276d7b135332c1c1c0ec4415f0594f15ffd9f1d2
[linux-drm-fsl-dcu.git] / drivers / net / ethernet / intel / ixgbe / ixgbe_sriov.c
1 /*******************************************************************************
2
3   Intel 10 Gigabit PCI Express Linux driver
4   Copyright(c) 1999 - 2013 Intel Corporation.
5
6   This program is free software; you can redistribute it and/or modify it
7   under the terms and conditions of the GNU General Public License,
8   version 2, as published by the Free Software Foundation.
9
10   This program is distributed in the hope it will be useful, but WITHOUT
11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13   more details.
14
15   You should have received a copy of the GNU General Public License along with
16   this program; if not, write to the Free Software Foundation, Inc.,
17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18
19   The full GNU General Public License is included in this distribution in
20   the file called "COPYING".
21
22   Contact Information:
23   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
24   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25
26 *******************************************************************************/
27
28 #include <linux/types.h>
29 #include <linux/module.h>
30 #include <linux/pci.h>
31 #include <linux/netdevice.h>
32 #include <linux/vmalloc.h>
33 #include <linux/string.h>
34 #include <linux/in.h>
35 #include <linux/ip.h>
36 #include <linux/tcp.h>
37 #include <linux/ipv6.h>
38 #ifdef NETIF_F_HW_VLAN_CTAG_TX
39 #include <linux/if_vlan.h>
40 #endif
41
42 #include "ixgbe.h"
43 #include "ixgbe_type.h"
44 #include "ixgbe_sriov.h"
45
46 #ifdef CONFIG_PCI_IOV
47 static int __ixgbe_enable_sriov(struct ixgbe_adapter *adapter)
48 {
49         struct ixgbe_hw *hw = &adapter->hw;
50         int num_vf_macvlans, i;
51         struct vf_macvlans *mv_list;
52
53         adapter->flags |= IXGBE_FLAG_SRIOV_ENABLED;
54         e_info(probe, "SR-IOV enabled with %d VFs\n", adapter->num_vfs);
55
56         /* Enable VMDq flag so device will be set in VM mode */
57         adapter->flags |= IXGBE_FLAG_VMDQ_ENABLED;
58         if (!adapter->ring_feature[RING_F_VMDQ].limit)
59                 adapter->ring_feature[RING_F_VMDQ].limit = 1;
60         adapter->ring_feature[RING_F_VMDQ].offset = adapter->num_vfs;
61
62         num_vf_macvlans = hw->mac.num_rar_entries -
63         (IXGBE_MAX_PF_MACVLANS + 1 + adapter->num_vfs);
64
65         adapter->mv_list = mv_list = kcalloc(num_vf_macvlans,
66                                              sizeof(struct vf_macvlans),
67                                              GFP_KERNEL);
68         if (mv_list) {
69                 /* Initialize list of VF macvlans */
70                 INIT_LIST_HEAD(&adapter->vf_mvs.l);
71                 for (i = 0; i < num_vf_macvlans; i++) {
72                         mv_list->vf = -1;
73                         mv_list->free = true;
74                         mv_list->rar_entry = hw->mac.num_rar_entries -
75                                 (i + adapter->num_vfs + 1);
76                         list_add(&mv_list->l, &adapter->vf_mvs.l);
77                         mv_list++;
78                 }
79         }
80
81         /* Initialize default switching mode VEB */
82         IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN);
83         adapter->flags2 |= IXGBE_FLAG2_BRIDGE_MODE_VEB;
84
85         /* If call to enable VFs succeeded then allocate memory
86          * for per VF control structures.
87          */
88         adapter->vfinfo =
89                 kcalloc(adapter->num_vfs,
90                         sizeof(struct vf_data_storage), GFP_KERNEL);
91         if (adapter->vfinfo) {
92                 /* limit trafffic classes based on VFs enabled */
93                 if ((adapter->hw.mac.type == ixgbe_mac_82599EB) &&
94                     (adapter->num_vfs < 16)) {
95                         adapter->dcb_cfg.num_tcs.pg_tcs = MAX_TRAFFIC_CLASS;
96                         adapter->dcb_cfg.num_tcs.pfc_tcs = MAX_TRAFFIC_CLASS;
97                 } else if (adapter->num_vfs < 32) {
98                         adapter->dcb_cfg.num_tcs.pg_tcs = 4;
99                         adapter->dcb_cfg.num_tcs.pfc_tcs = 4;
100                 } else {
101                         adapter->dcb_cfg.num_tcs.pg_tcs = 1;
102                         adapter->dcb_cfg.num_tcs.pfc_tcs = 1;
103                 }
104
105                 /* We do not support RSS w/ SR-IOV */
106                 adapter->ring_feature[RING_F_RSS].limit = 1;
107
108                 /* Disable RSC when in SR-IOV mode */
109                 adapter->flags2 &= ~(IXGBE_FLAG2_RSC_CAPABLE |
110                                      IXGBE_FLAG2_RSC_ENABLED);
111
112                 /* enable spoof checking for all VFs */
113                 for (i = 0; i < adapter->num_vfs; i++)
114                         adapter->vfinfo[i].spoofchk_enabled = true;
115                 return 0;
116         }
117
118         return -ENOMEM;
119 }
120
121 /* Note this function is called when the user wants to enable SR-IOV
122  * VFs using the now deprecated module parameter
123  */
124 void ixgbe_enable_sriov(struct ixgbe_adapter *adapter)
125 {
126         int pre_existing_vfs = 0;
127
128         pre_existing_vfs = pci_num_vf(adapter->pdev);
129         if (!pre_existing_vfs && !adapter->num_vfs)
130                 return;
131
132         if (!pre_existing_vfs)
133                 dev_warn(&adapter->pdev->dev,
134                          "Enabling SR-IOV VFs using the module parameter is deprecated - please use the pci sysfs interface.\n");
135
136         /* If there are pre-existing VFs then we have to force
137          * use of that many - over ride any module parameter value.
138          * This may result from the user unloading the PF driver
139          * while VFs were assigned to guest VMs or because the VFs
140          * have been created via the new PCI SR-IOV sysfs interface.
141          */
142         if (pre_existing_vfs) {
143                 adapter->num_vfs = pre_existing_vfs;
144                 dev_warn(&adapter->pdev->dev,
145                          "Virtual Functions already enabled for this device - Please reload all VF drivers to avoid spoofed packet errors\n");
146         } else {
147                 int err;
148                 /*
149                  * The 82599 supports up to 64 VFs per physical function
150                  * but this implementation limits allocation to 63 so that
151                  * basic networking resources are still available to the
152                  * physical function.  If the user requests greater thn
153                  * 63 VFs then it is an error - reset to default of zero.
