drivers/usb/phy/phy-mxs-usb.c

   1 /*
   2  * Copyright 2012-2014 Freescale Semiconductor, Inc.
   3  * Copyright (C) 2012 Marek Vasut <marex@denx.de>
   4  * on behalf of DENX Software Engineering GmbH
   5  *
   6  * The code contained herein is licensed under the GNU General Public
   7  * License. You may obtain a copy of the GNU General Public License
   8  * Version 2 or later at the following locations:
   9  *
  10  * http://www.opensource.org/licenses/gpl-license.html
  11  * http://www.gnu.org/copyleft/gpl.html
  12  */
  13
  14 #include <linux/module.h>
  15 #include <linux/kernel.h>
  16 #include <linux/platform_device.h>
  17 #include <linux/clk.h>
  18 #include <linux/usb/otg.h>
  19 #include <linux/stmp_device.h>
  20 #include <linux/delay.h>
  21 #include <linux/err.h>
  22 #include <linux/io.h>
  23 #include <linux/of_device.h>
  24 #include <linux/regmap.h>
  25 #include <linux/mfd/syscon.h>
  26
  27 #define DRIVER_NAME "mxs_phy"
  28
  29 #define HW_USBPHY_PWD                           0x00
  30 #define HW_USBPHY_CTRL                          0x30
  31 #define HW_USBPHY_CTRL_SET                      0x34
  32 #define HW_USBPHY_CTRL_CLR                      0x38
  33
  34 #define HW_USBPHY_DEBUG_SET                     0x54
  35 #define HW_USBPHY_DEBUG_CLR                     0x58
  36
  37 #define HW_USBPHY_IP                            0x90
  38 #define HW_USBPHY_IP_SET                        0x94
  39 #define HW_USBPHY_IP_CLR                        0x98
  40
  41 #define BM_USBPHY_CTRL_SFTRST                   BIT(31)
  42 #define BM_USBPHY_CTRL_CLKGATE                  BIT(30)
  43 #define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS        BIT(26)
  44 #define BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE     BIT(25)
  45 #define BM_USBPHY_CTRL_ENVBUSCHG_WKUP           BIT(23)
  46 #define BM_USBPHY_CTRL_ENIDCHG_WKUP             BIT(22)
  47 #define BM_USBPHY_CTRL_ENDPDMCHG_WKUP           BIT(21)
  48 #define BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD        BIT(20)
  49 #define BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE        BIT(19)
  50 #define BM_USBPHY_CTRL_ENAUTO_PWRON_PLL         BIT(18)
  51 #define BM_USBPHY_CTRL_ENUTMILEVEL3             BIT(15)
  52 #define BM_USBPHY_CTRL_ENUTMILEVEL2             BIT(14)
  53 #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT       BIT(1)
  54
  55 #define BM_USBPHY_IP_FIX                       (BIT(17) | BIT(18))
  56
  57 #define BM_USBPHY_DEBUG_CLKGATE                 BIT(30)
  58
  59 /* Anatop Registers */
  60 #define ANADIG_ANA_MISC0                        0x150
  61 #define ANADIG_ANA_MISC0_SET                    0x154
  62 #define ANADIG_ANA_MISC0_CLR                    0x158
  63
  64 #define ANADIG_USB1_VBUS_DET_STAT               0x1c0
  65 #define ANADIG_USB2_VBUS_DET_STAT               0x220
  66
  67 #define ANADIG_USB1_LOOPBACK_SET                0x1e4
  68 #define ANADIG_USB1_LOOPBACK_CLR                0x1e8
  69 #define ANADIG_USB2_LOOPBACK_SET                0x244
  70 #define ANADIG_USB2_LOOPBACK_CLR                0x248
  71
  72 #define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG    BIT(12)
  73 #define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL BIT(11)
  74
  75 #define BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID BIT(3)
  76 #define BM_ANADIG_USB2_VBUS_DET_STAT_VBUS_VALID BIT(3)
  77
  78 #define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1   BIT(2)
  79 #define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN      BIT(5)
  80 #define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1   BIT(2)
  81 #define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN      BIT(5)
  82
  83 #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
  84
  85 /* Do disconnection between PHY and controller without vbus */
  86 #define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS    BIT(0)
  87
  88 /*
  89  * The PHY will be in messy if there is a wakeup after putting
  90  * bus to suspend (set portsc.suspendM) but before setting PHY to low
  91  * power mode (set portsc.phcd).
