mutex_unlock(&dev_priv->dev->struct_mutex);
}
+
+/**
+ * ivybridge_parity_work - Workqueue called when a parity error interrupt
+ * occurred.
+ * @work: workqueue struct
+ *
+ * Doesn't actually do anything except notify userspace. As a consequence of
+ * this event, userspace should try to remap the bad rows since statistically
+ * it is likely the same row is more likely to go bad again.
+ */
+static void ivybridge_parity_work(struct work_struct *work)
+{
+ drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
+ parity_error_work);
+ u32 error_status, row, bank, subbank;
+ char *parity_event[5];
+ uint32_t misccpctl;
+ unsigned long flags;
+
+ /* We must turn off DOP level clock gating to access the L3 registers.
+ * In order to prevent a get/put style interface, acquire struct mutex
+ * any time we access those registers.
+ */
+ mutex_lock(&dev_priv->dev->struct_mutex);
+
+ misccpctl = I915_READ(GEN7_MISCCPCTL);
+ I915_WRITE(GEN7_MISCCPCTL, misccpctl & ~GEN7_DOP_CLOCK_GATE_ENABLE);
+ POSTING_READ(GEN7_MISCCPCTL);
+
+ error_status = I915_READ(GEN7_L3CDERRST1);
+ row = GEN7_PARITY_ERROR_ROW(error_status);
+ bank = GEN7_PARITY_ERROR_BANK(error_status);
+ subbank = GEN7_PARITY_ERROR_SUBBANK(error_status);
+
+ I915_WRITE(GEN7_L3CDERRST1, GEN7_PARITY_ERROR_VALID |
+ GEN7_L3CDERRST1_ENABLE);
+ POSTING_READ(GEN7_L3CDERRST1);
+
+ I915_WRITE(GEN7_MISCCPCTL, misccpctl);
+
+ spin_lock_irqsave(&dev_priv->irq_lock, flags);
+ dev_priv->gt_irq_mask &= ~GT_GEN7_L3_PARITY_ERROR_INTERRUPT;
+ I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
+ spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
+
+ mutex_unlock(&dev_priv->dev->struct_mutex);
+
+ parity_event[0] = "L3_PARITY_ERROR=1";
+ parity_event[1] = kasprintf(GFP_KERNEL, "ROW=%d", row);
+ parity_event[2] = kasprintf(GFP_KERNEL, "BANK=%d", bank);
+ parity_event[3] = kasprintf(GFP_KERNEL, "SUBBANK=%d", subbank);
+ parity_event[4] = NULL;
+
+ kobject_uevent_env(&dev_priv->dev->primary->kdev.kobj,
+ KOBJ_CHANGE, parity_event);
+
+ DRM_DEBUG("Parity error: Row = %d, Bank = %d, Sub bank = %d.\n",
+ row, bank, subbank);
+
+ kfree(parity_event[3]);
+ kfree(parity_event[2]);
+ kfree(parity_event[1]);
+}
+
+static void ivybridge_handle_parity_error(struct drm_device *dev)
+{
+ drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ unsigned long flags;
+
+ if (!IS_IVYBRIDGE(dev))
+ return;
+
+ spin_lock_irqsave(&dev_priv->irq_lock, flags);
+ dev_priv->gt_irq_mask |= GT_GEN7_L3_PARITY_ERROR_INTERRUPT;
+ I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
+ spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
+
+ queue_work(dev_priv->wq, &dev_priv->parity_error_work);
+}
+
static void snb_gt_irq_handler(struct drm_device *dev,
struct drm_i915_private *dev_priv,
u32 gt_iir)
DRM_ERROR("GT error interrupt 0x%08x\n", gt_iir);
i915_handle_error(dev, false);
}
+
+ if (gt_iir & GT_GEN7_L3_PARITY_ERROR_INTERRUPT)
+ ivybridge_handle_parity_error(dev);
}
static void gen6_queue_rps_work(struct drm_i915_private *dev_priv,
atomic_set(&dev_priv->irq_received, 0);
-
I915_WRITE(HWSTAM, 0xeffe);
/* XXX hotplug from PCH */
DE_PIPEA_VBLANK_IVB);
POSTING_READ(DEIER);
- dev_priv->gt_irq_mask = ~0;
+ dev_priv->gt_irq_mask = ~GT_GEN7_L3_PARITY_ERROR_INTERRUPT;
I915_WRITE(GTIIR, I915_READ(GTIIR));
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
render_irqs = GT_USER_INTERRUPT | GEN6_BSD_USER_INTERRUPT |
- GEN6_BLITTER_USER_INTERRUPT;
+ GEN6_BLITTER_USER_INTERRUPT | GT_GEN7_L3_PARITY_ERROR_INTERRUPT;
I915_WRITE(GTIER, render_irqs);
POSTING_READ(GTIER);
hotplug_en |= HDMIC_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
hotplug_en |= HDMID_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS)
+ if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I915)
hotplug_en |= SDVOC_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS)
+ if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I915)
hotplug_en |= SDVOB_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
hotplug_en |= CRT_HOTPLUG_INT_EN;
atomic_set(&dev_priv->irq_received, 0);
