drivers/net/phy/phy.c

   1 /* Framework for configuring and reading PHY devices
   2  * Based on code in sungem_phy.c and gianfar_phy.c
   3  *
   4  * Author: Andy Fleming
   5  *
   6  * Copyright (c) 2004 Freescale Semiconductor, Inc.
   7  * Copyright (c) 2006, 2007  Maciej W. Rozycki
   8  *
   9  * This program is free software; you can redistribute  it and/or modify it
  10  * under  the terms of  the GNU General  Public License as published by the
  11  * Free Software Foundation;  either version 2 of the  License, or (at your
  12  * option) any later version.
  13  *
  14  */
  15
  16 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  17
  18 #include <linux/kernel.h>
  19 #include <linux/string.h>
  20 #include <linux/errno.h>
  21 #include <linux/unistd.h>
  22 #include <linux/interrupt.h>
  23 #include <linux/delay.h>
  24 #include <linux/netdevice.h>
  25 #include <linux/etherdevice.h>
  26 #include <linux/skbuff.h>
  27 #include <linux/mm.h>
  28 #include <linux/module.h>
  29 #include <linux/mii.h>
  30 #include <linux/ethtool.h>
  31 #include <linux/phy.h>
  32 #include <linux/timer.h>
  33 #include <linux/workqueue.h>
  34 #include <linux/mdio.h>
  35 #include <linux/io.h>
  36 #include <linux/uaccess.h>
  37 #include <linux/atomic.h>
  38
  39 #include <asm/irq.h>
  40
  41 static const char *phy_speed_to_str(int speed)
  42 {
  43         switch (speed) {
  44         case SPEED_10:
  45                 return "10Mbps";
  46         case SPEED_100:
  47                 return "100Mbps";
  48         case SPEED_1000:
  49                 return "1Gbps";
  50         case SPEED_2500:
  51                 return "2.5Gbps";
  52         case SPEED_10000:
  53                 return "10Gbps";
  54         case SPEED_UNKNOWN:
  55                 return "Unknown";
  56         default:
  57                 return "Unsupported (update phy.c)";
  58         }
  59 }
  60
  61 /**
  62  * phy_print_status - Convenience function to print out the current phy status
  63  * @phydev: the phy_device struct
  64  */
  65 void phy_print_status(struct phy_device *phydev)
  66 {
  67         if (phydev->link) {
  68                 netdev_info(phydev->attached_dev,
  69                         "Link is Up - %s/%s - flow control %s\n",
  70                         phy_speed_to_str(phydev->speed),
  71                         DUPLEX_FULL == phydev->duplex ? "Full" : "Half",
  72                         phydev->pause ? "rx/tx" : "off");
  73         } else  {
  74                 netdev_info(phydev->attached_dev, "Link is Down\n");
  75         }
  76 }
  77 EXPORT_SYMBOL(phy_print_status);
  78
  79 /**
  80  * phy_clear_interrupt - Ack the phy device's interrupt
  81  * @phydev: the phy_device struct
  82  *
  83  * If the @phydev driver has an ack_interrupt function, call it to
  84  * ack and clear the phy device's interrupt.
  85  *
  86  * Returns 0 on success or < 0 on error.
  87  */
  88 static int phy_clear_interrupt(struct phy_device *phydev)
  89 {
  90         if (phydev->drv->ack_interrupt)
  91                 return phydev->drv->ack_interrupt(phydev);
  92
  93         return 0;
  94 }
  95
  96 /**
  97  * phy_config_interrupt - configure the PHY device for the requested interrupts
  98  * @phydev: the phy_device struct
  99  * @interrupts: interrupt flags to configure for this @phydev
 100  *
 101  * Returns 0 on success or < 0 on error.
 102  */
 103 static int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)
 104 {
 105         phydev->interrupts = interrupts;
 106         if (phydev->drv->config_intr)
 107                 return phydev->drv->config_intr(phydev);
 108
 109         return 0;
 110 }
 111
 112
 113 /**
 114  * phy_aneg_done - return auto-negotiation status
 115  * @phydev: target phy_device struct
 116  *
 117  * Description: Return the auto-negotiation status from this @phydev
 118  * Returns > 0 on success or < 0 on error. 0 means that auto-negotiation
 119  * is still pending.