154                  */
155                 adapter->num_vfs = min_t(unsigned int, adapter->num_vfs, 63);
156
157                 err = pci_enable_sriov(adapter->pdev, adapter->num_vfs);
158                 if (err) {
159                         e_err(probe, "Failed to enable PCI sriov: %d\n", err);
160                         adapter->num_vfs = 0;
161                         return;
162                 }
163         }
164
165         if (!__ixgbe_enable_sriov(adapter))
166                 return;
167
168         /* If we have gotten to this point then there is no memory available
169          * to manage the VF devices - print message and bail.
170          */
171         e_err(probe, "Unable to allocate memory for VF Data Storage - "
172               "SRIOV disabled\n");
173         ixgbe_disable_sriov(adapter);
174 }
175
176 #endif /* #ifdef CONFIG_PCI_IOV */
177 int ixgbe_disable_sriov(struct ixgbe_adapter *adapter)
178 {
179         struct ixgbe_hw *hw = &adapter->hw;
180         u32 gpie;
181         u32 vmdctl;
182         int rss;
183
184         /* set num VFs to 0 to prevent access to vfinfo */
185         adapter->num_vfs = 0;
186
187         /* free VF control structures */
188         kfree(adapter->vfinfo);
189         adapter->vfinfo = NULL;
190
191         /* free macvlan list */
192         kfree(adapter->mv_list);
193         adapter->mv_list = NULL;
194
195         /* if SR-IOV is already disabled then there is nothing to do */
196         if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED))
197                 return 0;
198
199 #ifdef CONFIG_PCI_IOV
200         /*
201          * If our VFs are assigned we cannot shut down SR-IOV
202          * without causing issues, so just leave the hardware
203          * available but disabled
204          */
205         if (pci_vfs_assigned(adapter->pdev)) {
206                 e_dev_warn("Unloading driver while VFs are assigned - VFs will not be deallocated\n");
207                 return -EPERM;
208         }
209         /* disable iov and allow time for transactions to clear */
210         pci_disable_sriov(adapter->pdev);
211 #endif
212
213         /* turn off device IOV mode */
214         IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, 0);
215         gpie = IXGBE_READ_REG(hw, IXGBE_GPIE);
216         gpie &= ~IXGBE_GPIE_VTMODE_MASK;
217         IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
218
219         /* set default pool back to 0 */
220         vmdctl = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
221         vmdctl &= ~IXGBE_VT_CTL_POOL_MASK;
222         IXGBE_WRITE_REG(hw, IXGBE_VT_CTL, vmdctl);
223         IXGBE_WRITE_FLUSH(hw);
224
225         /* Disable VMDq flag so device will be set in VM mode */
226         if (adapter->ring_feature[RING_F_VMDQ].limit == 1)
227                 adapter->flags &= ~IXGBE_FLAG_VMDQ_ENABLED;
228         adapter->ring_feature[RING_F_VMDQ].offset = 0;
229
230         rss = min_t(int, IXGBE_MAX_RSS_INDICES, num_online_cpus());
231         adapter->ring_feature[RING_F_RSS].limit = rss;
232
233         /* take a breather then clean up driver data */
234         msleep(100);
235
236         adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED;
237         return 0;
238 }
239
240 static int ixgbe_pci_sriov_enable(struct pci_dev *dev, int num_vfs)
241 {
242 #ifdef CONFIG_PCI_IOV
243         struct ixgbe_adapter *adapter = pci_get_drvdata(dev);
244         int err = 0;
245         int i;
246         int pre_existing_vfs = pci_num_vf(dev);
247
248         if (pre_existing_vfs && pre_existing_vfs != num_vfs)
249                 err = ixgbe_disable_sriov(adapter);
250         else if (pre_existing_vfs && pre_existing_vfs == num_vfs)
251                 goto out;
252
253         if (err)
254                 goto err_out;
255
256         /* While the SR-IOV capability structure reports total VFs to be
257          * 64 we limit the actual number that can be allocated to 63 so
258          * that some transmit/receive resources can be reserved to the
259          * PF.  The PCI bus driver already checks for other values out of
260          * range.
261          */
262         if (num_vfs > 63) {
263                 err = -EPERM;
264                 goto err_out;
265         }
266
267         adapter->num_vfs = num_vfs;
268
269         err = __ixgbe_enable_sriov(adapter);
270         if (err)
271                 goto err_out;
272
273         for (i = 0; i < adapter->num_vfs; i++)
274                 ixgbe_vf_configuration(dev, (i | 0x10000000));
275
276         err = pci_enable_sriov(dev, num_vfs);
277         if (err) {
278                 e_dev_warn("Failed to enable PCI sriov: %d\n", err);
279                 goto err_out;
280         }
281         ixgbe_sriov_reinit(adapter);
282
283 out:
284         return num_vfs;
285
286 err_out:
287         return err;
288 #endif
289         return 0;
290 }
291
292 static int ixgbe_pci_sriov_disable(struct pci_dev *dev)
293 {
294         struct ixgbe_adapter *adapter = pci_get_drvdata(dev);
295         int err;
296         u32 current_flags = adapter->flags;
297
298         err = ixgbe_disable_sriov(adapter);
299
300         /* Only reinit if no error and state changed */
301         if (!err && current_flags != adapter->flags) {
302                 /* ixgbe_disable_sriov() doesn't clear VMDQ flag */
303                 adapter->flags &= ~IXGBE_FLAG_VMDQ_ENABLED;
304 #ifdef CONFIG_PCI_IOV
305                 ixgbe_sriov_reinit(adapter);
306 #endif
307         }
308
309         return err;
310 }
311
312 int ixgbe_pci_sriov_configure(struct pci_dev *dev, int num_vfs)
313 {
314         if (num_vfs == 0)
315                 return ixgbe_pci_sriov_disable(dev);
316         else
317                 return ixgbe_pci_sriov_enable(dev, num_vfs);
318 }
319
320 static int ixgbe_set_vf_multicasts(struct ixgbe_adapter *adapter,
321                                    u32 *msgbuf, u32 vf)
322 {
323         int entries = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK)
324                        >> IXGBE_VT_MSGINFO_SHIFT;
325         u16 *hash_list = (u16 *)&msgbuf[1];
326         struct vf_data_storage *vfinfo = &adapter->vfinfo[vf];
327         struct ixgbe_hw *hw = &adapter->hw;
328         int i;
329         u32 vector_bit;
330         u32 vector_reg;
331         u32 mta_reg;
332
333         /* only so many hash values supported */
334         entries = min(entries, IXGBE_MAX_VF_MC_ENTRIES);
335
336         /*
337          * salt away the number of multi cast addresses assigned
