struct pci_bus *ibmphp_pci_bus;
static int max_slots;
-static int irqs[16]; /* PIC mode IRQ's we're using so far (in case MPS
+static int irqs[16]; /* PIC mode IRQs we're using so far (in case MPS
* tables don't provide default info for empty slots */
static int init_flag;
return get_max_adapter_speed_1 (hs, value, 1);
}
*/
-static inline int get_cur_bus_info(struct slot **sl)
+static inline int get_cur_bus_info(struct slot **sl)
{
int rc = 1;
struct slot * slot_cur = *sl;
debug("options = %x\n", slot_cur->ctrl->options);
- debug("revision = %x\n", slot_cur->ctrl->revision);
+ debug("revision = %x\n", slot_cur->ctrl->revision);
- if (READ_BUS_STATUS(slot_cur->ctrl))
+ if (READ_BUS_STATUS(slot_cur->ctrl))
rc = ibmphp_hpc_readslot(slot_cur, READ_BUSSTATUS, NULL);
-
- if (rc)
+
+ if (rc)
return rc;
-
+
slot_cur->bus_on->current_speed = CURRENT_BUS_SPEED(slot_cur->busstatus);
if (READ_BUS_MODE(slot_cur->ctrl))
slot_cur->bus_on->current_bus_mode =
slot_cur->busstatus,
slot_cur->bus_on->current_speed,
slot_cur->bus_on->current_bus_mode);
-
+
*sl = slot_cur;
return 0;
}
static inline int slot_update(struct slot **sl)
{
int rc;
- rc = ibmphp_hpc_readslot(*sl, READ_ALLSTAT, NULL);
- if (rc)
+ rc = ibmphp_hpc_readslot(*sl, READ_ALLSTAT, NULL);
+ if (rc)
return rc;
if (!init_flag)
rc = get_cur_bus_info(sl);
debug("(*cur_slot)->irq[3] = %x\n",
(*cur_slot)->irq[3]);
- debug("rtable->exlusive_irqs = %x\n",
+ debug("rtable->exclusive_irqs = %x\n",
rtable->exclusive_irqs);
debug("rtable->slots[loop].irq[0].bitmap = %x\n",
rtable->slots[loop].irq[0].bitmap);
else
rc = -ENODEV;
}
- } else
+ } else
rc = -ENODEV;
ibmphp_unlock_operations();
debug("get_attention_status - Entry hotplug_slot[%lx] pvalue[%lx]\n",
(ulong) hotplug_slot, (ulong) value);
-
+
ibmphp_lock_operations();
if (hotplug_slot) {
pslot = hotplug_slot->private;
ibmphp_lock_operations();
mode = slot->supported_bus_mode;
- speed = slot->supported_speed;
+ speed = slot->supported_speed;
ibmphp_unlock_operations();
switch (speed) {
case BUS_SPEED_33:
break;
case BUS_SPEED_66:
- if (mode == BUS_MODE_PCIX)
+ if (mode == BUS_MODE_PCIX)
speed += 0x01;
break;
case BUS_SPEED_100:
debug("BEFORE GETTING SLOT STATUS, slot # %x\n",
slot_cur->number);
- if (slot_cur->ctrl->revision == 0xFF)
+ if (slot_cur->ctrl->revision == 0xFF)
if (get_ctrl_revision(slot_cur,
&slot_cur->ctrl->revision))
return -1;
- if (slot_cur->bus_on->current_speed == 0xFF)
- if (get_cur_bus_info(&slot_cur))
+ if (slot_cur->bus_on->current_speed == 0xFF)
+ if (get_cur_bus_info(&slot_cur))
return -1;
get_max_bus_speed(slot_cur);
debug("SLOT_PRESENT = %x\n", SLOT_PRESENT(slot_cur->status));
debug("SLOT_LATCH = %x\n", SLOT_LATCH(slot_cur->status));
- if ((SLOT_PWRGD(slot_cur->status)) &&
- !(SLOT_PRESENT(slot_cur->status)) &&
+ if ((SLOT_PWRGD(slot_cur->status)) &&
+ !(SLOT_PRESENT(slot_cur->status)) &&
!(SLOT_LATCH(slot_cur->status))) {
debug("BEFORE POWER OFF COMMAND\n");
rc = power_off(slot_cur);
switch (opn) {
case ENABLE:
- if (!(SLOT_PWRGD(slot_cur->status)) &&
- (SLOT_PRESENT(slot_cur->status)) &&
+ if (!(SLOT_PWRGD(slot_cur->status)) &&
+ (SLOT_PRESENT(slot_cur->status)) &&
!(SLOT_LATCH(slot_cur->status)))
return 0;
break;
case DISABLE:
- if ((SLOT_PWRGD(slot_cur->status)) &&
+ if ((SLOT_PWRGD(slot_cur->status)) &&
(SLOT_PRESENT(slot_cur->status)) &&
!(SLOT_LATCH(slot_cur->status)))
return 0;
err("out of system memory\n");
return -ENOMEM;
}
-
+
info->power_status = SLOT_PWRGD(slot_cur->status);
info->attention_status = SLOT_ATTN(slot_cur->status,
slot_cur->ext_status);
case BUS_SPEED_33:
break;
case BUS_SPEED_66:
- if (mode == BUS_MODE_PCIX)
+ if (mode == BUS_MODE_PCIX)
bus_speed += 0x01;
else if (mode == BUS_MODE_PCI)
;
}
bus->cur_bus_speed = bus_speed;
- // To do: bus_names
-
+ // To do: bus_names
+
rc = pci_hp_change_slot_info(slot_cur->hotplug_slot, info);
kfree(info);
return rc;
}
/*
- * The following function is to fix kernel bug regarding
- * getting bus entries, here we manually add those primary
+ * The following function is to fix kernel bug regarding
+ * getting bus entries, here we manually add those primary
* bus entries to kernel bus structure whenever apply
*/
static u8 bus_structure_fixup(u8 busno)
}