 120  */
 121 static inline int phy_aneg_done(struct phy_device *phydev)
 122 {
 123         if (phydev->drv->aneg_done)
 124                 return phydev->drv->aneg_done(phydev);
 125
 126         return genphy_aneg_done(phydev);
 127 }
 128
 129 /* A structure for mapping a particular speed and duplex
 130  * combination to a particular SUPPORTED and ADVERTISED value
 131  */
 132 struct phy_setting {
 133         int speed;
 134         int duplex;
 135         u32 setting;
 136 };
 137
 138 /* A mapping of all SUPPORTED settings to speed/duplex */
 139 static const struct phy_setting settings[] = {
 140         {
 141                 .speed = SPEED_10000,
 142                 .duplex = DUPLEX_FULL,
 143                 .setting = SUPPORTED_10000baseKR_Full,
 144         },
 145         {
 146                 .speed = SPEED_10000,
 147                 .duplex = DUPLEX_FULL,
 148                 .setting = SUPPORTED_10000baseKX4_Full,
 149         },
 150         {
 151                 .speed = SPEED_10000,
 152                 .duplex = DUPLEX_FULL,
 153                 .setting = SUPPORTED_10000baseT_Full,
 154         },
 155         {
 156                 .speed = SPEED_2500,
 157                 .duplex = DUPLEX_FULL,
 158                 .setting = SUPPORTED_2500baseX_Full,
 159         },
 160         {
 161                 .speed = SPEED_1000,
 162                 .duplex = DUPLEX_FULL,
 163                 .setting = SUPPORTED_1000baseKX_Full,
 164         },
 165         {
 166                 .speed = SPEED_1000,
 167                 .duplex = DUPLEX_FULL,
 168                 .setting = SUPPORTED_1000baseT_Full,
 169         },
 170         {
 171                 .speed = SPEED_1000,
 172                 .duplex = DUPLEX_HALF,
 173                 .setting = SUPPORTED_1000baseT_Half,
 174         },
 175         {
 176                 .speed = SPEED_100,
 177                 .duplex = DUPLEX_FULL,
 178                 .setting = SUPPORTED_100baseT_Full,
 179         },
 180         {
 181                 .speed = SPEED_100,
 182                 .duplex = DUPLEX_HALF,
 183                 .setting = SUPPORTED_100baseT_Half,
 184         },
 185         {
 186                 .speed = SPEED_10,
 187                 .duplex = DUPLEX_FULL,
 188                 .setting = SUPPORTED_10baseT_Full,
 189         },
 190         {
 191                 .speed = SPEED_10,
 192                 .duplex = DUPLEX_HALF,
 193                 .setting = SUPPORTED_10baseT_Half,
 194         },
 195 };
 196
 197 #define MAX_NUM_SETTINGS ARRAY_SIZE(settings)
 198
 199 /**
 200  * phy_find_setting - find a PHY settings array entry that matches speed & duplex
 201  * @speed: speed to match
 202  * @duplex: duplex to match
 203  *
 204  * Description: Searches the settings array for the setting which
 205  *   matches the desired speed and duplex, and returns the index
 206  *   of that setting.  Returns the index of the last setting if
 207  *   none of the others match.
 208  */
 209 static inline unsigned int phy_find_setting(int speed, int duplex)
 210 {
 211         unsigned int idx = 0;
 212
 213         while (idx < ARRAY_SIZE(settings) &&
 214                (settings[idx].speed != speed || settings[idx].duplex != duplex))
 215                 idx++;
 216
 217         return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1;
 218 }
 219
 220 /**
 221  * phy_find_valid - find a PHY setting that matches the requested features mask
 222  * @idx: The first index in settings[] to search
 223  * @features: A mask of the valid settings
 224  *
 225  * Description: Returns the index of the first valid setting less
 226  *   than or equal to the one pointed to by idx, as determined by
 227  *   the mask in features.  Returns the index of the last setting
 228  *   if nothing else matches.
 229  */
 230 static inline unsigned int phy_find_valid(unsigned int idx, u32 features)
 231 {
 232         while (idx < MAX_NUM_SETTINGS && !(settings[idx].setting & features))
 233                 idx++;
 234
 235         return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1;
 236 }
 237
 238 /**
 239  * phy_check_valid - check if there is a valid PHY setting which matches
 240  *                   speed, duplex, and feature mask
 241  * @speed: speed to match
 242  * @duplex: duplex to match
 243  * @features: A mask of the valid settings
 244  *
 245  * Description: Returns true if there is a valid setting, false otherwise.
 246  */
 247 static inline bool phy_check_valid(int speed, int duplex, u32 features)
 248 {
 249         unsigned int idx;
 250
 251         idx = phy_find_valid(phy_find_setting(speed, duplex), features);
 252
 253         return settings[idx].speed == speed && settings[idx].duplex == duplex &&
 254                 (settings[idx].setting & features);
 255 }
 256
 257 /**
 258  * phy_sanitize_settings - make sure the PHY is set to supported speed and duplex
 259  * @phydev: the target phy_device struct
 260  *
 261  * Description: Make sure the PHY is set to supported speeds and
 262  *   duplexes.  Drop down by one in this order:  1000/FULL,
 263  *   1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF.
 264  */
 265 static void phy_sanitize_settings(struct phy_device *phydev)
 266 {
 267         u32 features = phydev->supported;
 268         unsigned int idx;
 269
 270         /* Sanitize settings based on PHY capabilities */
 271         if ((features & SUPPORTED_Autoneg) == 0)
 272                 phydev->autoneg = AUTONEG_DISABLE;
 273
 274         idx = phy_find_valid(phy_find_setting(phydev->speed, phydev->duplex),
 275                         features);
 276
 277         phydev->speed = settings[idx].speed;
 278         phydev->duplex = settings[idx].duplex;
 279 }
 280
 281 /**
 282  * phy_ethtool_sset - generic ethtool sset function, handles all the details
 283  * @phydev: target phy_device struct
 284  * @cmd: ethtool_cmd
 285  *
 286  * A few notes about parameter checking:
 287  * - We don't set port or transceiver, so we don't care what they
 288  *   were set to.
 289  * - phy_start_aneg() will make sure forced settings are sane, and
 290  *   choose the next best ones from the ones selected, so we don't
 291  *   care if ethtool tries to give us bad values.
