2 * Copyright 2004-2009 Analog Devices Inc.
3 * 2005 National ICT Australia (NICTA)
4 * Aidan Williams <aidan@nicta.com.au>
6 * Licensed under the GPL-2 or later.
9 #include <linux/device.h>
10 #include <linux/export.h>
11 #include <linux/kernel.h>
12 #include <linux/platform_device.h>
14 #include <linux/mtd/mtd.h>
15 #include <linux/mtd/nand.h>
16 #include <linux/mtd/partitions.h>
17 #include <linux/mtd/plat-ram.h>
18 #include <linux/mtd/physmap.h>
19 #include <linux/spi/spi.h>
20 #include <linux/spi/flash.h>
21 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
22 #include <linux/usb/isp1362.h>
24 #include <linux/i2c.h>
25 #include <linux/i2c/adp5588.h>
26 #include <linux/etherdevice.h>
27 #include <linux/ata_platform.h>
28 #include <linux/irq.h>
29 #include <linux/interrupt.h>
30 #include <linux/usb/sl811.h>
31 #include <linux/spi/mmc_spi.h>
32 #include <linux/leds.h>
33 #include <linux/input.h>
35 #include <asm/bfin5xx_spi.h>
36 #include <asm/reboot.h>
37 #include <asm/portmux.h>
39 #include <asm/bfin_sport.h>
40 #ifdef CONFIG_REGULATOR_FIXED_VOLTAGE
41 #include <linux/regulator/fixed.h>
43 #include <linux/regulator/machine.h>
44 #include <linux/regulator/consumer.h>
45 #include <linux/regulator/userspace-consumer.h>
48 * Name the Board for the /proc/cpuinfo
50 const char bfin_board_name[] = "ADI BF537-STAMP";
53 * Driver needs to know address, irq and flag pin.
56 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
57 #include <linux/usb/isp1760.h>
58 static struct resource bfin_isp1760_resources[] = {
61 .end = 0x203C0000 + 0x000fffff,
62 .flags = IORESOURCE_MEM,
67 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
71 static struct isp1760_platform_data isp1760_priv = {
76 .dack_polarity_high = 0,
77 .dreq_polarity_high = 0,
80 static struct platform_device bfin_isp1760_device = {
84 .platform_data = &isp1760_priv,
86 .num_resources = ARRAY_SIZE(bfin_isp1760_resources),
87 .resource = bfin_isp1760_resources,
91 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
92 #include <linux/gpio_keys.h>
94 static struct gpio_keys_button bfin_gpio_keys_table[] = {
95 {BTN_0, GPIO_PF2, 1, "gpio-keys: BTN0"},
96 {BTN_1, GPIO_PF3, 1, "gpio-keys: BTN1"},
97 {BTN_2, GPIO_PF4, 1, "gpio-keys: BTN2"},
98 {BTN_3, GPIO_PF5, 1, "gpio-keys: BTN3"},
101 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
102 .buttons = bfin_gpio_keys_table,
103 .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table),
106 static struct platform_device bfin_device_gpiokeys = {
109 .platform_data = &bfin_gpio_keys_data,
114 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
115 static struct resource bfin_pcmcia_cf_resources[] = {
117 .start = 0x20310000, /* IO PORT */
119 .flags = IORESOURCE_MEM,
121 .start = 0x20311000, /* Attribute Memory */
123 .flags = IORESOURCE_MEM,
127 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
129 .start = 6, /* Card Detect PF6 */
131 .flags = IORESOURCE_IRQ,
135 static struct platform_device bfin_pcmcia_cf_device = {
136 .name = "bfin_cf_pcmcia",
138 .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
139 .resource = bfin_pcmcia_cf_resources,
143 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
144 static struct platform_device rtc_device = {
150 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
151 #include <linux/smc91x.h>
153 static struct smc91x_platdata smc91x_info = {
154 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
155 .leda = RPC_LED_100_10,
156 .ledb = RPC_LED_TX_RX,
159 static struct resource smc91x_resources[] = {
161 .name = "smc91x-regs",
163 .end = 0x20300300 + 16,
164 .flags = IORESOURCE_MEM,
169 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
172 static struct platform_device smc91x_device = {
175 .num_resources = ARRAY_SIZE(smc91x_resources),
176 .resource = smc91x_resources,
178 .platform_data = &smc91x_info,
183 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
184 static struct resource dm9000_resources[] = {
187 .end = 0x203FB800 + 1,
188 .flags = IORESOURCE_MEM,
192 .end = 0x203FB804 + 1,
193 .flags = IORESOURCE_MEM,
198 .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
202 static struct platform_device dm9000_device = {
205 .num_resources = ARRAY_SIZE(dm9000_resources),
206 .resource = dm9000_resources,
210 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
211 static struct resource sl811_hcd_resources[] = {
215 .flags = IORESOURCE_MEM,
219 .flags = IORESOURCE_MEM,
223 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
227 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
228 void sl811_port_power(struct device *dev, int is_on)
230 gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
231 gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
235 static struct sl811_platform_data sl811_priv = {
237 .power = 250, /* == 500mA */
238 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
239 .port_power = &sl811_port_power,
243 static struct platform_device sl811_hcd_device = {
247 .platform_data = &sl811_priv,
249 .num_resources = ARRAY_SIZE(sl811_hcd_resources),
250 .resource = sl811_hcd_resources,
254 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
255 static struct resource isp1362_hcd_resources[] = {
259 .flags = IORESOURCE_MEM,
263 .flags = IORESOURCE_MEM,
267 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
271 static struct isp1362_platform_data isp1362_priv = {
276 .int_edge_triggered = 0,
277 .remote_wakeup_connected = 0,
278 .no_power_switching = 1,
279 .power_switching_mode = 0,
282 static struct platform_device isp1362_hcd_device = {
283 .name = "isp1362-hcd",
286 .platform_data = &isp1362_priv,
288 .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
289 .resource = isp1362_hcd_resources,
293 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
294 static unsigned short bfin_can_peripherals[] = {
295 P_CAN0_RX, P_CAN0_TX, 0
298 static struct resource bfin_can_resources[] = {
302 .flags = IORESOURCE_MEM,
307 .flags = IORESOURCE_IRQ,
312 .flags = IORESOURCE_IRQ,
315 .start = IRQ_CAN_ERROR,
316 .end = IRQ_CAN_ERROR,
317 .flags = IORESOURCE_IRQ,
321 static struct platform_device bfin_can_device = {
323 .num_resources = ARRAY_SIZE(bfin_can_resources),
324 .resource = bfin_can_resources,
326 .platform_data = &bfin_can_peripherals, /* Passed to driver */
331 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
332 #include <linux/bfin_mac.h>
333 static const unsigned short bfin_mac_peripherals[] = P_MII0;
335 static struct bfin_phydev_platform_data bfin_phydev_data[] = {
338 .irq = PHY_POLL, /* IRQ_MAC_PHYINT */
342 static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
344 .phydev_data = bfin_phydev_data,
345 .phy_mode = PHY_INTERFACE_MODE_MII,
346 .mac_peripherals = bfin_mac_peripherals,
349 static struct platform_device bfin_mii_bus = {
350 .name = "bfin_mii_bus",
352 .platform_data = &bfin_mii_bus_data,
356 static struct platform_device bfin_mac_device = {
359 .platform_data = &bfin_mii_bus,
364 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
365 static struct resource net2272_bfin_resources[] = {
368 .end = 0x20300000 + 0x100,
369 .flags = IORESOURCE_MEM,
372 .flags = IORESOURCE_BUS,
376 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
380 static struct platform_device net2272_bfin_device = {
383 .num_resources = ARRAY_SIZE(net2272_bfin_resources),
384 .resource = net2272_bfin_resources,
388 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
389 const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
391 static struct mtd_partition bfin_plat_nand_partitions[] = {
393 .name = "linux kernel(nand)",
397 .name = "file system(nand)",
398 .size = MTDPART_SIZ_FULL,
399 .offset = MTDPART_OFS_APPEND,
403 #define BFIN_NAND_PLAT_CLE 2
404 #define BFIN_NAND_PLAT_ALE 1
405 static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
407 struct nand_chip *this = mtd->priv;
409 if (cmd == NAND_CMD_NONE)
413 writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE));
415 writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE));
418 #define BFIN_NAND_PLAT_READY GPIO_PF3
419 static int bfin_plat_nand_dev_ready(struct mtd_info *mtd)
421 return gpio_get_value(BFIN_NAND_PLAT_READY);
424 static struct platform_nand_data bfin_plat_nand_data = {
428 .part_probe_types = part_probes,
429 .partitions = bfin_plat_nand_partitions,
430 .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
433 .cmd_ctrl = bfin_plat_nand_cmd_ctrl,
434 .dev_ready = bfin_plat_nand_dev_ready,
438 #define MAX(x, y) (x > y ? x : y)
439 static struct resource bfin_plat_nand_resources = {
441 .end = 0x20212000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
442 .flags = IORESOURCE_MEM,
445 static struct platform_device bfin_async_nand_device = {
