2 * Copyright 2013 Maxime Ripard
4 * Maxime Ripard <maxime.ripard@free-electrons.com>
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
23 * b) Permission is hereby granted, free of charge, to any person
24 * obtaining a copy of this software and associated documentation
25 * files (the "Software"), to deal in the Software without
26 * restriction, including without limitation the rights to use,
27 * copy, modify, merge, publish, distribute, sublicense, and/or
28 * sell copies of the Software, and to permit persons to whom the
29 * Software is furnished to do so, subject to the following
32 * The above copyright notice and this permission notice shall be
33 * included in all copies or substantial portions of the Software.
35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 * OTHER DEALINGS IN THE SOFTWARE.
46 #include "sun5i-a10s.dtsi"
47 #include "sunxi-common-regulators.dtsi"
49 #include <dt-bindings/gpio/gpio.h>
50 #include <dt-bindings/input/input.h>
51 #include <dt-bindings/pinctrl/sun4i-a10.h>
54 model = "Olimex A10s-Olinuxino Micro";
55 compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s";
64 stdout-path = "serial0:115200n8";
68 compatible = "gpio-leds";
69 pinctrl-names = "default";
70 pinctrl-0 = <&led_pins_olinuxino>;
73 label = "a10s-olinuxino-micro:green:usr";
74 gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
85 pinctrl-names = "default";
86 pinctrl-0 = <&emac_pins_a>;
92 pinctrl-names = "default";
93 pinctrl-0 = <&i2c0_pins_a>;
98 pinctrl-names = "default";
99 pinctrl-0 = <&i2c1_pins_a>;
103 compatible = "at,24c16";
111 pinctrl-names = "default";
112 pinctrl-0 = <&i2c2_pins_a>;
117 vref-supply = <®_vcc3v0>;
122 linux,code = <KEY_VOLUMEUP>;
128 label = "Volume Down";
129 linux,code = <KEY_VOLUMEDOWN>;
136 linux,code = <KEY_MENU>;
143 linux,code = <KEY_ENTER>;
150 linux,code = <KEY_HOMEPAGE>;
159 phy1: ethernet-phy@1 {
165 pinctrl-names = "default";
166 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
167 vmmc-supply = <®_vcc3v3>;
169 cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
175 pinctrl-names = "default";
176 pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
177 vmmc-supply = <®_vcc3v3>;
179 cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
189 mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
190 allwinner,pins = "PG1";
191 allwinner,function = "gpio_in";
192 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
193 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
196 mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
197 allwinner,pins = "PG13";
198 allwinner,function = "gpio_in";
199 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
200 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
203 led_pins_olinuxino: led_pins@0 {
204 allwinner,pins = "PE3";
205 allwinner,function = "gpio_out";
206 allwinner,drive = <SUN4I_PINCTRL_20_MA>;
207 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
210 usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
211 allwinner,pins = "PB10";
212 allwinner,function = "gpio_out";
213 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
214 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
219 pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
220 gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
225 pinctrl-names = "default";
226 pinctrl-0 = <&uart0_pins_a>;
231 pinctrl-names = "default";
232 pinctrl-0 = <&uart2_pins_a>;
237 pinctrl-names = "default";
238 pinctrl-0 = <&uart3_pins_a>;
243 usb1_vbus-supply = <®_usb1_vbus>;