 292  */
 293 int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd)
 294 {
 295         u32 speed = ethtool_cmd_speed(cmd);
 296
 297         if (cmd->phy_address != phydev->addr)
 298                 return -EINVAL;
 299
 300         /* We make sure that we don't pass unsupported values in to the PHY */
 301         cmd->advertising &= phydev->supported;
 302
 303         /* Verify the settings we care about. */
 304         if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE)
 305                 return -EINVAL;
 306
 307         if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0)
 308                 return -EINVAL;
 309
 310         if (cmd->autoneg == AUTONEG_DISABLE &&
 311             ((speed != SPEED_1000 &&
 312               speed != SPEED_100 &&
 313               speed != SPEED_10) ||
 314              (cmd->duplex != DUPLEX_HALF &&
 315               cmd->duplex != DUPLEX_FULL)))
 316                 return -EINVAL;
 317
 318         phydev->autoneg = cmd->autoneg;
 319
 320         phydev->speed = speed;
 321
 322         phydev->advertising = cmd->advertising;
 323
 324         if (AUTONEG_ENABLE == cmd->autoneg)
 325                 phydev->advertising |= ADVERTISED_Autoneg;
 326         else
 327                 phydev->advertising &= ~ADVERTISED_Autoneg;
 328
 329         phydev->duplex = cmd->duplex;
 330
 331         /* Restart the PHY */
 332         phy_start_aneg(phydev);
 333
 334         return 0;
 335 }
 336 EXPORT_SYMBOL(phy_ethtool_sset);
 337
 338 int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd)
 339 {
 340         cmd->supported = phydev->supported;
 341
 342         cmd->advertising = phydev->advertising;
 343         cmd->lp_advertising = phydev->lp_advertising;
 344
 345         ethtool_cmd_speed_set(cmd, phydev->speed);
 346         cmd->duplex = phydev->duplex;
 347         if (phydev->interface == PHY_INTERFACE_MODE_MOCA)
 348                 cmd->port = PORT_BNC;
 349         else
 350                 cmd->port = PORT_MII;
 351         cmd->phy_address = phydev->addr;
 352         cmd->transceiver = phy_is_internal(phydev) ?
 353                 XCVR_INTERNAL : XCVR_EXTERNAL;
 354         cmd->autoneg = phydev->autoneg;
 355
 356         return 0;
 357 }
 358 EXPORT_SYMBOL(phy_ethtool_gset);
 359
 360 /**
 361  * phy_mii_ioctl - generic PHY MII ioctl interface
 362  * @phydev: the phy_device struct
 363  * @ifr: &struct ifreq for socket ioctl's
 364  * @cmd: ioctl cmd to execute
 365  *
 366  * Note that this function is currently incompatible with the
 367  * PHYCONTROL layer.  It changes registers without regard to
 368  * current state.  Use at own risk.
 369  */
 370 int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd)
 371 {
 372         struct mii_ioctl_data *mii_data = if_mii(ifr);
 373         u16 val = mii_data->val_in;
 374         bool change_autoneg = false;
 375
 376         switch (cmd) {
 377         case SIOCGMIIPHY:
 378                 mii_data->phy_id = phydev->addr;
 379                 /* fall through */
 380
 381         case SIOCGMIIREG:
 382                 mii_data->val_out = mdiobus_read(phydev->bus, mii_data->phy_id,
 383                                                  mii_data->reg_num);
 384                 return 0;
 385
 386         case SIOCSMIIREG:
 387                 if (mii_data->phy_id == phydev->addr) {
 388                         switch (mii_data->reg_num) {
 389                         case MII_BMCR:
 390                                 if ((val & (BMCR_RESET | BMCR_ANENABLE)) == 0) {
 391                                         if (phydev->autoneg == AUTONEG_ENABLE)
 392                                                 change_autoneg = true;
 393                                         phydev->autoneg = AUTONEG_DISABLE;
 394                                         if (val & BMCR_FULLDPLX)
 395                                                 phydev->duplex = DUPLEX_FULL;
 396                                         else
 397                                                 phydev->duplex = DUPLEX_HALF;
 398                                         if (val & BMCR_SPEED1000)
 399                                                 phydev->speed = SPEED_1000;
 400                                         else if (val & BMCR_SPEED100)
 401                                                 phydev->speed = SPEED_100;
 402                                         else phydev->speed = SPEED_10;
 403                                 }
 404                                 else {
 405                                         if (phydev->autoneg == AUTONEG_DISABLE)
 406                                                 change_autoneg = true;
 407                                         phydev->autoneg = AUTONEG_ENABLE;
 408                                 }
 409                                 break;
 410                         case MII_ADVERTISE:
 411                                 phydev->advertising = mii_adv_to_ethtool_adv_t(val);
 412                                 change_autoneg = true;
 413                                 break;
 414                         default:
 415                                 /* do nothing */
 416                                 break;
 417                         }
 418                 }
 419
 420                 mdiobus_write(phydev->bus, mii_data->phy_id,
 421                               mii_data->reg_num, val);
 422
 423                 if (mii_data->reg_num == MII_BMCR &&
 424                     val & BMCR_RESET)
 425                         return phy_init_hw(phydev);
 426
 427                 if (change_autoneg)
 428                         return phy_start_aneg(phydev);
 429
 430                 return 0;
 431
 432         case SIOCSHWTSTAMP:
 433                 if (phydev->drv->hwtstamp)
 434                         return phydev->drv->hwtstamp(phydev, ifr);
 435                 /* fall through */
 436
 437         default:
 438                 return -EOPNOTSUPP;
 439         }
 440 }
 441 EXPORT_SYMBOL(phy_mii_ioctl);
 442
 443 /**
 444  * phy_start_aneg - start auto-negotiation for this PHY device
 445  * @phydev: the phy_device struct
 446  *
 447  * Description: Sanitizes the settings (if we're not autonegotiating
 448  *   them), and then calls the driver's config_aneg function.
