arch/arm/mach-pxa/trizeps4.c

   1 /*
   2  *  linux/arch/arm/mach-pxa/trizeps4.c
   3  *
   4  *  Support for the Keith und Koep Trizeps4 Module Platform.
   5  *
   6  *  Author:     Jürgen Schindele
   7  *  Created:    20 02, 2006
   8  *  Copyright:  Jürgen Schindele
   9  *
  10  *  This program is free software; you can redistribute it and/or modify
  11  *  it under the terms of the GNU General Public License version 2 as
  12  *  published by the Free Software Foundation.
  13  */
  14
  15 #include <linux/init.h>
  16 #include <linux/kernel.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/sysdev.h>
  19 #include <linux/interrupt.h>
  20 #include <linux/sched.h>
  21 #include <linux/bitops.h>
  22 #include <linux/fb.h>
  23 #include <linux/ioport.h>
  24 #include <linux/delay.h>
  25 #include <linux/serial_8250.h>
  26 #include <linux/mtd/mtd.h>
  27 #include <linux/mtd/partitions.h>
  28
  29 #include <asm/types.h>
  30 #include <asm/setup.h>
  31 #include <asm/memory.h>
  32 #include <asm/mach-types.h>
  33 #include <asm/hardware.h>
  34 #include <asm/irq.h>
  35 #include <asm/sizes.h>
  36
  37 #include <asm/mach/arch.h>
  38 #include <asm/mach/map.h>
  39 #include <asm/mach/irq.h>
  40 #include <asm/mach/flash.h>
  41
  42 #include <asm/arch/pxa-regs.h>
  43 #include <asm/arch/trizeps4.h>
  44 #include <asm/arch/audio.h>
  45 #include <asm/arch/pxafb.h>
  46 #include <asm/arch/mmc.h>
  47 #include <asm/arch/irda.h>
  48 #include <asm/arch/ohci.h>
  49
  50 #include "generic.h"
  51
  52 /********************************************************************************************
  53  * ONBOARD FLASH
  54  ********************************************************************************************/
  55 static struct mtd_partition trizeps4_partitions[] = {
  56         {
  57                 .name =         "Bootloader",
  58                 .size =         0x00040000,
  59                 .offset =       0,
  60                 .mask_flags =   MTD_WRITEABLE  /* force read-only */
  61         },{
  62                 .name =         "Kernel",
  63                 .size =         0x00400000,
  64                 .offset =       0x00040000
  65         },{
  66                 .name =         "Filesystem",
  67                 .size =         MTDPART_SIZ_FULL,
  68                 .offset =       0x00440000
  69         }
  70 };
  71
  72 static struct flash_platform_data trizeps4_flash_data[] = {
  73         {
  74                 .map_name       = "cfi_probe",
  75                 .parts          = trizeps4_partitions,
  76                 .nr_parts       = ARRAY_SIZE(trizeps4_partitions)
  77         }
  78 };
  79
  80 static struct resource flash_resource = {
  81         .start  = PXA_CS0_PHYS,
  82         .end    = PXA_CS0_PHYS + SZ_64M - 1,
  83         .flags  = IORESOURCE_MEM,
  84 };
  85
  86 static struct platform_device flash_device = {
  87         .name           = "pxa2xx-flash",
  88         .id             = 0,
  89         .dev = {
  90                 .platform_data = &trizeps4_flash_data,
  91         },
  92         .resource = &flash_resource,
  93         .num_resources = 1,
  94 };
  95
  96 /********************************************************************************************
  97  * DAVICOM DM9000 Ethernet
  98  ********************************************************************************************/
  99 static struct resource dm9000_resources[] = {
 100         [0] = {
 101                 .start  = TRIZEPS4_ETH_PHYS+0x300,
 102                 .end    = TRIZEPS4_ETH_PHYS+0x400-1,
 103                 .flags  = IORESOURCE_MEM,
 104         },
 105         [1] = {
 106                 .start  = TRIZEPS4_ETH_PHYS+0x8300,
 107                 .end    = TRIZEPS4_ETH_PHYS+0x8400-1,
 108                 .flags  = IORESOURCE_MEM,
 109         },
 110         [2] = {
 111                 .start  = TRIZEPS4_ETH_IRQ,
 112                 .end    = TRIZEPS4_ETH_IRQ,
 113                 .flags  = (IORESOURCE_IRQ | IRQT_RISING),
 114         },
 115 };
 116
 117 static struct platform_device dm9000_device = {
 118         .name           = "dm9000",
 119         .id             = -1,
 120         .num_resources  = ARRAY_SIZE(dm9000_resources),
 121         .resource       = dm9000_resources,
 122 };
 123
 124 /********************************************************************************************