449 .resource = &bfin_plat_nand_resources,
451 .platform_data = &bfin_plat_nand_data,
455 static void bfin_plat_nand_init(void)
457 gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat");
458 gpio_direction_input(BFIN_NAND_PLAT_READY);
461 static void bfin_plat_nand_init(void) {}
464 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
465 static struct mtd_partition stamp_partitions[] = {
467 .name = "bootloader(nor)",
471 .name = "linux kernel(nor)",
473 .offset = MTDPART_OFS_APPEND,
475 .name = "file system(nor)",
476 .size = 0x400000 - 0x40000 - 0x180000 - 0x10000,
477 .offset = MTDPART_OFS_APPEND,
479 .name = "MAC Address(nor)",
480 .size = MTDPART_SIZ_FULL,
482 .mask_flags = MTD_WRITEABLE,
486 static struct physmap_flash_data stamp_flash_data = {
488 .parts = stamp_partitions,
489 .nr_parts = ARRAY_SIZE(stamp_partitions),
490 #ifdef CONFIG_ROMKERNEL
491 .probe_type = "map_rom",
495 static struct resource stamp_flash_resource = {
498 .flags = IORESOURCE_MEM,
501 static struct platform_device stamp_flash_device = {
502 .name = "physmap-flash",
505 .platform_data = &stamp_flash_data,
508 .resource = &stamp_flash_resource,
512 #if defined(CONFIG_MTD_M25P80) \
513 || defined(CONFIG_MTD_M25P80_MODULE)
514 static struct mtd_partition bfin_spi_flash_partitions[] = {
516 .name = "bootloader(spi)",
519 .mask_flags = MTD_CAP_ROM
521 .name = "linux kernel(spi)",
523 .offset = MTDPART_OFS_APPEND,
525 .name = "file system(spi)",
526 .size = MTDPART_SIZ_FULL,
527 .offset = MTDPART_OFS_APPEND,
531 static struct flash_platform_data bfin_spi_flash_data = {
533 .parts = bfin_spi_flash_partitions,
534 .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
535 /* .type = "m25p64", */
538 /* SPI flash chip (m25p64) */
539 static struct bfin5xx_spi_chip spi_flash_chip_info = {
540 .enable_dma = 0, /* use dma transfer with this chip*/
544 #if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
545 #include <linux/input/ad714x.h>
547 static struct ad714x_slider_plat ad7147_spi_slider_plat[] = {
555 static struct ad714x_button_plat ad7147_spi_button_plat[] = {
557 .keycode = BTN_FORWARD,
567 .keycode = BTN_MIDDLE,
572 .keycode = BTN_RIGHT,
582 static struct ad714x_platform_data ad7147_spi_platform_data = {
585 .slider = ad7147_spi_slider_plat,
586 .button = ad7147_spi_button_plat,
588 {0xFBFF, 0x1FFF, 0, 0x2626, 1600, 1600, 1600, 1600},
589 {0xEFFF, 0x1FFF, 0, 0x2626, 1650, 1650, 1650, 1650},
590 {0xFFFF, 0x1FFE, 0, 0x2626, 1650, 1650, 1650, 1650},
591 {0xFFFF, 0x1FFB, 0, 0x2626, 1650, 1650, 1650, 1650},
592 {0xFFFF, 0x1FEF, 0, 0x2626, 1650, 1650, 1650, 1650},
593 {0xFFFF, 0x1FBF, 0, 0x2626, 1650, 1650, 1650, 1650},
594 {0xFFFF, 0x1EFF, 0, 0x2626, 1650, 1650, 1650, 1650},
595 {0xFFFF, 0x1BFF, 0, 0x2626, 1600, 1600, 1600, 1600},
596 {0xFF7B, 0x3FFF, 0x506, 0x2626, 1100, 1100, 1150, 1150},
597 {0xFDFE, 0x3FFF, 0x606, 0x2626, 1100, 1100, 1150, 1150},
598 {0xFEBA, 0x1FFF, 0x1400, 0x2626, 1200, 1200, 1300, 1300},
599 {0xFFEF, 0x1FFF, 0x0, 0x2626, 1100, 1100, 1150, 1150},
601 .sys_cfg_reg = {0x2B2, 0x0, 0x3233, 0x819, 0x832, 0xCFF, 0xCFF, 0x0},
605 #if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
606 #include <linux/input/ad714x.h>
607 static struct ad714x_button_plat ad7142_i2c_button_plat[] = {
629 static struct ad714x_platform_data ad7142_i2c_platform_data = {
631 .button = ad7142_i2c_button_plat,
633 /* fixme: figure out right setting for all comoponent according
634 * to hardware feature of EVAL-AD7142EB board */
635 {0xE7FF, 0x3FFF, 0x0005, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
636 {0xFDBF, 0x3FFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
637 {0xFFFF, 0x2DFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
638 {0xFFFF, 0x37BF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
639 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
640 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
641 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
642 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
643 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
644 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
645 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
646 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
648 .sys_cfg_reg = {0x0B2, 0x0, 0x690, 0x664, 0x290F, 0xF, 0xF, 0x0},
652 #if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE)
653 static struct bfin5xx_spi_chip ad2s90_spi_chip_info = {
658 #if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE)
659 static unsigned short ad2s120x_platform_data[] = {
660 /* used as SAMPLE and RDVEL */
661 GPIO_PF5, GPIO_PF6, 0
664 static struct bfin5xx_spi_chip ad2s120x_spi_chip_info = {
669 #if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE)
670 static unsigned short ad2s1210_platform_data[] = {
671 /* use as SAMPLE, A0, A1 */
672 GPIO_PF7, GPIO_PF8, GPIO_PF9,
673 # if defined(CONFIG_AD2S1210_GPIO_INPUT) || defined(CONFIG_AD2S1210_GPIO_OUTPUT)
674 /* the RES0 and RES1 pins */
680 static struct bfin5xx_spi_chip ad2s1210_spi_chip_info = {
685 #if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE)
686 static struct bfin5xx_spi_chip ad7314_spi_chip_info = {
691 #if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE)
692 static unsigned short ad7816_platform_data[] = {
693 GPIO_PF4, /* rdwr_pin */
694 GPIO_PF5, /* convert_pin */
695 GPIO_PF7, /* busy_pin */
699 static struct bfin5xx_spi_chip ad7816_spi_chip_info = {
704 #if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE)
705 static unsigned long adt7310_platform_data[3] = {
706 /* INT bound temperature alarm event. line 1 */
707 IRQ_PG4, IRQF_TRIGGER_LOW,
708 /* CT bound temperature alarm event irq_flags. line 0 */
712 static struct bfin5xx_spi_chip adt7310_spi_chip_info = {
717 #if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE)
718 static unsigned short ad7298_platform_data[] = {
719 GPIO_PF7, /* busy_pin */
724 #if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE)
725 static unsigned long adt7316_spi_data[2] = {
726 IRQF_TRIGGER_LOW, /* interrupt flags */
727 GPIO_PF7, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */
730 static struct bfin5xx_spi_chip adt7316_spi_chip_info = {
735 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
736 #define MMC_SPI_CARD_DETECT_INT IRQ_PF5
738 static int bfin_mmc_spi_init(struct device *dev,
739 irqreturn_t (*detect_int)(int, void *), void *data)
741 return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int,
742 IRQF_TRIGGER_FALLING, "mmc-spi-detect", data);
745 static void bfin_mmc_spi_exit(struct device *dev, void *data)
747 free_irq(MMC_SPI_CARD_DETECT_INT, data);
750 static struct mmc_spi_platform_data bfin_mmc_spi_pdata = {
751 .init = bfin_mmc_spi_init,
752 .exit = bfin_mmc_spi_exit,
753 .detect_delay = 100, /* msecs */
756 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
762 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
763 #include <linux/spi/ad7877.h>
764 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
766 .vref_delay_usecs = 50, /* internal, no capacitor */
769 .pressure_max = 1000,
771 .stopacq_polarity = 1,
772 .first_conversion_delay = 3,
773 .acquisition_time = 1,
775 .pen_down_acc_interval = 1,
779 #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
780 #include <linux/spi/ad7879.h>
781 static const struct ad7879_platform_data bfin_ad7879_ts_info = {
782 .model = 7879, /* Model = AD7879 */
783 .x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */
784 .pressure_max = 10000,
786 .first_conversion_delay = 3, /* wait 512us before do a first conversion */
787 .acquisition_time = 1, /* 4us acquisition time per sample */
788 .median = 2, /* do 8 measurements */
789 .averaging = 1, /* take the average of 4 middle samples */
790 .pen_down_acc_interval = 255, /* 9.4 ms */
791 .gpio_export = 1, /* Export GPIO to gpiolib */
792 .gpio_base = -1, /* Dynamic allocation */
796 #if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
797 #include <linux/input/adxl34x.h>
798 static const struct adxl34x_platform_data adxl34x_info = {
802 .tap_threshold = 0x31,
803 .tap_duration = 0x10,
806 .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
807 .act_axis_control = 0xFF,
808 .activity_threshold = 5,
809 .inactivity_threshold = 3,
810 .inactivity_time = 4,
811 .free_fall_threshold = 0x7,
812 .free_fall_time = 0x20,
814 .data_range = ADXL_FULL_RES,
817 .ev_code_x = ABS_X, /* EV_REL */
818 .ev_code_y = ABS_Y, /* EV_REL */
819 .ev_code_z = ABS_Z, /* EV_REL */
821 .ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */
823 /* .ev_code_ff = KEY_F,*/ /* EV_KEY */
824 /* .ev_code_act_inactivity = KEY_A,*/ /* EV_KEY */
825 .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