338          * to this VF for later use to restore when the PF multi cast
339          * list changes
340          */
341         vfinfo->num_vf_mc_hashes = entries;
342
343         /*
344          * VFs are limited to using the MTA hash table for their multicast
345          * addresses
346          */
347         for (i = 0; i < entries; i++) {
348                 vfinfo->vf_mc_hashes[i] = hash_list[i];
349         }
350
351         for (i = 0; i < vfinfo->num_vf_mc_hashes; i++) {
352                 vector_reg = (vfinfo->vf_mc_hashes[i] >> 5) & 0x7F;
353                 vector_bit = vfinfo->vf_mc_hashes[i] & 0x1F;
354                 mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg));
355                 mta_reg |= (1 << vector_bit);
356                 IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg);
357         }
358
359         return 0;
360 }
361
362 static void ixgbe_restore_vf_macvlans(struct ixgbe_adapter *adapter)
363 {
364         struct ixgbe_hw *hw = &adapter->hw;
365         struct list_head *pos;
366         struct vf_macvlans *entry;
367
368         list_for_each(pos, &adapter->vf_mvs.l) {
369                 entry = list_entry(pos, struct vf_macvlans, l);
370                 if (!entry->free)
371                         hw->mac.ops.set_rar(hw, entry->rar_entry,
372                                             entry->vf_macvlan,
373                                             entry->vf, IXGBE_RAH_AV);
374         }
375 }
376
377 void ixgbe_restore_vf_multicasts(struct ixgbe_adapter *adapter)
378 {
379         struct ixgbe_hw *hw = &adapter->hw;
380         struct vf_data_storage *vfinfo;
381         int i, j;
382         u32 vector_bit;
383         u32 vector_reg;
384         u32 mta_reg;
385
386         for (i = 0; i < adapter->num_vfs; i++) {
387                 vfinfo = &adapter->vfinfo[i];
388                 for (j = 0; j < vfinfo->num_vf_mc_hashes; j++) {
389                         hw->addr_ctrl.mta_in_use++;
390                         vector_reg = (vfinfo->vf_mc_hashes[j] >> 5) & 0x7F;
391                         vector_bit = vfinfo->vf_mc_hashes[j] & 0x1F;
392                         mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg));
393                         mta_reg |= (1 << vector_bit);
394                         IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg);
395                 }
396         }
397
398         /* Restore any VF macvlans */
399         ixgbe_restore_vf_macvlans(adapter);
400 }
401
402 static int ixgbe_set_vf_vlan(struct ixgbe_adapter *adapter, int add, int vid,
403                              u32 vf)
404 {
405         /* VLAN 0 is a special case, don't allow it to be removed */
406         if (!vid && !add)
407                 return 0;
408
409         return adapter->hw.mac.ops.set_vfta(&adapter->hw, vid, vf, (bool)add);
410 }
411
412 static s32 ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf)
413 {
414         struct ixgbe_hw *hw = &adapter->hw;
415         int max_frame = msgbuf[1];
416         u32 max_frs;
417
418         /*
419          * For 82599EB we have to keep all PFs and VFs operating with
420          * the same max_frame value in order to avoid sending an oversize
421          * frame to a VF.  In order to guarantee this is handled correctly
422          * for all cases we have several special exceptions to take into
423          * account before we can enable the VF for receive
424          */
425         if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
426                 struct net_device *dev = adapter->netdev;
427                 int pf_max_frame = dev->mtu + ETH_HLEN;
428                 u32 reg_offset, vf_shift, vfre;
429                 s32 err = 0;
430
431 #ifdef CONFIG_FCOE
432                 if (dev->features & NETIF_F_FCOE_MTU)
433                         pf_max_frame = max_t(int, pf_max_frame,
434                                              IXGBE_FCOE_JUMBO_FRAME_SIZE);
435
436 #endif /* CONFIG_FCOE */
437                 switch (adapter->vfinfo[vf].vf_api) {
438                 case ixgbe_mbox_api_11:
439                         /*
440                          * Version 1.1 supports jumbo frames on VFs if PF has
441                          * jumbo frames enabled which means legacy VFs are
442                          * disabled
443                          */
444                         if (pf_max_frame > ETH_FRAME_LEN)
445                                 break;
446                 default:
447                         /*
448                          * If the PF or VF are running w/ jumbo frames enabled
449                          * we need to shut down the VF Rx path as we cannot
450                          * support jumbo frames on legacy VFs
451                          */
452                         if ((pf_max_frame > ETH_FRAME_LEN) ||
453                             (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)))
454                                 err = -EINVAL;
455                         break;
456                 }
457
458                 /* determine VF receive enable location */
459                 vf_shift = vf % 32;
460                 reg_offset = vf / 32;
461
462                 /* enable or disable receive depending on error */
463                 vfre = IXGBE_READ_REG(hw, IXGBE_VFRE(reg_offset));
464                 if (err)
465                         vfre &= ~(1 << vf_shift);
466                 else
467                         vfre |= 1 << vf_shift;
468                 IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), vfre);
469
470                 if (err) {
471                         e_err(drv, "VF max_frame %d out of range\n", max_frame);
472                         return err;
473                 }
474         }
475
476         /* MTU < 68 is an error and causes problems on some kernels */
477         if (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE) {
478                 e_err(drv, "VF max_frame %d out of range\n", max_frame);
479                 return -EINVAL;
480         }
481
482         /* pull current max frame size from hardware */
483         max_frs = IXGBE_READ_REG(hw, IXGBE_MAXFRS);
484         max_frs &= IXGBE_MHADD_MFS_MASK;
485         max_frs >>= IXGBE_MHADD_MFS_SHIFT;
486
487         if (max_frs < max_frame) {
488                 max_frs = max_frame << IXGBE_MHADD_MFS_SHIFT;
489                 IXGBE_WRITE_REG(hw, IXGBE_MAXFRS, max_frs);
490         }
491
492         e_info(hw, "VF requests change max MTU to %d\n", max_frame);