 125  * PXA270 serial ports
 126  ********************************************************************************************/
 127 static struct plat_serial8250_port tri_serial_ports[] = {
 128 #ifdef CONFIG_SERIAL_PXA
 129         /* this uses the own PXA driver */
 130         {
 131                 0,
 132         },
 133 #else
 134         /* this uses the generic 8520 driver */
 135         [0] = {
 136                 .membase        = (void *)&FFUART,
 137                 .irq            = IRQ_FFUART,
 138                 .flags          = UPF_BOOT_AUTOCONF,
 139                 .iotype         = UPIO_MEM32,
 140                 .regshift       = 2,
 141                 .uartclk        = (921600*16),
 142         },
 143         [1] = {
 144                 .membase        = (void *)&BTUART,
 145                 .irq            = IRQ_BTUART,
 146                 .flags          = UPF_BOOT_AUTOCONF,
 147                 .iotype         = UPIO_MEM32,
 148                 .regshift       = 2,
 149                 .uartclk        = (921600*16),
 150         },
 151         {
 152                 0,
 153         },
 154 #endif
 155 };
 156
 157 static struct platform_device uart_devices = {
 158         .name           = "serial8250",
 159         .id             = 0,
 160         .dev            = {
 161                 .platform_data  = tri_serial_ports,
 162         },
 163         .num_resources  = 0,
 164         .resource       = NULL,
 165 };
 166
 167 /********************************************************************************************
 168  * PXA270 ac97 sound codec
 169  ********************************************************************************************/
 170 static struct platform_device ac97_audio_device = {
 171         .name           = "pxa2xx-ac97",
 172         .id             = -1,
 173 };
 174
 175 static struct platform_device * trizeps4_devices[] __initdata = {
 176         &flash_device,
 177         &uart_devices,
 178         &dm9000_device,
 179         &ac97_audio_device,
 180 };
 181
 182 #ifdef CONFIG_MACH_TRIZEPS4_CONXS
 183 static short trizeps_conxs_bcr;
 184
 185 /* PCCARD power switching supports only 3,3V */
 186 void board_pcmcia_power(int power)
 187 {
 188         if (power) {
 189                 /* switch power on, put in reset and enable buffers */
 190                 trizeps_conxs_bcr |= power;
 191                 trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
 192                 trizeps_conxs_bcr &= ~(ConXS_BCR_CF_BUF_EN);
 193                 ConXS_BCR = trizeps_conxs_bcr;
 194                 /* wait a little */
 195                 udelay(2000);
 196                 /* take reset away */
 197                 trizeps_conxs_bcr &= ~(ConXS_BCR_CF_RESET);
 198                 ConXS_BCR = trizeps_conxs_bcr;
 199                 udelay(2000);
 200         } else {
 201                 /* put in reset */
 202                 trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
 203                 ConXS_BCR = trizeps_conxs_bcr;
 204                 udelay(1000);
 205                 /* switch power off */
 206                 trizeps_conxs_bcr &= ~(0xf);
 207                 ConXS_BCR = trizeps_conxs_bcr;
 208
 209         }
 210         pr_debug("%s: o%s 0x%x\n", __FUNCTION__, power ? "n": "ff", trizeps_conxs_bcr);
 211 }
 212
 213 /* backlight power switching for LCD panel */
 214 static void board_backlight_power(int on)
 215 {
 216         if (on) {
 217                 trizeps_conxs_bcr |= ConXS_BCR_L_DISP;
 218         } else {
 219                 trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP;
 220         }
 221         pr_debug("%s: o%s 0x%x\n", __FUNCTION__, on ? "n" : "ff", trizeps_conxs_bcr);
 222         ConXS_BCR = trizeps_conxs_bcr;
 223 }
 224
 225 /* Powersupply for MMC/SD cardslot */
 226 static void board_mci_power(struct device *dev, unsigned int vdd)
 227 {
 228         struct pxamci_platform_data* p_d = dev->platform_data;
 229
 230         if (( 1 << vdd) & p_d->ocr_mask) {
 231                 pr_debug("%s: on\n", __FUNCTION__);
 232                 /* FIXME fill in values here */
 233         } else {
 234                 pr_debug("%s: off\n", __FUNCTION__);
 235                 /* FIXME fill in values here */
 236         }
 237 }
 238
 239 static short trizeps_conxs_ircr;