 449  *   If the PHYCONTROL Layer is operating, we change the state to
 450  *   reflect the beginning of Auto-negotiation or forcing.
 451  */
 452 int phy_start_aneg(struct phy_device *phydev)
 453 {
 454         int err;
 455
 456         mutex_lock(&phydev->lock);
 457
 458         if (AUTONEG_DISABLE == phydev->autoneg)
 459                 phy_sanitize_settings(phydev);
 460
 461         /* Invalidate LP advertising flags */
 462         phydev->lp_advertising = 0;
 463
 464         err = phydev->drv->config_aneg(phydev);
 465         if (err < 0)
 466                 goto out_unlock;
 467
 468         if (phydev->state != PHY_HALTED) {
 469                 if (AUTONEG_ENABLE == phydev->autoneg) {
 470                         phydev->state = PHY_AN;
 471                         phydev->link_timeout = PHY_AN_TIMEOUT;
 472                 } else {
 473                         phydev->state = PHY_FORCING;
 474                         phydev->link_timeout = PHY_FORCE_TIMEOUT;
 475                 }
 476         }
 477
 478 out_unlock:
 479         mutex_unlock(&phydev->lock);
 480         return err;
 481 }
 482 EXPORT_SYMBOL(phy_start_aneg);
 483
 484 /**
 485  * phy_start_machine - start PHY state machine tracking
 486  * @phydev: the phy_device struct
 487  *
 488  * Description: The PHY infrastructure can run a state machine
 489  *   which tracks whether the PHY is starting up, negotiating,
 490  *   etc.  This function starts the timer which tracks the state
 491  *   of the PHY.  If you want to maintain your own state machine,
 492  *   do not call this function.
 493  */
 494 void phy_start_machine(struct phy_device *phydev)
 495 {
 496         queue_delayed_work(system_power_efficient_wq, &phydev->state_queue, HZ);
 497 }
 498
 499 /**
 500  * phy_stop_machine - stop the PHY state machine tracking
 501  * @phydev: target phy_device struct
 502  *
 503  * Description: Stops the state machine timer, sets the state to UP
 504  *   (unless it wasn't up yet). This function must be called BEFORE
 505  *   phy_detach.
 506  */
 507 void phy_stop_machine(struct phy_device *phydev)
 508 {
 509         cancel_delayed_work_sync(&phydev->state_queue);
 510
 511         mutex_lock(&phydev->lock);
 512         if (phydev->state > PHY_UP)
 513                 phydev->state = PHY_UP;
 514         mutex_unlock(&phydev->lock);
 515 }
 516
 517 /**
 518  * phy_error - enter HALTED state for this PHY device
 519  * @phydev: target phy_device struct
 520  *
 521  * Moves the PHY to the HALTED state in response to a read
 522  * or write error, and tells the controller the link is down.
 523  * Must not be called from interrupt context, or while the
 524  * phydev->lock is held.
 525  */
 526 static void phy_error(struct phy_device *phydev)
 527 {
 528         mutex_lock(&phydev->lock);
 529         phydev->state = PHY_HALTED;
 530         mutex_unlock(&phydev->lock);
 531 }
 532
 533 /**
 534  * phy_interrupt - PHY interrupt handler
 535  * @irq: interrupt line
 536  * @phy_dat: phy_device pointer
 537  *
 538  * Description: When a PHY interrupt occurs, the handler disables
 539  * interrupts, and schedules a work task to clear the interrupt.
 540  */
 541 static irqreturn_t phy_interrupt(int irq, void *phy_dat)
 542 {
 543         struct phy_device *phydev = phy_dat;
 544
 545         if (PHY_HALTED == phydev->state)
 546                 return IRQ_NONE;                /* It can't be ours.  */
 547
 548         /* The MDIO bus is not allowed to be written in interrupt
 549          * context, so we need to disable the irq here.  A work
 550          * queue will write the PHY to disable and clear the
 551          * interrupt, and then reenable the irq line.
 552          */
 553         disable_irq_nosync(irq);
 554         atomic_inc(&phydev->irq_disable);
 555
 556         queue_work(system_power_efficient_wq, &phydev->phy_queue);
 557
 558         return IRQ_HANDLED;
 559 }
 560
 561 /**
 562  * phy_enable_interrupts - Enable the interrupts from the PHY side
 563  * @phydev: target phy_device struct
 564  */
 565 static int phy_enable_interrupts(struct phy_device *phydev)
 566 {
 567         int err = phy_clear_interrupt(phydev);
 568
 569         if (err < 0)
 570                 return err;
 571
 572         return phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
 573 }
 574
 575 /**
 576  * phy_disable_interrupts - Disable the PHY interrupts from the PHY side
 577  * @phydev: target phy_device struct
 578  */
 579 static int phy_disable_interrupts(struct phy_device *phydev)
 580 {
 581         int err;
 582
 583         /* Disable PHY interrupts */
 584         err = phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
 585         if (err)
 586                 goto phy_err;
 587
 588         /* Clear the interrupt */
 589         err = phy_clear_interrupt(phydev);
 590         if (err)
 591                 goto phy_err;
 592
 593         return 0;
 594
 595 phy_err:
 596         phy_error(phydev);
 597
 598         return err;
 599 }
 600
 601 /**
 602  * phy_start_interrupts - request and enable interrupts for a PHY device
 603  * @phydev: target phy_device struct
 604  *
 605  * Description: Request the interrupt for the given PHY.
 606  *   If this fails, then we set irq to PHY_POLL.