493
494         return 0;
495 }
496
497 static void ixgbe_set_vmolr(struct ixgbe_hw *hw, u32 vf, bool aupe)
498 {
499         u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf));
500         vmolr |= (IXGBE_VMOLR_ROMPE |
501                   IXGBE_VMOLR_BAM);
502         if (aupe)
503                 vmolr |= IXGBE_VMOLR_AUPE;
504         else
505                 vmolr &= ~IXGBE_VMOLR_AUPE;
506         IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr);
507 }
508
509 static void ixgbe_clear_vmvir(struct ixgbe_adapter *adapter, u32 vf)
510 {
511         struct ixgbe_hw *hw = &adapter->hw;
512
513         IXGBE_WRITE_REG(hw, IXGBE_VMVIR(vf), 0);
514 }
515 static inline void ixgbe_vf_reset_event(struct ixgbe_adapter *adapter, u32 vf)
516 {
517         struct ixgbe_hw *hw = &adapter->hw;
518         struct vf_data_storage *vfinfo = &adapter->vfinfo[vf];
519         int rar_entry = hw->mac.num_rar_entries - (vf + 1);
520         u8 num_tcs = netdev_get_num_tc(adapter->netdev);
521
522         /* add PF assigned VLAN or VLAN 0 */
523         ixgbe_set_vf_vlan(adapter, true, vfinfo->pf_vlan, vf);
524
525         /* reset offloads to defaults */
526         ixgbe_set_vmolr(hw, vf, !vfinfo->pf_vlan);
527
528         /* set outgoing tags for VFs */
529         if (!vfinfo->pf_vlan && !vfinfo->pf_qos && !num_tcs) {
530                 ixgbe_clear_vmvir(adapter, vf);
531         } else {
532                 if (vfinfo->pf_qos || !num_tcs)
533                         ixgbe_set_vmvir(adapter, vfinfo->pf_vlan,
534                                         vfinfo->pf_qos, vf);
535                 else
536                         ixgbe_set_vmvir(adapter, vfinfo->pf_vlan,
537                                         adapter->default_up, vf);
538
539                 if (vfinfo->spoofchk_enabled)
540                         hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf);
541         }
542
543         /* reset multicast table array for vf */
544         adapter->vfinfo[vf].num_vf_mc_hashes = 0;
545
546         /* Flush and reset the mta with the new values */
547         ixgbe_set_rx_mode(adapter->netdev);
548
549         hw->mac.ops.clear_rar(hw, rar_entry);
550
551         /* reset VF api back to unknown */
552         adapter->vfinfo[vf].vf_api = ixgbe_mbox_api_10;
553 }
554
555 static int ixgbe_set_vf_mac(struct ixgbe_adapter *adapter,
556                             int vf, unsigned char *mac_addr)
557 {
558         struct ixgbe_hw *hw = &adapter->hw;
559         int rar_entry = hw->mac.num_rar_entries - (vf + 1);
560
561         memcpy(adapter->vfinfo[vf].vf_mac_addresses, mac_addr, 6);
562         hw->mac.ops.set_rar(hw, rar_entry, mac_addr, vf, IXGBE_RAH_AV);
563
564         return 0;
565 }
566
567 static int ixgbe_set_vf_macvlan(struct ixgbe_adapter *adapter,
568                                 int vf, int index, unsigned char *mac_addr)
569 {
570         struct ixgbe_hw *hw = &adapter->hw;
571         struct list_head *pos;
572         struct vf_macvlans *entry;
573
574         if (index <= 1) {
575                 list_for_each(pos, &adapter->vf_mvs.l) {
576                         entry = list_entry(pos, struct vf_macvlans, l);
577                         if (entry->vf == vf) {
578                                 entry->vf = -1;
579                                 entry->free = true;
580                                 entry->is_macvlan = false;
581                                 hw->mac.ops.clear_rar(hw, entry->rar_entry);
582                         }
583                 }
584         }
585
586         /*
587          * If index was zero then we were asked to clear the uc list
588          * for the VF.  We're done.
589          */
590         if (!index)
591                 return 0;
592
593         entry = NULL;
594
595         list_for_each(pos, &adapter->vf_mvs.l) {
596                 entry = list_entry(pos, struct vf_macvlans, l);
597                 if (entry->free)
598                         break;
599         }
600
601         /*
602          * If we traversed the entire list and didn't find a free entry
603          * then we're out of space on the RAR table.  Also entry may
604          * be NULL because the original memory allocation for the list
605          * failed, which is not fatal but does mean we can't support
606          * VF requests for MACVLAN because we couldn't allocate
607          * memory for the list management required.
608          */
609         if (!entry || !entry->free)
610                 return -ENOSPC;
611
612         entry->free = false;
613         entry->is_macvlan = true;
614         entry->vf = vf;
615         memcpy(entry->vf_macvlan, mac_addr, ETH_ALEN);
616
617         hw->mac.ops.set_rar(hw, entry->rar_entry, mac_addr, vf, IXGBE_RAH_AV);
618
619         return 0;
620 }
621
622 int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask)
623 {
624         unsigned char vf_mac_addr[6];
625         struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
626         unsigned int vfn = (event_mask & 0x3f);
627
628         bool enable = ((event_mask & 0x10000000U) != 0);
629
630         if (enable) {
631                 eth_zero_addr(vf_mac_addr);
632                 memcpy(adapter->vfinfo[vfn].vf_mac_addresses, vf_mac_addr, 6);
633         }
634
635         return 0;
636 }
637
638 static int ixgbe_vf_reset_msg(struct ixgbe_adapter *adapter, u32 vf)
639 {
640         struct ixgbe_hw *hw = &adapter->hw;
641         unsigned char *vf_mac = adapter->vfinfo[vf].vf_mac_addresses;
642         u32 reg, reg_offset, vf_shift;
643         u32 msgbuf[4] = {0, 0, 0, 0};
644         u8 *addr = (u8 *)(&msgbuf[1]);
645
646         e_info(probe, "VF Reset msg received from vf %d\n", vf);
647
648         /* reset the filters for the device */
649         ixgbe_vf_reset_event(adapter, vf);
650
651         /* set vf mac address */
652         if (!is_zero_ether_addr(vf_mac))
653                 ixgbe_set_vf_mac(adapter, vf, vf_mac);
654
655         vf_shift = vf % 32;
656         reg_offset = vf / 32;
657
658         /* enable transmit for vf */
659         reg = IXGBE_READ_REG(hw, IXGBE_VFTE(reg_offset));
660         reg |= 1 << vf_shift;
661         IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset), reg);
662
663         /* enable receive for vf */
664         reg = IXGBE_READ_REG(hw, IXGBE_VFRE(reg_offset));
665         reg |= 1 << vf_shift;
666         /*
667          * The 82599 cannot support a mix of jumbo and non-jumbo PF/VFs.