 240
 241 /* Switch modes and Power for IRDA receiver */
 242 static void board_irda_mode(struct device *dev, int mode)
 243 {
 244         unsigned long flags;
 245
 246         local_irq_save(flags);
 247         if (mode & IR_SIRMODE) {
 248                 /* Slow mode */
 249                 trizeps_conxs_ircr &= ~ConXS_IRCR_MODE;
 250         } else if (mode & IR_FIRMODE) {
 251                 /* Fast mode */
 252                 trizeps_conxs_ircr |= ConXS_IRCR_MODE;
 253         }
 254         if (mode & IR_OFF) {
 255                 trizeps_conxs_ircr |= ConXS_IRCR_SD;
 256         } else {
 257                 trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
 258         }
 259         /* FIXME write values to register */
 260         local_irq_restore(flags);
 261 }
 262
 263 #else
 264 /* for other baseboards define dummies */
 265 void board_pcmcia_power(int power)      {;}
 266 #define board_backlight_power           NULL
 267 #define board_mci_power                 NULL
 268 #define board_irda_mode                 NULL
 269
 270 #endif          /* CONFIG_MACH_TRIZEPS4_CONXS */
 271 EXPORT_SYMBOL(board_pcmcia_power);
 272
 273 static int trizeps4_mci_init(struct device *dev, irqreturn_t (*mci_detect_int)(int, void *, struct pt_regs *), void *data)
 274 {
 275         int err;
 276         /* setup GPIO for PXA27x MMC controller */
 277         pxa_gpio_mode(GPIO32_MMCCLK_MD);
 278         pxa_gpio_mode(GPIO112_MMCCMD_MD);
 279         pxa_gpio_mode(GPIO92_MMCDAT0_MD);
 280         pxa_gpio_mode(GPIO109_MMCDAT1_MD);
 281         pxa_gpio_mode(GPIO110_MMCDAT2_MD);
 282         pxa_gpio_mode(GPIO111_MMCDAT3_MD);
 283
 284         pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
 285
 286         err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int, SA_INTERRUPT | SA_TRIGGER_RISING, "MMC card detect", data);
 287         if (err) {
 288                 printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
 289                 return -1;
 290         }
 291         return 0;
 292 }
 293
 294 static void trizeps4_mci_exit(struct device *dev, void *data)
 295 {
 296         free_irq(TRIZEPS4_MMC_IRQ, data);
 297 }
 298
 299 static struct pxamci_platform_data trizeps4_mci_platform_data = {
 300         .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 301         .init           = trizeps4_mci_init,
 302         .exit           = trizeps4_mci_exit,
 303         .setpower       = board_mci_power,
 304 };
 305
 306 static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
 307         .transceiver_cap  = IR_SIRMODE | IR_FIRMODE | IR_OFF,
 308         .transceiver_mode = board_irda_mode,
 309 };
 310
 311 static int trizeps4_ohci_init(struct device *dev)
 312 {
 313         /* setup Port1 GPIO pin. */
 314         pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN);  /* USBHPWR1 */
 315         pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */
 316
 317         /* Set the Power Control Polarity Low and Power Sense
 318            Polarity Low to active low. */
 319         UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
 320                 ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
 321
 322         return 0;
 323 }
 324
 325 static void trizeps4_ohci_exit(struct device *dev)
 326 {
 327         ;
 328 }
 329
 330 static struct pxaohci_platform_data trizeps4_ohci_platform_data = {
 331         .port_mode      = PMM_PERPORT_MODE,
 332         .init           = trizeps4_ohci_init,
 333         .exit           = trizeps4_ohci_exit,
 334 };
 335
 336 static struct map_desc trizeps4_io_desc[] __initdata = {
 337         {       /* ConXS CFSR */
 338                 .virtual        = TRIZEPS4_CFSR_VIRT,
 339                 .pfn            = __phys_to_pfn(TRIZEPS4_CFSR_PHYS),
 340                 .length         = 0x00001000,
 341                 .type           = MT_DEVICE
 342         },
 343         {       /* ConXS BCR */
 344                 .virtual        = TRIZEPS4_BOCR_VIRT,
 345                 .pfn            = __phys_to_pfn(TRIZEPS4_BOCR_PHYS),
 346                 .length         = 0x00001000,
 347                 .type           = MT_DEVICE
 348         },
 349         {       /* ConXS IRCR */
 350                 .virtual        = TRIZEPS4_IRCR_VIRT,
 351                 .pfn            = __phys_to_pfn(TRIZEPS4_IRCR_PHYS),