826 .fifo_mode = ADXL_FIFO_STREAM,
827 .orientation_enable = ADXL_EN_ORIENTATION_3D,
828 .deadzone_angle = ADXL_DEADZONE_ANGLE_10p8,
829 .divisor_length = ADXL_LP_FILTER_DIVISOR_16,
830 /* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */
831 .ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C},
835 #if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
836 static struct bfin5xx_spi_chip enc28j60_spi_chip_info = {
841 #if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE)
842 #include <linux/spi/adf702x.h>
843 #define TXREG 0x0160A470
844 static const u32 adf7021_regs[] = {
863 static struct adf702x_platform_data adf7021_platform_data = {
864 .regs_base = (void *)SPORT1_TCR1,
865 .dma_ch_rx = CH_SPORT1_RX,
866 .dma_ch_tx = CH_SPORT1_TX,
867 .irq_sport_err = IRQ_SPORT1_ERROR,
868 .gpio_int_rfs = GPIO_PF8,
869 .pin_req = {P_SPORT1_DTPRI, P_SPORT1_RFS, P_SPORT1_DRPRI,
870 P_SPORT1_RSCLK, P_SPORT1_TSCLK, 0},
871 .adf702x_model = MODEL_ADF7021,
872 .adf702x_regs = adf7021_regs,
875 static inline void adf702x_mac_init(void)
877 eth_random_addr(adf7021_platform_data.mac_addr);
880 static inline void adf702x_mac_init(void) {}
883 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
884 #include <linux/spi/ads7846.h>
885 static int ads7873_get_pendown_state(void)
887 return gpio_get_value(GPIO_PF6);
890 static struct ads7846_platform_data __initdata ad7873_pdata = {
891 .model = 7873, /* AD7873 */
897 .debounce_tol = (~0),
898 .get_pendown_state = ads7873_get_pendown_state,
902 #if defined(CONFIG_MTD_DATAFLASH) \
903 || defined(CONFIG_MTD_DATAFLASH_MODULE)
905 static struct mtd_partition bfin_spi_dataflash_partitions[] = {
907 .name = "bootloader(spi)",
910 .mask_flags = MTD_CAP_ROM
912 .name = "linux kernel(spi)",
914 .offset = MTDPART_OFS_APPEND,
916 .name = "file system(spi)",
917 .size = MTDPART_SIZ_FULL,
918 .offset = MTDPART_OFS_APPEND,
922 static struct flash_platform_data bfin_spi_dataflash_data = {
923 .name = "SPI Dataflash",
924 .parts = bfin_spi_dataflash_partitions,
925 .nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions),
929 static struct bfin5xx_spi_chip data_flash_chip_info = {
930 .enable_dma = 0, /* use dma transfer with this chip*/
934 #if defined(CONFIG_AD7476) || defined(CONFIG_AD7476_MODULE)
935 static struct bfin5xx_spi_chip spi_ad7476_chip_info = {
936 .enable_dma = 0, /* use dma transfer with this chip*/
940 static struct spi_board_info bfin_spi_board_info[] __initdata = {
941 #if defined(CONFIG_MTD_M25P80) \
942 || defined(CONFIG_MTD_M25P80_MODULE)
944 /* the modalias must be the same as spi device driver name */
945 .modalias = "m25p80", /* Name of spi_driver for this device */
946 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
947 .bus_num = 0, /* Framework bus number */
948 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
949 .platform_data = &bfin_spi_flash_data,
950 .controller_data = &spi_flash_chip_info,
954 #if defined(CONFIG_MTD_DATAFLASH) \
955 || defined(CONFIG_MTD_DATAFLASH_MODULE)
956 { /* DataFlash chip */
957 .modalias = "mtd_dataflash",
958 .max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */
959 .bus_num = 0, /* Framework bus number */
960 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
961 .platform_data = &bfin_spi_dataflash_data,
962 .controller_data = &data_flash_chip_info,
967 #if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
968 || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
970 .modalias = "ad1836",
971 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
974 .platform_data = "ad1836", /* only includes chip name for the moment */
979 #ifdef CONFIG_SND_SOC_AD193X_SPI
981 .modalias = "ad193x",
982 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
989 #if defined(CONFIG_SND_SOC_ADAV80X) || defined(CONFIG_SND_SOC_ADV80X_MODULE)
991 .modalias = "adav801",
992 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
999 #if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
1001 .modalias = "ad714x_captouch",
1002 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1007 .platform_data = &ad7147_spi_platform_data,
1011 #if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE)
1013 .modalias = "ad2s90",
1015 .chip_select = 3, /* change it for your board */
1017 .platform_data = NULL,
1018 .controller_data = &ad2s90_spi_chip_info,
1022 #if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE)
1024 .modalias = "ad2s120x",
1026 .chip_select = 4, /* CS, change it for your board */
1027 .platform_data = ad2s120x_platform_data,
1028 .controller_data = &ad2s120x_spi_chip_info,
1032 #if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE)
1034 .modalias = "ad2s1210",
1035 .max_speed_hz = 8192000,
1037 .chip_select = 4, /* CS, change it for your board */
1038 .platform_data = ad2s1210_platform_data,
1039 .controller_data = &ad2s1210_spi_chip_info,
1043 #if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE)
1045 .modalias = "ad7314",
1046 .max_speed_hz = 1000000,
1048 .chip_select = 4, /* CS, change it for your board */
1049 .controller_data = &ad7314_spi_chip_info,
1054 #if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE)
1056 .modalias = "ad7818",
1057 .max_speed_hz = 1000000,
1059 .chip_select = 4, /* CS, change it for your board */
1060 .platform_data = ad7816_platform_data,
1061 .controller_data = &ad7816_spi_chip_info,
1066 #if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE)
1068 .modalias = "adt7310",
1069 .max_speed_hz = 1000000,
1070 .irq = IRQ_PG5, /* CT alarm event. Line 0 */
1072 .chip_select = 4, /* CS, change it for your board */
1073 .platform_data = adt7310_platform_data,
1074 .controller_data = &adt7310_spi_chip_info,
1079 #if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE)
1081 .modalias = "ad7298",
1082 .max_speed_hz = 1000000,
1084 .chip_select = 4, /* CS, change it for your board */
1085 .platform_data = ad7298_platform_data,
1090 #if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE)
1092 .modalias = "adt7316",
1093 .max_speed_hz = 1000000,
1094 .irq = IRQ_PG5, /* interrupt line */
1096 .chip_select = 4, /* CS, change it for your board */
1097 .platform_data = adt7316_spi_data,
1098 .controller_data = &adt7316_spi_chip_info,
1103 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
1105 .modalias = "mmc_spi",
1106 .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
1109 .platform_data = &bfin_mmc_spi_pdata,
1110 .controller_data = &mmc_spi_chip_info,
1114 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
1116 .modalias = "ad7877",
1117 .platform_data = &bfin_ad7877_ts_info,
1119 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
1124 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
1126 .modalias = "ad7879",
1127 .platform_data = &bfin_ad7879_ts_info,
1129 .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
1132 .mode = SPI_CPHA | SPI_CPOL,
1135 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
1137 .modalias = "spidev",
1138 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
1143 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
1145 .modalias = "bfin-lq035q1-spi",
1146 .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
1149 .mode = SPI_CPHA | SPI_CPOL,
1152 #if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
1154 .modalias = "enc28j60",
1155 .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
1158 .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */
1159 .controller_data = &enc28j60_spi_chip_info,
1163 #if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
1165 .modalias = "adxl34x",
1166 .platform_data = &adxl34x_info,
1168 .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
1174 #if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE)
1176 .modalias = "adf702x",
1177 .max_speed_hz = 16000000, /* max spi clock (SCK) speed in HZ */
1179 .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */
1180 .platform_data = &adf7021_platform_data,
1184 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
1186 .modalias = "ads7846",
1187 .max_speed_hz = 2000000, /* max spi clock (SCK) speed in HZ */
1190 .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */
1191 .platform_data = &ad7873_pdata,
1195 #if defined(CONFIG_AD7476) \
1196 || defined(CONFIG_AD7476_MODULE)
1198 .modalias = "ad7476", /* Name of spi_driver for this device */
1199 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
1200 .bus_num = 0, /* Framework bus number */
1201 .chip_select = 1, /* Framework chip select. */
1202 .platform_data = NULL, /* No spi_driver specific config */
1203 .controller_data = &spi_ad7476_chip_info,
1207 #if defined(CONFIG_ADE7753) \
1208 || defined(CONFIG_ADE7753_MODULE)
1210 .modalias = "ade7753",