 607  *   Otherwise, we enable the interrupts in the PHY.
 608  *   This should only be called with a valid IRQ number.
 609  *   Returns 0 on success or < 0 on error.
 610  */
 611 int phy_start_interrupts(struct phy_device *phydev)
 612 {
 613         atomic_set(&phydev->irq_disable, 0);
 614         if (request_irq(phydev->irq, phy_interrupt, 0, "phy_interrupt",
 615                         phydev) < 0) {
 616                 pr_warn("%s: Can't get IRQ %d (PHY)\n",
 617                         phydev->bus->name, phydev->irq);
 618                 phydev->irq = PHY_POLL;
 619                 return 0;
 620         }
 621
 622         return phy_enable_interrupts(phydev);
 623 }
 624 EXPORT_SYMBOL(phy_start_interrupts);
 625
 626 /**
 627  * phy_stop_interrupts - disable interrupts from a PHY device
 628  * @phydev: target phy_device struct
 629  */
 630 int phy_stop_interrupts(struct phy_device *phydev)
 631 {
 632         int err = phy_disable_interrupts(phydev);
 633
 634         if (err)
 635                 phy_error(phydev);
 636
 637         free_irq(phydev->irq, phydev);
 638
 639         /* Cannot call flush_scheduled_work() here as desired because
 640          * of rtnl_lock(), but we do not really care about what would
 641          * be done, except from enable_irq(), so cancel any work
 642          * possibly pending and take care of the matter below.
 643          */
 644         cancel_work_sync(&phydev->phy_queue);
 645         /* If work indeed has been cancelled, disable_irq() will have
 646          * been left unbalanced from phy_interrupt() and enable_irq()
 647          * has to be called so that other devices on the line work.
 648          */
 649         while (atomic_dec_return(&phydev->irq_disable) >= 0)
 650                 enable_irq(phydev->irq);
 651
 652         return err;
 653 }
 654 EXPORT_SYMBOL(phy_stop_interrupts);
 655
 656 /**
 657  * phy_change - Scheduled by the phy_interrupt/timer to handle PHY changes
 658  * @work: work_struct that describes the work to be done
 659  */
 660 void phy_change(struct work_struct *work)
 661 {
 662         struct phy_device *phydev =
 663                 container_of(work, struct phy_device, phy_queue);
 664
 665         if (phydev->drv->did_interrupt &&
 666             !phydev->drv->did_interrupt(phydev))
 667                 goto ignore;
 668
 669         if (phy_disable_interrupts(phydev))
 670                 goto phy_err;
 671
 672         mutex_lock(&phydev->lock);
 673         if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state))
 674                 phydev->state = PHY_CHANGELINK;
 675         mutex_unlock(&phydev->lock);
 676
 677         atomic_dec(&phydev->irq_disable);
 678         enable_irq(phydev->irq);
 679
 680         /* Reenable interrupts */
 681         if (PHY_HALTED != phydev->state &&
 682             phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED))
 683                 goto irq_enable_err;
 684
 685         /* reschedule state queue work to run as soon as possible */
 686         cancel_delayed_work_sync(&phydev->state_queue);
 687         queue_delayed_work(system_power_efficient_wq, &phydev->state_queue, 0);
 688         return;
 689
 690 ignore:
 691         atomic_dec(&phydev->irq_disable);
 692         enable_irq(phydev->irq);
 693         return;
 694
 695 irq_enable_err:
 696         disable_irq(phydev->irq);
 697         atomic_inc(&phydev->irq_disable);
 698 phy_err:
 699         phy_error(phydev);
 700 }
 701
 702 /**
 703  * phy_stop - Bring down the PHY link, and stop checking the status
 704  * @phydev: target phy_device struct
 705  */
 706 void phy_stop(struct phy_device *phydev)
 707 {
 708         mutex_lock(&phydev->lock);
 709
 710         if (PHY_HALTED == phydev->state)
 711                 goto out_unlock;
 712
 713         if (phy_interrupt_is_valid(phydev)) {
 714                 /* Disable PHY Interrupts */
 715                 phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
 716
 717                 /* Clear any pending interrupts */
 718                 phy_clear_interrupt(phydev);
 719         }
 720
 721         phydev->state = PHY_HALTED;
 722
 723 out_unlock:
 724         mutex_unlock(&phydev->lock);
 725
 726         /* Cannot call flush_scheduled_work() here as desired because
 727          * of rtnl_lock(), but PHY_HALTED shall guarantee phy_change()
 728          * will not reenable interrupts.
 729          */
 730 }
 731 EXPORT_SYMBOL(phy_stop);
 732
 733 /**
 734  * phy_start - start or restart a PHY device
 735  * @phydev: target phy_device struct
 736  *
 737  * Description: Indicates the attached device's readiness to
 738  *   handle PHY-related work.  Used during startup to start the
 739  *   PHY, and after a call to phy_stop() to resume operation.
 740  *   Also used to indicate the MDIO bus has cleared an error
 741  *   condition.
