ARM: dts: imx23-olinuxino: Use pinctrl for gpio-led

Since commit 8fe4554f (leds: leds-gpio: adopt pinctrl support) gpio-led driver
has pinctrl support, so setup the gpio led pin via pinctrl and avoid the
following warning:

leds-gpio leds.5: pins are not configured from the driver

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index 35489a1db77f510e74004824998fc9b114804e59..8bd56fc7e194d0059578816efcc201807888cca7 100644 (file)
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -40,6 +40,15 @@
                                        reg = <0>;
                                        fsl,pinmux-ids = <
                                                0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
+                                       >;
+                                       fsl,drive-strength = <0>;
+                                       fsl,voltage = <1>;
+                                       fsl,pull-up = <0>;
+                               };
+
+                               led_pin_gpio0_17: led_gpio0_17@0 {
+                                       reg = <0>;
+                                       fsl,pinmux-ids = <
                                                0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
                                        >;
                                        fsl,drive-strength = <0>;
@@ -91,6 +100,8 @@
 
        leds {
                compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&led_pin_gpio0_17>;
 
                user {
                        label = "green";