  92  */
  93 #define MXS_PHY_ABNORMAL_IN_SUSPEND             BIT(1)
  94
  95 /*
  96  * The SOF sends too fast after resuming, it will cause disconnection
  97  * between host and high speed device.
  98  */
  99 #define MXS_PHY_SENDING_SOF_TOO_FAST            BIT(2)
 100
 101 /*
 102  * IC has bug fixes logic, they include
 103  * MXS_PHY_ABNORMAL_IN_SUSPEND and MXS_PHY_SENDING_SOF_TOO_FAST
 104  * which are described at above flags, the RTL will handle it
 105  * according to different versions.
 106  */
 107 #define MXS_PHY_NEED_IP_FIX                     BIT(3)
 108
 109 struct mxs_phy_data {
 110         unsigned int flags;
 111 };
 112
 113 static const struct mxs_phy_data imx23_phy_data = {
 114         .flags = MXS_PHY_ABNORMAL_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST,
 115 };
 116
 117 static const struct mxs_phy_data imx6q_phy_data = {
 118         .flags = MXS_PHY_SENDING_SOF_TOO_FAST |
 119                 MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
 120                 MXS_PHY_NEED_IP_FIX,
 121 };
 122
 123 static const struct mxs_phy_data imx6sl_phy_data = {
 124         .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
 125                 MXS_PHY_NEED_IP_FIX,
 126 };
 127
 128 static const struct mxs_phy_data vf610_phy_data = {
 129         .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
 130                 MXS_PHY_NEED_IP_FIX,
 131 };
 132
 133 static const struct mxs_phy_data imx6sx_phy_data = {
 134         .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
 135                 MXS_PHY_NEED_IP_FIX,
 136 };
 137
 138 static const struct of_device_id mxs_phy_dt_ids[] = {
 139         { .compatible = "fsl,imx6sx-usbphy", .data = &imx6sx_phy_data, },
 140         { .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
 141         { .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, },
 142         { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
 143         { .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, },
 144         { /* sentinel */ }
 145 };
 146 MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
 147
 148 struct mxs_phy {
 149         struct usb_phy phy;
 150         struct clk *clk;
 151         const struct mxs_phy_data *data;
 152         struct regmap *regmap_anatop;
 153         int port_id;
 154 };
 155
 156 static inline bool is_imx6q_phy(struct mxs_phy *mxs_phy)
 157 {
 158         return mxs_phy->data == &imx6q_phy_data;
 159 }
 160
 161 static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy)
 162 {
 163         return mxs_phy->data == &imx6sl_phy_data;
 164 }
 165
 166 /*
 167  * PHY needs some 32K cycles to switch from 32K clock to
 168  * bus (such as AHB/AXI, etc) clock.