668          * For more info take a look at ixgbe_set_vf_lpe
669          */
670         if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
671                 struct net_device *dev = adapter->netdev;
672                 int pf_max_frame = dev->mtu + ETH_HLEN;
673
674 #ifdef CONFIG_FCOE
675                 if (dev->features & NETIF_F_FCOE_MTU)
676                         pf_max_frame = max_t(int, pf_max_frame,
677                                              IXGBE_FCOE_JUMBO_FRAME_SIZE);
678
679 #endif /* CONFIG_FCOE */
680                 if (pf_max_frame > ETH_FRAME_LEN)
681                         reg &= ~(1 << vf_shift);
682         }
683         IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), reg);
684
685         /* enable VF mailbox for further messages */
686         adapter->vfinfo[vf].clear_to_send = true;
687
688         /* Enable counting of spoofed packets in the SSVPC register */
689         reg = IXGBE_READ_REG(hw, IXGBE_VMECM(reg_offset));
690         reg |= (1 << vf_shift);
691         IXGBE_WRITE_REG(hw, IXGBE_VMECM(reg_offset), reg);
692
693         /* reply to reset with ack and vf mac address */
694         msgbuf[0] = IXGBE_VF_RESET;
695         if (!is_zero_ether_addr(vf_mac)) {
696                 msgbuf[0] |= IXGBE_VT_MSGTYPE_ACK;
697                 memcpy(addr, vf_mac, ETH_ALEN);
698         } else {
699                 msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
700                 dev_warn(&adapter->pdev->dev,
701                          "VF %d has no MAC address assigned, you may have to assign one manually\n",
702                          vf);
703         }
704
705         /*
706          * Piggyback the multicast filter type so VF can compute the
707          * correct vectors
708          */
709         msgbuf[3] = hw->mac.mc_filter_type;
710         ixgbe_write_mbx(hw, msgbuf, IXGBE_VF_PERMADDR_MSG_LEN, vf);
711
712         return 0;
713 }
714
715 static int ixgbe_set_vf_mac_addr(struct ixgbe_adapter *adapter,
716                                  u32 *msgbuf, u32 vf)
717 {
718         u8 *new_mac = ((u8 *)(&msgbuf[1]));
719
720         if (!is_valid_ether_addr(new_mac)) {
721                 e_warn(drv, "VF %d attempted to set invalid mac\n", vf);
722                 return -1;
723         }
724
725         if (adapter->vfinfo[vf].pf_set_mac &&
726             memcmp(adapter->vfinfo[vf].vf_mac_addresses, new_mac,
727                    ETH_ALEN)) {
728                 e_warn(drv,
729                        "VF %d attempted to override administratively set MAC address\n"
730                        "Reload the VF driver to resume operations\n",
731                        vf);
732                 return -1;
733         }
734
735         return ixgbe_set_vf_mac(adapter, vf, new_mac) < 0;
736 }
737
738 static int ixgbe_find_vlvf_entry(struct ixgbe_hw *hw, u32 vlan)
739 {
740         u32 vlvf;
741         s32 regindex;
742
743         /* short cut the special case */
744         if (vlan == 0)
745                 return 0;
746
747         /* Search for the vlan id in the VLVF entries */
748         for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) {
749                 vlvf = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex));
750                 if ((vlvf & VLAN_VID_MASK) == vlan)
751                         break;
752         }
753
754         /* Return a negative value if not found */
755         if (regindex >= IXGBE_VLVF_ENTRIES)
756                 regindex = -1;
757
758         return regindex;
759 }
760
761 static int ixgbe_set_vf_vlan_msg(struct ixgbe_adapter *adapter,
762                                  u32 *msgbuf, u32 vf)
763 {
764         struct ixgbe_hw *hw = &adapter->hw;
765         int add = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) >> IXGBE_VT_MSGINFO_SHIFT;
766         int vid = (msgbuf[1] & IXGBE_VLVF_VLANID_MASK);
767         int err;
768         s32 reg_ndx;
769         u32 vlvf;
770         u32 bits;
771         u8 tcs = netdev_get_num_tc(adapter->netdev);
772
773         if (adapter->vfinfo[vf].pf_vlan || tcs) {
774                 e_warn(drv,
775                        "VF %d attempted to override administratively set VLAN configuration\n"
776                        "Reload the VF driver to resume operations\n",
777                        vf);
778                 return -1;
779         }
780
781         if (add)
782                 adapter->vfinfo[vf].vlan_count++;
783         else if (adapter->vfinfo[vf].vlan_count)
784                 adapter->vfinfo[vf].vlan_count--;
785
786         /* in case of promiscuous mode any VLAN filter set for a VF must
787          * also have the PF pool added to it.
788          */
789         if (add && adapter->netdev->flags & IFF_PROMISC)
790                 err = ixgbe_set_vf_vlan(adapter, add, vid, VMDQ_P(0));
791
792         err = ixgbe_set_vf_vlan(adapter, add, vid, vf);
793         if (!err && adapter->vfinfo[vf].spoofchk_enabled)
794                 hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf);
795
796         /* Go through all the checks to see if the VLAN filter should
797          * be wiped completely.
798          */
799         if (!add && adapter->netdev->flags & IFF_PROMISC) {
800                 reg_ndx = ixgbe_find_vlvf_entry(hw, vid);
801                 if (reg_ndx < 0)
802                         goto out;
803                 vlvf = IXGBE_READ_REG(hw, IXGBE_VLVF(reg_ndx));
804                 /* See if any other pools are set for this VLAN filter
805                  * entry other than the PF.
806                  */
807                 if (VMDQ_P(0) < 32) {
808                         bits = IXGBE_READ_REG(hw, IXGBE_VLVFB(reg_ndx * 2));
809                         bits &= ~(1 << VMDQ_P(0));
810                         bits |= IXGBE_READ_REG(hw,
811                                                IXGBE_VLVFB(reg_ndx * 2) + 1);
812                 } else {
813                         bits = IXGBE_READ_REG(hw,
814                                               IXGBE_VLVFB(reg_ndx * 2) + 1);
815                         bits &= ~(1 << (VMDQ_P(0) - 32));
816                         bits |= IXGBE_READ_REG(hw, IXGBE_VLVFB(reg_ndx * 2));
817                 }
818
819                 /* If the filter was removed then ensure PF pool bit
820                  * is cleared if the PF only added itself to the pool
821                  * because the PF is in promiscuous mode.