1211 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1213 .chip_select = 1, /* CS, change it for your board */
1214 .platform_data = NULL, /* No spi_driver specific config */
1218 #if defined(CONFIG_ADE7754) \
1219 || defined(CONFIG_ADE7754_MODULE)
1221 .modalias = "ade7754",
1222 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1224 .chip_select = 1, /* CS, change it for your board */
1225 .platform_data = NULL, /* No spi_driver specific config */
1229 #if defined(CONFIG_ADE7758) \
1230 || defined(CONFIG_ADE7758_MODULE)
1232 .modalias = "ade7758",
1233 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1235 .chip_select = 1, /* CS, change it for your board */
1236 .platform_data = NULL, /* No spi_driver specific config */
1240 #if defined(CONFIG_ADE7759) \
1241 || defined(CONFIG_ADE7759_MODULE)
1243 .modalias = "ade7759",
1244 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1246 .chip_select = 1, /* CS, change it for your board */
1247 .platform_data = NULL, /* No spi_driver specific config */
1251 #if defined(CONFIG_ADE7854_SPI) \
1252 || defined(CONFIG_ADE7854_SPI_MODULE)
1254 .modalias = "ade7854",
1255 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1257 .chip_select = 1, /* CS, change it for your board */
1258 .platform_data = NULL, /* No spi_driver specific config */
1262 #if defined(CONFIG_ADIS16060) \
1263 || defined(CONFIG_ADIS16060_MODULE)
1265 .modalias = "adis16060_r",
1266 .max_speed_hz = 2900000, /* max spi clock (SCK) speed in HZ */
1268 .chip_select = MAX_CTRL_CS + 1, /* CS for read, change it for your board */
1269 .platform_data = NULL, /* No spi_driver specific config */
1273 .modalias = "adis16060_w",
1274 .max_speed_hz = 2900000, /* max spi clock (SCK) speed in HZ */
1276 .chip_select = 2, /* CS for write, change it for your board */
1277 .platform_data = NULL, /* No spi_driver specific config */
1281 #if defined(CONFIG_ADIS16130) \
1282 || defined(CONFIG_ADIS16130_MODULE)
1284 .modalias = "adis16130",
1285 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1287 .chip_select = 1, /* CS for read, change it for your board */
1288 .platform_data = NULL, /* No spi_driver specific config */
1292 #if defined(CONFIG_ADIS16201) \
1293 || defined(CONFIG_ADIS16201_MODULE)
1295 .modalias = "adis16201",
1296 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1298 .chip_select = 5, /* CS, change it for your board */
1299 .platform_data = NULL, /* No spi_driver specific config */
1304 #if defined(CONFIG_ADIS16203) \
1305 || defined(CONFIG_ADIS16203_MODULE)
1307 .modalias = "adis16203",
1308 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1310 .chip_select = 5, /* CS, change it for your board */
1311 .platform_data = NULL, /* No spi_driver specific config */
1316 #if defined(CONFIG_ADIS16204) \
1317 || defined(CONFIG_ADIS16204_MODULE)
1319 .modalias = "adis16204",
1320 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1322 .chip_select = 5, /* CS, change it for your board */
1323 .platform_data = NULL, /* No spi_driver specific config */
1328 #if defined(CONFIG_ADIS16209) \
1329 || defined(CONFIG_ADIS16209_MODULE)
1331 .modalias = "adis16209",
1332 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1334 .chip_select = 5, /* CS, change it for your board */
1335 .platform_data = NULL, /* No spi_driver specific config */
1340 #if defined(CONFIG_ADIS16220) \
1341 || defined(CONFIG_ADIS16220_MODULE)
1343 .modalias = "adis16220",
1344 .max_speed_hz = 2000000, /* max spi clock (SCK) speed in HZ */
1346 .chip_select = 5, /* CS, change it for your board */
1347 .platform_data = NULL, /* No spi_driver specific config */
1352 #if defined(CONFIG_ADIS16240) \
1353 || defined(CONFIG_ADIS16240_MODULE)
1355 .modalias = "adis16240",
1356 .max_speed_hz = 1500000, /* max spi clock (SCK) speed in HZ */
1358 .chip_select = 5, /* CS, change it for your board */
1359 .platform_data = NULL, /* No spi_driver specific config */
1364 #if defined(CONFIG_ADIS16260) \
1365 || defined(CONFIG_ADIS16260_MODULE)
1367 .modalias = "adis16260",
1368 .max_speed_hz = 1500000, /* max spi clock (SCK) speed in HZ */
1370 .chip_select = 5, /* CS, change it for your board */
1371 .platform_data = NULL, /* No spi_driver specific config */
1376 #if defined(CONFIG_ADIS16261) \
1377 || defined(CONFIG_ADIS16261_MODULE)
1379 .modalias = "adis16261",
1380 .max_speed_hz = 2500000, /* max spi clock (SCK) speed in HZ */
1382 .chip_select = 1, /* CS, change it for your board */
1383 .platform_data = NULL, /* No spi_driver specific config */
1387 #if defined(CONFIG_ADIS16300) \
1388 || defined(CONFIG_ADIS16300_MODULE)
1390 .modalias = "adis16300",
1391 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1393 .chip_select = 5, /* CS, change it for your board */
1394 .platform_data = NULL, /* No spi_driver specific config */
1399 #if defined(CONFIG_ADIS16350) \
1400 || defined(CONFIG_ADIS16350_MODULE)
1402 .modalias = "adis16364",
1403 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1405 .chip_select = 5, /* CS, change it for your board */
1406 .platform_data = NULL, /* No spi_driver specific config */
1411 #if defined(CONFIG_ADIS16400) \
1412 || defined(CONFIG_ADIS16400_MODULE)
1414 .modalias = "adis16400",
1415 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1417 .chip_select = 1, /* CS, change it for your board */
1418 .platform_data = NULL, /* No spi_driver specific config */
1424 #if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
1425 /* SPI controller data */
1426 static struct bfin5xx_spi_master bfin_spi0_info = {
1427 .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
1428 .enable_dma = 1, /* master has the ability to do dma transfer */
1429 .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
1433 static struct resource bfin_spi0_resource[] = {
1435 .start = SPI0_REGBASE,
1436 .end = SPI0_REGBASE + 0xFF,
1437 .flags = IORESOURCE_MEM,
1442 .flags = IORESOURCE_DMA,
1447 .flags = IORESOURCE_IRQ,
1451 static struct platform_device bfin_spi0_device = {
1453 .id = 0, /* Bus number */
1454 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
1455 .resource = bfin_spi0_resource,
1457 .platform_data = &bfin_spi0_info, /* Passed to driver */
1460 #endif /* spi master and devices */
1462 #if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
1464 /* SPORT SPI controller data */
1465 static struct bfin5xx_spi_master bfin_sport_spi0_info = {
1466 .num_chipselect = MAX_BLACKFIN_GPIOS,
1467 .enable_dma = 0, /* master don't support DMA */
1468 .pin_req = {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_DRPRI,
1469 P_SPORT0_RSCLK, P_SPORT0_TFS, P_SPORT0_RFS, 0},
1472 static struct resource bfin_sport_spi0_resource[] = {
1474 .start = SPORT0_TCR1,
1475 .end = SPORT0_TCR1 + 0xFF,
1476 .flags = IORESOURCE_MEM,
1479 .start = IRQ_SPORT0_ERROR,
1480 .end = IRQ_SPORT0_ERROR,
1481 .flags = IORESOURCE_IRQ,
1485 static struct platform_device bfin_sport_spi0_device = {
1486 .name = "bfin-sport-spi",
1487 .id = 1, /* Bus number */
1488 .num_resources = ARRAY_SIZE(bfin_sport_spi0_resource),
1489 .resource = bfin_sport_spi0_resource,
1491 .platform_data = &bfin_sport_spi0_info, /* Passed to driver */
1495 static struct bfin5xx_spi_master bfin_sport_spi1_info = {
1496 .num_chipselect = MAX_BLACKFIN_GPIOS,
1497 .enable_dma = 0, /* master don't support DMA */
1498 .pin_req = {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_DRPRI,
1499 P_SPORT1_RSCLK, P_SPORT1_TFS, P_SPORT1_RFS, 0},
1502 static struct resource bfin_sport_spi1_resource[] = {
1504 .start = SPORT1_TCR1,
1505 .end = SPORT1_TCR1 + 0xFF,
1506 .flags = IORESOURCE_MEM,
1509 .start = IRQ_SPORT1_ERROR,
1510 .end = IRQ_SPORT1_ERROR,
1511 .flags = IORESOURCE_IRQ,
1515 static struct platform_device bfin_sport_spi1_device = {
1516 .name = "bfin-sport-spi",
1517 .id = 2, /* Bus number */
1518 .num_resources = ARRAY_SIZE(bfin_sport_spi1_resource),
1519 .resource = bfin_sport_spi1_resource,
1521 .platform_data = &bfin_sport_spi1_info, /* Passed to driver */
1525 #endif /* sport spi master and devices */
1527 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
1528 static struct platform_device bfin_fb_device = {
1529 .name = "bf537_lq035",
1533 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
1534 #include <asm/bfin-lq035q1.h>
1536 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
1537 .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
1538 .ppi_mode = USE_RGB565_16_BIT_PPI,
1539 .use_bl = 0, /* let something else control the LCD Blacklight */
1540 .gpio_bl = GPIO_PF7,
1543 static struct resource bfin_lq035q1_resources[] = {
1545 .start = IRQ_PPI_ERROR,
1546 .end = IRQ_PPI_ERROR,
1547 .flags = IORESOURCE_IRQ,
1551 static struct platform_device bfin_lq035q1_device = {
1552 .name = "bfin-lq035q1",