 169  */
 170 static void mxs_phy_clock_switch_delay(void)
 171 {
 172         usleep_range(300, 400);
 173 }
 174
 175 static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 176 {
 177         int ret;
 178         void __iomem *base = mxs_phy->phy.io_priv;
 179
 180         ret = stmp_reset_block(base + HW_USBPHY_CTRL);
 181         if (ret)
 182                 return ret;
 183
 184         /* Power up the PHY */
 185         writel(0, base + HW_USBPHY_PWD);
 186
 187         /*
 188          * USB PHY Ctrl Setting
 189          * - Auto clock/power on
 190          * - Enable full/low speed support
 191          */
 192         writel(BM_USBPHY_CTRL_ENAUTOSET_USBCLKS |
 193                 BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE |
 194                 BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD |
 195                 BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE |
 196                 BM_USBPHY_CTRL_ENAUTO_PWRON_PLL |
 197                 BM_USBPHY_CTRL_ENUTMILEVEL2 |
 198                 BM_USBPHY_CTRL_ENUTMILEVEL3,
 199                base + HW_USBPHY_CTRL_SET);
 200
 201         if (mxs_phy->data->flags & MXS_PHY_NEED_IP_FIX)
 202                 writel(BM_USBPHY_IP_FIX, base + HW_USBPHY_IP_SET);
 203
 204         return 0;
 205 }
 206
 207 /* Return true if the vbus is there */
 208 static bool mxs_phy_get_vbus_status(struct mxs_phy *mxs_phy)
 209 {
 210         unsigned int vbus_value;
 211
 212         if (mxs_phy->port_id == 0)
 213                 regmap_read(mxs_phy->regmap_anatop,
 214                         ANADIG_USB1_VBUS_DET_STAT,
 215                         &vbus_value);
 216         else if (mxs_phy->port_id == 1)
 217                 regmap_read(mxs_phy->regmap_anatop,
 218                         ANADIG_USB2_VBUS_DET_STAT,
 219                         &vbus_value);
 220
 221         if (vbus_value & BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID)
 222                 return true;
 223         else
 224                 return false;
 225 }
 226
 227 static void __mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool disconnect)
 228 {
 229         void __iomem *base = mxs_phy->phy.io_priv;
 230         u32 reg;
 231
 232         if (disconnect)
 233                 writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
 234                         base + HW_USBPHY_DEBUG_CLR);
 235
 236         if (mxs_phy->port_id == 0) {
 237                 reg = disconnect ? ANADIG_USB1_LOOPBACK_SET
 238                         : ANADIG_USB1_LOOPBACK_CLR;
 239                 regmap_write(mxs_phy->regmap_anatop, reg,
 240                         BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 |
 241                         BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN);
 242         } else if (mxs_phy->port_id == 1) {
 243                 reg = disconnect ? ANADIG_USB2_LOOPBACK_SET
 244                         : ANADIG_USB2_LOOPBACK_CLR;
 245                 regmap_write(mxs_phy->regmap_anatop, reg,
 246                         BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 |
 247                         BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN);
 248         }
 249
 250         if (!disconnect)
 251                 writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
 252                         base + HW_USBPHY_DEBUG_SET);
 253
 254         /* Delay some time, and let Linestate be SE0 for controller */
 255         if (disconnect)
 256                 usleep_range(500, 1000);
 257 }
 258
 259 static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
 260 {
 261         bool vbus_is_on = false;
 262
 263         /* If the SoCs don't need to disconnect line without vbus, quit */
 264         if (!(mxs_phy->data->flags & MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS))
 265                 return;
 266
 267         /* If the SoCs don't have anatop, quit */
 268         if (!mxs_phy->regmap_anatop)
 269                 return;
 270
 271         vbus_is_on = mxs_phy_get_vbus_status(mxs_phy);
 272
 273         if (on && !vbus_is_on)
 274                 __mxs_phy_disconnect_line(mxs_phy, true);
 275         else
 276                 __mxs_phy_disconnect_line(mxs_phy, false);
 277