 742  */
 743 void phy_start(struct phy_device *phydev)
 744 {
 745         mutex_lock(&phydev->lock);
 746
 747         switch (phydev->state) {
 748         case PHY_STARTING:
 749                 phydev->state = PHY_PENDING;
 750                 break;
 751         case PHY_READY:
 752                 phydev->state = PHY_UP;
 753                 break;
 754         case PHY_HALTED:
 755                 phydev->state = PHY_RESUMING;
 756         default:
 757                 break;
 758         }
 759         mutex_unlock(&phydev->lock);
 760 }
 761 EXPORT_SYMBOL(phy_start);
 762
 763 /**
 764  * phy_state_machine - Handle the state machine
 765  * @work: work_struct that describes the work to be done
 766  */
 767 void phy_state_machine(struct work_struct *work)
 768 {
 769         struct delayed_work *dwork = to_delayed_work(work);
 770         struct phy_device *phydev =
 771                         container_of(dwork, struct phy_device, state_queue);
 772         bool needs_aneg = false, do_suspend = false, do_resume = false;
 773         int err = 0;
 774
 775         mutex_lock(&phydev->lock);
 776
 777         if (phydev->drv->link_change_notify)
 778                 phydev->drv->link_change_notify(phydev);
 779
 780         switch (phydev->state) {
 781         case PHY_DOWN:
 782         case PHY_STARTING:
 783         case PHY_READY:
 784         case PHY_PENDING:
 785                 break;
 786         case PHY_UP:
 787                 needs_aneg = true;
 788
 789                 phydev->link_timeout = PHY_AN_TIMEOUT;
 790
 791                 break;
 792         case PHY_AN:
 793                 err = phy_read_status(phydev);
 794                 if (err < 0)
 795                         break;
 796
 797                 /* If the link is down, give up on negotiation for now */
 798                 if (!phydev->link) {
 799                         phydev->state = PHY_NOLINK;
 800                         netif_carrier_off(phydev->attached_dev);
 801                         phydev->adjust_link(phydev->attached_dev);
 802                         break;
 803                 }
 804
 805                 /* Check if negotiation is done.  Break if there's an error */
 806                 err = phy_aneg_done(phydev);
 807                 if (err < 0)
 808                         break;
 809
 810                 /* If AN is done, we're running */
 811                 if (err > 0) {
 812                         phydev->state = PHY_RUNNING;
 813                         netif_carrier_on(phydev->attached_dev);
 814                         phydev->adjust_link(phydev->attached_dev);
 815
 816                 } else if (0 == phydev->link_timeout--)
 817                         needs_aneg = true;
 818                 break;
 819         case PHY_NOLINK:
 820                 err = phy_read_status(phydev);
 821                 if (err)
 822                         break;
 823
 824                 if (phydev->link) {
 825                         if (AUTONEG_ENABLE == phydev->autoneg) {
 826                                 err = phy_aneg_done(phydev);
 827                                 if (err < 0)
 828                                         break;
 829
 830                                 if (!err) {
 831                                         phydev->state = PHY_AN;
 832                                         phydev->link_timeout = PHY_AN_TIMEOUT;
 833                                         break;
 834                                 }
 835                         }
 836                         phydev->state = PHY_RUNNING;
 837                         netif_carrier_on(phydev->attached_dev);
 838                         phydev->adjust_link(phydev->attached_dev);
 839                 }
 840                 break;
 841         case PHY_FORCING:
 842                 err = genphy_update_link(phydev);
 843                 if (err)
 844                         break;
 845
 846                 if (phydev->link) {
 847                         phydev->state = PHY_RUNNING;
 848                         netif_carrier_on(phydev->attached_dev);
 849                 } else {
 850                         if (0 == phydev->link_timeout--)
 851                                 needs_aneg = true;
 852                 }
 853
 854                 phydev->adjust_link(phydev->attached_dev);
 855                 break;
 856         case PHY_RUNNING:
 857                 /* Only register a CHANGE if we are
 858                  * polling or ignoring interrupts
 859                  */
 860                 if (!phy_interrupt_is_valid(phydev))
 861                         phydev->state = PHY_CHANGELINK;
 862                 break;
 863         case PHY_CHANGELINK:
 864                 err = phy_read_status(phydev);
 865                 if (err)
 866                         break;
 867
 868                 if (phydev->link) {
 869                         phydev->state = PHY_RUNNING;
 870                         netif_carrier_on(phydev->attached_dev);
 871                 } else {
 872                         phydev->state = PHY_NOLINK;
 873                         netif_carrier_off(phydev->attached_dev);
 874                 }
 875
 876                 phydev->adjust_link(phydev->attached_dev);
 877
 878                 if (phy_interrupt_is_valid(phydev))
 879                         err = phy_config_interrupt(phydev,
 880                                                    PHY_INTERRUPT_ENABLED);
 881                 break;
 882         case PHY_HALTED:
 883                 if (phydev->link) {
 884                         phydev->link = 0;
 885                         netif_carrier_off(phydev->attached_dev);
 886                         phydev->adjust_link(phydev->attached_dev);
 887                         do_suspend = true;
 888                 }
 889                 break;
 890         case PHY_RESUMING:
 891                 err = phy_clear_interrupt(phydev);
 892                 if (err)
 893                         break;
 894
 895                 err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
 896                 if (err)
 897                         break;
 898
 899                 if (AUTONEG_ENABLE == phydev->autoneg) {
 900                         err = phy_aneg_done(phydev);
 901                         if (err < 0)
 902                                 break;
 903
 904                         /* err > 0 if AN is done.