1554 .num_resources = ARRAY_SIZE(bfin_lq035q1_resources),
1555 .resource = bfin_lq035q1_resources,
1557 .platform_data = &bfin_lq035q1_data,
1562 #if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
1563 || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
1564 #include <linux/videodev2.h>
1565 #include <media/blackfin/bfin_capture.h>
1566 #include <media/blackfin/ppi.h>
1568 static const unsigned short ppi_req[] = {
1569 P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
1570 P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
1571 P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
1575 static const struct ppi_info ppi_info = {
1576 .type = PPI_TYPE_PPI,
1578 .irq_err = IRQ_PPI_ERROR,
1579 .base = (void __iomem *)PPI_CONTROL,
1583 #if defined(CONFIG_VIDEO_VS6624) \
1584 || defined(CONFIG_VIDEO_VS6624_MODULE)
1585 static struct v4l2_input vs6624_inputs[] = {
1589 .type = V4L2_INPUT_TYPE_CAMERA,
1590 .std = V4L2_STD_UNKNOWN,
1594 static struct bcap_route vs6624_routes[] = {
1601 static const unsigned vs6624_ce_pin = GPIO_PF10;
1603 static struct bfin_capture_config bfin_capture_data = {
1604 .card_name = "BF537",
1605 .inputs = vs6624_inputs,
1606 .num_inputs = ARRAY_SIZE(vs6624_inputs),
1607 .routes = vs6624_routes,
1608 .i2c_adapter_id = 0,
1612 .platform_data = (void *)&vs6624_ce_pin,
1614 .ppi_info = &ppi_info,
1615 .ppi_control = (PACK_EN | DLEN_8 | XFR_TYPE | 0x0020),
1619 static struct platform_device bfin_capture_device = {
1620 .name = "bfin_capture",
1622 .platform_data = &bfin_capture_data,
1627 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
1628 #ifdef CONFIG_SERIAL_BFIN_UART0
1629 static struct resource bfin_uart0_resources[] = {
1632 .end = UART0_GCTL+2,
1633 .flags = IORESOURCE_MEM,
1636 .start = IRQ_UART0_TX,
1637 .end = IRQ_UART0_TX,
1638 .flags = IORESOURCE_IRQ,
1641 .start = IRQ_UART0_RX,
1642 .end = IRQ_UART0_RX,
1643 .flags = IORESOURCE_IRQ,
1646 .start = IRQ_UART0_ERROR,
1647 .end = IRQ_UART0_ERROR,
1648 .flags = IORESOURCE_IRQ,
1651 .start = CH_UART0_TX,
1653 .flags = IORESOURCE_DMA,
1656 .start = CH_UART0_RX,
1658 .flags = IORESOURCE_DMA,
1660 #ifdef CONFIG_BFIN_UART0_CTSRTS
1664 .flags = IORESOURCE_IO,
1669 .flags = IORESOURCE_IO,
1674 static unsigned short bfin_uart0_peripherals[] = {
1675 P_UART0_TX, P_UART0_RX, 0
1678 static struct platform_device bfin_uart0_device = {
1679 .name = "bfin-uart",
1681 .num_resources = ARRAY_SIZE(bfin_uart0_resources),
1682 .resource = bfin_uart0_resources,
1684 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
1688 #ifdef CONFIG_SERIAL_BFIN_UART1
1689 static struct resource bfin_uart1_resources[] = {
1692 .end = UART1_GCTL+2,
1693 .flags = IORESOURCE_MEM,
1696 .start = IRQ_UART1_TX,
1697 .end = IRQ_UART1_TX,
1698 .flags = IORESOURCE_IRQ,
1701 .start = IRQ_UART1_RX,
1702 .end = IRQ_UART1_RX,
1703 .flags = IORESOURCE_IRQ,
1706 .start = IRQ_UART1_ERROR,
1707 .end = IRQ_UART1_ERROR,
1708 .flags = IORESOURCE_IRQ,
1711 .start = CH_UART1_TX,
1713 .flags = IORESOURCE_DMA,
1716 .start = CH_UART1_RX,
1718 .flags = IORESOURCE_DMA,
1722 static unsigned short bfin_uart1_peripherals[] = {
1723 P_UART1_TX, P_UART1_RX, 0
1726 static struct platform_device bfin_uart1_device = {
1727 .name = "bfin-uart",
1729 .num_resources = ARRAY_SIZE(bfin_uart1_resources),
1730 .resource = bfin_uart1_resources,
1732 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
1738 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
1739 #ifdef CONFIG_BFIN_SIR0
1740 static struct resource bfin_sir0_resources[] = {
1742 .start = 0xFFC00400,
1744 .flags = IORESOURCE_MEM,
1747 .start = IRQ_UART0_RX,
1748 .end = IRQ_UART0_RX+1,
1749 .flags = IORESOURCE_IRQ,
1752 .start = CH_UART0_RX,
1753 .end = CH_UART0_RX+1,
1754 .flags = IORESOURCE_DMA,
1758 static struct platform_device bfin_sir0_device = {
1761 .num_resources = ARRAY_SIZE(bfin_sir0_resources),
1762 .resource = bfin_sir0_resources,
1765 #ifdef CONFIG_BFIN_SIR1
1766 static struct resource bfin_sir1_resources[] = {
1768 .start = 0xFFC02000,
1770 .flags = IORESOURCE_MEM,
1773 .start = IRQ_UART1_RX,
1774 .end = IRQ_UART1_RX+1,
1775 .flags = IORESOURCE_IRQ,
1778 .start = CH_UART1_RX,
1779 .end = CH_UART1_RX+1,
1780 .flags = IORESOURCE_DMA,
1784 static struct platform_device bfin_sir1_device = {
1787 .num_resources = ARRAY_SIZE(bfin_sir1_resources),
1788 .resource = bfin_sir1_resources,
1793 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1794 static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
1796 static struct resource bfin_twi0_resource[] = {
1798 .start = TWI0_REGBASE,
1799 .end = TWI0_REGBASE,
1800 .flags = IORESOURCE_MEM,
1805 .flags = IORESOURCE_IRQ,
1809 static struct platform_device i2c_bfin_twi_device = {
1810 .name = "i2c-bfin-twi",
1812 .num_resources = ARRAY_SIZE(bfin_twi0_resource),
1813 .resource = bfin_twi0_resource,
1815 .platform_data = &bfin_twi0_pins,
1820 #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
1821 static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = {
1835 [13] = KEY_BACKSLASH,
1847 [26] = KEY_LEFTBRACE,
1848 [27] = KEY_RIGHTBRACE,
1861 [41] = KEY_SEMICOLON,
1862 [42] = KEY_APOSTROPHE,
1863 [43] = KEY_BACKSLASH,
1883 [65] = KEY_BACKSPACE,
1896 static struct adp5588_kpad_platform_data adp5588_kpad_data = {
1899 .keymap = adp5588_keymap,
1900 .keymapsize = ARRAY_SIZE(adp5588_keymap),
1905 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
1906 #include <linux/mfd/adp5520.h>
1909 * ADP5520/5501 Backlight Data
1912 static struct adp5520_backlight_platform_data adp5520_backlight_data = {
1913 .fade_in = ADP5520_FADE_T_1200ms,
1914 .fade_out = ADP5520_FADE_T_1200ms,
1915 .fade_led_law = ADP5520_BL_LAW_LINEAR,
1917 .abml_filt = ADP5520_BL_AMBL_FILT_640ms,
1918 .l1_daylight_max = ADP5520_BL_CUR_mA(15),
1919 .l1_daylight_dim = ADP5520_BL_CUR_mA(0),
1920 .l2_office_max = ADP5520_BL_CUR_mA(7),
1921 .l2_office_dim = ADP5520_BL_CUR_mA(0),
1922 .l3_dark_max = ADP5520_BL_CUR_mA(3),
1923 .l3_dark_dim = ADP5520_BL_CUR_mA(0),
1924 .l2_trip = ADP5520_L2_COMP_CURR_uA(700),
1925 .l2_hyst = ADP5520_L2_COMP_CURR_uA(50),
1926 .l3_trip = ADP5520_L3_COMP_CURR_uA(80),
1927 .l3_hyst = ADP5520_L3_COMP_CURR_uA(20),
1931 * ADP5520/5501 LEDs Data
1934 static struct led_info adp5520_leds[] = {
1936 .name = "adp5520-led1",
1937 .default_trigger = "none",
1938 .flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms,
1940 #ifdef ADP5520_EN_ALL_LEDS
1942 .name = "adp5520-led2",
1943 .default_trigger = "none",
1944 .flags = FLAG_ID_ADP5520_LED2_ADP5501_LED1,
1947 .name = "adp5520-led3",
1948 .default_trigger = "none",
1949 .flags = FLAG_ID_ADP5520_LED3_ADP5501_LED2,
1954 static struct adp5520_leds_platform_data adp5520_leds_data = {
1955 .num_leds = ARRAY_SIZE(adp5520_leds),
1956 .leds = adp5520_leds,
1957 .fade_in = ADP5520_FADE_T_600ms,
1958 .fade_out = ADP5520_FADE_T_600ms,
1959 .led_on_time = ADP5520_LED_ONT_600ms,
1966 static struct adp5520_gpio_platform_data adp5520_gpio_data = {
1968 .gpio_en_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2,
1969 .gpio_pullup_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2,
1973 * ADP5520 Keypad Data
1976 static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
1977 [ADP5520_KEY(0, 0)] = KEY_GRAVE,
1978 [ADP5520_KEY(0, 1)] = KEY_1,
1979 [ADP5520_KEY(0, 2)] = KEY_2,
1980 [ADP5520_KEY(0, 3)] = KEY_3,
1981 [ADP5520_KEY(1, 0)] = KEY_4,
1982 [ADP5520_KEY(1, 1)] = KEY_5,
1983 [ADP5520_KEY(1, 2)] = KEY_6,
1984 [ADP5520_KEY(1, 3)] = KEY_7,
1985 [ADP5520_KEY(2, 0)] = KEY_8,
1986 [ADP5520_KEY(2, 1)] = KEY_9,
1987 [ADP5520_KEY(2, 2)] = KEY_0,
1988 [ADP5520_KEY(2, 3)] = KEY_MINUS,
1989 [ADP5520_KEY(3, 0)] = KEY_EQUAL,
1990 [ADP5520_KEY(3, 1)] = KEY_BACKSLASH,
1991 [ADP5520_KEY(3, 2)] = KEY_BACKSPACE,
1992 [ADP5520_KEY(3, 3)] = KEY_ENTER,
1995 static struct adp5520_keys_platform_data adp5520_keys_data = {
1996 .rows_en_mask = ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0,
1997 .cols_en_mask = ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0,
1998 .keymap = adp5520_keymap,
1999 .keymapsize = ARRAY_SIZE(adp5520_keymap),
2004 * ADP5520/5501 Multifunction Device Init Data
2007 static struct adp5520_platform_data adp5520_pdev_data = {
2008 .backlight = &adp5520_backlight_data,
2009 .leds = &adp5520_leds_data,
2010 .gpio = &adp5520_gpio_data,
2011 .keys = &adp5520_keys_data,
2016 #if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
2017 static struct adp5588_gpio_platform_data adp5588_gpio_data = {
2019 .pullup_dis_mask = 0,
2023 #if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE)
2024 #include <linux/i2c/adp8870.h>
2025 static struct led_info adp8870_leds[] = {
2027 .name = "adp8870-led7",
2028 .default_trigger = "none",
2029 .flags = ADP8870_LED_D7 | ADP8870_LED_OFFT_600ms,