822                  */
823                 if ((vlvf & VLAN_VID_MASK) == vid &&
824                     !test_bit(vid, adapter->active_vlans) && !bits)
825                         ixgbe_set_vf_vlan(adapter, add, vid, VMDQ_P(0));
826         }
827
828 out:
829
830         return err;
831 }
832
833 static int ixgbe_set_vf_macvlan_msg(struct ixgbe_adapter *adapter,
834                                     u32 *msgbuf, u32 vf)
835 {
836         u8 *new_mac = ((u8 *)(&msgbuf[1]));
837         int index = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) >>
838                     IXGBE_VT_MSGINFO_SHIFT;
839         int err;
840
841         if (adapter->vfinfo[vf].pf_set_mac && index > 0) {
842                 e_warn(drv,
843                        "VF %d requested MACVLAN filter but is administratively denied\n",
844                        vf);
845                 return -1;
846         }
847
848         /* An non-zero index indicates the VF is setting a filter */
849         if (index) {
850                 if (!is_valid_ether_addr(new_mac)) {
851                         e_warn(drv, "VF %d attempted to set invalid mac\n", vf);
852                         return -1;
853                 }
854
855                 /*
856                  * If the VF is allowed to set MAC filters then turn off
857                  * anti-spoofing to avoid false positives.
858                  */
859                 if (adapter->vfinfo[vf].spoofchk_enabled)
860                         ixgbe_ndo_set_vf_spoofchk(adapter->netdev, vf, false);
861         }
862
863         err = ixgbe_set_vf_macvlan(adapter, vf, index, new_mac);
864         if (err == -ENOSPC)
865                 e_warn(drv,
866                        "VF %d has requested a MACVLAN filter but there is no space for it\n",
867                        vf);
868
869         return err < 0;
870 }
871
872 static int ixgbe_negotiate_vf_api(struct ixgbe_adapter *adapter,
873                                   u32 *msgbuf, u32 vf)
874 {
875         int api = msgbuf[1];
876
877         switch (api) {
878         case ixgbe_mbox_api_10:
879         case ixgbe_mbox_api_11:
880                 adapter->vfinfo[vf].vf_api = api;
881                 return 0;
882         default:
883                 break;
884         }
885
886         e_info(drv, "VF %d requested invalid api version %u\n", vf, api);
887
888         return -1;
889 }
890
891 static int ixgbe_get_vf_queues(struct ixgbe_adapter *adapter,
892                                u32 *msgbuf, u32 vf)
893 {
894         struct net_device *dev = adapter->netdev;
895         struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
896         unsigned int default_tc = 0;
897         u8 num_tcs = netdev_get_num_tc(dev);
898
899         /* verify the PF is supporting the correct APIs */
900         switch (adapter->vfinfo[vf].vf_api) {
901         case ixgbe_mbox_api_20:
902         case ixgbe_mbox_api_11:
903                 break;
904         default:
905                 return -1;
906         }
907
908         /* only allow 1 Tx queue for bandwidth limiting */
909         msgbuf[IXGBE_VF_TX_QUEUES] = __ALIGN_MASK(1, ~vmdq->mask);
910         msgbuf[IXGBE_VF_RX_QUEUES] = __ALIGN_MASK(1, ~vmdq->mask);
911
912         /* if TCs > 1 determine which TC belongs to default user priority */
913         if (num_tcs > 1)
914                 default_tc = netdev_get_prio_tc_map(dev, adapter->default_up);
915
916         /* notify VF of need for VLAN tag stripping, and correct queue */
917         if (num_tcs)
918                 msgbuf[IXGBE_VF_TRANS_VLAN] = num_tcs;
919         else if (adapter->vfinfo[vf].pf_vlan || adapter->vfinfo[vf].pf_qos)
920                 msgbuf[IXGBE_VF_TRANS_VLAN] = 1;
921         else
922                 msgbuf[IXGBE_VF_TRANS_VLAN] = 0;
923
924         /* notify VF of default queue */
925         msgbuf[IXGBE_VF_DEF_QUEUE] = default_tc;
926
927         return 0;
928 }
929
930 static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
931 {
932         u32 mbx_size = IXGBE_VFMAILBOX_SIZE;
933         u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
934         struct ixgbe_hw *hw = &adapter->hw;
935         s32 retval;
936
937         retval = ixgbe_read_mbx(hw, msgbuf, mbx_size, vf);
938
939         if (retval) {
940                 pr_err("Error receiving message from VF\n");
941                 return retval;
942         }
943
944         /* this is a message we already processed, do nothing */
945         if (msgbuf[0] & (IXGBE_VT_MSGTYPE_ACK | IXGBE_VT_MSGTYPE_NACK))
946                 return retval;
947
948         /* flush the ack before we write any messages back */
949         IXGBE_WRITE_FLUSH(hw);
950
951         if (msgbuf[0] == IXGBE_VF_RESET)
952                 return ixgbe_vf_reset_msg(adapter, vf);
953
954         /*
955          * until the vf completes a virtual function reset it should not be
956          * allowed to start any configuration.