- if (I915_HAS_HOTPLUG(dev)) {
- I915_WRITE(PORT_HOTPLUG_EN, 0);
- I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
- }
+ I915_WRITE(PORT_HOTPLUG_EN, 0);
+ I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
I915_WRITE(HWSTAM, 0xeffe);
for_each_pipe(pipe)
static int i965_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ u32 hotplug_en;
u32 enable_mask;
u32 error_mask;
/* Unmask the interrupts that we always want on. */
dev_priv->irq_mask = ~(I915_ASLE_INTERRUPT |
+ I915_DISPLAY_PORT_INTERRUPT |
I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
dev_priv->pipestat[0] = 0;
dev_priv->pipestat[1] = 0;
- if (I915_HAS_HOTPLUG(dev)) {
- /* Enable in IER... */
- enable_mask |= I915_DISPLAY_PORT_INTERRUPT;
- /* and unmask in IMR */
- dev_priv->irq_mask &= ~I915_DISPLAY_PORT_INTERRUPT;
- }
-
/*
* Enable some error detection, note the instruction error mask
* bit is reserved, so we leave it masked.
I915_WRITE(IER, enable_mask);
POSTING_READ(IER);
- if (I915_HAS_HOTPLUG(dev)) {
- u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
-
- /* Note HDMI and DP share bits */
- if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
- hotplug_en |= HDMIB_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
- hotplug_en |= HDMIC_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
- hotplug_en |= HDMID_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS)
+ /* Note HDMI and DP share hotplug bits */
+ hotplug_en = 0;
+ if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
+ hotplug_en |= HDMIB_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
+ hotplug_en |= HDMIC_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
+ hotplug_en |= HDMID_HOTPLUG_INT_EN;
+ if (IS_G4X(dev)) {
+ if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_G4X)
hotplug_en |= SDVOC_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS)
+ if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_G4X)
hotplug_en |= SDVOB_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
- hotplug_en |= CRT_HOTPLUG_INT_EN;
+ } else {
+ if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I965)
+ hotplug_en |= SDVOC_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I965)
+ hotplug_en |= SDVOB_HOTPLUG_INT_EN;
+ }
+ if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
+ hotplug_en |= CRT_HOTPLUG_INT_EN;
- /* Programming the CRT detection parameters tends
- to generate a spurious hotplug event about three
- seconds later. So just do it once.
- */
- if (IS_G4X(dev))
- hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
- hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
- }
+ /* Programming the CRT detection parameters tends
+ to generate a spurious hotplug event about three
+ seconds later. So just do it once.
+ */
+ if (IS_G4X(dev))
+ hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
+ hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
+ }
- /* Ignore TV since it's buggy */
+ /* Ignore TV since it's buggy */
- I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
- }
+ I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
intel_opregion_enable_asle(dev);
ret = IRQ_HANDLED;
/* Consume port. Then clear IIR or we'll miss events */
- if ((I915_HAS_HOTPLUG(dev)) &&
- (iir & I915_DISPLAY_PORT_INTERRUPT)) {
+ if (iir & I915_DISPLAY_PORT_INTERRUPT) {
u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
if (!dev_priv)
return;
- if (I915_HAS_HOTPLUG(dev)) {
- I915_WRITE(PORT_HOTPLUG_EN, 0);
- I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
- }
+ I915_WRITE(PORT_HOTPLUG_EN, 0);
+ I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
I915_WRITE(HWSTAM, 0xffffffff);
for_each_pipe(pipe)
INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func);
INIT_WORK(&dev_priv->error_work, i915_error_work_func);
INIT_WORK(&dev_priv->rps_work, gen6_pm_rps_work);
+ INIT_WORK(&dev_priv->parity_error_work, ivybridge_parity_work);
dev->driver->get_vblank_counter = i915_get_vblank_counter;
dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
projects / linux-drm-fsl-dcu.git / blobdiff