2034 static struct adp8870_backlight_platform_data adp8870_pdata = {
2035 .bl_led_assign = ADP8870_BL_D1 | ADP8870_BL_D2 | ADP8870_BL_D3 |
2036 ADP8870_BL_D4 | ADP8870_BL_D5 | ADP8870_BL_D6, /* 1 = Backlight 0 = Individual LED */
2037 .pwm_assign = 0, /* 1 = Enables PWM mode */
2039 .bl_fade_in = ADP8870_FADE_T_1200ms, /* Backlight Fade-In Timer */
2040 .bl_fade_out = ADP8870_FADE_T_1200ms, /* Backlight Fade-Out Timer */
2041 .bl_fade_law = ADP8870_FADE_LAW_CUBIC1, /* fade-on/fade-off transfer characteristic */
2043 .en_ambl_sens = 1, /* 1 = enable ambient light sensor */
2044 .abml_filt = ADP8870_BL_AMBL_FILT_320ms, /* Light sensor filter time */
2046 .l1_daylight_max = ADP8870_BL_CUR_mA(20), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2047 .l1_daylight_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2048 .l2_bright_max = ADP8870_BL_CUR_mA(14), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2049 .l2_bright_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2050 .l3_office_max = ADP8870_BL_CUR_mA(6), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2051 .l3_office_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2052 .l4_indoor_max = ADP8870_BL_CUR_mA(3), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2053 .l4_indor_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2054 .l5_dark_max = ADP8870_BL_CUR_mA(2), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2055 .l5_dark_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2057 .l2_trip = ADP8870_L2_COMP_CURR_uA(710), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
2058 .l2_hyst = ADP8870_L2_COMP_CURR_uA(73), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
2059 .l3_trip = ADP8870_L3_COMP_CURR_uA(389), /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
2060 .l3_hyst = ADP8870_L3_COMP_CURR_uA(54), /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
2061 .l4_trip = ADP8870_L4_COMP_CURR_uA(167), /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
2062 .l4_hyst = ADP8870_L4_COMP_CURR_uA(16), /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
2063 .l5_trip = ADP8870_L5_COMP_CURR_uA(43), /* use L5_COMP_CURR_uA(I) 0 <= I <= 138 uA */
2064 .l5_hyst = ADP8870_L5_COMP_CURR_uA(11), /* use L6_COMP_CURR_uA(I) 0 <= I <= 138 uA */
2066 .leds = adp8870_leds,
2067 .num_leds = ARRAY_SIZE(adp8870_leds),
2068 .led_fade_law = ADP8870_FADE_LAW_SQUARE, /* fade-on/fade-off transfer characteristic */
2069 .led_fade_in = ADP8870_FADE_T_600ms,
2070 .led_fade_out = ADP8870_FADE_T_600ms,
2071 .led_on_time = ADP8870_LED_ONT_200ms,
2075 #if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
2076 #include <linux/i2c/adp8860.h>
2077 static struct led_info adp8860_leds[] = {
2079 .name = "adp8860-led7",
2080 .default_trigger = "none",
2081 .flags = ADP8860_LED_D7 | ADP8860_LED_OFFT_600ms,
2085 static struct adp8860_backlight_platform_data adp8860_pdata = {
2086 .bl_led_assign = ADP8860_BL_D1 | ADP8860_BL_D2 | ADP8860_BL_D3 |
2087 ADP8860_BL_D4 | ADP8860_BL_D5 | ADP8860_BL_D6, /* 1 = Backlight 0 = Individual LED */
2089 .bl_fade_in = ADP8860_FADE_T_1200ms, /* Backlight Fade-In Timer */
2090 .bl_fade_out = ADP8860_FADE_T_1200ms, /* Backlight Fade-Out Timer */
2091 .bl_fade_law = ADP8860_FADE_LAW_CUBIC1, /* fade-on/fade-off transfer characteristic */
2093 .en_ambl_sens = 1, /* 1 = enable ambient light sensor */
2094 .abml_filt = ADP8860_BL_AMBL_FILT_320ms, /* Light sensor filter time */
2096 .l1_daylight_max = ADP8860_BL_CUR_mA(20), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2097 .l1_daylight_dim = ADP8860_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2098 .l2_office_max = ADP8860_BL_CUR_mA(6), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2099 .l2_office_dim = ADP8860_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2100 .l3_dark_max = ADP8860_BL_CUR_mA(2), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2101 .l3_dark_dim = ADP8860_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2103 .l2_trip = ADP8860_L2_COMP_CURR_uA(710), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
2104 .l2_hyst = ADP8860_L2_COMP_CURR_uA(73), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
2105 .l3_trip = ADP8860_L3_COMP_CURR_uA(43), /* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */
2106 .l3_hyst = ADP8860_L3_COMP_CURR_uA(11), /* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */
2108 .leds = adp8860_leds,
2109 .num_leds = ARRAY_SIZE(adp8860_leds),
2110 .led_fade_law = ADP8860_FADE_LAW_SQUARE, /* fade-on/fade-off transfer characteristic */
2111 .led_fade_in = ADP8860_FADE_T_600ms,
2112 .led_fade_out = ADP8860_FADE_T_600ms,
2113 .led_on_time = ADP8860_LED_ONT_200ms,
2117 #if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
2118 static struct regulator_consumer_supply ad5398_consumer = {
2119 .supply = "current",
2122 static struct regulator_init_data ad5398_regulator_data = {
2124 .name = "current range",
2126 .valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
2128 .num_consumer_supplies = 1,
2129 .consumer_supplies = &ad5398_consumer,
2132 #if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
2133 defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
2134 static struct platform_device ad5398_virt_consumer_device = {
2135 .name = "reg-virt-consumer",
2138 .platform_data = "current", /* Passed to driver */
2142 #if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
2143 defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
2144 static struct regulator_bulk_data ad5398_bulk_data = {
2145 .supply = "current",
2148 static struct regulator_userspace_consumer_data ad5398_userspace_comsumer_data = {
2151 .supplies = &ad5398_bulk_data,
2154 static struct platform_device ad5398_userspace_consumer_device = {
2155 .name = "reg-userspace-consumer",
2158 .platform_data = &ad5398_userspace_comsumer_data,
2164 #if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE)
2165 /* INT bound temperature alarm event. line 1 */
2166 static unsigned long adt7410_platform_data[2] = {
2167 IRQ_PG4, IRQF_TRIGGER_LOW,
2171 #if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE)
2172 /* INT bound temperature alarm event. line 1 */
2173 static unsigned long adt7316_i2c_data[2] = {
2174 IRQF_TRIGGER_LOW, /* interrupt flags */
2175 GPIO_PF4, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */
2179 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
2180 #ifdef CONFIG_SND_SOC_AD193X_I2C
2182 I2C_BOARD_INFO("ad1937", 0x04),
2186 #if defined(CONFIG_SND_SOC_ADAV80X) || defined(CONFIG_SND_SOC_ADAV80X_MODULE)
2188 I2C_BOARD_INFO("adav803", 0x10),
2192 #if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
2194 I2C_BOARD_INFO("ad7142_captouch", 0x2C),
2196 .platform_data = (void *)&ad7142_i2c_platform_data,
2200 #if defined(CONFIG_AD7150) || defined(CONFIG_AD7150_MODULE)
2202 I2C_BOARD_INFO("ad7150", 0x48),
2203 .irq = IRQ_PG5, /* fixme: use real interrupt number */
2207 #if defined(CONFIG_AD7152) || defined(CONFIG_AD7152_MODULE)
2209 I2C_BOARD_INFO("ad7152", 0x48),
2213 #if defined(CONFIG_AD774X) || defined(CONFIG_AD774X_MODULE)
2215 I2C_BOARD_INFO("ad774x", 0x48),
2219 #if defined(CONFIG_ADE7854_I2C) || defined(CONFIG_ADE7854_I2C_MODULE)
2221 I2C_BOARD_INFO("ade7854", 0x38),
2225 #if defined(CONFIG_ADT75) || defined(CONFIG_ADT75_MODULE)
2227 I2C_BOARD_INFO("adt75", 0x9),
2232 #if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE)
2234 I2C_BOARD_INFO("adt7410", 0x48),
2235 /* CT critical temperature event. line 0 */
2237 .platform_data = (void *)&adt7410_platform_data,
2241 #if defined(CONFIG_AD7291) || defined(CONFIG_AD7291_MODULE)
2243 I2C_BOARD_INFO("ad7291", 0x20),
2248 #if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE)
2250 I2C_BOARD_INFO("adt7316", 0x48),
2252 .platform_data = (void *)&adt7316_i2c_data,
2256 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
2258 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
2261 #if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
2263 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
2267 #if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
2269 I2C_BOARD_INFO("ad7879", 0x2F),
2271 .platform_data = (void *)&bfin_ad7879_ts_info,
2274 #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
2276 I2C_BOARD_INFO("adp5588-keys", 0x34),
2278 .platform_data = (void *)&adp5588_kpad_data,
2281 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
2283 I2C_BOARD_INFO("pmic-adp5520", 0x32),
2285 .platform_data = (void *)&adp5520_pdev_data,
2288 #if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
2290 I2C_BOARD_INFO("adxl34x", 0x53),
2292 .platform_data = (void *)&adxl34x_info,
2295 #if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