957          */
958         if (!adapter->vfinfo[vf].clear_to_send) {
959                 msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
960                 ixgbe_write_mbx(hw, msgbuf, 1, vf);
961                 return retval;
962         }
963
964         switch ((msgbuf[0] & 0xFFFF)) {
965         case IXGBE_VF_SET_MAC_ADDR:
966                 retval = ixgbe_set_vf_mac_addr(adapter, msgbuf, vf);
967                 break;
968         case IXGBE_VF_SET_MULTICAST:
969                 retval = ixgbe_set_vf_multicasts(adapter, msgbuf, vf);
970                 break;
971         case IXGBE_VF_SET_VLAN:
972                 retval = ixgbe_set_vf_vlan_msg(adapter, msgbuf, vf);
973                 break;
974         case IXGBE_VF_SET_LPE:
975                 retval = ixgbe_set_vf_lpe(adapter, msgbuf, vf);
976                 break;
977         case IXGBE_VF_SET_MACVLAN:
978                 retval = ixgbe_set_vf_macvlan_msg(adapter, msgbuf, vf);
979                 break;
980         case IXGBE_VF_API_NEGOTIATE:
981                 retval = ixgbe_negotiate_vf_api(adapter, msgbuf, vf);
982                 break;
983         case IXGBE_VF_GET_QUEUES:
984                 retval = ixgbe_get_vf_queues(adapter, msgbuf, vf);
985                 break;
986         default:
987                 e_err(drv, "Unhandled Msg %8.8x\n", msgbuf[0]);
988                 retval = IXGBE_ERR_MBX;
989                 break;
990         }
991
992         /* notify the VF of the results of what it sent us */
993         if (retval)
994                 msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
995         else
996                 msgbuf[0] |= IXGBE_VT_MSGTYPE_ACK;
997
998         msgbuf[0] |= IXGBE_VT_MSGTYPE_CTS;
999
1000         ixgbe_write_mbx(hw, msgbuf, mbx_size, vf);
1001
1002         return retval;
1003 }
1004
1005 static void ixgbe_rcv_ack_from_vf(struct ixgbe_adapter *adapter, u32 vf)
1006 {
1007         struct ixgbe_hw *hw = &adapter->hw;
1008         u32 msg = IXGBE_VT_MSGTYPE_NACK;
1009
1010         /* if device isn't clear to send it shouldn't be reading either */
1011         if (!adapter->vfinfo[vf].clear_to_send)
1012                 ixgbe_write_mbx(hw, &msg, 1, vf);
1013 }
1014
1015 void ixgbe_msg_task(struct ixgbe_adapter *adapter)
1016 {
1017         struct ixgbe_hw *hw = &adapter->hw;
1018         u32 vf;
1019
1020         for (vf = 0; vf < adapter->num_vfs; vf++) {
1021                 /* process any reset requests */
1022                 if (!ixgbe_check_for_rst(hw, vf))
1023                         ixgbe_vf_reset_event(adapter, vf);
1024
1025                 /* process any messages pending */
1026                 if (!ixgbe_check_for_msg(hw, vf))
1027                         ixgbe_rcv_msg_from_vf(adapter, vf);
1028
1029                 /* process any acks */
1030                 if (!ixgbe_check_for_ack(hw, vf))
1031                         ixgbe_rcv_ack_from_vf(adapter, vf);
1032         }
1033 }
1034
1035 void ixgbe_disable_tx_rx(struct ixgbe_adapter *adapter)
1036 {
1037         struct ixgbe_hw *hw = &adapter->hw;
1038
1039         /* disable transmit and receive for all vfs */
1040         IXGBE_WRITE_REG(hw, IXGBE_VFTE(0), 0);
1041         IXGBE_WRITE_REG(hw, IXGBE_VFTE(1), 0);
1042
1043         IXGBE_WRITE_REG(hw, IXGBE_VFRE(0), 0);
1044         IXGBE_WRITE_REG(hw, IXGBE_VFRE(1), 0);
1045 }
1046
1047 void ixgbe_ping_all_vfs(struct ixgbe_adapter *adapter)
1048 {
1049         struct ixgbe_hw *hw = &adapter->hw;
1050         u32 ping;
1051         int i;
1052
1053         for (i = 0 ; i < adapter->num_vfs; i++) {
1054                 ping = IXGBE_PF_CONTROL_MSG;
1055                 if (adapter->vfinfo[i].clear_to_send)
1056                         ping |= IXGBE_VT_MSGTYPE_CTS;
1057                 ixgbe_write_mbx(hw, &ping, 1, i);
1058         }
1059 }
1060
1061 int ixgbe_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
1062 {
1063         struct ixgbe_adapter *adapter = netdev_priv(netdev);
1064         if (!is_valid_ether_addr(mac) || (vf >= adapter->num_vfs))
1065                 return -EINVAL;
1066         adapter->vfinfo[vf].pf_set_mac = true;
1067         dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n", mac, vf);
1068         dev_info(&adapter->pdev->dev, "Reload the VF driver to make this"
1069                                       " change effective.");
1070         if (test_bit(__IXGBE_DOWN, &adapter->state)) {
1071                 dev_warn(&adapter->pdev->dev, "The VF MAC address has been set,"
1072                          " but the PF device is not up.\n");
1073                 dev_warn(&adapter->pdev->dev, "Bring the PF device up before"
1074                          " attempting to use the VF device.\n");
1075         }
1076         return ixgbe_set_vf_mac(adapter, vf, mac);
1077 }
1078
1079 int ixgbe_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos)
1080 {
1081         int err = 0;
1082         struct ixgbe_adapter *adapter = netdev_priv(netdev);
1083         struct ixgbe_hw *hw = &adapter->hw;
1084
1085         if ((vf >= adapter->num_vfs) || (vlan > 4095) || (qos > 7))
1086                 return -EINVAL;
1087         if (vlan || qos) {
1088                 if (adapter->vfinfo[vf].pf_vlan)
1089                         err = ixgbe_set_vf_vlan(adapter, false,
1090                                                 adapter->vfinfo[vf].pf_vlan,
1091                                                 vf);
1092                 if (err)
1093                         goto out;
1094                 err = ixgbe_set_vf_vlan(adapter, true, vlan, vf);
1095                 if (err)
1096                         goto out;
1097                 ixgbe_set_vmvir(adapter, vlan, qos, vf);
1098                 ixgbe_set_vmolr(hw, vf, false);
1099                 if (adapter->vfinfo[vf].spoofchk_enabled)
1100                         hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf);
1101                 adapter->vfinfo[vf].vlan_count++;
1102                 adapter->vfinfo[vf].pf_vlan = vlan;
1103                 adapter->vfinfo[vf].pf_qos = qos;
1104                 dev_info(&adapter->pdev->dev,
1105                          "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan, qos, vf);
1106                 if (test_bit(__IXGBE_DOWN, &adapter->state)) {
1107                         dev_warn(&adapter->pdev->dev,
1108                                  "The VF VLAN has been set,"
1109                                  " but the PF device is not up.\n");
1110                         dev_warn(&adapter->pdev->dev,
1111                                  "Bring the PF device up before"
1112                                  " attempting to use the VF device.\n");
1113                 }
1114         } else {
1115                 err = ixgbe_set_vf_vlan(adapter, false,