 905                          * Otherwise, it's 0, and we're  still waiting for AN
 906                          */
 907                         if (err > 0) {
 908                                 err = phy_read_status(phydev);
 909                                 if (err)
 910                                         break;
 911
 912                                 if (phydev->link) {
 913                                         phydev->state = PHY_RUNNING;
 914                                         netif_carrier_on(phydev->attached_dev);
 915                                 } else  {
 916                                         phydev->state = PHY_NOLINK;
 917                                 }
 918                                 phydev->adjust_link(phydev->attached_dev);
 919                         } else {
 920                                 phydev->state = PHY_AN;
 921                                 phydev->link_timeout = PHY_AN_TIMEOUT;
 922                         }
 923                 } else {
 924                         err = phy_read_status(phydev);
 925                         if (err)
 926                                 break;
 927
 928                         if (phydev->link) {
 929                                 phydev->state = PHY_RUNNING;
 930                                 netif_carrier_on(phydev->attached_dev);
 931                         } else  {
 932                                 phydev->state = PHY_NOLINK;
 933                         }
 934                         phydev->adjust_link(phydev->attached_dev);
 935                 }
 936                 do_resume = true;
 937                 break;
 938         }
 939
 940         mutex_unlock(&phydev->lock);
 941
 942         if (needs_aneg)
 943                 err = phy_start_aneg(phydev);
 944         else if (do_suspend)
 945                 phy_suspend(phydev);
 946         else if (do_resume)
 947                 phy_resume(phydev);
 948
 949         if (err < 0)
 950                 phy_error(phydev);
 951
 952         queue_delayed_work(system_power_efficient_wq, &phydev->state_queue,
 953                            PHY_STATE_TIME * HZ);
 954 }
 955
 956 void phy_mac_interrupt(struct phy_device *phydev, int new_link)
 957 {
 958         cancel_work_sync(&phydev->phy_queue);
 959         phydev->link = new_link;
 960         schedule_work(&phydev->phy_queue);
 961 }
 962 EXPORT_SYMBOL(phy_mac_interrupt);
 963
 964 static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad,
 965                                     int addr)
 966 {
 967         /* Write the desired MMD Devad */
 968         bus->write(bus, addr, MII_MMD_CTRL, devad);
 969
 970         /* Write the desired MMD register address */
 971         bus->write(bus, addr, MII_MMD_DATA, prtad);
 972
 973         /* Select the Function : DATA with no post increment */
 974         bus->write(bus, addr, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
 975 }
 976
 977 /**
 978  * phy_read_mmd_indirect - reads data from the MMD registers
 979  * @phydev: The PHY device bus
 980  * @prtad: MMD Address
 981  * @devad: MMD DEVAD
 982  * @addr: PHY address on the MII bus
 983  *
 984  * Description: it reads data from the MMD registers (clause 22 to access to
 985  * clause 45) of the specified phy address.
 986  * To read these register we have:
 987  * 1) Write reg 13 // DEVAD
 988  * 2) Write reg 14 // MMD Address
 989  * 3) Write reg 13 // MMD Data Command for MMD DEVAD
 990  * 3) Read  reg 14 // Read MMD data
 991  */
 992 int phy_read_mmd_indirect(struct phy_device *phydev, int prtad,
 993                                  int devad, int addr)
 994 {
 995         struct phy_driver *phydrv = phydev->drv;
 996         int value = -1;
 997
 998         if (phydrv->read_mmd_indirect == NULL) {
 999                 mmd_phy_indirect(phydev->bus, prtad, devad, addr);
1000
1001                 /* Read the content of the MMD's selected register */
1002                 value = phydev->bus->read(phydev->bus, addr, MII_MMD_DATA);
1003         } else {
1004                 value = phydrv->read_mmd_indirect(phydev, prtad, devad, addr);
1005         }
1006         return value;
1007 }
1008 EXPORT_SYMBOL(phy_read_mmd_indirect);
1009
1010 /**
1011  * phy_write_mmd_indirect - writes data to the MMD registers
1012  * @phydev: The PHY device
1013  * @prtad: MMD Address
1014  * @devad: MMD DEVAD
1015  * @addr: PHY address on the MII bus
1016  * @data: data to write in the MMD register
1017  *
1018  * Description: Write data from the MMD registers of the specified
1019  * phy address.
1020  * To write these register we have:
1021  * 1) Write reg 13 // DEVAD
1022  * 2) Write reg 14 // MMD Address
1023  * 3) Write reg 13 // MMD Data Command for MMD DEVAD
1024  * 3) Write reg 14 // Write MMD data
1025  */
1026 void phy_write_mmd_indirect(struct phy_device *phydev, int prtad,
1027                                    int devad, int addr, u32 data)
1028 {
1029         struct phy_driver *phydrv = phydev->drv;
1030
1031         if (phydrv->write_mmd_indirect == NULL) {
1032                 mmd_phy_indirect(phydev->bus, prtad, devad, addr);
1033
1034                 /* Write the data into MMD's selected register */
1035                 phydev->bus->write(phydev->bus, addr, MII_MMD_DATA, data);
1036         } else {
1037                 phydrv->write_mmd_indirect(phydev, prtad, devad, addr, data);
1038         }
1039 }
1040 EXPORT_SYMBOL(phy_write_mmd_indirect);
1041
1042 /**
1043  * phy_init_eee - init and check the EEE feature
1044  * @phydev: target phy_device struct
1045  * @clk_stop_enable: PHY may stop the clock during LPI
1046  *
1047  * Description: it checks if the Energy-Efficient Ethernet (EEE)
1048  * is supported by looking at the MMD registers 3.20 and 7.60/61
1049  * and it programs the MMD register 3.0 setting the "Clock stop enable"
1050  * bit if required.
1051  */
1052 int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
1053 {
1054         /* According to 802.3az,the EEE is supported only in full duplex-mode.