2297 I2C_BOARD_INFO("adp5588-gpio", 0x34),
2298 .platform_data = (void *)&adp5588_gpio_data,
2301 #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
2303 I2C_BOARD_INFO("bfin-adv7393", 0x2B),
2306 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
2308 I2C_BOARD_INFO("bf537-lq035-ad5280", 0x2F),
2311 #if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE)
2313 I2C_BOARD_INFO("adp8870", 0x2B),
2314 .platform_data = (void *)&adp8870_pdata,
2317 #if defined(CONFIG_SND_SOC_ADAU1371) || defined(CONFIG_SND_SOC_ADAU1371_MODULE)
2319 I2C_BOARD_INFO("adau1371", 0x1A),
2322 #if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE)
2324 I2C_BOARD_INFO("adau1761", 0x38),
2327 #if defined(CONFIG_SND_SOC_ADAU1361) || defined(CONFIG_SND_SOC_ADAU1361_MODULE)
2329 I2C_BOARD_INFO("adau1361", 0x38),
2332 #if defined(CONFIG_SND_SOC_ADAU1701) || defined(CONFIG_SND_SOC_ADAU1701_MODULE)
2334 I2C_BOARD_INFO("adau1701", 0x34),
2337 #if defined(CONFIG_AD525X_DPOT) || defined(CONFIG_AD525X_DPOT_MODULE)
2339 I2C_BOARD_INFO("ad5258", 0x18),
2342 #if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
2344 I2C_BOARD_INFO("ssm2602", 0x1b),
2347 #if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
2349 I2C_BOARD_INFO("ad5398", 0xC),
2350 .platform_data = (void *)&ad5398_regulator_data,
2353 #if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
2355 I2C_BOARD_INFO("adp8860", 0x2A),
2356 .platform_data = (void *)&adp8860_pdata,
2359 #if defined(CONFIG_SND_SOC_ADAU1373) || defined(CONFIG_SND_SOC_ADAU1373_MODULE)
2361 I2C_BOARD_INFO("adau1373", 0x1A),
2364 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
2366 I2C_BOARD_INFO("ad5252", 0x2e),
2370 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) \
2371 || defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE)
2372 unsigned short bfin_sport0_peripherals[] = {
2373 P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
2374 P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
2377 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
2378 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
2379 static struct resource bfin_sport0_uart_resources[] = {
2381 .start = SPORT0_TCR1,
2382 .end = SPORT0_MRCS3+4,
2383 .flags = IORESOURCE_MEM,
2386 .start = IRQ_SPORT0_RX,
2387 .end = IRQ_SPORT0_RX+1,
2388 .flags = IORESOURCE_IRQ,
2391 .start = IRQ_SPORT0_ERROR,
2392 .end = IRQ_SPORT0_ERROR,
2393 .flags = IORESOURCE_IRQ,
2397 static struct platform_device bfin_sport0_uart_device = {
2398 .name = "bfin-sport-uart",
2400 .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
2401 .resource = bfin_sport0_uart_resources,
2403 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
2407 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
2408 static struct resource bfin_sport1_uart_resources[] = {
2410 .start = SPORT1_TCR1,
2411 .end = SPORT1_MRCS3+4,
2412 .flags = IORESOURCE_MEM,
2415 .start = IRQ_SPORT1_RX,
2416 .end = IRQ_SPORT1_RX+1,
2417 .flags = IORESOURCE_IRQ,
2420 .start = IRQ_SPORT1_ERROR,
2421 .end = IRQ_SPORT1_ERROR,
2422 .flags = IORESOURCE_IRQ,
2426 static unsigned short bfin_sport1_peripherals[] = {
2427 P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
2428 P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
2431 static struct platform_device bfin_sport1_uart_device = {
2432 .name = "bfin-sport-uart",
2434 .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
2435 .resource = bfin_sport1_uart_resources,
2437 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
2442 #if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE)
2443 static struct resource bfin_sport0_resources[] = {
2445 .start = SPORT0_TCR1,
2446 .end = SPORT0_MRCS3+4,
2447 .flags = IORESOURCE_MEM,
2450 .start = IRQ_SPORT0_RX,
2451 .end = IRQ_SPORT0_RX+1,
2452 .flags = IORESOURCE_IRQ,
2455 .start = IRQ_SPORT0_TX,
2456 .end = IRQ_SPORT0_TX+1,
2457 .flags = IORESOURCE_IRQ,
2460 .start = IRQ_SPORT0_ERROR,
2461 .end = IRQ_SPORT0_ERROR,
2462 .flags = IORESOURCE_IRQ,
2465 .start = CH_SPORT0_TX,
2466 .end = CH_SPORT0_TX,
2467 .flags = IORESOURCE_DMA,
2470 .start = CH_SPORT0_RX,
2471 .end = CH_SPORT0_RX,
2472 .flags = IORESOURCE_DMA,
2475 static struct platform_device bfin_sport0_device = {
2476 .name = "bfin_sport_raw",
2478 .num_resources = ARRAY_SIZE(bfin_sport0_resources),
2479 .resource = bfin_sport0_resources,
2481 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
2485 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
2486 #define CF_IDE_NAND_CARD_USE_HDD_INTERFACE
2487 /* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */
2489 #ifdef CF_IDE_NAND_CARD_USE_HDD_INTERFACE
2490 #define PATA_INT IRQ_PF5
2491 static struct pata_platform_info bfin_pata_platform_data = {
2493 .irq_flags = IRQF_TRIGGER_HIGH,
2496 static struct resource bfin_pata_resources[] = {
2498 .start = 0x20314020,
2500 .flags = IORESOURCE_MEM,
2503 .start = 0x2031401C,
2505 .flags = IORESOURCE_MEM,
2510 .flags = IORESOURCE_IRQ,
2513 #elif defined(CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE)
2514 static struct pata_platform_info bfin_pata_platform_data = {
2517 /* CompactFlash Storage Card Memory Mapped Addressing
2520 static struct resource bfin_pata_resources[] = {
2522 .start = 0x20211800,
2524 .flags = IORESOURCE_MEM,
2527 .start = 0x2021180E, /* Device Ctl */
2529 .flags = IORESOURCE_MEM,
2534 static struct platform_device bfin_pata_device = {
2535 .name = "pata_platform",
2537 .num_resources = ARRAY_SIZE(bfin_pata_resources),
2538 .resource = bfin_pata_resources,
2540 .platform_data = &bfin_pata_platform_data,
2545 static const unsigned int cclk_vlev_datasheet[] =
2547 VRPAIR(VLEV_085, 250000000),
2548 VRPAIR(VLEV_090, 376000000),
2549 VRPAIR(VLEV_095, 426000000),
2550 VRPAIR(VLEV_100, 426000000),
2551 VRPAIR(VLEV_105, 476000000),
2552 VRPAIR(VLEV_110, 476000000),
2553 VRPAIR(VLEV_115, 476000000),
2554 VRPAIR(VLEV_120, 500000000),
2555 VRPAIR(VLEV_125, 533000000),
2556 VRPAIR(VLEV_130, 600000000),
2559 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
2560 .tuple_tab = cclk_vlev_datasheet,
2561 .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
2562 .vr_settling_time = 25 /* us */,
2565 static struct platform_device bfin_dpmc = {
2566 .name = "bfin dpmc",
2568 .platform_data = &bfin_dmpc_vreg_data,
2572 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
2573 defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
2575 #define SPORT_REQ(x) \
2576 [x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \
2577 P_SPORT##x##_RFS, P_SPORT##x##_DRPRI, P_SPORT##x##_RSCLK, 0}
2579 static const u16 bfin_snd_pin[][7] = {
2584 static struct bfin_snd_platform_data bfin_snd_data[] = {
2586 .pin_req = &bfin_snd_pin[0][0],
2589 .pin_req = &bfin_snd_pin[1][0],
2593 #define BFIN_SND_RES(x) \
2596 .start = SPORT##x##_TCR1, \
2597 .end = SPORT##x##_TCR1, \
2598 .flags = IORESOURCE_MEM \
2601 .start = CH_SPORT##x##_RX, \
2602 .end = CH_SPORT##x##_RX, \
2603 .flags = IORESOURCE_DMA, \
2606 .start = CH_SPORT##x##_TX, \
2607 .end = CH_SPORT##x##_TX, \
2608 .flags = IORESOURCE_DMA, \
2611 .start = IRQ_SPORT##x##_ERROR, \
2612 .end = IRQ_SPORT##x##_ERROR, \
2613 .flags = IORESOURCE_IRQ, \
2617 static struct resource bfin_snd_resources[][4] = {
2623 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
2624 static struct platform_device bfin_i2s_pcm = {
2625 .name = "bfin-i2s-pcm-audio",
2630 #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
2631 static struct platform_device bfin_ac97_pcm = {
2632 .name = "bfin-ac97-pcm-audio",
2637 #if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
2638 || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
2639 static const char * const ad1836_link[] = {
2643 static struct platform_device bfin_ad1836_machine = {
2644 .name = "bfin-snd-ad1836",
2647 .platform_data = (void *)ad1836_link,
2652 #if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \
2653 defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
2654 static const unsigned ad73311_gpio[] = {
2658 static struct platform_device bfin_ad73311_machine = {
2659 .name = "bfin-snd-ad73311",
2662 .platform_data = (void *)ad73311_gpio,
2667 #if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
2668 static struct platform_device bfin_ad73311_codec_device = {
2674 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) || \
2675 defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X_MODULE)
2676 static struct platform_device bfin_eval_adav801_device = {
2677 .name = "bfin-eval-adav801",
2682 #if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
2683 static struct platform_device bfin_i2s = {
2685 .id = CONFIG_SND_BF5XX_SPORT_NUM,
2686 .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
2687 .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