 352                 .length         = 0x00001000,
 353                 .type           = MT_DEVICE
 354         },
 355         {       /* ConXS DCR */
 356                 .virtual        = TRIZEPS4_DICR_VIRT,
 357                 .pfn            = __phys_to_pfn(TRIZEPS4_DICR_PHYS),
 358                 .length         = 0x00001000,
 359                 .type           = MT_DEVICE
 360         },
 361         {       /* ConXS UPSR */
 362                 .virtual        = TRIZEPS4_UPSR_VIRT,
 363                 .pfn            = __phys_to_pfn(TRIZEPS4_UPSR_PHYS),
 364                 .length         = 0x00001000,
 365                 .type           = MT_DEVICE
 366         }
 367 };
 368
 369 static struct pxafb_mach_info sharp_lcd __initdata = {
 370     .pixclock           = 78000,
 371     .xres               = 640,
 372     .yres               = 480,
 373     .bpp                = 8,
 374     .hsync_len          = 4,
 375     .left_margin        = 4,
 376     .right_margin       = 4,
 377     .vsync_len          = 2,
 378     .upper_margin       = 0,
 379     .lower_margin       = 0,
 380     .sync               = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 381     .cmap_greyscale     = 0,
 382     .cmap_inverse       = 0,
 383     .cmap_static        = 0,
 384     .lccr0              = LCCR0_Color | LCCR0_Pas | LCCR0_Dual,
 385     .lccr3              = 0x0340ff02,
 386     .pxafb_backlight_power = board_backlight_power,
 387 };
 388
 389 static void __init trizeps4_fixup(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi)
 390 {
 391 }
 392
 393 static void __init trizeps4_init(void)
 394 {
 395         platform_add_devices(trizeps4_devices, ARRAY_SIZE(trizeps4_devices));
 396
 397         set_pxa_fb_info(&sharp_lcd);
 398
 399         pxa_set_mci_info(&trizeps4_mci_platform_data);
 400         pxa_set_ficp_info(&trizeps4_ficp_platform_data);
 401         pxa_set_ohci_info(&trizeps4_ohci_platform_data);
 402 }
 403
 404 static void __init trizeps4_map_io(void)
 405 {
 406         pxa_map_io();
 407         iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
 408
 409         /* for DiskOnChip */
 410         pxa_gpio_mode(GPIO15_nCS_1_MD);
 411
 412         /* for off-module PIC on ConXS board */
 413         pxa_gpio_mode(GPIO_PIC | GPIO_IN);
 414
 415         /* UCB1400 irq */
 416         pxa_gpio_mode(GPIO_UCB1400 | GPIO_IN);
 417
 418         /* for DM9000 LAN */
 419         pxa_gpio_mode(GPIO78_nCS_2_MD);
 420         pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
 421
 422         /* for PCMCIA device */
 423         pxa_gpio_mode(GPIO_PCD | GPIO_IN);
 424         pxa_gpio_mode(GPIO_PRDY | GPIO_IN);
 425
 426         /* for I2C adapter */
 427         pxa_gpio_mode(GPIO117_I2CSCL_MD);
 428         pxa_gpio_mode(GPIO118_I2CSDA_MD);
 429
 430         /* MMC_DET s.o. */
 431         pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
 432
 433         /* whats that for ??? */
 434         pxa_gpio_mode(GPIO79_nCS_3_MD);
 435
 436         pxa_gpio_mode( GPIO_SYS_BUSY_LED  | GPIO_OUT);          /* LED1 */
 437         pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT);          /* LED2 */
 438
 439 #ifdef CONFIG_MACH_TRIZEPS4_CONXS
 440 #ifdef CONFIG_IDE_PXA_CF
 441         /* if boot direct from compact flash dont disable power */
 442         trizeps_conxs_bcr = 0x0009;
 443 #else
 444         /* this is the reset value */
 445         trizeps_conxs_bcr = 0x00A0;
 446 #endif
 447         ConXS_BCR = trizeps_conxs_bcr;
 448 #endif
 449
 450         PWER  = 0x00000002;
 451         PFER  = 0x00000000;
 452         PRER  = 0x00000002;
 453         PGSR0 = 0x0158C000;
 454         PGSR1 = 0x00FF0080;
 455         PGSR2 = 0x0001C004;
 456         /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
 457         PCFR |= PCFR_OPDE;
 458 }
 459
 460 MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
 461         /* MAINTAINER("Jürgen Schindele") */
 462         .phys_io        = 0x40000000,
 463         .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 464         .boot_params    = TRIZEPS4_SDRAM_BASE + 0x100,
 465         .fixup          = trizeps4_fixup,
 466         .init_machine   = trizeps4_init,
 467         .map_io         = trizeps4_map_io,
 468         .init_irq       = pxa_init_irq,
 469         .timer          = &pxa_timer,
 470 MACHINE_END
 471