1055          * Also EEE feature is active when core is operating with MII, GMII
1056          * or RGMII. Internal PHYs are also allowed to proceed and should
1057          * return an error if they do not support EEE.
1058          */
1059         if ((phydev->duplex == DUPLEX_FULL) &&
1060             ((phydev->interface == PHY_INTERFACE_MODE_MII) ||
1061             (phydev->interface == PHY_INTERFACE_MODE_GMII) ||
1062             (phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
1063              phy_is_internal(phydev))) {
1064                 int eee_lp, eee_cap, eee_adv;
1065                 u32 lp, cap, adv;
1066                 int status;
1067
1068                 /* Read phy status to properly get the right settings */
1069                 status = phy_read_status(phydev);
1070                 if (status)
1071                         return status;
1072
1073                 /* First check if the EEE ability is supported */
1074                 eee_cap = phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_ABLE,
1075                                                 MDIO_MMD_PCS, phydev->addr);
1076                 if (eee_cap <= 0)
1077                         goto eee_exit_err;
1078
1079                 cap = mmd_eee_cap_to_ethtool_sup_t(eee_cap);
1080                 if (!cap)
1081                         goto eee_exit_err;
1082
1083                 /* Check which link settings negotiated and verify it in
1084                  * the EEE advertising registers.
1085                  */
1086                 eee_lp = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_LPABLE,
1087                                                MDIO_MMD_AN, phydev->addr);
1088                 if (eee_lp <= 0)
1089                         goto eee_exit_err;
1090
1091                 eee_adv = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
1092                                                 MDIO_MMD_AN, phydev->addr);
1093                 if (eee_adv <= 0)
1094                         goto eee_exit_err;
1095
1096                 adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv);
1097                 lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp);
1098                 if (!phy_check_valid(phydev->speed, phydev->duplex, lp & adv))
1099                         goto eee_exit_err;
1100
1101                 if (clk_stop_enable) {
1102                         /* Configure the PHY to stop receiving xMII
1103                          * clock while it is signaling LPI.
1104                          */
1105                         int val = phy_read_mmd_indirect(phydev, MDIO_CTRL1,
1106                                                         MDIO_MMD_PCS,
1107                                                         phydev->addr);
1108                         if (val < 0)
1109                                 return val;
1110
1111                         val |= MDIO_PCS_CTRL1_CLKSTOP_EN;
1112                         phy_write_mmd_indirect(phydev, MDIO_CTRL1,
1113                                                MDIO_MMD_PCS, phydev->addr,
1114                                                val);
1115                 }
1116
1117                 return 0; /* EEE supported */
1118         }
1119 eee_exit_err:
1120         return -EPROTONOSUPPORT;
1121 }
1122 EXPORT_SYMBOL(phy_init_eee);
1123
1124 /**
1125  * phy_get_eee_err - report the EEE wake error count
1126  * @phydev: target phy_device struct
1127  *
1128  * Description: it is to report the number of time where the PHY
1129  * failed to complete its normal wake sequence.
1130  */
1131 int phy_get_eee_err(struct phy_device *phydev)
1132 {
1133         return phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_WK_ERR,
1134                                      MDIO_MMD_PCS, phydev->addr);
1135 }
1136 EXPORT_SYMBOL(phy_get_eee_err);
1137
1138 /**
1139  * phy_ethtool_get_eee - get EEE supported and status
1140  * @phydev: target phy_device struct
1141  * @data: ethtool_eee data
1142  *
1143  * Description: it reportes the Supported/Advertisement/LP Advertisement
1144  * capabilities.
1145  */
1146 int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data)
1147 {
1148         int val;
1149
1150         /* Get Supported EEE */
1151         val = phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_ABLE,
1152                                     MDIO_MMD_PCS, phydev->addr);
1153         if (val < 0)
1154                 return val;
1155         data->supported = mmd_eee_cap_to_ethtool_sup_t(val);
1156
1157         /* Get advertisement EEE */
1158         val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
1159                                     MDIO_MMD_AN, phydev->addr);
1160         if (val < 0)
1161                 return val;
1162         data->advertised = mmd_eee_adv_to_ethtool_adv_t(val);
1163
1164         /* Get LP advertisement EEE */
1165         val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_LPABLE,
1166                                     MDIO_MMD_AN, phydev->addr);
1167         if (val < 0)
1168                 return val;
1169         data->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(val);
1170
1171         return 0;
1172 }
1173 EXPORT_SYMBOL(phy_ethtool_get_eee);
1174
1175 /**
1176  * phy_ethtool_set_eee - set EEE supported and status
1177  * @phydev: target phy_device struct
1178  * @data: ethtool_eee data
1179  *
1180  * Description: it is to program the Advertisement EEE register.
1181  */
1182 int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
1183 {
1184         int val = ethtool_adv_to_mmd_eee_adv_t(data->advertised);
1185
1186         phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN,
1187                                phydev->addr, val);
1188
1189         return 0;
1190 }
1191 EXPORT_SYMBOL(phy_ethtool_set_eee);
1192
1193 int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
1194 {
1195         if (phydev->drv->set_wol)
1196                 return phydev->drv->set_wol(phydev, wol);
1197
1198         return -EOPNOTSUPP;
1199 }
1200 EXPORT_SYMBOL(phy_ethtool_set_wol);
1201
1202 void phy_ethtool_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
1203 {
1204         if (phydev->drv->get_wol)
1205                 phydev->drv->get_wol(phydev, wol);
1206 }
1207 EXPORT_SYMBOL(phy_ethtool_get_wol);