 278 }
 279
 280 static int mxs_phy_init(struct usb_phy *phy)
 281 {
 282         int ret;
 283         struct mxs_phy *mxs_phy = to_mxs_phy(phy);
 284
 285         mxs_phy_clock_switch_delay();
 286         ret = clk_prepare_enable(mxs_phy->clk);
 287         if (ret)
 288                 return ret;
 289
 290         return mxs_phy_hw_init(mxs_phy);
 291 }
 292
 293 static void mxs_phy_shutdown(struct usb_phy *phy)
 294 {
 295         struct mxs_phy *mxs_phy = to_mxs_phy(phy);
 296
 297         writel(BM_USBPHY_CTRL_CLKGATE,
 298                phy->io_priv + HW_USBPHY_CTRL_SET);
 299
 300         clk_disable_unprepare(mxs_phy->clk);
 301 }
 302
 303 static int mxs_phy_suspend(struct usb_phy *x, int suspend)
 304 {
 305         int ret;
 306         struct mxs_phy *mxs_phy = to_mxs_phy(x);
 307
 308         if (suspend) {
 309                 writel(0xffffffff, x->io_priv + HW_USBPHY_PWD);
 310                 writel(BM_USBPHY_CTRL_CLKGATE,
 311                        x->io_priv + HW_USBPHY_CTRL_SET);
 312                 clk_disable_unprepare(mxs_phy->clk);
 313         } else {
 314                 mxs_phy_clock_switch_delay();
 315                 ret = clk_prepare_enable(mxs_phy->clk);
 316                 if (ret)
 317                         return ret;
 318                 writel(BM_USBPHY_CTRL_CLKGATE,
 319                        x->io_priv + HW_USBPHY_CTRL_CLR);
 320                 writel(0, x->io_priv + HW_USBPHY_PWD);
 321         }
 322
 323         return 0;
 324 }
 325
 326 static int mxs_phy_set_wakeup(struct usb_phy *x, bool enabled)
 327 {
 328         struct mxs_phy *mxs_phy = to_mxs_phy(x);
 329         u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP |
 330                         BM_USBPHY_CTRL_ENDPDMCHG_WKUP |
 331                                 BM_USBPHY_CTRL_ENIDCHG_WKUP;
 332         if (enabled) {
 333                 mxs_phy_disconnect_line(mxs_phy, true);
 334                 writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_SET);
 335         } else {
 336                 writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_CLR);
 337                 mxs_phy_disconnect_line(mxs_phy, false);
 338         }
 339
 340         return 0;
 341 }
 342
 343 static int mxs_phy_on_connect(struct usb_phy *phy,
 344                 enum usb_device_speed speed)
 345 {
 346         dev_dbg(phy->dev, "%s device has connected\n",
 347                 (speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
 348
 349         if (speed == USB_SPEED_HIGH)
 350                 writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
 351                        phy->io_priv + HW_USBPHY_CTRL_SET);
 352
 353         return 0;
 354 }
 355
 356 static int mxs_phy_on_disconnect(struct usb_phy *phy,
 357                 enum usb_device_speed speed)
 358 {
 359         dev_dbg(phy->dev, "%s device has disconnected\n",
 360                 (speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
 361
 362         if (speed == USB_SPEED_HIGH)
 363                 writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
 364                        phy->io_priv + HW_USBPHY_CTRL_CLR);
 365
 366         return 0;
 367 }
 368
 369 static int mxs_phy_probe(struct platform_device *pdev)
 370 {
 371         struct resource *res;
 372         void __iomem *base;
 373         struct clk *clk;
 374         struct mxs_phy *mxs_phy;
 375         int ret;
 376         const struct of_device_id *of_id =
 377                         of_match_device(mxs_phy_dt_ids, &pdev->dev);
 378         struct device_node *np = pdev->dev.of_node;
 379
 380         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 381         base = devm_ioremap_resource(&pdev->dev, res);
 382         if (IS_ERR(base))
 383                 return PTR_ERR(base);
 384
 385         clk = devm_clk_get(&pdev->dev, NULL);
 386         if (IS_ERR(clk)) {
 387                 dev_err(&pdev->dev,
 388                         "can't get the clock, err=%ld", PTR_ERR(clk));
 389                 return PTR_ERR(clk);
 390         }
 391
 392         mxs_phy = devm_kzalloc(&pdev->dev, sizeof(*mxs_phy), GFP_KERNEL);
 393         if (!mxs_phy)
 394                 return -ENOMEM;
 395
 396         /* Some SoCs don't have anatop registers */