2689 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
2694 #if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
2695 static struct platform_device bfin_ac97 = {
2696 .name = "bfin-ac97",
2697 .id = CONFIG_SND_BF5XX_SPORT_NUM,
2698 .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
2699 .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
2701 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
2706 #if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
2707 #define REGULATOR_ADP122 "adp122"
2708 #define REGULATOR_ADP122_UV 2500000
2710 static struct regulator_consumer_supply adp122_consumers = {
2711 .supply = REGULATOR_ADP122,
2714 static struct regulator_init_data adp_switch_regulator_data = {
2716 .name = REGULATOR_ADP122,
2717 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2718 .min_uV = REGULATOR_ADP122_UV,
2719 .max_uV = REGULATOR_ADP122_UV,
2723 .num_consumer_supplies = 1, /* only 1 */
2724 .consumer_supplies = &adp122_consumers,
2727 static struct fixed_voltage_config adp_switch_pdata = {
2728 .supply_name = REGULATOR_ADP122,
2729 .microvolts = REGULATOR_ADP122_UV,
2732 .enabled_at_boot = 0,
2733 .init_data = &adp_switch_regulator_data,
2736 static struct platform_device adp_switch_device = {
2737 .name = "reg-fixed-voltage",
2740 .platform_data = &adp_switch_pdata,
2744 #if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
2745 defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
2746 static struct regulator_bulk_data adp122_bulk_data = {
2747 .supply = REGULATOR_ADP122,
2750 static struct regulator_userspace_consumer_data adp122_userspace_comsumer_data = {
2751 .name = REGULATOR_ADP122,
2753 .supplies = &adp122_bulk_data,
2756 static struct platform_device adp122_userspace_consumer_device = {
2757 .name = "reg-userspace-consumer",
2760 .platform_data = &adp122_userspace_comsumer_data,
2766 #if defined(CONFIG_IIO_GPIO_TRIGGER) || \
2767 defined(CONFIG_IIO_GPIO_TRIGGER_MODULE)
2769 static struct resource iio_gpio_trigger_resources[] = {
2773 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
2777 static struct platform_device iio_gpio_trigger = {
2778 .name = "iio_gpio_trigger",
2779 .num_resources = ARRAY_SIZE(iio_gpio_trigger_resources),
2780 .resource = iio_gpio_trigger_resources,
2784 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) || \
2785 defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373_MODULE)
2786 static struct platform_device bf5xx_adau1373_device = {
2787 .name = "bfin-eval-adau1373",
2791 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) || \
2792 defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701_MODULE)
2793 static struct platform_device bf5xx_adau1701_device = {
2794 .name = "bfin-eval-adau1701",
2798 static struct platform_device *stamp_devices[] __initdata = {
2801 #if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE)
2802 &bfin_sport0_device,
2804 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
2805 &bfin_pcmcia_cf_device,
2808 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
2812 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
2816 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
2817 &isp1362_hcd_device,
2820 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
2821 &bfin_isp1760_device,
2824 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
2828 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
2832 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
2836 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
2841 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
2842 &net2272_bfin_device,
2845 #if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
2849 #if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
2850 &bfin_sport_spi0_device,
2851 &bfin_sport_spi1_device,
2854 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
2858 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
2859 &bfin_lq035q1_device,
2862 #if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
2863 || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
2864 &bfin_capture_device,
2867 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
2868 #ifdef CONFIG_SERIAL_BFIN_UART0
2871 #ifdef CONFIG_SERIAL_BFIN_UART1
2876 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
2877 #ifdef CONFIG_BFIN_SIR0
2880 #ifdef CONFIG_BFIN_SIR1
2885 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
2886 &i2c_bfin_twi_device,
2889 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
2890 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
2891 &bfin_sport0_uart_device,
2893 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
2894 &bfin_sport1_uart_device,
2898 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
2902 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
2903 &bfin_device_gpiokeys,
2906 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
2907 &bfin_async_nand_device,
2910 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
2911 &stamp_flash_device,
2914 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
2918 #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
2922 #if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \
2923 defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
2924 &bfin_ad1836_machine,
2927 #if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \
2928 defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
2929 &bfin_ad73311_machine,
2932 #if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
2933 &bfin_ad73311_codec_device,
2936 #if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
2940 #if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
2944 #if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
2945 #if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
2946 defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
2947 &ad5398_virt_consumer_device,
2949 #if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
2950 defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
2951 &ad5398_userspace_consumer_device,
2955 #if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
2957 #if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
2958 defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
2959 &adp122_userspace_consumer_device,
2963 #if defined(CONFIG_IIO_GPIO_TRIGGER) || \
2964 defined(CONFIG_IIO_GPIO_TRIGGER_MODULE)
2968 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) || \
2969 defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373_MODULE)
2970 &bf5xx_adau1373_device,
2973 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) || \
2974 defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701_MODULE)
2975 &bf5xx_adau1701_device,
2978 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) || \
2979 defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X_MODULE)
2980 &bfin_eval_adav801_device,
2984 static int __init net2272_init(void)
2986 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
2989 ret = gpio_request(GPIO_PF6, "net2272");
2993 /* Reset the USB chip */
2994 gpio_direction_output(GPIO_PF6, 0);
2996 gpio_set_value(GPIO_PF6, 1);
3002 static int __init stamp_init(void)
3004 printk(KERN_INFO "%s(): registering device resources\n", __func__);
3005 bfin_plat_nand_init();
3007 platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
3008 i2c_register_board_info(0, bfin_i2c_board_info,
3009 ARRAY_SIZE(bfin_i2c_board_info));
3010 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
3013 pr_warning("unable to configure net2272; it probably won't work\n");
3018 arch_initcall(stamp_init);
3021 static struct platform_device *stamp_early_devices[] __initdata = {
3022 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
3023 #ifdef CONFIG_SERIAL_BFIN_UART0
3026 #ifdef CONFIG_SERIAL_BFIN_UART1
3031 #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
3032 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
3033 &bfin_sport0_uart_device,
3035 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
3036 &bfin_sport1_uart_device,
3041 void __init native_machine_early_platform_add_devices(void)
3043 printk(KERN_INFO "register early platform devices\n");
3044 early_platform_add_devices(stamp_early_devices,
3045 ARRAY_SIZE(stamp_early_devices));
3048 void native_machine_restart(char *cmd)
3050 /* workaround reboot hang when booting from SPI */
3051 if ((bfin_read_SYSCR() & 0x7) == 0x3)
3052 bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
3056 * Currently the MAC address is saved in Flash by U-Boot
3058 #define FLASH_MAC 0x203f0000
3059 int bfin_get_ether_addr(char *addr)
3061 *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC);
3062 *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4);
3065 EXPORT_SYMBOL(bfin_get_ether_addr);