYSMAINCON;
+                       val &= ~VIDINTCON0_INT_SYSSUBCON;
+               } else {
+                       val |= VIDINTCON0_INT_FRAME;
+
+                       val &= ~VIDINTCON0_FRAMESEL0_MASK;
+                       val |= VIDINTCON0_FRAMESEL0_VSYNC;
+                       val &= ~VIDINTCON0_FRAMESEL1_MASK;
+                       val |= VIDINTCON0_FRAMESEL1_NONE;
+               }
 
                writel(val, ctx->regs + VIDINTCON0);
        }
@@ -493,9 +500,15 @@ static void fimd_disable_vblank(struct exynos_drm_manager *mgr)
        if (test_and_clear_bit(0, &ctx->irq_flags)) {
                val = readl(ctx->regs + VIDINTCON0);
 
-               val &= ~VIDINTCON0_INT_FRAME;
                val &= ~VIDINTCON0_INT_ENABLE;
 
+               if (ctx->i80_if) {
+                       val &= ~VIDINTCON0_INT_I80IFDONE;
+                       val &= ~VIDINTCON0_INT_SYSMAINCON;
+                       val &= ~VIDINTCON0_INT_SYSSUBCON;
+               } else
+                       val &= ~VIDINTCON0_INT_FRAME;
+
                writel(val, ctx->regs + VIDINTCON0);
        }
 }
@@ -959,19 +972,15 @@ static void fimd_trigger(struct device *dev)
        u32 reg;
 
         /*
-        * Skips to trigger if in triggering state, because multiple triggering
-        * requests can cause panel reset.
-        */
+         * Skips triggering if in triggering state, because multiple triggering
+         * requests can cause panel reset.
+         */
        if (atomic_read(&ctx->triggering))
                return;
 
+       /* Enters triggering mode */
        atomic_set(&ctx->triggering, 1);
 
-       reg = readl(ctx->regs + VIDINTCON0);
-       reg |= (VIDINTCON0_INT_ENABLE | VIDINTCON0_INT_I80IFDONE |
-                                               VIDINTCON0_INT_SYSMAINCON);
-       writel(reg, ctx->regs + VIDINTCON0);
-
        reg = readl(timing_base + TRIGCON);
        reg |= (TRGMODE_I80_RGB_ENABLE_I80 | SWTRGCMD_I80_RGB_ENABLE);
        writel(reg, timing_base + TRIGCON);
@@ -1036,21 +1045,13 @@ static irqreturn_t fimd_irq_handler(int irq, void *dev_id)
        if (ctx->pipe < 0 || !ctx->drm_dev)
                goto out;
 
-       if (ctx->i80_if) {
-               /* unset I80 frame done interrupt */
-               val = readl(ctx->regs + VIDINTCON0);
-               val &= ~(VIDINTCON0_INT_I80IFDONE | VIDINTCON0_INT_SYSMAINCON);
-               writel(val, ctx->regs + VIDINTCON0);
+       drm_handle_vblank(ctx->drm_dev, ctx->pipe);
+       exynos_drm_crtc_finish_pageflip(ctx->drm_dev, ctx->pipe);
 
-               /* exit triggering mode */
+       if (ctx->i80_if) {
+               /* Exits triggering mode */
                atomic_set(&ctx->triggering, 0);
-
-               drm_handle_vblank(ctx->drm_dev, ctx->pipe);
-               exynos_drm_crtc_finish_pageflip(ctx->drm_dev, ctx->pipe);
        } else {
-               drm_handle_vblank(ctx->drm_dev, ctx->pipe);
-               exynos_drm_crtc_finish_pageflip(ctx->drm_dev, ctx->pipe);
-
                /* set wait vsync event to zero and wake up queue. */
                if (atomic_read(&ctx->wait_vsync_event)) {
                        atomic_set(&ctx->wait_vsync_event, 0);