 397         if (of_get_property(np, "fsl,anatop", NULL)) {
 398                 mxs_phy->regmap_anatop = syscon_regmap_lookup_by_phandle
 399                         (np, "fsl,anatop");
 400                 if (IS_ERR(mxs_phy->regmap_anatop)) {
 401                         dev_dbg(&pdev->dev,
 402                                 "failed to find regmap for anatop\n");
 403                         return PTR_ERR(mxs_phy->regmap_anatop);
 404                 }
 405         }
 406
 407         ret = of_alias_get_id(np, "usbphy");
 408         if (ret < 0)
 409                 dev_dbg(&pdev->dev, "failed to get alias id, errno %d\n", ret);
 410         mxs_phy->port_id = ret;
 411
 412         mxs_phy->phy.io_priv            = base;
 413         mxs_phy->phy.dev                = &pdev->dev;
 414         mxs_phy->phy.label              = DRIVER_NAME;
 415         mxs_phy->phy.init               = mxs_phy_init;
 416         mxs_phy->phy.shutdown           = mxs_phy_shutdown;
 417         mxs_phy->phy.set_suspend        = mxs_phy_suspend;
 418         mxs_phy->phy.notify_connect     = mxs_phy_on_connect;
 419         mxs_phy->phy.notify_disconnect  = mxs_phy_on_disconnect;
 420         mxs_phy->phy.type               = USB_PHY_TYPE_USB2;
 421         mxs_phy->phy.set_wakeup         = mxs_phy_set_wakeup;
 422
 423         mxs_phy->clk = clk;
 424         mxs_phy->data = of_id->data;
 425
 426         platform_set_drvdata(pdev, mxs_phy);
 427
 428         device_set_wakeup_capable(&pdev->dev, true);
 429
 430         ret = usb_add_phy_dev(&mxs_phy->phy);
 431         if (ret)
 432                 return ret;
 433
 434         return 0;
 435 }
 436
 437 static int mxs_phy_remove(struct platform_device *pdev)
 438 {
 439         struct mxs_phy *mxs_phy = platform_get_drvdata(pdev);
 440
 441         usb_remove_phy(&mxs_phy->phy);
 442
 443         return 0;
 444 }
 445
 446 #ifdef CONFIG_PM_SLEEP
 447 static void mxs_phy_enable_ldo_in_suspend(struct mxs_phy *mxs_phy, bool on)
 448 {
 449         unsigned int reg = on ? ANADIG_ANA_MISC0_SET : ANADIG_ANA_MISC0_CLR;
 450
 451         /* If the SoCs don't have anatop, quit */
 452         if (!mxs_phy->regmap_anatop)
 453                 return;
 454
 455         if (is_imx6q_phy(mxs_phy))
 456                 regmap_write(mxs_phy->regmap_anatop, reg,
 457                         BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG);
 458         else if (is_imx6sl_phy(mxs_phy))
 459                 regmap_write(mxs_phy->regmap_anatop,
 460                         reg, BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL);
 461 }
 462
 463 static int mxs_phy_system_suspend(struct device *dev)
 464 {
 465         struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
 466
 467         if (device_may_wakeup(dev))
 468                 mxs_phy_enable_ldo_in_suspend(mxs_phy, true);
 469
 470         return 0;
 471 }
 472
 473 static int mxs_phy_system_resume(struct device *dev)
 474 {
 475         struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
 476
 477         if (device_may_wakeup(dev))
 478                 mxs_phy_enable_ldo_in_suspend(mxs_phy, false);
 479
 480         return 0;
 481 }
 482 #endif /* CONFIG_PM_SLEEP */
 483
 484 static SIMPLE_DEV_PM_OPS(mxs_phy_pm, mxs_phy_system_suspend,
 485                 mxs_phy_system_resume);
 486
 487 static struct platform_driver mxs_phy_driver = {
 488         .probe = mxs_phy_probe,
 489         .remove = mxs_phy_remove,
 490         .driver = {
 491                 .name = DRIVER_NAME,
 492                 .of_match_table = mxs_phy_dt_ids,
 493                 .pm = &mxs_phy_pm,
 494          },
 495 };
 496
 497 static int __init mxs_phy_module_init(void)
 498 {
 499         return platform_driver_register(&mxs_phy_driver);
 500 }
 501 postcore_initcall(mxs_phy_module_init);
 502
 503 static void __exit mxs_phy_module_exit(void)
 504 {
 505         platform_driver_unregister(&mxs_phy_driver);
 506 }
 507 module_exit(mxs_phy_module_exit);
 508
 509 MODULE_ALIAS("platform:mxs-usb-phy");
 510 MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
 511 MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>");
 512 MODULE_DESCRIPTION("Freescale MXS USB PHY driver");
 513 MODULE_LICENSE("GPL");