/*******************************************************
- * Returns whether the bus is empty or not
+ * Returns whether the bus is empty or not
*******************************************************/
static int is_bus_empty(struct slot * slot_cur)
{
}
/***********************************************************
- * If the HPC permits and the bus currently empty, tries to set the
+ * If the HPC permits and the bus currently empty, tries to set the
* bus speed and mode at the maximum card and bus capability
* Parameters: slot
* Returns: bus is set (0) or error code
static struct pci_device_id ciobx[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, 0x0101) },
{ },
- };
+ };
debug("%s - entry slot # %d\n", __func__, slot_cur->number);
if (SET_BUS_STATUS(slot_cur->ctrl) && is_bus_empty(slot_cur)) {
else if (!SLOT_BUS_MODE(slot_cur->ext_status))
/* if max slot/bus capability is 66 pci
and there's no bus mode mismatch, then
- the adapter supports 66 pci */
+ the adapter supports 66 pci */
cmd = HPC_BUS_66CONVMODE;
else
cmd = HPC_BUS_33CONVMODE;
return -EIO;
}
}
- /* This is for x440, once Brandon fixes the firmware,
+ /* This is for x440, once Brandon fixes the firmware,
will not need this delay */
msleep(1000);
debug("%s -Exit\n", __func__);
}
/* This routine checks the bus limitations that the slot is on from the BIOS.
- * This is used in deciding whether or not to power up the slot.
+ * This is used in deciding whether or not to power up the slot.
* (electrical/spec limitations. For example, >1 133 MHz or >2 66 PCI cards on
- * same bus)
+ * same bus)
* Parameters: slot
* Returns: 0 = no limitations, -EINVAL = exceeded limitations on the bus
*/
static inline void print_card_capability(struct slot *slot_cur)
{
info("capability of the card is ");
- if ((slot_cur->ext_status & CARD_INFO) == PCIX133)
+ if ((slot_cur->ext_status & CARD_INFO) == PCIX133)
info(" 133 MHz PCI-X\n");
else if ((slot_cur->ext_status & CARD_INFO) == PCIX66)
info(" 66 MHz PCI-X\n");
}
attn_LED_blink(slot_cur);
-
+
rc = set_bus(slot_cur);
if (rc) {
err("was not able to set the bus\n");
rc = slot_update(&slot_cur);
if (rc)
goto error_power;
-
+
rc = -EINVAL;
if (SLOT_POWER(slot_cur->status) && !(SLOT_PWRGD(slot_cur->status))) {
err("power fault occurred trying to power up...\n");
"speed and card capability\n");
print_card_capability(slot_cur);
goto error_power;
- }
+ }
/* Don't think this case will happen after above checks...
* but just in case, for paranoia sake */
if (!(SLOT_POWER(slot_cur->status))) {
ibmphp_print_test();
rc = ibmphp_update_slot_info(slot_cur);
exit:
- ibmphp_unlock_operations();
+ ibmphp_unlock_operations();
return rc;
error_nopower:
{
struct slot *slot = hotplug_slot->private;
int rc;
-
+
ibmphp_lock_operations();
rc = ibmphp_do_disable_slot(slot);
ibmphp_unlock_operations();
int rc;
u8 flag;
- debug("DISABLING SLOT...\n");
-
+ debug("DISABLING SLOT...\n");
+
if ((slot_cur == NULL) || (slot_cur->ctrl == NULL)) {
return -ENODEV;
}
-
+
flag = slot_cur->flag;
slot_cur->flag = 1;
attn_LED_blink(slot_cur);
if (slot_cur->func == NULL) {
- /* We need this for fncs's that were there on bootup */
+ /* We need this for functions that were there on bootup */
slot_cur->func = kzalloc(sizeof(struct pci_func), GFP_KERNEL);
if (!slot_cur->func) {
err("out of system memory\n");
}
ibm_unconfigure_device(slot_cur->func);
-
- /* If we got here from latch suddenly opening on operating card or
- a power fault, there's no power to the card, so cannot
- read from it to determine what resources it occupied. This operation
- is forbidden anyhow. The best we can do is remove it from kernel
- lists at least */
+
+ /*
+ * If we got here from latch suddenly opening on operating card or
+ * a power fault, there's no power to the card, so cannot
+ * read from it to determine what resources it occupied. This operation
+ * is forbidden anyhow. The best we can do is remove it from kernel
+ * lists at least */
if (!flag) {
attn_off(slot_cur);
rc = -EFAULT;
goto exit;
}
- if (flag)
+ if (flag)
ibmphp_update_slot_info(slot_cur);
goto exit;
}
debug("AFTER Resource & EBDA INITIALIZATIONS\n");
max_slots = get_max_slots();
-
+
if ((rc = ibmphp_register_pci()))
goto error;
projects / linux-drm-fsl-dcu.git / blobdiff