1116                                         adapter->vfinfo[vf].pf_vlan, vf);
1117                 ixgbe_clear_vmvir(adapter, vf);
1118                 ixgbe_set_vmolr(hw, vf, true);
1119                 hw->mac.ops.set_vlan_anti_spoofing(hw, false, vf);
1120                 if (adapter->vfinfo[vf].vlan_count)
1121                         adapter->vfinfo[vf].vlan_count--;
1122                 adapter->vfinfo[vf].pf_vlan = 0;
1123                 adapter->vfinfo[vf].pf_qos = 0;
1124        }
1125 out:
1126        return err;
1127 }
1128
1129 static int ixgbe_link_mbps(struct ixgbe_adapter *adapter)
1130 {
1131         switch (adapter->link_speed) {
1132         case IXGBE_LINK_SPEED_100_FULL:
1133                 return 100;
1134         case IXGBE_LINK_SPEED_1GB_FULL:
1135                 return 1000;
1136         case IXGBE_LINK_SPEED_10GB_FULL:
1137                 return 10000;
1138         default:
1139                 return 0;
1140         }
1141 }
1142
1143 static void ixgbe_set_vf_rate_limit(struct ixgbe_adapter *adapter, int vf)
1144 {
1145         struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
1146         struct ixgbe_hw *hw = &adapter->hw;
1147         u32 bcnrc_val = 0;
1148         u16 queue, queues_per_pool;
1149         u16 tx_rate = adapter->vfinfo[vf].tx_rate;
1150
1151         if (tx_rate) {
1152                 /* start with base link speed value */
1153                 bcnrc_val = adapter->vf_rate_link_speed;
1154
1155                 /* Calculate the rate factor values to set */
1156                 bcnrc_val <<= IXGBE_RTTBCNRC_RF_INT_SHIFT;
1157                 bcnrc_val /= tx_rate;
1158
1159                 /* clear everything but the rate factor */
1160                 bcnrc_val &= IXGBE_RTTBCNRC_RF_INT_MASK |
1161                              IXGBE_RTTBCNRC_RF_DEC_MASK;
1162
1163                 /* enable the rate scheduler */
1164                 bcnrc_val |= IXGBE_RTTBCNRC_RS_ENA;
1165         }
1166
1167         /*
1168          * Set global transmit compensation time to the MMW_SIZE in RTTBCNRM
1169          * register. Typically MMW_SIZE=0x014 if 9728-byte jumbo is supported
1170          * and 0x004 otherwise.
1171          */
1172         switch (hw->mac.type) {
1173         case ixgbe_mac_82599EB:
1174                 IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRM, 0x4);
1175                 break;
1176         case ixgbe_mac_X540:
1177                 IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRM, 0x14);
1178                 break;
1179         default:
1180                 break;
1181         }
1182
1183         /* determine how many queues per pool based on VMDq mask */
1184         queues_per_pool = __ALIGN_MASK(1, ~vmdq->mask);
1185
1186         /* write value for all Tx queues belonging to VF */
1187         for (queue = 0; queue < queues_per_pool; queue++) {
1188                 unsigned int reg_idx = (vf * queues_per_pool) + queue;
1189
1190                 IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, reg_idx);
1191                 IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, bcnrc_val);
1192         }
1193 }
1194
1195 void ixgbe_check_vf_rate_limit(struct ixgbe_adapter *adapter)
1196 {
1197         int i;
1198
1199         /* VF Tx rate limit was not set */
1200         if (!adapter->vf_rate_link_speed)
1201                 return;
1202
1203         if (ixgbe_link_mbps(adapter) != adapter->vf_rate_link_speed) {
1204                 adapter->vf_rate_link_speed = 0;
1205                 dev_info(&adapter->pdev->dev,
1206                          "Link speed has been changed. VF Transmit rate is disabled\n");
1207         }
1208
1209         for (i = 0; i < adapter->num_vfs; i++) {
1210                 if (!adapter->vf_rate_link_speed)
1211                         adapter->vfinfo[i].tx_rate = 0;
1212
1213                 ixgbe_set_vf_rate_limit(adapter, i);
1214         }
1215 }
1216
1217 int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate)
1218 {
1219         struct ixgbe_adapter *adapter = netdev_priv(netdev);
1220         int link_speed;
1221
1222         /* verify VF is active */
1223         if (vf >= adapter->num_vfs)
1224                 return -EINVAL;
1225
1226         /* verify link is up */
1227         if (!adapter->link_up)
1228                 return -EINVAL;
1229
1230         /* verify we are linked at 10Gbps */
1231         link_speed = ixgbe_link_mbps(adapter);
1232         if (link_speed != 10000)
1233                 return -EINVAL;
1234
1235         /* rate limit cannot be less than 10Mbs or greater than link speed */
1236         if (tx_rate && ((tx_rate <= 10) || (tx_rate > link_speed)))
1237                 return -EINVAL;
1238
1239         /* store values */
1240         adapter->vf_rate_link_speed = link_speed;
1241         adapter->vfinfo[vf].tx_rate = tx_rate;
1242
1243         /* update hardware configuration */
1244         ixgbe_set_vf_rate_limit(adapter, vf);
1245
1246         return 0;
1247 }
1248
1249 int ixgbe_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, bool setting)
1250 {
1251         struct ixgbe_adapter *adapter = netdev_priv(netdev);
1252         int vf_target_reg = vf >> 3;
1253         int vf_target_shift = vf % 8;
1254         struct ixgbe_hw *hw = &adapter->hw;
1255         u32 regval;
1256
1257         adapter->vfinfo[vf].spoofchk_enabled = setting;
1258
1259         regval = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg));
1260         regval &= ~(1 << vf_target_shift);
1261         regval |= (setting << vf_target_shift);
1262         IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), regval);
1263
1264         if (adapter->vfinfo[vf].vlan_count) {
1265                 vf_target_shift += IXGBE_SPOOF_VLANAS_SHIFT;
1266                 regval = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg));
1267                 regval &= ~(1 << vf_target_shift);
1268                 regval |= (setting << vf_target_shift);
1269                 IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), regval);
1270         }
1271
1272         return 0;
1273 }
1274
1275 int ixgbe_ndo_get_vf_config(struct net_device *netdev,
1276                             int vf, struct ifla_vf_info *ivi)
1277 {
1278         struct ixgbe_adapter *adapter = netdev_priv(netdev);
1279         if (vf >= adapter->num_vfs)
1280                 return -EINVAL;
1281         ivi->vf = vf;
1282         memcpy(&ivi->mac, adapter->vfinfo[vf].vf_mac_addresses, ETH_ALEN);
1283         ivi->tx_rate = adapter->vfinfo[vf].tx_rate;
1284         ivi->vlan = adapter->vfinfo[vf].pf_vlan;
1285         ivi->qos = adapter->vfinfo[vf].pf_qos;
1286         ivi->spoofchk = adapter->vfinfo[vf].spoofchk_enabled;
1287         return 0;
1288 }